private void FSMTCheckReelQty_Load(object sender, System.EventArgs e)
{
smtFacade = new SMTFacade(this.DataProvider);
tableSource = new DataTable();
tableSource.Columns.Add("MOCode");
tableSource.Columns.Add("StepSequenceCode");
tableSource.Columns.Add("ReelNo");
tableSource.Columns.Add("MaterialCode");
tableSource.Columns.Add("ReelLeftQty", typeof(int));
tableSource.Columns.Add("ActualQty", typeof(int));
tableSource.Columns.Add("IsChecked");
gridList.DataSource = tableSource;
gridList.DisplayLayout.Bands[0].Columns["ReelLeftQty"].Format = "#,#";
gridList.DisplayLayout.Bands[0].Columns["ReelLeftQty"].CellAppearance.TextHAlign = Infragistics.Win.HAlign.Right;
gridList.DisplayLayout.Bands[0].Columns["ActualQty"].Format = "#,#";
gridList.DisplayLayout.Bands[0].Columns["ActualQty"].CellAppearance.TextHAlign = Infragistics.Win.HAlign.Right;
gridList.DisplayLayout.Bands[0].Columns["IsChecked"].Hidden = true;
UserControl.UIStyleBuilder.FormUI(this);
UserControl.UIStyleBuilder.GridUI(gridList);
//this.InitPageLanguage();
//this.InitGridLanguage(gridList);
}
private void FSMTFeederReelWatch_Load(object sender, System.EventArgs e)
{
smtFacade = new SMTFacade(this.DataProvider);
tableSource = new DataTable();
tableSource.Columns.AddRange(new DataColumn[] {
new DataColumn("LineCode"),
new DataColumn("MachineCode"),
new DataColumn("MachineStationCode"),
new DataColumn("FeederCode"),
new DataColumn("FeederLeftCount", typeof(int)),
new DataColumn("FeederAlterDay", typeof(int)),
new DataColumn("ReelNo"),
new DataColumn("ReelLeftQty", typeof(int)),
new DataColumn("IsAlert"),
new DataColumn("NextReelNo"),
new DataColumn("NextReelLeftQty", typeof(int)),
new DataColumn("MoCode")
});
tableSource.DefaultView.Sort = "LineCode,MachineCode,MachineStationCode";
this.gridList.DataSource = tableSource.DefaultView;
this.gridList.DisplayLayout.Bands[0].Columns["IsAlert"].Hidden = true;
this.gridList.DisplayLayout.Bands[0].Columns["MoCode"].Hidden = true;
//this.gridList.DisplayLayout.Bands[0].Columns["NextReelNo"].Hidden = true;
tableLineError = new DataTable();
tableLineError.Columns.AddRange(new DataColumn[] {
new DataColumn("LineCode"),
new DataColumn("MOCode"),
new DataColumn("ErrorType"),
new DataColumn("MachineCode"),
new DataColumn("MachineStationCode"),
new DataColumn("ReelNo"),
new DataColumn("ReelLeftQty", typeof(int))
});
tableLineError.DefaultView.Sort = "LineCode,MOCode,MachineCode,MachineStationCode";
this.gridLineError.DataSource = tableLineError.DefaultView;
UserControl.UIStyleBuilder.FormUI(this);
UserControl.UIStyleBuilder.GridUI(gridList);
UserControl.UIStyleBuilder.GridUI(gridLineError);
gridList.DisplayLayout.Bands[0].Columns["FeederLeftCount"].Format = "#,#";
gridList.DisplayLayout.Bands[0].Columns["FeederLeftCount"].CellAppearance.TextHAlign = Infragistics.Win.HAlign.Right;
gridList.DisplayLayout.Bands[0].Columns["FeederAlterDay"].Format = "#,#";
gridList.DisplayLayout.Bands[0].Columns["FeederAlterDay"].CellAppearance.TextHAlign = Infragistics.Win.HAlign.Right;
gridList.DisplayLayout.Bands[0].Columns["ReelLeftQty"].Format = "#,#";
gridList.DisplayLayout.Bands[0].Columns["ReelLeftQty"].CellAppearance.TextHAlign = Infragistics.Win.HAlign.Right;
gridList.DisplayLayout.Bands[0].Columns["NextReelLeftQty"].Format = "#,#";
