public static void CreateHolesWithUserDefinedPattern(SolidEdgePart.PartDocument partDocument)
{
SolidEdgePart.RefPlanes refplanes = null;
SolidEdgePart.RefPlane refplane = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
SolidEdgePart.HoleDataCollection holeDataCollection = null;
SolidEdgePart.ProfileSets profileSets = null;
SolidEdgePart.ProfileSet profileSet = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgePart.Holes2d holes2d = null;
SolidEdgePart.Hole2d hole2d = null;
SolidEdgePart.Holes holes = null;
SolidEdgePart.Hole hole = null;
long profileStatus = 0;
List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>();
SolidEdgePart.UserDefinedPatterns userDefinedPatterns = null;
SolidEdgePart.UserDefinedPattern userDefinedPattern = null;
// Get a reference to the RefPlanes collection.
refplanes = partDocument.RefPlanes;
// Get a reference to front RefPlane.
refplane = refplanes.GetFrontPlane();
List <double[]> linesArray = new List <double[]>();
linesArray.Add(new double[] { 0, 0, 0.08, 0 });
linesArray.Add(new double[] { 0.08, 0, 0.08, 0.06 });
linesArray.Add(new double[] { 0.08, 0.06, 0.064, 0.06 });
linesArray.Add(new double[] { 0.064, 0.06, 0.064, 0.02 });
linesArray.Add(new double[] { 0.064, 0.02, 0.048, 0.02 });
linesArray.Add(new double[] { 0.048, 0.02, 0.048, 0.06 });
linesArray.Add(new double[] { 0.048, 0.06, 0.032, 0.06 });
linesArray.Add(new double[] { 0.032, 0.06, 0.032, 0.02 });
linesArray.Add(new double[] { 0.032, 0.02, 0.016, 0.02 });
linesArray.Add(new double[] { 0.016, 0.02, 0.016, 0.06 });
linesArray.Add(new double[] { 0.016, 0.06, 0, 0.06 });
linesArray.Add(new double[] { 0, 0.06, 0, 0 });
// Call helper method to create the actual geometry.
CreateFiniteExtrudedProtrusion(partDocument, refplane, linesArray.ToArray(), SolidEdgePart.FeaturePropertyConstants.igRight, 0.005);
// Get a reference to the Models collection.
models = partDocument.Models;
// Get a reference to Model.
model = models.Item(1);
// Get a reference to the ProfileSets collection.
profileSets = partDocument.ProfileSets;
// Add new ProfileSet.
profileSet = profileSets.Add();
// Get a reference to the Profiles collection.
profiles = profileSet.Profiles;
// Add new Profile.
profile = profiles.Add(refplane);
// Get a reference to the Holes2d collection.
holes2d = profile.Holes2d;
double[,] holeMatrix = new double[, ]
{
//{x, y}
{ 0.01, 0.01 },
{ 0.02, 0.01 },
{ 0.03, 0.01 },
{ 0.04, 0.01 },
{ 0.05, 0.01 },
{ 0.06, 0.01 },
{ 0.07, 0.01 }
};
// Draw the Base Profile.
for (int i = 0; i <= holeMatrix.GetUpperBound(0); i++)
{
// Add new Hole2d.
hole2d = holes2d.Add(
XCenter: holeMatrix[i, 0],
YCenter: holeMatrix[i, 1]);
}
// Hide the profile.
profile.Visible = false;
// Close profile.
profileStatus = profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Get a reference to the ProfileSet.
profileSet = (SolidEdgePart.ProfileSet)profile.Parent;
// Get a reference to the Profiles collection.
profiles = profileSet.Profiles;
// Add profiles to list for AddByProfiles().
for (int i = 1; i <= profiles.Count; i++)
{
profileList.Add(profiles.Item(i));
}
// Get a reference to the HoleDataCollection collection.
holeDataCollection = partDocument.HoleDataCollection;
// Add new HoleData.
