public void SetUp()
{
conf = new DefaultCollisionConfiguration();
dispatcher = new CollisionDispatcher(conf);
broadphase = new AxisSweep3(new Vector3(-1000, -1000, -1000), new Vector3(1000, 1000, 1000));
world = new DiscreteDynamicsWorld(dispatcher, broadphase, null, conf);
// Initialize TriangleIndexVertexArray with float array
indexVertexArray = new TriangleIndexVertexArray(TorusMesh.Indices, TorusMesh.Vertices);
gImpactMeshShape = new GImpactMeshShape(indexVertexArray);
gImpactMeshShape.CalculateLocalInertia(1.0f);
gImpactMesh = CreateBody(1.0f, gImpactMeshShape, Vector3.Zero);
// Initialize TriangleIndexVertexArray with Vector3 array
Vector3[] torusVertices = new Vector3[TorusMesh.Vertices.Length / 3];
for (int i = 0; i < torusVertices.Length; i++)
{
torusVertices[i] = new Vector3(
TorusMesh.Vertices[i * 3],
TorusMesh.Vertices[i * 3 + 1],
TorusMesh.Vertices[i * 3 + 2]);
}
indexVertexArray2 = new TriangleIndexVertexArray(TorusMesh.Indices, torusVertices);
triangleMeshShape = new BvhTriangleMeshShape(indexVertexArray2, true);
// CalculateLocalInertia must fail for static shapes (shapes based on TriangleMeshShape)
//triangleMeshShape.CalculateLocalInertia(1.0f);
triangleMesh = CreateBody(0.0f, triangleMeshShape, Vector3.Zero);
}
public ScaledBvhTriangleMeshShape(BvhTriangleMeshShape childShape, Vector3 localScaling)
{
IntPtr native = btScaledBvhTriangleMeshShape_new(childShape.Native, ref localScaling);
InitializeCollisionShape(native);
ChildShape = childShape;
}
public unsafe static void PartialRefitTree(this BvhTriangleMeshShape obj, ref OpenTK.Vector3 aabbMin, ref OpenTK.Vector3 aabbMax)
{
fixed(OpenTK.Vector3 *aabbMinPtr = &aabbMin)
{
fixed(OpenTK.Vector3 *aabbMaxPtr = &aabbMax)
{
obj.PartialRefitTree(ref *(BulletSharp.Math.Vector3 *)aabbMinPtr, ref *(BulletSharp.Math.Vector3 *)aabbMaxPtr);
}
}
}
public override void Run()
{
var conf = new DefaultCollisionConfiguration();
var dispatcher = new CollisionDispatcher(conf);
var broadphase = new AxisSweep3(new Vector3(-1000, -1000, -1000), new Vector3(1000, 1000, 1000));
world = new DiscreteDynamicsWorld(dispatcher, broadphase, null, conf);
var indexVertexArray = new TriangleIndexVertexArray(TorusMesh.Indices, TorusMesh.Vertices);
foreach (var indexedMesh in indexVertexArray.IndexedMeshArray)
{
indexedMesh.ToString();
}
AddToDisposeQueue(indexVertexArray);
var gImpactMesh = new GImpactMeshShape(indexVertexArray);
Vector3 aabbMin, aabbMax;
gImpactMesh.GetAabb(Matrix.Identity, out aabbMin, out aabbMax);
CreateBody(1.0f, gImpactMesh, Vector3.Zero);
AddToDisposeQueue(gImpactMesh);
gImpactMesh = null;
var triangleMesh = new BvhTriangleMeshShape(indexVertexArray, true);
triangleMesh.CalculateLocalInertia(1.0f);
triangleMesh.GetAabb(Matrix.Identity, out aabbMin, out aabbMax);
CreateBody(1.0f, triangleMesh, Vector3.Zero);
AddToDisposeQueue(triangleMesh);
triangleMesh = null;
indexVertexArray = null;
AddToDisposeQueue(conf);
AddToDisposeQueue(dispatcher);
AddToDisposeQueue(broadphase);
AddToDisposeQueue(world);
//conf.Dispose();
conf = null;
//dispatcher.Dispose();
dispatcher = null;
//broadphase.Dispose();
broadphase = null;
for (int i = 0; i < 600; i++)
{
world.StepSimulation(1.0f / 60.0f);
}
world.Dispose();
world = null;
ForceGC();
TestWeakRefs();
ClearRefs();
}
public void SetUp()
{
conf = new DefaultCollisionConfiguration();
dispatcher = new CollisionDispatcher(conf);
broadphase = new AxisSweep3(new Vector3(-1000, -1000, -1000), new Vector3(1000, 1000, 1000));
world = new DiscreteDynamicsWorld(dispatcher, broadphase, null, conf);
indexVertexArray = new TriangleIndexVertexArray(TorusMesh.Indices, TorusMesh.Vertices);
gImpactMeshShape = new GImpactMeshShape(indexVertexArray);
triangleMeshShape = new BvhTriangleMeshShape(indexVertexArray, true);
triangleMeshShape.CalculateLocalInertia(1.0f);
gImpactMesh = CreateBody(1.0f, gImpactMeshShape, Vector3.Zero);
triangleMesh = CreateBody(1.0f, triangleMeshShape, Vector3.Zero);
}
public BulletTriangleMesh(IModelo model, Vector3 pos, Matrix rotation, Vector3 scale)
{
TriangleMesh TriangleMesh = new BulletSharp.TriangleMesh(true,false);
Vector3[] vertices = null;
int[] indices = null;
ExtractData(ref vertices, ref indices, model);
for (int i = 0; i < indices.Count(); i+=3)
{
TriangleMesh.AddTriangle(vertices[indices[i]], vertices[indices[i+1]], vertices[indices[i+2]]);
}
vertices = null;
indices = null;
BvhTriangleMeshShape = new BvhTriangleMeshShape(TriangleMesh, true, true);
this.Shape = BvhTriangleMeshShape;
this.Scale = scale;
Shape.LocalScaling = scale;
Object = LocalCreateRigidBody(0, Matrix.CreateTranslation(pos) * rotation, Shape);
}
protected override void OnInitializePhysics()
{
// collision configuration contains default setup for memory, collision setup
CollisionConf = new DefaultCollisionConfiguration();
Dispatcher = new CollisionDispatcher(CollisionConf);
Vector3 worldMin = new Vector3(-1000, -1000, -1000);
Vector3 worldMax = new Vector3(1000, 1000, 1000);
Broadphase = new AxisSweep3(worldMin, worldMax);
Solver = new SequentialImpulseConstraintSolver();
World = new DiscreteDynamicsWorld(Dispatcher, Broadphase, Solver, CollisionConf);
World.SolverInfo.SplitImpulse = 1;
World.Gravity = new Vector3(0, -10, 0);
const int totalVerts = NUM_VERTS_X * NUM_VERTS_Y;
const int totalTriangles = 2 * (NUM_VERTS_X - 1) * (NUM_VERTS_Y - 1);
indexVertexArrays = new TriangleIndexVertexArray();
IndexedMesh mesh = new IndexedMesh();
mesh.Allocate(totalVerts, totalTriangles, 3 * sizeof(int), Vector3.SizeInBytes, PhyScalarType.Int32, PhyScalarType.Single);
using (var indices = mesh.LockIndices())
{
for (int i = 0; i < NUM_VERTS_X - 1; i++)
{
for (int j = 0; j < NUM_VERTS_Y - 1; j++)
{
indices.Write(j * NUM_VERTS_X + i);
indices.Write(j * NUM_VERTS_X + i + 1);
indices.Write((j + 1) * NUM_VERTS_X + i + 1);
indices.Write(j * NUM_VERTS_X + i);
indices.Write((j + 1) * NUM_VERTS_X + i + 1);
indices.Write((j + 1) * NUM_VERTS_X + i);
}
}
}
indexVertexArrays.AddIndexedMesh(mesh);
raycastBar = new RaycastBar(4000.0f, 0.0f);
//raycastBar = new RaycastBar(true, 40.0f, -50.0f, 50.0f);
CollisionShape colShape = new BoxShape(1);
CollisionShapes.Add(colShape);
for (int i = 0; i < 10; i++)
{
//CollisionShape colShape = new CapsuleShape(0.5f,2.0f);//boxShape = new SphereShape(1.0f);
Matrix startTransform = Matrix.Translation(2 * i, 10, 1);
LocalCreateRigidBody(1.0f, startTransform, colShape);
}
SetVertexPositions(waveHeight, 0.0f);
const bool useQuantizedAabbCompression = true;
groundShape = new BvhTriangleMeshShape(indexVertexArrays, useQuantizedAabbCompression);
CollisionShapes.Add(groundShape);
staticBody = LocalCreateRigidBody(0.0f, Matrix.Identity, groundShape);
staticBody.CollisionFlags |= CollisionFlags.StaticObject;
staticBody.UserObject = "Ground";
}
public ScaledBvhTriangleMeshShape(BvhTriangleMeshShape childShape, Vector3 localScaling)
: base(btScaledBvhTriangleMeshShape_new(childShape._native, ref localScaling))
{
_childShape = childShape;
}
protected override void OnInitializePhysics()
{
CollisionShape groundShape = new BoxShape(50, 3, 50);
CollisionShapes.Add(groundShape);
CollisionConf = new DefaultCollisionConfiguration();
Dispatcher = new CollisionDispatcher(CollisionConf);
Solver = new SequentialImpulseConstraintSolver();
Vector3 worldMin = new Vector3(-10000, -10000, -10000);
Vector3 worldMax = new Vector3(10000, 10000, 10000);
Broadphase = new AxisSweep3(worldMin, worldMax);
//Broadphase = new DbvtBroadphase();
