// hardcoded default library
public static Library getHardCodedDefaultLib()
{
Library Library = new Library();
#region DEFAULTS - MUST BE IN LIBRARY
OpaqueMaterial defaultMat = new OpaqueMaterial() {
Name ="defaultMat",
Category ="Concrete",
Conductivity= 2.30,
Density =2400,
SpecificHeat=840,
ThermalEmittance=0.9,
SolarAbsorptance= 0.7,
VisibleAbsorptance=0.7
};
Library.Add(defaultMat);
GlazingMaterial defaultGMat = new GlazingMaterial() {
Name = "defaultGlazingMat",
Type= "Uncoated",
Conductivity = 0.9,
Density= 2500,
SolarTransmittance =0.68,
SolarReflectanceFront =0.09,
SolarReflectanceBack=0.10,
VisibleTransmittance=0.81,
VisibleReflectanceFront=0.11,
VisibleReflectanceBack=0.12,
IRTransmittance=0.00,
IREmissivityFront=0.84,
IREmissivityBack=0.20
};
Library.Add( defaultGMat);
Layer<OpaqueMaterial> defaultLay = new Layer<OpaqueMaterial>(0.25, defaultMat);
OpaqueConstruction defaultConstruction = new OpaqueConstruction();
defaultConstruction.Layers.Add(defaultLay);
defaultConstruction.Name = "defaultConstruction";
defaultConstruction.Type = ConstructionTypes.Facade;// "Facade";
Library.Add( defaultConstruction);
Layer<WindowMaterialBase> defaultGLay = new Layer<WindowMaterialBase>(0.006, defaultGMat);
GlazingConstruction defaultGlazing = new GlazingConstruction();
defaultGlazing.Layers.Add(defaultGLay);
defaultGlazing.Name = "defaultGlazing";
defaultGlazing.Type = GlazingConstructionTypes.Single;// "Single";
Library.Add( defaultGlazing);
//AIRWALL
GlazingMaterial AirWallMat = new GlazingMaterial()
{
Name = "100TRANS",
Type = "uncoated",
Conductivity = 5,
Density = 0.0001,
SolarTransmittance = 0.99,
SolarReflectanceFront = 0.005,
SolarReflectanceBack = 0.005,
VisibleTransmittance = 0.99,
VisibleReflectanceFront = 0.005,
VisibleReflectanceBack = 0.005,
IRTransmittance = 0.99,
IREmissivityFront = 0.005,
IREmissivityBack = 0.005
};
Library.Add(AirWallMat);
Layer<WindowMaterialBase> airwallLayer = new Layer<WindowMaterialBase>(0.003, AirWallMat);
GlazingConstruction airWall = new GlazingConstruction();
airWall.Layers.Add(airwallLayer);
airWall.Name = "Airwall";
airWall.Type = GlazingConstructionTypes.Other;// "Other";
Library.Add( airWall);
//---------------------------------------------------------------------------------gases
// add all possible gas materials to GasMaterials
// string[] gases = { "AIR", "ARGON", "KRYPTON", "XENON", "SF6" };
Library.GasMaterials.Clear();
foreach (var s in Enum.GetValues(typeof(GasTypes)).Cast<GasTypes>())
{
Library.GasMaterials.Add(new GasMaterial(s));
}
int[] MonthFrom = { 1 };
int[] DayFrom = { 1 };
int[] MonthTo = { 12 };
int[] DayTo = { 31 };
double[] hourlyAllOnArr = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
YearSchedule.QuickSchedule("AllOn", hourlyAllOnArr, "Fraction", "Default Library", ref Library);
double[] hourlyAllOffArr = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
YearSchedule.QuickSchedule("AllOff", hourlyAllOffArr, "Fraction", "Default Library", ref Library);
Library.Add(new ZoneLoad() { Name = "Off", PeopleIsOn = false, EquipmentIsOn = false , LightsIsOn = false, PeopleDensity = 0, IlluminanceTarget = 0, LightingPowerDensity = 0, EquipmentPowerDensity = 0, OccupancySchedule = "AllOn", EquipmentAvailibilitySchedule = "AllOn", LightsAvailibilitySchedule = "AllOn", Category = "Default", DataSource = "Default" });
Library.Add(new ZoneConditioning() { Name = "Off", HeatIsOn=false, CoolIsOn =false, MechVentIsOn = false, HeatingSetpoint = 19, CoolingSetpoint = 26, MinFreshAirPerson = 0, MinFreshAirArea = 0, Category = "Default" });
Library.Add(new ZoneVentilation() { Name = "Off", InfiltrationIsOn = false, InfiltrationAch = 0.15, InfiltrationModel = InfiltrationModel.Wind, Category = "Infiltration" });
Library.Add(new DomHotWater() { Name = "Off", IsOn = false, FlowRatePerFloorArea = 0, WaterSchedule = "AllOn", WaterTemperatureInlet = 10, WaterSupplyTemperature = 60 });
Library.Add(new ZoneConstruction() { Name = "Default", RoofConstruction = "defaultConstruction", FacadeConstruction = "defaultConstruction", SlabConstruction = "defaultConstruction", GroundConstruction = "defaultConstruction", PartitionConstruction = "defaultConstruction" });
#endregion
#region OpaqueMaterialsWithEEIndicators
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Pine wood", Category = @"Timber", Conductivity = 0.13, Density = 520, SpecificHeat = 1600, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 10, EmbodiedCarbon = 0.71, Cost = 0, Comment = @"[lambda rho c: U-Wert.net][LCA ICE (0.31fos + 0.41bio-embodied cabon emissions)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Douglas fir", Category = @"Timber", Conductivity = 0.12, Density = 530, SpecificHeat = 1600, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 10, EmbodiedCarbon = 0.71, Cost = 0, Comment = @"[lambda rho c: U-Wert.net][LCA ICE (0.31fos + 0.41bio-embodied cabon emissions)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Oak", Category = @"Timber", Conductivity = 0.18, Density = 690, SpecificHeat = 2400, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 10, EmbodiedCarbon = 0.71, Cost = 0, Comment = @"[lambda rho c: U-Wert.net][LCA ICE (0.31fos + 0.41bio-embodied cabon emissions)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Spruce", Category = @"Timber", Conductivity = 0.13, Density = 450, SpecificHeat = 1600, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 10, EmbodiedCarbon = 0.71, Cost = 0, Comment = @"[lambda rho c: U-Wert.net][LCA ICE (0.31fos + 0.41bio-embodied cabon emissions)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Larch", Category = @"Timber", Conductivity = 0.13, Density = 460, SpecificHeat = 1600, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 10, EmbodiedCarbon = 0.71, Cost = 0, Comment = @"[lambda rho c: U-Wert.net][LCA ICE (0.31fos + 0.41bio-embodied cabon emissions)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Oriented strand board", Category = @"Timber", Conductivity = 0.13, Density = 650, SpecificHeat = 1700, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 15, EmbodiedCarbon = 0.96, Cost = 0, Comment = @"[lambda rho c: U-Wert.net][LCA ICE (0.45fos + 0.54 bio- embodied carbon emissions)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Medium density fiberboard", Category = @"Timber", Conductivity = 0.09, Density = 500, SpecificHeat = 1700, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 11, EmbodiedCarbon = 0.72, Cost = 0, Comment = @"[lambda rho c: U-Wert.net][LCA ICE (0.39fos + 0.35bio- embodied carbon emissions)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Chipboard", Category = @"Timber", Conductivity = 0.14, Density = 650, SpecificHeat = 1800, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 10, EmbodiedCarbon = 0.71, Cost = 0, Comment = @"[lambda rho c: U-Wert.net][LCA ICE (0.39fos + 0.35bio- embodied carbon emissions)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"General Concrete", Category = @"Concrete", Conductivity = 2, Density = 2400, SpecificHeat = 950, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 0.75, EmbodiedCarbon = 0.1, Cost = 0, Comment = @"[lambda rho c: U-Wert.net][LCA ICE, General Concrete data]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Concrete reinforced 20-30 MPa", Category = @"Concrete", Conductivity = 2, Density = 2400, SpecificHeat = 950, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 0.75, EmbodiedCarbon = 0.1, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] General concrete data used for density through visible absorptance. Data averaged for embodied enegy, embodied carbon and embodied carbon emissions." });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Concrete reinforced 30-50 MPa", Category = @"Concrete", Conductivity = 2, Density = 2400, SpecificHeat = 950, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0.74, EmbodiedCarbon = 0.099, Cost = 0, Comment = @"[lambda rho c: U-Wert.net]General concrete data used for density through visible absorptance. Data averaged for embodied enegy, embodied carbon and embodied carbon emissions." });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Asphalt low binder content", Category = @"Screed", Conductivity = 0.75, Density = 2350, SpecificHeat = 920, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 3.39, EmbodiedCarbon = 0.191, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] General asphalt data used for density through visible absorptance, averaged data for embodied energy through embodied carbon emissions" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Asphalt high binder content", Category = @"Screed", Conductivity = 0.75, Density = 2350, SpecificHeat = 920, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 4.46, EmbodiedCarbon = 0.216, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] General asphalt data used for density through visible absorptance, averaged data for embodied energy through embodied carbon emissions" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Lightweight concrete", Category = @"Concrete", Conductivity = 1.3, Density = 1800, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0.78, EmbodiedCarbon = 0.106, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE Concrete 20/25 Mpa]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Cement screed", Category = @"Screed", Conductivity = 1.4, Density = 2000, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 1.33, EmbodiedCarbon = 0.221, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [ LCA ICE, Mortar (1:3 cement:sand mix) ]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Basalt", Category = @"Masonry", Conductivity = 3.5, Density = 2850, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 1.26, EmbodiedCarbon = 0.073, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE General Stone]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Granite", Category = @"Masonry", Conductivity = 2.8, Density = 2600, SpecificHeat = 790, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 11, EmbodiedCarbon = 