protected override void OnMeasure(MeasureSpecification widthMeasureSpec, MeasureSpecification heightMeasureSpec)
{
float maxWidth = SuggestedMinimumWidth.AsDecimal();
float maxHeight = SuggestedMinimumHeight.AsDecimal();
MeasuredSize.StateType childWidthState = MeasuredSize.StateType.MeasuredSizeOK;
MeasuredSize.StateType childHeightState = MeasuredSize.StateType.MeasuredSizeOK;
var appBar = (Owner as ContentPage)?.AppBar;
var content = (Owner as ContentPage)?.Content;
foreach (var childLayout in LayoutChildren)
{
if (!childLayout.SetPositionByLayout)
{
continue;
}
if ((content != null) && (content == childLayout.Owner) && (content.HeightSpecification == LayoutParamPolicies.MatchParent))
{
var contentSizeH = heightMeasureSpec.Size.AsDecimal() - Padding.Top - Padding.Bottom - content.Margin.Top - content.Margin.Bottom - (appBar?.Layout.MeasuredHeight.Size.AsDecimal() ?? 0);
MeasureSpecification contentHeightSpec = new MeasureSpecification(new LayoutLength(contentSizeH), MeasureSpecification.ModeType.Exactly);
MeasureChildWithoutPadding(childLayout, widthMeasureSpec, contentHeightSpec);
}
else
{
MeasureChildWithoutPadding(childLayout, widthMeasureSpec, heightMeasureSpec);
}
float childRight = childLayout.MeasuredWidth.Size.AsDecimal() + childLayout.Owner.PositionX;
float childBottom = childLayout.MeasuredHeight.Size.AsDecimal() + childLayout.Owner.PositionY;
if (maxWidth < childRight)
{
maxWidth = childRight;
}
if (maxHeight < childBottom)
{
maxHeight = childBottom;
}
if (childLayout.MeasuredWidth.State == MeasuredSize.StateType.MeasuredSizeTooSmall)
{
childWidthState = MeasuredSize.StateType.MeasuredSizeTooSmall;
}
if (childLayout.MeasuredHeight.State == MeasuredSize.StateType.MeasuredSizeTooSmall)
{
childHeightState = MeasuredSize.StateType.MeasuredSizeTooSmall;
}
}
SetMeasuredDimensions(ResolveSizeAndState(new LayoutLength(maxWidth), widthMeasureSpec, childWidthState),
ResolveSizeAndState(new LayoutLength(maxHeight), heightMeasureSpec, childHeightState));
}
/// <summary>
/// Measure the layout and its content to determine the measured width and the measured height.<br />
/// </summary>
/// <param name="widthMeasureSpec">horizontal space requirements as imposed by the parent.</param>
/// <param name="heightMeasureSpec">vertical space requirements as imposed by the parent.</param>
/// <since_tizen> 6 </since_tizen>
protected override void OnMeasure(MeasureSpecification widthMeasureSpec, MeasureSpecification heightMeasureSpec)
{
// Ensure layout respects it's given minimum size
float maxWidth = SuggestedMinimumWidth.AsDecimal();
float maxHeight = SuggestedMinimumHeight.AsDecimal();
MeasuredSize.StateType childWidthState = MeasuredSize.StateType.MeasuredSizeOK;
MeasuredSize.StateType childHeightState = MeasuredSize.StateType.MeasuredSizeOK;
for (int i = 0; i < LayoutChildren.Count; i++)
{
LayoutItem childLayout = LayoutChildren[i];
if (childLayout != null)
{
// Get size of child with no padding, no margin. we won't support margin, padding for AbsolutLayout.
MeasureChildWithoutPadding(childLayout, widthMeasureSpec, heightMeasureSpec);
if (childLayout.Owner.ExcludeLayouting)
{
continue;
}
// Determine the width and height needed by the children using their given position and size.
// Children could overlap so find the right most child.
Position2D childPosition = childLayout.Owner.Position2D;
float childRight = childLayout.MeasuredWidth.Size.AsDecimal() + childPosition.X;
float childBottom = childLayout.MeasuredHeight.Size.AsDecimal() + childPosition.Y;
if (maxWidth < childRight)
{
maxWidth = childRight;
}
if (maxHeight < childBottom)
{
maxHeight = childBottom;
}
if (childLayout.MeasuredWidth.State == MeasuredSize.StateType.MeasuredSizeTooSmall)
{
childWidthState = MeasuredSize.StateType.MeasuredSizeTooSmall;
}
if (childLayout.MeasuredHeight.State == MeasuredSize.StateType.MeasuredSizeTooSmall)
{
childHeightState = MeasuredSize.StateType.MeasuredSizeTooSmall;
}
}
}
SetMeasuredDimensions(ResolveSizeAndState(new LayoutLength(maxWidth), widthMeasureSpec, childWidthState),
ResolveSizeAndState(new LayoutLength(maxHeight), heightMeasureSpec, childHeightState));
}
} // MeasureHorizontal
private void MeasureVertical(MeasureSpecification widthMeasureSpec, MeasureSpecification heightMeasureSpec)
{
var widthMode = widthMeasureSpec.Mode;
var heightMode = heightMeasureSpec.Mode;
bool isExactly = (heightMode == MeasureSpecification.ModeType.Exactly);
bool matchWidth = false;
bool allFillParent = true;
float maxWidth = 0.0f;
float alternativeMaxWidth = 0.0f;
float weightedMaxWidth = 0.0f;
float totalWeight = 0.0f;
int childrenCount = IterateLayoutChildren().Count();
// Reset total length
_totalLength = 0.0f;
float usedExcessSpace = 0.0f;
HeightAndWidthState childState = new HeightAndWidthState(MeasuredSize.StateType.MeasuredSizeOK,
MeasuredSize.StateType.MeasuredSizeOK);
// measure children, and determine if further resolution is required
// 1st phase:
// We cycle through all children and measure children with weight 0 (non weighted children) according to their specs
// to accumulate total used space in _totalLength.
// Weighted children are not measured in this phase.
// Available space for weighted children will be calculated in the phase 2 based on _totalLength value.
foreach (LayoutItem childLayout in IterateLayoutChildren())
{
childrenCount++;
int childDesiredWidth = childLayout.Owner.WidthSpecification;
float childWeight = childLayout.Owner.Weight;
Extents childMargin = childLayout.Margin;
totalWeight += childWeight;
bool useExcessSpace = (childLayout.Owner.HeightSpecification == 0) && (childWeight > 0);
if (isExactly && useExcessSpace)
{
_totalLength = Math.Max(_totalLength, (_totalLength + childMargin.Top + childMargin.Bottom));
}
else
{
if (useExcessSpace)
{
// The heightMode is either Unspecified or AtMost, and
// this child is only laid out using excess space. Measure
// using WrapContent so that we can find out the view's
// optimal height.
// We'll restore the original height of 0 after measurement.
