public static Polyline ConvertToPolyline(this Polyline2d pl2d, QuickTransaction tr)
{
var mSpace = (BlockTableRecord)SymbolUtilityServices.GetBlockModelSpaceId(tr.Db).GetObject(OpenMode.ForWrite);
if (pl2d.PolyType == Poly2dType.CubicSplinePoly || pl2d.PolyType == Poly2dType.QuadSplinePoly)
{
return(null);
}
var pline = new Polyline();
pline.ConvertFrom(pl2d, false);
mSpace.AppendEntity(pline);
tr.AddNewlyCreatedDBObject(pline, true);
pl2d.Erase();
return(pline);
}
private void ConvertToTargetProfiles(Document doc, Polyline2d partExtens)
{
var pnts = partExtens.GeometricExtents;
//删除边界
using (Transaction trans = doc.Database.TransactionManager.StartTransaction())
{
partExtens.Erase();
trans.Commit();
}
List <Entity> listCurveBoundary = new List <Entity>();
PromptSelectionResult psr = doc.Editor.SelectWindow(pnts.MaxPoint, pnts.MinPoint);
if (psr.Status == PromptStatus.OK)
{
List <ObjectId> oids = new List <ObjectId>();
foreach (SelectedObject item in psr.Value)
{
using (Transaction trans = doc.Database.TransactionManager.StartTransaction())
{
Entity ent = trans.GetObject(item.ObjectId, OpenMode.ForWrite) as Entity;
if (ent.Layer == "Rulers") //删除无用的标尺
{
ent.Erase();
}
if (ent.Layer == "Markingline")//marking 线
{
ent.Layer = "0";
ent.ColorIndex = 4;
}
if (ent is DBText && (ent.Layer == "Elevation Plane" || ent.Layer == "MarginSymbol" || ent.Layer == "ProfileSide"))//frame文字
{
ent.Layer = "0";
if (ent.Layer != "ProfileSide")
{
(ent as DBText).Height = 20;
}
ent.ColorIndex = 6;
}
if (ent is Spline)//存在样条曲线
{
var sp = ent as Spline;
sp.Erase();
Curve pline = sp.ToPolylineWithPrecision(1);
pline.Layer = "0";
pline.ColorIndex = 3;
var oid = AddToModelSpace(doc.Database, pline);
oids.Add(oid);
}
if ((ent is Line || ent is Arc) && ent.Layer == "ProfileWebOrient")//存在样条曲线
{
ent.Layer = "0";
ent.ColorIndex = 3;
}
trans.Commit();
}
}
if (oids.Count > 0)
{
using (Transaction trans = doc.Database.TransactionManager.StartTransaction())
{
List <Polyline> allPlines = new List <Polyline>();
foreach (ObjectId item in oids)
{
Polyline ent = trans.GetObject(item, OpenMode.ForWrite) as Polyline;
allPlines.Add(ent);
}
var minY = allPlines.Min(p => p.StartPoint.Y);
var targetPline = allPlines.Where(p => p.StartPoint.Y == minY).ToList()[0];
for (int i = allPlines.Count - 1; i >= 0; i--)
{
if (allPlines[i].ObjectId != targetPline.ObjectId)
{
allPlines[i].Erase();
allPlines.Remove(allPlines[i]);
}
}
var dbs = targetPline.GetOffsetCurves(-80);
foreach (DBObject item in dbs)
{
(item as Entity).Layer = "0";
(item as Entity).ColorIndex = 3;
AddToModelSpace(doc.Database, item as Entity);
}
trans.Commit();
}
}
}
}
public void ConvertToTargetPart(Document doc, Polyline2d partExtens)//$DrawingExtens
{
var pnts = partExtens.GeometricExtents;
using (Transaction trans = doc.Database.TransactionManager.StartTransaction())
{
partExtens.Erase();
trans.Commit();
}
List <Entity> listCurveBoundary = new List <Entity>();
PromptSelectionResult psr = doc.Editor.SelectWindow(pnts.MaxPoint, pnts.MinPoint);
if (psr.Status == PromptStatus.OK)
{
List <ObjectId> oids = new List <ObjectId>();
foreach (SelectedObject item in psr.Value)
{
using (Transaction trans = doc.Database.TransactionManager.StartTransaction())
{
Entity ent = trans.GetObject(item.ObjectId, OpenMode.ForWrite) as Entity;
if (ent is Curve && (ent.ColorIndex.ToString() == "1" || ent.ColorIndex.ToString() == "3"))
{
ent.Layer = "0"; ent.ColorIndex = 4;
} //内部marking线
if (ent is Curve && ent.ColorIndex.ToString() == "7" && ent.Layer != "_Auto")
{
ent.Layer = "0"; ent.ColorIndex = 3; listCurveBoundary.Add(ent);
} //外轮廓线
if (ent is Curve && ent.Layer == "_Auto")
{
ent.Layer = "0"; ent.ColorIndex = 4;
} //内部marking线
if (ent is DBText)
{
ent.Layer = "0"; ent.ColorIndex = 6;
} //外轮廓线
if (ent is Spline) //存在样条曲线的边界线
{
var sp = ent as Spline;
listCurveBoundary.Remove(ent as Curve);
sp.Erase();
Curve pline = sp.ToPolylineWithPrecision(1);
var oid = AddToModelSpace(doc.Database, pline);
oids.Add(oid);
}
trans.Commit();
}
}
using (Transaction trans = doc.Database.TransactionManager.StartTransaction())
{
Entity ent = null;
if (oids.Count == 0)//全是直线的情况
{
Polyline pline = new Polyline();