gridList.DisplayLayout.Bands[0].Columns["NextReelLeftQty"].CellAppearance.TextHAlign = Infragistics.Win.HAlign.Right;
gridLineError.DisplayLayout.Bands[0].Columns["ReelLeftQty"].Format = "#,#";
gridLineError.DisplayLayout.Bands[0].Columns["ReelLeftQty"].CellAppearance.TextHAlign = Infragistics.Win.HAlign.Right;
this.lblLineStatus.Text = string.Empty;
this.txtLineCode.Value = Service.ApplicationService.Current().LoginInfo.Resource.StepSequenceCode;
this.btnRefresh_Click(null, null);
Current = this;
}
private void FFeederMaintain_Load(object sender, System.EventArgs e)
{
if (tableSource == null)
{
tableSource = new DataTable();
tableSource.Columns.Add("FeederCode");
tableSource.Columns.Add("MaxCount", typeof(int));
tableSource.Columns.Add("UsedCount", typeof(int));
tableSource.Columns.Add("OldStatus");
tableSource.Columns.Add("MaintainType");
tableSource.Columns.Add("ReturnReason");
tableSource.Columns.Add("AnalyseReason");
tableSource.Columns.Add("OperationMessage");
tableSource.Columns.Add("Status");
tableSource.Columns.Add("MaintainUser");
tableSource.Columns.Add("MaintainDate");
tableSource.Columns.Add("MaintainTime");
}
gridList.DataSource = tableSource;
gridList.DisplayLayout.Bands[0].Columns["UsedCount"].Hidden = true;
SetControlEnabled();
this.txtFeederNo.TextFocus(false, true);
smtFacade = new SMTFacade(this.DataProvider);
UserControl.UIStyleBuilder.FormUI(this);
UserControl.UIStyleBuilder.GridUI(gridList);
gridList.DisplayLayout.Bands[0].Columns["MaxCount"].Format = "#,#";
gridList.DisplayLayout.Bands[0].Columns["MaxCount"].CellAppearance.TextHAlign = Infragistics.Win.HAlign.Right;
gridList.DisplayLayout.Bands[0].Columns["UsedCount"].Format = "#,#";
gridList.DisplayLayout.Bands[0].Columns["UsedCount"].CellAppearance.TextHAlign = Infragistics.Win.HAlign.Right;
BenQGuru.eMES.BaseSetting.SystemSettingFacade sysFacade = new BenQGuru.eMES.BaseSetting.SystemSettingFacade(this.DataProvider);
analyseReasonList = sysFacade.GetParametersByParameterGroup("FEEDERANALYSEREASON");
if (analyseReasonList != null)
{
for (int i = 0; i < analyseReasonList.Length; i++)
{
BenQGuru.eMES.Domain.BaseSetting.Parameter parameter = (BenQGuru.eMES.Domain.BaseSetting.Parameter)analyseReasonList[i];
this.cboAnalyseReason.Items.Add(parameter.ParameterAlias);
}
}
operationMessageList = sysFacade.GetParametersByParameterGroup("FEEDERSOLUTION");
if (operationMessageList != null)
{
for (int i = 0; i < operationMessageList.Length; i++)
{
BenQGuru.eMES.Domain.BaseSetting.Parameter parameter = (BenQGuru.eMES.Domain.BaseSetting.Parameter)operationMessageList[i];
this.cboOperationMessage.Items.Add(parameter.ParameterAlias);
}
}
//this.InitPageLanguage();
//this.InitGridLanguage(gridList);
}
private void btnQuery_Click(object sender, System.EventArgs e)
{
string status = string.Empty;
if (smtfacade == null)
{
smtfacade = new SMTFacade(this.DataProvider);
}
if (mofacade == null)
{
mofacade = new MOFacade(this.DataProvider);
}
if (collectfacade == null)
{
collectfacade = new DataCollectFacade(this.DataProvider);
}
object[] objs = smtfacade.Querysmtrelation(this.txtMoCodeQuery.Value.Trim().ToUpper(),
this.txtPartNumber.Value.Trim().ToUpper(),
this.txtRCardQuery.Value.Trim().ToUpper(),
FormatHelper.TODateInt(this.startDate.Value),
FormatHelper.TODateInt(this.endDate.Value));