MeasureSpecification childWidthMeasureSpec = GetChildMeasureSpecification(
new MeasureSpecification(
new LayoutLength(widthMeasureSpec.Size - (childLayout.Margin.Start + childLayout.Margin.End)),
widthMeasureSpec.Mode),
new LayoutLength(Padding.Start + Padding.End),
new LayoutLength(childDesiredWidth));
MeasureSpecification childHeightMeasureSpec = GetChildMeasureSpecification(
new MeasureSpecification(
new LayoutLength(heightMeasureSpec.Size - (childLayout.Margin.Top + childLayout.Margin.Bottom)),
heightMeasureSpec.Mode),
new LayoutLength(Padding.Top + Padding.Bottom),
new LayoutLength(LayoutParamPolicies.WrapContent));
childLayout.Measure(childWidthMeasureSpec, childHeightMeasureSpec);
usedExcessSpace += childLayout.MeasuredHeight.Size.AsDecimal();
}
else
{
MeasureChildWithMargins(childLayout, widthMeasureSpec, new LayoutLength(0), heightMeasureSpec, new LayoutLength(0));
}
LayoutLength childHeight = childLayout.MeasuredHeight.Size;
LayoutLength length = childHeight + childMargin.Top + childMargin.Bottom;
_totalLength = Math.Max(_totalLength, _totalLength + length.AsDecimal());
}
bool matchWidthLocally = false;
if (widthMode != MeasureSpecification.ModeType.Exactly && childDesiredWidth == LayoutParamPolicies.MatchParent)
{
// Will have to re-measure at least this child when we know exact height.
matchWidth = true;
matchWidthLocally = true;
}
float marginWidth = childLayout.Margin.Start + childLayout.Margin.End;
float childWidth = childLayout.MeasuredWidth.Size.AsDecimal() + marginWidth;
if (childLayout.MeasuredWidth.State == MeasuredSize.StateType.MeasuredSizeTooSmall)
{
childState.widthState = MeasuredSize.StateType.MeasuredSizeTooSmall;
}
if (childLayout.MeasuredHeight.State == MeasuredSize.StateType.MeasuredSizeTooSmall)
{
childState.heightState = MeasuredSize.StateType.MeasuredSizeTooSmall;
}
maxWidth = Math.Max(maxWidth, childWidth);
allFillParent = (allFillParent && childDesiredWidth == LayoutParamPolicies.MatchParent);
if (childWeight > 0)
{
// Widths of weighted Views are bogus if we end up remeasuring, so keep them separate.
weightedMaxWidth = Math.Max(weightedMaxWidth, matchWidthLocally ? marginWidth : childWidth);
}
else
{
alternativeMaxWidth = Math.Max(alternativeMaxWidth, matchWidthLocally ? marginWidth : childWidth);
}
} // foreach
_totalLength = Math.Max(_totalLength, _totalLength + CellPadding.Height * (childrenCount - 1));
float heightSize = _totalLength;
heightSize = Math.Max(heightSize, SuggestedMinimumHeight.AsDecimal());
MeasuredSize heightSizeAndState = ResolveSizeAndState(new LayoutLength(heightSize + Padding.Top + Padding.Bottom), heightMeasureSpec, MeasuredSize.StateType.MeasuredSizeOK);
heightSize = heightSizeAndState.Size.AsDecimal();
// 2nd phase:
// We cycle through weighted children now (children with weight > 0).
// The children are measured with exact size equal to their share of the available space based on their weights.
// _totalLength is updated to include weighted children measured sizes.
float remainingExcess = heightSize - _totalLength + usedExcessSpace - (Padding.Top + Padding.Bottom);
if (remainingExcess != 0 && totalWeight > 0.0f)
{
float remainingWeight = totalWeight;
maxWidth = 0;
_totalLength = 0;
foreach (LayoutItem childLayout in IterateLayoutChildren())
{
float desiredChildWidth = childLayout.Owner.WidthSpecification;
float childWeight = childLayout.Owner.Weight;
Extents childMargin = childLayout.Margin;
if (childWeight > 0)
{
MeasureWeightedChild(childLayout, remainingExcess, remainingWeight, childWeight,
widthMeasureSpec, heightMeasureSpec, childState,
Orientation.Vertical);
}
float length = childLayout.MeasuredHeight.Size.AsDecimal() + childMargin.Top + childMargin.Bottom;
_totalLength += length;
bool matchWidthLocally = (widthMode != MeasureSpecification.ModeType.Exactly) && (desiredChildWidth == LayoutParamPolicies.MatchParent);
float marginWidth = childMargin.Start + childMargin.End;
float childWidth = childLayout.MeasuredWidth.Size.AsDecimal() + marginWidth;
maxWidth = Math.Max(maxWidth, childWidth);
alternativeMaxWidth = Math.Max(alternativeMaxWidth, matchWidthLocally ? marginWidth : childWidth);
allFillParent = (allFillParent && desiredChildWidth == LayoutParamPolicies.MatchParent);
} // for loop
_totalLength = Math.Max(_totalLength, _totalLength + CellPadding.Height * (childrenCount - 1));
}
else
{
alternativeMaxWidth = Math.Max(alternativeMaxWidth, weightedMaxWidth);
}
if (!allFillParent && widthMode != MeasureSpecification.ModeType.Exactly)
{
maxWidth = alternativeMaxWidth;
}
maxWidth += (Owner.WidthSpecification == LayoutParamPolicies.WrapContent) ? (Padding.Start + Padding.End) : 0;
maxWidth = Math.Max(maxWidth, SuggestedMinimumWidth.AsRoundedValue());
heightSizeAndState.State = childState.heightState;
SetMeasuredDimensions(ResolveSizeAndState(new LayoutLength(maxWidth), widthMeasureSpec, childState.widthState),
heightSizeAndState);
if (matchWidth)
{
ForceUniformWidth(heightMeasureSpec);
}
} // MeasureVertical
private void MeasureHorizontal(MeasureSpecification widthMeasureSpec, MeasureSpecification heightMeasureSpec)
{
var widthMode = widthMeasureSpec.Mode;
var heightMode = heightMeasureSpec.Mode;
bool isExactly = (widthMode == MeasureSpecification.ModeType.Exactly);
bool matchHeight = false;
bool allFillParent = true;
float maxHeight = 0.0f;
float alternativeMaxHeight = 0.0f;
float weightedMaxHeight = 0.0f;
float totalWeight = 0.0f;
int childrenCount = IterateLayoutChildren().Count();
// Reset measure variables
_totalLength = 0.0f;
float usedExcessSpace = 0.0f;
HeightAndWidthState childState = new HeightAndWidthState(MeasuredSize.StateType.MeasuredSizeOK,
MeasuredSize.StateType.MeasuredSizeOK);
// 1st phase:
// We cycle through all children and measure children with weight 0 (non weighted children) according to their specs
// to accumulate total used space in totalLength based on measured sizes and margins.
// Weighted children are not measured at this phase.
// Available space for weighted children will be calculated in the phase 2 based on totalLength value.
// Max height of children is stored.
foreach (LayoutItem childLayout in IterateLayoutChildren())
{
int childDesiredHeight = childLayout.Owner.HeightSpecification;
float childWeight = childLayout.Owner.Weight;
Extents childMargin = childLayout.Margin;
totalWeight += childWeight;
bool useExcessSpace = (childLayout.Owner.WidthSpecification == 0) && (childWeight > 0);
if (isExactly && useExcessSpace)
{
// Children to be laid out with excess space can be measured later
_totalLength = Math.Max(_totalLength, (_totalLength + childMargin.Start + childMargin.End));
}
else
{
if (useExcessSpace)
{
// Parent is not defiend!!!
// The widthMode is either Unspecified or AtMost, and
// this child is only laid out using excess space. Measure
// using WrapContent so that we can find out the view's
// optimal width.
MeasureSpecification childWidthMeasureSpec = GetChildMeasureSpecification(
new MeasureSpecification(
new LayoutLength(widthMeasureSpec.Size - (childLayout.Margin.Start + childLayout.Margin.End)),
widthMeasureSpec.Mode),
new LayoutLength(Padding.Start + Padding.End),
new LayoutLength(LayoutParamPolicies.WrapContent));
MeasureSpecification childHeightMeasureSpec = GetChildMeasureSpecification(
new MeasureSpecification(
new LayoutLength(heightMeasureSpec.Size - (childLayout.Margin.Top + childLayout.Margin.Bottom)),
heightMeasureSpec.Mode),
new LayoutLength(Padding.Top + Padding.Bottom),
new LayoutLength(childDesiredHeight));
childLayout.Measure(childWidthMeasureSpec, childHeightMeasureSpec);
usedExcessSpace += childLayout.MeasuredWidth.Size.AsDecimal();
}
else
{
MeasureChildWithMargins(childLayout, widthMeasureSpec, new LayoutLength(0), heightMeasureSpec, new LayoutLength(0));
}
LayoutLength childWidth = childLayout.MeasuredWidth.Size;
LayoutLength length = childWidth + childMargin.Start + childMargin.End;
_totalLength = Math.Max(_totalLength, _totalLength + length.AsDecimal());
}
bool matchHeightLocally = false;
if (heightMode != MeasureSpecification.ModeType.Exactly && childDesiredHeight == LayoutParamPolicies.MatchParent)
{
// A child has set to MatchParent on it's height.
