/// <summary>
/// Creates a new front triangle and legalize it
/// </summary>
private static AdvancingFrontNode NewFrontTriangle( DTSweepContext tcx, TriangulationPoint point, AdvancingFrontNode node )
{
AdvancingFrontNode newNode;
DelaunayTriangle triangle;
triangle = new DelaunayTriangle(point, node.Point, node.Next.Point);
triangle.MarkNeighbor(node.Triangle);
tcx.Triangles.Add(triangle);
newNode = new AdvancingFrontNode(point) {Next = node.Next, Prev = node};
node.Next.Prev = newNode;
node.Next = newNode;
tcx.AddNode(newNode); // XXX: BST
if (tcx.IsDebugEnabled) tcx.DTDebugContext.ActiveNode = newNode;
if (!Legalize(tcx, triangle)) tcx.MapTriangleToNodes(triangle);
return newNode;
}
/// <summary>
/// Returns true if triangle was legalized
/// </summary>
private static bool Legalize( DTSweepContext tcx, DelaunayTriangle t )
{
// To legalize a triangle we start by finding if any of the three edges
// violate the Delaunay condition
for (int i = 0; i < 3; i++) {
// TODO: fix so that cEdge is always valid when creating new triangles then we can check it here
// instead of below with ot
if (t.EdgeIsDelaunay[i]) continue;
DelaunayTriangle ot = t.Neighbors[i];
if (ot == null) continue;
TriangulationPoint p = t.Points[i];
TriangulationPoint op = ot.OppositePoint(t, p);
int oi = ot.IndexOf(op);
// If this is a Constrained Edge or a Delaunay Edge(only during recursive legalization)
// then we should not try to legalize
if (ot.EdgeIsConstrained[oi] || ot.EdgeIsDelaunay[oi]) {
t.EdgeIsConstrained[i] = ot.EdgeIsConstrained[oi]; // XXX: have no good way of setting this property when creating new triangles so lets set it here
continue;
}
if (!TriangulationUtil.SmartIncircle(p,t.PointCCWFrom(p),t.PointCWFrom(p),op)) continue;
// Lets mark this shared edge as Delaunay
t.EdgeIsDelaunay[i] = true;
ot.EdgeIsDelaunay[oi] = true;
// Lets rotate shared edge one vertex CW to legalize it
RotateTrianglePair(t, p, ot, op);
// We now got one valid Delaunay Edge shared by two triangles
// This gives us 4 new edges to check for Delaunay
// Make sure that triangle to node mapping is done only one time for a specific triangle
if (!Legalize(tcx, t)) tcx.MapTriangleToNodes(t);
if (!Legalize(tcx, ot)) tcx.MapTriangleToNodes(ot);
// Reset the Delaunay edges, since they only are valid Delaunay edges
// until we add a new triangle or point.
// XXX: need to think about this. Can these edges be tried after we
// return to previous recursive level?
t.EdgeIsDelaunay[i] = false;
ot.EdgeIsDelaunay[oi] = false;
// If triangle have been legalized no need to check the other edges since
// the recursive legalization will handles those so we can end here.