tableSource.Rows.Clear();
this.ucBtnNew.Enabled = true;
this.ucBtnSave.Enabled = false;
this.txtMoCodeEdit.Value = string.Empty;
this.txtRelationQtyEdit.Value = string.Empty;
this.txtRCardEdit.Value = string.Empty;
this.txtMoCodeEdit.Enabled = true;
this.txtRelationQtyEdit.Enabled = true;
this.txtRCardEdit.Enabled = true;
this.txtMoCodeEdit.TextFocus(false, true);
if (objs != null)
{
string strStatusClose = ProductionStatus.ProductionStatus_CloseProduction.ToString().Trim();
string strStatusin = ProductionStatus.ProductionStatus_InProduction.ToString().Trim();
string strStatusNo = ProductionStatus.ProductionStatus_NoProduction.ToString().Trim();
for (int i = 0; i < objs.Length; i++)
{
Smtrelationqty smt = (Smtrelationqty)objs[i];
DataRow row = tableSource.NewRow();
object simrepObj = collectfacade.GetSimulationReport(smt.Mocode.Trim().ToUpper(), smt.Rcard.Trim().ToUpper());
if (simrepObj != null)
{
if (((SimulationReport)simrepObj).IsComplete.Trim() == "1")
{
status = MutiLanguages.ParserString(strStatusClose);
}
else
{
status = MutiLanguages.ParserString(strStatusin);
}
}
else
{
status = MutiLanguages.ParserString(strStatusNo);
}
row["PartNumber"] = smt.Itemcode.ToString();
row["MOCode"] = smt.Mocode;
row["Rcard"] = smt.Rcard;
row["RelationQty"] = smt.Relationqtry;
row["Status"] = status;
row["MDate"] = FormatHelper.ToDateTime(smt.Mdate, smt.Mtime);
row["Edit"] = "";
tableSource.Rows.Add(row);
}
}
else
{
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Normal, "$CS_No_Data_To_Display"));
return;
}
}
private void txtRelationQtyEdit__TxtboxKeyPress(object sender, KeyPressEventArgs e)
{
if (e.KeyChar == '\r')
{
#region facade
if (mofacade == null)
{
mofacade = new MOFacade(this.DataProvider);
}
if (materialFacade == null)
{
materialFacade = new MaterialFacade(this.DataProvider);
}
if (collectfacade == null)
{
collectfacade = new DataCollectFacade(this.DataProvider);
}
if (morcardfacade == null)
{
morcardfacade = new MORunningCardFacade(this.DataProvider);
}
if (smtfacade == null)
{
smtfacade = new SMTFacade(this.DataProvider);
}
if (itemfacade == null)
{
itemfacade = new ItemFacade(this.DataProvider);
}
#endregion
if (this.txtMoCodeEdit.Enabled == false && this.txtRCardEdit.Enabled == false)
{
btnSave_Click(sender, e);
return;
}
#region null
if (this.txtMoCodeEdit.Value == string.Empty)
{
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$MO_Cannot_Null"));
this.txtMoCodeEdit.TextFocus(false, true);
return;
}
if (string.IsNullOrEmpty(txtRCardEdit.Value))
{
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$RMARcard_Cannot_Null"));
this.txtRCardEdit.TextFocus(false, true);
return;
}
if (this.txtRelationQtyEdit.Value.Trim() == string.Empty)
{
//数量不能为空 $Error_Qty_Cannot_Empty
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$Error_Qty_Cannot_Empty"));
this.txtRelationQtyEdit.TextFocus(false, true);
return;
}
#endregion
try
{
#region mocode
if (materialFacade.GetMOCode(this.txtMoCodeEdit.Value) == false)
{
//该工单不存在
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$Error_Rework_MO_Not_Exist"));
this.txtMoCodeEdit.TextFocus(false, true);
return;
}
object objMO = mofacade.GetMO(this.txtMoCodeEdit.Value.Trim().ToUpper());
if (objMO == null || ((MO)objMO).MOStatus.Trim().ToUpper() == "MOSTATUS_CLOSE")
{
//该工单已关单,不能维护打X板!