// Will have to re-measure at least this child when we know exact height.
matchHeight = true;
matchHeightLocally = true;
}
float marginHeight = childMargin.Top + childMargin.Bottom;
float childHeight = childLayout.MeasuredHeight.Size.AsDecimal() + marginHeight;
if (childLayout.MeasuredWidth.State == MeasuredSize.StateType.MeasuredSizeTooSmall)
{
childState.widthState = MeasuredSize.StateType.MeasuredSizeTooSmall;
}
if (childLayout.MeasuredHeight.State == MeasuredSize.StateType.MeasuredSizeTooSmall)
{
childState.heightState = MeasuredSize.StateType.MeasuredSizeTooSmall;
}
maxHeight = Math.Max(maxHeight, childHeight);
allFillParent = (allFillParent && childDesiredHeight == LayoutParamPolicies.MatchParent);
if (childWeight > 0)
{
// Heights of weighted Views are invalid if we end up remeasuring, so store them separately.
weightedMaxHeight = Math.Max(weightedMaxHeight, matchHeightLocally ? marginHeight : childHeight);
}
else
{
alternativeMaxHeight = Math.Max(alternativeMaxHeight, matchHeightLocally ? marginHeight : childHeight);
}
} // foreach
_totalLength = Math.Max(_totalLength, _totalLength + CellPadding.Width * (childrenCount - 1));
float widthSize = _totalLength;
widthSize = Math.Max(widthSize, SuggestedMinimumWidth.AsDecimal());
MeasuredSize widthSizeAndState = ResolveSizeAndState(new LayoutLength(widthSize + Padding.Start + Padding.End), widthMeasureSpec, MeasuredSize.StateType.MeasuredSizeOK);
widthSize = widthSizeAndState.Size.AsDecimal();
// 2nd phase:
// Expand children with weight to take up available space
// We cycle through weighted children now (children with weight > 0).
// The children are measured with exact size equal to their share of the available space based on their weights.
// _totalLength is updated to include weighted children measured sizes.
float remainingExcess = widthSize - _totalLength + usedExcessSpace - (Padding.Start + Padding.End);
if (remainingExcess != 0 && totalWeight > 0)
{
float remainingWeight = totalWeight;
maxHeight = 0;
_totalLength = 0;
foreach (LayoutItem childLayout in IterateLayoutChildren())
{
float desiredChildHeight = childLayout.Owner.HeightSpecification;
float childWeight = childLayout.Owner.Weight;
Extents childMargin = childLayout.Margin;
if (childWeight > 0)
{
MeasureWeightedChild(childLayout, remainingExcess, remainingWeight, childWeight,
widthMeasureSpec, heightMeasureSpec, childState,
Orientation.Horizontal);
}
float length = childLayout.MeasuredWidth.Size.AsDecimal() + childMargin.Start + childMargin.End;
_totalLength += length;
bool matchHeightLocally = (heightMode != MeasureSpecification.ModeType.Exactly) && (desiredChildHeight == LayoutParamPolicies.MatchParent);
float marginHeight = childMargin.Top + childMargin.Bottom;
float childHeight = childLayout.MeasuredHeight.Size.AsDecimal() + marginHeight;
maxHeight = Math.Max(maxHeight, childHeight);
alternativeMaxHeight = Math.Max(alternativeMaxHeight, matchHeightLocally ? marginHeight : childHeight);
allFillParent = (allFillParent && desiredChildHeight == LayoutParamPolicies.MatchParent);
} // for loop
_totalLength = Math.Max(_totalLength, _totalLength + CellPadding.Width * (childrenCount - 1));
}
else
{
// No excess space or no weighted children
alternativeMaxHeight = Math.Max(alternativeMaxHeight, weightedMaxHeight);
}
if (!allFillParent && heightMode != MeasureSpecification.ModeType.Exactly)
{
maxHeight = alternativeMaxHeight;
}
// Padding should be concerned when specification is Wrapcontent.
maxHeight += (Owner.HeightSpecification == LayoutParamPolicies.WrapContent) ? (Padding.Top + Padding.Bottom) : 0;
maxHeight = Math.Max(maxHeight, SuggestedMinimumHeight.AsRoundedValue());
widthSizeAndState.State = childState.widthState;
SetMeasuredDimensions(widthSizeAndState,
ResolveSizeAndState(new LayoutLength(maxHeight), heightMeasureSpec, childState.heightState));
if (matchHeight)
{
ForceUniformHeight(widthMeasureSpec);
}
} // MeasureHorizontal
} // MeasureHorizontal
private void MeasureVertical(MeasureSpecification widthMeasureSpec, MeasureSpecification heightMeasureSpec)
{
var widthMode = widthMeasureSpec.Mode;
var heightMode = heightMeasureSpec.Mode;
bool isWidthExactly = (widthMode == MeasureSpecification.ModeType.Exactly);
bool isHeightExactly = (heightMode == MeasureSpecification.ModeType.Exactly);
float maxWidth = 0.0f;
float totalWeight = 0.0f;
int childrenCount = IterateLayoutChildren().Count();
// Child layout, which wants to match its height to its parent's remaining height, is either following 1 or 2.
// 1. Child layout whose Owner.HeightSpecification is LayoutParamPolicies.MatchParent.
// 2. Child layout whose Owner.HeightSpecification is 0 and Owner.Weight is greater than 0.
// The number of child layout which wants to match its height to its parent's remaining height.
int childrenMatchParentCount = 0;
// Reset measure variable
totalLength = 0.0f;
HeightAndWidthState childState = new HeightAndWidthState(MeasuredSize.StateType.MeasuredSizeOK,
MeasuredSize.StateType.MeasuredSizeOK);
// 1ST PHASE:
//
// We measure all children whose height specification policy is WrapContent without weight.
// After 1st phase, remaining height of parent is accumulated to calculate height of children
// whose height specification policy is MatchParent.
foreach (var childLayout in LayoutChildren)
{
if (!childLayout.SetPositionByLayout)
{
continue;
}
int childDesiredWidth = childLayout.Owner.WidthSpecification;
int childDesiredHeight = childLayout.Owner.HeightSpecification;
float childWeight = childLayout.Owner.Weight;
Extents childMargin = childLayout.Margin;
float childMarginWidth = childMargin.Start + childMargin.End;
float childMarginHeight = childMargin.Top + childMargin.Bottom;
bool useRemainingHeight = (childDesiredHeight == 0) && (childWeight > 0);
if ((childDesiredHeight == LayoutParamPolicies.MatchParent) || (useRemainingHeight))
{
totalWeight += childWeight;
childrenMatchParentCount++;
}
// MatchParent child layout's margin is not added to totalLength.
// Consequently, MatchParent child layout's margin is added to remaining size,
// so the margin is not shared with other MatchParent child layouts.
// e.g.
// LinearLayout has size 100.
// Child layout1 is MatchParent and its margin is 20. (This margin is not ad
// Child layout2 is MatchParent and its margin is 0.
