public ShowPropertyLine(Line line, IFrame frame) : base(frame)
{
this.line = line;
startPointProperty = new GeoPointProperty("Line.StartPoint", Frame, true);
startPointProperty.GetGeoPointEvent += new CADability.UserInterface.GeoPointProperty.GetGeoPointDelegate(OnGetStartPoint);
startPointProperty.SetGeoPointEvent += new CADability.UserInterface.GeoPointProperty.SetGeoPointDelegate(OnSetStartPoint);
startPointProperty.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyStartPointWithMouse);
startPointProperty.PropertyEntryChangedStateEvent += new PropertyEntryChangedStateDelegate(OnStateChanged);
endPointProperty = new GeoPointProperty("Line.EndPoint", Frame, true);
endPointProperty.GetGeoPointEvent += new CADability.UserInterface.GeoPointProperty.GetGeoPointDelegate(OnGetEndPoint);
endPointProperty.SetGeoPointEvent += new CADability.UserInterface.GeoPointProperty.SetGeoPointDelegate(OnSetEndPoint);
endPointProperty.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyEndPointWithMouse);
endPointProperty.PropertyEntryChangedStateEvent += new PropertyEntryChangedStateDelegate(OnStateChanged);
lengthProperty = new LengthProperty("Line.Length", Frame, true);
lengthProperty.GetLengthEvent += new CADability.UserInterface.LengthProperty.GetLengthDelegate(OnGetLength);
lengthProperty.SetLengthEvent += new CADability.UserInterface.LengthProperty.SetLengthDelegate(OnSetLength);
lengthProperty.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyLengthWithMouse);
lengthProperty.PropertyEntryChangedStateEvent += new PropertyEntryChangedStateDelegate(OnStateChanged);
lengthHotSpot = new LengthHotSpot(lengthProperty);
lengthHotSpot.Position = line.PointAt(2.0 / 3.0);
directionProperty = new GeoVectorProperty("Line.Direction", Frame, false);
directionProperty.IsNormedVector = true;
directionProperty.GetGeoVectorEvent += new CADability.UserInterface.GeoVectorProperty.GetGeoVectorDelegate(OnGetDirection);
directionProperty.SetGeoVectorEvent += new CADability.UserInterface.GeoVectorProperty.SetGeoVectorDelegate(OnSetDirection);
directionProperty.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyDirectionWithMouse);
directionProperty.PropertyEntryChangedStateEvent += new PropertyEntryChangedStateDelegate(OnStateChanged);
directionHotSpot = new GeoVectorHotSpot(directionProperty);
directionHotSpot.Position = line.PointAt(1.0 / 3.0);
IPropertyEntry[] sp = line.GetAttributeProperties(Frame); // change signature of GetAttributeProperties
attributeProperties = new IPropertyEntry[sp.Length];
for (int i = 0; i < sp.Length; i++)
{
attributeProperties[i] = sp[i] as IPropertyEntry;
}
base.resourceId = "Line.Object";
}
private IPropertyEntry[] attributeProperties; // Anzeigen für die Attribute (Ebene, Farbe u.s.w)
public ShowPropertyEllipse(Ellipse Ellipse, IFrame frame) : base(frame)
{
this.ellipse = Ellipse;
centerProperty = new GeoPointProperty("Ellipse.Center", Frame, true);
centerProperty.SetGeoPointEvent += new CADability.UserInterface.GeoPointProperty.SetGeoPointDelegate(OnSetCenter);
centerProperty.GetGeoPointEvent += new CADability.UserInterface.GeoPointProperty.GetGeoPointDelegate(OnGetCenter);
centerProperty.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyCenterWithMouse);
centerProperty.PropertyEntryChangedStateEvent += new PropertyEntryChangedStateDelegate(OnStateChanged);
majorRadiusProperty = new LengthProperty("Ellipse.MajorRadius", Frame, true);
majorRadiusProperty.SetLengthEvent += new CADability.UserInterface.LengthProperty.SetLengthDelegate(OnSetMajorRadius);
majorRadiusProperty.GetLengthEvent += new CADability.UserInterface.LengthProperty.GetLengthDelegate(OnGetMajorRadius);