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$Error_MO_Close_Not_SmtRelQty"));
this.txtMoCodeEdit.TextFocus(false, true);
return;
}
#endregion
#region rcard
object lastsimulationReport = materialFacade.GetLastSimulationReport(this.txtRCardEdit.Value.Trim().ToUpper());
if (lastsimulationReport != null)
{
if (((SimulationReport)lastsimulationReport).IsComplete.Trim() == "0")
{
// 该序列号在生产中,不允许维护打X板!
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$Error_Rcard_inProduction"));
this.txtRCardEdit.TextFocus(false, true);
return;
}
object simulationReport = collectfacade.GetSimulationReport(this.txtMoCodeEdit.Value.Trim().ToUpper(), this.txtRCardEdit.Value.Trim().ToUpper());
if (simulationReport != null)
{
// 该序列号在生产中或者已经完工,不允许维护打X板!
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$Error_Rcard_inProductionOrClose"));
this.txtRCardEdit.TextFocus(false, true);
return;
}
else
{
//修改 rcard不在工单范围内
#region
object item2sncheck = itemfacade.GetItem2SNCheck(((MO)objMO).ItemCode.Trim().ToUpper(), ItemCheckType.ItemCheckType_SERIAL);
if (item2sncheck != null)
{
string checkContent = ((Item2SNCheck)item2sncheck).SNContentCheck.Trim().ToUpper();
int checkLength = ((Item2SNCheck)item2sncheck).SNLength;
string checkPrefix = ((Item2SNCheck)item2sncheck).SNPrefix.Trim().ToUpper();
string rcardCheck = this.txtRCardEdit.Value.Trim().ToUpper();
if (!string.IsNullOrEmpty(checkPrefix))
{
if (rcardCheck.IndexOf(checkPrefix) != 0)
{
// 该序列号与工单要求的序列号前缀不一样
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$CS_RunningCardPrefix_ERROR $CS_RunningCardPrefix: " + checkPrefix));
this.txtRCardEdit.TextFocus(false, true);
return;
}
}
if (checkLength != null && checkLength > 0)
{
if (rcardCheck.Length != checkLength)
{
// 该序列号与工单要求的序列号长度不一样
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$CS_RunningCardLength_ERROR $CS_RunningCardLength: " + checkLength));
this.txtRCardEdit.TextFocus(false, true);
return;
}
}
if (checkContent != null && checkContent == "Y")
{
string pattern = @"^([A-Za-z0-9]+[ ]*)*[A-Za-z0-9]+$";
Regex rex = new Regex(pattern, RegexOptions.IgnoreCase);
Match match = rex.Match(rcardCheck);
// 序列号被限制为字符 空格 数字
if (!match.Success)
{
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$CS_SNContent_CheckWrong $CS_Param_RunSeq:" + this.txtRCardEdit.Value.Trim()));
this.txtRCardEdit.TextFocus(false, true);
return;
}
}
}
#endregion
}
}
else
{
//修改 rcard不在工单范围内
#region
object item2sncheck = itemfacade.GetItem2SNCheck(((MO)objMO).ItemCode.Trim().ToUpper(), ItemCheckType.ItemCheckType_SERIAL);
if (item2sncheck != null)
{
string checkContent = ((Item2SNCheck)item2sncheck).SNContentCheck.Trim().ToUpper();
int checkLength = ((Item2SNCheck)item2sncheck).SNLength;
string checkPrefix = ((Item2SNCheck)item2sncheck).SNPrefix.Trim().ToUpper();
string rcardCheck = this.txtRCardEdit.Value.Trim().ToUpper();
if (!string.IsNullOrEmpty(checkPrefix))
{
if (rcardCheck.IndexOf(checkPrefix) != 0)
{
// 该序列号与工单要求的序列号前缀不一样
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$CS_RunningCardPrefix_ERROR $CS_RunningCardPrefix: " + checkPrefix));
this.txtRCardEdit.TextFocus(false, true);
return;
}
}
if (checkLength != null && checkLength > 0)
{
if (rcardCheck.Length != checkLength)
{
