//--------------------------------------------------------------------------------------------------
void _OnFaceSelected(SelectSubshapeAction selectAction)
{
if (selectAction.SelectedSubshapeType == SubshapeTypes.Face)
{
var face = TopoDS.Face(selectAction.SelectedSubshape);
var brepAdaptor = new BRepAdaptor_Surface(face, true);
if (brepAdaptor.GetGeomType() != GeomAbs_SurfaceType.GeomAbs_Plane &&
brepAdaptor.GetGeomType() != GeomAbs_SurfaceType.GeomAbs_Cylinder &&
brepAdaptor.GetGeomType() != GeomAbs_SurfaceType.GeomAbs_Cone)
{
StatusText = "Selected face is not a plane, cylinder or cone type surface.";
selectAction.Reset();
return;
}
selectAction.Stop();
_TargetFace = face;
_Phase = Phase.BaseEdgeOrVertex;
_SubshapesOfFace = new List <TopoDS_Shape>();
var edges = face.Edges().Where(
edge =>
{
var analysis = new ShapeAnalysis_Edge();
return(!analysis.IsSeam(edge, face));
}).ToList();
_SubshapesOfFace.AddRange(edges);
var vertices = face.Vertices().Where(
vertex =>
{
var vertexEdges = edges.Where(edge => edge.Vertices().ContainsSame(vertex));
return(vertexEdges.Count() > 1);
});
_SubshapesOfFace.AddRange(vertices);
var newAction = new SelectSubshapeAction(this, _SubshapesOfFace);
if (!WorkspaceController.StartToolAction(newAction))
{
Stop();
return;
}
newAction.Previewed += _OnActionPreview;
newAction.Finished += _OnActionFinished;
StatusText = "Select base edge or vertex to define direction of taper.";
WorkspaceController.HudManager?.SetCursor(Cursors.SelectEdge);
}
}
/// <summary>
/// Returns 1 if the point is outside te face and -1 is inside or on the face.
/// </summary>
/// <param name = "point"></param>
/// <returns></returns>
private int GetDirection(gpPnt point)
{
var direction = 1;
if (_selectedNodes[0].ShapeType == TopAbsShapeEnum.TopAbs_FACE)
{
var face = TopoDS.Face(_selectedNodes[0].Node.Get <TopoDsShapeInterpreter>().Shape);
var classifier = new IntToolsContext();
if (classifier.IsValidPointForFace(point, face, Precision.Confusion))
{
direction = -1;
}
}
return(direction);
}
public static TopoDSShape ExtractSubShape(
TopoDSShape originalShape,
int facePosition,
TopAbsShapeEnum shapeType)
{
if (originalShape == null)
{
return(null);
}
// Find the face
var baseEx = new TopExpExplorer();
baseEx.Init(originalShape, shapeType, TopAbsShapeEnum.TopAbs_SHAPE);
while (baseEx.More && (facePosition != 1))
{
baseEx.Next();
facePosition--;
}
//if (!baseEx.More())
// return null;
TopoDSShape shape = null;
switch (shapeType)
{
case TopAbsShapeEnum.TopAbs_VERTEX:
shape = TopoDS.Vertex(baseEx.Current);
break;
case TopAbsShapeEnum.TopAbs_EDGE:
shape = TopoDS.Edge(baseEx.Current);
break;
case TopAbsShapeEnum.TopAbs_WIRE:
shape = TopoDS.Wire(baseEx.Current);
break;
case TopAbsShapeEnum.TopAbs_FACE:
shape = TopoDS.Face(baseEx.Current);
break;
case TopAbsShapeEnum.TopAbs_SOLID:
case TopAbsShapeEnum.TopAbs_COMPOUND:
return(originalShape);
}
return(shape);
}
public override bool Execute()
{
var draftedShape = Dependency[0].ReferedShape;
var draftedFace = TopoDS.Face(Dependency[0].ReferenceData.TargetShape());
var draftReferenceShape = Dependency[1].ReferenceData.TargetShape();
Ensure.IsTrue(draftReferenceShape.ShapeType == TopAbsShapeEnum.TopAbs_FACE);
var draftReferenceFace = TopoDS.Face(draftReferenceShape);
var draftDirection = GeomUtils.ExtractDirection(draftReferenceFace).Reversed;
