public void TestBasicNode2CodeWorkFlow4()
{
OpenModel(@"core\node2code\workflow4.dyn");
var nodes = CurrentDynamoModel.CurrentWorkspace.Nodes;
SelectAll(nodes);
var command = new DynamoModel.ConvertNodesToCodeCommand();
CurrentDynamoModel.ExecuteCommand(command);
Assert.AreEqual(3, CurrentDynamoModel.CurrentWorkspace.Connectors.Count());
Assert.AreEqual(3, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
var undo = new DynamoModel.UndoRedoCommand(DynamoModel.UndoRedoCommand.Operation.Undo);
CurrentDynamoModel.ExecuteCommand(undo);
Assert.AreEqual(4, CurrentDynamoModel.CurrentWorkspace.Connectors.Count());
Assert.AreEqual(4, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
}
private void TestNodeToCodeUndoBase(string filePath)
{
// Verify after undo all nodes and connectors should be resotored back
// to original state.
OpenModel(filePath);
var wp = CurrentDynamoModel.CurrentWorkspace;
var nodeGuids = wp.Nodes.Select(n => n.GUID).ToList();
nodeGuids.Sort();
var connectorGuids = wp.Connectors.Select(c => c.GUID).ToList();
connectorGuids.Sort();
SelectAll(wp.Nodes);
var command = new DynamoModel.ConvertNodesToCodeCommand();
CurrentDynamoModel.ExecuteCommand(command);
var undo = new DynamoModel.UndoRedoCommand(DynamoModel.UndoRedoCommand.Operation.Undo);
CurrentDynamoModel.ExecuteCommand(undo);
var curNodeGuids = wp.Nodes.Select(n => n.GUID).ToList();
curNodeGuids.Sort();
var curConnectorGuids = wp.Connectors.Select(c => c.GUID).ToList();
curConnectorGuids.Sort();
Assert.AreEqual(curNodeGuids.Count, nodeGuids.Count);
Assert.IsTrue(nodeGuids.SequenceEqual(curNodeGuids));
Assert.AreEqual(curConnectorGuids.Count, connectorGuids.Count);
Assert.IsTrue(connectorGuids.SequenceEqual(curConnectorGuids));
}
/// <summary>
/// Run the dyn file and get all preview values in string representation.
/// Then, iterate all nodes, for each iteration, choose a node and convert
/// the remaining nodes to code, and compare the preview value of this
/// node against with its original value; then undo, run and compare the
/// preview values of all nodes with original values.
/// </summary>
/// <param name="dynFilePath"></param>
protected void MutationTest(string dynFilePath)
{
CurrentDynamoModel.Scheduler.ProcessMode = TaskProcessMode.Asynchronous;
RunModel(dynFilePath);
// Block until all tasks are executed
while (CurrentDynamoModel.Scheduler.HasPendingTasks);
var allNodes = CurrentDynamoModel.CurrentWorkspace.Nodes.Select(n => n.GUID).ToList();
int nodeCount = allNodes.Count();
var previewMap = allNodes.ToDictionary(n => n, n => GetStringData(n));
var convertibleNodes = CurrentDynamoModel.CurrentWorkspace.Nodes
.Where(node => node.IsConvertible)
.Select(n => n.GUID).ToList();
int connectorCount = CurrentDynamoModel.CurrentWorkspace.Connectors.Count();
for (int i = 1; i <= Math.Min(convertibleNodes.Count(), 10); ++i)
{
var toBeConvertedNodes = convertibleNodes.Take(i);
var otherNodes = allNodes.Except(toBeConvertedNodes);
SelectAll(toBeConvertedNodes);
var command = new DynamoModel.ConvertNodesToCodeCommand();
CurrentDynamoModel.ExecuteCommand(command);
// Block until all tasks are executed
while (CurrentDynamoModel.Scheduler.HasPendingTasks);
foreach (var node in otherNodes)
{
// Verify after converting remaining nodes to code, the value
// of node that is not converted should remain same.