majorRadiusProperty.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyMajorRadiusWithMouse);
majorRadiusProperty.PropertyEntryChangedStateEvent += new PropertyEntryChangedStateDelegate(OnStateChanged);
majorRadiusHotSpot = new LengthHotSpot[2];
majorRadiusHotSpot[0] = new LengthHotSpot(majorRadiusProperty);
majorRadiusHotSpot[0].Position = ellipse.Center + 2.0 / 3.0 * ellipse.MajorAxis;
majorRadiusHotSpot[1] = new LengthHotSpot(majorRadiusProperty);
majorRadiusHotSpot[1].Position = ellipse.Center - 2.0 / 3.0 * ellipse.MajorAxis;
minorRadiusProperty = new LengthProperty("Ellipse.MinorRadius", Frame, true);
minorRadiusProperty.SetLengthEvent += new CADability.UserInterface.LengthProperty.SetLengthDelegate(OnSetMinorRadius);
minorRadiusProperty.GetLengthEvent += new CADability.UserInterface.LengthProperty.GetLengthDelegate(OnGetMinorRadius);
minorRadiusProperty.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyMinorRadiusWithMouse);
minorRadiusProperty.PropertyEntryChangedStateEvent += new PropertyEntryChangedStateDelegate(OnStateChanged);
minorRadiusHotSpot = new LengthHotSpot[2];
minorRadiusHotSpot[0] = new LengthHotSpot(minorRadiusProperty);
minorRadiusHotSpot[0].Position = ellipse.Center + 2.0 / 3.0 * ellipse.MinorAxis;
minorRadiusHotSpot[1] = new LengthHotSpot(minorRadiusProperty);
minorRadiusHotSpot[1].Position = ellipse.Center - 2.0 / 3.0 * ellipse.MinorAxis;
majorAxisProperty = new GeoVectorProperty("Ellipse.MajorAxis", Frame, true);
majorAxisProperty.SetHotspotPosition(ellipse.Center + ellipse.MajorAxis);
majorAxisProperty.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyMajorAxisWithMouse);
majorAxisProperty.SetGeoVectorEvent += new CADability.UserInterface.GeoVectorProperty.SetGeoVectorDelegate(OnSetMajorAxis);
majorAxisProperty.GetGeoVectorEvent += new CADability.UserInterface.GeoVectorProperty.GetGeoVectorDelegate(OnGetMajorAxis);
majorAxisProperty.PropertyEntryChangedStateEvent += new PropertyEntryChangedStateDelegate(OnStateChanged);
majorAxisHotSpot = new GeoVectorHotSpot[2];
majorAxisHotSpot[0] = new GeoVectorHotSpot(majorAxisProperty);
majorAxisHotSpot[0].Position = ellipse.Center + ellipse.MajorAxis;
majorAxisHotSpot[1] = new GeoVectorHotSpot(majorAxisProperty);
majorAxisHotSpot[1].Position = ellipse.Center - ellipse.MajorAxis;
minorAxisProperty = new GeoVectorProperty("Ellipse.MinorAxis", Frame, true);
minorAxisProperty.SetHotspotPosition(ellipse.Center + ellipse.MinorAxis);
minorAxisProperty.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyMinorAxisWithMouse);
minorAxisProperty.SetGeoVectorEvent += new CADability.UserInterface.GeoVectorProperty.SetGeoVectorDelegate(OnSetMinorAxis);
minorAxisProperty.GetGeoVectorEvent += new CADability.UserInterface.GeoVectorProperty.GetGeoVectorDelegate(OnGetMinorAxis);
minorAxisProperty.PropertyEntryChangedStateEvent += new PropertyEntryChangedStateDelegate(OnStateChanged);
minorAxisHotSpot = new GeoVectorHotSpot[2];
minorAxisHotSpot[0] = new GeoVectorHotSpot(minorAxisProperty);
minorAxisHotSpot[0].Position = ellipse.Center + ellipse.MinorAxis;
minorAxisHotSpot[1] = new GeoVectorHotSpot(minorAxisProperty);
minorAxisHotSpot[1].Position = ellipse.Center - ellipse.MinorAxis;
if (Ellipse.IsArc)
{
startAngleProperty = new AngleProperty("Ellipse.StartAngle", Frame, true);
startAngleProperty.GetAngleEvent += new AngleProperty.GetAngleDelegate(OnGetStartAngle);
startAngleProperty.SetAngleEvent += new AngleProperty.SetAngleDelegate(OnSetStartAngle);
startAngleProperty.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyStartAngleWithMouse);
startAngleProperty.PropertyEntryChangedStateEvent += new PropertyEntryChangedStateDelegate(OnStateChanged);
startAngleHotSpot = new AngleHotSpot(startAngleProperty);
