//------------------------------------------------------------------------------
internal int PolySort(OutRec or1, OutRec or2)
{
if (or1 == or2) return 0;
else if (or1.pts == null || or2.pts == null)
{
if ((or1.pts == null) != (or2.pts == null))
{
if (or1.pts != null) return -1; else return 1;
}
else return 0;
}
int i1, i2;
if (or1.isHole)
i1 = or1.FirstLeft.idx; else
i1 = or1.idx;
if (or2.isHole)
i2 = or2.FirstLeft.idx; else
i2 = or2.idx;
int result = i1 - i2;
if (result == 0 && (or1.isHole != or2.isHole))
{
if (or1.isHole) return 1;
else return -1;
}
return result;
}
//----------------------------------------------------------------------
private void CheckHoleLinkages2(OutRec outRec1, OutRec outRec2)
{
//if a hole is owned by outRec2 then make it owned by outRec1 ...
for (int i = 0; i < m_PolyOuts.Count; ++i)
if (m_PolyOuts[i].isHole && m_PolyOuts[i].bottomPt != null &&
m_PolyOuts[i].FirstLeft == outRec2)
m_PolyOuts[i].FirstLeft = outRec1;
}
//------------------------------------------------------------------------------
private bool Orientation(OutRec outRec, bool UseFull64BitRange)
{
OutPt opBottom = outRec.pts, op = outRec.pts.next;
while (op != outRec.pts)
{
if (op.pt.Y >= opBottom.pt.Y)
{
if (op.pt.Y > opBottom.pt.Y || op.pt.X < opBottom.pt.X)
opBottom = op;
}
op = op.next;
}
IntPoint vec1 = new IntPoint(op.pt.X - op.prev.pt.X, op.pt.Y - op.prev.pt.Y);
IntPoint vec2 = new IntPoint(op.next.pt.X - op.pt.X, op.next.pt.Y - op.pt.Y);
if (UseFull64BitRange)
{
Int128 cross = Int128.Int128Mul(vec1.X, vec2.Y) - Int128.Int128Mul(vec2.X, vec1.Y);
return !cross.IsNegative();
}
else
{
return (vec1.X * vec2.Y - vec2.X * vec1.Y) > 0;
}
}
//------------------------------------------------------------------------------
internal OutRec FindAppendLinkEnd(OutRec outRec)
{
while (outRec.AppendLink != null) outRec = outRec.AppendLink;
return outRec;
}
//----------------------------------------------------------------------
private void FixupFirstLefts2(OutRec OldOutRec, OutRec NewOutRec)
{
foreach (OutRec outRec in m_PolyOuts)
if (outRec.FirstLeft == OldOutRec) outRec.FirstLeft = NewOutRec;
}
//------------------------------------------------------------------------------
private void FixupOutPolygon(OutRec outRec)
{
//FixupOutPolygon() - removes duplicate points and simplifies consecutive
//parallel edges by removing the middle vertex.
OutPt lastOK = null;
outRec.pts = outRec.bottomPt;
OutPt pp = outRec.bottomPt;
for (;;)
{
if (pp.prev == pp || pp.prev == pp.next)
{
DisposeOutPts(pp);
outRec.pts = null;
outRec.bottomPt = null;
return;
}
//test for duplicate points and for same slope (cross-product) ...
