//Does not get called...
private static void DataReceivedHandler(object sender,
SerialDataReceivedEventArgs e)
{
print("DataRecieved Handler called");
/*
SerialPort spL = (SerialPort)sender;
byte[] buf = new byte[spL.BytesToRead];
//Console.WriteLine("DATA RECEIVED!");
print("DATA RECEIVED!");
spL.Read(buf, 0, buf.Length);
foreach (Byte b in buf)
{
//Console.Write(b.ToString());
print("Input recieved:" + b.ToString() + "\n");
}
//Console.WriteLine();
*/
try
{
//string indata = sp.ReadExisting();
string indata = sp.ReadLine();
print("Input recieved:" + indata + "\n");
}
catch (Exception ex) { print(ex.Message.ToString()); }
}
private static void DataReceivedHandler(
object sender,
SerialDataReceivedEventArgs e)
{
SerialPort sp = (SerialPort)sender;
string indata = sp.ReadExisting();
Debug.Log(indata);
Debug.Log("test");
//freqvalue = System.Convert.ToSingle(indata);
}
private static void port_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
// Show all the incoming data in the port's buffer
string line = port.ReadLine();
string[] fields = line.Split(',');
if (fields.Length == 9)
{
AHRS.Update(deg2rad(float.Parse(fields[0])), deg2rad(float.Parse(fields[1])), deg2rad(float.Parse(fields[2])),
deg2rad(float.Parse(fields[3])), deg2rad(float.Parse(fields[4])), deg2rad(float.Parse(fields[5])));
}
form_3DcuboidA.RotationMatrix = ConvertToRotationMatrix(AHRS.Quaternion);
}
void comm_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
int n = comm.BytesToRead; //先记录下来，避免某种原因，人为的原因，操作几次之间时间长，缓存不一致
byte[] buf = new byte[n]; //
byte[] arrSendMsg = new byte[n + 1];
string str_tmp;
received_count += n; //增加接收计数
comm.Read(buf, 0, n); //读取缓冲数据
Buffer.BlockCopy(buf, 0, arrSendMsg, 1, n);
builder.Clear(); //清除字符串构造器的内容
//因为要访问ui资源，所以需要使用invoke方式同步ui。
this.Invoke((EventHandler)(delegate
{
//判断是否是显示为16禁止
//依次的拼接出16进制字符串
foreach (byte b in buf)
{
builder.Append(b.ToString("X2") + " ");
}
//追加的形式添加到文本框末端，并滚动到最后。
//this.txGet.AppendText(builder.ToString());
str_tmp = builder.ToString();
label4.BackColor = System.Drawing.Color.Gray;
label5.BackColor = System.Drawing.Color.Gray;
label6.BackColor = System.Drawing.Color.Gray;
label7.BackColor = System.Drawing.Color.Gray;
label8.BackColor = System.Drawing.Color.Gray;
label9.BackColor = System.Drawing.Color.Gray;
label10.BackColor = System.Drawing.Color.Gray;
label11.BackColor = System.Drawing.Color.Gray;
if (str_tmp == "FE ")
{
label4.BackColor = System.Drawing.Color.Red;
}
else if (str_tmp == "FD ")
{
label5.BackColor = System.Drawing.Color.Red;
}
else if (str_tmp == "FB ")
{
label6.BackColor = System.Drawing.Color.Red;
}
else if (str_tmp == "F7 ")
{
label7.BackColor = System.Drawing.Color.Red;
}
else if (str_tmp == "EF ")
{
label8.BackColor = System.Drawing.Color.Red;
}
else if (str_tmp == "DF ")
{
label9.BackColor = System.Drawing.Color.Red;
}
else if (str_tmp == "BF ")
{
label10.BackColor = System.Drawing.Color.Red;
}
else if (str_tmp == "7F ")
{
label11.BackColor = System.Drawing.Color.Red;
}
//修改接收计数
// labelGetCount.Text = "Get:" + received_count.ToString();
}));
//string strMsg = "服务器" + "\r\n" + " -->" + builder.ToString() + "\r\n";
//string strMsg =builder.ToString();
//byte[] arrMsg = System.Text.Encoding.UTF8.GetBytes(strMsg); // 将要发送的字符串转换成Utf-8字节数组；
arrSendMsg[0] = 0; // 表示发送的是消息数据
string strKey = "";
strKey = str_clnt;
if (send_data == 1)
{
if (string.IsNullOrEmpty(strKey)) // 判断是不是选择了发送的对象；
{
MessageBox.Show("请选择你要发送的好友！！！");
}
else
{
dict[strKey].Send(arrSendMsg);// 解决了 sokConnection是局部变量，不能再本函数中引用的问题；
}
}
}
private void ComDataRec(object sender, SerialDataReceivedEventArgs e) // заносим сообщение в глобальную переменную Comreply
{
SerialPort sp = (SerialPort)sender;
ComReply += sp.ReadExisting();
}
private void _serial_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
_response += _serial.ReadExisting();
}
/// <summary>
/// 接收到串口数据的时候触发
/// </summary>
/// <param name="sender">串口对象</param>
/// <param name="e">消息</param>
private void SerialPort_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
int rCount = 0;
byte[] buffer = new byte[1024];
byte[] receive = null;
while (true)
{
System.Threading.Thread.Sleep(20); // 此处做个微小的延时，等待数据接收完成
int count = serialPort.Read(buffer, rCount, serialPort.BytesToRead);
rCount += count;
if (count == 0)
{
break;
}
receive = new byte[rCount];
Array.Copy(buffer, 0, receive, 0, count);
}
if (receive == null)