SolidEdgePart.HoleData holeData = holeDataCollection.Add(
HoleType: SolidEdgePart.FeaturePropertyConstants.igRegularHole,
HoleDiameter: 0.005,
BottomAngle: 90);
// Get a reference to the Holes collection.
holes = model.Holes;
// Add hole.
hole = holes.AddFinite(
Profile: profile,
ProfilePlaneSide: SolidEdgePart.FeaturePropertyConstants.igRight,
FiniteDepth: 0.005,
Data: holeData);
// Get a reference to the UserDefinedPatterns collection.
userDefinedPatterns = model.UserDefinedPatterns;
// Create the user defined pattern.
userDefinedPattern = userDefinedPatterns.AddByProfiles(
NumberOfProfiles: profileList.Count,
ProfilesArray: profileList.ToArray(),
SeedFeature: hole);
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgePart.SheetMetalDocument sheetMetalDocument = null;
SolidEdgePart.RefPlanes refplanes = null;
SolidEdgePart.RefPlane refplane = null;
SolidEdgePart.Model model = null;
SolidEdgePart.HoleDataCollection holeDataCollection = null;
SolidEdgePart.ProfileSets profileSets = null;
SolidEdgePart.ProfileSet profileSet = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgePart.Holes2d holes2d = null;
SolidEdgePart.Hole2d hole2d = null;
SolidEdgePart.Holes holes = null;
SolidEdgePart.Hole hole = null;
long profileStatus = 0;
List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>();
SolidEdgePart.UserDefinedPatterns userDefinedPatterns = null;
SolidEdgePart.UserDefinedPattern userDefinedPattern = null;
SolidEdgeFramework.SelectSet selectSet = null;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Get a reference to the Documents collection.
documents = application.Documents;
// Create a new sheetmetal document.
sheetMetalDocument = documents.AddSheetMetalDocument();
// Always a good idea to give SE a chance to breathe.
application.DoIdle();
// Call helper method to create the actual geometry.
model = SheetMetalHelper.CreateBaseTabByCircle(sheetMetalDocument);
// Get a reference to the RefPlanes collection.
refplanes = sheetMetalDocument.RefPlanes;
// Get a reference to front RefPlane.
refplane = refplanes.GetFrontPlane();
// Get a reference to the ProfileSets collection.
profileSets = sheetMetalDocument.ProfileSets;
// Add new ProfileSet.
profileSet = profileSets.Add();
// Get a reference to the Profiles collection.
profiles = profileSet.Profiles;
// Add new Profile.
profile = profiles.Add(refplane);
// Get a reference to the Holes2d collection.
holes2d = profile.Holes2d;
// This creates a cross pattern of holes.
double[,] holeMatrix = new double[, ]
{
//{x, y}
{ 0.00, 0.00 },
{ -0.01, 0.00 },
{ -0.02, 0.00 },
{ -0.03, 0.00 },
{ -0.04, 0.00 },
{ 0.01, 0.00 },
{ 0.02, 0.00 },
{ 0.03, 0.00 },
{ 0.04, 0.00 },
{ 0.00, -0.01 },
{ 0.00, -0.02 },
{ 0.00, -0.03 },
{ 0.00, -0.04 },
{ 0.00, 0.01 },
{ 0.00, 0.02 },
{ 0.00, 0.03 },
{ 0.00, 0.04 }
};
// Draw the Base Profile.
for (int i = 0; i <= holeMatrix.GetUpperBound(0); i++)
{
// Add new Hole2d.
hole2d = holes2d.Add(
XCenter: holeMatrix[i, 0],
YCenter: holeMatrix[i, 1]);
}
// Hide the profile.
profile.Visible = false;
// Close profile.
profileStatus = profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Get a reference to the ProfileSet.
profileSet = (SolidEdgePart.ProfileSet)profile.Parent;
// Get a reference to the Profiles collection.
profiles = profileSet.Profiles;
// Add profiles to list for AddByProfiles().
for (int i = 1; i <= profiles.Count; i++)
{
profileList.Add(profiles.Item(i));
}
// Get a reference to the HoleDataCollection collection.
holeDataCollection = sheetMetalDocument.HoleDataCollection;
// Add new HoleData.
SolidEdgePart.HoleData holeData = holeDataCollection.Add(
HoleType: SolidEdgePart.FeaturePropertyConstants.igRegularHole,
HoleDiameter: 0.005,
BottomAngle: 90);
// Get a reference to the Holes collection.
holes = model.Holes;
// Add hole.
hole = holes.AddFinite(
Profile: profile,
ProfilePlaneSide: SolidEdgePart.FeaturePropertyConstants.igRight,
FiniteDepth: 0.005,
Data: holeData);
// Get a reference to the UserDefinedPatterns collection.
userDefinedPatterns = model.UserDefinedPatterns;
// Create the user defined pattern.