var preValue = previewMap[node];
var currentValue = GetStringData(node);
Assert.AreEqual(preValue, currentValue);
}
var undo = new DynamoModel.UndoRedoCommand(DynamoModel.UndoRedoCommand.Operation.Undo);
CurrentDynamoModel.ExecuteCommand(undo);
// Block until all tasks are executed
while (CurrentDynamoModel.Scheduler.HasPendingTasks) ;
// Verify after undo everything is OK
Assert.AreEqual(nodeCount, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
Assert.AreEqual(connectorCount, CurrentDynamoModel.CurrentWorkspace.Connectors.Count());
foreach (var node in CurrentDynamoModel.CurrentWorkspace.Nodes)
{
Assert.IsTrue(previewMap.ContainsKey(node.GUID));
var preValue = previewMap[node.GUID];
var currentValue = GetStringData(node.GUID);
Assert.AreEqual(preValue, currentValue);
}
}
}
public void TestBasicNode2CodeWorkFlow2()
{
// 1 -> Point.ByCoordinates ---+
// |---------------------------+
// +-- List.Create (index0) |-> Line.ByStartPointEndPoint
// +--> List.Create (index1) |
// |---------------------------+
// 2 -> Point.ByCoordinates ---+
OpenModel(@"core\node2code\workflow2.dyn");
var nodes = CurrentDynamoModel.CurrentWorkspace.Nodes;
SelectAll(nodes);
var command = new DynamoModel.ConvertNodesToCodeCommand();
CurrentDynamoModel.ExecuteCommand(command);
Assert.AreEqual(0, CurrentDynamoModel.CurrentWorkspace.Connectors.Count());
Assert.AreEqual(1, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
var undo = new DynamoModel.UndoRedoCommand(DynamoModel.UndoRedoCommand.Operation.Undo);
CurrentDynamoModel.ExecuteCommand(undo);
Assert.AreEqual(6, CurrentDynamoModel.CurrentWorkspace.Connectors.Count());
Assert.AreEqual(6, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
}
public void TestMultioutputNode()
{
// Regression MAGN-8009
OpenModel(@"core\node2code\multipleoutput.dyn");
var nodes = CurrentDynamoModel.CurrentWorkspace.Nodes;
SelectAll(nodes);
var functionNode = CurrentDynamoModel.CurrentWorkspace.Nodes.OfType<DSFunction>().FirstOrDefault();
var guid = functionNode.AstIdentifierGuid;
var command = new DynamoModel.ConvertNodesToCodeCommand();
CurrentDynamoModel.ExecuteCommand(command);
CurrentDynamoModel.ForceRun();
var cbn = CurrentDynamoModel.CurrentWorkspace.Nodes.OfType<CodeBlockNodeModel>().FirstOrDefault();
Assert.IsNotNull(cbn);
Assert.IsFalse(cbn.Code.Contains(guid));
}
public void TestUsingTypeDependentVariableName02()
{
OpenModel(@"core\node2code\num.dyn");
var nodes = CurrentDynamoModel.CurrentWorkspace.Nodes;
SelectAll(nodes);
var command = new DynamoModel.ConvertNodesToCodeCommand();
CurrentDynamoModel.ExecuteCommand(command);
var cbn = CurrentDynamoModel.CurrentWorkspace.Nodes.OfType<CodeBlockNodeModel>().FirstOrDefault();
Assert.IsNotNull(cbn);
Assert.IsTrue(cbn.GetAstIdentifierForOutputIndex(0).Value.StartsWith("num"));
}
public void TestNodeWithVarArgument()
{
OpenModel(@"core\node2code\splitstring.dyn");
var nodes = CurrentDynamoModel.CurrentWorkspace.Nodes;
SelectAll(nodes);
var command = new DynamoModel.ConvertNodesToCodeCommand();
CurrentDynamoModel.ExecuteCommand(command);
CurrentDynamoModel.ForceRun();
var cbn = CurrentDynamoModel.CurrentWorkspace.Nodes.OfType<CodeBlockNodeModel>().FirstOrDefault();
Assert.IsNotNull(cbn);
var guid = cbn.GUID.ToString();
AssertPreviewValue(guid, new[] { "foo", "bar", "qux" });
}
public void TestDirectoryToCode()
{
OpenModel(@"core\node2code\directory.dyn");
var nodes = CurrentDynamoModel.CurrentWorkspace.Nodes;
SelectAll(nodes);
var command = new DynamoModel.ConvertNodesToCodeCommand();
CurrentDynamoModel.ExecuteCommand(command);
var cbn = CurrentDynamoModel.CurrentWorkspace.Nodes.OfType<CodeBlockNodeModel>().FirstOrDefault();
Assert.IsNotNull(cbn);
Assert.IsTrue(cbn.Code.Contains(@"D:\\foo\\bar"));
}
/// <summary>
/// Run the dyn file and get all preview values in string representation.
