public void ConnectDevice()
{
if (String.IsNullOrEmpty(DevicePort))
{
throw new Exception("The 'DevicePort' property has not been set.");
}
if (DeviceBaudRate == 0)
{
throw new Exception("The 'DeviceBaudRate' property has not been set.");
}
Console.WriteLine("Enabling target hardware device...");
DeviceClient = new SerialClient(DevicePort, DeviceBaudRate);
try {
DeviceClient.Open();
} catch (IOException ex) {
HandleConnectionIOException("target", DevicePort, DeviceBaudRate, ex);
}
DeviceIsEnabled = true;
Console.WriteLine("");
}
public void SignRequestSerial(SignRequest request)
{
if (string.IsNullOrWhiteSpace(Const.Locator.ParameterSetting.SelectedPort))
{
throw new Exception("Port can not be null.");
}
if (string.IsNullOrWhiteSpace(Const.Locator.ParameterSetting.SelectedDataBits))
{
throw new Exception("DataBits can not be null.");
}
if (string.IsNullOrWhiteSpace(Const.Locator.ParameterSetting.SelectedBaudRate))
{
throw new Exception("BaudRate can not be null.");
}
if (string.IsNullOrWhiteSpace(Const.Locator.ParameterSetting.SelectedParity))
{
throw new Exception("Parity can not be null.");
}
if (string.IsNullOrWhiteSpace(Const.Locator.ParameterSetting.SelectedStopBits))
{
throw new Exception("StopBits can not be null.");
}
string requestString = JsonConvert.SerializeObject(request);
SerialClient _client = new SerialClient(Const.Locator.ParameterSetting.SelectedPort,
int.Parse(Const.Locator.ParameterSetting.SelectedBaudRate),
(Parity)Enum.Parse(typeof(Parity), Const.Locator.ParameterSetting.SelectedParity),
int.Parse(Const.Locator.ParameterSetting.SelectedDataBits),
(StopBits)Enum.Parse(typeof(StopBits), Const.Locator.ParameterSetting.SelectedStopBits));
_client.Open();
_client.Complated -= _signTcpClient_Complated;
_client.Complated += _signTcpClient_Complated;
_client.Send(0x02, requestString);
}
public void Run_Then_Response_N_Rounds()
{
IClient cli = new SerialClient(COM.Port101);
IComm serialComm = new WrappedComm(cli);
string sets = @"CmdType,Sent
response,[12 34 56]
response,[34 56 78]";
serialComm.Setup(sets);
serialComm.Open();
Task.Run(() => serialComm.Run());
IClient client = new SerialClient(COM.Port102);
client.Open();
client.Send(Conv.StrHexToBytes("12 34"));
byte[] rev0 = client.Rev();
client.Send(Conv.StrHexToBytes("45 67"));
byte[] rev1 = client.Rev();
client.Send(Conv.StrHexToBytes("78 90"));
client.ReadTimeOut = 10;
byte[] rev2 = client.Rev();
client.Close();
serialComm.Stop();
serialComm.Close();
Assert.AreEqual("12 34 56", Conv.BytesToStrHex(rev0));
Assert.AreEqual("34 56 78", Conv.BytesToStrHex(rev1));
Assert.AreEqual(0, rev2.Length);
}
public virtual void Open()
{
try {
Client.Open();
} catch (IOException ex) {
Console.WriteLine("Failed to connect to the device at port: " + Client.Port.PortName);
Console.WriteLine(ex.ToString());
}
}
public void EnsurePortIsOpen()
{
if (!Client.Port.IsOpen)
{
Client.Open();
Thread.Sleep(1000);
Client.ReadLine();
}
}
public void Connect()
{
Client.Open();
IsConnected = true;
// Read the first line (the title) to clear the buffer
Client.ReadLine();
}
public void Rev_out_of_time()
{
IClient cli = new SerialClient(COM.Port101);
cli.Open();
cli.ReadTimeOut = 10;
byte[] rev = cli.Rev();
cli.Close();
Assert.AreEqual(0, rev.Length);
}
public string Send(string port, string value)
{
var serialPort = new SerialPort(port, 9600);
var client = new SerialClient(serialPort);
client.Open();
Thread.Sleep(2000);
client.WriteLine(value);
Thread.Sleep(2000);
var response = client.Read();
client.Close();
return(response);
}
public DeviceInfo ReadDeviceInfoFromSerial(string port)
{
Console.WriteLine("Reading device info from serial port...");
var serialPort = new SerialPort(port, 9600);
var client = new SerialClient(serialPort);
if (!client.Port.IsOpen)
{
try
{
