/// <summary>
/// Создать глушитель оси базовой плоскости
/// </summary>
/// <param name="figureParameters">Parameters of muffler</param>
/// <param name="basePlane">Base plane of muffler, by default is null</param>
/// <returns>Выдавливание глушителя или ноль, если выдавливание возвращает ошибку</returns>
private KompasExtrusion CreateMuffler(MufflerParameters figureParameters, ksEntity basePlane = null)
{
// Muffler sketch
var muffler = new KompasSketch(figureParameters.Document3DPart, figureParameters.BasePlaneAxis);
// If базовая плоскость установлена --
// -- создать эскиз глушителя на нем
// вместо оси базовой плоскости
if (basePlane != null)
{
muffler = new KompasSketch(figureParameters.Document3DPart, basePlane);
}
if (muffler.LastErrorCode != ErrorCodes.OK)
{
LastErrorCode = muffler.LastErrorCode;
return(null);
}
var mufflerSketchEdit = muffler.BeginEntityEdit();
if (mufflerSketchEdit == null)
{
LastErrorCode = ErrorCodes.EntityCreateError;
return(null);
}
// Глушитель прямоугольник, ширина и высота диаметр шляпки
var mufflerRectangleParam = new RectangleParameter(_kompasApp, _kompasApp.Parameters[0], _kompasApp.Parameters[0], figureParameters.BasePlanePoint);
if (mufflerSketchEdit.ksRectangle(mufflerRectangleParam.FigureParam) == 0)
{
LastErrorCode = ErrorCodes.Document2DRectangleCreateError;
return(null);
}
muffler.EndEntityEdit();
// Выдавливание глушителя, высота глушителя высота шляпки / 4
var extrusionParameters = new KompasExtrusionParameters(figureParameters.Document3DPart, Obj3dType.o3d_baseExtrusion, muffler.Entity, figureParameters.Direction, _kompasApp.Parameters[4] / 4.0);
var mufflerExtrusion = new KompasExtrusion(extrusionParameters, ExtrusionType.ByEntity);
if (mufflerExtrusion.LastErrorCode != ErrorCodes.OK)
{
LastErrorCode = mufflerExtrusion.LastErrorCode;
return(null);
}
return(mufflerExtrusion);
}
/// <summary>
/// Create muffler in detail in base plane axis
/// </summary>
/// <param name="figureParameters">Parameters of muffler</param>
/// <param name="basePlane">Base plane of muffler, by default is null</param>
/// <returns>Muffler extrusion or null if extrusion returns error</returns>
private KompasExtrusion CreateMuffler(MufflerParameters figureParameters, ksEntity basePlane = null)
{
// Muffler sketch
var muffler = new KompasSketch(figureParameters.Document3DPart, figureParameters.BasePlaneAxis);
// If base plane is set --
// -- create sketch of muffler on it
// instead of base plane axis
if (basePlane != null)
{
muffler = new KompasSketch(figureParameters.Document3DPart, basePlane);
}
if (muffler.LastErrorCode != ErrorCodes.OK)
{
LastErrorCode = muffler.LastErrorCode;
return(null);
}
var mufflerSketchEdit = muffler.BeginEntityEdit();
if (mufflerSketchEdit == null)
{
LastErrorCode = ErrorCodes.EntityCreateError;
return(null);
}
// Muffler rectangle, width and height are screw hat width
var mufflerRectangleParam = new RectangleParameter(_kompasApp, _kompasApp.Parameters[0], _kompasApp.Parameters[0], figureParameters.BasePlanePoint);
if (mufflerSketchEdit.ksRectangle(mufflerRectangleParam.FigureParam) == 0)
{
LastErrorCode = ErrorCodes.Document2DRectangleCreateError;
return(null);
}
muffler.EndEntityEdit();
// Muffler extrusion, height of muffler is nut height / 4
var extrusionParameters = new KompasExtrusionParameters(figureParameters.Document3DPart, Obj3dType.o3d_baseExtrusion, muffler.Entity, figureParameters.Direction, _kompasApp.Parameters[4] / 4.0);