World = new DiscreteDynamicsWorld(Dispatcher, Broadphase, Solver, CollisionConf);
int i;
Matrix tr;
Matrix vehicleTr;
//if (UseTrimeshGround)
{
const float scale = 20.0f;
//create a triangle-mesh ground
const int NumVertsX = 20;
const int NumVertsY = 20;
const int totalVerts = NumVertsX * NumVertsY;
const int totalTriangles = 2 * (NumVertsX - 1) * (NumVertsY - 1);
TriangleIndexVertexArray vertexArray = new TriangleIndexVertexArray();
IndexedMesh mesh = new IndexedMesh();
mesh.Allocate(totalTriangles, totalVerts);
mesh.NumTriangles = totalTriangles;
mesh.NumVertices = totalVerts;
mesh.TriangleIndexStride = 3 * sizeof(int);
mesh.VertexStride = Vector3.SizeInBytes;
using (var indicesStream = mesh.GetTriangleStream())
{
var indices = new BinaryWriter(indicesStream);
for (i = 0; i < NumVertsX - 1; i++)
{
for (int j = 0; j < NumVertsY - 1; j++)
{
indices.Write(j * NumVertsX + i);
indices.Write(j * NumVertsX + i + 1);
indices.Write((j + 1) * NumVertsX + i + 1);
indices.Write(j * NumVertsX + i);
indices.Write((j + 1) * NumVertsX + i + 1);
indices.Write((j + 1) * NumVertsX + i);
}
}
indices.Dispose();
}
using (var vertexStream = mesh.GetVertexStream())
{
var vertices = new BinaryWriter(vertexStream);
for (i = 0; i < NumVertsX; i++)
{
for (int j = 0; j < NumVertsY; j++)
{
float wl = .2f;
float height = 20.0f * (float)(Math.Sin(i * wl) * Math.Cos(j * wl));
vertices.Write((i - NumVertsX * 0.5f) * scale);
vertices.Write(height);
vertices.Write((j - NumVertsY * 0.5f) * scale);
}
}
vertices.Dispose();
}
vertexArray.AddIndexedMesh(mesh);
groundShape = new BvhTriangleMeshShape(vertexArray, true);
tr = Matrix.Identity;
vehicleTr = Matrix.Translation(0, -2, 0);
}/*
else
{
// Use HeightfieldTerrainShape
int width = 40, length = 40;
//int width = 128, length = 128; // Debugging is too slow for this
float maxHeight = 10.0f;
float heightScale = maxHeight / 256.0f;
Vector3 scale = new Vector3(20.0f, maxHeight, 20.0f);
//PhyScalarType scalarType = PhyScalarType.PhyUChar;
//FileStream file = new FileStream(heightfieldFile, FileMode.Open, FileAccess.Read);
// Use float data
PhyScalarType scalarType = PhyScalarType.PhyFloat;
byte[] terr = new byte[width * length * 4];
MemoryStream file = new MemoryStream(terr);
BinaryWriter writer = new BinaryWriter(file);
for (i = 0; i < width; i++)
for (int j = 0; j < length; j++)
writer.Write((float)((maxHeight / 2) + 4 * Math.Sin(j * 0.5f) * Math.Cos(i)));
writer.Flush();
file.Position = 0;
HeightfieldTerrainShape heightterrainShape = new HeightfieldTerrainShape(width, length,
file, heightScale, 0, maxHeight, upIndex, scalarType, false);
heightterrainShape.SetUseDiamondSubdivision(true);
groundShape = heightterrainShape;
groundShape.LocalScaling = new Vector3(scale.X, 1, scale.Z);
tr = Matrix.Translation(new Vector3(-scale.X / 2, scale.Y / 2, -scale.Z / 2));
vehicleTr = Matrix.Translation(new Vector3(20, 3, -3));
// Create graphics object
file.Position = 0;
BinaryReader reader = new BinaryReader(file);
int totalTriangles = (width - 1) * (length - 1) * 2;
int totalVerts = width * length;
game.groundMesh = new Mesh(game.Device, totalTriangles, totalVerts,
MeshFlags.SystemMemory | MeshFlags.Use32Bit, VertexFormat.Position | VertexFormat.Normal);
SlimDX.DataStream data = game.groundMesh.LockVertexBuffer(LockFlags.None);
for (i = 0; i < width; i++)
{
for (int j = 0; j < length; j++)
{
float height;
if (scalarType == PhyScalarType.PhyFloat)
{
// heightScale isn't applied internally for float data
height = reader.ReadSingle();
}
else if (scalarType == PhyScalarType.PhyUChar)
{
height = file.ReadByte() * heightScale;
}
else
{
height = 0.0f;
}
data.Write((j - length * 0.5f) * scale.X);
data.Write(height);
data.Write((i - width * 0.5f) * scale.Z);
// Normals will be calculated later
data.Position += 12;
}
}
game.groundMesh.UnlockVertexBuffer();
file.Close();
data = game.groundMesh.LockIndexBuffer(LockFlags.None);
for (i = 0; i < width - 1; i++)
{
for (int j = 0; j < length - 1; j++)
{
// Using diamond subdivision
if ((j + i) % 2 == 0)
{
data.Write(j * width + i);
data.Write((j + 1) * width + i + 1);
data.Write(j * width + i + 1);
data.Write(j * width + i);
data.Write((j + 1) * width + i);
data.Write((j + 1) * width + i + 1);
}
else
{
data.Write(j * width + i);
data.Write((j + 1) * width + i);
data.Write(j * width + i + 1);
data.Write(j * width + i + 1);
data.Write((j + 1) * width + i);
data.Write((j + 1) * width + i + 1);
}
/ *
// Not using diamond subdivision
data.Write(j * width + i);
data.Write((j + 1) * width + i);
data.Write(j * width + i + 1);
data.Write(j * width + i + 1);
data.Write((j + 1) * width + i);
data.Write((j + 1) * width + i + 1);
* /
}
}
game.groundMesh.UnlockIndexBuffer();
game.groundMesh.ComputeNormals();
}*/
CollisionShapes.Add(groundShape);
//create ground object
RigidBody ground = LocalCreateRigidBody(0, tr, groundShape);
ground.UserObject = "Ground";
CollisionShape chassisShape = new BoxShape(1.0f, 0.5f, 2.0f);
CollisionShapes.Add(chassisShape);
CompoundShape compound = new CompoundShape();
CollisionShapes.Add(compound);
//localTrans effectively shifts the center of mass with respect to the chassis
Matrix localTrans = Matrix.Translation(Vector3.UnitY);
compound.AddChildShape(localTrans, chassisShape);
RigidBody carChassis = LocalCreateRigidBody(800, Matrix.Identity, compound);
carChassis.UserObject = "Chassis";
//carChassis.SetDamping(0.2f, 0.2f);
//CylinderShapeX wheelShape = new CylinderShapeX(wheelWidth, wheelRadius, wheelRadius);
// clientResetScene();
// create vehicle
VehicleTuning tuning = new VehicleTuning();
IVehicleRaycaster vehicleRayCaster = new DefaultVehicleRaycaster(World);
//vehicle = new RaycastVehicle(tuning, carChassis, vehicleRayCaster);
vehicle = new CustomVehicle(tuning, carChassis, vehicleRayCaster);
carChassis.ActivationState = ActivationState.DisableDeactivation;
World.AddAction(vehicle);
const float connectionHeight = 1.2f;
bool isFrontWheel = true;
// choose coordinate system
vehicle.SetCoordinateSystem(rightIndex, upIndex, forwardIndex);
BulletSharp.Math.Vector3 connectionPointCS0 = new Vector3(CUBE_HALF_EXTENTS - (0.3f * wheelWidth), connectionHeight, 2 * CUBE_HALF_EXTENTS - wheelRadius);
vehicle.AddWheel(connectionPointCS0, wheelDirectionCS0, wheelAxleCS, suspensionRestLength, wheelRadius, tuning, isFrontWheel);
connectionPointCS0 = new Vector3(-CUBE_HALF_EXTENTS + (0.3f * wheelWidth), connectionHeight, 2 * CUBE_HALF_EXTENTS - wheelRadius);
vehicle.AddWheel(connectionPointCS0, wheelDirectionCS0, wheelAxleCS, suspensionRestLength, wheelRadius, tuning, isFrontWheel);
isFrontWheel = false;
connectionPointCS0 = new Vector3(-CUBE_HALF_EXTENTS + (0.3f * wheelWidth), connectionHeight, -2 * CUBE_HALF_EXTENTS + wheelRadius);
vehicle.AddWheel(connectionPointCS0, wheelDirectionCS0, wheelAxleCS, suspensionRestLength, wheelRadius, tuning, isFrontWheel);
connectionPointCS0 = new Vector3(CUBE_HALF_EXTENTS - (0.3f * wheelWidth), connectionHeight, -2 * CUBE_HALF_EXTENTS + wheelRadius);
vehicle.AddWheel(connectionPointCS0, wheelDirectionCS0, wheelAxleCS, suspensionRestLength, wheelRadius, tuning, isFrontWheel);
for (i = 0; i < vehicle.NumWheels; i++)
{
WheelInfo wheel = vehicle.GetWheelInfo(i);
wheel.SuspensionStiffness = suspensionStiffness;
wheel.WheelsDampingRelaxation = suspensionDamping;
wheel.WheelsDampingCompression = suspensionCompression;
wheel.FrictionSlip = wheelFriction;
wheel.RollInfluence = rollInfluence;
}
vehicle.RigidBody.WorldTransform = vehicleTr;
}
public override void Run()
{
