//iterates each bit of the 2 inputs and making or operation using "OR" gate - saves the output in Output
public BitwiseAndGate(int iSize)
: base(iSize)
{
for (int bit = 0; bit < iSize; bit++)
{
and_gate_per_bit = new AndGate();
and_gate_per_bit.ConnectInput1(Input1[bit]);
and_gate_per_bit.ConnectInput2(Input2[bit]);
Output[bit].ConnectInput(and_gate_per_bit.Output);
}
}
private Wire calc(Wire input1, Wire input2, int wireNum)
{
andGate = new AndGate();
andGate.ConnectInput1(input1);
andGate.ConnectInput2(input2);
if (wireNum < 0)
{
return(andGate.Output);
}
return(calc(andGate.Output, this.m_wsInput[wireNum], wireNum - 1));
}
public HalfAdder()
{
//your code here
ag = new AndGate();
xog = new XorGate();
ag.ConnectInput1(Input1);
ag.ConnectInput2(Input2);
xog.ConnectInput1(Input1);
xog.ConnectInput2(Input2);
CarryOutput = ag.Output;
Output = xog.Output;
}
public BitwiseAndGate(int iSize)
: base(iSize)
{
BitwiseAnd = new AndGate[iSize];
for (int i = 0; i < iSize; i++)
{
BitwiseAnd[i] = new AndGate();
BitwiseAnd[i].ConnectInput1(Input1[i]);
BitwiseAnd[i].ConnectInput2(Input2[i]);
Output[i].ConnectInput(BitwiseAnd[i].Output);
}
}
//nand gate is defines as not-AND gate, the procedure is completed using the AND,NOT gates.
public NAndGate()
{
and_input = new AndGate();
not_output = new NotGate();
and_input.ConnectInput1(Input1);
and_input.ConnectInput2(Input2);
not_output.ConnectInput(and_input.Output);
Output = not_output.Output;
}
public HalfAdder()
{
CarryOutput = new Wire();
and = new AndGate();
xor = new XorGate();
Input1 = and.Input1;
Input2 = and.Input2;
xor.ConnectInput1(Input1);
xor.ConnectInput2(Input2);
Output = xor.Output;
CarryOutput = and.Output;
}
//your code here
public HalfAdder()
{
//your code here
XorGate xor = new XorGate();
AndGate and = new AndGate();
xor.ConnectInput1(Input1);
xor.ConnectInput2(Input2);
and.ConnectInput1(Input2);
and.ConnectInput2(Input1);
Output = xor.Output;
CarryOutput = and.Output;
}
public HalfAdder()
{
CarryOutput = new Wire();
m_xorGate = new XorGate();
m_andGate = new AndGate();
m_xorGate.Input1.ConnectInput(Input1);
m_xorGate.Input2.ConnectInput(Input2);
Output.ConnectInput(m_xorGate.Output);
m_andGate.Input1.ConnectInput(Input1);
m_andGate.Input2.ConnectInput(Input2);
CarryOutput.ConnectInput(m_andGate.Output);
}
public HalfAdder()
{
CarryOutput = new Wire();
xor = new XorGate();
and = new AndGate();
xor.ConnectInput1(Input1);
xor.ConnectInput2(Input2);
and.ConnectInput1(Input1);
and.ConnectInput2(Input2);
CarryOutput.ConnectInput(and.Output);
Output.ConnectInput(xor.Output);
}
public BitwiseAndGate(int iSize)
: base(iSize)
{
and = new AndGate();
for (int i = 0; i < Size; i++)
{
and.ConnectInput1(Input1[i]);
and.ConnectInput2(Input2[i]);
Output[i].ConnectInput(and.Output);
and = new AndGate();
}
}
public HalfAdder()
{
//your code here
m_gXor = new XorGate();
m_gAnd = new AndGate();
m_gXor.ConnectInput1(Input1);
m_gXor.ConnectInput2(Input2);
Output.ConnectInput(m_gXor.Output);
m_gAnd.ConnectInput1(Input1);
m_gAnd.ConnectInput2(Input2);
CarryOutput = new Wire();
CarryOutput.ConnectInput(m_gAnd.Output);
}
//making and operation for 2 consecutive bits(wires) until the last bit. first bit is constant - 1
public MultiBitAndGate(int iInputCount)
: base(iInputCount)
{
size_of_wire = iInputCount;