0.64, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE Granite]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Lime stone", Category = @"Masonry", Conductivity = 1.4, Density = 2000, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 1.5, EmbodiedCarbon = 0.087, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE, Limestone]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Adobe 1500kg_m3", Category = @"Masonry", Conductivity = 0.66, Density = 1500, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 3, EmbodiedCarbon = 0.23, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA ICE, General Clay data]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Sand stone", Category = @"Masonry", Conductivity = 2.3, Density = 2600, SpecificHeat = 710, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 1, EmbodiedCarbon = 0.058, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE Sandstone]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Clinker brick 1400kg_m3", Category = @"Masonry", Conductivity = 0.58, Density = 1400, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 3, EmbodiedCarbon = 0.23, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE General (Common Brick)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Clinker brick 1600kg_m3", Category = @"Masonry", Conductivity = 0.68, Density = 1600, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 3, EmbodiedCarbon = 0.23, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE General (Common Brick)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Clinker brick 1800kg_m3", Category = @"Masonry", Conductivity = 0.81, Density = 1800, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 3, EmbodiedCarbon = 0.23, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE General (Common Brick)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Clinker brick 2000kg_m3", Category = @"Masonry", Conductivity = 0.96, Density = 2000, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 3, EmbodiedCarbon = 0.23, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE General (Common Brick)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Aerated concrete 350kg_m3", Category = @"Masonry", Conductivity = 0.09, Density = 350, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 3.5, EmbodiedCarbon = 0.3075, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE Autoclaved Aerated Blocks (ACC's)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Aerated concrete 500kg_m3", Category = @"Masonry", Conductivity = 0.12, Density = 500, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 3.5, EmbodiedCarbon = 0.3075, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE Autoclaved Aerated Blocks (ACC's)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Ytong block W PP 1.6-0.30", Category = @"Masonry", Conductivity = 0.08, Density = 300, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 3.5, EmbodiedCarbon = 0.31, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE Autoclaved Aerated Blocks (ACC's)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Poroton Plan-T10", Category = @"Masonry", Conductivity = 0.1, Density = 650, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 3, EmbodiedCarbon = 0.23, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE General Common Brick]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Rigid foam EPS 035", Category = @"Insulation", Conductivity = 0.035, Density = 30, SpecificHeat = 1500, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 101.5, EmbodiedCarbon = 3.48, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE Polyurethane Rigid Foam]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Rigid foam PUR no coating", Category = @"Insulation", Conductivity = 0.03, Density = 30, SpecificHeat = 1400, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 101.5, EmbodiedCarbon = 3.48, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE Polyurethane Rigid Foam]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Rigid foam PUR alu coating", Category = @"Insulation", Conductivity = 0.025, Density = 30, SpecificHeat = 1400, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 101.5, EmbodiedCarbon = 3.48, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE Polyurethane Rigid Foam]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Rigid foam PUR fleece coating", Category = @"Insulation", Conductivity = 0.028, Density = 30, SpecificHeat = 1400, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 101.5, EmbodiedCarbon = 3.48, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE Polyurethane Rigid Foam]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Wood fiber insulating board", Category = @"Insulation", Conductivity = 0.042, Density = 160, SpecificHeat = 2100, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 45, EmbodiedCarbon = 1.86, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE General Insulation]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Styrofoam", Category = @"Insulation", Conductivity = 0.04, Density = 20, SpecificHeat = 1500, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 101.5, EmbodiedCarbon = 3.48, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] No data found" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Vacuum insulation panel Variotec", Category = @"Insulation", Conductivity = 0.007, Density = 205, SpecificHeat = 900, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 45, EmbodiedCarbon = 1.86, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE, General Insulation]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Wood wool board 15mm", Category = @"Timber", Conductivity = 0.09, Density = 570, SpecificHeat = 2100, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 20, EmbodiedCarbon = 0.98, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE, Woodwool (Board)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Wood wool board 25mm", Category = @"Timber", Conductivity = 0.09, Density = 460, SpecificHeat = 2100, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 20, EmbodiedCarbon = 0.98, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE, Woodwool (Board)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Wood wool board 35mm", Category = @"Timber", Conductivity = 0.09, Density = 415, SpecificHeat = 2100, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 20, EmbodiedCarbon = 0.98, Cost = 0, Comment = @"[lambda rho c: U-Wert.net][LCA, ICE, Woodwool (Board)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Wood wool board 50mm", Category = @"Timber", Conductivity = 0.09, Density = 390, SpecificHeat = 2100, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 20, EmbodiedCarbon = 0.98, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE, Woodwool (Board)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Light adobe NF 700", Category = @"Masonry", Conductivity = 0.21, Density = 700, SpecificHeat = 1200, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 3, EmbodiedCarbon = 0.23, Cost = 0, Comment = @"U-Wert.net [LCA, ICE General (Simple Clay Baked Products)" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Light adobe NF 1200", Category = @"Masonry", Conductivity = 0.47, Density = 1200, SpecificHeat = 1200, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 3, EmbodiedCarbon = 0.23, Cost = 0, Comment = @"U-Wert.net [LCA, ICE General (Simple Clay Baked Products)" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Light adobe NF 1800", Category = @"Masonry", Conductivity = 0.91, Density = 1800, SpecificHeat = 1200, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 3, EmbodiedCarbon = 0.23, Cost = 0, Comment = @"U-Wert.net [LCA, ICE General (Simple Clay Baked Products)" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Shale", Category = @"Masonry", Conductivity = 2.2, Density = 2400, SpecificHeat = 760, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0.03, EmbodiedCarbon = 0.002, Cost = 0, Comment = @"U-Wert.net [LCA, ICE Shale]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Clinker brick", Category = @"Masonry", Conductivity = 0.96, Density = 2000, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 3, EmbodiedCarbon = 0.23, Cost = 0, Comment = @"U-Wert.net [LCA, ICE General Common Bricks]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Ytong block W PP 2-0.35", Category = @"Masonry", Conductivity = 0.09, Density = 350, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 3.5, EmbodiedCarbon = 0.31, Cost = 0, Comment = @"U-Wert.net [LCA, ICE Autoclaved Aerated Blocks (AAC's)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Ytong block W PP 2-0.40", Category = @"Masonry", Conductivity = 0.1, Density = 400, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 3.5, EmbodiedCarbon = 0.31, Cost = 0, Comment = @"U-Wert.net [LCA, ICE Autoclaved Aerated Blocks (AAC's)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Ytong block W PP 4-0.50", Category = @"Masonry", Conductivity = 0.12, Density = 500, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 3.5, EmbodiedCarbon = 0.31, Cost = 0, Comment = @"U-Wert.net [LCA, ICE Autoclaved Aerated Blocks (AAC's)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Ytong block W PP 4-0.55", Category = @"Masonry", Conductivity = 0.14, Density = 550, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 3.5, EmbodiedCarbon = 0.31, Cost = 0, Comment = @"U-Wert.net [LCA, ICE Autoclaved Aerated Blocks (AAC's)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Ytong block W PP 4-0.60", Category = @"Masonry", Conductivity = 0.16, Density = 600, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 3.5, EmbodiedCarbon = 0.31, Cost = 0, Comment = @"U-Wert.net [LCA, ICE Autoclaved Aerated Blocks (AAC's)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Ytong block W PP 6-0.65", Category = @"Masonry", Conductivity = 0.18, Density = 650, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 3.5, EmbodiedCarbon = 0.31, Cost = 0, Comment = @"U-Wert.net [LCA, ICE Autoclaved Aerated Blocks (AAC's)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Poroton