var angle = Dependency[3].Real;
if (Math.Abs(angle) < Precision.Angular)
{
return(false);
}
var neutralPlaneNormal = Dependency[2].Axis3D.GpAxis;
var neutralPlane = new gpPln(neutralPlaneNormal.Location, neutralPlaneNormal.Direction);
var draft = new BRepOffsetAPIDraftAngle(draftedShape);
var draftSuceeded = BuildFaceDraft(draft, draftedFace, draftDirection, angle, neutralPlane);
if (!draftSuceeded)
{
return(false);
}
draft.Build();
if (!draft.IsDone)
{
return(false);
}
if (draft.Status != DraftErrorStatus.Draft_NoError)
{
return(false);
}
var refNode = Dependency[0].Reference;
NodeUtils.Hide(refNode);
Shape = draft.Shape;
return(true);
}
//--------------------------------------------------------------------------------------------------
void _OnActionFinished(ToolAction toolAction)
{
bool finished = false;
var selectAction = toolAction as SelectSubshapeAction;
Debug.Assert(selectAction != null);
if (selectAction.SelectedSubshapeType == SubshapeTypes.Face)
{
var face = TopoDS.Face(selectAction.SelectedSubshape);
selectAction.Stop();
Stop();
finished = true;
var faceRef = _TargetShape.GetSubshapeReference(_TargetShape.GetTransformedBRep(), face);
if (faceRef == null)
{
Messages.Error("A subshape reference could not be produced for this face.");
return;
}
if (_Mode == ToolMode.CreateNew)
{
// Create new
var extrude = Extrude.Create(_TargetBody, faceRef);
if (extrude != null)
{
InteractiveContext.Current.UndoHandler.Commit();
InteractiveContext.Current.WorkspaceController.Selection.SelectEntity(_TargetBody);
}
}
else if (_Mode == ToolMode.ReselectFace)
{
// Reselected face
_ExtrudeToChange.Face = faceRef;
_ExtrudeToChange.Invalidate();
InteractiveContext.Current.UndoHandler.Commit();
}
}
if (!finished)
{
selectAction.Reset();
}
WorkspaceController.Invalidate();
}
//--------------------------------------------------------------------------------------------------
void _SelectFaceAction_OnFinished(ToolAction toolaction)
{
Debug.Assert(toolaction == _SelectFaceAction);
if (_SelectFaceAction.SelectedSubshapeType == SubshapeTypes.Face)
{
var face = TopoDS.Face(_SelectFaceAction.SelectedSubshape);
var brepAdaptor = new BRepAdaptor_Surface(face, true);
if (brepAdaptor.GetGeomType() != GeomAbs_SurfaceType.GeomAbs_Plane)
{
StatusText = "Selected face is not a plane type surface.";
_SelectFaceAction.Reset();
return;
}
var subshapeReference = _Body.Shape.GetSubshapeReference(_ShapeForFaceSelection.GetTransformedBRep(), _SelectFaceAction.SelectedSubshape);
if (subshapeReference != null)
{
if (_Component == null)
{
_CreateComponent();
}
_Component.ReferenceFace = subshapeReference;
InteractiveContext.Current.UndoHandler.Commit();
}
else
{
Messages.Error("A subshape reference could not be produced for this subshape.");
}
}
ToggleFaceSelection();
if (_Component != null)
{
_InitInteractions();
}
else
{
Stop();
}
}
public static bool IsPlanarFace(TopoDSShape shape)
{
TopoDSFace face;
try
{
if ((shape.IsNull) || (shape.ShapeType != TopAbsShapeEnum.TopAbs_FACE))
{
return(false);
}
face = TopoDS.Face(shape);
}
catch
{
return(false);
}
var aFaceElementAdaptor = new BRepAdaptorSurface(face, true);
var surfaceType = aFaceElementAdaptor.GetType;
return(surfaceType == GeomAbsSurfaceType.GeomAbs_Plane);
}
//--------------------------------------------------------------------------------------------------