#region Create renderers
// Note: the renderers take care of creating their own
// device resources and listen for DeviceManager.OnInitialize
// Create a axis-grid renderer
var axisGrid = ToDispose(new AxisGridRenderer());
axisGrid.Initialize(this);
// Create and initialize the mesh renderer
var loadedMesh = Common.Mesh.LoadFromFile("PhysicsScene1.cmo");
List <MeshRenderer> meshes = new List <MeshRenderer>();
meshes.AddRange(from mesh in loadedMesh
select ToDispose(new MeshRenderer(mesh)));
foreach (var m in meshes)
{
m.Initialize(this);
m.World = Matrix.Identity;
}
// Set the first animation as the current animation and start clock
foreach (var m in meshes)
{
if (m.Mesh.Animations != null && m.Mesh.Animations.Any())
{
m.CurrentAnimation = m.Mesh.Animations.First().Value;
}
m.Clock.Start();
}
loadedMesh = Common.Mesh.LoadFromFile("SubdividedPlane.cmo");
var waterMesh = ToDispose(new MeshRenderer(loadedMesh.First()));
waterMesh.Initialize(this);
loadedMesh = Common.Mesh.LoadFromFile("Bataux.cmo");
List <MeshRenderer> shipMeshes = new List <MeshRenderer>();
shipMeshes.AddRange((from mesh in loadedMesh
select ToDispose(new MeshRenderer(mesh))));
foreach (var m in shipMeshes)
{
m.Initialize(this);
m.World = Matrix.Scaling(3) * Matrix.RotationAxis(Vector3.UnitY, -1.57079f);
}
//var anchor = new SphereRenderer(0.05f);
//anchor.Initialize(this);
//var anchorWorld = Matrix.Identity;
//var sphere = new SphereRenderer();
//sphere.Initialize(this);
//var sphereWorld = Matrix.Identity;
// Create and initialize a Direct2D FPS text renderer
var fps = ToDispose(new Common.FpsRenderer("Calibri", Color.CornflowerBlue, new Point(8, 8), 16));
fps.Initialize(this);
// Create and initialize a general purpose Direct2D text renderer
// This will display some instructions and the current view and rotation offsets
var textRenderer = ToDispose(new Common.TextRenderer("Calibri", Color.CornflowerBlue, new Point(8, 40), 12));
textRenderer.Initialize(this);
#endregion
#region Initialize physics engine
CollisionConfiguration defaultConfig = new DefaultCollisionConfiguration();
ConstraintSolver solver = new SequentialImpulseConstraintSolver();
BulletSharp.Dispatcher dispatcher = new CollisionDispatcher(defaultConfig);
BroadphaseInterface broadphase = new DbvtBroadphase();
DynamicsWorld world = null;
Action initializePhysics = () =>
{
RemoveAndDispose(ref world);
world = ToDispose(new BulletSharp.DiscreteDynamicsWorld(dispatcher, broadphase, solver, defaultConfig));
world.Gravity = new Vector3(0, -10, 0);
// For each mesh, create a RigidBody and add to "world" for simulation
meshes.ForEach(m =>
{
// We use the name of the mesh to determine the correct body
if (String.IsNullOrEmpty(m.Mesh.Name))
{
return;
}
var name = m.Mesh.Name.ToLower();
var extent = m.Mesh.Extent;
BulletSharp.CollisionShape shape;
#region Create collision shape
if (name.Contains("box") || name.Contains("cube"))
{
// Assumes the box/cube has an axis-aligned neutral orientation
shape = new BulletSharp.BoxShape(
Math.Abs(extent.Max.Z - extent.Min.Z) / 2.0f,
Math.Abs(extent.Max.Y - extent.Min.Y) / 2.0f,
Math.Abs(extent.Max.X - extent.Min.X) / 2.0f);
}
else if (name.Contains("sphere"))
{
shape = new BulletSharp.SphereShape(extent.Radius);
}
else // use mesh vertices directly
{
// for each SubMesh, retrieve the vertex and index buffers
// to create a TriangleMeshShape for collision detection.
List <Vector3> vertices = new List <Vector3>();
List <int> indices = new List <int>();
int vertexOffset = 0;
foreach (var sm in m.Mesh.SubMeshes)
{
vertexOffset += vertices.Count;
indices.AddRange(
(from indx in m.Mesh.IndexBuffers[(int)sm.IndexBufferIndex]
select vertexOffset + (int)indx));
vertices.AddRange(
(from v in m.Mesh
.VertexBuffers[(int)sm.VertexBufferIndex]
select v.Position - extent.Center));
}
// Create the collision shape
var iva = new BulletSharp.TriangleIndexVertexArray(indices.ToArray(), vertices.ToArray());
shape = new BulletSharp.BvhTriangleMeshShape(iva, true);
}
#endregion
m.World = Matrix.Identity; // Reset mesh location
float mass; Vector3 vec;
shape.GetBoundingSphere(out vec, out mass);
var body = new BulletSharp.RigidBody(
new BulletSharp.RigidBodyConstructionInfo(name.Contains("static") ? 0 : mass,
new MeshMotionState(m),
shape, shape.CalculateLocalInertia(mass)));
if (body.IsStaticObject)
{
body.Restitution = 1f;
body.Friction = 0.4f;
}
// Add to the simulation
world.AddRigidBody(body);
});
#if DEBUG
world.DebugDrawer = ToDispose(new PhysicsDebugDraw(this.DeviceManager));
world.DebugDrawer.DebugMode = DebugDrawModes.DrawAabb | DebugDrawModes.DrawWireframe;
#endif
};
initializePhysics();
// Newton's Cradle
//var box = new Jitter.Dynamics.RigidBody(new Jitter.Collision.Shapes.BoxShape(7, 1, 2));
//box.Position = new Jitter.LinearMath.JVector(0, 8, 0);
//world.AddBody(box);
//box.IsStatic = true;
//var anchorBody = new Jitter.Dynamics.RigidBody(new Jitter.Collision.Shapes.SphereShape(0.05f));
//anchorBody.Position = new Jitter.LinearMath.JVector(0, 4, 0);
//world.AddBody(anchorBody);
//anchorBody.IsStatic = true;
//for (var bodyCount = -3; bodyCount < 4; bodyCount++)
//{
// var testBody = new Jitter.Dynamics.RigidBody(new Jitter.Collision.Shapes.SphereShape(0.501f));
// testBody.Position = new Jitter.LinearMath.JVector(bodyCount, 0, 0);
// world.AddBody(testBody);
// world.AddConstraint(new Jitter.Dynamics.Constraints.PointPointDistance(box, testBody,
// testBody.Position + Jitter.LinearMath.JVector.Up * 8f + Jitter.LinearMath.JVector.Forward * 3f + Jitter.LinearMath.JVector.Down * 0.5f,
// testBody.Position) { Softness = 1.0f, BiasFactor = 0.8f });
// world.AddConstraint(new Jitter.Dynamics.Constraints.PointPointDistance(box, testBody,
// testBody.Position + Jitter.LinearMath.JVector.Up * 8f + Jitter.LinearMath.JVector.Backward * 3f + Jitter.LinearMath.JVector.Down * 0.5f,
// testBody.Position) { Softness = 1.0f, BiasFactor = 0.8f });
// testBody.Material.Restitution = 1.0f;
// testBody.Material.StaticFriction = 1.0f;
//}
#endregion
// Initialize the world matrix
var worldMatrix = Matrix.Identity;
// Set the camera position slightly behind (z)
var cameraPosition = new Vector3(0, 1, 10);
var cameraTarget = Vector3.Zero; // Looking at the origin 0,0,0
var cameraUp = Vector3.UnitY; // Y+ is Up
// Prepare matrices
// Create the view matrix from our camera position, look target and up direction
var viewMatrix = Matrix.LookAtRH(cameraPosition, cameraTarget, cameraUp);
viewMatrix.TranslationVector += new Vector3(0, -0.98f, 0);
// Create the projection matrix
/* FoV 60degrees = Pi/3 radians */
// Aspect ratio (based on window size), Near clip, Far clip
var projectionMatrix = Matrix.PerspectiveFovRH((float)Math.PI / 3f, Width / (float)Height, 0.1f, 100f);
// Maintain the correct aspect ratio on resize
Window.Resize += (s, e) =>
{
projectionMatrix = Matrix.PerspectiveFovRH((float)Math.PI / 3f, Width / (float)Height, 0.1f, 100f);
};
bool debugDraw = false;
bool paused = false;
var simTime = new System.Diagnostics.Stopwatch();
simTime.Start();
float time = 0.0f;
float timeStep = 0.0f;
#region Rotation and window event handlers
// Create a rotation vector to keep track of the rotation
// around each of the axes
var rotation = new Vector3(0.0f, 0.0f, 0.0f);
// We will call this action to update text
// for the text renderer
Action updateText = () =>
{
textRenderer.Text =
String.Format("Rotation ({0}) (Up/Down Left/Right Wheel+-)\nView ({1}) (A/D, W/S, Shift+Wheel+-)"
//+ "\nPress 1,2,3,4,5,6,7,8 to switch shaders"