{
return;
}
if (receive.Length < 3)
{
LogNet?.WriteError(ToString( ), $"Uknown Data：" + SoftBasic.ByteToHexString(receive, ' '));
return;
}
if (Serial.SoftCRC16.CheckCRC16(receive))
{
byte[] modbusCore = SoftBasic.BytesArrayRemoveLast(receive, 2);
if (!CheckModbusMessageLegal(modbusCore))
{
// 指令长度验证错误，关闭网络连接
LogNet?.WriteError(ToString( ), $"Receive Nosense Modbus-rtu : " + SoftBasic.ByteToHexString(receive, ' '));
return;
}
// 验证站号是否一致
if (station >= 0 && station != modbusCore[0])
{
LogNet?.WriteError(ToString( ), $"Station not match Modbus-rtu : " + SoftBasic.ByteToHexString(receive, ' '));
return;
}
// LogNet?.WriteError( ToString( ), $"Success：" + BasicFramework.SoftBasic.ByteToHexString( receive, ' ' ) );
// 需要回发消息
byte[] copy = ModbusInfo.PackCommandToRtu(ReadFromModbusCore(modbusCore));
serialPort.Write(copy, 0, copy.Length);
if (IsStarted)
{
RaiseDataReceived(receive);
}
}
else
{
LogNet?.WriteWarn("CRC Check Failed : " + SoftBasic.ByteToHexString(receive, ' '));
}
}
void sport_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
SerialPort thisPort = (sender as SerialPort);
byte[] buf = new byte[thisPort.BytesToRead];
thisPort.Read(buf, 0, buf.Length);
string strData = string.Empty;
foreach (Byte b in buf)
{
BitacoraModel.addItem ("Leer puerto",string.Format ("Puerto {0}", thisPort.PortName),string.Format ("Dato recibido [ {0} ] ",b));
strData += ((char) b).ToString();
}
BitacoraModel.addItem ("Cadena recibida",string.Format ("Puerto {0}", thisPort.PortName),string.Format ("Cadena [ {0} ] ",strData));
/*
* CODIGO DE ENVÍO AUTOMATICO DE PULSACIONES A OTRO PUERTO DE MANERA AUTOMÁTICA
*/
this.senDataToPort ("COM1", //NOMBRE DEL PUERTO
"p"); //DATO A ENVIAR
}
/// <summary>
/// Com Port Data Received event
/// </summary>
/// <param name="sender">object sender</param>
/// <param name="e">event Args</param>
private void ComPortDataReceived(object sender, SerialDataReceivedEventArgs e)
{
lock ("Flag")
{
StringBuilder result = new StringBuilder();
while (this.comPort.BytesToRead > 0)
{
System.Threading.Thread.Sleep(100);
try
{
byte[] bufferData = new byte[this.comPort.BytesToRead];
this.comPort.Read(bufferData, 0, bufferData.Length);
result.Append(System.Text.Encoding.UTF8.GetString(bufferData));
}
catch (TimeoutException timeoutEx)
{
// 以下這邊請自行撰寫你想要的例外處理
this.UpdateTXMessage("[Debug] Timeout");
this.UpdateTXMessage("[Debug]" + timeoutEx.ToString());
}
catch (Exception ex)
{
this.UpdateTXMessage("[Debug]" + ex.ToString());
Debug.WriteLine(ex.ToString());
}
}
string context = result.ToString();
this.UpdateRXMessage(this.PortName + " [RX] " + context);
if (context.Contains("meter_"))
{
int intStart = 0, intEnd = 0;
string strNewResponse = string.Empty;
intStart = context.IndexOf("meter");
strNewResponse = context.Substring(intStart, context.Length - intStart);
intEnd = strNewResponse.IndexOf("\r");
strNewResponse = strNewResponse.Substring(0, intEnd);
string[] strTmp = strNewResponse.Split('_');
string ackString = "dbu_" + strTmp[1] + Environment.NewLine;
this.SendData(ackString);
}
else
{
byte[] byteArray = System.Text.Encoding.UTF8.GetBytes(context);
}
}
}
private void Puerto_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
string line = puerto.ReadLine();
this.BeginInvoke(new LineaRecibidaEvent(onLineaRecibida), line);
}
private void serialPort2_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
richTextBox1.Text += "Serial:ID2: " + serialPort2.ReadLine();
}
private void SerialPort_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
string data = serialPort.ReadLine();
OnScanCoded?.Invoke(data);
}
private void Serial_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
RxString = Serial.ReadExisting();
/*chama outra thread para escrever o dado em alguma posição do Formulário*/
this.Invoke(new EventHandler(trataDadoRecebido));
}
void port_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
// Show all the incoming data in the port's buffer
MessageBox.Show(port.ReadExisting());
}
public override void portDataReceived(object sender, SerialDataReceivedEventArgs e)
{
throw new NotImplementedException();
}
}//用于测试串口功能的字节转换函数，在具体业务中不使用
private static void M8128DataReceivedHandler(object sender, SerialDataReceivedEventArgs e)
{
TorqeIsUpdate = false;
M8128RevData = new byte[29];
SerialPort sp = (SerialPort)sender;
if (sp.BytesToRead <= 0)
{
return;
}
_ = M8128RevData;
