public override void Run(Canguro.Controller.CommandServices services)
{
List <Item> selecton = services.GetSelection();
List <Joint> joints = new List <Joint>();
List <LineElement> lines = new List <LineElement>();
foreach (Item item in selecton)
{
if (item is Joint)
{
joints.Add((Joint)item);
}
else if (item is LineElement)
{
lines.Add((LineElement)item);
}
}
JoinCmd.Intersect(services.Model, joints, lines);
}
/// <summary>
/// Executes the command.
/// Adds a set of Line Elements. Opens a properties window and asks the user for two points or Joints for each one.
/// </summary>
/// <param name="services">CommandServices object to interact with the system</param>
public override void Run(Canguro.Controller.CommandServices services)
{
LineElement line;
Joint joint1, joint2;
LineProps props = new StraightFrameProps();
List <LineElement> newLines = new List <LineElement>();
List <AreaElement> newAreas = new List <AreaElement>();
services.GetProperties(Culture.Get("addLineProps"), props);
try
{
while ((joint1 = services.GetJoint(newLines)) != null)
{
services.TrackingService = LineTrackingService.Instance;
services.TrackingService.SetPoint(joint1.Position);
while ((joint2 = services.GetJoint(newLines)) == joint1)
{
;
}
if (joint2 == null)
{
services.Model.JointList.Remove(joint1);
break;
}
services.TrackingService = null;
services.Model.LineList.Add(line = new LineElement(props, joint1, joint2));
newLines.Add(line);
// Para que se refleje el cambio inmediatamente
services.Model.ChangeModel();
}
}
catch (Canguro.Controller.CancelCommandException) { }
JoinCmd.Join(services.Model, new List <Joint>(), newLines, newAreas);
}
//public override void Run(Canguro.Controller.CommandServices services)
//{
// objectCount = 0;
// if (Clipboard.ContainsData("Canguro"))
// {
// Stream stream = (Stream)Clipboard.GetData("Canguro");
// Magnet magnet = services.GetPoint(Culture.Get("pasteCmdTitle"));
// BinaryFormatter bformatter = new BinaryFormatter();
// Microsoft.DirectX.Vector3 pivot = (Microsoft.DirectX.Vector3)bformatter.Deserialize(stream);
// Microsoft.DirectX.Vector3 v = magnet.SnapPosition - pivot;
// List<Joint> newJoints = new List<Joint>();
// List<LineElement> newLines = new List<LineElement>();
// ItemList<Joint> jList = services.Model.JointList;
// ItemList<LineElement> lList = services.Model.LineList;
// Dictionary<uint, Joint> jSelection = new Dictionary<uint, Joint>();
// Joint nJoint;
// LineElement nLine;
// objectCount = (int) bformatter.Deserialize(stream);
// for (int i = 0; i < objectCount; i++)
// {
// Element elem = (Element)bformatter.Deserialize(stream);
// if (elem is Joint)
// {
// Joint j = (Joint)elem;
// jList.Add(nJoint = new Joint(j.X + v.X, j.Y + v.Y, j.Z + v.Z));
// nJoint.Masses = j.Masses;
// nJoint.DoF = j.DoF;
// jSelection.Add(j.Id, nJoint);
// newJoints.Add(nJoint);
// CopyLoads(services.Model, j, nJoint);
// }
// if (elem is LineElement)
// {
// LineElement l = (LineElement)elem;
// lList.Add(nLine = new LineElement(l.Properties));
// nLine.I = jSelection[l.I.Id];
// nLine.J = jSelection[l.J.Id];
// nLine.Angle = l.Angle;
// newLines.Add(nLine);
// CopyLoads(services.Model, l, nLine);
// }
// JoinCmd.Join(services.Model, newJoints, newLines);
// }
// }
//}
/// <summary>
/// Executes the command.
/// Pastes the Items in the Clpboard under the key Canguro, in the current Model.