startAngleHotSpot.Position = ellipse.StartPoint;
endAngleProperty = new AngleProperty("Ellipse.EndAngle", Frame, true);
endAngleProperty.GetAngleEvent += new AngleProperty.GetAngleDelegate(OnGetEndAngle);
endAngleProperty.SetAngleEvent += new AngleProperty.SetAngleDelegate(OnSetEndAngle);
endAngleProperty.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyEndAngleWithMouse);
endAngleProperty.PropertyEntryChangedStateEvent += new PropertyEntryChangedStateDelegate(OnStateChanged);
endAngleHotSpot = new AngleHotSpot(endAngleProperty);
endAngleHotSpot.Position = ellipse.EndPoint;
directionProperty = new BooleanProperty("Ellipse.Direction", "Arc.Direction.Values");
directionProperty.BooleanValue = ellipse.SweepParameter > 0.0;
directionProperty.GetBooleanEvent += new CADability.UserInterface.BooleanProperty.GetBooleanDelegate(OnGetDirection);
directionProperty.SetBooleanEvent += new CADability.UserInterface.BooleanProperty.SetBooleanDelegate(OnSetDirection);
// hat keinen Hotspot
startPointProperty = new GeoPointProperty("Ellipse.StartPoint", Frame, false);
startPointProperty.GetGeoPointEvent += new CADability.UserInterface.GeoPointProperty.GetGeoPointDelegate(OnGetStartPoint);
startPointProperty.ReadOnly = true;
startPointProperty.PropertyEntryChangedStateEvent += new PropertyEntryChangedStateDelegate(OnStateChanged);
endPointProperty = new GeoPointProperty("Ellipse.EndPoint", Frame, false);
endPointProperty.GetGeoPointEvent += new CADability.UserInterface.GeoPointProperty.GetGeoPointDelegate(OnGetEndPoint);
endPointProperty.ReadOnly = true;
endPointProperty.PropertyEntryChangedStateEvent += new PropertyEntryChangedStateDelegate(OnStateChanged);
base.resourceId = "EllipseArc.Object";
}
else
{
if (Settings.GlobalSettings.GetBoolValue("CircleShowStartPointProperty", false))
{
startAngleProperty = new AngleProperty("Ellipse.StartAngle", Frame, true);
startAngleProperty.GetAngleEvent += new AngleProperty.GetAngleDelegate(OnGetStartAngle);
startAngleProperty.SetAngleEvent += new AngleProperty.SetAngleDelegate(OnSetStartAngle);
startAngleProperty.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyStartAngleWithMouse);
startAngleProperty.PropertyEntryChangedStateEvent += new PropertyEntryChangedStateDelegate(OnStateChanged);
startAngleHotSpot = new AngleHotSpot(startAngleProperty);
startAngleHotSpot.Position = ellipse.StartPoint;
directionProperty = new BooleanProperty("Ellipse.Direction", "Arc.Direction.Values");
directionProperty.BooleanValue = ellipse.SweepParameter > 0.0;
directionProperty.GetBooleanEvent += new CADability.UserInterface.BooleanProperty.GetBooleanDelegate(OnGetDirection);
directionProperty.SetBooleanEvent += new CADability.UserInterface.BooleanProperty.SetBooleanDelegate(OnSetDirection);
// hat keinen Hotspot
startPointProperty = new GeoPointProperty("Ellipse.StartPoint", Frame, false);
startPointProperty.GetGeoPointEvent += new CADability.UserInterface.GeoPointProperty.GetGeoPointDelegate(OnGetStartPoint);
startPointProperty.ReadOnly = true;
startPointProperty.PropertyEntryChangedStateEvent += new PropertyEntryChangedStateDelegate(OnStateChanged);
}
base.resourceId = "Ellipse.Object";
}
attributeProperties = ellipse.GetAttributeProperties(Frame);
}
private void Init()
{
// Initialisiert den gesammten Inhalt des TreeViews
// danach sollte meist propertyPage.Refresh(this); aufgerufen werden
subProperties = null;
if (dimension.DimType == Dimension.EDimType.DimPoints || dimension.DimType == Dimension.EDimType.DimCoord)
{
points = new MultiGeoPointProperty(this, "Dimension.Points", this.Frame);
points.ModifyWithMouseEvent += new CADability.UserInterface.MultiGeoPointProperty.ModifyWithMouseIndexDelegate(OnModifyPointWithMouse);