lock (M8128Lock)
{
bool FirstIsOk = false;
bool HeadIsOK = false;
int RevNum = 0;
for (; RevNum < 29;)
{
byte RevData;
if (!sp.IsOpen)
{
return;
}
RevData = Convert.ToByte(sp.ReadByte());
if (HeadIsOK)
{
M8128RevData[RevNum] = RevData;
RevNum++;
}
if (!FirstIsOk && RevData == 0xAA)
{
FirstIsOk = true;
}
if (FirstIsOk && RevData == 0x55 && !HeadIsOK)
{
HeadIsOK = true;
}
}
}
_ = M8128RevData;
if (M8128RevData == null)
{
Console.WriteLine(ByteArrayToHexString(M8128RevData));
return;
}
FTSensor.forceX = BitConverter.ToSingle(M8128RevData, 4);
FTSensor.torqueX = BitConverter.ToSingle(M8128RevData, 16); //实际力矩
FTSensor.forceY = BitConverter.ToSingle(M8128RevData, 8); //实际力
FTSensor.torqueY = BitConverter.ToSingle(M8128RevData, 20); //实际力矩
FTSensor.forceZ = BitConverter.ToSingle(M8128RevData, 12); //实际力
FTSensor.torqueZ = BitConverter.ToSingle(M8128RevData, 24); //实际力矩
TorqeIsUpdate = true;
Console.WriteLine("Fx=" + FTSensor.forceX + "Tx=" + FTSensor.torqueX
+ "Fy=" + FTSensor.forceY + "Ty=" + FTSensor.torqueY
+ "Fz=" + FTSensor.forceZ + "Tz=" + FTSensor.torqueZ
);
}//采集卡串口接收线程
void port_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
if (timeSet == false)
{
startTime = DateTime.Now;
timeSet = true;
}
if (portActive == false)
{
if (port != null)
{
port.DiscardInBuffer();
}
return;
}
while (port.BytesToRead > 0)
{
int length = port.BytesToRead;
if (length > 50)
{
length = 50;
}
byte[] bytes = new byte[length];
length = port.Read(bytes, 0, length);
foreach (var b in bytes)
{
var v = b;
switch (v)
{
case SOF_EVENT:
frameTimeStamp = new DateTime(DateTime.Now.Ticks - startTime.Ticks);
frameType = FrameType.Event;
break;
case SOF_MESSAGE:
frameTimeStamp = new DateTime(DateTime.Now.Ticks - startTime.Ticks);
frameType = FrameType.Message;
break;
case SOF_STATE:
frameTimeStamp = DateTime.Now;
frameType = FrameType.State;
break;
case ESC:
escReceived = true;
break;
case EOF:
try
{
switch (frameType)
{
case FrameType.Event:
eventFrameQueue.Enqueue(new EventFrame(frameTimeStamp, frameData.ToArray()));
Interlocked.Increment(ref framesReceived);
break;
case FrameType.Message:
msgFrameQueue.Enqueue(new MessageFrame(frameTimeStamp, frameData.ToArray()));
Interlocked.Increment(ref framesReceived);
break;
case FrameType.State:
break;
}
}
catch
{
Console.WriteLine("!");
}
frameData.Clear();
break;
default:
if (escReceived)
{
escReceived = false;
v |= 0x80;
}
frameData.Add(v);
break;
}
}
Interlocked.Add(ref bytesReceived, length);
}
}
/// <summary>
/// Callback for data received
/// </summary>
void OnDataReceived(object sender, SerialDataReceivedEventArgs args)
{
//count++;
while (COM.BytesToRead > 0)
{
//read byte from port
byte ByteRead = (byte)COM.ReadByte();
//add onto list
message.Add(ByteRead);
//remove first byte if message exceed size limit
if (message.Count > PackageMaxSizeLimit)
{
message.RemoveAt(0);
}
//find package end
int loc = -1;
if (PackageMode == PackageModes.UseFPGA)
{
// if first byte is start of header
if (message[0] == (byte)0x01)
{
// find eof
loc = message.IndexOf(0x04);
// if eof detected
if (loc > 0)
{
//fetch package
if (message.Count == 9)
{
byte[] package = new byte[loc + 1];
try
{
int messageLength = loc + 1;
for (int i = 0; i < messageLength; i++)
{
package[i] = message[i];
}
//take off read package
message.RemoveRange(0, messageLength);
//do action of package received
if (PackageReceived != null)
{
PackageReceived(package);
}
count++;
}
catch (IndexOutOfRangeException) { }
}
else if (loc != -1)
{
message.Clear();
}
}
}
else
{
message.Clear();
}
}
// else if not using FPGA
else
{
if (PackageMode == PackageModes.UseEscapeToken)
{
//if eof detected
loc = message.IndexOfSeq <byte>(EscapeToken);
}
else if (PackageMode == PackageModes.UseFunction)
{
//if eof detected
loc = FindPackageEnd(message.ToArray());
}
//notify package if found
if (loc > -1)
{
//fetch package
byte[] package = new byte[loc];
try
{
for (int i = 0; i < loc; i++)
{
package[i] = message[i];
}
//take off read package
message.RemoveRange(0, loc + EscapeToken.Length);
//do action of package received
if (PackageReceived != null)
{
PackageReceived(package);
}
count++;
}
catch (IndexOutOfRangeException) { }
}
}
}
}
private void Port_ReceivedEvent(object sender, SerialDataReceivedEventArgs e)
{
while (Port.BytesToRead > 0)
{
if (processCOM ())
{
switch (id)
{
case HSPid:
HPacket = (HandShakePacket)ByteArrayToStructure (buffer, HPacket);