T12", Category = @"Masonry", Conductivity = 0.12, Density = 650, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 3, EmbodiedCarbon = 0.23, Cost = 0, Comment = @"U-Wert.net [LCA, ICE General Common Bricks]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Cork", Category = @"Insulation", Conductivity = 0.05, Density = 160, SpecificHeat = 1800, ThermalEmittance = 0.9, SolarAbsorptance = 0.78, VisibleAbsorptance = 0.78, EmbodiedEnergy = 4, EmbodiedCarbon = 0.19, Cost = 0, Comment = @"[lambda rho c: U-Wert.net][ThermalEmittance SolarAbsorptance VisibleAbsorptance: DesignBuilderv3] [LCA, ICE Cork]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Ytong Multipor DAA ds", Category = @"Insulation", Conductivity = 0.047, Density = 115, SpecificHeat = 1300, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 45, EmbodiedCarbon = 1.86, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE General Insulation]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Ytong Multipor WI WTR DI", Category = @"Insulation", Conductivity = 0.042, Density = 90, SpecificHeat = 1300, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 45, EmbodiedCarbon = 1.86, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE General Insulation]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Ytong Multipor WAP", Category = @"Insulation", Conductivity = 0.045, Density = 110, SpecificHeat = 1300, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 45, EmbodiedCarbon = 1.86, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE General Insulation]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Foam glass", Category = @"Insulation", Conductivity = 0.056, Density = 130, SpecificHeat = 750, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 27, EmbodiedCarbon = 0, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE, Celular Glass]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Reed", Category = @"Insulation", Conductivity = 0.065, Density = 225, SpecificHeat = 1200, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0.24, EmbodiedCarbon = 0.01, Cost = 0, Comment = @"[lambda rho c: U-Wert.net][ LCA, ICE, Straw]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Vacuum insulation panel Vacupor NT-B2-S", Category = @"Insulation", Conductivity = 0.007, Density = 190, SpecificHeat = 1050, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 45, EmbodiedCarbon = 1.86, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [LCA, ICE General Insulation]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Stainless Steel", Category = @"Metal", Conductivity = 45, Density = 7800, SpecificHeat = 480, ThermalEmittance = 0.1, SolarAbsorptance = 0.4, VisibleAbsorptance = 0.4, EmbodiedEnergy = 56.7, EmbodiedCarbon = 6.15, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [ LCA ICE, Stainless Steel]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Steel", Category = @"Metal", Conductivity = 45, Density = 7800, SpecificHeat = 480, ThermalEmittance = 0.1, SolarAbsorptance = 0.4, VisibleAbsorptance = 0.4, EmbodiedEnergy = 20.1, EmbodiedCarbon = 1.46, Cost = 0, Comment = @"[lambda rho c: U-Wert.net] [ LCA ICE, General Steel ]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Rammed Earth", Category = @"Masonry", Conductivity = 0.75, Density = 1730, SpecificHeat = 880, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @" [lambda rho c: U-Wert.net] [LCA, ICE Mud] [LCA, ICE, Single Clay Brick]" });
//double check EE values
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"GypsumFibreBoard", Category = @"Boards", Conductivity = 0.32, Density = 1000, SpecificHeat = 1100, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 45, EmbodiedCarbon = 1.86, Cost = 0, Comment = @"[lambda rho c: Saint-Gobain Rigips][LCA ICE (0.31fos + 0.41bio-embodied cabon emissions)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Cross Laminated Timber", Category = @"Timber", Conductivity = 0.13, Density = 500, SpecificHeat = 1600, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 10, EmbodiedCarbon = 0.71, Cost = 0, Comment = @"[lambda rho c: dataholz.com][LCA ICE (0.31fos + 0.41bio-embodied cabon emissions)]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Plaster", Category = @"Screed", Conductivity = 1.0, Density = 2000, SpecificHeat = 1130, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 1.33, EmbodiedCarbon = 0.221, Cost = 0, Comment = @"[lambda rho c: dataholz.com] [ LCA ICE, Mortar (1:3 cement:sand mix) ]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Mineral Wool", Category = @"Insulation", Conductivity = 0.041, Density = 155, SpecificHeat = 1130, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"[lambda rho c: dataholz.com]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"XPS Board", Category = "Insulation", Conductivity = 0.034, Density = 35, SpecificHeat = 1400, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 87.4, EmbodiedCarbon = 2.8, Cost = 0.0, Comment = "" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Sand-Lime Brick", Category = "Masonry", Conductivity = 0.56, Density = 1200, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = "" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Bonded chippings", Category = @"Screed", Conductivity = 0.7, Density = 1800, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = "" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Impact sound insulation", Category = "Insulation", Conductivity = 0.035, Density = 120, SpecificHeat = 1030, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0.0, Comment = "" });
#endregion
//Basic wall
OpaqueConstruction.QuickConstruction("120mmInsulation 200mmConcrete", ConstructionTypes.Facade, new string[] { "XPS Board", "General Concrete" }, new double[] { 0.12, 0.20 }, "Concrete", "", ref Library);
//Basic roof
OpaqueConstruction.QuickConstruction("300mmInsulation 200mmConcrete", ConstructionTypes.Facade, new string[] { "XPS Board", "General Concrete" }, new double[] { 0.30, 0.20 }, "Concrete", "", ref Library);
//Basic floor
OpaqueConstruction.QuickConstruction("200mmConcrete", ConstructionTypes.InteriorFloor, new string[] { "General Concrete" }, new double[] { 0.20 }, "Concrete", "", ref Library);
//Basic partition
OpaqueConstruction.QuickConstruction("115mmSandLimeBrick", ConstructionTypes.Partition, new string[] { "Plaster", "Sand-Lime Brick", "Plaster" }, new double[] { 0.005, 0.08, 0.08 }, "Concrete", "", ref Library);
//Basic ground
OpaqueConstruction.QuickConstruction("300mmConcrete 80mmInsulation 80mmScreed", ConstructionTypes.Partition, new string[] { "General Concrete", "XPS Board", "Cement screed" }, new double[] { 0.3, 0.115, 0.005 }, "Concrete", "", ref Library);
//Solid wood constructions
OpaqueConstruction.QuickConstruction("300mmInsulation 94mmSolidWood 24mmGypsum", ConstructionTypes.Facade, new string[] { "Medium density fiberboard", "Wood fiber insulating board", "Cross Laminated Timber", "Wood fiber insulating board", "GypsumFibreBoard" }, new double[] { 0.015, 0.3 , 0.094, 0.08, 0.0245 },"Timber", "dataholz.com", ref Library);
OpaqueConstruction.QuickConstruction("120mmInsulation 78mmSolidWood 13mmGypsum", ConstructionTypes.Facade, new string[] { "Plaster", "Mineral Wool", "Cross Laminated Timber", "GypsumFibreBoard" }, new double[] { 0.004, 0.12, 0.078, 0.013 }, "Timber", "dataholz.com", ref Library);
OpaqueConstruction.QuickConstruction("160mmInsulation 94mmSolidWood", ConstructionTypes.Facade, new string[] { "Mineral Wool", "Mineral Wool", "Cross Laminated Timber" }, new double[] { 0.08, 0.08, 0.094 }, "Timber", "dataholz.com", ref Library);
OpaqueConstruction.QuickConstruction("160mmInsulation 94mmSolidWood", ConstructionTypes.Facade, new string[] { "Mineral Wool", "Mineral Wool", "Cross Laminated Timber" }, new double[] { 0.08, 0.08, 0.094 }, "Timber", "dataholz.com", ref Library);
OpaqueConstruction.QuickConstruction("12mmGypsum 78mmSolidWood 12mmGypsum", ConstructionTypes.Partition, new string[] { "GypsumFibreBoard", "Cross Laminated Timber", "GypsumFibreBoard" }, new double[] { 0.012, 0.78, 0.012 }, "Timber", "dataholz.com", ref Library);
OpaqueConstruction.QuickConstruction("78mmSolidWood", ConstructionTypes.Partition, new string[] { "Cross Laminated Timber" }, new double[] { 0.78 }, "Timber", "dataholz.com", ref Library);
OpaqueConstruction.QuickConstruction("150mmScreedWithImpactSoundInsulation 140mmSolidWood", ConstructionTypes.InteriorFloor, new string[] { "Cross Laminated Timber", "Bonded chippings", "Impact sound insulation" , "Cement screed" }, new double[] { 0.14, 0.06, 0.03, 0.06 }, "Timber", "dataholz.com, gdmnxn02-00", ref Library);
//List of premade basic glazing materials/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
GlazingMaterial gm1 = new GlazingMaterial()
{
Name = "Generic Clear Glass 6mm",
Type = "Uncoated",
Conductivity = 0.9,
Density = 2500,
EmbodiedEnergy = 15,
EmbodiedCarbon = 0.85,
Cost = 0.0,
Comment = "",
SolarTransmittance = 0.68,
SolarReflectanceFront = 0.09,
SolarReflectanceBack = 0.10,
VisibleTransmittance = 0.81,
VisibleReflectanceFront = 0.11,
VisibleReflectanceBack = 0.12,
IRTransmittance = 0.00,
IREmissivityFront = 0.84,
IREmissivityBack = 0.20
};
Library.Add(gm1);
//List of premade basic glazing constructions/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
//Basic double glazing
Layer<WindowMaterialBase> go1 = new Layer<WindowMaterialBase>(0.006, gm1);
Layer<WindowMaterialBase> go2 = new Layer<WindowMaterialBase>(0.0013, Library.GasMaterials.Single(o=>o.Name == "ARGON"));
GlazingConstruction gc1 = new GlazingConstruction();
gc1.Layers.Add(go1);
gc1.Layers.Add(go2);
gc1.Layers.Add(go1);
gc1.Name = "DblClear Air 6_13_6";
gc1.Type = GlazingConstructionTypes.Double;// "Double";
Library.Add( gc1);
#region schedules
//--------------------------------------------------------------------------------schedules
YearSchedule.QuickSchedule("occBedroom", new double[] { 1, 1, 1, 1, 1, 1, 0.8, 0.6, 0.4, 0.4, 0.4, 0.6, 0.8, 0.6, 0.4, 0.4, 0.6, 0.8, 0.8, 0.8, 0.8, 1, 1, 1 }, "Residential" , "SIA Merkblatt 2024", ref Library);
