/// <summary>
/// Convert a Revit BoundingBox to a ProtoGeometry BoundingBox
/// </summary>
/// <returns></returns>
public static Autodesk.DesignScript.Geometry.BoundingBox ToProtoType(this Autodesk.Revit.DB.BoundingBoxXYZ xyz)
{
xyz.Enabled = true;
var corners = new[] { xyz.Min.ToPoint(), xyz.Max.ToPoint() };
return(Autodesk.DesignScript.Geometry.BoundingBox.ByGeometry(corners));
}
/// <summary>
/// Get Base or SurveyPoint
/// </summary>
/// <param name="surveypoint"></param>
/// <returns></returns>
private static Point GetBaseOrSurveyPoint(bool surveypoint)
{
// Get Base or Survey point category
RVT.BuiltInCategory category = (surveypoint)? RVT.BuiltInCategory.OST_SharedBasePoint : RVT.BuiltInCategory.OST_ProjectBasePoint;
// Get Revit document
RVT.Document doc = RevitServices.Persistence.DocumentManager.Instance.CurrentDBDocument;
// Get all elements of the previously selected category
Autodesk.Revit.DB.FilteredElementCollector collector = new RVT.FilteredElementCollector(doc).OfCategory(category);
// Get the first element (should only be one)
RVT.BasePoint element = (RVT.BasePoint)collector.ToElements().FirstOrDefault();
if (element == null)
{
throw new Exception(Properties.Resources.CannotGetBaseOrSurveyPoint);
}
// Get the elements bounding box
RVT.BoundingBoxXYZ box = element.get_BoundingBox(null);
// Since the boundingbox is a point only, return Min or Max
return(box.Max.ToPoint());
}
/// <summary>
/// Sets the near clipping plane distance of the view. This is done by modifying the cropbox. Please note that modifying the far clip distance will reset any near clip modifications.
/// </summary>
/// <param name="View">A Dynamo wrapped view</param>
/// <param name="NearClipping">The Near Clipping Offset distance as a number from the camera</param>
/// <returns name="View">Returns the modified view</returns>
public static dynaView SetNearClippingDistance(dynaView3D View, double NearClipping)
{
string transactionName = "Set Near Clipping Distance";
revitView rView = (revitView)View.InternalElement;
revitBBxyz CropBox = rView.CropBox;
revitXYZ oldMax = CropBox.Max;
revitXYZ newMax = new revitXYZ(oldMax.X, oldMax.Y, -Math.Abs(NearClipping));
revitBBxyz NewCropBox = new revitBBxyz();
NewCropBox.Max = newMax;
NewCropBox.Min = CropBox.Min;
revitDoc document = rView.Document;
if (document.IsModifiable)
{
TransactionManager.Instance.EnsureInTransaction(document);
rView.CropBox = NewCropBox;
TransactionManager.Instance.TransactionTaskDone();
}
else
{
using (Autodesk.Revit.DB.Transaction trans = new Autodesk.Revit.DB.Transaction(document))
{
trans.Start(transactionName);
rView.CropBox = NewCropBox;
trans.Commit();
}
}
return(View);
}
public static BoundingBox ToBoundingBox(this DB.BoundingBoxXYZ value, out Transform transform)
{
var rhino = RawDecoder.AsBoundingBox(value, out transform);
UnitConverter.Scale(ref rhino, UnitConverter.ToRhinoUnits);
UnitConverter.Scale(ref transform, UnitConverter.ToRhinoUnits);
return(rhino);
}
public static Autodesk.DesignScript.Geometry.BoundingBox ToProtoType(this Autodesk.Revit.DB.BoundingBoxXYZ xyz, bool convertUnits = true)
{
xyz.Enabled = true;
return(Autodesk.DesignScript.Geometry.BoundingBox.ByCornersCoordinateSystem(
xyz.Min.ToPoint(convertUnits), xyz.Max.ToPoint(convertUnits),
xyz.Transform.ToCoordinateSystem(convertUnits)));
}