#endregion
#region Property List
void _InitProperties()
{
if (_Properties != null)
{
return;
}
_Properties = new List <BRepTopologyTreeProperty>();
try
{
_AddDefaultProperties();
switch (BrepShape.ShapeType())
{
case TopAbs_ShapeEnum.TopAbs_SHELL:
_AddShellProperties(BrepShape as TopoDS_Shell ?? TopoDS.Shell(BrepShape));
break;
case TopAbs_ShapeEnum.TopAbs_FACE:
_AddFaceProperties(BrepShape as TopoDS_Face ?? TopoDS.Face(BrepShape));
break;
case TopAbs_ShapeEnum.TopAbs_WIRE:
_AddWireProperties(BrepShape as TopoDS_Wire ?? TopoDS.Wire(BrepShape));
break;
case TopAbs_ShapeEnum.TopAbs_EDGE:
_AddEdgeProperties(BrepShape as TopoDS_Edge ?? TopoDS.Edge(BrepShape));
break;
case TopAbs_ShapeEnum.TopAbs_VERTEX:
_AddVertexProperties(BrepShape as TopoDS_Vertex ?? TopoDS.Vertex(BrepShape));
break;
}
}
catch (Exception e)
{
Messages.Exception($"Error getting properties for B-Rep shape {Name}", e);
}
}
public override bool Execute()
{
// Get the extrusion referenece shape, height and extrusion type
var offsetShape = Dependency[0].ReferedShape;
var offsetLength = Dependency[1].Real;
// Don't allow 0 offset
if (Math.Abs(offsetLength) < Precision.Confusion)
{
return(false);
}
//TopoDSShape resultShape = NodeUtils.GenerateWireOffset(offsetShapes, offsetLength);
// ! Currently only offset on 2D closed shapes of type Face can be made
if (offsetShape.ShapeType != TopAbsShapeEnum.TopAbs_FACE)
{
return(false);
}
var face = TopoDS.Face(offsetShape);
var resultShape = GeomUtils.GenerateFaceOffset(face, offsetLength);
if ((resultShape == null) || (resultShape.IsNull))
{
return(false);
}
var wire = TopoDS.Wire(resultShape);
var offsetFace = new BRepBuilderAPIMakeFace(wire, false).Face;
if (offsetFace.IsNull)
{
return(false);
}
// Set the result in the NamedShapeInterpreter and make the shape visible
Shape = offsetFace;
return(true);
}
//--------------------------------------------------------------------------------------------------
void _OnActionFinished(ToolAction toolAction)
{
bool finished = false;
var selectAction = toolAction as SelectSubshapeAction;
Debug.Assert(selectAction != null);
if (selectAction.SelectedSubshapeType == SubshapeTypes.Face)
{
var face = TopoDS.Face(selectAction.SelectedSubshape);
var brepAdaptor = new BRepAdaptor_Surface(face, true);
if (brepAdaptor.GetGeomType() != GeomAbs_SurfaceType.GeomAbs_Plane)
{
StatusText = "Selected face is not a plane type surface.";
}
finished = true;
}
if (finished)
{
var subshapeReference = _TargetShape.GetSubshapeReference(_TargetShape.GetTransformedBRep(), selectAction.SelectedSubshape);
selectAction.Stop();
Stop();
if (subshapeReference == null)
{
Messages.Error("A subshape reference could not be produced for this subshape.");
return;
}
_SelectedFunc.Invoke(subshapeReference);
}
else
{
selectAction.Reset();
}
WorkspaceController.Invalidate();
}
//--------------------------------------------------------------------------------------------------
void _OnActionFinished(ToolAction toolAction)
{
bool finished = false;
var selectAction = toolAction as SelectSubshapeAction;
Debug.Assert(selectAction != null);
if (selectAction.SelectedEntity is DatumPlane datumPlane)
{
_Plane = new Pln(datumPlane.GetCoordinateSystem());
finished = true;
}
else if (selectAction.SelectedSubshapeType == SubshapeTypes.Face)