Invoke ("HandShake", 0);
if ((HPacket.M1 == 3) && (HPacket.M2 == 1) && (HPacket.M3 == 4))
{
DisplayFound = true;
}
else
{
DisplayFound = false;
}
break;
case Cid:
VesselControls ();
//Invoke("VesselControls", 0);
break;
default:
Invoke ("Unimplemented", 0);
break;
}
}
}
}
void port_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
this.RefreshInfoTextBox();
}
void ReceiveDataHandler(object sender, SerialDataReceivedEventArgs e)
{
SerialPort port = (SerialPort) sender;
string indata = port.ReadExisting();
Debug.Log("Data Received : " + indata);
}
// 串口接收数据
private void serialPort1_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
try
{
int encoderPulse = 0x00000000, otrEncoderPulse = 0x00000000;
ushort bytChk = 0x00, bytTailByte = 0x00;;
int dataSize = 0, errorNum = 0;
int n = serialPort1.BytesToRead;
byte[] dataBuff = new byte[n];
byte[] cmdata = new byte[3]; //接收数据命令段缓存
serialPort1.Read(dataBuff, 0, dataBuff.Length); //获取串口数据
buffer.AddRange(dataBuff); //将读取的数据放入buffer中
serialPort1.DiscardInBuffer(); //清空串口数据
printLog(sendData); //打印串口数据
dataSize = buffer.Count;
while (buffer.Count >= 4) //当buffer中的数据的个数大于等于4个时，即每一帧的数据长度所在位（第4位）出现时
{
if (buffer[0] == 0x55 && buffer[1] == 0xAA)
{
int len = buffer[3]; //长度位
if (len > 0 && len <= 250)
{
if (dataSize >= (len + 6)) //如果接收到的数据没有达到一帧数据的指定长度， 则执行下次循环
{
int num = 0; //数据帧为：55 AA 01 0D 50 0B 00 01 86 A0 00 01 86 AA 05 02 01 XOR F0
bytChk = Get_CheckXor(dataBuff, dataBuff.Length); //计算校验位
bytTailByte = buffer[dataSize - 1]; //结束位
if (bytChk == buffer[dataSize - 2] && bytTailByte == 0xF0) //检查校验位和尾帧数据是否正确
{
int dataLen = buffer[5];
buffer.RemoveRange(0, 6); //删去帧头，地址和帧长度，命令字
while (dataLen > 0) //读取命令段
{
//encoderPulse = buffer[0];
//encoderPulse <<= 8;
//encoderPulse += buffer[1];
//encoderPulse <<= 8;
//encoderPulse += buffer[2];
//encoderPulse <<= 8;
//encoderPulse += buffer[3];
for (int i = 0; i < 4; i++)
{
encoderPulse += buffer[i]; // 00 01 86 A0 00 01 86 AA
if (i == 3)
{
break;
}
encoderPulse <<= 8;
}
encoderPulse = (int)(encoderPulse & 0xFFFFFFFF); // 第一个编码器脉冲数
for (int j = 4; j < 8; j++)
{
otrEncoderPulse += buffer[j]; // 00 01 86 A0 00 01 86 AA
if (j == 7)
{
break;
}
otrEncoderPulse <<= 8;
}
otrEncoderPulse = (int)(otrEncoderPulse & 0xFFFFFFFF); // 第二个编码器脉冲数
buffer.RemoveRange(0, 8); // 删除存储过的命令段
for (int k = 0; k < 3; k++)
{
cmdata[k] = buffer[k]; // cmdata[0]:电机转动速度；cmdata[1]:电机转动时间；cmdata[2]:所有数据回传结束标志
}
dataLen = 0;
dataSize = 0;
buffer.Clear();
int firEncoder = Convert.ToInt32(encoderPulse);
int secEncoder = Convert.ToInt32(otrEncoderPulse);
int dValue = Math.Abs(firEncoder - secEncoder);
tbspeed.Text = cmdata[0].ToString();
// time = DateTime.Now.ToLocalTime().ToString("yyyy年MM月dd日HH:mm:ss");
time = DateTime.Now.ToLocalTime().ToString("yyyy年MM月dd日HH时mm分ss秒");
fileName = System.Environment.CurrentDirectory + "\\" + time + ".txt"; //"+ time + "
if (cmdata[2] > 0) //回传数据结束cmdata[1]= 01
{
string outputStr = time + " 电机在转速为：" + cmdata[0] + "转每分钟下，工作时间了：" + cmdata[1] + "分钟,第一个编码器输出脉冲数为：" +
Convert.ToString(firEncoder) + "个，第二个编码器输出脉冲数为：" +
Convert.ToString(secEncoder) + "个,两编码器输出脉冲数差为：" +
Convert.ToString(dValue) + "；\r\n";
rtbDspMsg.Text += outputStr;
StringBuilder fileData = new StringBuilder();
fileData.Append(outputStr);
saveFileToTxt(fileData.ToString(), fileName);
fileData.Clear();
}
else
{
//所有数据没回传完毕处理
string outputStr = time + "当前电机转速为：" + cmdata[0] + "转每分钟，第一个编码器输出脉冲数为：" +
Convert.ToString(firEncoder) + "个,第二个编码器输出脉冲数为：" +
Convert.ToString(secEncoder) + "个,两编码器输出脉冲数差为：" +
Convert.ToString(dValue) + "；\r\n";
rtbDspMsg.Text += outputStr;
}
}
}
else
{
rtbDspMsg.Text += "校验位验证失败！\n";
buffer.Clear();
errorNum++; //错误数据个数
}
}
else
{
break;
}
}
else
{
buffer.RemoveRange(0, 2);
}
}
else
{
buffer.RemoveRange(0, 1);
}
}
}
catch (Exception ex)
{
MessageBox.Show(ex.Message, "出错提示");
}
}
public void process_DoWorkHandler(object sender, SerialDataReceivedEventArgs e)
{
// checksum test if package is transfered successfull
// Function is still not robust enough
Thread.Sleep(20); //sleep for 100ms to be sure all data from PFC is received
SerialPort serialPort = (SerialPort)sender;
pfc_response[0] = (byte)serialPort.ReadByte(); //First byte returns first byte of request, e.g. 0xF0 for advanced data
pfc_response[1] = (byte)serialPort.ReadByte(); //Second byte indicates remaining size from data package, w/o first byte!!