var mufflerExtrusion = new KompasExtrusion(extrusionParameters, ExtrusionType.ByEntity);
if (mufflerExtrusion.LastErrorCode != ErrorCodes.OK)
{
LastErrorCode = mufflerExtrusion.LastErrorCode;
return(null);
}
return(mufflerExtrusion);
}
public void TestRectangleParameterNormal(ErrorCodes errorCode, double width, double height)
{
var appTest = new KompasApplicationTest();
var app = appTest.CreateKompasApplication();
var sketch = new KompasSketch(app.ScrewPart, Obj3dType.o3d_planeXOZ);
var sketchEdit = sketch.BeginEntityEdit();
var rectangleParam = new RectangleParameter(app, width, height, new KompasPoint2D(0.0, 0.0));
sketchEdit.ksRectangle(rectangleParam.FigureParam);
sketch.EndEntityEdit();
Assert.AreEqual(rectangleParam.LastErrorCode, errorCode);
}
/// <summary>
/// Создать глушитель оси базовой плоскости
/// </summary>
/// <param name="figureParameters">Parameters of muffler</param>
/// <param name="basePlane">Base plane of muffler, by default is null</param>
/// <returns>Выдавливание глушителя или ноль, если выдавливание возвращает ошибку</returns>
private KompasExtrusion CreateMuffler(MufflerParameters figureParameters,
ksEntity basePlane = null)
{
var muffler = new KompasSketch(figureParameters.Document3DPart,
figureParameters.BasePlaneAxis);
if (basePlane != null)
{
muffler = new KompasSketch(figureParameters.Document3DPart, basePlane);
}
var mufflerSketchEdit = muffler.BeginEntityEdit();
if (mufflerSketchEdit == null)
{
LastErrorCode = ErrorCodes.EntityCreateError;
return(null);
}
var mufflerRectangleParam = new RectangleParameter
(
_kompasApp,
_kompasApp.Parameters[0],
_kompasApp.Parameters[0],
figureParameters.BasePlanePoint
);
if (mufflerSketchEdit.ksRectangle(mufflerRectangleParam.FigureParam) == 0)
{
LastErrorCode = ErrorCodes.Document2DRegPolyCreateError;
return(null);
}
muffler.EndEntityEdit();
var extrusionParameters = new KompasExtrusionParameters
(
figureParameters.Document3DPart,
Obj3dType.o3d_baseExtrusion,
muffler.Entity,
figureParameters.Direction, _kompasApp.Parameters[4] / 4.0
);
var mufflerExtrusion = new KompasExtrusion(extrusionParameters,
ExtrusionType.ByEntity);
return(mufflerExtrusion);
}
/// <summary>
/// Create cutoff for flathead screwdriver
/// </summary>
/// <returns>Created entity of cutoff</returns>
protected ksEntity CreateCutout(double[] parameters)
{
var offsetX = parameters[0];
var offsetY = parameters[1];
var width = parameters[2];
var height = parameters[3];
var gost = 0.84;
var rectangleSketch = new KompasSketch(_kompasApp.ScrewPart,
Obj3dType.o3d_planeYOZ);
var rectangleSketchEdit = rectangleSketch.BeginEntityEdit();
var rectanglePoint = new KompasPoint2D(offsetX, offsetY);
var rectangleParam = new RectangleParameter(_kompasApp,
width, height, rectanglePoint);
if (rectangleSketchEdit.ksRectangle(rectangleParam.FigureParam, 0) == 0)
{
LastErrorCode = ErrorCodes.Document2DRegPolyCreateError;
return(null);
}
rectangleSketch.EndEntityEdit();
var extrusionParameters = new KompasExtrusionParameters
(
_kompasApp.ScrewPart,
Obj3dType.o3d_cutExtrusion,
rectangleSketch.Entity,
Direction_Type.dtNormal,
_kompasApp.Parameters[1] * gost
);
var rectangleExtrusion = new KompasExtrusion(
extrusionParameters,
ExtrusionType.ByEntity);
return(rectangleExtrusion.ExtrudedEntity);
}
/// <summary>
/// Создание шляпки винта с методом выдавливания