client.Open();
}
catch (Exception ex)
{
return(null);
}
Console.WriteLine("Opened serial port");
Thread.Sleep(2000);
}
var builder = new StringBuilder();
Console.WriteLine("----- Start Output -----");
while (client.Port.BytesToRead > 0 && builder.ToString().IndexOf(Extractor.EndDeviceInfoText) == -1)
{
var output = builder.ToString();
var line = client.ReadLine().Trim();
Console.WriteLine(line);
builder.AppendLine(line);
}
Console.WriteLine("----- End Output -----");
var deviceInfo = Extractor.ExtractInfo(port, builder.ToString());
return(deviceInfo);
}
public static void StatueRequestSerial(string request)
{
if (string.IsNullOrWhiteSpace(Const.Locator.ParameterSetting.SelectedPort))
{
throw new Exception("Port can not be null.");
}
if (string.IsNullOrWhiteSpace(Const.Locator.ParameterSetting.SelectedDataBits))
{
throw new Exception("DataBits can not be null.");
}
if (string.IsNullOrWhiteSpace(Const.Locator.ParameterSetting.SelectedBaudRate))
{
throw new Exception("BaudRate can not be null.");
}
if (string.IsNullOrWhiteSpace(Const.Locator.ParameterSetting.SelectedParity))
{
throw new Exception("Parity can not be null.");
}
if (string.IsNullOrWhiteSpace(Const.Locator.ParameterSetting.SelectedStopBits))
{
throw new Exception("StopBits can not be null.");
}
if (string.IsNullOrWhiteSpace(request))
{
throw new Exception("Request can not be null.");
}
StopBits ss = (StopBits)Enum.Parse(typeof(StopBits), Const.Locator.ParameterSetting.SelectedStopBits);
SerialClient _client = new SerialClient(Const.Locator.ParameterSetting.SelectedPort,
int.Parse(Const.Locator.ParameterSetting.SelectedBaudRate),
(Parity)Enum.Parse(typeof(Parity), Const.Locator.ParameterSetting.SelectedParity),
int.Parse(Const.Locator.ParameterSetting.SelectedDataBits),
(StopBits)Enum.Parse(typeof(StopBits), Const.Locator.ParameterSetting.SelectedStopBits));
_client.Open();
_client.Complated += _statusTcpClient_Complated;
_client.Send(0x01, request);
}
public void InitByPort()
{
IClient cli = new SerialClient(COM.Port101);
IComm serialComm = new WrappedComm(cli);
string sets = @"CmdType,Sent
response,[34 56 78]";
serialComm.Setup(sets);
serialComm.Open();
Task.Run(() => serialComm.Run());
IClient client = new SerialClient(COM.Port102);
client.Open();
client.Send(Conv.StrHexToBytes("12 34"));
byte[] rev0 = client.Rev();
client.Close();
serialComm.Stop();
serialComm.Close();
Assert.AreEqual("34 56 78", Conv.BytesToStrHex(rev0));
}
public void Connect()
{
Client.Open();
IsConnected = true;
}
private void Send()
{
switch (Const.Locator.ParameterSetting.CommModel)
{
case Commom.CommModel.NetPort: //网口通讯
if (string.IsNullOrWhiteSpace(Cmd))
{
throw new Exception("Request cmd can not be null.");
}
if (string.IsNullOrWhiteSpace(Request))
{
throw new Exception("Request can not be null.");
}
_netClient = new TcpHelper();
if (string.IsNullOrWhiteSpace(Const.Locator.ParameterSetting.SdcUrl))
{
MessageBoxEx.Show("EFD URL can not be null.", MessageBoxButton.OK);
return;
}
string[] sdc = Const.Locator.ParameterSetting.SdcUrl.Split(':');
if (sdc != null && sdc.Count() != 2)
{
MessageBoxEx.Show("EFD URL is not in the right format.", MessageBoxButton.OK);
return;
}
bool isConn = _netClient.Connect(IPAddress.Parse(sdc[0]), int.Parse(sdc[1]));
if (!isConn)
{
MessageBoxEx.Show("Failed to connect to EFD.", MessageBoxButton.OK);
return;
}
_netClient.Complated -= _client_Complated;
_netClient.Complated += _client_Complated;
switch (Cmd)
{
case "Status":
_netClient.Send(0x01, Request);
break;
case "Sign":
_netClient.Send(0x02, Request);
break;
case "Report":
_netClient.Send(0x04, Request);
break;
default:
break;
}
_netClient.ReciveAsync();
break;
case Commom.CommModel.SerialPort: //串口通讯
if (string.IsNullOrWhiteSpace(Const.Locator.ParameterSetting.SelectedPort))
{