// Then, child layout1's size is 30 and child layout2's size is 50.
if ((childDesiredHeight == LayoutParamPolicies.WrapContent) || ((childDesiredHeight > 0) && (!useRemainingHeight)))
{
MeasureChildWithMargins(childLayout, widthMeasureSpec, new LayoutLength(0), heightMeasureSpec, new LayoutLength(0));
float childMeasuredHeight = childLayout.MeasuredHeight.Size.AsDecimal();
if (childMeasuredHeight < 0)
{
totalLength = Math.Max(totalLength, totalLength + childMarginHeight);
}
else
{
totalLength = Math.Max(totalLength, totalLength + childMeasuredHeight + childMarginHeight);
}
}
if (childLayout.MeasuredWidth.State == MeasuredSize.StateType.MeasuredSizeTooSmall)
{
childState.widthState = MeasuredSize.StateType.MeasuredSizeTooSmall;
}
if (childLayout.MeasuredHeight.State == MeasuredSize.StateType.MeasuredSizeTooSmall)
{
childState.heightState = MeasuredSize.StateType.MeasuredSizeTooSmall;
}
float childMeasuredWidth = childLayout.MeasuredWidth.Size.AsDecimal();
if (childMeasuredWidth < 0)
{
maxWidth = Math.Max(maxWidth, childMarginWidth);
}
else
{
maxWidth = Math.Max(maxWidth, childMeasuredWidth + childMarginWidth);
}
} // 1ST PHASE foreach
totalLength = Math.Max(totalLength, totalLength + CellPadding.Height * (childrenCount - 1) + Padding.Top + Padding.Bottom);
float heightSize = Math.Max(totalLength, SuggestedMinimumHeight.AsDecimal());
MeasuredSize heightSizeAndState = ResolveSizeAndState(new LayoutLength(heightSize), heightMeasureSpec, MeasuredSize.StateType.MeasuredSizeOK);
heightSize = heightSizeAndState.Size.AsDecimal();
float remainingHeight = heightSize - totalLength;
float totalWeightLength = 0.0f;
// Up to now, only WrapContent children's sizes are added to the totalLength.
// Since the totalLength is used in OnLayout as the sum of all children's sizes,
// the layout size is assigned to the totalLength if MatchParent child exists.
if (childrenMatchParentCount > 0)
{
totalLength = heightSize;
}
// 2ND PHASE:
//
// We measure all children whose height specification policy is MatchParent without weight.
// After 2nd phase, all children's heights are calculated without considering weight.
// And the heights of all weighted children are accumulated to calculate weighted height.
foreach (var childLayout in LayoutChildren)
{
if (!childLayout.SetPositionByLayout)
{
continue;
}
int childDesiredWidth = childLayout.Owner.WidthSpecification;
int childDesiredHeight = childLayout.Owner.HeightSpecification;
float childWeight = childLayout.Owner.Weight;
Extents childMargin = childLayout.Margin;
float childMarginWidth = childMargin.Start + childMargin.End;
bool useRemainingHeight = (childDesiredHeight == 0) && (childWeight > 0);
bool needToMeasure = false;
if ((childDesiredWidth == LayoutParamPolicies.MatchParent) || (useRemainingHeight))
{
if (isWidthExactly)
{
needToMeasure = true;
}
// RelativeLayout's MatchParent children should not fill to the RelativeLayout.
// Because the children's sizes and positions are calculated by RelativeLayout's APIs.
// Therefore, not to fill the RelativeLayout, the mode is changed from Exactly to AtMost.
//
// Not to print the recursive reference error message for this case, Specification is checked if it is WrapContent.
else if (Owner.WidthSpecification == LayoutParamPolicies.WrapContent)
{
if (childDesiredWidth == LayoutParamPolicies.MatchParent)
{
Tizen.Log.Error("NUI", "There is a recursive reference! Parent layout(Owner: " + Owner + ")'s WidthSpecification is WrapContent and child layout(Owner: " + childLayout.Owner + ")'s WidthSpecification is MatchParent!");
}
else
{
Tizen.Log.Error("NUI", "There is a recursive reference! Parent layout(Owner: " + Owner + ")'s WidthSpecification is WrapContent and child layout(Owner: " + childLayout.Owner + ")'s WidthSpecification is 0 with positive weight!");
}
}
}
if (remainingHeight > 0)
{
if ((childDesiredHeight == LayoutParamPolicies.MatchParent) || (useRemainingHeight))
{
if (isHeightExactly)
{
// In MeasureChildWithMargins(), it is assumed that heightMeasureSpec includes Padding.Top and Padding.Bottom.
// Therefore, Padding.Top and Padding.Bottom are added to heightMeasureSpec.Size before it is passed to MeasureChildWithMargins().
heightMeasureSpec.SetSize(new LayoutLength((int)(remainingHeight / childrenMatchParentCount) + Padding.Top + Padding.Bottom));
needToMeasure = true;
}
// RelativeLayout's MatchParent children should not fill to the RelativeLayout.
// Because the children's sizes and positions are calculated by RelativeLayout's APIs.
// Therefore, not to fill the RelativeLayout, the mode is changed from Exactly to AtMost.
//
// Not to print the recursive reference error message for this case, Specification is checked if it is WrapContent.
else if (Owner.HeightSpecification == LayoutParamPolicies.WrapContent)
{
if (childDesiredHeight == LayoutParamPolicies.MatchParent)
{
Tizen.Log.Error("NUI", "There is a recursive reference! Parent layout(Owner: " + Owner + ")'s HeightSpecification is WrapContent and child layout(Owner: " + childLayout.Owner + ")'s HeightSpecification is MatchParent!");
}
else
{
Tizen.Log.Error("NUI", "There is a recursive reference! Parent layout(Owner: " + Owner + ")'s HeightSpecification is WrapContent and child layout(Owner: " + childLayout.Owner + ")'s HeightSpecification is 0 with positive weight!");
}
}
}
}
if (needToMeasure == true)
{
MeasureChildWithMargins(childLayout, widthMeasureSpec, new LayoutLength(0), heightMeasureSpec, new LayoutLength(0));
float childMeasuredWidth = childLayout.MeasuredWidth.Size.AsDecimal();
if (childMeasuredWidth < 0)
{
maxWidth = Math.Max(maxWidth, childMarginWidth);
}
else
{
maxWidth = Math.Max(maxWidth, childMeasuredWidth + childMarginWidth);
}
}
if ((childWeight > 0) && ((childDesiredHeight == LayoutParamPolicies.MatchParent) || (childDesiredHeight == 0)))
{
float childMeasuredHeight = childLayout.MeasuredHeight.Size.AsDecimal();
if (childMeasuredHeight < 0)
{
totalWeightLength = Math.Max(totalWeightLength, totalWeightLength + childMargin.Top + childMargin.Bottom);
}
else
{
totalWeightLength = Math.Max(totalWeightLength, totalWeightLength + childMeasuredHeight + childMargin.Top + childMargin.Bottom);
}
}
} // 2ND PHASE foreach
// 3RD PHASE:
//
// We measure all weighted children whose owner has weight greater than 0.
// After 3rd phase, all weighted children has height which is proportional to their weights
// in remaining height of parent.
if (totalWeight > 0)
{
foreach (var childLayout in LayoutChildren)
{
if (!childLayout.SetPositionByLayout)
{
continue;
}
int childDesiredHeight = childLayout.Owner.HeightSpecification;
float childWeight = childLayout.Owner.Weight;
if ((childWeight > 0) && ((childDesiredHeight == LayoutParamPolicies.MatchParent) || (childDesiredHeight == 0)))
{
if (isHeightExactly)
{
MeasureWeightedChild(childLayout, totalWeightLength, totalWeight, childWeight,
widthMeasureSpec, heightMeasureSpec, childState,
Orientation.Vertical);
}
// RelativeLayout's MatchParent children should not fill to the RelativeLayout.