if (PointsEqual(pp.pt, pp.next.pt) ||
SlopesEqual(pp.prev.pt, pp.pt, pp.next.pt, m_UseFullRange))
{
lastOK = null;
OutPt tmp = pp;
if (pp == outRec.bottomPt)
{
if (tmp.prev.pt.Y > tmp.next.pt.Y)
outRec.bottomPt = tmp.prev; else
outRec.bottomPt = tmp.next;
outRec.pts = outRec.bottomPt;
outRec.bottomPt.idx = outRec.idx;
}
pp.prev.next = pp.next;
pp.next.prev = pp.prev;
pp = pp.prev;
tmp = null;
}
else if (pp == lastOK) break;
else
{
if (lastOK == null) lastOK = pp;
pp = pp.next;
}
}
}
//------------------------------------------------------------------------------
private OutRec CreateOutRec()
{
OutRec result = new OutRec();
result.Idx = Unassigned;
result.IsHole = false;
result.IsOpen = false;
result.FirstLeft = null;
result.Pts = null;
result.BottomPt = null;
result.PolyNode = null;
m_PolyOuts.Add(result);
result.Idx = m_PolyOuts.Count - 1;
return result;
}
//------------------------------------------------------------------------------
bool Param1RightOfParam2(OutRec outRec1, OutRec outRec2)
{
do
{
outRec1 = outRec1.FirstLeft;
if (outRec1 == outRec2) return true;
} while (outRec1 != null);
return false;
}
//------------------------------------------------------------------------------
private OutRec CreateOutRec()
{
OutRec result = new OutRec();
result.idx = -1;
result.isHole = false;
result.FirstLeft = null;
result.AppendLink = null;
result.pts = null;
result.bottomPt = null;
result.bottomFlag = null;
result.sides = EdgeSide.esNeither;
return result;
}
//------------------------------------------------------------------------------
void DisposeBottomPt(OutRec outRec)
{
OutPt next = outRec.bottomPt.next;
OutPt prev = outRec.bottomPt.prev;
if (outRec.pts == outRec.bottomPt) outRec.pts = next;
outRec.bottomPt = null;
next.prev = prev;
prev.next = next;
outRec.bottomPt = next;
FixupOutPolygon(outRec);
}
//----------------------------------------------------------------------
private static OutRec ParseFirstLeft(OutRec FirstLeft)
{
while (FirstLeft != null && FirstLeft.Pts == null)
FirstLeft = FirstLeft.FirstLeft;
return FirstLeft;
}
//------------------------------------------------------------------------------
internal double Area(OutRec outRec)
{
return Area(outRec.Pts);
}
//------------------------------------------------------------------------------
private void SetHoleState(TEdge e, OutRec outRec)
{
TEdge e2 = e.PrevInAEL;
TEdge eTmp = null;
while (e2 != null)
{
if (e2.OutIdx >= 0 && e2.WindDelta != 0)
{
if (eTmp == null)
eTmp = e2;
else if (eTmp.OutIdx == e2.OutIdx)
eTmp = null; //paired
}
e2 = e2.PrevInAEL;
}
if (eTmp == null)
{
outRec.FirstLeft = null;
outRec.IsHole = false;
}
else
{
outRec.FirstLeft = m_PolyOuts[eTmp.OutIdx];
outRec.IsHole = !outRec.FirstLeft.IsHole;
}
}
//------------------------------------------------------------------------------
private bool JoinPoints(Join j, OutRec outRec1, OutRec outRec2)
{
OutPt op1 = j.OutPt1, op1b;
OutPt op2 = j.OutPt2, op2b;
//There are 3 kinds of joins for output polygons ...
//1. Horizontal joins where Join.OutPt1 & Join.OutPt2 are vertices anywhere
//along (horizontal) collinear edges (& Join.OffPt is on the same horizontal).
//2. Non-horizontal joins where Join.OutPt1 & Join.OutPt2 are at the same
//location at the Bottom of the overlapping segment (& Join.OffPt is above).
