/// <summary>
/// Create the arc(ModelArc)
/// </summary>
/// <param name="sketchId">the id of the sketch plane</param>
/// <param name="startPoint">the start point of the arc</param>
/// <param name="endPoint">the end point of the arc</param>
/// <param name="thirdPoint">the third point which is on the arc</param>
public void CreateArc(ElementId sketchId, Autodesk.Revit.DB.XYZ startPoint, Autodesk.Revit.DB.XYZ endPoint, Autodesk.Revit.DB.XYZ thirdPoint)
{
try
{
// First get the sketch plane by the giving element id.
SketchPlane workPlane = GetSketchPlaneById(sketchId);
// Additional check: the start, end and third point should not be the same
if (startPoint.Equals(endPoint) || startPoint.Equals(thirdPoint) ||
endPoint.Equals(thirdPoint))
{
throw new ArgumentException("Three points should not be the same.");
}
// create the geometry arc
Arc geometryArc = Arc.Create(startPoint, endPoint, thirdPoint);
if (null == geometryArc) // assert the creation is successful
{
throw new Exception("Create the geometry arc failed.");
}
// create the ModelArc
ModelArc arc = m_createDoc.NewModelCurve(geometryArc, workPlane) as ModelArc;
if (null == arc) // assert the creation is successful
{
throw new Exception("Create the ModelArc failed.");
}
// Add the created ModelArc into the arc array
m_arcArray.Append(arc);
// Finally refresh information map.
RefreshInformationMap();
}
catch (Exception ex)
{
throw new Exception("Can not create the ModelArc, message: " + ex.Message);
}
}
/// <summary>
/// Read the journal data from the journal.
/// All journal data is stored in commandData.Data.
/// </summary>
private void ReadJournalData()
{
// Get the journal data map from API
Document doc = m_commandData.Application.ActiveUIDocument.Document;
IDictionary <string, string> dataMap = m_commandData.JournalData;
String dataValue = null; // store the journal data value temporarily
// Get the wall type from the journal
dataValue = GetSpecialData(dataMap, "Wall Type Name"); // get wall type name
foreach (WallType type in m_wallTypeList) // get the wall type by the name
{
if (dataValue == type.Name)
{
m_createType = type;
break;
}
}
if (null == m_createType) // assert the wall type is exist
{
throw new InvalidDataException("Can't find the wall type from the journal.");
}
// Get the level information from the journal
dataValue = GetSpecialData(dataMap, "Level Id"); // get the level id
Autodesk.Revit.DB.ElementId id = new Autodesk.Revit.DB.ElementId(Convert.ToInt32(dataValue)); // get the level by its id
m_createlevel = doc.GetElement(id) as Level;
if (null == m_createlevel) // assert the level is exist
{
throw new InvalidDataException("Can't find the level from the journal.");
}
// Get the start point information from the journal
dataValue = GetSpecialData(dataMap, "Start Point");
m_startPoint = StirngToXYZ(dataValue);
// Get the end point information from the journal
dataValue = GetSpecialData(dataMap, "End Point");
m_endPoint = StirngToXYZ(dataValue);
// Create wall don't allow the start point equals end point
if (m_startPoint.Equals(m_endPoint))
{
throw new InvalidDataException("Start point is equal to end point.");
}
}
/// <summary>
/// The okButton click event method,
/// this method collect the data, and pass them to the journaling class
/// </summary>
private void okButton_Click(object sender, EventArgs e)
{
// Get the support data from the UI controls
Autodesk.Revit.DB.XYZ startPoint = startPointUserControl.GetPointData(); // start point
Autodesk.Revit.DB.XYZ endPoint = endPointUserControl.GetPointData(); // end point
if (startPoint.Equals(endPoint)) // Don't allow start point equals end point
{
TaskDialog.Show("Revit", "Start point should not equal end point.");
return;
}
double diff = Math.Abs(startPoint.Z - endPoint.Z);
if (diff > Precision)
{
TaskDialog.Show("Revit", "Z coordinate of start and end points should be equal.");
return;
}
Level level = levelComboBox.SelectedItem as Level; // level information
if (null == level) // assert it isn't null
{
TaskDialog.Show("Revit", "The selected level is null or incorrect.");
return;
}
WallType type = typeComboBox.SelectedItem as WallType; // wall type
if (null == type) // assert it isn't null
{
TaskDialog.Show("Revit", "The selected wall type is null or incorrect.");
return;
}
// Invoke SetNecessaryData method to set the collected support data
m_dataBuffer.SetNecessaryData(startPoint, endPoint, level, type);
// Set result information and close the form
this.DialogResult = DialogResult.OK;
this.Close();
}
private void ReadJournalData()
{
RevitDB.Document doc = m_commandData.Application.ActiveUIDocument.Document;
IDictionary <string, string> dataMap = m_commandData.JournalData;
string dataValue = null;
dataValue = GetSpecialData(dataMap, "Wall Type Name");
foreach (RevitDB.WallType type in m_wallTypeList)
{
if (dataValue == type.Name)
{
m_createType = type;
break;
}
}
if (null == m_createType)
{
throw new InvalidDataException("Can't find the wall type from the journal.");
}
dataValue = GetSpecialData(dataMap, "Level Id");
RevitDB.ElementId id = new RevitDB.ElementId(Convert.ToInt32(dataValue));
m_createlevel = doc.GetElement(id) as RevitDB.Level;
if (null == m_createlevel)
{
throw new InvalidDataException("Can't find the level from the journal.");
}
dataValue = GetSpecialData(dataMap, "Start Point");
m_startPoint = StringToXYZ(dataValue);
if (m_startPoint.Equals(m_endPoint))
{
throw new InvalidDataException("Start point is equal to end point.");
}
}
/// <summary>
/// Create the line(ModelLine)
/// </summary>
/// <param name="sketchId">the id of the sketch plane</param>
/// <param name="startPoint">the start point of the line</param>
/// <param name="endPoint">the end point of the line</param>
public void CreateLine(ElementId sketchId, Autodesk.Revit.DB.XYZ startPoint, Autodesk.Revit.DB.XYZ endPoint)
{
try
{
// First get the sketch plane by the giving element id.
SketchPlane workPlane = GetSketchPlaneById(sketchId);
// Additional check: start point should not equal end point
if (startPoint.Equals(endPoint))
{
throw new ArgumentException("Two points should not be the same.");
}
// create geometry line
Line geometryLine = Line.CreateBound(startPoint, endPoint);
if (null == geometryLine) // assert the creation is successful
{
throw new Exception("Create the geometry line failed.");
}
// create the ModelLine
ModelLine line = m_createDoc.NewModelCurve(geometryLine, workPlane) as ModelLine;
if (null == line) // assert the creation is successful
{
throw new Exception("Create the ModelLine failed.");
}
// Add the created ModelLine into the line array
m_lineArray.Append(line);
// Finally refresh information map.
RefreshInformationMap();
}
catch (Exception ex)
{
throw new Exception("Can not create the ModelLine, message: " + ex.Message);
}
}