// Because the children's sizes and positions are calculated by RelativeLayout's APIs.
// Therefore, not to fill the RelativeLayout, the mode is changed from Exactly to AtMost.
//
// Not to print the recursive reference error message for this case, Specification is checked if it is WrapContent.
else if (Owner.HeightSpecification == LayoutParamPolicies.WrapContent)
{
if (childDesiredHeight == LayoutParamPolicies.MatchParent)
{
Tizen.Log.Error("NUI", "There is a recursive reference! Parent layout(Owner: " + Owner + ")'s HeightSpecification is WrapContent and child layout(Owner: " + childLayout.Owner + ")'s HeightSpecification is MatchParent!");
}
else
{
Tizen.Log.Error("NUI", "There is a recursive reference! Parent layout(Owner: " + Owner + ")'s HeightSpecification is WrapContent and child layout(Owner: " + childLayout.Owner + ")'s HeightSpecification is 0 with positive weight!");
}
}
}
} // 3RD PHASE foreach
}
maxWidth = Math.Max(maxWidth, maxWidth + (Padding.Start + Padding.End));
maxWidth = Math.Max(maxWidth, SuggestedMinimumWidth.AsRoundedValue());
heightSizeAndState.State = childState.heightState;
SetMeasuredDimensions(ResolveSizeAndState(new LayoutLength(maxWidth), widthMeasureSpec, childState.widthState),
heightSizeAndState);
} // MeasureVertical
protected override void OnMeasure(MeasureSpecification widthMeasureSpec, MeasureSpecification heightMeasureSpec)
{
Extents padding = Padding;
float totalHeight = padding.Top + padding.Bottom;
float totalWidth = padding.Start + padding.End;
MeasuredSize.StateType childWidthState = MeasuredSize.StateType.MeasuredSizeOK;
MeasuredSize.StateType childHeightState = MeasuredSize.StateType.MeasuredSizeOK;
Direction scrollingDirection = Direction.Vertical;
ScrollableBase scrollableBase = this.Owner as ScrollableBase;
if (scrollableBase)
{
scrollingDirection = scrollableBase.ScrollingDirection;
}
// measure child, should be a single scrolling child
foreach (LayoutItem childLayout in LayoutChildren)
{
if (childLayout != null)
{
// Get size of child
// Use an Unspecified MeasureSpecification mode so scrolling child is not restricted to it's parents size in Height (for vertical scrolling)
// or Width for horizontal scrolling
MeasureSpecification unrestrictedMeasureSpec = new MeasureSpecification(heightMeasureSpec.Size, MeasureSpecification.ModeType.Unspecified);
if (scrollingDirection == Direction.Vertical)
{
MeasureChild(childLayout, widthMeasureSpec, unrestrictedMeasureSpec); // Height unrestricted by parent
}
else
{
MeasureChild(childLayout, unrestrictedMeasureSpec, heightMeasureSpec); // Width unrestricted by parent
}
float childWidth = childLayout.MeasuredWidth.Size.AsDecimal();
float childHeight = childLayout.MeasuredHeight.Size.AsDecimal();
// Determine the width and height needed by the children using their given position and size.
// Children could overlap so find the left most and right most child.
Position2D childPosition = childLayout.Owner.Position2D;
float childLeft = childPosition.X;
float childTop = childPosition.Y;
// Store current width and height needed to contain all children.
Extents childMargin = childLayout.Margin;
totalWidth = childWidth + childMargin.Start + childMargin.End;
totalHeight = childHeight + childMargin.Top + childMargin.Bottom;
if (childLayout.MeasuredWidth.State == MeasuredSize.StateType.MeasuredSizeTooSmall)
{
childWidthState = MeasuredSize.StateType.MeasuredSizeTooSmall;
}
if (childLayout.MeasuredWidth.State == MeasuredSize.StateType.MeasuredSizeTooSmall)
{
childHeightState = MeasuredSize.StateType.MeasuredSizeTooSmall;
}
}
}
MeasuredSize widthSizeAndState = ResolveSizeAndState(new LayoutLength(totalWidth), widthMeasureSpec, MeasuredSize.StateType.MeasuredSizeOK);
MeasuredSize heightSizeAndState = ResolveSizeAndState(new LayoutLength(totalHeight), heightMeasureSpec, MeasuredSize.StateType.MeasuredSizeOK);
totalWidth = widthSizeAndState.Size.AsDecimal();
totalHeight = heightSizeAndState.Size.AsDecimal();
// Ensure layout respects it's given minimum size
totalWidth = Math.Max(totalWidth, SuggestedMinimumWidth.AsDecimal());
totalHeight = Math.Max(totalHeight, SuggestedMinimumHeight.AsDecimal());
widthSizeAndState.State = childWidthState;
heightSizeAndState.State = childHeightState;
SetMeasuredDimensions(ResolveSizeAndState(new LayoutLength(totalWidth), widthMeasureSpec, childWidthState),
ResolveSizeAndState(new LayoutLength(totalHeight), heightMeasureSpec, childHeightState));
}
/// <summary>
/// Measure the layout and its content to determine the measured width and the measured height.<br />
/// </summary>
/// <param name="widthMeasureSpec">horizontal space requirements as imposed by the parent.</param>
/// <param name="heightMeasureSpec">vertical space requirements as imposed by the parent.</param>
/// <since_tizen> 6 </since_tizen>
protected override void OnMeasure(MeasureSpecification widthMeasureSpec, MeasureSpecification heightMeasureSpec)
{
var gridWidthMode = widthMeasureSpec.Mode;
var gridHeightMode = heightMeasureSpec.Mode;
int widthSize = (int)widthMeasureSpec.Size.AsRoundedValue();
int heightSize = (int)heightMeasureSpec.Size.AsRoundedValue();
int availableContentWidth;
int availableContentHeight;
int desiredChildHeight;
int desiredChildWidth;
Extents gridLayoutPadding = Padding;
var childCount = LayoutChildren.Count;
// WIDTH SPECIFICATIONS
if (childCount > 0)
{
foreach (LayoutItem childLayout in LayoutChildren)
{
if (childLayout != null)
{
MeasureChild(childLayout, widthMeasureSpec, heightMeasureSpec);
}
}
// Use first child's dimensions for layout measurement
View childOwner = LayoutChildren[0].Owner;
desiredChildHeight = (int)LayoutChildren[0].MeasuredHeight.Size.AsRoundedValue();
desiredChildWidth = (int)LayoutChildren[0].MeasuredWidth.Size.AsRoundedValue();
// If child has a margin then add it to desired size
Extents childMargin = LayoutChildren[0].Margin;
desiredChildHeight += childMargin.Top + childMargin.Bottom;
desiredChildWidth += childMargin.Start + childMargin.End;
_totalWidth = desiredChildWidth * _columns;
// Include padding for max and min checks
_totalWidth += gridLayoutPadding.Start + gridLayoutPadding.End;
// Ensure width does not exceed specified at most width or less than mininum width
_totalWidth = Math.Max(_totalWidth, (int)SuggestedMinimumWidth.AsRoundedValue());
// widthMode EXACTLY so grid must be the given width
if (gridWidthMode == MeasureSpecification.ModeType.Exactly || gridWidthMode == MeasureSpecification.ModeType.AtMost)
{
// In the case of AT_MOST, widthSize is the max limit.