/// </summary>
/// <param name="services">CommandServices object to interact with the system</param>
public override void Run(Canguro.Controller.CommandServices services)
{
objectCount = 0;
if (Clipboard.ContainsData("Canguro"))
{
object[] data = (object[])Clipboard.GetData("Canguro");
Dictionary <uint, Joint> joints = (Dictionary <uint, Joint>)data[0];
Dictionary <uint, Joint> jSelection = new Dictionary <uint, Joint>();
IList <LineElement> lines = (IList <LineElement>)data[1];
IList <AreaElement> areas = (IList <AreaElement>)data[2];
Microsoft.DirectX.Vector3 pivot = (Microsoft.DirectX.Vector3)data[3];
ItemList <Joint> jList = services.Model.JointList;
ItemList <LineElement> lList = services.Model.LineList;
ItemList <AreaElement> aList = services.Model.AreaList;
Joint nJoint;
LineElement nLine;
AreaElement nArea;
Magnet magnet = services.GetPoint(Culture.Get("pasteCmdTitle"));
if (magnet == null)
{
objectCount = 0;
}
else
{
objectCount = joints.Count + lines.Count;
Microsoft.DirectX.Vector3 v = magnet.SnapPosition - pivot;
List <Joint> newJoints = new List <Joint>();
List <LineElement> newLines = new List <LineElement>();
List <AreaElement> newAreas = new List <AreaElement>();
Dictionary <string, Layer> layers = new Dictionary <string, Layer>();
foreach (Layer l in services.Model.Layers)
{
if (l != null)
{
layers.Add(l.Name, l);
}
}
foreach (uint jid in joints.Keys)
{
Joint j = (joints[jid] == null) ? jList[jid] : joints[jid];
jList.Add(nJoint = new Joint(j.X + v.X, j.Y + v.Y, j.Z + v.Z));
nJoint.Masses = j.Masses;
if (!layers.ContainsKey(j.Layer.Name))
{
Layer lay = new Layer(j.Layer.Name);
services.Model.Layers.Add(lay);
layers.Add(lay.Name, lay);
}
nJoint.Layer = layers[j.Layer.Name];
nJoint.DoF = j.DoF;
jSelection.Add(jid, nJoint);
newJoints.Add(nJoint);
CopyLoads(services.Model, j, nJoint);
}
foreach (LineElement l in lines)
{
if (!layers.ContainsKey(l.Layer.Name))
{
Layer lay = new Layer(l.Layer.Name);
services.Model.Layers.Add(lay);
layers.Add(lay.Name, lay);
}
lList.Add(nLine = new LineElement(l, jSelection[l.I.Id], jSelection[l.J.Id]));
nLine.Layer = layers[l.Layer.Name];
newLines.Add(nLine);
CopyLoads(services.Model, l, nLine);
}
foreach (AreaElement a in areas)
{
if (!layers.ContainsKey(a.Layer.Name))
{
Layer lay = new Layer(a.Layer.Name);
services.Model.Layers.Add(lay);
layers.Add(lay.Name, lay);
}
aList.Add(nArea = new AreaElement(a, jSelection[a.J1.Id], jSelection[a.J2.Id], jSelection[a.J3.Id], (a.J4 != null) ? jSelection[a.J4.Id] : null));
if (a.J4 != null)
{
nArea.J4 = jSelection[a.J4.Id];
}
nArea.Layer = layers[a.Layer.Name];
newAreas.Add(nArea);
CopyLoads(services.Model, a, nArea);
}
JoinCmd.Join(services.Model, newJoints, newLines, newAreas);
}
}
}
/// <summary>
/// Executes the command.
/// Opens the AnalysisOptionsDialog, creates the export file, sends it to the Server and waits for it to have results.