//3. StrictlySimple joins where edges touch but are not collinear and where
//Join.OutPt1, Join.OutPt2 & Join.OffPt all share the same point.
bool isHorizontal = (j.OutPt1.Pt.Y == j.OffPt.Y);
if (isHorizontal && (j.OffPt == j.OutPt1.Pt) && (j.OffPt == j.OutPt2.Pt))
{
//Strictly Simple join ...
if (outRec1 != outRec2) return false;
op1b = j.OutPt1.Next;
while (op1b != op1 && (op1b.Pt == j.OffPt))
op1b = op1b.Next;
bool reverse1 = (op1b.Pt.Y > j.OffPt.Y);
op2b = j.OutPt2.Next;
while (op2b != op2 && (op2b.Pt == j.OffPt))
op2b = op2b.Next;
bool reverse2 = (op2b.Pt.Y > j.OffPt.Y);
if (reverse1 == reverse2) return false;
if (reverse1)
{
op1b = DupOutPt(op1, false);
op2b = DupOutPt(op2, true);
op1.Prev = op2;
op2.Next = op1;
op1b.Next = op2b;
op2b.Prev = op1b;
j.OutPt1 = op1;
j.OutPt2 = op1b;
return true;
}
else
{
op1b = DupOutPt(op1, true);
op2b = DupOutPt(op2, false);
op1.Next = op2;
op2.Prev = op1;
op1b.Prev = op2b;
op2b.Next = op1b;
j.OutPt1 = op1;
j.OutPt2 = op1b;
return true;
}
}
else if (isHorizontal)
{
//treat horizontal joins differently to non-horizontal joins since with
//them we're not yet sure where the overlapping is. OutPt1.Pt & OutPt2.Pt
//may be anywhere along the horizontal edge.
op1b = op1;
while (op1.Prev.Pt.Y == op1.Pt.Y && op1.Prev != op1b && op1.Prev != op2)
op1 = op1.Prev;
while (op1b.Next.Pt.Y == op1b.Pt.Y && op1b.Next != op1 && op1b.Next != op2)
op1b = op1b.Next;
if (op1b.Next == op1 || op1b.Next == op2) return false; //a flat 'polygon'
op2b = op2;
while (op2.Prev.Pt.Y == op2.Pt.Y && op2.Prev != op2b && op2.Prev != op1b)
op2 = op2.Prev;
while (op2b.Next.Pt.Y == op2b.Pt.Y && op2b.Next != op2 && op2b.Next != op1)
op2b = op2b.Next;
if (op2b.Next == op2 || op2b.Next == op1) return false; //a flat 'polygon'
int Left, Right;
//Op1 -. Op1b & Op2 -. Op2b are the extremites of the horizontal edges
if (!GetOverlap(op1.Pt.X, op1b.Pt.X, op2.Pt.X, op2b.Pt.X, out Left, out Right))
return false;
//DiscardLeftSide: when overlapping edges are joined, a spike will created
//which needs to be cleaned up. However, we don't want Op1 or Op2 caught up
//on the discard Side as either may still be needed for other joins ...
IntPoint Pt;
bool DiscardLeftSide;
if (op1.Pt.X >= Left && op1.Pt.X <= Right)
{
Pt = op1.Pt; DiscardLeftSide = (op1.Pt.X > op1b.Pt.X);
}
else if (op2.Pt.X >= Left && op2.Pt.X <= Right)
{
Pt = op2.Pt; DiscardLeftSide = (op2.Pt.X > op2b.Pt.X);
}
else if (op1b.Pt.X >= Left && op1b.Pt.X <= Right)
{
Pt = op1b.Pt; DiscardLeftSide = op1b.Pt.X > op1.Pt.X;
}
else
{
Pt = op2b.Pt; DiscardLeftSide = (op2b.Pt.X > op2.Pt.X);
}
j.OutPt1 = op1;
j.OutPt2 = op2;
return JoinHorz(op1, op1b, op2, op2b, Pt, DiscardLeftSide);
}
else
{
//nb: For non-horizontal joins ...