/// </summary>
/// <returns>Выдавленная шляпки винта для базовой части винта</returns>
private ksEntity CreateHat()
{
// 0.1 Create muffler, which base point is (D / 5, D / 5)
var basePoint = -(_kompasApp.Parameters[0] / 5.0);
var mufflerParameters = new MufflerParameters
{
Document3DPart = _kompasApp.ScrewPart,
Direction = Direction_Type.dtNormal,
BasePlaneAxis = Obj3dType.o3d_planeYOZ,
BasePlanePoint = new KompasPoint2D(basePoint, basePoint)
};
var mufflerManager = new Muffler(_kompasApp, mufflerParameters);
if (mufflerManager.LastErrorCode != ErrorCodes.OK)
{
LastErrorCode = mufflerManager.LastErrorCode;
return(null);
}
var mufflerExtrusion = mufflerManager.Extrusion;
if (mufflerExtrusion == null)
{
LastErrorCode = mufflerManager.LastErrorCode;
return(null);
}
// 1.1 Create hat
var screwHat = new KompasSketch(_kompasApp.ScrewPart, Obj3dType.o3d_planeYOZ);
if (screwHat.LastErrorCode != ErrorCodes.OK)
{
LastErrorCode = screwHat.LastErrorCode;
return(null);
}
var screwHatSketchEdit = screwHat.BeginEntityEdit();
if (screwHatSketchEdit == null)
{
LastErrorCode = screwHat.LastErrorCode;
return(null);
}
var screwHatPoint = new KompasPoint2D(0, 0);
if (screwHatSketchEdit.ksCircle(screwHatPoint.X, screwHatPoint.Y, _kompasApp.Parameters[0] / 2, 1) == 0)
{
LastErrorCode = ErrorCodes.Document2DCircleCreatingError;
return(null);
}
screwHat.EndEntityEdit();
// 1.2 Screw base extrusion
var extrusionParameters = new KompasExtrusionParameters(_kompasApp.ScrewPart, Obj3dType.o3d_baseExtrusion, screwHat.Entity, Direction_Type.dtReverse, _kompasApp.Parameters[4] * 0.84);
var screwHatExtrusion = new KompasExtrusion(extrusionParameters, ExtrusionType.ByEntity); // H
if (screwHatExtrusion.LastErrorCode != ErrorCodes.OK)
{
LastErrorCode = screwHatExtrusion.LastErrorCode;
return(null);
}
screwHatExtrusion.BaseFaceAreaState = KompasFaces.BaseFaceAreaState.BaseFaceAreaLower;
var extruded = screwHatExtrusion.ExtrudedEntity;
if (extruded == null)
{
LastErrorCode =
screwHatExtrusion.LastErrorCode;
return(null);
}
// 0.2 Delete muffler
if (!mufflerManager.DeleteDetail())
{
LastErrorCode = mufflerManager.LastErrorCode;
return(null);
}
//Create slot
var rectangleSketch = new KompasSketch(_kompasApp.ScrewPart, Obj3dType.o3d_planeYOZ);
if (rectangleSketch.LastErrorCode != ErrorCodes.OK)
{
LastErrorCode = rectangleSketch.LastErrorCode;
return(null);
}
var rectangleSketchEdit = rectangleSketch.BeginEntityEdit();
if (rectangleSketchEdit == null)
{
LastErrorCode = rectangleSketch.LastErrorCode;
return(null);
}
var rectanglePoint = new KompasPoint2D(-_kompasApp.Parameters[0], -_kompasApp.Parameters[5] / 2);
var rectangleParam = new RectangleParameter(_kompasApp, _kompasApp.Parameters[0] * 2, _kompasApp.Parameters[5], rectanglePoint);
if (rectangleSketchEdit.ksRectangle(rectangleParam.FigureParam, 0) == 0)
{
LastErrorCode = ErrorCodes.EntityDefinitionNull;
return(null);
}
rectangleSketch.EndEntityEdit();
extrusionParameters = new KompasExtrusionParameters(_kompasApp.ScrewPart, Obj3dType.o3d_cutExtrusion, rectangleSketch.Entity, Direction_Type.dtNormal, _kompasApp.Parameters[1] * 0.84);
var rectangleExtrusion = new KompasExtrusion(extrusionParameters, ExtrusionType.ByEntity); // m; выдавливание шлица методом вырезания на глубину m
if (rectangleExtrusion.LastErrorCode != ErrorCodes.OK)
{
LastErrorCode = rectangleExtrusion.LastErrorCode;
return(null);
}
return(extruded);
}