// 该序列号与工单要求的序列号长度不一样
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$CS_RunningCardLength_ERROR $CS_RunningCardLength: " + checkLength));
this.txtRCardEdit.TextFocus(false, true);
return;
}
}
if (checkContent != null && checkContent == "Y")
{
string pattern = @"^([A-Za-z0-9]+[ ]*)*[A-Za-z0-9]+$";
Regex rex = new Regex(pattern, RegexOptions.IgnoreCase);
Match match = rex.Match(rcardCheck);
// 序列号被限制为字符 空格 数字
if (!match.Success)
{
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$CS_SNContent_CheckWrong $CS_Param_RunSeq:" + this.txtRCardEdit.Value.Trim()));
this.txtRCardEdit.TextFocus(false, true);
return;
}
}
}
#endregion
}
#endregion
#region Qty
try
{
decimal moQty = 0;
int intQty = Convert.ToInt32(this.txtRelationQtyEdit.Value);
if (intQty <= 0)
{
//数量应为整数类型 $Error_Qty_Not_Int
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$Error_CS_SmtRelQty_Should_Over_Zero"));
this.txtRelationQtyEdit.TextFocus(false, true);
return;
}
if (objMO != null && ((MO)objMO).IDMergeRule >= 0)
{
moQty = ((MO)objMO).IDMergeRule;
}
if (moQty < Convert.ToDecimal(intQty))
{
//数量应小于工单的连板数 $Error_Qty_Not_Int
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$Error_CS_SmtRelQty_Should_less_MO" + ": " + moQty));
this.txtRelationQtyEdit.TextFocus(false, true);
return;
}
}
catch
{
//数量应为整数类型 $Error_Qty_Not_Int
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$Error_Qty_Not_Int"));
this.txtRelationQtyEdit.TextFocus(false, true);
return;
}
#endregion
#region Smtrelationqty
DBDateTime dbDateTime = FormatHelper.GetNowDBDateTime(this.DataProvider);
if (smtfacade.GetSMTRelationQty(this.txtRCardEdit.Value.Trim().ToUpper(), this.txtMoCodeEdit.Value.Trim().ToUpper()) != null)
{
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$Error_CS_RCard_Exist"));
this.txtRCardEdit.TextFocus(false, true);
return;
}
Smtrelationqty smtqty = smtfacade.CreateNewSmtrelationqty();
smtqty.Rcard = this.txtRCardEdit.Value.Trim().ToUpper();
smtqty.Mocode = this.txtMoCodeEdit.Value.Trim().ToUpper();
smtqty.Itemcode = ((MO)mofacade.GetMO(smtqty.Mocode)).ItemCode;
smtqty.Relationqtry = int.Parse(this.txtRelationQtyEdit.Value);
smtqty.Muser = ApplicationService.Current().UserCode;
smtqty.Mdate = dbDateTime.DBDate;
smtqty.Mtime = dbDateTime.DBTime;
smtqty.Eattribute1 = "";
smtqty.Eattribute2 = "";
smtqty.Eattribute3 = "";
smtqty.Memo = "";
smtfacade.AddSmtrelationqty(smtqty);
#endregion
}
catch (Exception ex)
{
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, ex.Message));
return;
}
btnQuery_Click(sender, e);
}
}
private void btnSave_Click(object sender, EventArgs e)
{
if (this.txtRelationQtyEdit.Value.Trim() == string.Empty)
{
//数量不能为空 $Error_Qty_Cannot_Empty
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$Error_Qty_Cannot_Empty"));
this.txtRelationQtyEdit.TextFocus(false, true);
return;
}
try
{
if (mofacade == null)
{
mofacade = new MOFacade(this.DataProvider);
}
object objMO = mofacade.GetMO(this.txtMoCodeEdit.Value.Trim().ToUpper());
decimal moQty = 0;
int intQty = Convert.ToInt32(this.txtRelationQtyEdit.Value);
if (intQty <= 0)
{
//数量应为整数类型 $Error_Qty_Not_Int
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$Error_CS_SmtRelQty_Should_Over_Zero"));
this.txtRelationQtyEdit.TextFocus(false, true);