// 1. Jr.OutPt1.Pt.Y == Jr.OutPt2.Pt.Y
// 2. Jr.OutPt1.Pt > Jr.OffPt.Y
//make sure the polygons are correctly oriented ...
op1b = op1.Next;
while ((op1b.Pt == op1.Pt) && (op1b != op1)) op1b = op1b.Next;
bool Reverse1 = ((op1b.Pt.Y > op1.Pt.Y) ||
!SlopesEqual(op1.Pt, op1b.Pt, j.OffPt, m_UseFullRange));
if (Reverse1)
{
op1b = op1.Prev;
while ((op1b.Pt == op1.Pt) && (op1b != op1)) op1b = op1b.Prev;
if ((op1b.Pt.Y > op1.Pt.Y) ||
!SlopesEqual(op1.Pt, op1b.Pt, j.OffPt, m_UseFullRange)) return false;
};
op2b = op2.Next;
while ((op2b.Pt == op2.Pt) && (op2b != op2)) op2b = op2b.Next;
bool Reverse2 = ((op2b.Pt.Y > op2.Pt.Y) ||
!SlopesEqual(op2.Pt, op2b.Pt, j.OffPt, m_UseFullRange));
if (Reverse2)
{
op2b = op2.Prev;
while ((op2b.Pt == op2.Pt) && (op2b != op2)) op2b = op2b.Prev;
if ((op2b.Pt.Y > op2.Pt.Y) ||
!SlopesEqual(op2.Pt, op2b.Pt, j.OffPt, m_UseFullRange)) return false;
}
if ((op1b == op1) || (op2b == op2) || (op1b == op2b) ||
((outRec1 == outRec2) && (Reverse1 == Reverse2))) return false;
if (Reverse1)
{
op1b = DupOutPt(op1, false);
op2b = DupOutPt(op2, true);
op1.Prev = op2;
op2.Next = op1;
op1b.Next = op2b;
op2b.Prev = op1b;
j.OutPt1 = op1;
j.OutPt2 = op1b;
return true;
}
else
{
op1b = DupOutPt(op1, true);
op2b = DupOutPt(op2, false);
op1.Next = op2;
op2.Prev = op1;
op1b.Prev = op2b;
op2b.Next = op1b;
j.OutPt1 = op1;
j.OutPt2 = op1b;
return true;
}
}
}
//------------------------------------------------------------------------------
private OutRec GetLowermostRec(OutRec outRec1, OutRec outRec2)
{
//work out which polygon fragment has the correct hole state ...
if (outRec1.BottomPt == null)
outRec1.BottomPt = GetBottomPt(outRec1.Pts);
if (outRec2.BottomPt == null)
outRec2.BottomPt = GetBottomPt(outRec2.Pts);
OutPt bPt1 = outRec1.BottomPt;
OutPt bPt2 = outRec2.BottomPt;
if (bPt1.Pt.Y > bPt2.Pt.Y) return outRec1;
else if (bPt1.Pt.Y < bPt2.Pt.Y) return outRec2;
else if (bPt1.Pt.X < bPt2.Pt.X) return outRec1;
else if (bPt1.Pt.X > bPt2.Pt.X) return outRec2;
else if (bPt1.Next == bPt1) return outRec2;
else if (bPt2.Next == bPt2) return outRec1;
else if (FirstIsBottomPt(bPt1, bPt2)) return outRec1;
else return outRec2;
}
//------------------------------------------------------------------------------
private OutRec GetLowermostRec(OutRec outRec1, OutRec outRec2)
{
//work out which polygon fragment has the correct hole state ...
OutPt bPt1 = outRec1.bottomPt;
OutPt bPt2 = outRec2.bottomPt;
if (bPt1.pt.Y > bPt2.pt.Y) return outRec1;
else if (bPt1.pt.Y < bPt2.pt.Y) return outRec2;
else if (bPt1.pt.X < bPt2.pt.X) return outRec1;
else if (bPt1.pt.X > bPt2.pt.X) return outRec2;
else if (bPt1.next == bPt1) return outRec2;
else if (bPt2.next == bPt2) return outRec1;
else if (FirstIsBottomPt(bPt1, bPt2)) return outRec1;
else return outRec2;
}
//------------------------------------------------------------------------------
private void FixupOutPolygon(OutRec outRec)
{
//FixupOutPolygon() - removes duplicate points and simplifies consecutive
//parallel edges by removing the middle vertex.