_totalWidth = Math.Min(_totalWidth, widthSize);
}
availableContentWidth = _totalWidth - gridLayoutPadding.Start - gridLayoutPadding.End;
widthSize = _totalWidth;
// HEIGHT SPECIFICATIONS
// heightMode EXACTLY so grid must be the given height
if (gridHeightMode == MeasureSpecification.ModeType.Exactly || gridHeightMode == MeasureSpecification.ModeType.AtMost)
{
if (childCount > 0)
{
_totalHeight = gridLayoutPadding.Top + gridLayoutPadding.Bottom;
for (int i = 0; i < childCount; i += _columns)
{
_totalHeight += desiredChildHeight;
}
// Ensure ourHeight does not exceed specified at most height
_totalHeight = Math.Min(_totalHeight, heightSize);
_totalHeight = Math.Max(_totalHeight, (int)SuggestedMinimumHeight.AsRoundedValue());
heightSize = _totalHeight;
} // Child exists
// In the case of AT_MOST, availableContentHeight is the max limit.
availableContentHeight = heightSize - gridLayoutPadding.Top - gridLayoutPadding.Bottom;
}
else
{
// Grid expands to fit content
// If number of columns AUTO_FIT then set to 1 column.
_columns = (_columns > 0) ? _columns : 1;
// Calculate numbers of rows, round down result as later check for remainder.
_rows = childCount / _columns;
// If number of cells not cleanly dividable by columns, add another row to house remainder cells.
_rows += (childCount % _columns > 0) ? 1 : 0;
heightSize = desiredChildHeight * _rows + gridLayoutPadding.Top + gridLayoutPadding.Bottom;
availableContentHeight = heightSize - gridLayoutPadding.Top - gridLayoutPadding.Bottom;
}
// If number of columns not defined
DetermineNumberOfColumns(availableContentWidth);
// Locations define the start, end,top and bottom of each cell.
_locations.CalculateLocations(_columns, availableContentWidth, availableContentHeight, childCount);
} // Children exists
SetMeasuredDimensions(ResolveSizeAndState(new LayoutLength(widthSize + Padding.Start + Padding.End), widthMeasureSpec, MeasuredSize.StateType.MeasuredSizeOK),
ResolveSizeAndState(new LayoutLength(heightSize + Padding.Top + Padding.Bottom), heightMeasureSpec, MeasuredSize.StateType.MeasuredSizeOK));
}
private int CalculateHorizontalSize(MeasureSpecification.ModeType gridWidthMode, MeasureSpecification.ModeType gridHeightMode, int widthSize, int heightSize)
{
int availableContentWidth;
int availableContentHeight;
int desiredChildHeight;
int desiredChildWidth;
Extents gridLayoutPadding = Padding;
var childCount = LayoutChildren.Count;
// Use first child's dimensions for layout measurement
View childOwner = LayoutChildren[0].Owner;
desiredChildHeight = (int)LayoutChildren[0].MeasuredHeight.Size.AsRoundedValue();
desiredChildWidth = (int)LayoutChildren[0].MeasuredWidth.Size.AsRoundedValue();
// If child has a margin then add it to desired size
Extents childMargin = LayoutChildren[0].Margin;
desiredChildHeight += childMargin.Top + childMargin.Bottom;
desiredChildWidth += childMargin.Start + childMargin.End;
_totalHeight = desiredChildHeight * _rows;
_totalHeight += gridLayoutPadding.Top + gridLayoutPadding.Bottom;
_totalHeight = Math.Max(_totalHeight, (int)SuggestedMinimumHeight.AsRoundedValue());
if (gridHeightMode == MeasureSpecification.ModeType.Exactly || gridHeightMode == MeasureSpecification.ModeType.AtMost)
{
_totalHeight = Math.Min(_totalHeight, heightSize);
}
availableContentHeight = _totalHeight - gridLayoutPadding.Top - gridLayoutPadding.Bottom;
heightSize = _totalHeight;
if (gridWidthMode == MeasureSpecification.ModeType.Exactly || gridWidthMode == MeasureSpecification.ModeType.AtMost)
{
if (childCount > 0)
{
_totalWidth = gridLayoutPadding.Start + gridLayoutPadding.End;
for (int i = 0; i < childCount; i += _rows)
{
_totalWidth += desiredChildWidth;
}
_totalWidth = Math.Min(_totalWidth, widthSize);
_totalWidth = Math.Max(_totalWidth, (int)SuggestedMinimumWidth.AsRoundedValue());
widthSize = _totalWidth;
} // Child exists
// In the case of AT_MOST, availableContentHeight is the max limit.
availableContentWidth = widthSize - gridLayoutPadding.Start - gridLayoutPadding.End;
}
else
{
_rows = (_rows > 0) ? _rows : 1;
_columns = childCount / _rows;
_columns += (childCount % _rows > 0) ? 1 : 0;
widthSize = desiredChildWidth * _columns + gridLayoutPadding.Start + gridLayoutPadding.End;
availableContentWidth = widthSize - gridLayoutPadding.Start - gridLayoutPadding.End;
}
// If number of rows not defined
DetermineNumberOfRows(availableContentHeight);
_locations.CalculateLocationsRow(_rows, availableContentWidth, availableContentHeight, childCount);
return(availableContentWidth);
}
protected override void OnMeasure(MeasureSpecification widthMeasureSpec, MeasureSpecification heightMeasureSpec)
{
float totalHeight = 0.0f;
float totalWidth = 0.0f;
HeightAndWidthState childState = new HeightAndWidthState(MeasuredSize.StateType.MeasuredSizeOK,
MeasuredSize.StateType.MeasuredSizeOK);
float minPositionX = 0.0f;
float minPositionY = 0.0f;
float maxPositionX = 0.0f;
float maxPositionY = 0.0f;
// measure children
foreach (LayoutItem childLayout in _children)
{
if (childLayout != null)
{
// Get size of child
MeasureChild(childLayout, widthMeasureSpec, heightMeasureSpec);
float childWidth = childLayout.MeasuredWidth.Size.AsDecimal();
float childHeight = childLayout.MeasuredHeight.Size.AsDecimal();
// Determine the width and height needed by the children using their given position and size.
// Children could overlap so find the left most and right most child.
Position2D childPosition = childLayout.Owner.Position2D;
float childLeft = childPosition.X;
float childTop = childPosition.Y;
minPositionX = Math.Min(minPositionX, childLeft);
maxPositionX = Math.Max(maxPositionX, childLeft + childWidth);
// Children could overlap so find the highest and lowest child.
minPositionY = Math.Min(minPositionY, childTop);
maxPositionY = Math.Max(maxPositionY, childTop + childHeight);
// Store current width and height needed to contain all children.
totalWidth = maxPositionX - minPositionX;
totalHeight = maxPositionY - minPositionY;
if (childLayout.MeasuredWidthAndState.State == MeasuredSize.StateType.MeasuredSizeTooSmall)
{
childState.widthState = MeasuredSize.StateType.MeasuredSizeTooSmall;
}
if (childLayout.MeasuredWidthAndState.State == MeasuredSize.StateType.MeasuredSizeTooSmall)
{
childState.heightState = MeasuredSize.StateType.MeasuredSizeTooSmall;
}
}
}
MeasuredSize widthSizeAndState = ResolveSizeAndState(new LayoutLength(totalWidth), widthMeasureSpec, MeasuredSize.StateType.MeasuredSizeOK);
MeasuredSize heightSizeAndState = ResolveSizeAndState(new LayoutLength(totalHeight), heightMeasureSpec, MeasuredSize.StateType.MeasuredSizeOK);
totalWidth = widthSizeAndState.Size.AsDecimal();
totalHeight = heightSizeAndState.Size.AsDecimal();
// Ensure layout respects it's given minimum size
totalWidth = Math.Max(totalWidth, SuggestedMinimumWidth.AsDecimal());
totalHeight = Math.Max(totalHeight, SuggestedMinimumHeight.AsDecimal());
widthSizeAndState.State = childState.widthState;
heightSizeAndState.State = childState.heightState;
SetMeasuredDimensions(ResolveSizeAndState(new LayoutLength(totalWidth), widthMeasureSpec, childState.widthState),
ResolveSizeAndState(new LayoutLength(totalHeight), heightMeasureSpec, childState.heightState));
}
} // MeasureHorizontally
void MeasureVertical(MeasureSpecification widthMeasureSpec, MeasureSpecification heightMeasureSpec)
{
var widthMode = widthMeasureSpec.Mode;
var heightMode = heightMeasureSpec.Mode;
bool isExactly = (heightMode == MeasureSpecification.ModeType.Exactly);
bool matchWidth = false;
bool allFillParent = true;
float maxWidth = 0.0f;
float alternativeMaxWidth = 0.0f;
float weightedMaxWidth = 0.0f;
float totalWeight = 0.0f;
// Reset total length
_totalLength = 0.0f;
LayoutLength usedExcessSpace = new LayoutLength(0);
HeightAndWidthState childState = new HeightAndWidthState(MeasuredSize.StateType.MeasuredSizeOK,
MeasuredSize.StateType.MeasuredSizeTooSmall);
// measure children, and determine if further resolution is required
// 1st phase:
// We cycle through all children and measure children with weight 0 (non weighted children) according to their specs
// to accumulate total used space in mTotalLength based on measured sizes and margins.