points.PropertyEntryChangedStateEvent += new PropertyEntryChangedStateDelegate(OnPointsStateChanged);
points.GeoPointSelectionChangedEvent += new CADability.UserInterface.GeoPointProperty.SelectionChangedDelegate(OnPointsSelectionChanged);
direction = new GeoVectorProperty("Dimension.Direction", Frame, true);
direction.GetGeoVectorEvent += new CADability.UserInterface.GeoVectorProperty.GetGeoVectorDelegate(OnGetDirection);
direction.SetGeoVectorEvent += new CADability.UserInterface.GeoVectorProperty.SetGeoVectorDelegate(OnSetDirection);
}
if (dimension.DimType == Dimension.EDimType.DimRadius)
{
radiusProperty = new DoubleProperty("Dimension.Radius", Frame);
radiusProperty.SetDoubleEvent += new CADability.UserInterface.DoubleProperty.SetDoubleDelegate(OnSetRadius);
radiusProperty.GetDoubleEvent += new CADability.UserInterface.DoubleProperty.GetDoubleDelegate(OnGetRadius);
radiusProperty.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyRadiusWithMouse);
radiusProperty.DoubleChanged();
}
if (dimension.DimType == Dimension.EDimType.DimDiameter)
{
radiusProperty = new DoubleProperty("Dimension.Diameter", Frame);
radiusProperty.SetDoubleEvent += new CADability.UserInterface.DoubleProperty.SetDoubleDelegate(OnSetRadius);
radiusProperty.GetDoubleEvent += new CADability.UserInterface.DoubleProperty.GetDoubleDelegate(OnGetRadius);
radiusProperty.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyRadiusWithMouse);
radiusProperty.DoubleChanged();
}
if (dimension.DimType == Dimension.EDimType.DimDiameter ||
dimension.DimType == Dimension.EDimType.DimRadius ||
dimension.DimType == Dimension.EDimType.DimLocation ||
dimension.DimType == Dimension.EDimType.DimAngle)
{ // haben alle einen Mittelpunkt als Punkt 0
centerProperty = new GeoPointProperty("Dimension.Center", Frame, true);
centerProperty.GetGeoPointEvent += new CADability.UserInterface.GeoPointProperty.GetGeoPointDelegate(OnGetCenter);
centerProperty.SetGeoPointEvent += new CADability.UserInterface.GeoPointProperty.SetGeoPointDelegate(OnSetCenter);
centerProperty.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyCenterWithMouse);
}
if (dimension.DimType == Dimension.EDimType.DimAngle)
{ // start- und Endwinkel
startAngle = new GeoVectorProperty("Dimension.Startangle", Frame, true);
startAngle.GetGeoVectorEvent += new CADability.UserInterface.GeoVectorProperty.GetGeoVectorDelegate(OnGetStartAngle);
startAngle.SetGeoVectorEvent += new CADability.UserInterface.GeoVectorProperty.SetGeoVectorDelegate(OnSetStartAngle);
startAngle.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyStartAngleWithMouse);
startAngle.SetHotspotPosition(dimension.GetPoint(1));
endAngle = new GeoVectorProperty("Dimension.Endangle", Frame, true);
endAngle.GetGeoVectorEvent += new CADability.UserInterface.GeoVectorProperty.GetGeoVectorDelegate(OnGetEndAngle);
endAngle.SetGeoVectorEvent += new CADability.UserInterface.GeoVectorProperty.SetGeoVectorDelegate(OnSetEndAngle);
endAngle.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyEndAngleWithMouse);
endAngle.SetHotspotPosition(dimension.GetPoint(2));
startAngleHotSpot = new GeoVectorHotSpot(startAngle);
endAngleHotSpot = new GeoVectorHotSpot(endAngle);
}
dimLineRef = new GeoPointProperty("Dimension.DimLineRef", Frame, true);
dimLineRef.GetGeoPointEvent += new CADability.UserInterface.GeoPointProperty.GetGeoPointDelegate(OnGetDimLineRef);
dimLineRef.SetGeoPointEvent += new CADability.UserInterface.GeoPointProperty.SetGeoPointDelegate(OnSetDimLineRef);
dimLineRef.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyDimLineRef);
dimLineRef.PropertyEntryChangedStateEvent += new PropertyEntryChangedStateDelegate(OnStateChanged);