pfc_SizeOfPackage = pfc_response[1] -1; // Second byte is already red, so remainingbytes minus 1
for (int i = 0; pfc_SizeOfPackage <= i; i++) //loop trough array to get all data from serialInBuffer
{
pfc_response[i + 2] = (byte)serialPort.ReadByte();
}
//calculate Checksum from pfc_package: 0xFF minus each byte = last byte in array, if not -> discard
pfc_checkSum = 0xFF;
for (int i = 0; pfc_SizeOfPackage <= i; i++)
{
pfc_checkSum = pfc_checkSum - pfc_response[i];
}
if (pfc_checkSum == pfc_response[pfc_SizeOfPackage + 1]) //check the checksum
{
parse_serialData(pfc_response); //call parser
}
}
private void post_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
Thread.Sleep(50); //延时
/*
* if (!radioButton1.Checked)
* {
* string str = serialPort1.ReadExisting();//字符串方式读
* textBox_receive.AppendText(str);
*
* }
* else
* {
*
* byte data;
* data = (byte)serialPort1.ReadByte();
* string str = Convert.ToString(data, 16).ToUpper();//
* textBox_receive.AppendText("0x" + (str.Length == 1 ? "0" + str : str) + " ");
*
* Byte[] receivedData = new Byte[serialPort1.BytesToRead]; //创建接收字节数组
* serialPort1.Read(receivedData, 0, receivedData.Length); //读取数据
* textBox_receive.AppendText(receivedData.ToString());
* }*/
try //尝试协议接收数据
{
Byte[] receivedData = new Byte[serialPort1.BytesToRead]; //创建接收字节数组
serialPort1.Read(receivedData, 0, receivedData.Length); //读取数据
//循环遍历接收到的数组
for (int i = 0; i < receivedData.Length - 4; i++)
{
if (receivedData[i] == Header_data)
{ //数据协议 帧头
if ((receivedData[i + 1] + receivedData[i + 2] + receivedData[i + 3]) == receivedData[i + 4])
{ //和校验
if (receivedData[i + 1] >= Flag_VoltageData[0] && receivedData[i + 1] <= Flag_VoltageData[1])
{ //电压数据显示
Voltage_Battery[receivedData[i + 1] - Flag_VoltageData[0]].Text = (receivedData[i + 2] * 16 + receivedData[i + 3]).ToString() + "mv"; //.ToString("X2");
i = i + 4;
// textBox_receive.AppendText(i.ToString());//测试用语句
}
else if (receivedData[i + 1] >= Flag_SOCData[0] && receivedData[i + 1] <= Flag_SOCData[1])
{//SOC数据显示
Soc_Battery[receivedData[i + 1] - Flag_SOCData[0]].Text = (receivedData[i + 2] * 16 + receivedData[i + 3]).ToString() + "ma";
i = i + 4;
// textBox_receive.AppendText(i.ToString());//测试用语句
}
else if (receivedData[i + 1] >= Flag_SOHData[0] && receivedData[i + 1] <= Flag_SOHData[1])
{//SOH数据显示
Soh_Battery[receivedData[i + 1] - Flag_SOHData[0]].Text = (receivedData[i + 2] * 16 + receivedData[i + 3]).ToString() + "mv";
i = i + 4;
// textBox_receive.AppendText(i.ToString());//测试用语句
}
else if (receivedData[i + 1] >= Flag_TemperatureData[0] && receivedData[i + 1] <= Flag_TemperatureData[1])
{//Temperature数据显示
Temperature_Battery[receivedData[i + 1] - Flag_TemperatureData[0]].Text = (receivedData[i + 2] * 16 + receivedData[i + 3]).ToString() + "mv";
i = i + 4;
// textBox_receive.AppendText(i.ToString());//测试用语句
}
//总电池显示显示
else if (receivedData[i + 1] == Flag_Sum[0])
{//充电状态
if (receivedData[i + 2] == 0x01)
{
Statu_Battery.Text = "静置状态";
i = i + 4;
}
else if (receivedData[i + 2] == 0x02)
{
Statu_Battery.Text = "放电状态";
i = i + 4;
}
else if (receivedData[i + 2] == 0x04)
{
Statu_Battery.Text = "充电状态";
i = i + 4;
}
}
else if (receivedData[i + 1] == Flag_Sum[1])
{//总电压显示
Voltage_Sum.Text = (receivedData[i + 2] * 16 + receivedData[i + 3]).ToString() + "mv";
i = i + 4;
}
else if (receivedData[i + 1] == Flag_Sum[2])
{//总电流显示
Current_Sum.Text = (receivedData[i + 2] * 16 + receivedData[i + 3]).ToString() + "mv";
i = i + 4;
}
else if (receivedData[i + 1] == Flag_Sum[3])
{//总SOC显示
SOC_Sum.Text = (receivedData[i + 2] * 16 + receivedData[i + 3]).ToString() + "mv";
i = i + 4;
}
}
}
else
{
// textBox1.AppendText(receivedData[i].ToString("X2") + " ");
// strRcv += receivedData[i].ToString("X2") + " ";
}
}
Length_Data = Length_Data + receivedData.Length;//记录数据量
Counter.Text = Length_Data.ToString();
// int count = strRcv.Length / 48; // 记录数据的个数
// for (int j = 0; j < count; j++)
{
/// 获取每条记录
// string buf1 = strRcv.Substring(j * 48, 48);
/// 添加字符串数据到数据库
// DataList.Add(buf1);
}
}
catch (System.Exception ex)
{
MessageBox.Show(ex.Message, "出错提示");
// textBox1.Text = "";
}
}
private void serialPort1_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
SetText(serialPort1.ReadLine());
}
public void DataReceived(object sender, SerialDataReceivedEventArgs e)
{
if (!Port.IsOpen)
{
return;
}
_TempString += Port.ReadExisting();
if (_TempString.Contains("\r\n"))
{
#if DEBUG
Console.WriteLine(_TempString);
#endif
string commandResponse = _TempString.Substring(0, _TempString.IndexOf("\r\n") + 2);
_TempString = _TempString.Replace(commandResponse, "");
//========== ismeterconnected request (returns software version) ==========
if (commandResponse.StartsWith("?"))