OutPt lastOK = null;
outRec.BottomPt = null;
OutPt pp = outRec.Pts;
for (;;)
{
if (pp.Prev == pp || pp.Prev == pp.Next)
{
DisposeOutPts(pp);
outRec.Pts = null;
return;
}
//test for duplicate points and collinear edges ...
if ((pp.Pt == pp.Next.Pt) || (pp.Pt == pp.Prev.Pt) ||
(SlopesEqual(pp.Prev.Pt, pp.Pt, pp.Next.Pt, m_UseFullRange) &&
(!PreserveCollinear || !Pt2IsBetweenPt1AndPt3(pp.Prev.Pt, pp.Pt, pp.Next.Pt))))
{
lastOK = null;
OutPt tmp = pp;
pp.Prev.Next = pp.Next;
pp.Next.Prev = pp.Prev;
pp = pp.Prev;
tmp = null;
}
else if (pp == lastOK) break;
else
{
if (lastOK == null) lastOK = pp;
pp = pp.Next;
}
}
outRec.Pts = pp;
}
//----------------------------------------------------------------------
private void FixupFirstLefts1(OutRec OldOutRec, OutRec NewOutRec)
{
for (int i = 0; i < m_PolyOuts.Count; i++)
{
OutRec outRec = m_PolyOuts[i];
if (outRec.pts != null && outRec.FirstLeft == OldOutRec)
{
if (Poly2ContainsPoly1(outRec.pts, NewOutRec.pts, m_UseFullRange))
outRec.FirstLeft = NewOutRec;
}
}
}
//------------------------------------------------------------------------------
private void UpdateOutPtIdxs(OutRec outrec)
{
OutPt op = outrec.Pts;
do
{
op.Idx = outrec.Idx;
op = op.Prev;
}
while(op != outrec.Pts);
}
//------------------------------------------------------------------------------
double Area(OutRec outRec, bool UseFull64BitRange)
{
OutPt op = outRec.pts;
if (op == null) return 0;
if (UseFull64BitRange)
{
Int128 a = new Int128(0);
do
{
a += Int128.Int128Mul(op.pt.X + op.prev.pt.X, op.prev.pt.Y - op.pt.Y);
op = op.next;
} while (op != outRec.pts);
return a.ToDouble() / 2;
}
else
{
double a = 0;
do {
a = a + (op.pt.X + op.prev.pt.X) * (op.prev.pt.Y - op.pt.Y);
op = op.next;
} while (op != outRec.pts);
return a/2;
}
}
//------------------------------------------------------------------------------
double Area(OutRec outRec)
{
OutPt op = outRec.Pts;
if (op == null) return 0;
double a = 0;
do {
a = a + (double)(op.Pt.X + op.Prev.Pt.X) * (double)(op.Prev.Pt.Y - op.Pt.Y);
op = op.Next;
} while (op != outRec.Pts);
return a/2;
}
//---------------------------------------------------------------------------
private OutRec GetLowermostRec(OutRec outRec1, OutRec outRec2)
{
//work out which polygon fragment has the correct hole state ...
OutPt bPt1 = outRec1.bottomPt;
OutPt bPt2 = outRec2.bottomPt;
if (bPt1.pt.Y > bPt2.pt.Y) return outRec1;
else if (bPt1.pt.Y < bPt2.pt.Y) return outRec2;
else if (bPt1.pt.X < bPt2.pt.X) return outRec1;
else if (bPt1.pt.X > bPt2.pt.X) return outRec2;
else if (outRec1.bottomE2 == null) return outRec2;
else if (outRec2.bottomE2 == null) return outRec1;
else
{
Int64 y1 = Math.Max(outRec1.bottomE1.ybot, outRec1.bottomE2.ybot);
Int64 y2 = Math.Max(outRec2.bottomE1.ybot, outRec2.bottomE2.ybot);
if (y2 == y1 || (y1 > bPt1.pt.Y && y2 > bPt1.pt.Y))
{
double dx1 = Math.Max(outRec1.bottomE1.dx, outRec1.bottomE2.dx);
double dx2 = Math.Max(outRec2.bottomE1.dx, outRec2.bottomE2.dx);
if (dx2 > dx1) return outRec2; else return outRec1;
}
else if (y2 > y1) return outRec2;
else return outRec1;
}
}
//------------------------------------------------------------------------------
private bool Orientation(OutRec outRec, bool UseFull64BitRange)
{
//first make sure bottomPt is correctly assigned ...