YearSchedule.QuickSchedule("equipBedroom", new double[] { 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.5, 1, 0.5, 0.5, 0.5, 1, 1, 0.5, 0.5, 0.5, 1, 1, 1, 1, 0.5, 0.5, 0.5, 0.1 }, "Residential" , "SIA Merkblatt 2024", ref Library);
YearSchedule.QuickSchedule("lightsBedroom", new double[] { 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0 }, "Residential", "based on SIA Merkblatt 2024 Occ Schedule", ref Library);
YearSchedule.QuickSchedule("occKitchen", new double[] { 0, 0, 0, 0, 0, 0, 0.4, 0.8, 0.4, 0, 0, 0.4, 0.8, 0.4, 0, 0, 0.4, 1, 0.6, 0.4, 0, 0, 0, 0 }, "Residential" , "SIA Merkblatt 2024", ref Library);
YearSchedule.QuickSchedule("equipKitchen", new double[] { 0.2, 0.2, 0.2, 0.2, 0.2, 0.2, 0.4, 0.8, 0.4, 0.2, 0.2, 0.4, 1, 0.4, 0.2, 0.2, 0.4, 1, 0.4, 0.2, 0.2, 0.2, 0.2, 0.2 }, "Residential", "SIA Merkblatt 2024", ref Library);
YearSchedule.QuickSchedule("lightsKitchen", new double[] { 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 1, 1, 1, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0 }, "Residential", "based on SIA Merkblatt 2024 Occ Schedule", ref Library);
YearSchedule.QuickSchedule("occOffice", new double[] { 0, 0, 0, 0, 0, 0, 0, 0.2, 0.4, 0.6, 0.8, 0.8, 0.4, 0.6, 0.8, 0.8, 0.4, 0.2, 0, 0, 0, 0, 0, 0 }, new double[] { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, "Office","SIA Merkblatt 2024", ref Library);
YearSchedule.QuickSchedule("equipOffice", new double[] { 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.2, 0.4, 0.6, 0.8, 0.8, 0.4, 0.6, 0.8, 0.8, 0.4, 0.2, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1 }, new double[] { 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1 } , "Office", "SIA Merkblatt 2024", ref Library);
YearSchedule.QuickSchedule("lightsOffice", new double[] { 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0 }, new double[] { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, "Office", "based on SIA Merkblatt 2024 Occ Schedule", ref Library);
YearSchedule.QuickSchedule("occMeetingRoom", new double[] { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0.6, 1, 0.4, 0, 0, 0.6, 1, 0.4, 0, 0, 0, 0, 0, 0, 0 }, new double[] { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, "Office", "SIA Merkblatt 2024", ref Library);
YearSchedule.QuickSchedule("equipMeetingRoom", new double[] { 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.2, 0.4, 0.6, 0.8, 0.8, 0.4, 0.6, 0.8, 0.8, 0.4, 0.2, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1 }, new double[] { 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1 }, "Office", "SIA Merkblatt 2024", ref Library);
YearSchedule.QuickSchedule("lightsMeetingRoom", new double[] { 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 }, new double[] { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, "Office", "based on SIA Merkblatt 2024 Occ Schedule", ref Library);
YearSchedule.QuickSchedule("occLibrary", new double[] { 0, 0, 0, 0, 0, 0, 0, 0.2, 0.6, 1, 1, 0.2, 0.2, 1, 1, 0.6, 0.2, 0, 0, 0, 0, 0, 0, 0 }, "Education", "SIA Merkblatt 2024", ref Library);
YearSchedule.QuickSchedule("equipLibrary", new double[] { 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.2, 0.6, 1, 1, 0.2, 0.2, 1, 1, 0.6, 0.4, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1 }, "Education", "SIA Merkblatt 2024", ref Library);
YearSchedule.QuickSchedule("lightsLibrary", new double[] { 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 }, "Education", "based on SIA Merkblatt 2024 Occ Schedule", ref Library);
YearSchedule.QuickSchedule("occLectureHall", new double[] { 0, 0, 0, 0, 0, 0, 0, 0.2, 0.6, 1, 1, 0.2, 0.2, 1, 1, 0.6, 0.2, 0, 0, 0, 0, 0, 0, 0 }, new double[] { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, "Education", "SIA Merkblatt 2024", ref Library);
YearSchedule.QuickSchedule("equipLectureHall", new double[] { 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.2, 0.6, 1, 1, 0.2, 0.2, 1, 1, 0.6, 0.4, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1 }, new double[] { 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1 }, "Education", "SIA Merkblatt 2024", ref Library);
YearSchedule.QuickSchedule("lightsLectureHall", new double[] { 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 }, new double[] { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, "Education", "based on SIA Merkblatt 2024 Occ Schedule", ref Library);
YearSchedule.QuickSchedule("occSuperMarket", new double[] { 0, 0, 0, 0, 0, 0, 0, 0.2, 0.4, 0.4, 0.4, 0.6, 0.6, 0.6, 0.4, 0.4, 0.6, 0.8, 0.6, 0, 0, 0, 0, 0 }, "Commercial", "SIA Merkblatt 2024", ref Library);
YearSchedule.QuickSchedule("equipSuperMarket", new double[] { 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0.1, 0.1, 0.1, 0.1, 0.1 }, "Commercial", "SIA Merkblatt 2024", ref Library);
YearSchedule.QuickSchedule("lightsSuperMarket", new double[] { 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0 }, "Commercial", "based on SIA Merkblatt 2024 Occ Schedule", ref Library);
YearSchedule.QuickSchedule("occShopping", new double[] { 0, 0, 0, 0, 0, 0, 0, 0.2, 0.4, 0.4, 0.4, 0.6, 0.6, 0.6, 0.4, 0.4, 0.6, 0.8, 0.6, 0, 0, 0, 0, 0 }, "Commercial", "SIA Merkblatt 2024", ref Library);
YearSchedule.QuickSchedule("equipShopping", new double[] { 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0.1, 0.1, 0.1, 0.1, 0.1 }, "Commercial", "SIA Merkblatt 2024", ref Library);
YearSchedule.QuickSchedule("lightsShopping", new double[] { 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0 }, "Commercial", "based on SIA Merkblatt 2024 Occ Schedule", ref Library);
Random r = new Random();
var Values = new double[8760];
for (int i = 0; i < 8760; i++) { Values[i] = (double)r.Next(1, 100) / 100.0; }
Library.Add(new ScheduleArray() { Name = "RandomBehavior", Category = "Random", Values = Values });
//Library.ArraySchedules.Add(new ScheduleArray() { Name = "RandomBehavior2", Category = "Random", Values = Values });
#endregion
Library.Add(new ZoneLoad() { Name = "BedroomLoads", PeopleDensity = 1.0 / 40.0, IlluminanceTarget = 200, LightingPowerDensity = 9.5, EquipmentPowerDensity = 2, OccupancySchedule = "occBedroom", EquipmentAvailibilitySchedule = "equipBedroom", LightsAvailibilitySchedule = "lightsBedroom", Category = "Residential" ,DataSource = "SIA Merkblatt 2024" });
Library.Add(new ZoneLoad() { Name = "KitchenLoads", PeopleDensity = 1.0 / 5.0, IlluminanceTarget = 500, LightingPowerDensity = 17, EquipmentPowerDensity = 40, OccupancySchedule = "occKitchen", EquipmentAvailibilitySchedule = "equipKitchen", LightsAvailibilitySchedule = "lightsKitchen", Category = "Residential" ,DataSource = "SIA Merkblatt 2024" });
Library.Add(new ZoneLoad() { Name = "SingleOfficeLoads", PeopleDensity = 1.0 / 14.0, IlluminanceTarget = 500, LightingPowerDensity = 16, EquipmentPowerDensity = 7, OccupancySchedule = "occOffice", EquipmentAvailibilitySchedule = "equipOffice", LightsAvailibilitySchedule = "lightsOffice", Category = "Office", DataSource = "SIA Merkblatt 2024" });
Library.Add(new ZoneLoad() { Name = "MeetingRoomLoads", PeopleDensity = 1.0 / 3.0, IlluminanceTarget = 500, LightingPowerDensity = 16, EquipmentPowerDensity = 2, OccupancySchedule = "occMeetingRoom", EquipmentAvailibilitySchedule = "equipMeetingRoom", LightsAvailibilitySchedule = "lightsMeetingRoom", Category = "Office", DataSource = "SIA Merkblatt 2024" });
Library.Add(new ZoneConditioning() { Name = "BedroomHeatingCoolingMechVent", HeatingSetpoint = 19, CoolingSetpoint = 26, MechVentIsOn = true, MinFreshAirPerson = 2.5, MinFreshAirArea = 0.3, Category = "Residential" });
Library.Add(new ZoneConditioning() { Name = "KitchenHeatingCoolingMechVent", HeatingSetpoint = 20, CoolingSetpoint = 26, MechVentIsOn = true, MinFreshAirPerson = 3.9, MinFreshAirArea = 0.9, Category = "Residential" });
Library.Add(new ZoneConditioning() { Name = "OfficeHeatingCoolingMechVent", HeatingSetpoint = 20, CoolingSetpoint = 26, MechVentIsOn = true, MinFreshAirPerson = 2.5, MinFreshAirArea = 0.3, Category = "Office" });
Library.Add(new ZoneConditioning() { Name = "MeetingRoomHeatingCoolingMechVent", HeatingSetpoint = 20, CoolingSetpoint = 26, MechVentIsOn = true, MinFreshAirPerson = 3.8, MinFreshAirArea = 0.3, Category = "Office" });
Library.Add(new ZoneConditioning() { Name = "LectureHallHeatingCoolingMechVent", HeatingSetpoint = 20, CoolingSetpoint = 26, MechVentIsOn = true, MinFreshAirPerson = 3.8, MinFreshAirArea = 0.3, Category = "Education" });
Library.Add(new ZoneVentilation() { Name = "PoorAirTightness", InfiltrationIsOn = true, InfiltrationAch = 1.2, InfiltrationModel = InfiltrationModel.Wind, Category = "Infiltration" });
Library.Add(new ZoneVentilation() { Name = "ModerateAirTightness", InfiltrationIsOn = true, InfiltrationAch = 0.5, InfiltrationModel = InfiltrationModel.Wind, Category = "Infiltration" });
Library.Add(new ZoneVentilation() { Name = "GoodAirTightness", InfiltrationIsOn = true, InfiltrationAch = 0.15, InfiltrationModel = InfiltrationModel.Wind, Category = "Infiltration" });
Library.Add(new DomHotWater() { Name = "House" , FlowRatePerFloorArea =0.03 , WaterSchedule = "AllOn" , WaterTemperatureInlet = 10, WaterSupplyTemperature = 60 });
Library.Add(new ZoneConstruction() { Name = "SolidWood", RoofConstruction = "300mmInsulation 94mmSolidWood 24mmGypsum", FacadeConstruction = "300mmInsulation 94mmSolidWood 24mmGypsum", SlabConstruction = "150mmScreedWithImpactSoundInsulation 140mmSolidWood", GroundConstruction = "120mmInsulation 200mmConcrete", PartitionConstruction = "12mmGypsum 78mmSolidWood 12mmGypsum" });
#region SimpleGlass
Library.Add(new GlazingConstructionSimple("SinglePaneClr", "Single pane", "Standard clear", 0.913, 5.894, 0.905));
Library.Add(new GlazingConstructionSimple("DoublePaneClr", "Double pane", "Standard clear", 0.812, 2.720, 0.764));
Library.Add(new GlazingConstructionSimple("DoublePaneLoEe2", "Double pane", "Low emissivity coating on layer e2", 0.444, 1.493, 0.373));
Library.Add(new GlazingConstructionSimple("DoublePaneLoEe3", "Double pane", "Low emissivity coating on layer e3", 0.769, 1.507, 0.649));