/// </summary>
/// <param name="services">CommandServices object to interact with the system</param>
public override void Run(Canguro.Controller.CommandServices services)
{
gettingResults = false;
System.Windows.Forms.DialogResult result = services.ShowDialog(new Canguro.Commands.Model.AnalysisOptionsDialog(services));
string message = "";
if (result == System.Windows.Forms.DialogResult.Cancel)
{
services.Model.Undo.Rollback();
}
else if (result == System.Windows.Forms.DialogResult.OK)
{
try
{
System.Windows.Forms.Cursor cursor = System.Windows.Forms.Cursor.Current;
bool isConnected;
bool canAnalyze = false;
JoinCmd.RepairJoints(services.Model);
new Canguro.Commands.Model.UnselectCmd().Run(services);
if (!(canAnalyze = AnalysisUtils.CanAnalyze(services.Model, ref message, out isConnected)))
{
if (!isConnected)
{
if (System.Windows.Forms.MessageBox.Show(message, Culture.Get("error"),
System.Windows.Forms.MessageBoxButtons.YesNo, System.Windows.Forms.MessageBoxIcon.Error) ==
System.Windows.Forms.DialogResult.Yes)
{
System.Windows.Forms.Cursor.Current = System.Windows.Forms.Cursors.WaitCursor;
new JoinCmd().Run(services);
canAnalyze = AnalysisUtils.CanAnalyze(services.Model, ref message, out isConnected);
System.Windows.Forms.Cursor.Current = cursor;
}
else
{
return;
}
}
}
if (canAnalyze)
{
System.Windows.Forms.Cursor.Current = System.Windows.Forms.Cursors.WaitCursor;
string modelPath = System.IO.Path.GetTempFileName();
System.Diagnostics.Debug.WriteLine(modelPath);
FixPDelta(services.Model.AbstractCases);
Stream stream = File.Create(modelPath);
new Canguro.Model.Serializer.Serializer(services.Model).Serialize(stream, false);
stream.Close();
System.Windows.Forms.Cursor.Current = cursor;
System.Windows.Forms.Cursor.Current = System.Windows.Forms.Cursors.WaitCursor;
// TODO: ANALYZE STRUCTURE!!!
//analysisID = ws.Analyze(userNameURL, passwordURL, host, serial, file, analysisOptions, modelSize, quotation);
System.Windows.Forms.Cursor.Current = cursor;
services.Model.Results = new Canguro.Model.Results.Results(0);
// TODO: GET RESULTS
services.ReportProgress(5);
}
else // Can't analyze
{
if (!isConnected)
{
message = Culture.Get("structureIsDisconnectedWrn");
}
System.Windows.Forms.MessageBox.Show(message, Culture.Get("error"), System.Windows.Forms.MessageBoxButtons.OK, System.Windows.Forms.MessageBoxIcon.Error);
}
}
catch (Exception)
{
System.Windows.Forms.MessageBox.Show(Culture.Get("ErrorAnalyzing"), Culture.Get("error"), System.Windows.Forms.MessageBoxButtons.OK, System.Windows.Forms.MessageBoxIcon.Error);
}
}
}
/// <summary>
/// Executes the command.
/// Asks for selected Items repetitions and a Vector, and makes the copies.
/// </summary>
/// <param name="services">CommandServices object to interact with the system</param>
public override void Run(Canguro.Controller.CommandServices services)
{
Dictionary <Joint, Joint> joints = new Dictionary <Joint, Joint>();
Dictionary <Joint, Joint> jSelection = new Dictionary <Joint, Joint>();
List <LineElement> lines = new List <LineElement>();
List <LineElement> lSelection = new List <LineElement>();
List <AreaElement> areas = new List <AreaElement>();
List <AreaElement> aSelection = new List <AreaElement>();
ItemList <Joint> jList = services.Model.JointList;
ItemList <LineElement> lList = services.Model.LineList;
ItemList <AreaElement> aList = services.Model.AreaList;
Joint nJoint;
LineElement nLine;
AreaElement nArea;
List <Item> selection = services.GetSelection();
if (selection.Count == 0)
{
return;
}
foreach (Item item in selection)
{
if (item is Joint)
{
jSelection.Add((Joint)item, null);