OutPt opBottom = outRec.pts, op = outRec.pts.next;
while (op != outRec.pts)
{
if (op.pt.Y >= opBottom.pt.Y)
{
if (op.pt.Y > opBottom.pt.Y || op.pt.X < opBottom.pt.X)
opBottom = op;
}
op = op.next;
}
outRec.bottomPt = opBottom;
//find vertices either side of bottomPt (skipping duplicate points) ....
OutPt opPrev = op.prev;
OutPt opNext = op.next;
while (op != opPrev && PointsEqual(op.pt, opPrev.pt))
opPrev = opPrev.prev;
while (op != opNext && PointsEqual(op.pt, opNext.pt))
opNext = opNext.next;
IntPoint vec1 = new IntPoint(op.pt.X - opPrev.pt.X, op.pt.Y - opPrev.pt.Y);
IntPoint vec2 = new IntPoint(opNext.pt.X - op.pt.X, opNext.pt.Y - op.pt.Y);
if (UseFull64BitRange)
{
Int128 cross = Int128.Int128Mul(vec1.X, vec2.Y) - Int128.Int128Mul(vec2.X, vec1.Y);
return !cross.IsNegative();
}
else
{
return (vec1.X * vec2.Y - vec2.X * vec1.Y) > 0;
}
}
//------------------------------------------------------------------------------
private void SetHoleState(TEdge e, OutRec outRec)
{
bool isHole = false;
TEdge e2 = e.prevInAEL;
while (e2 != null)
{
if (e2.outIdx >= 0)
{
isHole = !isHole;
if (outRec.FirstLeft == null)
outRec.FirstLeft = m_PolyOuts[e2.outIdx];
}
e2 = e2.prevInAEL;
}
if (isHole) outRec.isHole = true;
}
//------------------------------------------------------------------------------
private OutRec CreateOutRec()
{
OutRec result = new OutRec();
result.idx = -1;
result.isHole = false;
result.FirstLeft = null;
result.pts = null;
result.bottomPt = null;
result.polyNode = null;
m_PolyOuts.Add(result);
result.idx = m_PolyOuts.Count - 1;
return result;
}
//------------------------------------------------------------------------------
internal void FixHoleLinkage(OutRec outRec)
{
OutRec tmp;
if (outRec.bottomPt != null)
tmp = m_PolyOuts[outRec.bottomPt.idx].FirstLeft;
else
tmp = outRec.FirstLeft;
if (outRec == tmp) throw new ClipperException("HoleLinkage error");
if (tmp != null)
{
if (tmp.AppendLink != null) tmp = FindAppendLinkEnd(tmp);
if (tmp == outRec) tmp = null;
else if (tmp.isHole)
{
FixHoleLinkage(tmp);
tmp = tmp.FirstLeft;
}
}
outRec.FirstLeft = tmp;
if (tmp == null) outRec.isHole = false;
outRec.AppendLink = null;
}
//------------------------------------------------------------------------------
private void UpdateOutPtIdxs(OutRec outrec)
{
OutPt op = outrec.pts;
do
{
op.idx = outrec.idx;
op = op.prev;
}
while (op != outrec.pts);
}
//------------------------------------------------------------------------------
private void CheckHoleLinkages1(OutRec outRec1, OutRec outRec2)
{
//when a polygon is split into 2 polygons, make sure any holes the original
//polygon contained link to the correct polygon ...