{
if (commandResponse.Split(new char [] { '.' }).Length == 3)
{
_MeterResponded = true;
}
}
if (commandResponse.StartsWith("S "))
{
_MeterResponded = true;
}
//========== serial number response ==========
if (commandResponse.StartsWith("@"))
{
_MeterResponded = true;
SerialNumber = commandResponse.Split(new char[] { ' ' })[1].Replace('\"', ' ').Trim();
#if DEBUG
Console.WriteLine("SerialNumber: " + SerialNumber);
#endif
}//if
//========== patient record response ==========
else if (commandResponse.StartsWith("P"))
{
if (!_HeaderRead)
{
//first row of P records is the header
_HeaderRead = true;
_RecordCount = 0;
string[] header = commandResponse.Split(new char[] { ',' });
SampleCount = int.Parse(header[0].Split(new char[] { ' ' })[1]);
SerialNumber = header[1].Replace("\"", "");
SampleFormat = header[2].Substring(header[2].IndexOf('\"') + 1, header[2].LastIndexOf('\"') - (header[2].IndexOf('\"') + 1)).ToLower().Trim() == "mg/dl" ? SampleFormat.MGDL : SampleFormat.MMOL;
#if DEBUG
Console.WriteLine("SampleCount: " + SampleCount);
Console.WriteLine("SampleFormat: " + SampleFormat.ToString());
Console.WriteLine("SerialNumber: " + SerialNumber);
#endif
OnHeaderRead(new HeaderReadEventArgs(SampleCount, this));
}//if
else
{
//all other P records are glucose records
Console.WriteLine("Record: " + commandResponse);
string[] parsedMsg = commandResponse.Replace("\"", "").Replace(" ", "").Split(new char[] { ',' });
string[] parsedDate = parsedMsg[1].Split(new char[] { '/' });
string[] parsedTime = parsedMsg[2].Split(new char[] { ':' });
try
{
DateTime dtTimeStamp = new DateTime(int.Parse(parsedDate[2].ToString()), int.Parse(parsedDate[0].ToString()), int.Parse(parsedDate[1].ToString()), int.Parse(parsedTime[0].ToString()), int.Parse(parsedTime[1].ToString()), int.Parse(parsedTime[2].ToString()));
if (dtTimeStamp.Year < 100)
{
//two digit year encountered (all dates are assumed to be in 2000+)
dtTimeStamp = dtTimeStamp.AddYears(2000);
}//if
OnRecordRead(new RecordReadEventArgs(Records.AddRecordRow(dtTimeStamp, Int32.Parse(parsedMsg[3].ToString()), "mg/dl")));//always returns data in mg/dl
}//try
catch { }
finally
{
++_RecordCount;
}
if (_RecordCount == SampleCount)
{
//all records read so close the port and dispose
OnReadFinished(new ReadFinishedEventArgs(this));
Dispose();
} //if
}
} //elseif
} //if
}
void m_Port_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
lock (this)
{
byte[] buff = new byte[m_Port.BytesToRead];
int length = m_Port.Read(buff, 0, buff.Length);
System.Diagnostics.Debug.Print("DataReceived {0} bytes , State {1}", length, m_State);
System.Diagnostics.Debug.Print("Hex : " + GetHexString(buff));
if (length == 0)
{
return;
}
switch (m_State)
{
case CommuState.Idle:
if (length == 1)
{
System.Diagnostics.Debug.Print("RecvControlChar := " + (HandshakeCodes)buff[0]);
if ((HandshakeCodes)buff[0] == HandshakeCodes.ENQ)
{
m_State = CommuState.Receiving;
SendHandshakeCode(HandshakeCodes.EOT);
//3. NO MESSAGE AFTER EOT
Start_T1_Timer();
}
}
break;
case CommuState.Receiving:
Stop_T2_Timer();
OnDataArrival(buff, length);
break;
case CommuState.Send_Request:
System.Diagnostics.Debug.Print("RecvControlChar := " + (HandshakeCodes)buff[0]);
if ((HandshakeCodes)buff[0] == HandshakeCodes.EOT)
{
Stop_T2_Timer();
m_State = CommuState.Sending;
StartSend();
}
break;
case CommuState.Sending:
System.Diagnostics.Debug.Print("RecvControlChar := " + (HandshakeCodes)buff[0]);
if ((HandshakeCodes)buff[0] == HandshakeCodes.ACK)
{
Stop_T2_Timer();
m_State = CommuState.Idle;
}
else if ((HandshakeCodes)buff[0] == HandshakeCodes.NAK)
{
Stop_T2_Timer();
m_State = CommuState.Idle; //message failed
}
break;
}
}
if (m_State == CommuState.Idle && m_QueueSendingBlock.Count > 0)
{
RequestToSend();
}
}
private void DataReceivedCallback(object sender, SerialDataReceivedEventArgs e)
{
_dataDisplayer.Show("Received: " + serialPort.ReadLine());
}
private void SerialPort1_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
data = serialPort1.ReadLine();
this.Invoke(new EventHandler(displayData_event));
}
void read(object sender, SerialDataReceivedEventArgs ev)
{
int n = comm.BytesToRead;
if (0 != n)
{
byte[] buf = new byte[n];
try
{
comm.Read(buf, 0, n);
}
catch (Exception e)
{
Report(e.ToString());
}
if (null != mReader)
{
mReader(this, buf, n);
}
}
}
private void RS232_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
SerialPort sp = (SerialPort)sender;
while (boolRead)
{
try
{
string tempStr = "";
//побайтовое чтение того, что порт посылает
if (!sp.IsOpen)
{
return;
}
byte newByte = (byte)sp.BaseStream.ReadByte();
tempBytesList.Add(newByte);
byte[] tempBytes = tempBytesList.ToArray();
tempStr = Encoding.ASCII.GetString(tempBytes);
tempBytesList.Clear();
// Encoding.ASCII.GetChars()
sBuffer.Add(newByte);
if (sBuffer.Count > 0)
{
//преобразование их в массив
if (tempStr == "\n")
{
byte[] recivedByte = sBuffer.ToArray();
string recivedStr = Encoding.ASCII.GetString(recivedByte);
processLineFromComPort(recivedStr);
this.sBuffer.Clear();
}
// FullMessageRecived(recivedStr);
}
}
//если кончилось время ожидания..