{
var face = TopoDS.Face(selectAction.SelectedSubshape);
var brepAdaptor = new BRepAdaptor_Surface(face, true);
if (brepAdaptor.GetGeomType() != GeomAbs_SurfaceType.GeomAbs_Plane)
{
StatusText = "Selected face is not a plane type surface.";
}
else
{
FaceAlgo.GetCenteredPlaneFromFace(face, out _Plane);
finished = true;
}
}
if (finished)
{
selectAction.Stop();
Stop();
CreateSketch();
}
else
{
selectAction.Reset();
}
WorkspaceController.Invalidate();
}
//--------------------------------------------------------------------------------------------------
void _OnActionFinished(ToolAction toolAction)
{
bool finished = false;
var selectAction = toolAction as SelectSubshapeAction;
Debug.Assert(selectAction != null);
if (selectAction.SelectedSubshapeType == SubshapeTypes.Face)
{
var face = TopoDS.Face(selectAction.SelectedSubshape);
var brepAdaptor = new BRepAdaptor_Surface(face, true);
if (brepAdaptor.GetGeomType() != GeomAbs_SurfaceType.GeomAbs_Plane)
{
StatusText = "Selected face is not a plane type surface.";
}
else
{
selectAction.Stop();
((Tool)this).Stop();
finished = true;
// We have found a plane
var startFaceRef = _TargetBody.Shape.GetSubshapeReference(_TargetBody.GetTransformedBRep(), face);
var unfoldSheet = UnfoldSheet.Create(_TargetBody, startFaceRef);
if (unfoldSheet != null)
{
InteractiveContext.Current.UndoHandler.Commit();
InteractiveContext.Current.WorkspaceController.Selection.SelectEntity(_TargetBody);
}
}
}
if (!finished)
{
selectAction.Reset();
}
WorkspaceController.Invalidate();
}
/// <summary>
/// Applies fillet on the edges of a Face generated from a wire.
/// </summary>
private static TopoDSFace ApplyFilletOnFace(IList <SceneSelectedEntity> filletNodes, double radius,
int filletChamferType)
{
// This method processes only fillet2D and chamfer2D operations
if ((filletChamferType != (int)FilletChamferTypes.SimpleFillet2D) &&
(filletChamferType != (int)FilletChamferTypes.SimpleChamfer2D))
{
return(null);
}
// There should be at least two edges to apply fillet on them
if (filletNodes.Count < 2)
{
return(null);
}
// Check that the list contains only edges
foreach (var node in filletNodes)
{
if (node.ShapeType != TopAbsShapeEnum.TopAbs_EDGE)
{
return(null);
}
}
try
{
var fillet = new BRepFilletAPIMakeFillet2d();
// Initialize a fillet with the parent face of the edges
var face = TopoDS.Face(filletNodes[0].Node.Get <TopoDsShapeInterpreter>().Shape);
fillet.Init(face);
// Fillet the common vertexes
SceneSelectedEntity previousNode = null;
foreach (var node in filletNodes)
{
if (previousNode != null)
{
AddFaceFilletVertex(face, filletChamferType, radius, previousNode, node, fillet);
}
previousNode = node;
}
// Add also the last and first edges if they have a common node in the case there are more than 2 edges
if ((previousNode != null) && (filletNodes.Count > 2))
{
AddFaceFilletVertex(face, filletChamferType, radius, previousNode, filletNodes[0], fillet);
}
// Test if the operation succeeded
if (fillet.Status != ChFi2dConstructionError.ChFi2d_IsDone)
{
return(null);
}
var shape = fillet.Shape;
if ((shape == null) || (shape.IsNull))
{
return(null);
}
return(shape.ShapeType == TopAbsShapeEnum.TopAbs_FACE ? TopoDS.Face(shape) : null);
}
catch (Exception ex)
{
Log.Info("Apply Fillet2D error: " + ex.Message);
}
return(null);
}