return;
}
else
{
if (objMO != null && ((MO)objMO).IDMergeRule >= 0)
{
moQty = ((MO)objMO).IDMergeRule;
}
if (moQty < Convert.ToDecimal(intQty))
{
//数量应小于工单的连板数 $Error_Qty_Not_Int
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$Error_CS_SmtRelQty_Should_less_MO" + ": " + moQty));
this.txtRelationQtyEdit.TextFocus(false, true);
return;
}
}
}
catch
{
//数量应为整数类型 $Error_Qty_Not_Int
ApplicationRun.GetInfoForm().Add(new UserControl.Message(MessageType.Error, "$Error_Qty_Not_Int"));
this.txtRelationQtyEdit.TextFocus(false, true);
return;
}
if (smtfacade == null)
{
smtfacade = new SMTFacade(this.DataProvider);
}
object relation = smtfacade.GetSMTRelationQty(this.txtRCardEdit.Value, this.txtMoCodeEdit.Value.Trim());
DBDateTime dbDateTime = FormatHelper.GetNowDBDateTime(this.DataProvider);
if (relation != null)
{
((Smtrelationqty)relation).Relationqtry = int.Parse(this.txtRelationQtyEdit.Value);
((Smtrelationqty)relation).Muser = ApplicationService.Current().UserCode;
((Smtrelationqty)relation).Mdate = dbDateTime.DBDate;
((Smtrelationqty)relation).Mtime = dbDateTime.DBTime;
smtfacade.UpdateSmtrelationqty((Smtrelationqty)relation);
}
this.ucBtnSave.Enabled = false;
btnQuery_Click(sender, e);
}
private void ucBtnOK_Click(object sender, System.EventArgs e)
{
if (this.ucLERunningCard.Value.Trim() == string.Empty)
{
//Laws Lu,2005/08/11,新增焦点设置
ucLERunningCard.TextFocus(true, true);
return;
}
this.ucMessage.Add(string.Format("<< {0}", this.ucLERunningCard.Value.Trim().ToUpper()));
// 输入分板前产品序列号
if (this._currSequence == 0)
{
#region 工单、序列号匹配
_runningCardList = new ArrayList();
if (this.txtMoCode.Checked)
{
if (string.IsNullOrEmpty(txtMoCode.Value.ToUpper().Trim()))
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_Please_Input_MOCode"));
this.ucLERunningCard.Value = "";
//Laws Lu,2005/08/11,新增焦点设置
txtMoCode.Focus();
return;
}
}
//Laws Lu,2005/10/19,新增 缓解性能问题
//Laws Lu,2006/12/25 修改 减少Open/Close的次数
((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)DataProvider).PersistBroker.CloseConnection();
((BenQGuru.eMES.Common.DomainDataProvider.SQLDomainDataProvider)DataProvider).PersistBroker.AutoCloseConnection = true;
//added by jessie lee, 2005/11/29
#region 判断转换前序列号是否符合条件
//长度检查
if (bCardTransLenULE.Checked)
{
if (bCardTransLenULE.Value.Trim().Length == 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_Before_Card_Transfer_Empty"));
ucLERunningCard.TextFocus(true, true);
return;
}
int len = 0;
try
{
len = int.Parse(bCardTransLenULE.Value.Trim());
}
catch
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_BeforeCardTransLen_Should_be_Integer"));
ucLERunningCard.TextFocus(true, true);
return;
}
if (len != this.ucLERunningCard.Value.Trim().Length)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_BeforeCardTransLen_Not_Correct"));
ucLERunningCard.TextFocus(true, true);
return;
}
}
//首字符串检查
if (bCardTransLetterULE.Checked)
{
if (bCardTransLetterULE.Value.Trim().Length == 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_Before_Card_Transfer_FLetter_Empty"));
ucLERunningCard.TextFocus(true, true);
return;
}
int index = ucLERunningCard.Value.Trim().IndexOf(bCardTransLetterULE.Value.Trim());
if (index != 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_Before_Card_Transfer_FLetter_NotCompare"));
