static void AddLineAndDimension(SolidEdgeDraft.DraftDocument draftDocument)
{
SolidEdgeDraft.Sheet sheet = null;
SolidEdgeFrameworkSupport.Lines2d lines2d = null;
SolidEdgeFrameworkSupport.Line2d line2d = null;
SolidEdgeFrameworkSupport.Dimensions dimensions = null;
SolidEdgeFrameworkSupport.Dimension dimension = null;
SolidEdgeFrameworkSupport.DimStyle dimStyle = null;
// Get a reference to the active sheet.
sheet = draftDocument.ActiveSheet;
// Get a reference to the Lines2d collection.
lines2d = sheet.Lines2d;
// Draw a new line.
line2d = lines2d.AddBy2Points(
x1: 0.2,
y1: 0.2,
x2: 0.3,
y2: 0.2);
// Get a reference to the Dimensions collection.
dimensions = (SolidEdgeFrameworkSupport.Dimensions)sheet.Dimensions;
// Add a dimension to the line.
dimension = dimensions.AddLength(line2d);
// Get a reference to the dimension style.
// DimStyle has a ton of options...
dimStyle = dimension.Style;
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgeDraft.DraftDocument draftDocument = null;
SolidEdgeDraft.Sheet sheet = null;
SolidEdgeFrameworkSupport.Lines2d lines2d = null;
SolidEdgeFrameworkSupport.Line2d line2d = null;
SolidEdgeFrameworkSupport.Dimensions dimensions = null;
SolidEdgeFrameworkSupport.Dimension dimension = null;
SolidEdgeFrameworkSupport.DimStyle dimStyle = null;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Get a reference to the documents collection.
documents = application.Documents;
// Create a new draft document.
draftDocument = documents.AddDraftDocument();
// Get a reference to the active sheet.
sheet = draftDocument.ActiveSheet;
// Get a reference to the Lines2d collection.
lines2d = sheet.Lines2d;
// Draw a new line.
line2d = lines2d.AddBy2Points(
x1: 0.2,
y1: 0.2,
x2: 0.3,
y2: 0.2);
// Get a reference to the Dimensions collection.
dimensions = (SolidEdgeFrameworkSupport.Dimensions)sheet.Dimensions;
// Add a dimension to the line.
dimension = dimensions.AddLength(line2d);
// Get a reference to the dimension style.
// DimStyle has a ton of options...
dimStyle = dimension.Style;
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
static void AddPartViewAndDimension(SolidEdgeDraft.DraftDocument draftDocument)
{
SolidEdgeDraft.Sheet sheet = null;
SolidEdgeDraft.ModelLinks modelLinks = null;
SolidEdgeDraft.ModelLink modelLink = null;
SolidEdgeDraft.DrawingViews drawingViews = null;
SolidEdgeDraft.DrawingView drawingView = null;
DirectoryInfo trainingDirectory = GetTrainingDirectory();
string fileName = Path.Combine(trainingDirectory.FullName, "2holebar.par");
SolidEdgeDraft.DVLines2d dvLines2d = null;
SolidEdgeDraft.DVLine2d dvLine2d = null;
SolidEdgeFrameworkSupport.Dimensions dimensions = null;
SolidEdgeFrameworkSupport.Dimension dimension = null;
SolidEdgeFrameworkSupport.DimStyle dimStyle = null;
// Get a reference to the active sheet.
sheet = draftDocument.ActiveSheet;
// Get a reference to the ModelLinks collection.
modelLinks = draftDocument.ModelLinks;
// Add a new model link.
modelLink = modelLinks.Add(fileName);
// Get a reference to the DrawingViews collection.
drawingViews = sheet.DrawingViews;
// Add a new part drawing view.
drawingView = drawingViews.AddPartView(
From: modelLink,
Orientation: SolidEdgeDraft.ViewOrientationConstants.igDimetricTopBackLeftView,
Scale: 5.0,
x: 0.4,
y: 0.4,
ViewType: SolidEdgeDraft.PartDrawingViewTypeConstants.sePartDesignedView);
// Get a reference to the DVLines2d collection.
dvLines2d = drawingView.DVLines2d;
// Get the 1st drawing view 2D line.
dvLine2d = dvLines2d.Item(1);
// Get a reference to the Dimensions collection.
dimensions = (SolidEdgeFrameworkSupport.Dimensions)sheet.Dimensions;
// Add a dimension to the line.
dimension = dimensions.AddLength(dvLine2d.Reference);
// Few changes to make the dimensions look right.
dimension.ProjectionLineDirection = true;
dimension.TrackDistance = 0.02;
// Get a reference to the dimension style.
// DimStyle has a ton of options...
dimStyle = dimension.Style;
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgeDraft.DraftDocument draftDocument = null;
SolidEdgeDraft.ModelLinks modelLinks = null;
SolidEdgeDraft.ModelLink modelLink = null;
SolidEdgeDraft.Sheet sheet = null;
SolidEdgeDraft.DrawingViews drawingViews = null;
SolidEdgeDraft.DrawingView drawingView = null;
SolidEdgeDraft.DVLines2d dvLines2d = null;
SolidEdgeDraft.DVLine2d dvLine2d = null;
SolidEdgeFrameworkSupport.Dimensions dimensions = null;
SolidEdgeFrameworkSupport.Dimension dimension = null;
SolidEdgeFrameworkSupport.DimStyle dimStyle = null;
string filename = null;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Get a reference to the documents collection.
documents = application.Documents;
// Create a new draft document.
draftDocument = documents.AddDraftDocument();
// Get a reference to the ModelLinks collection.
modelLinks = draftDocument.ModelLinks;
// Build path to part file.
filename = System.IO.Path.Combine(SolidEdgeCommunity.SolidEdgeUtils.GetTrainingFolderPath(), "2holebar.par");
// Add a new model link.
modelLink = modelLinks.Add(filename);
// Get a reference to the active sheet.
sheet = draftDocument.ActiveSheet;
// Get a reference to the DrawingViews collection.
drawingViews = sheet.DrawingViews;
// Add a new part drawing view.
drawingView = drawingViews.AddPartView(
From: modelLink,
Orientation: SolidEdgeDraft.ViewOrientationConstants.igDimetricTopBackLeftView,
Scale: 5.0,
x: 0.4,
y: 0.4,
ViewType: SolidEdgeDraft.PartDrawingViewTypeConstants.sePartDesignedView);
// Get a reference to the DVLines2d collection.
dvLines2d = drawingView.DVLines2d;
// Get the 1st drawing view 2D line.
dvLine2d = dvLines2d.Item(1);
// Get a reference to the Dimensions collection.
dimensions = (SolidEdgeFrameworkSupport.Dimensions)sheet.Dimensions;
// Add a dimension to the line.
dimension = dimensions.AddLength(dvLine2d.Reference);
// Few changes to make the dimensions look right.
dimension.ProjectionLineDirection = true;
dimension.TrackDistance = 0.02;
// Get a reference to the dimension style.
// DimStyle has a ton of options...
dimStyle = dimension.Style;
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}