+ "\nTime: {2:0.00} (P to toggle, R to reset scene)"
+ "\nPhysics debug draw: {3} (E to toggle)"
+ "\nBackspace: toggle between Physics and Waves",
rotation,
viewMatrix.TranslationVector,
simTime.Elapsed.TotalSeconds,
debugDraw);
};
Dictionary <Keys, bool> keyToggles = new Dictionary <Keys, bool>();
keyToggles[Keys.Z] = false;
keyToggles[Keys.F] = false;
keyToggles[Keys.Back] = false;
// Support keyboard/mouse input to rotate or move camera view
var moveFactor = 0.02f; // how much to change on each keypress
var shiftKey = false;
var ctrlKey = false;
var background = Color.White;
var showNormals = false;
var enableNormalMap = true;
Window.KeyDown += (s, e) =>
{
var context = DeviceManager.Direct3DContext;
shiftKey = e.Shift;
ctrlKey = e.Control;
switch (e.KeyCode)
{
// WASD -> pans view
case Keys.A:
viewMatrix.TranslationVector += new Vector3(moveFactor * 2, 0f, 0f);
break;
case Keys.D:
viewMatrix.TranslationVector -= new Vector3(moveFactor * 2, 0f, 0f);
break;
case Keys.S:
if (shiftKey)
{
viewMatrix.TranslationVector += new Vector3(0f, moveFactor * 2, 0f);
}
else
{
viewMatrix.TranslationVector -= new Vector3(0f, 0f, 1) * moveFactor * 2;
}
break;
case Keys.W:
if (shiftKey)
{
viewMatrix.TranslationVector -= new Vector3(0f, moveFactor * 2, 0f);
}
else
{
viewMatrix.TranslationVector += new Vector3(0f, 0f, 1) * moveFactor * 2;
}
break;
// Up/Down and Left/Right - rotates around X / Y respectively
// (Mouse wheel rotates around Z)
case Keys.Down:
worldMatrix *= Matrix.RotationX(moveFactor);
rotation += new Vector3(moveFactor, 0f, 0f);
break;
case Keys.Up:
worldMatrix *= Matrix.RotationX(-moveFactor);
rotation -= new Vector3(moveFactor, 0f, 0f);
break;
case Keys.Left:
worldMatrix *= Matrix.RotationY(moveFactor);
rotation += new Vector3(0f, moveFactor, 0f);
break;
case Keys.Right:
worldMatrix *= Matrix.RotationY(-moveFactor);
rotation -= new Vector3(0f, moveFactor, 0f);
break;
case Keys.T:
fps.Show = !fps.Show;
textRenderer.Show = !textRenderer.Show;
break;
case Keys.B:
if (background == Color.White)
{
background = new Color(30, 30, 34);
}
else
{
background = Color.White;
}
break;
case Keys.G:
axisGrid.Show = !axisGrid.Show;
break;
case Keys.P:
paused = !paused;
if (paused)
{
simTime.Stop();
}
else
{
simTime.Start();
}
// Pause or resume mesh animation
meshes.ForEach(m => {
if (m.Clock.IsRunning)
{
m.Clock.Stop();
}
else
{
m.Clock.Start();
}
});
updateText();
break;
case Keys.X:
// To test for correct resource recreation
// Simulate device reset or lost.
System.Diagnostics.Debug.WriteLine(SharpDX.Diagnostics.ObjectTracker.ReportActiveObjects());
DeviceManager.Initialize(DeviceManager.Dpi);
System.Diagnostics.Debug.WriteLine(SharpDX.Diagnostics.ObjectTracker.ReportActiveObjects());
break;
case Keys.Z:
keyToggles[Keys.Z] = !keyToggles[Keys.Z];
if (keyToggles[Keys.Z])
{
context.PixelShader.Set(depthPixelShader);
}
else
{
context.PixelShader.Set(pixelShader);
}
break;
case Keys.F:
keyToggles[Keys.F] = !keyToggles[Keys.F];
RasterizerStateDescription rasterDesc;
if (context.Rasterizer.State != null)
{
rasterDesc = context.Rasterizer.State.Description;
}
else
{
rasterDesc = new RasterizerStateDescription()
{
CullMode = CullMode.None,
FillMode = FillMode.Solid
}
};
if (keyToggles[Keys.F])
{
rasterDesc.FillMode = FillMode.Wireframe;
context.Rasterizer.State = ToDispose(new RasterizerState(context.Device, rasterDesc));
}
else
{
rasterDesc.FillMode = FillMode.Solid;
context.Rasterizer.State = ToDispose(new RasterizerState(context.Device, rasterDesc));
}
break;
case Keys.N:
if (!shiftKey)
{
showNormals = !showNormals;
}
else
{
enableNormalMap = !enableNormalMap;
}
break;
case Keys.E:
debugDraw = !debugDraw;
break;
case Keys.R:
//world = new Jitter.World(new Jitter.Collision.CollisionSystemSAP());
initializePhysics();
if (simTime.IsRunning)
{
simTime.Restart();
}
else
{
simTime.Reset();
}
break;
case Keys.D1:
context.PixelShader.Set(pixelShader);
break;
case Keys.D2:
context.PixelShader.Set(lambertShader);
break;
case Keys.D3:
context.PixelShader.Set(phongShader);
break;
case Keys.D4:
context.PixelShader.Set(blinnPhongShader);
break;
case Keys.Back:
keyToggles[Keys.Back] = !keyToggles[Keys.Back];
break;
}
updateText();
};
Window.KeyUp += (s, e) =>
{
// Clear the shift/ctrl keys so they aren't sticky
if (e.KeyCode == Keys.ShiftKey)
{
shiftKey = false;
}
if (e.KeyCode == Keys.ControlKey)
{
ctrlKey = false;
}
};
Window.MouseWheel += (s, e) =>
{
if (shiftKey)
{
// Zoom in/out
viewMatrix.TranslationVector += new Vector3(0f, 0f, (e.Delta / 120f) * moveFactor * 2);
}
else
{
// rotate around Z-axis
viewMatrix *= Matrix.RotationZ((e.Delta / 120f) * moveFactor);
rotation += new Vector3(0f, 0f, (e.Delta / 120f) * moveFactor);
}
updateText();
};
var lastX = 0;
var lastY = 0;
Window.MouseDown += (s, e) =>
{
if (e.Button == MouseButtons.Left)
{
lastX = e.X;
lastY = e.Y;
}
};
Window.MouseMove += (s, e) =>
{
if (e.Button == MouseButtons.Left)
{
var yRotate = lastX - e.X;
var xRotate = lastY - e.Y;
lastY = e.Y;
lastX = e.X;
// Mouse move changes
viewMatrix *= Matrix.RotationX(-xRotate * moveFactor);
viewMatrix *= Matrix.RotationY(-yRotate * moveFactor);
updateText();
}
};
// Display instructions with initial values
updateText();
#endregion
var clock = new System.Diagnostics.Stopwatch();
clock.Start();
#region Render loop
// Create and run the render loop
RenderLoop.Run(Window, () =>
{
// Update simulation, at 60fps
if (!paused)
{
if ((float)simTime.Elapsed.TotalSeconds < time)
{
time = 0;
timeStep = 0;
}
timeStep = ((float)simTime.Elapsed.TotalSeconds - time);
time = (float)simTime.Elapsed.TotalSeconds;
world.StepSimulation(timeStep, 7);
// For how to choose the maxSubSteps see:
// http://www.bulletphysics.org/mediawiki-1.5.8/index.php/Stepping_The_World
}
updateText();
// Start of frame:
// Retrieve immediate context
var context = DeviceManager.Direct3DContext;
// Clear depth stencil view
context.ClearDepthStencilView(DepthStencilView, DepthStencilClearFlags.Depth | DepthStencilClearFlags.Stencil, 1.0f, 0);
// Clear render target view
context.ClearRenderTargetView(RenderTargetView, background);
// Create viewProjection matrix
var viewProjection = Matrix.Multiply(viewMatrix, projectionMatrix);
// Extract camera position from view
var camPosition = Matrix.Transpose(Matrix.Invert(viewMatrix)).Column4;
cameraPosition = new Vector3(camPosition.X, camPosition.Y, camPosition.Z);
var perFrame = new ConstantBuffers.PerFrame();
perFrame.Light.Color = new Color(0.8f, 0.8f, 0.8f, 1.0f);
var lightDir = Vector3.Transform(new Vector3(1f, -1f, -1f), worldMatrix);
perFrame.Light.Direction = new Vector3(lightDir.X, lightDir.Y, lightDir.Z);
perFrame.CameraPosition = cameraPosition;
perFrame.Time = (float)simTime.Elapsed.TotalSeconds; // Provide simulation time to shader
context.UpdateSubresource(ref perFrame, perFrameBuffer);
// Render each object
var perMaterial = new ConstantBuffers.PerMaterial();
perMaterial.Ambient = new Color4(0.2f);
perMaterial.Diffuse = Color.White;
perMaterial.Emissive = new Color4(0);
perMaterial.Specular = Color.White;
perMaterial.SpecularPower = 20f;
perMaterial.HasTexture = 0;
perMaterial.UVTransform = Matrix.Identity;
context.UpdateSubresource(ref perMaterial, perMaterialBuffer);
var perObject = new ConstantBuffers.PerObject();
// MESH
if (!keyToggles[Keys.Back])
{
meshes.ForEach((m) =>
{
perObject.World = m.World * worldMatrix;
// Provide the material constant buffer to the mesh renderer
