/// <summary>
/// Task which is used for listening to incoming connection.
/// </summary>
private void ListenIncomingConnection()
{
while (true)
{
if (!_isTaskRunning)
{
continue;
}
if (_tcpListener == null)
{
continue;
}
// Wait the thread for signal.
_manualResetListenerEvent.WaitOne();
try
{
// Accept one connection at one time.
using (var tcpClient = _tcpListener.AcceptTcpClient())
using (var stream = tcpClient.GetStream())
{
// Read buffer from stream.
var buffer = new byte[64];
var rb = stream.Read(buffer, 0, buffer.Length);
if (rb != 64)
{
continue;
}
// Read commands sent from external.
var content = Encoding.UTF8.GetString(buffer, 0, buffer.Length);
content = content.Trim();
if (string.IsNullOrEmpty(content))
{
continue;
}
var information = $"(Port: {_terminalSetting.Value.Incoming.Port}) Received message: {content} from external component - {rb} bytes received";
Message.InitiateMessage(DateTime.Now, MessageType.Receive, "Received message", content);
Log.Info(information);
// Parse terminal message obtained from external terminal.
var terminalMessage = TerminalMessage.Parse(content, false);
if (terminalMessage == null)
{
Message.InitiateMessage(DateTime.Now, MessageType.Information,
$"Incoming message is incorrect. Restart listener in {Setting.CommandScanTaskInterval} millisecs.");
Thread.Sleep(Setting.CommandScanTaskInterval);
continue;
}
if ("5000".Equals(terminalMessage.CommandIndex))
{
continue;
}
// Display message to screen.
Log.Info("Command sending process is blocked for analyzing listening process.");
//Message.InitiateMessage(DateTime.Now, MessageType.Information, "Command sending process is blocked for analyzing listening process.");
try
{
// ProceedIncommingCommand incoming automated warehouse controller command
if (TerminalName.Material.Equals(_terminalSetting.Key))
{
MaterialAutoWarehouseController.ProceedIncommingCommand(terminalMessage,
AutoController.MaterialAutoWarehouseDeviceCode);
// Remove command from cache
MaterialAutoWarehouseController.RemoveCommand(x => x.IsAck && x.CommandIndex.Equals(terminalMessage.CommandIndex, StringComparison.InvariantCultureIgnoreCase) && x.CommandSequence.Equals(terminalMessage.CommandSequence, StringComparison.InvariantCultureIgnoreCase));
}
else if (TerminalName.PreProduct.Equals(_terminalSetting.Key))
{
if ("0100".Equals(terminalMessage.Command) || "0101".Equals(terminalMessage.Command))
{
PreProductAutoWarehouseController.ProceedIncommingCommand(terminalMessage,
AutoController.PreProductAutoWarehouseDeviceCode);
}
// Remove command from cache
PreProductAutoWarehouseController.RemoveCommand(x => x.IsAck && x.CommandIndex.Equals(terminalMessage.CommandIndex, StringComparison.InvariantCultureIgnoreCase) && x.CommandSequence.Equals(terminalMessage.CommandSequence, StringComparison.InvariantCultureIgnoreCase));
}
else if (TerminalName.Product.Equals(_terminalSetting.Key))
{
ProductAutoWarehouseController.ProceedIncommingCommand(terminalMessage,
AutoController.ProductAutoWarehouseDeviceCode);
// Remove command from cache
ProductAutoWarehouseController.RemoveCommand(x => x.IsAck && x.CommandIndex.Equals(terminalMessage.CommandIndex, StringComparison.InvariantCultureIgnoreCase) && x.CommandSequence.Equals(terminalMessage.CommandSequence, StringComparison.InvariantCultureIgnoreCase));
}
Message.InitiateMessage(DateTime.Now, MessageType.Information,
$"Command: {content} has been proceeded. Restart listener in {Setting.CommandScanTaskInterval} millisecs.");
Thread.Sleep(Setting.CommandScanTaskInterval);
}
catch (Exception exception)
{
Log.Error(exception.Message, exception);
Message.InitiateMessage(DateTime.Now, MessageType.Error,
$"Command: {content} hasn't been proceeded. Restart listener in {Setting.CommandScanTaskInterval} millisecs.");
Thread.Sleep(Setting.CommandScanTaskInterval);
}
}
}
catch (Exception exception)
{
Log.Error(exception.Message, exception);
}
Message.InitiateMessage(DateTime.Now, MessageType.Information, "Command sending process is unblocked.");
}
}
/// <summary>
/// Task which is used for scanning pending commands and broadcast to external terminals.
/// </summary>
private void SearchWarehousePendingCommands()
{
while (true)
{
// Task is not allowed to run.
if (!_isTaskRunning)
{
Thread.Sleep(Setting.CommandScanTaskInterval);
continue;
}
// Wait for signal from another thread to start this one.
_manualResetScannerEvent.WaitOne();
try
{
// Message will be built base on the being activated automated warehouse controller.
var message = "";
#region Message construction
// Operating warehouse controller is material.
if (TerminalName.Material.Equals(_terminalSetting.Key))
{
#region Automated warehouse status validation.