catch (Exception exp)
{
Console.WriteLine(exp.Message);
}
}
// this.spPort.Close();
//this.Invoke(new EventHandler(displayText));
// string s = RS232.ReadLine();
//s = convertAsciiTextToHex(s); //вызов функция конвертации
// if (s.Length >= 31 * 2 + 30 )
// {
//try
//{
// mRxCounter += (ulong)sp.Read(inputBuffer, 0, inputBuffer.Length);
// Array.Clear(inputBuffer, 0, inputBuffer.Length);
//}
//catch (System.TimeoutException)
//{
// MessageBox.Show("Time out Failure");
//}
//catch (System.ArgumentException)
//{
// MessageBox.Show("Argument Exception");
//}
//catch (System.Exception)
//{
// MessageBox.Show("Exception");
//}
//byte[] buffer = new byte[blockLimit];
//Action kickoffRead = null;
//kickoffRead = delegate
//{
// sp.BaseStream.BeginRead(buffer, 0, buffer.Length, delegate(IAsyncResult ar)
// {
// try
// {
// int actualLength = port.BaseStream.EndRead(ar);
// byte[] received = new byte[actualLength];
// Buffer.BlockCopy(buffer, 0, received, 0, actualLength);
// raiseAppSerialDataEvent(received);
// }
// catch (IOException exc)
// {
// handleAppSerialError(exc);
// }
// kickoffRead();
// }, null);
//};
//kickoffRead();
//sp.Write(GET_TIME, 0, GET_TIME.Length);
//Thread.Sleep(500);//Даем больше времени на ожидание данных
//string readex = newPort.ReadExisting();//Убираем эту строку и заменяем на
// int byteRecieved = sp.BytesToRead;
//byte[] messByte = new byte[sp.BytesToRead];
//sp.Read(messByte, 0, sp.BytesToRead);
//Console.WriteLine(BitConverter.ToString(messByte));
//foreach (Byte b in messByte)
//{
// // Console.Write(b.ToString() + @" ");
//}
//bytesHashtable.Add(DateTime.UtcNow.Ticks, messByte);
// processData(messByte);
// }
}
public static void Serial_Received(object sender, SerialDataReceivedEventArgs e)
{
// Show all the incoming data in the port's buffer
string serial_catcher;
serial_catcher = Serial_Pi.ReadExisting();
if (serial_catcher.StartsWith("\x00" + "\x00" ))
{
Console.WriteLine("Header Found (0x00 0x00 0x11 0x00)!");
}
Console.WriteLine("RX: "+serial_catcher);
}
private void serialPort1_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
var receivedData = GetDataFromSerialPort(serialPort1);
EnrichTextbox(receivedData);
}
private void DataReceivedHandler(object sender, SerialDataReceivedEventArgs e)
{
//SerialPort portSerie = (SerialPort)sender;
//string donneeArduino = portSerie.ReadLine();
}
void sport_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
SerialPort thisPort = (sender as SerialPort);
byte[] buf = new byte[thisPort.BytesToRead];
thisPort.Read(buf, 0, buf.Length);
string strData = string.Empty;
foreach (Byte b in buf)
{
BitacoraModel.addItem ("Leer puerto",string.Format ("Puerto {0}", thisPort.PortName),string.Format ("Dato recibido [ {0} ] ",b));
strData += ((char) b).ToString();
}
BitacoraModel.addItem ("Cadena recibida",string.Format ("Puerto {0}", thisPort.PortName),string.Format ("Cadena [ {0} ] ",strData));
}
private void Port1_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
}
// When serial port receives data
private void SerialPortOBD_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
datareceivedOBD = true; //changes data received to true
}
void SerialOnReceivedHandler(object sender, SerialDataReceivedEventArgs e)
{
evtSerialOnRx.Set();
}
void HandleGcodeWriterPortDataReceived(object sender, SerialDataReceivedEventArgs e)
{
}
private void SerialPort_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
buffer_rx += SerialPort.ReadExisting();
if (iniciar == 's' && buffer_rx == "k")
{
iniciar = 'n';
timer_ControlDeTiempos.Enabled = false;
this.Invoke(new EventHandler(Inicializar));
buffer_rx = "";
}
else if (iniciar == 'n' && buffer_rx == "k")
{
buffer_rx = "";
}
else if (iniciar == 'n')
{
decimales = 'n';
num_dec = 0;
incompleto = 'n';
while (buffer_rx.Length > 0 && incompleto == 'n')
{
orden1.sector = sectores.Total;
orden1.tiempo = "";
orden1.record = 'n';
if (buffer_rx[0] == 'T')
{
orden1.record = 's';
}
else if (buffer_rx[0] == 'P')
{
orden1.sector = sectores.Primero;
orden1.record = 's';
}
else if (buffer_rx[0] == 'p')
{
orden1.sector = sectores.Primero;
}
else if (buffer_rx[0] == 'S')
{
orden1.sector = sectores.Segundo;
orden1.record = 's';
}
else if (buffer_rx[0] == 's')
{
orden1.sector = sectores.Segundo;
}
for (aux = 1; aux < buffer_rx.Length; aux++)
{
if (buffer_rx[aux] != 'f')
{
orden1.tiempo += buffer_rx[aux];
if (buffer_rx[aux] == '.')
{
decimales = 's';
}
else if (decimales == 's')
{
num_dec++;
}
}
else if (buffer_rx[aux] == 'f')
{
string buffer_aux = "";
aux++;
for (; aux < buffer_rx.Length; aux++)
{
buffer_aux += buffer_rx[aux];
}
buffer_rx = buffer_aux;
break;
}
}
if (aux == buffer_rx.Length)
{
if (buffer_rx[aux - 1] != 'f')
{
incompleto = 's';
}
}
if (incompleto == 'n')
{
if (decimales == 'n')
{
orden1.tiempo += ".00";
}
else
{
for (; num_dec < 2; num_dec++)
{
orden1.tiempo += '0';
}
}
if (orden1.sector == sectores.Primero)
{
this.Invoke(new EventHandler(Agregar_tiempo));
if (rb_Sectores1.Checked == true)
{
t = Math.Round(System.Convert.ToDouble(orden1.tiempo), 2) / 100;
if (orden1.tiempo[3] == '0')
{
t = t / 10;
if (orden1.tiempo[2] == '0')
{
t = t / 10;
}
}
v = Math.Round(d / t, 2);
v_string = v.ToString("0.00");
this.Invoke(new EventHandler(Agregar_velocidad));
if (orden1.record == 's')
{
this.Invoke(new EventHandler(Agregar_Vmax));
}
}
if (orden1.record == 's')
{
this.Invoke(new EventHandler(Agregar_mejor_tiempo));