public static BoundingBox AsBoundingBox(DB.BoundingBoxXYZ bbox)
{
if (bbox?.Enabled ?? false)
{
var box = new BoundingBox(AsPoint3d(bbox.Min), AsPoint3d(bbox.Max));
return(AsTransform(bbox.Transform).TransformBoundingBox(box));
}
return(BoundingBox.Unset);
}
public static BoundingBox ToRhino(DB.BoundingBoxXYZ bbox)
{
if (bbox?.Enabled ?? false)
{
var box = new BoundingBox(ToRhino(bbox.Min), ToRhino(bbox.Max));
return(ToRhino(bbox.Transform).TransformBoundingBox(box));
}
return(BoundingBox.Empty);
}
public static BoundingBox ToRhino(this DB.BoundingBoxXYZ bbox)
{
if (bbox?.Enabled ?? false)
{
var box = new BoundingBox(bbox.Min.ToRhino(), bbox.Max.ToRhino());
return(bbox.Transform.ToRhino().TransformBoundingBox(box));
}
return(BoundingBox.Empty);
}
private void InternalSetIsolation(Autodesk.Revit.DB.BoundingBoxXYZ bbox, bool isolate)
{
if (isolate && bbox != null)
{
InternalIsolateInView(bbox);
}
else
{
InternalRemoveIsolation();
}
}
public static BoundingBox AsBoundingBox(DB.BoundingBoxXYZ bbox, out Transform transform)
{
if (bbox?.Enabled ?? false)
{
var box = new BoundingBox(AsPoint3d(bbox.Min), AsPoint3d(bbox.Max));
transform = AsTransform(bbox.Transform);
return(box);
}
transform = Transform.Identity;
return(BoundingBox.Unset);
}
public static Box AsBox(DB.BoundingBoxXYZ bbox)
{
return(new Box
(
new Plane
(
origin: AsPoint3d(bbox.Transform.Origin),
xDirection: AsVector3d(bbox.Transform.BasisX),
yDirection: AsVector3d(bbox.Transform.BasisY)
),
xSize: new Interval(bbox.Min.X, bbox.Max.X),
ySize: new Interval(bbox.Min.Y, bbox.Max.Y),
zSize: new Interval(bbox.Min.Z, bbox.Max.Z)
));
}
/// <summary>
/// Matches View3D's orientation and cropbox to an orthagonal view. Also sets the View3D to isometric.
/// </summary>
/// <param name="View3D">The 3D view to change orientation and crop</param>
/// <param name="SourceView">The source orthogonal view to acquire orientation and cropbox</param>
/// <param name="Offset">Offset of the camera from the view direction of the source view</param>
/// <returns name="View3D"></returns>
public static DynaView3D View3dOrientToggleIsometric(DynaView3D View3D, DynaView SourceView, double Offset)
{
string transactionName = "View3dOrientToggleIsometric";
RevitView3D rView = (RevitView3D)View3D.InternalElement;
RevitView rSourceView = (RevitView)SourceView.InternalElement;
RevitDoc document = rView.Document;
// Cropbox
RevitBB cropbox = rSourceView.CropBox;
RevitXYZ origin = cropbox.Transform.Origin;
// View Orientation
RevitXYZ rEyePosition = origin.Add(rSourceView.ViewDirection.Normalize().Multiply(Offset));
RevitXYZ rUpDirection = rSourceView.UpDirection;
RevitXYZ rForwardDirection = rSourceView.ViewDirection.Negate();
RevitViewOrientation viewOrient = new RevitViewOrientation(rEyePosition, rUpDirection, rForwardDirection);
Action <RevitView3D, RevitViewOrientation, RevitBB> orientView = (view, orient, cropbb) =>
{
view.ToggleToIsometric();
view.SetOrientation(orient);
view.CropBox = cropbb;
};
if (document.IsModifiable)
{
TransactionManager.Instance.EnsureInTransaction(document);
orientView(rView, viewOrient, cropbox);
TransactionManager.Instance.TransactionTaskDone();
}
else
{
using (Autodesk.Revit.DB.Transaction trans = new Autodesk.Revit.DB.Transaction(document))
{
trans.Start(transactionName);
orientView(rView, viewOrient, cropbox);
trans.Commit();
}
}