Library.Add(new GlazingConstructionSimple("TriplePaneLoE", "Triple pane", "Low emissivity coating on layer e2 and e5", 0.661, 0.785, 0.764));
#endregion
#region ZoneDefTemplates
Library.Add(new WindowSettings());
Library.Add(new ZoneDefinition());
var fl1 = Library.Add(new FloorDefinition() { BuildingID ="Default", Type = "INT", Name= "Default_INT"});
var fl2 = Library.Add(new FloorDefinition() { BuildingID = "Default", Type = "B" , Name= "Default_B" });
var fl3 = Library.Add(new FloorDefinition() { BuildingID = "Default", Type = "G" , Name= "Default_G" });
var fl4 = Library.Add(new FloorDefinition() { BuildingID = "Default", Type = "R" , Name= "Default_R" });
BuildingDefinition b = new BuildingDefinition { Name = "Default" };
b.Floors.Add(fl1);
b.Floors.Add(fl2);
b.Floors.Add(fl3);
b.Floors.Add(fl4);
Library.Add(b);
#endregion
////--------------------------------------------------------------------------------serialization test
//string xml = SerializeDeserialize.Serialize(Library);
//SerializeDeserialize.Deserialize(xml, typeof(ArchsimLib.Lib));
////--------------------------------------------------------------------------------out
return Library;
}
// hardcoded default library
private static Library getHardCodedDefaultLib()
{
Library Library = new Library();
#region DEFAULTS - MUST BE IN LIBRARY
OpaqueMaterial defaultMat = new OpaqueMaterial() {
Name ="defaultMat",
Type ="Concrete",
Conductivity= 2.30,
Density =2400,
SpecificHeat=840,
ThermalEmittance=0.9,
SolarAbsorptance= 0.7,
VisibleAbsorptance=0.7
};
Library.OpaqueMaterials.Add(defaultMat);
GlazingMaterial defaultGMat = new GlazingMaterial() {
Name = "defaultGlazingMat",
Type= "Uncoated",
Conductivity = 0.9,
Density= 2500,
SolarTransmittance =0.68,
SolarReflectanceFront =0.09,
SolarReflectanceBack=0.10,
VisibleTransmittance=0.81,
VisibleReflectanceFront=0.11,
VisibleReflectanceBack=0.12,
IRTransmittance=0.00,
IREmissivityFront=0.84,
IREmissivityBack=0.20
};
Library.GlazingMaterials.Add( defaultGMat);
Layer<OpaqueMaterial> defaultLay = new Layer<OpaqueMaterial>(0.25, defaultMat);
OpaqueConstruction defaultConstruction = new OpaqueConstruction();
defaultConstruction.Layers.Add(defaultLay);
defaultConstruction.Name = "defaultConstruction";
defaultConstruction.Type = ConstructionTypes.Facade;// "Facade";
Library.OpaqueConstructions.Add( defaultConstruction);
Layer<WindowMaterialBase> defaultGLay = new Layer<WindowMaterialBase>(0.006, defaultGMat);
GlazingConstruction defaultGlazing = new GlazingConstruction();
defaultGlazing.Layers.Add(defaultGLay);
defaultGlazing.Name = "defaultGlazing";
defaultGlazing.Type = GlazingConstructionTypes.Single;// "Single";
Library.GlazingConstructions.Add( defaultGlazing);
//AIRWALL
GlazingMaterial AirWallMat = new GlazingMaterial()
{
Name = "100TRANS",
Type = "uncoated",
Conductivity = 5,
Density = 0.0001,
SolarTransmittance = 0.99,
SolarReflectanceFront = 0.005,
SolarReflectanceBack = 0.005,
VisibleTransmittance = 0.99,
VisibleReflectanceFront = 0.005,
VisibleReflectanceBack = 0.005,
IRTransmittance = 0.99,
IREmissivityFront = 0.005,
IREmissivityBack = 0.005
};
Library.GlazingMaterials.Add(AirWallMat);
Layer<WindowMaterialBase> airwallLayer = new Layer<WindowMaterialBase>(0.003, AirWallMat);
GlazingConstruction airWall = new GlazingConstruction();
airWall.Layers.Add(airwallLayer);
airWall.Name = "Airwall";
airWall.Type = GlazingConstructionTypes.Other;// "Other";
Library.GlazingConstructions.Add( airWall);
//---------------------------------------------------------------------------------gases
// add all possible gas materials to GasMaterials
// string[] gases = { "AIR", "ARGON", "KRYPTON", "XENON", "SF6" };
Library.GasMaterials.Clear();
foreach (var s in Enum.GetValues(typeof(GasTypes)).Cast<GasTypes>())
{
Library.GasMaterials.Add(new GasMaterial(s));
}
int[] MonthFrom = { 1 };
int[] DayFrom = { 1 };
int[] MonthTo = { 12 };
int[] DayTo = { 31 };
#region AllOn
double[] hourlyAllOnArr = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
DaySchedule hourlyAllOn = new DaySchedule("hourlyAllOn", "Fraction", hourlyAllOnArr.ToList());
Library.DaySchedules.Add( hourlyAllOn);
DaySchedule[] weekAllOnArr = { hourlyAllOn, hourlyAllOn, hourlyAllOn, hourlyAllOn, hourlyAllOn, hourlyAllOn, hourlyAllOn };
WeekSchedule weekAllOn = new WeekSchedule("weekAllOn", weekAllOnArr, "Fraction");
Library.WeekSchedules.Add( weekAllOn);
WeekSchedule[] snarr = { weekAllOn };
YearSchedule AllOnYear = new YearSchedule("AllOn", "Fraction", snarr.ToList(), MonthFrom.ToList(), DayFrom.ToList(), MonthTo.ToList(), DayTo.ToList());
Library.YearSchedules.Add(AllOnYear);
#endregion
#endregion
double[] a2 = { 1 };
OpaqueMaterial mo2 = new OpaqueMaterial() {
Name = "XPS Board",
Type = "Insulation",
Conductivity = 0.034,
Density = 35,
SpecificHeat = 1400,
ThermalEmittance = 0.9,
SolarAbsorptance = 0.6,
VisibleAbsorptance = 0.6,
EmbodiedEnergy = 87.4,
EmbodiedCarbon = 2.8,
Cost = 0.0,
Comment = ""
};
Library.OpaqueMaterials.Add( mo2);
#region U-WERT.NET OpaqueMaterials
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Pine wood", Type = @"Wood", Conductivity = 0.13, Density = 520, SpecificHeat = 1600, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"[lambda rho c: U-Wert.net]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Douglas fir", Type = @"Wood", Conductivity = 0.12, Density = 530, SpecificHeat = 1600, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"[lambda rho c: U-Wert.net]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Oak", Type = @"Wood", Conductivity = 0.18, Density = 690, SpecificHeat = 2400, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"[lambda rho c: U-Wert.net]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Spruce", Type = @"Wood", Conductivity = 0.13, Density = 450, SpecificHeat = 1600, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"[lambda rho c: U-Wert.net]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Larch", Type = @"Wood", Conductivity = 0.13, Density = 460, SpecificHeat = 1600, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"[lambda rho c: U-Wert.net]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Oriented strand board", Type = @"Wood", Conductivity = 0.13, Density = 650, SpecificHeat = 1700, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"[lambda rho c: U-Wert.net]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Medium density fiberboard", Type = @"Wood", Conductivity = 0.09, Density = 500, SpecificHeat = 1700, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"[lambda rho c: U-Wert.net]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Chipboard", Type = @"Wood", Conductivity = 0.14, Density = 650, SpecificHeat = 1800, ThermalEmittance = 0.9, SolarAbsorptance = 0.7, VisibleAbsorptance = 0.7, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"[lambda rho c: U-Wert.net]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Concrete", Type = @"Concrete", Conductivity = 2, Density = 2400, SpecificHeat = 950, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"U-Wert.net" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Concrete reinforced {1%}", Type = @"Concrete", Conductivity = 2.3, Density = 2300, SpecificHeat = 880, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"U-Wert.net" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Concrete reinforced {2%}", Type = @"Concrete", Conductivity = 2.5, Density = 2400, SpecificHeat = 880, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"U-Wert.net" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Asphalt", Type = @"Screed", Conductivity = 0.7, Density = 2350, SpecificHeat = 920, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"U-Wert.net" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Lightweight concrete", Type = @"Concrete", Conductivity = 1.3, Density = 1800, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"U-Wert.net" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Cement screed", Type = @"Screed", Conductivity = 1.4, Density = 2000, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"U-Wert.net" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Basalt", Type = @"Masonry", Conductivity = 3.5, Density = 2850, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"U-Wert.net" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Granite", Type = @"Masonry", Conductivity = 2.8, Density = 2600, SpecificHeat = 790, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"U-Wert.net" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Lime stone", Type = @"Masonry", Conductivity = 1.4, Density = 2000, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"U-Wert.net" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Adobe 1500kg/m3", Type = @"Masonry", Conductivity = 0.66, Density = 1500, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"U-Wert.net" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Sand stone", Type = @"Masonry", Conductivity = 2.3, Density = 2600, SpecificHeat = 710, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"U-Wert.net" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Clinker brick 1400 kg/m3", Type = @"Masonry", Conductivity = 0.58, Density = 1400, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"U-Wert.net" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Clinker brick 1600 kg/m3", Type = @"Masonry", Conductivity = 0.68, Density = 1600, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"U-Wert.net" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Clinker brick 1800 kg/m3", Type = @"Masonry", Conductivity = 0.81, Density = 1800, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"U-Wert.net" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Clinker brick 2000 kg/m3", Type = @"Masonry", Conductivity = 0.96, Density = 2000, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"U-Wert.net" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Aerated concrete 350kg/m3", Type = @"Masonry", Conductivity = 0.09, Density = 350, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"U-Wert.net" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Aerated