// No material warehouse controller has been configured in application setting file.
if (string.IsNullOrEmpty(AutoController.MaterialAutoWarehouseDeviceCode))
{
Message.InitiateMessage(DateTime.Now, MessageType.Information,
$"No material warehouse controller device code has been configured into application setting file. Restart in {Setting.CommandScanTaskInterval} milliseconds.");
// Sleep the thread for 3 secs.
Thread.Sleep(Setting.CommandScanTaskInterval);
continue;
}
// Material auto warehouse controller is offline.
if (!MaterialAutoWarehouseController.IsAutoWarehouseOnline(AutoController.MaterialAutoWarehouseDeviceCode))
{
Message.InitiateMessage(DateTime.Now, MessageType.Information,
$"Material automated warehouse is offline. Restart in {Setting.CommandScanTaskInterval} milliseconds.");
// Sleep the thread for awhile.
Thread.Sleep(Setting.CommandScanTaskInterval);
continue;
}
#endregion
#region Message initialization
try
{
// Find pending material command in database.
var commands = AutoController.FindPendingMaterialCommands();
// Command is not valid.
if (commands == null || commands.Count < 1)
{
//Message.InitiateMessage(DateTime.Now, MessageType.Information,
//$"No pending command has been found. Broadcaster will be restarted in {Setting.CommandScanTaskInterval} milliseconds.");
Thread.Sleep(Setting.CommandScanTaskInterval);
continue;
}
// ProceedIncommingCommand database records.
MaterialAutoWarehouseController.ProcessDataBase(commands, AutoController.MaterialAutoWarehouseDeviceCode, _terminalSetting.Value.Outgoing);
Thread.Sleep(Setting.CommandScanTaskInterval);
continue;
}
catch (Exception exception)
{
Log.Error(exception.Message, exception);
Message.InitiateMessage(DateTime.Now, MessageType.Error, exception.Message);
Thread.Sleep(Setting.CommandScanTaskInterval);
continue;
}
#endregion
}
else if (TerminalName.PreProduct.Equals(_terminalSetting.Key))
{
using (var context = new KCSGDbContext())
using (var unitOfWork = new UnitOfWork(context))
{
// delete off empty command
var preProduct = unitOfWork.PreProductWarehouseCommandRepository.GetMany(
i => i.F50_From.Trim().Equals(""))
.FirstOrDefault();
if (preProduct != null)
{
unitOfWork.PreProductWarehouseCommandRepository.Delete(preProduct);
unitOfWork.Commit();
}
}
#region Automated warehouse status validation.
// No material warehouse controller has been configured in application setting file.
if (string.IsNullOrEmpty(AutoController.PreProductAutoWarehouseDeviceCode))
{
Message.InitiateMessage(DateTime.Now, MessageType.Information,
$"No pre-product warehouse controller device code has been configured into application setting file. Restart in {Setting.CommandScanTaskInterval} milliseconds.");
// Sleep the thread for 3 secs.
Thread.Sleep(3000);
continue;
}
// Material auto warehouse controller is offline.
if (!PreProductAutoWarehouseController.IsAutoWarehouseOnline(AutoController.PreProductAutoWarehouseDeviceCode))
{
Message.InitiateMessage(DateTime.Now, MessageType.Information,
$"Pre-product automated warehouse is offline. Restart in {Setting.CommandScanTaskInterval} milliseconds.");
// Sleep the thread for awhile.
Thread.Sleep(Setting.CommandScanTaskInterval);
continue;
}
#endregion
#region Pre-product initialization
try
{
var commands = AutoController.FindPendingPreProductCommands();
if (commands == null || commands.Count < 1)
{
//Message.InitiateMessage(DateTime.Now, MessageType.Information,
//$"No pending command has been found. Listener will be restarted in {Setting.CommandScanTaskInterval} milliseconds.");
Thread.Sleep(Setting.CommandScanTaskInterval);
continue;
}
// ProceedIncommingCommand messages list.
PreProductAutoWarehouseController.ProceedMessages(commands,
AutoController.PreProductAutoWarehouseDeviceCode, _terminalSetting.Value.Outgoing);
Thread.Sleep(Setting.CommandScanTaskInterval);
}
catch (Exception exception)
{
Log.Error(exception.Message, exception);
Message.InitiateMessage(DateTime.Now, MessageType.Error, exception.Message);
}
#endregion
}
else if (TerminalName.Product.Equals(_terminalSetting.Key))
{
#region Automated warehouse status validation.
// No material warehouse controller has been configured in application setting file.
if (string.IsNullOrEmpty(AutoController.ProductAutoWarehouseDeviceCode))
{
Message.InitiateMessage(DateTime.Now, MessageType.Information,
$"No product warehouse controller device code has been configured into application setting file. Restart in {Setting.CommandScanTaskInterval} milliseconds.");
// Sleep the thread for 3 secs.