// die String Eingabefelder:
int numprop = 1;
if (dimension.DimType == Dimension.EDimType.DimPoints || dimension.DimType == Dimension.EDimType.DimCoord)
{
numprop = dimension.PointCount - 1;
}
textPosHotSpot = new DoubleHotSpot[numprop];
textPos = new DoubleProperty[numprop];
dimText = new StringProperty[numprop];
tolPlusText = new StringProperty[numprop];
tolMinusText = new StringProperty[numprop];
prefix = new StringProperty[numprop];
postfix = new StringProperty[numprop];
postfixAlt = new StringProperty[numprop];
for (int i = 0; i < numprop; ++i)
{
textPos[i] = new DoubleProperty("Dimension.TextPos", Frame);
textPos[i].UserData.Add("Index", i);
textPos[i].GetDoubleEvent += new CADability.UserInterface.DoubleProperty.GetDoubleDelegate(OnGetTextPos);
textPos[i].SetDoubleEvent += new CADability.UserInterface.DoubleProperty.SetDoubleDelegate(OnSetTextPos);
textPos[i].DoubleChanged();
textPos[i].ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyTextPosWithMouse);
textPos[i].PropertyEntryChangedStateEvent += new PropertyEntryChangedStateDelegate(OnStateChanged);
textPosHotSpot[i] = new DoubleHotSpot(textPos[i]);
textPosHotSpot[i].Position = dimension.GetTextPosCoordinate(i, Frame.ActiveView.Projection);
dimText[i] = new StringProperty(dimension.GetDimText(i), "Dimension.DimText");
dimText[i].UserData.Add("Index", i);
dimText[i].SetStringEvent += new CADability.UserInterface.StringProperty.SetStringDelegate(OnSetDimText);
dimText[i].GetStringEvent += new CADability.UserInterface.StringProperty.GetStringDelegate(OnGetDimText);
tolPlusText[i] = new StringProperty(dimension.GetTolPlusText(i), "Dimension.TolPlusText");
tolPlusText[i].UserData.Add("Index", i);
tolPlusText[i].SetStringEvent += new CADability.UserInterface.StringProperty.SetStringDelegate(OnSetTolPlusText);
tolPlusText[i].GetStringEvent += new CADability.UserInterface.StringProperty.GetStringDelegate(OnGetTolPlusText);
tolMinusText[i] = new StringProperty(dimension.GetTolMinusText(i), "Dimension.TolMinusText");
tolMinusText[i].UserData.Add("Index", i);
tolMinusText[i].SetStringEvent += new CADability.UserInterface.StringProperty.SetStringDelegate(OnSetTolMinusText);
tolMinusText[i].GetStringEvent += new CADability.UserInterface.StringProperty.GetStringDelegate(OnGetTolMinusText);
prefix[i] = new StringProperty(dimension.GetPrefix(i), "Dimension.Prefix");
prefix[i].UserData.Add("Index", i);
prefix[i].SetStringEvent += new CADability.UserInterface.StringProperty.SetStringDelegate(OnSetPrefix);
prefix[i].GetStringEvent += new CADability.UserInterface.StringProperty.GetStringDelegate(OnGetPrefix);
postfix[i] = new StringProperty(dimension.GetPostfix(i), "Dimension.Postfix");
postfix[i].UserData.Add("Index", i);
postfix[i].SetStringEvent += new CADability.UserInterface.StringProperty.SetStringDelegate(OnSetPostfix);
postfix[i].GetStringEvent += new CADability.UserInterface.StringProperty.GetStringDelegate(OnGetPostfix);
postfixAlt[i] = new StringProperty(dimension.GetPostfixAlt(i), "Dimension.PostfixAlt");
postfixAlt[i].UserData.Add("Index", i);
postfixAlt[i].SetStringEvent += new CADability.UserInterface.StringProperty.SetStringDelegate(OnSetPostfixAlt);
postfixAlt[i].GetStringEvent += new CADability.UserInterface.StringProperty.GetStringDelegate(OnGetPostfixAlt);
}
}
private void InitSubEntries()
{
vertexProperty = new MultiGeoPointProperty(new VertexIndexedGeoPoint(this), "Polyline.Vertex", this.Frame);
vertexProperty.ModifyWithMouseEvent += new CADability.UserInterface.MultiGeoPointProperty.ModifyWithMouseIndexDelegate(OnModifyVertexWithMouse);
vertexProperty.GeoPointSelectionChangedEvent += new CADability.UserInterface.GeoPointProperty.SelectionChangedDelegate(OnPointsSelectionChanged);