concrete 500kg/m3", Type = @"Masonry", Conductivity = 0.12, Density = 500, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"U-Wert.net" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Ytong block W PP 1.6-0.30", Type = @"Masonry", Conductivity = 0.08, Density = 300, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"U-Wert.net" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Poroton Plan-T10", Type = @"Masonry", Conductivity = 0.1, Density = 650, SpecificHeat = 1000, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"U-Wert.net" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Rigid foam EPS 035", Type = @"Insulation", Conductivity = 0.035, Density = 30, SpecificHeat = 1500, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"[lambda rho c: U-Wert.net]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Rigid foam PUR {no coating}", Type = @"Insulation", Conductivity = 0.03, Density = 30, SpecificHeat = 1400, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"[lambda rho c: U-Wert.net]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Rigid foam PUR {alu coating}", Type = @"Insulation", Conductivity = 0.025, Density = 30, SpecificHeat = 1400, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"[lambda rho c: U-Wert.net]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Rigid foam PUR {fleece coating}", Type = @"Insulation", Conductivity = 0.028, Density = 30, SpecificHeat = 1400, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"[lambda rho c: U-Wert.net]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Wood fiber insulating board", Type = @"Insulation", Conductivity = 0.042, Density = 160, SpecificHeat = 2100, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"[lambda rho c: U-Wert.net]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Styrofoam", Type = @"Insulation", Conductivity = 0.04, Density = 20, SpecificHeat = 1500, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"[lambda rho c: U-Wert.net]" });
Library.OpaqueMaterials.Add(new OpaqueMaterial() { Name = @"Vacuum insulation panel Variotec", Type = @"Insulation", Conductivity = 0.007, Density = 205, SpecificHeat = 900, ThermalEmittance = 0.9, SolarAbsorptance = 0.6, VisibleAbsorptance = 0.6, EmbodiedEnergy = 0, EmbodiedCarbon = 0, Cost = 0, Comment = @"[lambda rho c: U-Wert.net]" });
#endregion
//List of premade basic glazing materials/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
double[] a3 = { 1 };
GlazingMaterial gm1 = new GlazingMaterial()
{
Name = "Generic Clear Glass 6mm",
Type = "Uncoated",
Conductivity = 0.9,
Density = 2500,
EmbodiedEnergy = 15,
EmbodiedCarbon = 0.85,
Cost = 0.0,
Comment = "",
SolarTransmittance = 0.68,
SolarReflectanceFront = 0.09,
SolarReflectanceBack = 0.10,
VisibleTransmittance = 0.81,
VisibleReflectanceFront = 0.11,
VisibleReflectanceBack = 0.12,
IRTransmittance = 0.00,
IREmissivityFront = 0.84,
IREmissivityBack = 0.20
};
Library.GlazingMaterials.Add( gm1);
//List of premade basic gas materials/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
//GasMaterial g1 = new GasMaterial("ARGON", "ARGON");
//Library.GasMaterials.Add( g1);
//List of premade basic opaque constructions/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
//Basic wall
Layer<OpaqueMaterial> ol1 = new Layer<OpaqueMaterial>(0.20, defaultMat);
Layer<OpaqueMaterial> ol2 = new Layer<OpaqueMaterial>(0.06, mo2);
OpaqueConstruction oc1 = new OpaqueConstruction();
oc1.Layers.Add(ol1);
oc1.Layers.Add(ol2);
oc1.Name = "Heavy Wall";
oc1.Type = ConstructionTypes.Facade;// "Facade";
Library.OpaqueConstructions.Add( oc1);
//Basic roof
Layer<OpaqueMaterial> ol3 = new Layer<OpaqueMaterial>(0.20, defaultMat);
Layer<OpaqueMaterial> ol4 = new Layer<OpaqueMaterial>(0.12, mo2);
OpaqueConstruction oc2 = new OpaqueConstruction();
oc2.Layers.Add(ol1);
oc2.Layers.Add(ol2);
oc2.Name = "Heavy Roof";
oc2.Type = ConstructionTypes.Roof;// "Roof";
Library.OpaqueConstructions.Add(oc2);
//Basic floor
Layer<OpaqueMaterial> ol5 = new Layer<OpaqueMaterial>(0.20, defaultMat);
OpaqueConstruction oc3 = new OpaqueConstruction();
oc3.Layers.Add(ol1);
oc3.Name = "Heavy Floor";
oc3.Type = ConstructionTypes.InteriorFloor;// "Floor";
Library.OpaqueConstructions.Add( oc3);
//List of premade basic glazing constructions/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
//Basic double glazing
Layer<WindowMaterialBase> go1 = new Layer<WindowMaterialBase>(0.006, gm1);
Layer<WindowMaterialBase> go2 = new Layer<WindowMaterialBase>(0.0013, Library.GasMaterials.Single(o=>o.Name == "ARGON"));
GlazingConstruction gc1 = new GlazingConstruction();
gc1.Layers.Add(go1);
gc1.Layers.Add(go2);
gc1.Layers.Add(go1);
gc1.Name = "DblClear Air 6+13+6";
gc1.Type = GlazingConstructionTypes.Double;// "Double";
Library.GlazingConstructions.Add( gc1);
#region schedules
//--------------------------------------------------------------------------------schedules
double[] occBedroomArr = { 1, 1, 1, 1, 1, 1, 0.8, 0.6, 0.4, 0.4, 0.4, 0.6, 0.8, 0.6, 0.4, 0.4, 0.6, 0.8, 0.8, 0.8, 0.8, 1, 1, 1 };
DaySchedule occBedroom = new DaySchedule("occBedroom", "Fraction", occBedroomArr.ToList());
occBedroom.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(occBedroom);
DaySchedule[] occBedroomWeekArr = { occBedroom, occBedroom, occBedroom, occBedroom, occBedroom, occBedroom, occBedroom };
WeekSchedule occBedroomWeek = new WeekSchedule("occBedroom", occBedroomWeekArr, "Fraction");
occBedroomWeek.DataSource = occBedroom.DataSource;
Library.WeekSchedules.Add(occBedroomWeek);
WeekSchedule[] occBedroomYrArr = { occBedroomWeek };
YearSchedule occBedroomYr = new YearSchedule("occBedroom", "Fraction", occBedroomYrArr.ToList(), MonthFrom.ToList(), DayFrom.ToList(), MonthTo.ToList(), DayTo.ToList());
occBedroomYr.DataSource = occBedroom.DataSource;
Library.YearSchedules.Add(occBedroomYr);
double[] equipBedroomArr = { 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.5, 1, 0.5 , 0.5, 0.5, 1, 1, 0.5, 0.5, 0.5, 1, 1, 1, 1, 0.5, 0.5, 0.5, 0.1 };
DaySchedule equipBedroom = new DaySchedule("equipBedroom", "Fraction", equipBedroomArr.ToList());
equipBedroom.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(equipBedroom);
DaySchedule[] equipBedroomWeekArr = { equipBedroom, equipBedroom, equipBedroom, equipBedroom, equipBedroom, equipBedroom, equipBedroom };
WeekSchedule equipBedroomWeek = new WeekSchedule("equipBedroom", equipBedroomWeekArr, "Fraction");
equipBedroomWeek.DataSource = equipBedroom.DataSource;
Library.WeekSchedules.Add(equipBedroomWeek);
WeekSchedule[] equipBedroomYrArr = { equipBedroomWeek };
YearSchedule equipBedroomYr = new YearSchedule("equipBedroom", "Fraction", equipBedroomYrArr.ToList(), MonthFrom.ToList(), DayFrom.ToList(), MonthTo.ToList(), DayTo.ToList());
equipBedroomYr.DataSource = equipBedroom.DataSource;
Library.YearSchedules.Add(equipBedroomYr);
double[] occKitchenArr = { 0, 0, 0, 0, 0, 0, 0.4, 0.8, 0.4, 0, 0, 0.4, 0.8, 0.4, 0, 0, 0.4, 1, 0.6, 0.4, 0, 0, 0, 0 };
DaySchedule occKitchen = new DaySchedule("occKitchen", "Fraction", occKitchenArr.ToList());
occKitchen.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(occKitchen);
DaySchedule[] occKitchenWeekArr = { occKitchen, occKitchen, occKitchen, occKitchen, occKitchen, occKitchen, occKitchen };
WeekSchedule occKitchenWeek = new WeekSchedule("occKitchen", occKitchenWeekArr, "Fraction");
occKitchenWeek.DataSource = occKitchen.DataSource;
Library.WeekSchedules.Add(occKitchenWeek);
WeekSchedule[] occKitchenYrArr = { occKitchenWeek };
YearSchedule occKitchenYr = new YearSchedule("occKitchen", "Fraction", occKitchenYrArr.ToList(), MonthFrom.ToList(), DayFrom.ToList(), MonthTo.ToList(), DayTo.ToList());
occKitchenYr.DataSource = occKitchen.DataSource;
Library.YearSchedules.Add(occKitchenYr);
double[] equipmentKitchenArr = { 0.2, 0.2, 0.2, 0.2, 0.2, 0.2, 0.4, 0.8, 0.4, 0.2, 0.2, 0.4, 1, 0.4, 0.2, 0.2, 0.4, 1, 0.4, 0.2, 0.2, 0.2, 0.2, 0.2 };
DaySchedule equipmentKitchen = new DaySchedule("equipmentKitchen", "Fraction", equipmentKitchenArr.ToList());
equipmentKitchen.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(equipmentKitchen);
DaySchedule[] equipmentKitchenWeekArr = { equipmentKitchen, equipmentKitchen, equipmentKitchen, equipmentKitchen, equipmentKitchen, equipmentKitchen, equipmentKitchen };
WeekSchedule equipmentKitchenWeek = new WeekSchedule("equipmentKitchen", equipmentKitchenWeekArr, "Fraction");
equipmentKitchenWeek.DataSource = equipmentKitchen.DataSource;
Library.WeekSchedules.Add(equipmentKitchenWeek);
WeekSchedule[] equipmentKitchenYrArr = { equipmentKitchenWeek };
YearSchedule equipmentKitchenYr = new YearSchedule("equipmentKitchen", "Fraction", equipmentKitchenYrArr.ToList(), MonthFrom.ToList(), DayFrom.ToList(), MonthTo.ToList(), DayTo.ToList());
equipmentKitchenYr.DataSource = equipmentKitchen.DataSource;
Library.YearSchedules.Add(equipmentKitchenYr);
double[] occOfficeArr = { 0, 0, 0, 0, 0, 0, 0, 0.2, 0.4, 0.6, 0.8, 0.8, 0.4, 0.6, 0.8, 0.8, 0.4, 0.2, 0, 0, 0, 0, 0, 0 };
DaySchedule occOffice = new DaySchedule("occOffice", "Fraction", occOfficeArr.ToList());
occOffice.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(occOffice);
double[] occOfficeArrWE = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
DaySchedule occOfficeWE = new DaySchedule("occOffice", "Fraction", occOfficeArr.ToList());
occOfficeWE.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(occOfficeWE);
DaySchedule[] occOfficeWeekArr = { occOffice, occOffice, occOffice, occOffice, occOffice, occOfficeWE, occOfficeWE };
WeekSchedule occOfficeWeek = new WeekSchedule("occOffice", occOfficeWeekArr, "Fraction");
occOfficeWeek.DataSource = occOffice.DataSource;
Library.WeekSchedules.Add(occOfficeWeek);
WeekSchedule[] occOfficeYrArr = { occOfficeWeek };
YearSchedule occOfficeYr = new YearSchedule("occOffice", "Fraction", occOfficeYrArr.ToList(), MonthFrom.ToList(), DayFrom.ToList(), MonthTo.ToList(), DayTo.ToList());
occOfficeYr.DataSource = occOffice.DataSource;
Library.YearSchedules.Add(occOfficeYr);