Thread.Sleep(3000);
continue;
}
// Material auto warehouse controller is offline.
if (!ProductAutoWarehouseController.IsAutoWarehouseOnline(AutoController.ProductAutoWarehouseDeviceCode))
{
Message.InitiateMessage(DateTime.Now, MessageType.Information,
$"Product automated warehouse is offline. Restart in {Setting.CommandScanTaskInterval} milliseconds.");
// Sleep the thread for awhile.
Thread.Sleep(Setting.CommandScanTaskInterval);
continue;
}
#endregion
#region Products initialization
try
{
// TODO: Disabled it at 2017-05-17 (Consider enable it back)
//var commands = AutoController.FindPendingProductCommands();
//if (commands == null || commands.Count < 1)
//{
// //Message.InitiateMessage(DateTime.Now, MessageType.Information,
// //$"No pending command has been found. Listener will be restarted in {Setting.CommandScanTaskInterval} milliseconds.");
// Thread.Sleep(Setting.CommandScanTaskInterval);
// continue;
//}
//ProductAutoWarehouseController.ProcessDataList(commands,
// AutoController.ProductAutoWarehouseDeviceCode, _terminalSetting.Value.Outgoing);
//Thread.Sleep(Setting.CommandScanTaskInterval);
var command = AutoController.FindPendingProductCommands().FirstOrDefault();
if (command == null)
{
Thread.Sleep(Setting.CommandScanTaskInterval);
continue;
}
ProductAutoWarehouseController.ProcessDataList(new[] { command },
AutoController.ProductAutoWarehouseDeviceCode, _terminalSetting.Value.Outgoing);
Thread.Sleep(Setting.CommandScanTaskInterval);
}
catch (Exception exception)
{
Log.Error(exception.Message, exception);
Message.InitiateMessage(DateTime.Now, MessageType.Error, exception.Message);
}
#endregion
}
else
{
Message.InitiateMessage(DateTime.Now, MessageType.Error,
$"Material, Pre-Product, Product should be selected to broadcast message. Restart message broadcaster in {Setting.CommandScanTaskInterval} milliseconds.");
Thread.Sleep(Setting.CommandScanTaskInterval);
continue;
}
#endregion
}
catch (EntityException entityException)
{
Log.Error(entityException.Message, entityException);
Message.ShowMessageBox(View.FindView(),
"There is something wrong with database. Please check database configuration in configuration file.",
"System Message", MessageBoxButton.OK, MessageBoxImage.Error, MessageBoxResult.OK);
Application.Current.Dispatcher.Invoke(() => { IsTaskRunning = false; });
}
catch (Exception exception)
{
Log.Error(exception.Message, exception);
}
}
}
/// <summary>
/// Callback which is fired when start button is clicked.
/// </summary>
/// <param name="owner"></param>
public void ExecuteClickToggle(Window owner)
{
// Listening progress is not running.
if (!_isTaskRunning)
{
var terminalSetting = _terminalSetting.Value;
var incoming = terminalSetting.Incoming;
var outgoing = terminalSetting.Outgoing;
// Update IP Endpoint.
IPEndPoint endPoint;
try
{
endPoint = new IPEndPoint(IPAddress.Any, incoming.Port);
}
catch (Exception exception)
{
Log.Error(exception.Message, exception);
Message.ShowMessageBox(owner, "Incoming message IP Endpoint is not valid.", "System Message",
MessageBoxButton.OK, MessageBoxImage.Error, MessageBoxResult.OK);
return;
}
try
{
// Tcp listener has been initialized.
if (_tcpListener != null)
{
_tcpListener.Stop();
}
// Initiate tcp listener.
_tcpListener = new TcpListener(terminalSetting.Incoming.Port);
// Start the listener.
_tcpListener.Start();
}
catch (Exception exception)
{
Log.Error(exception.Message, exception);
Message.ShowMessageBox(owner, "Something is wrong while listener opens.", "System Message",
MessageBoxButton.OK, MessageBoxImage.Error, MessageBoxResult.OK);
return;
}
// Clear all caches and messages.
Message.ClearMessages();
PreProductAutoWarehouseController.ClearQueue();
MaterialAutoWarehouseController.ClearQueue();
ProductAutoWarehouseController.ClearQueue();
// Update window state.
IsTaskRunning = true;
// Signal threads.
_manualResetListenerEvent.Set();
_manualResetScannerEvent.Set();
_manualResetStatusRequest.Set();
// Display message to UI.
Message.InitiateMessage(DateTime.Now, MessageType.Information,
$"Listener has been opened at {incoming.Address}:{incoming.Port}.");
Message.InitiateMessage(DateTime.Now, MessageType.Information,
$"Pending commands scanner has been initialized at port {outgoing.Address}:{outgoing.Port}.");
return;
}
//UninitiateIncomingMessageListeningTask();
_manualResetListenerEvent.Reset();
Message.InitiateMessage(DateTime.Now, MessageType.Information, "Listener has been manually stopped.");
//UninitiatePendingCommandScanningTask();
_manualResetScannerEvent.Reset();
Message.InitiateMessage(DateTime.Now, MessageType.Information, "Scanning pending command task was manually stopped.");
_manualResetStatusRequest.Reset();
IsTaskRunning = false;
}