/// Then, iterate all nodes, for each iteration, choose a node and convert
/// the remaining nodes to code, and compare the preview value of this
/// node against with its original value.
/// </summary>
/// <param name="dynFilePath"></param>
protected void MutationTest(string dynFilePath)
{
Dictionary<Guid, string> previewMap = new Dictionary<Guid, string>();
RunModel(dynFilePath);
foreach (var node in CurrentDynamoModel.CurrentWorkspace.Nodes)
{
previewMap[node.GUID] = GetStringData(node.GUID);
}
var nodes = CurrentDynamoModel.CurrentWorkspace.Nodes.Select(n => n.GUID).ToList();
foreach (var node in nodes)
{
SelectAllExcept(node);
var command = new DynamoModel.ConvertNodesToCodeCommand();
CurrentDynamoModel.ExecuteCommand(command);
CurrentDynamoModel.ForceRun();
var preValue = previewMap[node];
var currentValue = GetStringData(node);
Assert.AreEqual(preValue, currentValue);
var undo = new DynamoModel.UndoRedoCommand(DynamoModel.UndoRedoCommand.Operation.Undo);
CurrentDynamoModel.ExecuteCommand(undo);
}
}
/// <summary>
/// Run the dyn file and get all preview values in string representation.
/// Undo, force run and get all preview values in string representation.
/// These two sets of preview value should be the same.
/// </summary>
/// <param name="dynFilePath"></param>
protected void UndoTest(string dynFilePath)
{
Dictionary<Guid, string> previewMap = new Dictionary<Guid, string>();
RunModel(dynFilePath);
foreach (var node in CurrentDynamoModel.CurrentWorkspace.Nodes)
{
previewMap[node.GUID] = GetStringData(node.GUID);
}
int nodeCount = CurrentDynamoModel.CurrentWorkspace.Nodes.Count();
int connectorCount = CurrentDynamoModel.CurrentWorkspace.Connectors.Count();
SelectAll();
var command = new DynamoModel.ConvertNodesToCodeCommand();
CurrentDynamoModel.ExecuteCommand(command);
CurrentDynamoModel.ForceRun();
var undo = new DynamoModel.UndoRedoCommand(DynamoModel.UndoRedoCommand.Operation.Undo);
CurrentDynamoModel.ExecuteCommand(undo);
CurrentDynamoModel.ForceRun();
// Verify after undo everything is OK
Assert.AreEqual(nodeCount, CurrentDynamoModel.CurrentWorkspace.Nodes.Count());
Assert.AreEqual(connectorCount, CurrentDynamoModel.CurrentWorkspace.Connectors.Count());
foreach (var node in CurrentDynamoModel.CurrentWorkspace.Nodes)
{
Assert.IsTrue(previewMap.ContainsKey(node.GUID));
var preValue = previewMap[node.GUID];
var currentValue = GetStringData(node.GUID);
Assert.AreEqual(preValue, currentValue);
}
}
/// <summary>
/// After command framework is implemented, this method should now be only
/// called from a menu item (i.e. Ctrl + W). It should not be used as a
/// way for any other code paths to convert nodes to code programmatically.
/// For that we now have ConvertNodesToCodeInternal which takes in more
/// configurable arguments.
/// </summary>
/// <param name="parameters">This is not used and should always be null,
/// otherwise an ArgumentException will be thrown.</param>
///
internal void NodeToCode(object parameters)
{
if (null != parameters) // See above for details of this exception.
{
const string message = "Internal error, argument must be null";
throw new ArgumentException(message, "parameters");
}
var command = new DynamoModel.ConvertNodesToCodeCommand();
this.DynamoViewModel.ExecuteCommand(command);
}