double[] equipmentOfficeArr = { 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.2, 0.4, 0.6, 0.8, 0.8, 0.4, 0.6, 0.8, 0.8, 0.4, 0.2, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1 };
DaySchedule equipmentOffice = new DaySchedule("equipmentOffice", "Fraction", equipmentOfficeArr.ToList());
equipmentOffice.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(equipmentOffice);
double[] equipmentOfficeArrWE = { 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1 };
DaySchedule equipmentOfficeWE = new DaySchedule("equipmentOffice", "Fraction", equipmentOfficeArr.ToList());
equipmentOfficeWE.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(equipmentOfficeWE);
DaySchedule[] equipmentOfficeWeekArr = { equipmentOffice, equipmentOffice, equipmentOffice, equipmentOffice, equipmentOffice, equipmentOfficeWE, equipmentOfficeWE };
WeekSchedule equipmentOfficeWeek = new WeekSchedule("equipmentOffice", equipmentOfficeWeekArr, "Fraction");
equipmentOfficeWeek.DataSource = equipmentOffice.DataSource;
Library.WeekSchedules.Add(equipmentOfficeWeek);
WeekSchedule[] equipmentOfficeYrArr = { equipmentOfficeWeek };
YearSchedule equipmentOfficeYr = new YearSchedule("equipmentOffice", "Fraction", equipmentOfficeYrArr.ToList(), MonthFrom.ToList(), DayFrom.ToList(), MonthTo.ToList(), DayTo.ToList());
equipmentOfficeYr.DataSource = equipmentOffice.DataSource;
Library.YearSchedules.Add(equipmentOfficeYr);
double[] occMeetingRoomArr = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0.6, 1, 0.4, 0, 0, 0.6, 1, 0.4, 0, 0, 0, 0, 0, 0, 0 };
DaySchedule occMeetingRoom = new DaySchedule("occMeetingRoom", "Fraction", occMeetingRoomArr.ToList());
occMeetingRoom.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(occMeetingRoom);
double[] occMeetingRoomArrWE = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
DaySchedule occMeetingRoomWE = new DaySchedule("occMeetingRoom", "Fraction", occMeetingRoomArr.ToList());
occMeetingRoomWE.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(occMeetingRoomWE);
DaySchedule[] occMeetingRoomWeekArr = { occMeetingRoom, occMeetingRoom, occMeetingRoom, occMeetingRoom, occMeetingRoom, occMeetingRoomWE, occMeetingRoomWE };
WeekSchedule occMeetingRoomWeek = new WeekSchedule("occMeetingRoom", occMeetingRoomWeekArr, "Fraction");
occMeetingRoomWeek.DataSource = occMeetingRoom.DataSource;
Library.WeekSchedules.Add(occMeetingRoomWeek);
WeekSchedule[] occMeetingRoomYrArr = { occMeetingRoomWeek };
YearSchedule occMeetingRoomYr = new YearSchedule("occMeetingRoom", "Fraction", occMeetingRoomYrArr.ToList(), MonthFrom.ToList(), DayFrom.ToList(), MonthTo.ToList(), DayTo.ToList());
occMeetingRoomYr.DataSource = occMeetingRoom.DataSource;
Library.YearSchedules.Add(occMeetingRoomYr);
double[] equipmentMeetingRoomArr = { 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.6, 1, 0.4, 0.1, 0.1, 0.6, 1, 0.4, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1 };
DaySchedule equipmentMeetingRoom = new DaySchedule("equipmentMeetingRoom", "Fraction", equipmentMeetingRoomArr.ToList());
equipmentMeetingRoom.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(equipmentMeetingRoom);
double[] equipmentMeetingRoomArrWE = { 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1 };
DaySchedule equipmentMeetingRoomWE = new DaySchedule("equipmentMeetingRoom", "Fraction", equipmentMeetingRoomArr.ToList());
equipmentMeetingRoomWE.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(equipmentMeetingRoomWE);
DaySchedule[] equipmentMeetingRoomWeekArr = { equipmentMeetingRoom, equipmentMeetingRoom, equipmentMeetingRoom, equipmentMeetingRoom, equipmentMeetingRoom, equipmentMeetingRoomWE, equipmentMeetingRoomWE };
WeekSchedule equipmentMeetingRoomWeek = new WeekSchedule("equipmentMeetingRoom", equipmentMeetingRoomWeekArr, "Fraction");
equipmentMeetingRoomWeek.DataSource = equipmentMeetingRoom.DataSource;
Library.WeekSchedules.Add(equipmentMeetingRoomWeek);
WeekSchedule[] equipmentMeetingRoomYrArr = { equipmentMeetingRoomWeek };
YearSchedule equipmentMeetingRoomYr = new YearSchedule("equipmentMeetingRoom", "Fraction", equipmentMeetingRoomYrArr.ToList(), MonthFrom.ToList(), DayFrom.ToList(), MonthTo.ToList(), DayTo.ToList());
equipmentMeetingRoomYr.DataSource = equipmentMeetingRoom.DataSource;
Library.YearSchedules.Add(equipmentMeetingRoomYr);
double[] occLibraryArr = { 0, 0, 0, 0, 0, 0, 0, 0.2, 0.6, 1, 1, 0.2, 0.2, 1, 1, 0.6, 0.2, 0, 0, 0, 0, 0, 0, 0 };
DaySchedule occLibrary = new DaySchedule("occLibrary", "Fraction", occLibraryArr.ToList());
occLibrary.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(occLibrary);
DaySchedule[] occLibraryWeekArr = { occLibrary, occLibrary, occLibrary, occLibrary, occLibrary, occLibrary, occLibrary };
WeekSchedule occLibraryWeek = new WeekSchedule("occLibrary", occLibraryWeekArr, "Fraction");
occLibraryWeek.DataSource = occLibrary.DataSource;
Library.WeekSchedules.Add(occLibraryWeek);
WeekSchedule[] occLibraryYrArr = { occLibraryWeek };
YearSchedule occLibraryYr = new YearSchedule("occLibrary", "Fraction", occLibraryYrArr.ToList(), MonthFrom.ToList(), DayFrom.ToList(), MonthTo.ToList(), DayTo.ToList());
occLibraryYr.DataSource = occLibrary.DataSource;
Library.YearSchedules.Add(occLibraryYr);
double[] equipmentLibraryArr = { 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.2, 0.6, 1, 1, 0.2, 0.2, 1, 1, 0.6, 0.4, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1 };
DaySchedule equipmentLibrary = new DaySchedule("equipmentLibrary", "Fraction", equipmentLibraryArr.ToList());
equipmentLibrary.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(equipmentLibrary);
DaySchedule[] equipmentLibraryWeekArr = { equipmentLibrary, equipmentLibrary, equipmentLibrary, equipmentLibrary, equipmentLibrary, equipmentLibrary, equipmentLibrary };
WeekSchedule equipmentLibraryWeek = new WeekSchedule("equipmentLibrary", equipmentLibraryWeekArr, "Fraction");
equipmentLibraryWeek.DataSource = equipmentLibrary.DataSource;
Library.WeekSchedules.Add(equipmentLibraryWeek);
WeekSchedule[] equipmentLibraryYrArr = { equipmentLibraryWeek };
YearSchedule equipmentLibraryYr = new YearSchedule("equipmentLibrary", "Fraction", equipmentLibraryYrArr.ToList(), MonthFrom.ToList(), DayFrom.ToList(), MonthTo.ToList(), DayTo.ToList());
equipmentLibraryYr.DataSource = equipmentLibrary.DataSource;
Library.YearSchedules.Add(equipmentLibraryYr);
double[] occLectureHallArr = { 0, 0, 0, 0, 0, 0, 0, 0.2, 0.6, 1, 1, 0.2, 0.2, 1, 1, 0.6, 0.2, 0, 0, 0, 0, 0, 0, 0 };
DaySchedule occLectureHall = new DaySchedule("occLectureHall", "Fraction", occLectureHallArr.ToList());
occLectureHall.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(occLectureHall);
double[] occLectureHallArrWE = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
DaySchedule occLectureHallWE = new DaySchedule("occLectureHall", "Fraction", occLectureHallArr.ToList());
occLectureHallWE.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(occLectureHallWE);
DaySchedule[] occLectureHallWeekArr = { occLectureHall, occLectureHall, occLectureHall, occLectureHall, occLectureHall, occLectureHallWE, occLectureHallWE };
WeekSchedule occLectureHallWeek = new WeekSchedule("occLectureHall", occLectureHallWeekArr, "Fraction");
occLectureHallWeek.DataSource = occLectureHall.DataSource;
Library.WeekSchedules.Add(occLectureHallWeek);
WeekSchedule[] occLectureHallYrArr = { occLectureHallWeek };
YearSchedule occLectureHallYr = new YearSchedule("occLectureHall", "Fraction", occLectureHallYrArr.ToList(), MonthFrom.ToList(), DayFrom.ToList(), MonthTo.ToList(), DayTo.ToList());
occLectureHallYr.DataSource = occLectureHall.DataSource;
Library.YearSchedules.Add(occLectureHallYr);
double[] equipmentLectureHallArr = { 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.2, 0.6, 1, 1, 0.2, 0.2, 1, 1, 0.6, 0.4, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1 };
DaySchedule equipmentLectureHall = new DaySchedule("equipmentLectureHall", "Fraction", equipmentLectureHallArr.ToList());
equipmentLectureHall.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(equipmentLectureHall);
double[] equipmentLectureHallArrWE = { 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 1, 1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1 };
DaySchedule equipmentLectureHallWE = new DaySchedule("equipmentLectureHall", "Fraction", equipmentLectureHallArr.ToList());
equipmentLectureHallWE.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(equipmentLectureHallWE);
DaySchedule[] equipmentLectureHallWeekArr = { equipmentLectureHall, equipmentLectureHall, equipmentLectureHall, equipmentLectureHall, equipmentLectureHall, equipmentLectureHallWE, equipmentLectureHallWE };
WeekSchedule equipmentLectureHallWeek = new WeekSchedule("equipmentLectureHall", equipmentLectureHallWeekArr, "Fraction");
equipmentLectureHallWeek.DataSource = equipmentLectureHall.DataSource;
Library.WeekSchedules.Add(equipmentLectureHallWeek);
WeekSchedule[] equipmentLectureHallYrArr = { equipmentLectureHallWeek };
YearSchedule equipmentLectureHallYr = new YearSchedule("equipmentLectureHall", "Fraction", equipmentLectureHallYrArr.ToList(), MonthFrom.ToList(), DayFrom.ToList(), MonthTo.ToList(), DayTo.ToList());
equipmentLectureHallYr.DataSource = equipmentLectureHall.DataSource;
Library.YearSchedules.Add(equipmentLectureHallYr);
double[] occSuperMarketArr = { 0, 0, 0, 0, 0, 0, 0, 0.2, 0.4, 0.4, 0.4, 0.6, 0.6, 0.6, 0.4, 0.4, 0.6, 0.8, 0.6, 0, 0, 0, 0, 0 };
DaySchedule occSuperMarket = new DaySchedule("occSuperMarket", "Fraction", occSuperMarketArr.ToList());
occSuperMarket.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(occSuperMarket);
DaySchedule[] occSuperMarketWeekArr = { occSuperMarket, occSuperMarket, occSuperMarket, occSuperMarket, occSuperMarket, occSuperMarket, occSuperMarket };
WeekSchedule occSuperMarketWeek = new WeekSchedule("occSuperMarket", occSuperMarketWeekArr, "Fraction");
occSuperMarketWeek.DataSource = occSuperMarket.DataSource;
Library.WeekSchedules.Add(occSuperMarketWeek);
WeekSchedule[] occSuperMarketYrArr = { occSuperMarketWeek };