perObject.WorldInverseTranspose = Matrix.Transpose(Matrix.Invert(perObject.World));
perObject.WorldViewProjection = perObject.World * viewProjection;
perObject.ViewProjection = viewProjection;
perObject.Transpose();
context.UpdateSubresource(ref perObject, perObjectBuffer);
m.PerMaterialBuffer = perMaterialBuffer;
m.PerArmatureBuffer = perArmatureBuffer;
m.Render();
if (showNormals)
{
using (var prevPixelShader = context.PixelShader.Get())
{
perMaterial.HasTexture = 0;
perMaterial.UVTransform = Matrix.Identity;
context.UpdateSubresource(ref perMaterial, perMaterialBuffer);
context.PixelShader.Set(pixelShader);
context.GeometryShader.Set(debugNormals);
m.Render();
context.PixelShader.Set(prevPixelShader);
context.GeometryShader.Set(null);
}
}
});
if (debugDraw)
{
perObject.World = Matrix.Identity;
perObject.WorldInverseTranspose = Matrix.Transpose(Matrix.Invert(perObject.World));
perObject.WorldViewProjection = perObject.World * viewProjection;
perObject.ViewProjection = viewProjection;
perObject.Transpose();
context.UpdateSubresource(ref perObject, perObjectBuffer);
(world.DebugDrawer as PhysicsDebugDraw).DrawDebugWorld(world);
context.VertexShader.Set(vertexShader);
context.PixelShader.Set(pixelShader);
context.InputAssembler.InputLayout = vertexLayout;
}
}
else
{
perObject.World = waterMesh.World * worldMatrix;
perObject.WorldInverseTranspose = Matrix.Transpose(Matrix.Invert(perObject.World));
perObject.WorldViewProjection = perObject.World * viewProjection;
perObject.ViewProjection = viewProjection;
perObject.Transpose();
context.UpdateSubresource(ref perObject, perObjectBuffer);
waterMesh.EnableNormalMap = enableNormalMap;
waterMesh.PerMaterialBuffer = perMaterialBuffer;
waterMesh.PerArmatureBuffer = perArmatureBuffer;
context.VertexShader.Set(waterVertexShader);
waterMesh.Render();
if (showNormals)
{
using (var prevPixelShader = context.PixelShader.Get())
{
perMaterial.HasTexture = 0;
perMaterial.UVTransform = Matrix.Identity;
context.UpdateSubresource(ref perMaterial, perMaterialBuffer);
context.PixelShader.Set(pixelShader);
context.GeometryShader.Set(debugNormals);
waterMesh.Render();
context.PixelShader.Set(prevPixelShader);
context.GeometryShader.Set(null);
}
}
context.VertexShader.Set(vertexShader);
foreach (var m in shipMeshes)
{
perObject.World = m.World * worldMatrix;
perObject.WorldInverseTranspose = Matrix.Transpose(Matrix.Invert(perObject.World));
perObject.WorldViewProjection = perObject.World * viewProjection;
perObject.Transpose();
context.UpdateSubresource(ref perObject, perObjectBuffer);
// Provide the material constant buffer to the mesh renderer
perObject.WorldInverseTranspose = Matrix.Transpose(Matrix.Invert(perObject.World));
perObject.WorldViewProjection = perObject.World * viewProjection;
perObject.ViewProjection = viewProjection;
perObject.Transpose();
context.UpdateSubresource(ref perObject, perObjectBuffer);
m.PerMaterialBuffer = perMaterialBuffer;
m.PerArmatureBuffer = perArmatureBuffer;
m.Render();
if (showNormals)
{
using (var prevPixelShader = context.PixelShader.Get())
{
perMaterial.HasTexture = 0;
perMaterial.UVTransform = Matrix.Identity;
context.UpdateSubresource(ref perMaterial, perMaterialBuffer);
context.PixelShader.Set(pixelShader);
context.GeometryShader.Set(debugNormals);
m.Render();
context.PixelShader.Set(prevPixelShader);
context.GeometryShader.Set(null);
}
}
}
}
perMaterial.Ambient = new Color4(0.2f);
perMaterial.Diffuse = Color.White;
perMaterial.Emissive = new Color4(0);
perMaterial.Specular = Color.White;
perMaterial.SpecularPower = 20f;
perMaterial.UVTransform = Matrix.Identity;
context.UpdateSubresource(ref perMaterial, perMaterialBuffer);
// AXIS GRID
context.HullShader.Set(null);
context.DomainShader.Set(null);
context.GeometryShader.Set(null);
using (var prevPixelShader = context.PixelShader.Get())
using (var prevVertexShader = context.VertexShader.Get())
{
context.VertexShader.Set(vertexShader);
context.PixelShader.Set(pixelShader);
perObject.World = worldMatrix;
perObject.WorldInverseTranspose = Matrix.Transpose(Matrix.Invert(perObject.World));
perObject.WorldViewProjection = perObject.World * viewProjection;
perObject.ViewProjection = viewProjection;
perObject.Transpose();
context.UpdateSubresource(ref perObject, perObjectBuffer);
axisGrid.Render();
context.PixelShader.Set(prevPixelShader);
context.VertexShader.Set(prevVertexShader);
}
// Render FPS
fps.Render();
// Render instructions + position changes
textRenderer.Render();
// Present the frame
Present();
});
#endregion
}
protected override void OnInitializePhysics()
{
ManifoldPoint.ContactAdded += MyContactCallback;
SetupEmptyDynamicsWorld();
WavefrontObj wo = new WavefrontObj();
int tcount = wo.LoadObj("data/file.obj");
if (tcount > 0)
{
TriangleMesh trimesh = new TriangleMesh();
trimeshes.Add(trimesh);
Vector3 localScaling = new Vector3(6, 6, 6);
List<int> indices = wo.Indices;
List<Vector3> vertices = wo.Vertices;
int i;
for (i = 0; i < tcount; i++)
{
int index0 = indices[i * 3];
int index1 = indices[i * 3 + 1];
int index2 = indices[i * 3 + 2];
Vector3 vertex0 = vertices[index0] * localScaling;
Vector3 vertex1 = vertices[index1] * localScaling;
Vector3 vertex2 = vertices[index2] * localScaling;
trimesh.AddTriangle(vertex0, vertex1, vertex2);
}
ConvexShape tmpConvexShape = new ConvexTriangleMeshShape(trimesh);
//create a hull approximation
ShapeHull hull = new ShapeHull(tmpConvexShape);
float margin = tmpConvexShape.Margin;
hull.BuildHull(margin);
tmpConvexShape.UserObject = hull;
ConvexHullShape convexShape = new ConvexHullShape();
foreach (Vector3 v in hull.Vertices)
{
convexShape.AddPoint(v);
}
if (sEnableSAT)
{
convexShape.InitializePolyhedralFeatures();
}
tmpConvexShape.Dispose();
//hull.Dispose();
CollisionShapes.Add(convexShape);
float mass = 1.0f;
LocalCreateRigidBody(mass, Matrix.Translation(0, 2, 14), convexShape);
const bool useQuantization = true;
CollisionShape concaveShape = new BvhTriangleMeshShape(trimesh, useQuantization);
LocalCreateRigidBody(0, Matrix.Translation(convexDecompositionObjectOffset), concaveShape);
CollisionShapes.Add(concaveShape);
// Bullet Convex Decomposition
FileStream outputFile = new FileStream("file_convex.obj", FileMode.Create, FileAccess.Write);
StreamWriter writer = new StreamWriter(outputFile);
DecompDesc desc = new DecompDesc
{
mVertices = wo.Vertices.ToArray(),
mTcount = tcount,
mIndices = wo.Indices.ToArray(),
mDepth = 5,
mCpercent = 5,
mPpercent = 15,
mMaxVertices = 16,
mSkinWidth = 0.0f
};
MyConvexDecomposition convexDecomposition = new MyConvexDecomposition(writer, this);
desc.mCallback = convexDecomposition;
// HACD
Hacd myHACD = new Hacd();
myHACD.SetPoints(wo.Vertices);
myHACD.SetTriangles(wo.Indices);
myHACD.CompacityWeight = 0.1;
myHACD.VolumeWeight = 0.0;
// HACD parameters
// Recommended parameters: 2 100 0 0 0 0
int nClusters = 2;
const double concavity = 100;
//bool invert = false;
const bool addExtraDistPoints = false;
const bool addNeighboursDistPoints = false;
const bool addFacesPoints = false;
myHACD.NClusters = nClusters; // minimum number of clusters
myHACD.VerticesPerConvexHull = 100; // max of 100 vertices per convex-hull
myHACD.Concavity = concavity; // maximum concavity
myHACD.AddExtraDistPoints = addExtraDistPoints;
myHACD.AddNeighboursDistPoints = addNeighboursDistPoints;
myHACD.AddFacesPoints = addFacesPoints;
myHACD.Compute();
nClusters = myHACD.NClusters;
myHACD.Save("output.wrl", false);
if (true)
{
CompoundShape compound = new CompoundShape();