joints.Add((Joint)item, null);
}
else if (item is LineElement)
{
LineElement l = (LineElement)item;
lSelection.Add(l);
lines.Add(l);
if (!jSelection.ContainsKey(l.I))
{
jSelection.Add(l.I, null);
joints.Add(l.I, null);
}
if (!jSelection.ContainsKey(l.J))
{
jSelection.Add(l.J, null);
joints.Add(l.J, null);
}
}
else if (item is AreaElement)
{
AreaElement a = (AreaElement)item;
aSelection.Add(a);
areas.Add(a);
for (int i = 0; i < ((a.J4 != null) ? 4 : 3); i++)
{
if (!jSelection.ContainsKey(a[i]))
{
jSelection.Add(a[i], null);
joints.Add(a[i], null);
}
}
}
}
Microsoft.DirectX.Vector3 v;
services.GetVector(out v);
uint n;
string str = services.GetString(Culture.Get("getArrayRepetition"));
n = Convert.ToUInt32(str);
List <Joint> newJoints = new List <Joint>();
List <LineElement> newLines = new List <LineElement>();
List <AreaElement> newAreas = new List <AreaElement>();
for (int i = 1; i <= n; i++)
{
foreach (Joint j in joints.Keys)
{
jList.Add(nJoint = new Joint(j.X + i * v.X, j.Y + i * v.Y, j.Z + i * v.Z));
nJoint.Masses = j.Masses;
nJoint.DoF = j.DoF;
jSelection[j] = nJoint;
newJoints.Add(nJoint);
}
foreach (LineElement l in lines)
{
lList.Add(nLine = new LineElement(l, jSelection[l.I], jSelection[l.J]));
newLines.Add(nLine);
}
foreach (AreaElement a in areas)
{
aList.Add(nArea = new AreaElement(a, jSelection[a.J1], jSelection[a.J2], jSelection[a.J3], jSelection[a.J4]));
newAreas.Add(nArea);
}
services.ReportProgress((uint)(100 * i / n));
System.Windows.Forms.Application.DoEvents();
}
JoinCmd.Join(services.Model, newJoints, newLines, newAreas);
}
/// <summary>
/// Executes the command.
/// Copies the selected Items in a series around a given rotation axis.
/// </summary>
/// <param name="services">CommandServices object to interact with the system</param>
public override void Run(Canguro.Controller.CommandServices services)
{
Dictionary <Joint, Joint> joints = new Dictionary <Joint, Joint>();
Dictionary <Joint, Joint> jSelection = new Dictionary <Joint, Joint>();
List <LineElement> lines = new List <LineElement>();
List <LineElement> lSelection = new List <LineElement>();
List <AreaElement> areas = new List <AreaElement>();
List <AreaElement> aSelection = new List <AreaElement>();
ItemList <Joint> jList = services.Model.JointList;
ItemList <LineElement> lList = services.Model.LineList;
ItemList <AreaElement> aList = services.Model.AreaList;
Joint nJoint;
LineElement nLine;
AreaElement nArea;
List <Item> selection = services.GetSelection();
if (selection.Count == 0)
{
return;
}
foreach (Item item in selection)
{
if (item is Joint)
{
jSelection.Add((Joint)item, null);
joints.Add((Joint)item, null);
}
else if (item is LineElement)
{
LineElement l = (LineElement)item;
lSelection.Add(l);
lines.Add(l);
if (!jSelection.ContainsKey(l.I))
{
jSelection.Add(l.I, null);
joints.Add(l.I, null);
}
if (!jSelection.ContainsKey(l.J))
{
jSelection.Add(l.J, null);
joints.Add(l.J, null);
}
}
else if (item is AreaElement)
{
AreaElement a = (AreaElement)item;
aSelection.Add(a);
areas.Add(a);
if (!jSelection.ContainsKey(a.J1))
{
jSelection.Add(a.J1, null);
joints.Add(a.J1, null);
}
if (!jSelection.ContainsKey(a.J2))
{
jSelection.Add(a.J2, null);
joints.Add(a.J2, null);
}
if (!jSelection.ContainsKey(a.J3))
{
jSelection.Add(a.J3, null);
joints.Add(a.J3, null);
}
if (a.J4 != null && !jSelection.ContainsKey(a.J4))
{
jSelection.Add(a.J4, null);
joints.Add(a.J4, null);
}
}
}
Microsoft.DirectX.Vector3 v, v2;
uint n = (uint)services.GetSingle(Culture.Get("getArrayRepetition"));
float dAngle = float.Parse(services.GetString(Culture.Get("getPolarArrayAngle")));