//--------------------------------------------------------------------------------------------------
void _OnActionFinished(ToolAction toolAction)
{
var selectAction = toolAction as SelectSubshapeAction;
Debug.Assert(selectAction != null);
SubshapeReference subshapeRef = null;
switch (_TargetShape.ShapeType)
{
case ShapeType.Sketch:
if (selectAction.SelectedSubshapeType == SubshapeTypes.Edge)
{
subshapeRef = _TargetShape.GetSubshapeReference(_TargetShape.GetTransformedBRep(), TopoDS.Edge(selectAction.SelectedSubshape));
}
break;
case ShapeType.Solid:
if (selectAction.SelectedSubshapeType == SubshapeTypes.Face)
{
subshapeRef = _TargetShape.GetSubshapeReference(_TargetShape.GetTransformedBRep(), TopoDS.Face(selectAction.SelectedSubshape));
}
break;
default:
return;
}
if (subshapeRef != null)
{
selectAction.Stop();
Stop();
if (_Mode == ToolMode.CreateNew)
{
var mirror = Mirror.Create(_TargetBody, subshapeRef);
if (mirror != null)
{
InteractiveContext.Current.UndoHandler.Commit();
//InteractiveContext.Current.WorkspaceController.Selection.SelectEntity(_TargetBody);
}
}
else if (_Mode == ToolMode.Reselect)
{
// Reselected face or edge
_ModifierToChange.ReferenceShape = subshapeRef;
_ModifierToChange.Invalidate();
InteractiveContext.Current.UndoHandler.Commit();
}
}
else
{
selectAction.Reset();
}
WorkspaceController.Invalidate();
}
//--------------------------------------------------------------------------------------------------
public static TopoDS_Face ToFace(this TopoDS_Shape shape)
{
return(shape == null ? null : TopoDS.Face(shape));
}
//--------------------------------------------------------------------------------------------------
void _OnActionFinished(ToolAction toolAction)
{
bool finished = false;
var selectAction = toolAction as SelectSubshapeAction;
Debug.Assert(selectAction != null);
if (selectAction.SelectedSubshapeType == SubshapeTypes.Face)
{
var face = TopoDS.Face(selectAction.SelectedSubshape);
var brepAdaptor = new BRepAdaptor_Surface(face, true);
if (brepAdaptor.GetGeomType() != GeomAbs_SurfaceType.GeomAbs_Plane)
{
StatusText = "Selected face is not a plane type surface.";
}
else
{
selectAction.Stop();
Stop();
finished = true;
var faceRef = _TargetShape.GetSubshapeReference(_TargetBrep, face);
if (faceRef == null)
{
Messages.Error("A subshape reference could not be produced for this face.");
return;
}
if (_Mode == ToolMode.CreateNew)
{
// Create new
var sketch = new Sketch
{
Body = _TargetBody,
};
var imprint = Imprint.Create(_TargetBody, faceRef, sketch);
if (imprint != null)
{
imprint.Mode = _ImprintMode;
InteractiveContext.Current.UndoHandler.Commit();
InteractiveContext.Current.WorkspaceController.Selection.SelectEntity(_TargetBody);
WorkspaceController.StartTool(new SketchEditorTool(sketch));
}
}
else if (_Mode == ToolMode.ReselectFace)
{
// Reselected face
_ImprintToChange.Face = faceRef;
_ImprintToChange.Invalidate();
InteractiveContext.Current.UndoHandler.Commit();
}
}
}
if (!finished)
{
selectAction.Reset();
}
WorkspaceController.Invalidate();
}
private static TopoDSShape ApplyFillet(double thickness, TopoDSShape body, int edgeNumber, int operationType)
{
try
{
// Create fillet
var aEdgeExplorer = new TopExpExplorer(body, TopAbsShapeEnum.TopAbs_EDGE,
TopAbsShapeEnum.TopAbs_SHAPE);
var number = 1;
TopoDSShape shape = null;