CollisionShapes.Add(compound);
Matrix trans = Matrix.Identity;
for (int c = 0; c < nClusters; c++)
{
//generate convex result
Vector3[] points;
int[] triangles;
myHACD.GetCH(c, out points, out triangles);
ConvexResult r = new ConvexResult(points, triangles);
convexDecomposition.ConvexDecompResult(r);
}
for (i = 0; i < convexDecomposition.convexShapes.Count; i++)
{
Vector3 centroid = convexDecomposition.convexCentroids[i];
trans = Matrix.Translation(centroid);
ConvexHullShape convexShape2 = convexDecomposition.convexShapes[i] as ConvexHullShape;
compound.AddChildShape(trans, convexShape2);
RigidBody body = LocalCreateRigidBody(1.0f, trans, convexShape2);
}
#if true
mass = 10.0f;
trans = Matrix.Translation(-convexDecompositionObjectOffset);
RigidBody body2 = LocalCreateRigidBody(mass, trans, compound);
body2.CollisionFlags |= CollisionFlags.CustomMaterialCallback;
convexDecompositionObjectOffset.Z = 6;
trans = Matrix.Translation(-convexDecompositionObjectOffset);
body2 = LocalCreateRigidBody(mass, trans, compound);
body2.CollisionFlags |= CollisionFlags.CustomMaterialCallback;
convexDecompositionObjectOffset.Z = -6;
trans = Matrix.Translation(-convexDecompositionObjectOffset);
body2 = LocalCreateRigidBody(mass, trans, compound);
body2.CollisionFlags |= CollisionFlags.CustomMaterialCallback;
#endif
}
writer.Dispose();
outputFile.Dispose();
}
}
protected override void OnInitializePhysics()
{
ManifoldPoint.ContactAdded += MyContactCallback;
SetupEmptyDynamicsWorld();
CompoundCollisionAlgorithm.CompoundChildShapePairCallback = MyCompoundChildShapeCallback;
convexDecompositionObjectOffset = new Vector3(10, 0, 0);
// Load wavefront file
var wo = new WavefrontObj();
int tcount = wo.LoadObj("data/file.obj");
if (tcount == 0)
{
return;
}
// Convert file data to TriangleMesh
var trimesh = new TriangleMesh();
trimeshes.Add(trimesh);
Vector3 localScaling = new Vector3(6, 6, 6);
List<int> indices = wo.Indices;
List<Vector3> vertices = wo.Vertices;
int i;
for (i = 0; i < tcount; i++)
{
int index0 = indices[i * 3];
int index1 = indices[i * 3 + 1];
int index2 = indices[i * 3 + 2];
Vector3 vertex0 = vertices[index0] * localScaling;
Vector3 vertex1 = vertices[index1] * localScaling;
Vector3 vertex2 = vertices[index2] * localScaling;
trimesh.AddTriangleRef(ref vertex0, ref vertex1, ref vertex2);
}
// Create a hull approximation
ConvexHullShape convexShape;
using (var tmpConvexShape = new ConvexTriangleMeshShape(trimesh))
{
using (var hull = new ShapeHull(tmpConvexShape))
{
hull.BuildHull(tmpConvexShape.Margin);
convexShape = new ConvexHullShape(hull.Vertices);
}
}
if (sEnableSAT)
{
convexShape.InitializePolyhedralFeatures();
}
CollisionShapes.Add(convexShape);
// Add non-moving body to world
float mass = 1.0f;
LocalCreateRigidBody(mass, Matrix.Translation(0, 2, 14), convexShape);
const bool useQuantization = true;
var concaveShape = new BvhTriangleMeshShape(trimesh, useQuantization);
LocalCreateRigidBody(0, Matrix.Translation(convexDecompositionObjectOffset), concaveShape);
CollisionShapes.Add(concaveShape);
// HACD
var hacd = new Hacd();
hacd.SetPoints(wo.Vertices);
hacd.SetTriangles(wo.Indices);
hacd.CompacityWeight = 0.1;
hacd.VolumeWeight = 0.0;
// Recommended HACD parameters: 2 100 false false false
hacd.NClusters = 2; // minimum number of clusters
hacd.Concavity = 100; // maximum concavity
hacd.AddExtraDistPoints = false;
hacd.AddNeighboursDistPoints = false;
hacd.AddFacesPoints = false;
hacd.NumVerticesPerConvexHull = 100; // max of 100 vertices per convex-hull
hacd.Compute();
hacd.Save("output.wrl", false);
// Generate convex result
var outputFile = new FileStream("file_convex.obj", FileMode.Create, FileAccess.Write);
var writer = new StreamWriter(outputFile);
var convexDecomposition = new ConvexDecomposition(writer, this);
convexDecomposition.LocalScaling = localScaling;
for (int c = 0; c < hacd.NClusters; c++)
{
Vector3[] points;
int[] triangles;
hacd.GetCH(c, out points, out triangles);
convexDecomposition.ConvexDecompResult(points, triangles);
}
// Combine convex shapes into a compound shape
var compound = new CompoundShape();
for (i = 0; i < convexDecomposition.convexShapes.Count; i++)
{
Vector3 centroid = convexDecomposition.convexCentroids[i];
var convexShape2 = convexDecomposition.convexShapes[i];
Matrix trans = Matrix.Translation(centroid);
if (sEnableSAT)
{
convexShape2.InitializePolyhedralFeatures();
}
CollisionShapes.Add(convexShape2);
compound.AddChildShape(trans, convexShape2);
LocalCreateRigidBody(1.0f, trans, convexShape2);
}
CollisionShapes.Add(compound);
writer.Dispose();
outputFile.Dispose();
#if true
mass = 10.0f;
var body2 = LocalCreateRigidBody(mass, Matrix.Translation(-convexDecompositionObjectOffset), compound);
body2.CollisionFlags |= CollisionFlags.CustomMaterialCallback;
convexDecompositionObjectOffset.Z = 6;
body2 = LocalCreateRigidBody(mass, Matrix.Translation(-convexDecompositionObjectOffset), compound);
body2.CollisionFlags |= CollisionFlags.CustomMaterialCallback;
convexDecompositionObjectOffset.Z = -6;
body2 = LocalCreateRigidBody(mass, Matrix.Translation(-convexDecompositionObjectOffset), compound);
body2.CollisionFlags |= CollisionFlags.CustomMaterialCallback;
#endif
}
public BvhTriangleMeshShape GetAccurateCollisionShape(float scale = 1.0f)
{
//if (CachedBvhTriangleMeshShape != null) return CachedBvhTriangleMeshShape;
List<Vector3> vectors = GetOrderedVertices();
var smesh = new TriangleIndexVertexArray(GetOrderedIndices().ToArray(), vectors.ToArray());
CachedBvhTriangleMeshShape = new BvhTriangleMeshShape(smesh, false);
//CachedBvhTriangleMeshShape.LocalScaling = new Vector3(scale);
return CachedBvhTriangleMeshShape;
}
public BvhTriangleMeshShape GetAccurateCollisionShape()
{
//if (CachedBvhTriangleMeshShape != null) return CachedBvhTriangleMeshShape;
List<Vector3> vectors = GetRawVertexList();
var smesh = new TriangleIndexVertexArray(Enumerable.Range(0, Vertices.Count).ToArray(), vectors.Select((a) => a).ToArray());
CachedBvhTriangleMeshShape = new BvhTriangleMeshShape(smesh, false);
//CachedBvhTriangleMeshShape.LocalScaling = new Vector3(scale);
return CachedBvhTriangleMeshShape;
}
protected override CollisionShape CreateShape()
{
//ConvexHullShape shape = new ConvexHullShape(this.vertices);
//BvhTriangleMeshShape bvh = new BvhTriangleMeshShape(
//StridingMeshInterface smi = new StridingMeshInterface();
TriangleIndexVertexArray tiv = new TriangleIndexVertexArray(this.indices, this.vertices);
BvhTriangleMeshShape bvh = new BvhTriangleMeshShape(tiv, true, true);
//StridingMeshInterface
return bvh;
}
public Physics()
{
ManifoldPoint.ContactAdded += CustomMaterialCombinerCallback;
// collision configuration contains default setup for memory, collision setup
CollisionConf = new DefaultCollisionConfiguration();
Dispatcher = new CollisionDispatcher(CollisionConf);
Broadphase = new AxisSweep3(new Vector3(-10000, -10000, -10000), new Vector3(10000, 10000, 10000));
Solver = new SequentialImpulseConstraintSolver();
World = new DiscreteDynamicsWorld(Dispatcher, Broadphase, Solver, CollisionConf);
World.Gravity = new Vector3(0, -10, 0);
const int totalVerts = NumVertsX * NumVertsY;
const int totalTriangles = 2 * (NumVertsX - 1) * (NumVertsY - 1);
gVertices = new Vector3[totalVerts];
int[] gIndices = new int[totalTriangles * 3];
BulletMaterial[] gMaterials = new BulletMaterial[2];
int[] gFaceMaterialIndices = new int[totalTriangles];
// Explicitly set up the materials. It's a small array so let's do it bit by bit.