dAngle *= (float)Math.PI / 180.0F;
float angle = 0.0F;
Controller.Snap.Magnet m = services.GetPoint(Culture.Get("getPolarRotationCenter"));
if (m == null)
{
return;
}
v = m.SnapPosition;
services.TrackingService = LineTrackingService.Instance;
services.TrackingService.SetPoint(m.SnapPositionInt);
m = services.GetPoint(Culture.Get("getPolarRotationCenter"));
if (m == null)
{
return;
}
v2 = m.SnapPosition;
if (v2.Equals(v))
{
Canguro.View.GraphicView view = Canguro.View.GraphicViewManager.Instance.ActiveView;
Vector3 v1Tmp = new Vector3(0, 0, 0);
Vector3 v2Tmp = new Vector3(0, 0, 1);
view.Unproject(ref v1Tmp);
view.Unproject(ref v2Tmp);
v2 = v2 + v1Tmp - v2Tmp;
}
services.TrackingService = null;
List <Joint> newJoints = new List <Joint>();
List <LineElement> newLines = new List <LineElement>();
List <AreaElement> newAreas = new List <AreaElement>();
for (int i = 1; i <= n; i++)
{
angle += dAngle;
Matrix trans1 = new Matrix();
trans1.Translate(-v);
Matrix rot = new Matrix();
rot.RotateAxis(v2 - v, angle);
Matrix trans2 = new Matrix();
trans2.Translate(v);
rot = trans1 * rot * trans2;
foreach (Joint j in joints.Keys)
{
Vector3 pos = new Vector3(j.X, j.Y, j.Z);
pos.TransformCoordinate(rot);
jList.Add(nJoint = new Joint(pos.X, pos.Y, pos.Z));
nJoint.Masses = j.Masses;
nJoint.DoF = j.DoF;
jSelection[j] = nJoint;
newJoints.Add(nJoint);
}
foreach (LineElement l in lines)
{
lList.Add(nLine = new LineElement(l, jSelection[l.I], jSelection[l.J]));
newLines.Add(nLine);
}
foreach (AreaElement a in areas)
{
aList.Add(nArea = new AreaElement(a, jSelection[a.J1], jSelection[a.J2], jSelection[a.J3], (a.J4 != null) ? jSelection[a.J4] : null));
newAreas.Add(nArea);
}
}
JoinCmd.Join(services.Model, newJoints, newLines, newAreas);
}
/// <summary>
/// Reads a DXF file and adds all the lines defined in it to the given Model
/// </summary>
/// <param name="path">The path to the DXF file</param>
/// <param name="model">The current Model object</param>
public static void Import(string path, Canguro.Model.Model model)
{
if (path.Length > 0)
{
string[] file = File.ReadAllLines(path);
List <string> search = new List <string>(new string[] { "LINE", "10", "20", "30", "11", "21", "31", "LWPOLYLINE" });
int state = 0;
Joint ji = null;
Joint jj = null;
StraightFrameProps props = new StraightFrameProps();
List <LineElement> newLines = new List <LineElement>();
List <AreaElement> newAreas = new List <AreaElement>();
List <Joint> newJoints = new List <Joint>();
bool addLine = false;
bool polyline = false;
for (int i = 0; i < file.Length; i++)
{
string line = file[i].Trim().ToUpper();
while (!search.Contains(line) && i < file.Length - 1)
{
line = file[++i].Trim().ToUpper();
}
state = search.IndexOf(line);
if (state == 0 || state > 6)
{
addLine = true;
jj = null;
ji = null;
}
if (state == 7)
{
polyline = true;
}
if (!addLine)
{
continue;
}
if (i == file.Length - 1)
{
break;
}
line = file[++i].Trim();
switch (state)
{
case 1:
jj = (polyline) ? ji : jj;
ji = new Joint(Convert.ToSingle(line), 0, 0);
if (polyline && jj != null)
{
AddLine(model, ji, jj, props, newJoints, newLines);
}
break;
case 2:
if (ji != null)
{
ji.Y = Convert.ToSingle(line);
}
break;
case 3:
if (ji != null)
{
ji.Z = Convert.ToSingle(line);
}
break;
case 4:
jj = new Joint(Convert.ToSingle(line), 0, 0);
break;
case 5:
if (addLine && jj != null)
{
jj.Y = Convert.ToSingle(line);
}
AddLine(model, ji, jj, props, newJoints, newLines);
polyline = false;
break;
case 6:
if (jj != null)
{
jj.Z = Convert.ToSingle(line);
}
break;
}
}
JoinCmd.Join(model, newJoints, newLines, newAreas);
}
}
/// <summary>
/// Executes the command.