ucLERunningCard.TextFocus(true, true);
return;
}
}
#endregion
#region 取得分板比例,从工单和SMT是否是打叉板得到分板比例，若不是，带出工单的分版比例
simReport = _DataCollectFacade.GetLastSimulationReport(this.ucLERunningCard.Value.Trim().ToUpper());
if (simReport == null)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_CS_ID_Not_Exist"));
this.ucLERunningCard.Value = "";
this.ucLERunningCard.TextFocus(true, true);
return;
}
else
{
if (simReport.IsComplete != "1")
{
//完工后才可以分板，故注释。
//主要应用于以下业务情况：
//序列号 s1 通过两张工单 mo1, mo2 完成。s1 经过第一张工单 mo1 完工后，需要进行分板 s1--> s1-1, s1-2，
//分板后再用 s1-1, s1-2 进行第二张工单 mo2 的归属生产。
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_ERROR_PRODUCT_NO_COMPLETE"));
ucLERunningCard.TextFocus(true, true);
return;
}
if (txtMoCode.Checked)
{
if (string.Compare(txtMoCode.Value.ToUpper().Trim(), simReport.MOCode, true) != 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$RCARD_NOT_IN_MO"));
ucLERunningCard.TextFocus(true, true);
return;
}
}
int rcardCount = _DataCollectFacade.GetSplitBoardCount(this.ucLERunningCard.Value.Trim().ToUpper());
if (rcardCount > 0)
{
//已经分板的序列号就不可以在分了
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_ERROR_PRODUCT_ALREADY_SPLITE"));
ucLERunningCard.TextFocus(true, true);
return;
}
}
SMTFacade smtFacade = new SMTFacade(this.DataProvider);
object objsmtrel = smtFacade.GetSMTRelationQty(this.ucLERunningCard.Value.Trim().ToUpper(), simReport.MOCode);
if (objsmtrel != null)
{
Smtrelationqty smtrel = (Smtrelationqty)objsmtrel;
this.txtIDMergeValue.Text = Convert.ToString(smtrel.Relationqtry);
}
else
{
MOFacade mofacade = new MOFacade(this.DataProvider);
object objMO = mofacade.GetMO(simReport.MOCode);
if (objMO != null)
{
MO mo = (MO)objMO;
this.txtIDMergeValue.Text = Convert.ToString(mo.IDMergeRule);
}
else
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_MO_Not_Exit"));
txtMoCode.Focus();
txtMoCode.SelectAll();
return;
}
}
#endregion
#region 判断分板前序列号是否存在
int mergeRule = 1;
try
{
mergeRule = System.Int32.Parse(this.txtIDMergeValue.Text.ToUpper().Trim());
}
catch
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_CS_IDMerge_Should_be_Integer"));//分板比例必须为整数
//Laws Lu,2005/08/11,新增焦点设置
ucLERunningCard.TextFocus(true, true);
return;
}
if (mergeRule <= 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_CS_IDMerge_Should_Over_Zero"));//分板比例必须大于零
ucLERunningCard.TextFocus(true, true);
return;
}
this._mergeRule = mergeRule;
#endregion
#endregion
}
else
{
//added by jessie lee, 2005/11/29
#region 判断转换后序列号是否符合条件
//长度检查
if (aCardTransLenULE.Checked)
{
if (aCardTransLenULE.Value.Trim().Length == 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_After_Card_Transfer_Empty"));
ucLERunningCard.TextFocus(true, true);
return;
}
int len = 0;
try
{
len = int.Parse(aCardTransLenULE.Value.Trim());
}
catch
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_AfterCardTransLen_Should_be_Integer"));
ucLERunningCard.TextFocus(true, true);
return;
}
if (len != this.ucLERunningCard.Value.Trim().Length)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_AfterCardTransLen_Not_Correct"));
ucLERunningCard.TextFocus(true, true);
return;
}
}
//首字符串检查
if (aCardTransLetterULE.Checked)
{