for (int i = 0; i < m_PolyOuts.Count; ++i)
{
if (m_PolyOuts[i].isHole && m_PolyOuts[i].bottomPt != null &&
m_PolyOuts[i].FirstLeft == outRec1 &&
!PointInPolygon(m_PolyOuts[i].bottomPt.pt,
outRec1.pts, m_UseFullRange))
m_PolyOuts[i].FirstLeft = outRec2;
}
}
//------------------------------------------------------------------------------
internal void FixHoleLinkage(OutRec outRec)
{
//skip if an outermost polygon or
//already already points to the correct FirstLeft ...
if (outRec.FirstLeft == null ||
(outRec.isHole != outRec.FirstLeft.isHole &&
outRec.FirstLeft.pts != null)) return;
OutRec orfl = outRec.FirstLeft;
while (orfl != null && ((orfl.isHole == outRec.isHole) || orfl.pts == null))
orfl = orfl.FirstLeft;
outRec.FirstLeft = orfl;
}
//------------------------------------------------------------------------------
private OutRec CreateOutRec()
{
OutRec result = new OutRec();
result.idx = -1;
result.isHole = false;
result.FirstLeft = null;
result.AppendLink = null;
result.pts = null;
result.bottomPt = null;
return result;
}
//------------------------------------------------------------------------------
protected override void AddLocalMinPoly(Active e1, Active e2, Point pt)
{
base.AddLocalMinPoly(e1, e2, pt);
OutRec locMinOr = e1.OutRec;
(locMinOr.Pts as OutPtTri).outrec = locMinOr;
UpdateHelper(locMinOr, locMinOr.Pts);
if (locMinOr.Flag == OutrecFlag.Outer)
{
return;
}
//do 'keyholing' ...
Active e = GetRightAdjacentHotEdge(e1);
if (e == e2)
{
e = GetRightAdjacentHotEdge(e2);
}
if (e == null)
{
e = GetLeftAdjacentHotEdge(e1);
}
OutPt botLft = (e.OutRec as OutRecTri).leftOutpt;
OutPt botRt = GetOutPt(e);
if (botLft == null || botRt.Pt.Y < botLft.Pt.Y)
{
botLft = botRt;
}
botRt = InsertPt(botLft.Pt, botLft.Prev);
OutRec botOr = (botLft as OutPtTri).outrec;
if (botOr.Pts == null)
{
botOr = botOr.Owner;
}
OutPt startOp = botOr.Pts;
OutPt endOp = startOp.Next;
locMinOr.Flag = OutrecFlag.Outer;
locMinOr.Owner = null;
OutPt locMinLft = locMinOr.Pts;
OutPt locMinRt = InsertPt(locMinLft.Pt, locMinLft);
//locMinOr will contain the polygon to the right of the join (ascending),
//and botOr will contain the polygon to the left of the join (descending).
//tail . botRt . locMinRt : locMinRt is joined by botRt tail
locMinRt.Next = endOp;
endOp.Prev = locMinRt;
botRt.Next = locMinRt;
locMinRt.Prev = botRt;
locMinOr.Pts = locMinRt;
//locMinLft . botLft . head : locMinLft joins behind botLft (left)
startOp.Next = locMinLft;
locMinLft.Prev = startOp;
botLft.Prev = locMinLft;
locMinLft.Next = botLft;
(locMinLft as OutPtTri).outrec = botOr; //ie abreviated update()
Update(locMinRt, locMinOr); //updates the outrec for each op
//exchange endE's ...
e = botOr.EndE;
botOr.EndE = locMinOr.EndE;
locMinOr.EndE = e;
botOr.EndE.OutRec = botOr;
locMinOr.EndE.OutRec = locMinOr;
//update helper info ...
UpdateHelper(locMinOr, locMinRt);
UpdateHelper(botOr, botOr.Pts);
Triangulate(locMinOr);
Triangulate(botOr);
}