return true;
}
return false;
}
/// <summary>
/// If this is a Delaunay Triangulation of a pointset we need to fill so the triangle mesh gets a ConvexHull
/// </summary>
private static void FinalizationConvexHull( DTSweepContext tcx )
{
AdvancingFrontNode n1, n2, n3;
DelaunayTriangle t1;
TriangulationPoint first, p1;
n1 = tcx.Front.Head.Next;
n2 = n1.Next;
n3 = n2.Next;
first = n1.Point;
TurnAdvancingFrontConvex(tcx, n1, n2);
n1 = tcx.Front.Tail.Prev;
if (n1.Triangle.Contains(n1.Next.Point) && n1.Triangle.Contains(n1.Prev.Point)) {
t1 = n1.Triangle.NeighborAcrossFrom(n1.Point);
RotateTrianglePair(n1.Triangle, n1.Point, t1, t1.OppositePoint(n1.Triangle, n1.Point));
tcx.MapTriangleToNodes(n1.Triangle);
tcx.MapTriangleToNodes(t1);
}
n1 = tcx.Front.Head.Next;
if (n1.Triangle.Contains(n1.Prev.Point) && n1.Triangle.Contains(n1.Next.Point)) {
t1 = n1.Triangle.NeighborAcrossFrom(n1.Point);
RotateTrianglePair(n1.Triangle, n1.Point, t1, t1.OppositePoint(n1.Triangle, n1.Point));
tcx.MapTriangleToNodes(n1.Triangle);
tcx.MapTriangleToNodes(t1);
}
// TODO: implement ConvexHull for lower right and left boundary
// Lower right boundary
first = tcx.Front.Head.Point;
n2 = tcx.Front.Tail.Prev;
t1 = n2.Triangle;
p1 = n2.Point;
do {
tcx.RemoveFromList(t1);
p1 = t1.PointCCWFrom(p1);
if (p1 == first) break;
t1 = t1.NeighborCCWFrom(p1);
} while (true);
// Lower left boundary
first = tcx.Front.Head.Next.Point;
p1 = t1.PointCWFrom(tcx.Front.Head.Point);
t1 = t1.NeighborCWFrom(tcx.Front.Head.Point);
do {
tcx.RemoveFromList(t1);
p1 = t1.PointCCWFrom(p1);
t1 = t1.NeighborCCWFrom(p1);
} while (p1 != first);
tcx.FinalizeTriangulation();
}
private static void FlipEdgeEvent( DTSweepContext tcx, TriangulationPoint ep, TriangulationPoint eq, DelaunayTriangle t, TriangulationPoint p )
{
DelaunayTriangle ot = t.NeighborAcrossFrom(p);
TriangulationPoint op = ot.OppositePoint(t, p);
if (ot == null) {
// If we want to integrate the fillEdgeEvent do it here
// With current implementation we should never get here
throw new InvalidOperationException("[BUG:FIXME] FLIP failed due to missing triangle");
}
if (tcx.IsDebugEnabled) {
tcx.DTDebugContext.PrimaryTriangle = t;
tcx.DTDebugContext.SecondaryTriangle = ot;
} // TODO: remove
bool inScanArea = TriangulationUtil.InScanArea(p, t.PointCCWFrom(p), t.PointCWFrom(p), op);
if (inScanArea) {
// Lets rotate shared edge one vertex CW
RotateTrianglePair(t, p, ot, op);
tcx.MapTriangleToNodes(t);
tcx.MapTriangleToNodes(ot);
if (p == eq && op == ep) {
if (eq == tcx.EdgeEvent.ConstrainedEdge.Q
&& ep == tcx.EdgeEvent.ConstrainedEdge.P) {
if (tcx.IsDebugEnabled) Console.WriteLine("[FLIP] - constrained edge done"); // TODO: remove
t.MarkConstrainedEdge(ep, eq);
ot.MarkConstrainedEdge(ep, eq);
Legalize(tcx, t);
Legalize(tcx, ot);
} else {
if (tcx.IsDebugEnabled) Console.WriteLine("[FLIP] - subedge done"); // TODO: remove
// XXX: I think one of the triangles should be legalized here?
}
} else {
if (tcx.IsDebugEnabled) Console.WriteLine("[FLIP] - flipping and continuing with triangle still crossing edge"); // TODO: remove
Orientation o = TriangulationUtil.Orient2d(eq, op, ep);
t = NextFlipTriangle(tcx, o, t, ot, p, op);
FlipEdgeEvent(tcx, ep, eq, t, p);
}
} else {
TriangulationPoint newP = NextFlipPoint(ep, eq, ot, op);
FlipScanEdgeEvent(tcx, ep, eq, t, ot, newP);
EdgeEvent(tcx, ep, eq, t, p);
}
}
/// <summary>
/// Adds a triangle to the advancing front to fill a hole.
/// </summary>
/// <param name="tcx"></param>
/// <param name="node">middle node, that is the bottom of the hole</param>
private static void Fill( DTSweepContext tcx, AdvancingFrontNode node )
{
DelaunayTriangle triangle = new DelaunayTriangle(node.Prev.Point, node.Point, node.Next.Point);
// TODO: should copy the cEdge value from neighbor triangles
// for now cEdge values are copied during the legalize
triangle.MarkNeighbor(node.Prev.Triangle);
triangle.MarkNeighbor(node.Triangle);
tcx.Triangles.Add(triangle);
// Update the advancing front
node.Prev.Next = node.Next;
node.Next.Prev = node.Prev;
tcx.RemoveNode(node);
// If it was legalized the triangle has already been mapped
if (!Legalize(tcx, triangle)) tcx.MapTriangleToNodes(triangle);
}