return(View3D);
}
public static Box ToBox(this DB.BoundingBoxXYZ value)
{
var rhino = RawDecoder.AsBoundingBox(value, out var transform);
UnitConverter.Scale(ref rhino, UnitConverter.ToRhinoUnits);
UnitConverter.Scale(ref transform, UnitConverter.ToRhinoUnits);
return(new Box
(
new Plane
(
origin: new Point3d(transform.M03, transform.M13, transform.M23),
xDirection: new Vector3d(transform.M00, transform.M10, transform.M20),
yDirection: new Vector3d(transform.M01, transform.M11, transform.M21)
),
xSize: new Interval(rhino.Min.X, rhino.Max.X),
ySize: new Interval(rhino.Min.Y, rhino.Max.Y),
zSize: new Interval(rhino.Min.Z, rhino.Max.Z)
));
}
public Box BoxToSpeckle(DB.BoundingBoxXYZ box, string units = null)
{
// convert min and max pts to speckle first
var min = PointToSpeckle(box.Min, units);
var max = PointToSpeckle(box.Max, units);
// get the base plane of the bounding box from the transform
var transform = box.Transform;
var plane = DB.Plane.CreateByOriginAndBasis(transform.Origin, transform.BasisX.Normalize(), transform.BasisY.Normalize());
var _box = new Box()
{
xSize = new Interval(min.x, max.x),
ySize = new Interval(min.y, max.y),
zSize = new Interval(min.z, max.z),
basePlane = PlaneToSpeckle(plane),
units = units ?? ModelUnits
};
return(_box);
}
/// <summary>
/// Set the far clipping distance of a view with far clipping active. This method preserves the near clip distance, however setting the far clip distance using any other method will reset the near clip distance.
/// </summary>
/// <param name="View">A Dynamo wrapped view</param>
/// <param name="FarClipping">The Far Clipping Offset distance as a number from the camera</param>
/// <returns name="View">Returns the modified view</returns>
public static dynaView SetFarClippingDistance(dynaView View, double FarClipping)
{
string transactionName = "Set Far Clipping Distance";
revitView rView = (revitView)View.InternalElement;
double NearClipping = rView.CropBox.Max.Z;
revitDoc document = rView.Document;
Action _SetFarClip = () =>
{
rView.get_Parameter(revitDB.BuiltInParameter.VIEWER_BOUND_OFFSET_FAR).Set(FarClipping);
revitBBxyz CropBox = rView.CropBox;
revitXYZ oldMax = CropBox.Max;
revitXYZ newMax = new revitXYZ(oldMax.X, oldMax.Y, -Math.Abs(NearClipping));
revitBBxyz NewCropBox = new revitBBxyz();
NewCropBox.Max = newMax;
NewCropBox.Min = CropBox.Min;
rView.CropBox = NewCropBox;
};
if (document.IsModifiable)
{
TransactionManager.Instance.EnsureInTransaction(document);
_SetFarClip();
TransactionManager.Instance.TransactionTaskDone();
}
else
{
using (Autodesk.Revit.DB.Transaction trans = new Autodesk.Revit.DB.Transaction(document))
{
trans.Start(transactionName);
_SetFarClip();
trans.Commit();
}
}
return(View);
}
public static View ViewSection(this Document document, Autodesk.Revit.DB.BoundingBoxXYZ boundingBoxXyz, string viewName = null, ElementId viewTemplateId = null, ViewDetailLevel viewDetailLevel = ViewDetailLevel.Coarse)
{
View result = null;
ViewFamilyType vft = Query.ViewFamilyType(document, ViewFamily.Section);
result = Autodesk.Revit.DB.ViewSection.CreateSection(document, vft.Id, boundingBoxXyz);
Modify.SetViewDetailLevel(result, viewDetailLevel);
if (viewTemplateId != null)
{
try
{
result.ViewTemplateId = viewTemplateId;
}
catch (Exception)
{