Console.Beep();
}
Console.Beep();
}
else if (orden1.sector == sectores.Segundo)
{
this.Invoke(new EventHandler(Agregar_tiempo));
if (rb_Sectores2.Checked == true)
{
t = Math.Round(System.Convert.ToDouble(orden1.tiempo), 2) / 100;
if (orden1.tiempo[3] == '0')
{
t = t / 10;
if (orden1.tiempo[2] == '0')
{
t = t / 10;
}
}
v = Math.Round(d / t, 2);
v_string = v.ToString("0.00");
this.Invoke(new EventHandler(Agregar_velocidad));
if (orden1.record == 's')
{
this.Invoke(new EventHandler(Agregar_Vmax));
}
}
if (orden1.record == 's')
{
this.Invoke(new EventHandler(Agregar_mejor_tiempo));
Console.Beep();
}
Console.Beep();
}
else
{
this.Invoke(new EventHandler(Agregar_tiempo));
if (rb_Sectores0.Checked == true)
{
t = Math.Round(System.Convert.ToDouble(orden1.tiempo), 2) / 100;
v = Math.Round(d / t, 2);
v_string = v.ToString("0.00");
this.Invoke(new EventHandler(Agregar_velocidad));
if (orden1.record == 's')
{
this.Invoke(new EventHandler(Agregar_Vmax));
}
}
if (orden1.record == 's')
{
this.Invoke(new EventHandler(Agregar_mejor_tiempo));
if (bt_Sectores.Text == "Activar tiempo por sectores")
{
Console.Beep();
}
}
if (bt_Sectores.Text == "Activar tiempo por sectores")
{
Console.Beep();
}
}
}
}
}
}
//データ受信
void serialPort_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
//受信データを読み取り
string rData = serialPort.ReadLine();
string[] rDataArray = rData.Split(separator);
if (rDataArray.Length == 7)
{
//Q:の返値の時
Stat = (string[])rDataArray.Clone();
setStat();
}
logSet(rData);
}
/// <summary>
/// Method that process received data
/// </summary>
/// <param name="sender"></param>
/// <param name="e"></param>
void comSerialPort_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
throw new NotImplementedException();
}
/**
* Method name: serialPort_DataReceived
* Method description: method that activates when
* the data is received through
* the serial port
* Input params: object sender - the object
* that raised the event
* SerialDataReceivedEventArgs e
* - contains info about the
* event
* Output params: n/a
*/
private void serialPort_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
this.Invoke(new EventHandler(treatNewData));
}
private void DataReceivedHandlerUmidade(object sender, SerialDataReceivedEventArgs e)
{
string indata = ConexaoSerial.Instancia.GetConexao().ReadLine().ToString();
SetUmidade(indata);
}
public static void Serial_Received(object sender, SerialDataReceivedEventArgs e)
{
int buffer_length=Serial_Pi.BytesToRead;
byte[] serial_catcher;
serial_catcher=new byte[buffer_length];
Serial_Pi.Read(serial_catcher, 0, Serial_Pi.BytesToRead);
Console.WriteLine("RX: ");
foreach (ushort value in serial_catcher)
{
Console.Write("{0}(0x{1:X})\t",(char)value,value);
}
Console.WriteLine();
//Init/ID
if (compare_arr(serial_catcher, new byte[] { 0x00, 0x00, 0x00, 0x00, 0xC1, 0x00, 0x00, 0x00, 0xC1 }))
{
Console.WriteLine("Sending ID");
Serial_Write_Bytes(new byte[] { 0x00, 0x00, 0x11, 0x00, 0xC1, 0xF3, 0x00, 0x00, 0xC5 });
}
//Firmware
if (compare_arr(serial_catcher, new byte[] { 0x11, 0x00, 0x00, 0x00, 0xB4, 0x00, 0x00, 0x00, 0xC5 }))
{
Console.WriteLine("Sending FW");
Serial_Write_Bytes(new byte[] { 0x00, 0x00, 0x11, 0x00, 0xB4, 0xF3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE3, 0x00, 0x09, 0x09, 0x34, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xDA });
}
//Data
if (compare_arr(serial_catcher, new byte[] { 0x11, 0x00, 0x00, 0x00, 0xB6, 0x00, 0x00, 0x00, 0xC7 }))
{
Random random_voltage = new Random();
byte voltage = Convert.ToByte(random_voltage.Next(210, 240));
Random random_power = new Random();
byte power = Convert.ToByte(random_power.Next(0, 100));
byte running_1 = (byte)(running_minutes & 0xff);
byte running_2 = (byte)((running_minutes >> 8) & 0xff);
byte running_3 = (byte)((running_minutes >> 16) & 0xff);
byte running_4 = (byte)(running_minutes >> 24);
Console.WriteLine("Sending Data");
byte[] Data_Bytes=new byte[] { 0x00, 0x00, 0x11, 0x00, 0xB6, 0xF3, 0x00, 0x00, 0x04, 0x03, 0x35, 0x00, 0x8A, 0x13, 0xE8, 0x00, 0x00, 0x00, 0x24, 0x00, 0x90, 0x0B, 0x00, 0x1F, running_1, running_2, running_3, running_4, 0x00, 0x00};
Serial_Write_Bytes_and_Checksum(Data_Bytes);
}
//Max Power
if (compare_arr(serial_catcher, new byte[] { 0x11, 0x00, 0x00, 0x00, 0xB9, 0x00, 0x00, 0x00, 0xCA }))
{
Console.WriteLine("Sending Max PWR");
Serial_Write_Bytes(new byte[] { 0x00, 0x00, 0x11, 0x00, 0xB9, 0xF3, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x1B, 0x00, 0x21, 0x00, 0x22, 0x00, 0x00, 0x00, 0xE5, 0x02, 0x7E, 0x48, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E });
}
//Reset Max Power
if (compare_arr(serial_catcher, new byte[] { 0x11, 0x00, 0x00, 0x00, 0x97, 0x01, 0x00, 0x00, 0xA9 }))
{
Console.WriteLine("Reset Max PWR");
Serial_Write_Bytes(new byte[] { 0x00, 0x00, 0x11, 0x00, 0x97, 0x01, 0x00, 0x00, 0xA9 });
}
int old_debug = debug;
debug = 1;
if (debug > 1) { Console.WriteLine("RX: " + serial_catcher); }
debug = old_debug;
}
private void DataReceivedHandler(object sender, SerialDataReceivedEventArgs e)
{
string indata = ConexaoSerial.Instancia.GetConexao().ReadExisting();
SetTexts(indata);
}
private void port_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
// Show all the incoming data in the port's buffer
Debug.Log("received:" + serialPort.ReadExisting());
}
void ThePort_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
//ReadTo_ByString();
}