// Weighted children are not measured at this phase.
// Available space for weighted children will be calculated in the phase 2 based on mTotalLength value.
uint index = 0;
foreach (LayoutItem childLayout in _children)
{
LayoutLength childDesiredWidth = new LayoutLength(childLayout.Owner.WidthSpecification);
LayoutLength childDesiredHeight = new LayoutLength(childLayout.Owner.HeightSpecification);
float childWeight = childLayout.Owner.Weight;
Extents childMargin = childLayout.Margin;
totalWeight += childWeight;
bool useExcessSpace = (childDesiredHeight.AsRoundedValue() == 0) && (childWeight > 0);
if (isExactly && useExcessSpace)
{
LayoutLength totalLength = new LayoutLength(_totalLength);
_totalLength = Math.Max(totalLength.AsDecimal(), (totalLength + childMargin.Top + childMargin.Bottom).AsDecimal());
}
else
{
LayoutLength childHeight = new LayoutLength(0);
if (useExcessSpace)
{
// The heightMode is either Unspecified or AtMost, and
// this child is only laid out using excess space. Measure
// using WrapContent so that we can find out the view's
// optimal height. We'll restore the original height of 0
// after measurement.
MeasureSpecification childWidthMeasureSpec = GetChildMeasureSpecification(widthMeasureSpec,
new LayoutLength(childLayout.Padding.Start + childLayout.Padding.End),
childDesiredWidth);
MeasureSpecification childHeightMeasureSpec = GetChildMeasureSpecification(heightMeasureSpec,
new LayoutLength(childLayout.Padding.Top + childLayout.Padding.Bottom),
new LayoutLength(LayoutParamPolicies.WrapContent));
childLayout.Measure(childWidthMeasureSpec, childHeightMeasureSpec);
childHeight = childLayout.MeasuredHeight.Size;
usedExcessSpace += childHeight;
}
else
{
MeasureChild(childLayout, widthMeasureSpec, heightMeasureSpec);
childHeight = childLayout.MeasuredHeight.Size;
}
float length = (childHeight + childMargin.Top + childMargin.Bottom).AsDecimal();
float cellPadding = CellPadding.Height;
// No need to add cell padding to the end of last item.
if (index >= _children.Count - 1)
{
cellPadding = 0.0f;
}
_totalLength = Math.Max(_totalLength, _totalLength + length + cellPadding);
}
bool matchWidthLocally = false;
if (widthMode != MeasureSpecification.ModeType.Exactly && childDesiredWidth == new LayoutLength(LayoutParamPolicies.MatchParent))
{
// Will have to re-measure at least this child when we know exact height.
matchWidth = true;
matchWidthLocally = true;
}
float marginWidth = (childLayout.Margin.Start) + (childLayout.Margin.End);
LayoutLength childWidth = new LayoutLength(childLayout.MeasuredWidth.Size.AsDecimal() + marginWidth);
// was combineMeasuredStates()
if (childLayout.MeasuredWidthAndState.State == MeasuredSize.StateType.MeasuredSizeTooSmall)
{
childState.widthState = MeasuredSize.StateType.MeasuredSizeTooSmall;
}
if (childLayout.MeasuredHeightAndState.State == MeasuredSize.StateType.MeasuredSizeTooSmall)
{
childState.heightState = MeasuredSize.StateType.MeasuredSizeTooSmall;
}
maxWidth = (Math.Max(maxWidth, childWidth.AsDecimal()));
allFillParent = (allFillParent && (childDesiredWidth == new LayoutLength(LayoutParamPolicies.MatchParent)));
float widthforWeight = childWidth.AsDecimal();
if (matchWidthLocally)
{
widthforWeight = marginWidth;
}
if (childWeight > 0)
{
/*
* Widths of weighted Views are bogus if we end up remeasuring, so keep them separate.
*/
weightedMaxWidth = Math.Max(weightedMaxWidth, widthforWeight);
}
else
{
alternativeMaxWidth = Math.Max(alternativeMaxWidth, widthforWeight);
}
} // foreach
Extents padding = Padding;
_totalLength += padding.Top + padding.Bottom;
LayoutLength heightSize = new LayoutLength(_totalLength);
heightSize = new LayoutLength(Math.Max(heightSize.AsDecimal(), SuggestedMinimumHeight.AsDecimal()));
MeasuredSize heightSizeAndState = ResolveSizeAndState(heightSize, heightMeasureSpec, MeasuredSize.StateType.MeasuredSizeOK);
heightSize = heightSizeAndState.Size;
// Either expand children with weight to take up available space or
// shrink them if they extend beyond our current bounds. If we skipped
// measurement on any children, we need to measure them now.
// 2nd phase:
// We cycle through weighted children now (children with weight > 0).
// The children are measured with exact size equal to their share of the available space based on their weights.
// TotalLength is updated to include weighted children measured sizes.
float remainingExcess = heightSize.AsDecimal() - _totalLength + usedExcessSpace.AsDecimal();
if (remainingExcess != 0 && totalWeight > 0.0f)
{
float remainingWeightSum = totalWeight;
_totalLength = 0;
foreach (LayoutItem childLayout in _children)
{
int desiredWidth = childLayout.Owner.WidthSpecification;
int desiredHeight = childLayout.Owner.HeightSpecification;
float childWeight = childLayout.Owner.Weight;
Extents childMargin = childLayout.Margin;
float childHeight = 0;
if (childWeight > 0)
{
float share = (childWeight * remainingExcess) / remainingWeightSum;
remainingExcess -= share;
remainingWeightSum -= childWeight;
// Always lay out weighted elements with intrinsic size regardless of the parent spec
// for consistency between specs.
if (desiredHeight == 0)
{
// This child needs to be laid out from scratch using
// only its share of excess space.
childHeight = share;
}
else
{
// This child had some intrinsic width to which we
// need to add its share of excess space.
childHeight = childLayout.MeasuredHeight.Size.AsDecimal() + share;
}
MeasureSpecification childWidthMeasureSpec = GetChildMeasureSpecification(widthMeasureSpec,
new LayoutLength(Padding.Start + Padding.End),
new LayoutLength(desiredWidth));
MeasureSpecification childHeightMeasureSpec = new MeasureSpecification(new LayoutLength(childHeight), MeasureSpecification.ModeType.Exactly);
childLayout.Measure(childWidthMeasureSpec, childHeightMeasureSpec);
// Child may now not fit in vertical dimension.