gMaterials[0].Friction = 0;
gMaterials[0].Restitution = 0.9f;
gMaterials[1].Friction = 0.9f;
gMaterials[1].Restitution = 0.1f;
int i;
// Set up the vertex data
SetVertexPositions(waveheight, 0.0f);
int index = 0;
// Set up the face data
for (i = 0; i < NumVertsX - 1; i++)
{
for (int j = 0; j < NumVertsY - 1; j++)
{
gIndices[index++] = j * NumVertsX + i;
gIndices[index++] = j * NumVertsX + i + 1;
gIndices[index++] = (j + 1) * NumVertsX + i + 1;
gIndices[index++] = j * NumVertsX + i;
gIndices[index++] = (j + 1) * NumVertsX + i + 1;
gIndices[index++] = (j + 1) * NumVertsX + i;
}
}
// Set up the face->material index data
for (int a = 0; a < totalTriangles; a++)
{
// This will give the first half of the faces low friction and high restitution
// and the second half of the faces high friction and low restitution
if (a > totalTriangles / 2)
gFaceMaterialIndices[a] = 0;
else
gFaceMaterialIndices[a] = 1;
}
// Create the array structure
TriangleIndexVertexMaterialArray indexVertexArrays = new TriangleIndexVertexMaterialArray(
gIndices, gVertices, gMaterials, gFaceMaterialIndices);
// Create the multimaterial mesh shape
trimeshShape = new MultimaterialTriangleMeshShape(indexVertexArrays, true);
CollisionShapes.Add(trimeshShape);
// create the ground
//CollisionShape groundShape = new BoxShape(50, 1, 50);
//CollisionShapes.PushBack(groundShape);
CollisionObject ground = LocalCreateRigidBody(0, Matrix.Identity, trimeshShape);
ground.UserObject = "Ground";
ground.CollisionFlags |= CollisionFlags.StaticObject | CollisionFlags.CustomMaterialCallback;
CollisionShape colShape = new BoxShape(0.5f);
CollisionShapes.Add(colShape);
for (i = 0; i < 12; i++)
{
RigidBody body = LocalCreateRigidBody(1, Matrix.Translation(10 - i, 10, -20 + i * 3), colShape);
body.CollisionFlags |= CollisionFlags.CustomMaterialCallback;
body.Friction = 0.9f;
body.Gravity = new Vector3(0, -20, 0);
body.ApplyCentralImpulse(new Vector3(-7.7f, 0, 0));
}
}
public ScaledBvhTriangleMeshShape(BvhTriangleMeshShape childShape, Vector3 localScaling)
: base(btScaledBvhTriangleMeshShape_new(childShape.Native, ref localScaling))
{
ChildShape = childShape;
}
/// <summary>
/// Gets a collision shape from a .bullet file.
/// </summary>
/// <param name="filename">The full filename, <u>including extension</u></param>
/// <param name="ent">If the .bullet file does not exist, this is the entity we should use to generate it</param>
/// <param name="node">If the .bullet file does not exist, this is the node we will use to get info from when generating it</param>
/// <returns></returns>
public CollisionShape GetShapeFromFile(string filename, Entity ent, SceneNode node)
{
CollisionShape shape;
if (!Shapes.TryGetValue(filename, out shape)) {
// check to see if the .bullet file exists
string bulletfile = GetBulletFile(filename);
if (bulletfile != null) {
// if it does not, import it (make sure we get rid of the extension first)
shape = ImportCollisionShape(Path.GetFileNameWithoutExtension(bulletfile));
}
else {
Launch.Log("[PhysicsMain] " + filename + " does not exist, converting Ogre mesh into physics trimesh and exporting new .bullet file...");
// it does not have a file, so we need to convert our ogre mesh
shape = new BvhTriangleMeshShape(OgreToBulletMesh.Convert(ent, node), true, true);
(shape as BvhTriangleMeshShape).BuildOptimizedBvh();
// and then export it as a .bullet file
SerializeShape(shape, node.Name);
}
// add the shape to the dictionary, including the .bullet extension
Shapes.Add(filename, shape);
}
return shape;
}
protected override void OnInitializePhysics()
{
// collision configuration contains default setup for memory, collision setup
CollisionConf = new DefaultCollisionConfiguration();
Dispatcher = new CollisionDispatcher(CollisionConf);
Vector3 worldMin = new Vector3(-1000, -1000, -1000);
Vector3 worldMax = new Vector3(1000, 1000, 1000);
Broadphase = new AxisSweep3(worldMin, worldMax);
Solver = new SequentialImpulseConstraintSolver();
World = new DiscreteDynamicsWorld(Dispatcher, Broadphase, Solver, CollisionConf);
World.SolverInfo.SplitImpulse = 1;
World.Gravity = new Vector3(0, -10, 0);
const int totalVerts = NumVertsX * NumVertsY;
const int totalTriangles = 2 * (NumVertsX - 1) * (NumVertsY - 1);
indexVertexArrays = new TriangleIndexVertexArray();
IndexedMesh mesh = new IndexedMesh();
mesh.NumTriangles = totalTriangles;
mesh.NumVertices = totalVerts;
mesh.TriangleIndexStride = 3 * sizeof(int);
mesh.VertexStride = Vector3.SizeInBytes;
mesh.TriangleIndexBase = Marshal.AllocHGlobal(mesh.TriangleIndexStride * totalTriangles);
mesh.VertexBase = Marshal.AllocHGlobal(mesh.VertexStride * totalVerts);
var indicesStream = mesh.GetTriangleStream();
using (var indices = new BinaryWriter(indicesStream))
{
for (int i = 0; i < NumVertsX - 1; i++)
{
for (int j = 0; j < NumVertsY - 1; j++)
{
indices.Write(j*NumVertsX + i);
indices.Write(j*NumVertsX + i + 1);
indices.Write((j + 1)*NumVertsX + i + 1);
indices.Write(j*NumVertsX + i);
indices.Write((j + 1)*NumVertsX + i + 1);
indices.Write((j + 1)*NumVertsX + i);
}
}
}
indexVertexArrays.AddIndexedMesh(mesh);
convexcastBatch = new ConvexcastBatch(40.0f, 0.0f, -10.0f, 80.0f);
CollisionShape colShape = new BoxShape(1);
CollisionShapes.Add(colShape);
for (int j = 0; j < NumDynamicBoxesX; j++)
{
for (int i = 0; i < NumDynamicBoxesY; i++)
{
//CollisionShape colShape = new CapsuleShape(0.5f,2.0f);//boxShape = new SphereShape(1.0f);
Matrix startTransform = Matrix.Translation(5 * (i - NumDynamicBoxesX / 2), 10, 5 * (j - NumDynamicBoxesY / 2));
LocalCreateRigidBody(1.0f, startTransform, colShape);
}
}
SetVertexPositions(WaveHeight, 0.0f);
const bool useQuantizedAabbCompression = true;
groundShape = new BvhTriangleMeshShape(indexVertexArrays, useQuantizedAabbCompression);
CollisionShapes.Add(groundShape);
staticBody = LocalCreateRigidBody(0.0f, Matrix.Identity, groundShape);
staticBody.CollisionFlags |= CollisionFlags.StaticObject;
staticBody.UserObject = "Ground";
}
public ScaledBvhTriangleMeshShape CreateScaledTriangleMeshShape(BvhTriangleMeshShape meshShape, ref Vector3 localScalingbtBvhTriangleMeshShape)
{
ScaledBvhTriangleMeshShape shape = new ScaledBvhTriangleMeshShape(meshShape, localScalingbtBvhTriangleMeshShape);
_allocatedCollisionShapes.Add(shape);
return shape;
}
static void TestGCCollection()
{
var conf = new DefaultCollisionConfiguration();
var dispatcher = new CollisionDispatcher(conf);
var broadphase = new DbvtBroadphase();
//var broadphase = new AxisSweep3(new Vector3(-1000, -1000, -1000), new Vector3(1000, 1000, 1000));
world = new DiscreteDynamicsWorld(dispatcher, broadphase, null, conf);
world.Gravity = new Vector3(0, -10, 0);
dispatcher.NearCallback = DispatcherNearCallback;
CreateBody(0.0f, new BoxShape(50, 1, 50), Vector3.Zero);
var dynamicObject = CreateBody(10.0f, new SphereShape(1.0f), new Vector3(2, 2, 0));
var dynamicObject2 = CreateBody(1.0f, new SphereShape(1.0f), new Vector3(0, 2, 0));
var ghostPairCallback = new GhostPairCallback();
broadphase.OverlappingPairCache.SetInternalGhostPairCallback(ghostPairCallback);
AddToDisposeQueue(ghostPairCallback);
ghostPairCallback = null;
var ghostObject = new PairCachingGhostObject();
ghostObject.CollisionShape = new BoxShape(2);
ghostObject.WorldTransform = Matrix.Translation(2,2,0);
world.AddCollisionObject(ghostObject);
var trimesh = new TriangleMesh();
Vector3 v0 = new Vector3(0, 0, 0);
Vector3 v1 = new Vector3(1, 0, 0);
Vector3 v2 = new Vector3(0, 1, 0);
Vector3 v3 = new Vector3(1, 1, 0);
trimesh.AddTriangle(v0, v1, v2);
trimesh.AddTriangle(v1, v3, v2);
var triangleMeshShape = new BvhTriangleMeshShape(trimesh, false);
var triMeshObject = CreateBody(0, triangleMeshShape, new Vector3(20,0,20));
AddToDisposeQueue(triangleMeshShape);
AddToDisposeQueue(trimesh);
AddToDisposeQueue(triMeshObject);
triangleMeshShape = null;
trimesh = null;