throw new Exception("Port can not be null.");
}
if (string.IsNullOrWhiteSpace(Const.Locator.ParameterSetting.SelectedDataBits))
{
throw new Exception("DataBits can not be null.");
}
if (string.IsNullOrWhiteSpace(Const.Locator.ParameterSetting.SelectedBaudRate))
{
throw new Exception("BaudRate can not be null.");
}
if (string.IsNullOrWhiteSpace(Const.Locator.ParameterSetting.SelectedParity))
{
throw new Exception("Parity can not be null.");
}
if (string.IsNullOrWhiteSpace(Const.Locator.ParameterSetting.SelectedStopBits))
{
throw new Exception("StopBits can not be null.");
}
if (string.IsNullOrWhiteSpace(Cmd))
{
throw new Exception("Request cmd can not be null.");
}
if (string.IsNullOrWhiteSpace(Request))
{
throw new Exception("Request can not be null.");
}
_client = new SerialClient(Const.Locator.ParameterSetting.SelectedPort,
int.Parse(Const.Locator.ParameterSetting.SelectedBaudRate),
(Parity)Enum.Parse(typeof(Parity), Const.Locator.ParameterSetting.SelectedParity),
int.Parse(Const.Locator.ParameterSetting.SelectedDataBits),
(StopBits)Enum.Parse(typeof(StopBits), Const.Locator.ParameterSetting.SelectedStopBits));
_client.Open();
_isCanSend = false;
_client.Complated += _client_Complated;
switch (Cmd)
{
case "Status":
_client.Send(0x01, Request);
break;
case "Sign":
_client.Send(0x02, Request);
break;
case "Report":
_client.Send(0x04, Request);
break;
default:
break;
}
break;
default:
break;
}
}
public static void Main(string[] args)
{
var arguments = new Arguments(args);
IsVerbose = arguments.Contains("v");
var userId = GetConfigValue(arguments, "UserId");
var pass = GetConfigValue(arguments, "Password");
var host = GetConfigValue(arguments, "Host");
var deviceName = GetConfigValue(arguments, "DeviceName");
var serialPortName = GetConfigValue(arguments, "SerialPort");
var serialBaudRate = Convert.ToInt32(GetConfigValue(arguments, "SerialBaudRate"));
var topicPrefix = "/" + userId;
var useTopicPrefix = Convert.ToBoolean(ConfigurationSettings.AppSettings["UseTopicPrefix"]);
SerialPort port = null;
if (String.IsNullOrEmpty(serialPortName))
{
Console.WriteLine("Serial port not specified. Detecting.");
var detector = new SerialPortDetector();
port = detector.Detect();
serialPortName = port.PortName;
}
else
{
Console.WriteLine("Serial port specified");
port = new SerialPort(serialPortName, serialBaudRate);
}
Console.WriteLine("Device name: " + GetConfigValue(arguments, "DeviceName"));
Console.WriteLine("Port name: " + serialPortName);
var deviceTopic = "/" + deviceName;
if (useTopicPrefix)
{
deviceTopic = topicPrefix + deviceTopic;
}
Console.WriteLine(deviceTopic + "/[Key]");
if (port == null)
{
Console.WriteLine("Error: Device port not found.");
}
else
{
Console.WriteLine("Serial port: " + port.PortName);
Client = new SerialClient(port);
try {
Client.Open();
Console.WriteLine(Client.Read());
var isRunning = true;
var mqttClient = new MqttClient(host);
var clientId = Guid.NewGuid().ToString();
mqttClient.MqttMsgPublishReceived += client_MqttMsgPublishReceived;
mqttClient.Connect(clientId, userId, pass);
var subscribeTopics = GetSubscribeTopics(arguments);
foreach (var topic in subscribeTopics)
{
mqttClient.Subscribe(new string[] { topic }, new byte[] { MqttMsgBase.QOS_LEVEL_EXACTLY_ONCE });
}
while (isRunning)
{
var output = "";
/*while (!output.Contains(";;"))
* {
* // Thread.Sleep(1);
* output += Client.Read ();
* }*/
//Console.WriteLine("----- Serial output");
//Console.WriteLine(output);
//Console.WriteLine("-----");
var topics = new List <string>();
//Publish (arguments, mqttClient, output, topics);
//Thread.Sleep(10);
}
Client.Close();
} catch (IOException ex) {
Console.WriteLine("Error: Please ensure device is connected to port '" + serialPortName + "' and not already in use.\n\n" + ex.Message);
}
}
}