if (childLayout.MeasuredHeightAndState.State == MeasuredSize.StateType.MeasuredSizeTooSmall)
{
childState.heightState = MeasuredSize.StateType.MeasuredSizeTooSmall;
}
}
bool matchWidthLocally = false;
if (widthMode != MeasureSpecification.ModeType.Exactly && desiredWidth == (int)ChildLayoutData.MatchParent)
{
// Will have to re-measure at least this child when we know exact height.
matchWidth = true;
matchWidthLocally = true;
}
float marginWidth = childMargin.Start + childMargin.End;
float childWidth = childLayout.MeasuredWidth.Size.AsDecimal() + marginWidth;
maxWidth = Math.Max(maxWidth, childWidth);
allFillParent = allFillParent && desiredWidth == (int)ChildLayoutData.MatchParent;
alternativeMaxWidth = Math.Max(alternativeMaxWidth, matchWidthLocally ? marginWidth : childWidth);
childHeight = childLayout.MeasuredHeight.Size.AsDecimal();
float length = childHeight + childMargin.Top + childMargin.Bottom;
float cellPadding = CellPadding.Height;
// No need to add cell padding to the end of last item.
if (index >= _children.Count - 1)
{
cellPadding = 0.0f;
}
_totalLength = Math.Max(_totalLength, _totalLength + length + cellPadding);
} // foreach
// Add in our padding
_totalLength += Padding.Top + Padding.Bottom;
}
else
{
alternativeMaxWidth = Math.Max(alternativeMaxWidth, weightedMaxWidth);
}
if (!allFillParent && widthMode != MeasureSpecification.ModeType.Exactly)
{
maxWidth = alternativeMaxWidth;
}
maxWidth += padding.Start + padding.End;
maxWidth = Math.Max(maxWidth, SuggestedMinimumWidth.AsRoundedValue());
heightSizeAndState.State = childState.heightState;
SetMeasuredDimensions(ResolveSizeAndState(new LayoutLength(maxWidth), widthMeasureSpec, childState.widthState),
heightSizeAndState);
if (matchWidth)
{
ForceUniformWidth(_children.Count, heightMeasureSpec);
}
} // MeasureVertically
private void MeasureHorizontal(MeasureSpecification widthMeasureSpec, MeasureSpecification heightMeasureSpec)
{
var widthMode = widthMeasureSpec.Mode;
var heightMode = heightMeasureSpec.Mode;
bool isExactly = (widthMode == MeasureSpecification.ModeType.Exactly);
bool matchHeight = false;
bool allFillParent = true;
float maxHeight = 0.0f;
float alternativeMaxHeight = 0.0f;
float weightedMaxHeight = 0.0f;
float totalWeight = 0.0f;
// Reset total length
_totalLength = 0.0f;
LayoutLength usedExcessSpace = new LayoutLength(0);
HeightAndWidthState childState = new HeightAndWidthState(MeasuredSize.StateType.MeasuredSizeOK,
MeasuredSize.StateType.MeasuredSizeOK);
// Measure children, and determine if further resolution is required
// 1st phase:
// We cycle through all children and measure children with weight 0 (non weighted children) according to their specs
// to accumulate total used space in totalLength based on measured sizes and margins.
// Weighted children are not measured at this phase.
// Available space for weighted children will be calculated in the phase 2 based on totalLength value.
foreach (LayoutItem childLayout in _children)
{
LayoutLength childDesiredWidth = new LayoutLength(childLayout.Owner.WidthSpecification);
LayoutLength childDesiredHeight = new LayoutLength(childLayout.Owner.HeightSpecification);
float childWeight = childLayout.Owner.Weight;
Extents childMargin = childLayout.Margin;
totalWeight += childWeight;
bool useExcessSpace = (childDesiredWidth.AsRoundedValue() == 0) && (childWeight > 0);
if (isExactly && useExcessSpace)
{
_totalLength += childMargin.Start + childMargin.End;
}
else
{
if (useExcessSpace)
{
// The widthMode is either UNSPECIFIED or AT_MOST, and
// this child is only laid out using excess space. Measure
// using WRAP_CONTENT so that we can find out the view's
// optimal width.
MeasureSpecification childWidthMeasureSpec = GetChildMeasureSpecification(widthMeasureSpec, new LayoutLength(childLayout.Padding.Start + childLayout.Padding.End),
new LayoutLength(LayoutParamPolicies.WrapContent));
MeasureSpecification childHeightMeasureSpec = GetChildMeasureSpecification(heightMeasureSpec, new LayoutLength(childLayout.Padding.Top + childLayout.Padding.Bottom),
childDesiredHeight);
childLayout.Measure(childWidthMeasureSpec, childHeightMeasureSpec);
usedExcessSpace += childLayout.MeasuredWidth.Size;
}
else
{
MeasureChild(childLayout, widthMeasureSpec, heightMeasureSpec);
}
LayoutLength childWidth = childLayout.MeasuredWidth.Size;
LayoutLength length = childWidth + childMargin.Start + childMargin.End;
if (isExactly)
{
_totalLength += length.AsDecimal();
}
else
{
_totalLength = Math.Max(_totalLength, _totalLength + length.AsDecimal() + CellPadding.Width);
}
}
bool matchHeightLocally = false;
if (heightMode != MeasureSpecification.ModeType.Exactly && (int)childDesiredHeight.AsRoundedValue() == LayoutParamPolicies.MatchParent)
{
// Will have to re-measure at least this child when we know exact height.
matchHeight = true;
matchHeightLocally = true;
}
LayoutLength marginHeight = new LayoutLength(childMargin.Top + childMargin.Bottom);
LayoutLength childHeight = childLayout.MeasuredHeight.Size + marginHeight;
if (childLayout.MeasuredWidthAndState.State == MeasuredSize.StateType.MeasuredSizeTooSmall)
{
childState.widthState = MeasuredSize.StateType.MeasuredSizeTooSmall;
}
if (childLayout.MeasuredHeightAndState.State == MeasuredSize.StateType.MeasuredSizeTooSmall)
{
childState.heightState = MeasuredSize.StateType.MeasuredSizeTooSmall;
}
maxHeight = Math.Max(maxHeight, childHeight.AsDecimal());
allFillParent = (allFillParent && childDesiredHeight.AsRoundedValue() == LayoutParamPolicies.MatchParent);
if (childWeight > 0)
{
/*
* Heights of weighted Views are bogus if we end up
* remeasuring, so keep them separate.
*/
weightedMaxHeight = Math.Max(weightedMaxHeight, matchHeightLocally ? marginHeight.AsDecimal() : childHeight.AsDecimal());
}
else
{
alternativeMaxHeight = Math.Max(alternativeMaxHeight, matchHeightLocally ? marginHeight.AsDecimal() : childHeight.AsDecimal());
}
} // foreach
Extents padding = Padding;
_totalLength += padding.Start + padding.End;
LayoutLength widthSize = new LayoutLength(_totalLength);
widthSize = new LayoutLength(Math.Max(widthSize.AsDecimal(), SuggestedMinimumWidth.AsDecimal()));
MeasuredSize widthSizeAndState = ResolveSizeAndState(widthSize, widthMeasureSpec, MeasuredSize.StateType.MeasuredSizeOK);
widthSize = widthSizeAndState.Size;
if (!allFillParent && heightMode != MeasureSpecification.ModeType.Exactly)
{
maxHeight = alternativeMaxHeight;
}
maxHeight += padding.Top + padding.Bottom;
maxHeight = Math.Max(maxHeight, SuggestedMinimumHeight.AsRoundedValue());
widthSizeAndState.State = childState.widthState;
SetMeasuredDimensions(widthSizeAndState,
ResolveSizeAndState(new LayoutLength(maxHeight), heightMeasureSpec, childState.heightState));
if (matchHeight)
{
ForceUniformHeight(_children.Count, widthMeasureSpec);
}
} // MeasureHorizontally