AddToDisposeQueue(conf);
AddToDisposeQueue(dispatcher);
AddToDisposeQueue(broadphase);
AddToDisposeQueue(world);
//conf.Dispose();
conf = null;
//dispatcher.Dispose();
dispatcher = null;
//broadphase.Dispose();
broadphase = null;
world.DebugDrawer = new DebugDrawTest();
AddToDisposeQueue(world.DebugDrawer);
world.SetInternalTickCallback(WorldPreTickCallback);
for (int i = 0; i < 600; i++)
{
world.StepSimulation(1.0f / 60.0f);
}
world.DispatchInfo.DebugDraw = new DebugDrawTest2();
AddToDisposeQueue(world.DispatchInfo.DebugDraw);
world.DispatchInfo.DebugDraw = world.DispatchInfo.DebugDraw;
AddToDisposeQueue(world.DispatchInfo.DebugDraw);
world.DispatchInfo.DebugDraw = null;
world.DebugDrawer = null;
world.DebugDrawer = new DebugDrawTest2();
world.StepSimulation(1.0f / 60.0f);
world.DebugDrawWorld();
AddToDisposeQueue(world.DispatchInfo.DebugDraw);
world.DebugDrawer = new DebugDrawTest();
world.DebugDrawWorld();
AddToDisposeQueue(world.DebugDrawer);
world.DebugDrawer = null;
TestContactTest(dynamicObject, dynamicObject2);
TestGhostObjectPairs(ghostObject);
TestRayCast(dynamicObject);
TestTriangleMeshRayCast(triMeshObject);
dynamicObject = null;
dynamicObject2 = null;
triMeshObject = null;
//world.SetInternalTickCallback(null);
world.Dispose();
world = null;
GC.Collect(GC.MaxGeneration, GCCollectionMode.Forced);
GC.WaitForPendingFinalizers();
TestWeakRefs();
disposeQueue.Clear();
}
public BvhTriangleMeshShape CreateBvhTriangleMeshShape(StridingMeshInterface trimesh, OptimizedBvh bvh)
{
BvhTriangleMeshShape shape;
if (bvh != null)
{
shape = new BvhTriangleMeshShape(trimesh, bvh.IsQuantized, false);
shape.OptimizedBvh = bvh;
}
else
{
shape = new BvhTriangleMeshShape(trimesh, true);
}
_allocatedCollisionShapes.Add(shape);
return shape;
}
protected override void OnInitializePhysics()
{
// collision configuration contains default setup for memory, collision setup
CollisionConf = new DefaultCollisionConfiguration();
Dispatcher = new CollisionDispatcher(CollisionConf);
Vector3 worldMin = new Vector3(-1000, -1000, -1000);
Vector3 worldMax = new Vector3(1000, 1000, 1000);
Broadphase = new AxisSweep3(worldMin, worldMax);
Solver = new SequentialImpulseConstraintSolver();
World = new DiscreteDynamicsWorld(Dispatcher, Broadphase, Solver, CollisionConf);
World.SolverInfo.SplitImpulse = 1;
World.Gravity = new Vector3(0, -10, 0);
IsDebugDrawEnabled = true;
CollisionShape colShape = new BoxShape(1);
CollisionShapes.Add(colShape);
for (int j = 0; j < NumDynamicBoxesX; j++)
{
for (int i = 0; i < NumDynamicBoxesY; i++)
{
//CollisionShape colShape = new CapsuleShape(0.5f,2.0f);//boxShape = new SphereShape(1.0f);
Matrix startTransform = Matrix.Translation(5 * (i - NumDynamicBoxesX / 2), 10, 5 * (j - NumDynamicBoxesY / 2));
LocalCreateRigidBody(1.0f, startTransform, colShape);
}
}
SetVertexPositions(WaveHeight, 0.0f);
const bool useQuantizedAabbCompression = true;
groundShape = new BvhTriangleMeshShape(indexVertexArrays, useQuantizedAabbCompression);
CollisionShapes.Add(groundShape);
staticBody = LocalCreateRigidBody(0.0f, Matrix.Identity, groundShape);
staticBody.CollisionFlags |= CollisionFlags.StaticObject;
staticBody.UserObject = "Ground";
}
protected override void OnInitializePhysics()
{
ManifoldPoint.ContactAdded += MyContactCallback;
SetupEmptyDynamicsWorld();
//CompoundCollisionAlgorithm.CompoundChildShapePairCallback = MyCompoundChildShapeCallback;
convexDecompositionObjectOffset = new Vector3(10, 0, 0);
// Load wavefront file
var wo = new WavefrontObj();
//string filename = UnityEngine.Application.dataPath + "/BulletUnity/Examples/Scripts/BulletSharpDemos/ConvexDecompositionDemo/data/file.obj";
UnityEngine.TextAsset bytes = (UnityEngine.TextAsset)UnityEngine.Resources.Load("file.obj");
System.IO.Stream byteStream = new System.IO.MemoryStream(bytes.bytes);
int tcount = wo.LoadObj(byteStream);
if (tcount == 0)
{
return;
}
// Convert file data to TriangleMesh
var trimesh = new TriangleMesh();
trimeshes.Add(trimesh);
Vector3 localScaling = new Vector3(6, 6, 6);
List<int> indices = wo.Indices;
List<Vector3> vertices = wo.Vertices;
int i;
for (i = 0; i < tcount; i++)
{
int index0 = indices[i * 3];
int index1 = indices[i * 3 + 1];
int index2 = indices[i * 3 + 2];
Vector3 vertex0 = vertices[index0] * localScaling;
Vector3 vertex1 = vertices[index1] * localScaling;
Vector3 vertex2 = vertices[index2] * localScaling;
trimesh.AddTriangleRef(ref vertex0, ref vertex1, ref vertex2);
}
// Create a hull approximation
ConvexHullShape convexShape;
using (var tmpConvexShape = new ConvexTriangleMeshShape(trimesh))
{
using (var hull = new ShapeHull(tmpConvexShape))
{
hull.BuildHull(tmpConvexShape.Margin);
convexShape = new ConvexHullShape(hull.Vertices);
}
}
if (sEnableSAT)
{
convexShape.InitializePolyhedralFeatures();
}
CollisionShapes.Add(convexShape);
// Add non-moving body to world
float mass = 1.0f;
LocalCreateRigidBody(mass, Matrix.Translation(0, 2, 14), convexShape);
const bool useQuantization = true;
var concaveShape = new BvhTriangleMeshShape(trimesh, useQuantization);
LocalCreateRigidBody(0, Matrix.Translation(convexDecompositionObjectOffset), concaveShape);
CollisionShapes.Add(concaveShape);
// HACD
var hacd = new Hacd();
hacd.SetPoints(wo.Vertices);
hacd.SetTriangles(wo.Indices);
hacd.CompacityWeight = 0.1;
hacd.VolumeWeight = 0.0;
// Recommended HACD parameters: 2 100 false false false
hacd.NClusters = 2; // minimum number of clusters
hacd.Concavity = 100; // maximum concavity
hacd.AddExtraDistPoints = false;
hacd.AddNeighboursDistPoints = false;
hacd.AddFacesPoints = false;
hacd.NVerticesPerCH = 100; // max of 100 vertices per convex-hull
hacd.Compute();
hacd.Save("output.wrl", false);
// Generate convex result
var outputFile = new FileStream("file_convex.obj", FileMode.Create, FileAccess.Write);
var writer = new StreamWriter(outputFile);
var convexDecomposition = new ConvexDecomposition(writer, this);
convexDecomposition.LocalScaling = localScaling;
for (int c = 0; c < hacd.NClusters; c++)
{
int nVertices = hacd.GetNPointsCH(c);
int trianglesLen = hacd.GetNTrianglesCH(c) * 3;
double[] points = new double[nVertices * 3];
long[] triangles = new long[trianglesLen];
hacd.GetCH(c, points, triangles);
if (trianglesLen == 0)
{
continue;
}
Vector3[] verticesArray = new Vector3[nVertices];
int vi3 = 0;
for (int vi = 0; vi < nVertices; vi++)
{
verticesArray[vi] = new Vector3(
(float)points[vi3], (float)points[vi3 + 1], (float)points[vi3 + 2]);
vi3 += 3;
}
int[] trianglesInt = new int[trianglesLen];
for (int ti = 0; ti < trianglesLen; ti++)
{
trianglesInt[ti] = (int)triangles[ti];
}
convexDecomposition.ConvexDecompResult(verticesArray, trianglesInt);
}
// Combine convex shapes into a compound shape
var compound = new CompoundShape();
for (i = 0; i < convexDecomposition.convexShapes.Count; i++)
{
Vector3 centroid = convexDecomposition.convexCentroids[i];
var convexShape2 = convexDecomposition.convexShapes[i];
Matrix trans = Matrix.Translation(centroid);
if (sEnableSAT)
{
convexShape2.InitializePolyhedralFeatures();
}
CollisionShapes.Add(convexShape2);
compound.AddChildShape(trans, convexShape2);
LocalCreateRigidBody(1.0f, trans, convexShape2);
}
CollisionShapes.Add(compound);
writer.Dispose();
outputFile.Dispose();
#if true
mass = 10.0f;
var body2 = LocalCreateRigidBody(mass, Matrix.Translation(-convexDecompositionObjectOffset), compound);
body2.CollisionFlags |= CollisionFlags.CustomMaterialCallback;
convexDecompositionObjectOffset.Z = 6;
body2 = LocalCreateRigidBody(mass, Matrix.Translation(-convexDecompositionObjectOffset), compound);
body2.CollisionFlags |= CollisionFlags.CustomMaterialCallback;
convexDecompositionObjectOffset.Z = -6;
body2 = LocalCreateRigidBody(mass, Matrix.Translation(-convexDecompositionObjectOffset), compound);
body2.CollisionFlags |= CollisionFlags.CustomMaterialCallback;
#endif
}