if (aCardTransLetterULE.Value.Trim().Length == 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_After_Card_Transfer_FLetter_Empty"));
ucLERunningCard.TextFocus(true, true);
return;
}
int index = ucLERunningCard.Value.Trim().IndexOf(aCardTransLetterULE.Value.Trim());
if (index != 0)
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_After_Card_Transfer_FLetter_NotCompare"));
ucLERunningCard.TextFocus(true, true);
return;
}
}
#endregion
#region 判断分板后序列号是否重复
if (this._runningCardList.Contains(this.ucLERunningCard.Value.Trim().ToUpper()))
{
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$Error_CS_Merge_ID_Exist"));//转换后产品序列号重复
this.ucLERunningCard.Value = "";
//Laws Lu,2005/08/11,新增焦点设置
ucLERunningCard.TextFocus(true, true);
return;
}
#endregion
int rcardCount = _DataCollectFacade.GetSplitBoardCount(this.ucLERunningCard.Value.Trim().ToUpper());
if (rcardCount > 0)
{
//已经分板的序列号就不可以在分了
this.ucMessage.Add(new UserControl.Message(MessageType.Error, "$CS_ERROR_PRODUCT_ALREADY_SPLITE"));
this.ucMessage.AddBoldText(string.Format(">>$CS_Please_Input_Merge_ID {0}/{1}", this._currSequence.ToString(), this._mergeRule.ToString()));//请输入转换后产品序列号
ucLERunningCard.TextFocus(true, true);
return;
}
this._runningCardList.Add(this.ucLERunningCard.Value.Trim().ToUpper());
}
if (this._currSequence < this._mergeRule)
{
this._currSequence++;
this.txtIDMergeValue.Enabled = false;
this.ucMessage.AddBoldText(string.Format(">>$CS_Please_Input_Merge_ID {0}/{1}", this._currSequence.ToString(), this._mergeRule.ToString())); //请输入转换后产品序列号
}
else if (this._currSequence == this._mergeRule) // 达到分板比例,写入数据库
{
try
{
this.DataProvider.BeginTransaction();
int tempCount = 1;
DBDateTime dbDateTime = FormatHelper.GetNowDBDateTime(this.DataProvider);
foreach (string strRcard in _runningCardList)
{
#region 将ID添加到SplitBoard
SplitBoard splitBorad = new SplitBoard();
splitBorad.Seq = tempCount;
splitBorad.Mocode = simReport.MOCode;
splitBorad.Rcard = strRcard;
splitBorad.Modelcode = simReport.ModelCode;
splitBorad.Itemcode = simReport.ItemCode;
splitBorad.Opcode = simReport.OPCode;
splitBorad.Rescode = ApplicationService.Current().ResourceCode;
splitBorad.Routecode = simReport.RouteCode;
splitBorad.Scard = simReport.SourceCard;
splitBorad.Segcode = simReport.SegmentCode;
splitBorad.Shiftcode = simReport.ShiftCode;
splitBorad.Shifttypecode = simReport.ShiftTypeCode;
splitBorad.Sscode = simReport.StepSequenceCode;
splitBorad.Tpcode = simReport.TimePeriodCode;
splitBorad.Muser = ApplicationService.Current().UserCode;
splitBorad.Mdate = dbDateTime.DBDate;
splitBorad.Mtime = dbDateTime.DBTime;
_DataCollectFacade.AddSplitBoard(splitBorad);
tempCount++;
#endregion
}
this.DataProvider.CommitTransaction();
this.ucMessage.Add(new UserControl.Message(MessageType.Success, ">>$CS_SplitID_CollectSuccess"));//产品序列号转换采集成功
//added by jessie lee, 2005/11/29,
}
catch (Exception ex)
{
this.DataProvider.RollbackTransaction();
this.ucMessage.Add(new UserControl.Message(MessageType.Error, ">>$CS_SplitID_CollectSuccess"));//产品序列号转换采集成功
}
this.initInput();
}
this.ucLERunningCard.Value = "";
//Laws Lu,2005/08/11,新增焦点设置
if (!aCardTransLetterULE.Checked)
{
ucLERunningCard.TextFocus(true, true);
}
else
{
ucLERunningCard.TextFocus(true, true);
}
}