result = new Wire();
result.Value = 1;
for (int bit = 0; bit < iInputCount; bit++)
{
and_operator = new AndGate();
and_operator.ConnectInput1(result);
and_operator.ConnectInput2(m_wsInput[bit]);
result = and_operator.Output;
}
Output = result;
}
public MultiBitAndGate(int iInputCount)
: base(iInputCount)
{
//your code here
and = new AndGate[iInputCount - 1];
and[0] = new AndGate();
and[0].ConnectInput1(m_wsInput[0]);
and[0].ConnectInput2(m_wsInput[1]);
for (int i = 2; i < iInputCount; i++)
{
and[i - 1] = new AndGate();
and[i - 1].ConnectInput1(and[i - 2].Output);
and[i - 1].ConnectInput2(m_wsInput[i]);
}
Output.ConnectInput(and[iInputCount - 2].Output);
}
public OrGate()
{
//init the gates
m_gNot1 = new NotGate(); //outside the parentheses
m_gNot2 = new NotGate(); //a
m_gNot3 = new NotGate(); //b
m_gAnd = new AndGate();
//connect the gates
m_gAnd.ConnectInput1(m_gNot2.Output);
m_gAnd.ConnectInput2(m_gNot3.Output);
m_gNot1.ConnectInput(m_gAnd.Output);
//set the inputs and the output of the or gate
Output = m_gNot1.Output;
Input1 = m_gNot2.Input;
Input2 = m_gNot3.Input;
}
//your code here
public MultiBitAndGate(int iInputCount)
: base(iInputCount)
{
AndGate[] and = new AndGate[iInputCount - 1]; // reminder - make the first one outside the for loop
and[0] = new AndGate();
and[0].ConnectInput1(m_wsInput[0]); //assuming there are at least two bits
and[0].ConnectInput2(m_wsInput[1]);
for (int i = 1; i < iInputCount - 1; i++)
{
and[i] = new AndGate();
and[i].ConnectInput1(and[i - 1].Output);
and[i].ConnectInput2(m_wsInput[i + 1]);
}
Output.ConnectInput(and[iInputCount - 2].Output);
}
public Demux()
{
Input = new Wire();
//your code here
Control = new Wire();
m_gNot = new NotGate();
m_gAnd1 = new AndGate();
m_gAnd2 = new AndGate();
m_gNot.ConnectInput(Control);
m_gAnd1.ConnectInput1(Input);
m_gAnd1.ConnectInput2(m_gNot.Output);
m_gAnd2.ConnectInput1(Control);
m_gAnd2.ConnectInput2(Input);
Output1 = m_gAnd1.Output;
Output2 = m_gAnd2.Output;
}
public HalfAdder()
{
CarryOutput = new Wire();
var gXor = new XorGate();
var gAnd = new AndGate();
Input1 = gAnd.Input1;
Input2 = gAnd.Input2;
gXor.ConnectInput1(Input1);
gXor.ConnectInput2(Input2);
Output = gXor.Output;
CarryOutput = gAnd.Output;
}
public XorGate()
{
or = new OrGate();
NAnd = new NAndGate();
and = new AndGate();
Input1 = or.Input1;
Input2 = or.Input2;
NAnd.ConnectInput1(Input1);
NAnd.ConnectInput2(Input2);
and.ConnectInput1(or.Output);
and.ConnectInput2(NAnd.Output);
Output = and.Output;
}
public MuxGate()
{
ControlInput = new Wire();
m_gNot = new NotGate();
m_gAnd1 = new AndGate();
m_gAnd2 = new AndGate();
m_gOr = new OrGate();
m_gAnd1.ConnectInput1(m_gNot.Output);
m_gOr.ConnectInput1(m_gAnd1.Output);
m_gOr.ConnectInput2(m_gAnd2.Output);
m_gNot.ConnectInput(ControlInput);
m_gAnd2.ConnectInput1(ControlInput);
Input1 = m_gAnd1.Input2;
Input2 = m_gAnd2.Input2;
Output = m_gOr.Output;
}
public XorGate()
{
m_gNand = new NAndGate();
m_gOr = new OrGate();
m_gAnd = new AndGate();
m_gOr.ConnectInput1(Input1);
m_gOr.ConnectInput2(Input2);
m_gNand.ConnectInput1(Input1);
m_gNand.ConnectInput2(Input2);
m_gAnd.ConnectInput1(m_gOr.Output);
m_gAnd.ConnectInput2(m_gNand.Output);
Output = m_gAnd.Output;
}
//Xor gate is possible to get by combining with and gate the results of the nand and or gates.