(vertexProperty as IPropertyEntry).PropertyEntryChangedStateEvent += OnVertexPropertyStateChanged;
vertexProperty.PrependContextMenue = MenuResource.LoadMenuDefinition("MenuId.Path.Vertex", false, this);
if (polyline.IsRectangle)
{
subEntries = new IPropertyEntry[2];
locationProperty = new GeoPointProperty("Rectangle.Location", Frame, true);
locationProperty.GetGeoPointEvent += new CADability.UserInterface.GeoPointProperty.GetGeoPointDelegate(OnGetLocation);
locationProperty.SetGeoPointEvent += new CADability.UserInterface.GeoPointProperty.SetGeoPointDelegate(OnSetLocation);
locationProperty.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyLocationWithMouse);
LengthProperty width = new LengthProperty("Rectangle.Width", Frame, true);
width.GetLengthEvent += new CADability.UserInterface.LengthProperty.GetLengthDelegate(OnGetWidth);
width.SetLengthEvent += new CADability.UserInterface.LengthProperty.SetLengthDelegate(OnSetWidth);
width.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyWidthWithMouse);
widthHotSpot = new ShowPropertyHotSpot(width, Frame);
widthHotSpot.Position = polyline.RectangleLocation + 0.5 * polyline.ParallelogramSecondaryDirection + polyline.ParallelogramMainDirection;
widthHotSpot.PositionChangedEvent += new CADability.UserInterface.ShowPropertyHotSpot.PositionChangedDelegate(OnWidthPositionChanged);
LengthProperty height = new LengthProperty("Rectangle.Height", Frame, true);
height.GetLengthEvent += new CADability.UserInterface.LengthProperty.GetLengthDelegate(OnGetHeight);
height.SetLengthEvent += new CADability.UserInterface.LengthProperty.SetLengthDelegate(OnSetHeight);
height.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyHeightWithMouse);
heightHotSpot = new ShowPropertyHotSpot(height, Frame);
heightHotSpot.Position = polyline.RectangleLocation + polyline.ParallelogramSecondaryDirection + 0.5 * polyline.ParallelogramMainDirection;
heightHotSpot.PositionChangedEvent += new CADability.UserInterface.ShowPropertyHotSpot.PositionChangedDelegate(OnHeightPositionChanged);
GeoVectorProperty direction = new GeoVectorProperty("Rectangle.Direction", Frame, true);
direction.GetGeoVectorEvent += new CADability.UserInterface.GeoVectorProperty.GetGeoVectorDelegate(OnGetDirectionX);
direction.SetGeoVectorEvent += new CADability.UserInterface.GeoVectorProperty.SetGeoVectorDelegate(OnSetDirectionX);
direction.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyDirectionXWithMouse);
directionHotSpot = new GeoVectorHotSpot(direction);
directionHotSpot.Position = polyline.RectangleLocation + polyline.ParallelogramMainDirection;
sizeHotSpot = new GeoPointHotSpot(polyline.RectangleLocation + polyline.ParallelogramSecondaryDirection + polyline.ParallelogramMainDirection);
sizeHotSpot.StartDragHotspotEvent += new GeoPointHotSpot.StartDragHotspotDelegate(OnSizeHotSpotStartDragHotspot);
rectangleProperty = new GroupProperty("Polyline.Rectangle", new IPropertyEntry[] { locationProperty, width, height, direction });
subEntries[0] = rectangleProperty;
(rectangleProperty as IPropertyEntry).PropertyEntryChangedStateEvent += OnRectanglePropertyStateChanged;
subEntries[1] = vertexProperty;
}
else
if (polyline.IsParallelogram)
{
subEntries = new IPropertyEntry[2];
locationParallelProperty = new GeoPointProperty("Rectangle.Location", Frame, true);
locationParallelProperty.GetGeoPointEvent += new CADability.UserInterface.GeoPointProperty.GetGeoPointDelegate(OnGetParallelLocation);
locationParallelProperty.SetGeoPointEvent += new CADability.UserInterface.GeoPointProperty.SetGeoPointDelegate(OnSetParallelLocation);