BH.Engine.Reflection.Compute.RecordWarning("Could not apply the View Template of Id " + viewTemplateId + "'." + ". Please check if it's a valid ElementId.");
}
}
if (!string.IsNullOrEmpty(viewName))
{
try
{
#if (REVIT2018 || REVIT2019)
result.ViewName = viewName;
#else
result.Name = viewName;
#endif
}
catch
{
BH.Engine.Reflection.Compute.RecordWarning("There is already a view named '" + viewName + "'." + " It has been named '" + result.Name + "' instead.");
}
}
return(result);
}
/// <summary>
/// Sets the cropbox of a view
/// </summary>
/// <param name="View">A Dynamo wrapped View</param>
/// <param name="CropBox">A Revit BoundBoxXYZ</param>
/// <returns name="View">A Dynamo wrapped View with an updated cropbox</returns>
public static dynaView SetCropbox(dynaView View, revitBBxyz CropBox)
{
revitView rView = (revitView)View.InternalElement;
revitDoc document = rView.Document;
if (document.IsModifiable)
{
TransactionManager.Instance.EnsureInTransaction(document);
rView.CropBox = CropBox;
TransactionManager.Instance.TransactionTaskDone();
}
else
{
using (Autodesk.Revit.DB.Transaction trans = new Autodesk.Revit.DB.Transaction(document))
{
trans.Start("Set CropBox of " + rView.Name);
rView.CropBox = CropBox;
trans.Commit();
}
}
return(View);
}
/// <summary>
/// Return a grid of points in the space
/// </summary>
/// <param name="step">Lenght between two points</param>
public List <Point> Grid(double step)
{
step = UnitConverter.DynamoToHostFactor(DB.UnitType.UT_Length) * step;
List <Point> grid = new List <Point>();
DB.BoundingBoxXYZ bb = InternalElement.get_BoundingBox(null);
for (double x = bb.Min.X; x < bb.Max.X;)
{
for (double y = bb.Min.Y; y < bb.Max.Y;)
{
DB.XYZ point = new DB.XYZ(x, y, bb.Min.Z);
if (InternalSpace.IsPointInSpace(point))
{
grid.Add(GeometryPrimitiveConverter.ToPoint(InternalTransform.OfPoint(point)));
}
y = y + step;
}
x = x + step;
}
return(grid);
}
public void ToRevitBoundingBox_Method_PreservesValues()
{
var csOrigin = Point.ByCoordinates(1, 2, 3);
var csX = Vector.ByCoordinates(0, 1, 0);
var csY = Vector.ByCoordinates(0, 0, 1);
var cs = CoordinateSystem.ByOriginVectors(csOrigin, csX, csY);
var minPoint = Point.ByCoordinates(-2, -2, -2);
var maxPoint = Point.ByCoordinates(2, 2, 2);
Autodesk.Revit.DB.BoundingBoxXYZ boundingBoxXYZ = GeometryPrimitiveConverter.ToRevitBoundingBox(
cs,
minPoint,
maxPoint);
boundingBoxXYZ.Min.ShouldBeApproximately(minPoint.InHostUnits());
boundingBoxXYZ.Max.ShouldBeApproximately(maxPoint.InHostUnits());
boundingBoxXYZ.Transform.Origin.ShouldBeApproximately(csOrigin.InHostUnits());
boundingBoxXYZ.Transform.BasisX.ShouldBeApproximately(csX);
boundingBoxXYZ.Transform.BasisY.ShouldBeApproximately(csY);
}
public cView(string sViewName, Autodesk.Revit.DB.View3D vView, BoundingBoxXYZ bXXY) //带参数的构造函数
{
this.sViewName = sViewName;
this.vView = vView;
this.bXYZ = bXYZ;
}
public static BoundingBox ToBoundingBox(this DB.BoundingBoxXYZ value)
{
var rhino = RawDecoder.ToRhino(value); UnitConverter.Scale(ref rhino, UnitConverter.ToRhinoUnits); return(rhino);
}
public static BoundingBox ToRhino(this DB.BoundingBoxXYZ bbox) => RawDecoder.ToRhino(bbox);
/// <summary>
/// GetMidpoint from bounding box
/// </summary>
/// <param name="box"></param>
/// <returns></returns>
private static Autodesk.Revit.DB.XYZ GetMidpoint(Autodesk.Revit.DB.BoundingBoxXYZ box)
{
return(box.Min + ((box.Max - box.Min) / 2));
}