public XorGate()
{
nand_input = new NAndGate();
or_input = new OrGate();
and_output = new AndGate();
nand_input.ConnectInput1(Input1);
nand_input.ConnectInput2(Input2);
or_input.ConnectInput1(Input1);
or_input.ConnectInput2(Input2);
and_output.ConnectInput1(nand_input.Output);
and_output.ConnectInput2(or_input.Output);
Output = and_output.Output;
}
public BitwiseAndGate(int iSize)
: base(iSize)
{
m_gAnd = new AndGate[iSize];
WireSet ws_resault = new WireSet(iSize);
//your code here
for (int i = 0; i < iSize; i++)
{
m_gAnd[i] = new AndGate();
m_gAnd[i].ConnectInput1(Input1[i]);
m_gAnd[i].ConnectInput2(Input2[i]);
ws_resault[i].ConnectInput(m_gAnd[i].Output);
}
Output.ConnectInput(ws_resault);
}
//your code here
public Demux()
{
Input = new Wire();
Control = new Wire();
//init
AndGate and1 = new AndGate();
AndGate and2 = new AndGate();
NotGate not = new NotGate();
and1.ConnectInput1(Input);
and2.ConnectInput2(Input);
not.ConnectInput(Control);
and1.ConnectInput2(not.Output);
and2.ConnectInput1(Control);
Output1 = and1.Output;
Output2 = and2.Output;
}
public MuxGate()
{
ControlInput = new Wire();
m_gAndX = new AndGate();
m_gAndY = new AndGate();
m_gOr = new OrGate();
m_gNotC = new NotGate();
m_gAndY.ConnectInput1(ControlInput);
m_gAndY.ConnectInput2(Input2);
m_gNotC.ConnectInput(ControlInput);
m_gAndX.ConnectInput2(m_gNotC.Output);
m_gAndX.ConnectInput1(Input1);
m_gOr.ConnectInput1(m_gAndX.Output);
m_gOr.ConnectInput2(m_gAndY.Output);
Output = m_gOr.Output;
}
public XorGate()
{
//your code here
m_gAnd = new AndGate();
m_gNand = new NAndGate();
m_gOr = new OrGate();
m_gAnd.ConnectInput1(m_gNand.Output);
m_gAnd.ConnectInput2(m_gOr.Output);
Input1 = m_gOr.Input1;
Input2 = m_gOr.Input2;
m_gNand.ConnectInput1(Input1);
m_gNand.ConnectInput2(Input2);
Output = m_gAnd.Output;
}
// creating the halfadder by using the "xor" and "and gates" for the output and the carry
public HalfAdder()
{
// initilaize the gates
CarryOutput = new Wire();
xor_op = new XorGate();
and_op = new AndGate();
//xor operation for the sum output
xor_op.ConnectInput1(Input1);
xor_op.ConnectInput2(Input2);
//and operation for the carry output
and_op.ConnectInput1(Input1);
and_op.ConnectInput2(Input2);
//connecting outputs
Output.ConnectInput(xor_op.Output);
CarryOutput.ConnectInput(and_op.Output);
}
public MultiBitAndGate(int iInputCount)
: base(iInputCount)
{
m_AndGates = new AndGate[iInputCount - 1];
for (int i = 0; i < m_AndGates.Length; i++)
{
m_AndGates[i] = new AndGate();
}
m_AndGates[0].ConnectInput1(m_wsInput[0]);
m_AndGates[0].ConnectInput2(m_wsInput[1]);
for (int i = 1; i < (iInputCount - 1); i++)
{
m_AndGates[i].ConnectInput1(m_AndGates[i - 1].Output);
m_AndGates[i].ConnectInput2(m_wsInput[i + 1]);
}
Output = m_AndGates[iInputCount - 2].Output;
}
public MultiBitAndGate(int iInputCount)
: base(iInputCount)
{
and = new AndGate();
and.ConnectInput1(m_wsInput[0]);
and.ConnectInput2(m_wsInput[1]);
Wire temp = and.Output;
for (int i = 2; i < m_wsInput.Size; i++)
{
and = new AndGate();
and.ConnectInput1(temp);
and.ConnectInput2(m_wsInput[i]);
temp = and.Output;
}
Output = temp;
}
//your code here
public Demux()
{
Input = new Wire();
var mGAnd1 = new AndGate();
var mGAnd2 = new AndGate();
var mGNot1 = new NotGate();
Control = new Wire();
mGNot1.ConnectInput(Control);
mGAnd2.ConnectInput1(Input);
mGAnd2.ConnectInput2(Control);
mGAnd1.ConnectInput1(Input);
mGAnd1.ConnectInput2(mGNot1.Output);
Output1 = mGAnd1.Output;
Output2 = mGAnd2.Output;
}
public MuxGate()
{
var mGAnd1 = new AndGate();
var mGAnd2 = new AndGate();
var mGNot1 = new NotGate();
var mGOr = new OrGate();
ControlInput = new Wire();
mGNot1.ConnectInput(ControlInput);
mGAnd2.ConnectInput1(Input2);
mGAnd2.ConnectInput2(ControlInput);
mGAnd1.ConnectInput1(Input1);
mGAnd1.ConnectInput2(mGNot1.Output);
mGOr.ConnectInput1(mGAnd1.Output);
mGOr.ConnectInput2(mGAnd2.Output);
Output = mGOr.Output;
}