locationParallelProperty.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyLocationWithMouse);
/*
* LengthProperty widthParallel = new LengthProperty("Rectangle.Width",Frame,true);
* widthParallel.OnGetLength += new Condor.LengthProperty.GetLengthDelegate(OnGetWidthParallel);
* widthParallel.OnSetLength += new Condor.LengthProperty.SetLengthDelegate(OnSetWidthParallel);
* widthParallel.ModifyWithMouse += new ModifyWithMouseDelegate(ModifyWidthWithMouse);
* widthParallelHotSpot = new ShowPropertyHotSpot(widthParallel,Frame);
* widthParallelHotSpot.Position = polyline.ParallelogramLocation+0.5*polyline.ParallelogramSecondaryDirection+polyline.ParallelogramMainDirection;
* widthParallelHotSpot.PositionChanged += new Condor.ShowPropertyHotSpot.PositionChangedDelegate(OnWidthParallelPositionChanged);
*
* LengthProperty heightParallel = new LengthProperty("Rectangle.Height",Frame,true);
* heightParallel.OnGetLength += new Condor.LengthProperty.GetLengthDelegate(OnGetHeightParallel);
* heightParallel.OnSetLength += new Condor.LengthProperty.SetLengthDelegate(OnSetHeightParallel);
* heightParallel.ModifyWithMouse += new ModifyWithMouseDelegate(ModifyHeightParallelWithMouse);
* heightParallelHotSpot = new ShowPropertyHotSpot(height,Frame);
* heightParallelHotSpot.Position = polyline.ParallelogramLocation+polyline.ParallelogramSecondaryDirection+0.5*polyline.ParallelogramMainDirection;
* heightParallelHotSpot.PositionChanged += new Condor.ShowPropertyHotSpot.PositionChangedDelegate(OnHeightPositionChanged);
*
*/
GeoVectorProperty directionXParallel = new GeoVectorProperty("Parallelogram.DirectionX", Frame, true);
directionXParallel.GetGeoVectorEvent += new CADability.UserInterface.GeoVectorProperty.GetGeoVectorDelegate(OnGetDirectionXParallel);
directionXParallel.SetGeoVectorEvent += new CADability.UserInterface.GeoVectorProperty.SetGeoVectorDelegate(OnSetDirectionXParallel);
directionXParallel.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyDirectionXParallelWithMouse);
directionXParallelHotSpot = new GeoVectorHotSpot(directionXParallel);
directionXParallelHotSpot.Position = polyline.ParallelogramLocation + polyline.ParallelogramMainDirection;
GeoVectorProperty directionYParallel = new GeoVectorProperty("Parallelogram.DirectionY", Frame, true);
directionYParallel.GetGeoVectorEvent += new CADability.UserInterface.GeoVectorProperty.GetGeoVectorDelegate(OnGetDirectionYParallel);
directionYParallel.SetGeoVectorEvent += new CADability.UserInterface.GeoVectorProperty.SetGeoVectorDelegate(OnSetDirectionYParallel);
directionYParallel.ModifyWithMouseEvent += new ModifyWithMouseDelegate(ModifyDirectionXParallelWithMouse);
directionYParallelHotSpot = new GeoVectorHotSpot(directionYParallel);
directionYParallelHotSpot.Position = polyline.ParallelogramLocation + polyline.ParallelogramSecondaryDirection;
// parallelProperty = new GroupProperty("Polyline.Parallel", new IPropertyEntry [] {locationParallelProperty,widthParallel,heightParallel,directionParallel});
sizeHotSpot = new GeoPointHotSpot(polyline.ParallelogramLocation + polyline.ParallelogramSecondaryDirection + polyline.ParallelogramMainDirection);
sizeHotSpot.StartDragHotspotEvent += new GeoPointHotSpot.StartDragHotspotDelegate(OnSizeHotSpotStartDragHotspot);
parallelProperty = new GroupProperty("Polyline.Parallel", new IPropertyEntry[] { locationParallelProperty, directionXParallel, directionYParallel });
subEntries[0] = parallelProperty;
(parallelProperty as IPropertyEntry).PropertyEntryChangedStateEvent += OnParallelPropertyStateChanged;
subEntries[1] = vertexProperty;
}
else
{
subEntries = new IPropertyEntry[1];
subEntries[0] = vertexProperty;
}
attributeProperties = polyline.GetAttributeProperties(Frame);
}