userDefinedPattern = userDefinedPatterns.AddByProfiles(
NumberOfProfiles: profileList.Count,
ProfilesArray: profileList.ToArray(),
SeedFeature: hole);
// Get a reference to the ActiveSelectSet.
selectSet = application.ActiveSelectSet;
// Empty ActiveSelectSet.
selectSet.RemoveAll();
// Add new UserDefinedPattern to ActiveSelectSet.
selectSet.Add(userDefinedPattern);
// Switch to ISO view.
application.StartCommand(SolidEdgeConstants.SheetMetalCommandConstants.SheetMetalViewISOView);
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
static void CreateHolesWithUserDefinedPattern(SolidEdgePart.SheetMetalDocument sheetMetalDocument)
{
SolidEdgePart.RefPlanes refplanes = null;
SolidEdgePart.RefPlane refplane = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
SolidEdgePart.HoleDataCollection holeDataCollection = null;
SolidEdgePart.ProfileSets profileSets = null;
SolidEdgePart.ProfileSet profileSet = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgePart.Holes2d holes2d = null;
SolidEdgePart.Hole2d hole2d = null;
SolidEdgePart.Holes holes = null;
SolidEdgePart.Hole hole = null;
long profileStatus = 0;
List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>();
SolidEdgePart.UserDefinedPatterns userDefinedPatterns = null;
SolidEdgePart.UserDefinedPattern userDefinedPattern = null;
// Get a reference to the RefPlanes collection.
refplanes = sheetMetalDocument.RefPlanes;
// Get a reference to Right (yz) plane.
refplane = refplanes.Item(3);
// Get a reference to the Models collection.
models = sheetMetalDocument.Models;
// Get a reference to Model.
model = models.Item(1);
// Get a reference to the ProfileSets collection.
profileSets = sheetMetalDocument.ProfileSets;
// Add new ProfileSet.
profileSet = profileSets.Add();
// Get a reference to the Profiles collection.
profiles = profileSet.Profiles;
// Add new Profile.
profile = profiles.Add(refplane);
// Get a reference to the Holes2d collection.
holes2d = profile.Holes2d;
// This creates a cross pattern of holes.
double[,] holeMatrix = new double[, ]
{
//{x, y}
{ 0.00, 0.00 },
{ -0.01, 0.00 },
{ -0.02, 0.00 },
{ -0.03, 0.00 },
{ -0.04, 0.00 },
{ 0.01, 0.00 },
{ 0.02, 0.00 },
{ 0.03, 0.00 },
{ 0.04, 0.00 },
{ 0.00, -0.01 },
{ 0.00, -0.02 },
{ 0.00, -0.03 },
{ 0.00, -0.04 },
{ 0.00, 0.01 },
{ 0.00, 0.02 },
{ 0.00, 0.03 },
{ 0.00, 0.04 }
};
// Draw the Base Profile.
for (int i = 0; i <= holeMatrix.GetUpperBound(0); i++)
{
// Add new Hole2d.
hole2d = holes2d.Add(
XCenter: holeMatrix[i, 0],
YCenter: holeMatrix[i, 1]);
}
// Hide the profile.
profile.Visible = false;
// Close profile.
profileStatus = profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Get a reference to the ProfileSet.
profileSet = (SolidEdgePart.ProfileSet)profile.Parent;
// Get a reference to the Profiles collection.
profiles = profileSet.Profiles;
// Add profiles to list for AddByProfiles().
for (int i = 1; i <= profiles.Count; i++)
{
profileList.Add(profiles.Item(i));
}
// Get a reference to the HoleDataCollection collection.
holeDataCollection = sheetMetalDocument.HoleDataCollection;
// Add new HoleData.
SolidEdgePart.HoleData holeData = holeDataCollection.Add(
HoleType: SolidEdgePart.FeaturePropertyConstants.igRegularHole,
HoleDiameter: 0.005,
BottomAngle: 90);
// Get a reference to the Holes collection.
holes = model.Holes;
// Add hole.
hole = holes.AddFinite(
Profile: profile,
ProfilePlaneSide: SolidEdgePart.FeaturePropertyConstants.igRight,
FiniteDepth: 0.005,
Data: holeData);
// Get a reference to the UserDefinedPatterns collection.
userDefinedPatterns = model.UserDefinedPatterns;
// Create the user defined pattern.
userDefinedPattern = userDefinedPatterns.AddByProfiles(
NumberOfProfiles: profileList.Count,
ProfilesArray: profileList.ToArray(),
SeedFeature: hole);
}