YearSchedule occSuperMarketYr = new YearSchedule("occSuperMarket", "Fraction", occSuperMarketYrArr.ToList(), MonthFrom.ToList(), DayFrom.ToList(), MonthTo.ToList(), DayTo.ToList());
occSuperMarketYr.DataSource = occSuperMarket.DataSource;
Library.YearSchedules.Add(occSuperMarketYr);
double[] equipmentSuperMarketArr = { 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0.1, 0.1, 0.1, 0.1, 0.1 };
DaySchedule equipmentSuperMarket = new DaySchedule("equipmentSuperMarket", "Fraction", equipmentSuperMarketArr.ToList());
equipmentSuperMarket.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(equipmentSuperMarket);
DaySchedule[] equipmentSuperMarketWeekArr = { equipmentSuperMarket, equipmentSuperMarket, equipmentSuperMarket, equipmentSuperMarket, equipmentSuperMarket, equipmentSuperMarket, equipmentSuperMarket };
WeekSchedule equipmentSuperMarketWeek = new WeekSchedule("equipmentSuperMarket", equipmentSuperMarketWeekArr, "Fraction");
equipmentSuperMarketWeek.DataSource = equipmentSuperMarket.DataSource;
Library.WeekSchedules.Add(equipmentSuperMarketWeek);
WeekSchedule[] equipmentSuperMarketYrArr = { equipmentSuperMarketWeek };
YearSchedule equipmentSuperMarketYr = new YearSchedule("equipmentSuperMarket", "Fraction", equipmentSuperMarketYrArr.ToList(), MonthFrom.ToList(), DayFrom.ToList(), MonthTo.ToList(), DayTo.ToList());
equipmentSuperMarketYr.DataSource = equipmentSuperMarket.DataSource;
Library.YearSchedules.Add(equipmentSuperMarketYr);
double[] occShoppingArr = { 0, 0, 0, 0, 0, 0, 0, 0.2, 0.4, 0.4, 0.4, 0.6, 0.6, 0.6, 0.4, 0.4, 0.6, 0.8, 0.6, 0, 0, 0, 0, 0 };
DaySchedule occShopping = new DaySchedule("occShopping", "Fraction", occShoppingArr.ToList());
occShopping.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(occShopping);
DaySchedule[] occShoppingWeekArr = { occShopping, occShopping, occShopping, occShopping, occShopping, occShopping, occShopping };
WeekSchedule occShoppingWeek = new WeekSchedule("occShopping", occShoppingWeekArr, "Fraction");
occShoppingWeek.DataSource = occShopping.DataSource;
Library.WeekSchedules.Add(occShoppingWeek);
WeekSchedule[] occShoppingYrArr = { occShoppingWeek };
YearSchedule occShoppingYr = new YearSchedule("occShopping", "Fraction", occShoppingYrArr.ToList(), MonthFrom.ToList(), DayFrom.ToList(), MonthTo.ToList(), DayTo.ToList());
occShoppingYr.DataSource = occShopping.DataSource;
Library.YearSchedules.Add(occShoppingYr);
double[] equipmentShoppingArr = { 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0.1, 0.1, 0.1, 0.1, 0.1 };
DaySchedule equipmentShopping = new DaySchedule("equipmentShopping", "Fraction", equipmentShoppingArr.ToList());
equipmentShopping.DataSource = "SIA Merkblatt 2024";
Library.DaySchedules.Add(equipmentShopping);
DaySchedule[] equipmentShoppingWeekArr = { equipmentShopping, equipmentShopping, equipmentShopping, equipmentShopping, equipmentShopping, equipmentShopping, equipmentShopping };
WeekSchedule equipmentShoppingWeek = new WeekSchedule("equipmentShopping", equipmentShoppingWeekArr, "Fraction");
equipmentShoppingWeek.DataSource = equipmentShopping.DataSource;
Library.WeekSchedules.Add(equipmentShoppingWeek);
WeekSchedule[] equipmentShoppingYrArr = { equipmentShoppingWeek };
YearSchedule equipmentShoppingYr = new YearSchedule("equipmentShopping", "Fraction", equipmentShoppingYrArr.ToList(), MonthFrom.ToList(), DayFrom.ToList(), MonthTo.ToList(), DayTo.ToList());
equipmentShoppingYr.DataSource = equipmentShopping.DataSource;
Library.YearSchedules.Add(equipmentShoppingYr);
#endregion
//double[] ones241 = { 0, 0, 0, 0.5, 0.8, 1, 1, 1, 1, 1, 1, 1, 1, 0.8, 0.5, 0, 0, 0, 0, 0, 0, 0,1,1 };
//DaySchedule AllOnDay1 = new DaySchedule("Profile", "Fraction", ones241.ToList());
//Library.DaySchedules.Add(AllOnDay1.Name, AllOnDay1);
//double[] ones242 = { 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22 };
//DaySchedule AllOnDay2 = new DaySchedule("SetPoint", "Temperature", ones242.ToList());
//Library.DaySchedules.Add(AllOnDay2.Name, AllOnDay2);
#region SetBackScheduleOffice
//double[] hourlySetBackScheduleOfficeArrWE = { 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12 };
//DaySchedule hourlySetBackScheduleOfficeWE = new DaySchedule("hourlySetBackScheduleOfficeWE", "Temperature", hourlySetBackScheduleOfficeArrWE.ToList());
//Library.DaySchedules.Add(hourlySetBackScheduleOfficeWE.Name, hourlySetBackScheduleOfficeWE);
//double[] hourlySetBackScheduleOfficeArr = { 12, 12, 12, 12, 12, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 12, 12, 12, 12, 12, 12 };
//DaySchedule hourlySetBackScheduleOffice = new DaySchedule("hourlySetBackScheduleOffice", "Temperature", hourlySetBackScheduleOfficeArr.ToList());
//Library.DaySchedules.Add(hourlySetBackScheduleOffice.Name, hourlySetBackScheduleOffice);
//string[] weekSetBackScheduleOfficeArr = { "hourlySetBackScheduleOffice", "hourlySetBackScheduleOffice", "hourlySetBackScheduleOffice", "hourlySetBackScheduleOffice", "hourlySetBackScheduleOffice", "hourlySetBackScheduleOfficeWE", "hourlySetBackScheduleOfficeWE" };
//WeekSchedule weekSetBackScheduleOffice = new WeekSchedule("weekSetBackScheduleOffice", weekSetBackScheduleOfficeArr, "Temperature");
//Library.WeekSchedules.Add(weekSetBackScheduleOffice.Name, weekSetBackScheduleOffice);
//string[] yearSetBackScheduleOfficeArr = { "weekSetBackScheduleOffice" };
//int[] yearSetBackScheduleOfficeMonthFrom = { 1 };
//int[] yearSetBackScheduleOfficeDayFrom = { 1 };
//int[] yearSetBackScheduleOfficeMonthTo = { 12 };
//int[] yearSetBackScheduleOfficeDayTo = { 31 };
//YearSchedule yearSetBackScheduleOffice = new YearSchedule("SetBackScheduleOffice", "Temperature", yearSetBackScheduleOfficeArr.ToList(), yearSetBackScheduleOfficeMonthFrom.ToList(), yearSetBackScheduleOfficeDayFrom.ToList(), yearSetBackScheduleOfficeMonthTo.ToList(), yearSetBackScheduleOfficeDayTo.ToList());
//Library.YearSchedules.Add(yearSetBackScheduleOffice.Name, yearSetBackScheduleOffice);
#endregion
#region ResidentialOccOcc
double[] hourlyResidentialOccWEArr = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 0.5, 1, 1, 1, 1, 1, 1 };
DaySchedule hourlyResidentialOccWE = new DaySchedule("hourlyResidentialOccWE", "Fraction", hourlyResidentialOccWEArr.ToList());
Library.DaySchedules.Add( hourlyResidentialOccWE);
double[] hourlyResidentialOccArr = { 1, 1, 1, 1, 1, 1, 1, 0.5, 0.25, 0, 0, 0, 0, 0, 0, 0, 0, 0.25, 0.5, 1, 1, 1, 1, 1 };
DaySchedule hourlyResidentialOcc = new DaySchedule("hourlyResidentialOcc", "Fraction", hourlyResidentialOccArr.ToList());
Library.DaySchedules.Add( hourlyResidentialOcc);
DaySchedule[] weekResidentialOccArr = { hourlyResidentialOcc, hourlyResidentialOcc, hourlyResidentialOcc, hourlyResidentialOcc, hourlyResidentialOcc, hourlyResidentialOccWE, hourlyResidentialOccWE };
WeekSchedule weekResidentialOcc = new WeekSchedule("weekResidentialOcc", weekResidentialOccArr, "Fraction");
Library.WeekSchedules.Add( weekResidentialOcc);
WeekSchedule[] yearResidentialOccArr = { weekResidentialOcc };
int[] yearResidentialOccMonthFrom = { 1 };
int[] yearResidentialOccDayFrom = { 1 };
int[] yearResidentialOccMonthTo = { 12 };
int[] yearResidentialOccDayTo = { 31 };
YearSchedule ResidentialOcc = new YearSchedule("ResidentialOcc", "Fraction", yearResidentialOccArr.ToList(), yearResidentialOccMonthFrom.ToList(), yearResidentialOccDayFrom.ToList(), yearResidentialOccMonthTo.ToList(), yearResidentialOccDayTo.ToList());
Library.YearSchedules.Add(ResidentialOcc);
#endregion
#region OpenOfficeOcc
double[] hourlyOpenOfficeOccWEArr = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
DaySchedule hourlyOpenOfficeOccWE = new DaySchedule("hourlyOpenOfficeOccWE", "Fraction", hourlyOpenOfficeOccWEArr.ToList());
Library.DaySchedules.Add(hourlyOpenOfficeOccWE);
double[] hourlyOpenOfficeOccArr = { 0, 0, 0, 0, 0, 0, 0.25, 0.5, 1, 1, 1, 0.75, 0.75, 0.75, 1, 1, 1, 0.5, 0.25, 0, 0, 0, 0, 0 };
DaySchedule hourlyOpenOfficeOcc = new DaySchedule("hourlyOpenOfficeOcc", "Fraction", hourlyOpenOfficeOccArr.ToList());
Library.DaySchedules.Add( hourlyOpenOfficeOcc);
DaySchedule[] weekOpenOfficeOccArr = { hourlyOpenOfficeOcc, hourlyOpenOfficeOcc, hourlyOpenOfficeOcc, hourlyOpenOfficeOcc, hourlyOpenOfficeOcc, hourlyOpenOfficeOcc, hourlyOpenOfficeOcc };
WeekSchedule weekOpenOfficeOcc = new WeekSchedule("weekOpenOfficeOcc", weekOpenOfficeOccArr, "Fraction");
Library.WeekSchedules.Add( weekOpenOfficeOcc);
WeekSchedule[] yearOpenOfficeOccArr = { weekOpenOfficeOcc };
int[] yearOpenOfficeOccMonthFrom = { 1 };
int[] yearOpenOfficeOccDayFrom = { 1 };
int[] yearOpenOfficeOccMonthTo = { 12 };
int[] yearOpenOfficeOccDayTo = { 31 };
YearSchedule OpenOfficeOcc = new YearSchedule("OpenOfficeOcc", "Fraction", yearOpenOfficeOccArr.ToList(), yearOpenOfficeOccMonthFrom.ToList(), yearOpenOfficeOccDayFrom.ToList(), yearOpenOfficeOccMonthTo.ToList(), yearOpenOfficeOccDayTo.ToList());
Library.YearSchedules.Add( OpenOfficeOcc);
#endregion
#region SimpleGlass
Library.GlazingConstructionsSimple.Add(new GlazingConstructionSimple("SinglePaneClr", "Single pane", "Standard clear", 0.913, 5.894, 0.905));
Library.GlazingConstructionsSimple.Add(new GlazingConstructionSimple("DoublePaneClr", "Double pane", "Standard clear", 0.812, 2.720, 0.764));
Library.GlazingConstructionsSimple.Add(new GlazingConstructionSimple("DoublePaneLoEe2", "Double pane", "Low emissivity coating on layer e2", 0.444, 1.493, 0.373));
Library.GlazingConstructionsSimple.Add(new GlazingConstructionSimple("DoublePaneLoEe3", "Double pane", "Low emissivity coating on layer e3", 0.769, 1.507, 0.649));
Library.GlazingConstructionsSimple.Add(new GlazingConstructionSimple("TriplePaneLoE", "Triple pane", "Low emissivity coating on layer e2 and e5", 0.661, 0.785, 0.764));
#endregion
#region ZoneLoadTemplates
#endregion
////--------------------------------------------------------------------------------serialization test
//string xml = SerializeDeserialize.Serialize(Library);
//SerializeDeserialize.Deserialize(xml, typeof(ArchsimLib.Lib));
////--------------------------------------------------------------------------------out
return Library;
}