while (aEdgeExplorer.More)
{
if ((edgeNumber == 0) || (edgeNumber == number))
{
var anEdge = TopoDS.Edge(aEdgeExplorer.Current);
if (operationType == (int)FilletChamferTypes.SimpleFillet)
{
var fillet = new BRepFilletAPIMakeFillet(body, ChFi3dFilletShape.ChFi3d_Rational);
// Add edge to fillet algorithm
fillet.Add(thickness, anEdge);
// Check if valid contour
try
{
if (fillet.StripeStatus(fillet.Contour(anEdge)) != ChFiDSErrorStatus.ChFiDS_Ok)
{
return(null);
}
}
catch (Exception)
{
Log.Info("Exception on applying fillet");
}
shape = fillet.Shape;
}
else
{
var chamfer = new BRepFilletAPIMakeChamfer(body);
var aMap = new TopToolsIndexedDataMapOfShapeListOfShape(1);
TopExp.MapShapesAndAncestors(body, TopAbsShapeEnum.TopAbs_EDGE, TopAbsShapeEnum.TopAbs_FACE,
aMap);
// Locate an ancestor face
for (var i = 1; i < aMap.Extent; i++)
{
var localEdge = TopoDS.Edge(aMap.FindKey(i));
if (!anEdge.IsSame(localEdge))
{
continue;
}
// We found an ancestor face
var face = TopoDS.Face(aMap.FindFromIndex(i).First);
// Add the edge and face on the chmafer algorithm
chamfer.Add(thickness, thickness, anEdge, face);
}
shape = chamfer.Shape;
}
}
aEdgeExplorer.Next();
number++;
}
// Check the shape validity
if ((shape == null) || (shape.IsNull))
{
return(null);
}
return(shape);
}
catch (Exception ex)
{
Log.Info("Apply fillet error: " + ex.Message);
}
return(null);
}
//--------------------------------------------------------------------------------------------------
void _OnActionFinished(ToolAction toolAction)
{
bool finished = false;
var selectAction = toolAction as SelectSubshapeAction;
Debug.Assert(selectAction != null);
if (selectAction.SelectedEntity is DatumPlane plane)
{
WorkspaceController.Workspace.WorkingPlane = new Pln(plane.GetCoordinateSystem());
finished = true;
}
else
{
switch (selectAction.SelectedSubshapeType)
{
case SubshapeTypes.Face:
{
var face = TopoDS.Face(selectAction.SelectedSubshape);
var brepAdaptor = new BRepAdaptor_Surface(face, true);
if (brepAdaptor.GetGeomType() != GeomAbs_SurfaceType.GeomAbs_Plane)
{
StatusText = "Selected face is not a plane type surface.";
}
else
{
double centerU = brepAdaptor.FirstUParameter() + (brepAdaptor.LastUParameter() - brepAdaptor.FirstUParameter()) / 2;
double centerV = brepAdaptor.FirstVParameter() + (brepAdaptor.LastVParameter() - brepAdaptor.FirstVParameter()) / 2;
var centerPnt = brepAdaptor.Value(centerU, centerV);
WorkspaceController.Workspace.WorkingPlane = new Pln(centerPnt, brepAdaptor.Plane().Axis.Direction);
finished = true;
}
break;
}
case SubshapeTypes.Edge:
{
var edge = TopoDS.Edge(selectAction.SelectedSubshape);
double firstParam = 0, lastParam = 0;
var curve = BRep_Tool.Curve(edge, ref firstParam, ref lastParam);
if (curve != null)
{
var midpoint = curve.Value(firstParam + (lastParam - firstParam) / 2);
WorkspaceController.Workspace.WorkingPlane = new Pln(midpoint, WorkspaceController.Workspace.WorkingPlane.Axis.Direction);
finished = true;
}
break;
}
case SubshapeTypes.Vertex:
{
var vertex = TopoDS.Vertex(selectAction.SelectedSubshape);
WorkspaceController.Workspace.WorkingPlane = new Pln(BRep_Tool.Pnt(vertex), WorkspaceController.Workspace.WorkingPlane.Axis.Direction);
finished = true;
break;
}
}
}
if (finished)
{
selectAction.Stop();
Stop();
}
else
{
selectAction.Reset();
}
WorkspaceController.Invalidate();
}