/// Makes a copy of the selected items with inverted positions with respect to a mirror plane, defined by 3 points.
/// If the points are colinear, the 3rd point is taken to be perpendicular to the view.
/// </summary>
/// <param name="services">CommandServices object to interact with the system</param>
public override void Run(Canguro.Controller.CommandServices services)
{
Dictionary <uint, Joint> joints = new Dictionary <uint, Joint>();
List <LineElement> lines = new List <LineElement>();
List <AreaElement> areas = new List <AreaElement>();
services.GetSelection(joints, lines, areas);
Dictionary <uint, Joint> jSelection = new Dictionary <uint, Joint>();
Microsoft.DirectX.Vector3[] pivots = new Microsoft.DirectX.Vector3[3];
// Get 3 Points
Magnet m = services.GetPoint(Culture.Get("selectPlainPoints"));
pivots[0] = m.SnapPosition;
m = services.GetPoint(Culture.Get("selectPlainPoints"));
pivots[1] = m.SnapPosition;
m = services.GetPoint(Culture.Get("selectPlainPoints"));
pivots[2] = m.SnapPosition;
Vector3 v1 = pivots[0] - pivots[1];
Vector3 v2 = pivots[1] - pivots[2];
if (Vector3.Cross(v1, v2).LengthSq() < 0.0001) // If Colinear, take perpendicular to the active view.
{
Canguro.View.GraphicView view = Canguro.View.GraphicViewManager.Instance.ActiveView;
v1 = new Vector3(0, 0, 0);
v2 = new Vector3(0, 0, 1);
view.Unproject(ref v1);
view.Unproject(ref v2);
pivots[2] = pivots[2] + v1 - v2;
}
ItemList <Joint> jList = services.Model.JointList;
ItemList <LineElement> lList = services.Model.LineList;
ItemList <AreaElement> aList = services.Model.AreaList;
Joint nJoint;
LineElement nLine;
AreaElement nArea;
List <Joint> newJoints = new List <Joint>();
List <LineElement> newLines = new List <LineElement>();
List <AreaElement> newAreas = new List <AreaElement>();
foreach (uint jid in joints.Keys)
{
Joint j = jList[jid];
Vector3 currentPos = new Vector3(j.X, j.Y, j.Z);
Vector3 newPos = Mirror(currentPos, pivots);
jList.Add(nJoint = new Joint(newPos.X, newPos.Y, newPos.Z));
nJoint.Masses = j.Masses;
nJoint.DoF = j.DoF;
jSelection.Add(jid, nJoint);
newJoints.Add(nJoint);
}
foreach (LineElement l in lines)
{
lList.Add(nLine = new LineElement(l, jSelection[l.I.Id], jSelection[l.J.Id]));
newLines.Add(nLine);
}
foreach (AreaElement a in areas)
{
aList.Add(nArea = new AreaElement(a, jSelection[a.J1.Id], jSelection[a.J2.Id], jSelection[a.J3.Id], (a.J4 != null) ? jSelection[a.J4.Id] : null));
newAreas.Add(nArea);
}
JoinCmd.Join(services.Model, newJoints, newLines, newAreas);
}