Point3dCollection pnts3d = new Point3dCollection();
for (int i = listCurveBoundary.Count - 1; i >= 0; i--)
{
Line l = listCurveBoundary[i] as Line;
pnts3d.Add(l.StartPoint);
pnts3d.Add(l.EndPoint);
l.Erase();
}
pline.CreatePolyline(pnts3d);
pline.Layer = "0";
AddToModelSpace(doc.Database, pline);
}
else
{
ent = oids[0].GetObject(OpenMode.ForWrite) as Entity;
for (int i = 1; i < oids.Count; i++)
{
listCurveBoundary.Add(oids[0].GetObject(OpenMode.ForWrite) as Entity);
}
Autodesk.AutoCAD.Geometry.IntegerCollection intSet = ent.JoinEntities(listCurveBoundary.ToArray());
for (int i = 0; i < listCurveBoundary.Count; i++)
{
listCurveBoundary[i].Erase();
}
}
trans.Commit();
}
}
}
public void convertTo3d()
{
Database db = HostApplicationServices.WorkingDatabase;
Autodesk.AutoCAD.DatabaseServices.TransactionManager myTm = db.TransactionManager;
Transaction myT = db.TransactionManager.StartTransaction();
//alle Blöcke wählen
myAutoCAD.Blöcke.Instance.init();
myAutoCAD.Blöcke.Instance.selectAll();
Messpunkt[] vMP = Blöcke.Instance.getMP;
//Linien
using (DocumentLock dl = Application.DocumentManager.MdiActiveDocument.LockDocument())
{
foreach (KeyValuePair <ObjectId, Line> valPair in m_LineCollection)
{
ObjectId id = valPair.Key;
Line objLine = valPair.Value;
Messpunkt MP = new Messpunkt();
Point2d startPt = new Point2d(objLine.StartPoint.X, objLine.StartPoint.Y);
Point2d endPt = new Point2d(objLine.EndPoint.X, objLine.EndPoint.Y);
Line line = (Line)myT.GetObject(id, OpenMode.ForWrite);
if (Blöcke.Instance.findPos(ref MP, startPt, 0.001) == ErrorStatus.OK)
{
line.StartPoint = MP.Position;
}
else
{
m_lsMP_Error.Add(new Messpunkt("", startPt.X, startPt.Y, null, null, 0));
}
if (Blöcke.Instance.findPos(ref MP, endPt, 0.001) == ErrorStatus.OK)
{
line.EndPoint = MP.Position;
}
else
{
m_lsMP_Error.Add(new Messpunkt("", endPt.X, endPt.Y, null, null, 0));
}
}
}
//Polylinien
using (DocumentLock dl = Application.DocumentManager.MdiActiveDocument.LockDocument())
{
foreach (KeyValuePair <ObjectId, Polyline> valPair in m_PolylineCollection)
{
ObjectId id = valPair.Key;
Polyline objPL = valPair.Value;
List <Point3d> lsPt3d = new List <Point3d>();
//Vertices iterieren
for (int i = 0; i < objPL.NumberOfVertices; i++)
{
Point2d pt = objPL.GetPoint2dAt(i);
Messpunkt MP = new Messpunkt();
if (Blöcke.Instance.findPos(ref MP, pt, 0.001) == ErrorStatus.OK)
{
lsPt3d.Add(MP.Position);
}
else
{
Point3d pt3d = new Point3d(pt.X, pt.Y, 0);
MP.Position = pt3d;
m_lsMP_Error.Add(MP);
lsPt3d.Add(pt3d);
}
}
//3dPolylinie erstellen
//Punktliste erzeugen
Point3d[] vPT3d = new Point3d[lsPt3d.Count];
for (int i = 0; i < lsPt3d.Count; i++)
{
vPT3d[i] = lsPt3d[i];
}
//3d Polylinie erzeugen
Point3dCollection pt3dCol = new Point3dCollection(vPT3d);
Polyline3d objPL3d = new Polyline3d(Poly3dType.SimplePoly, pt3dCol, objPL.Closed);
objPL3d.Layer = objPL.Layer;
//2d Polylinie löschen
Polyline pl = (Polyline)myT.GetObject(id, OpenMode.ForWrite);
pl.Erase(true);
//Polylinie in DB einfügen
try
{
BlockTable bt = (BlockTable)myT.GetObject(db.BlockTableId, OpenMode.ForRead, false);
BlockTableRecord btr = (BlockTableRecord)myT.GetObject(bt[BlockTableRecord.ModelSpace], OpenMode.ForWrite, false);
ObjectId idPL3d = btr.AppendEntity(objPL3d);
myT.AddNewlyCreatedDBObject(objPL3d, true);
objPL3d.Draw();
}
catch { }
}
}
//Polyline2d
using (DocumentLock dl = Application.DocumentManager.MdiActiveDocument.LockDocument())
{
foreach (KeyValuePair <ObjectId, Polyline2d> valPair in m_Polyline2dCollection)
{
ObjectId id = valPair.Key;
Polyline2d objPL2d = valPair.Value;
List <Point3d> lsPt3d = new List <Point3d>();
//Vertices iterieren
foreach (ObjectId idVertex in objPL2d)
{
Vertex2d vertex2d = (Vertex2d)myT.GetObject(idVertex, OpenMode.ForRead);
Point2d pt = new Point2d(vertex2d.Position.X, vertex2d.Position.Y);
Messpunkt MP = new Messpunkt();
if (Blöcke.Instance.findPos(ref MP, pt, 0.001) == ErrorStatus.OK)
{
lsPt3d.Add(MP.Position);
}
else
{
Point3d pt3d = new Point3d(pt.X, pt.Y, 0);
MP.Position = pt3d;
m_lsMP_Error.Add(MP);
lsPt3d.Add(pt3d);
}
}
//3dPolylinie erstellen
//Punktliste erzeugen
Point3d[] vPT3d = new Point3d[lsPt3d.Count];
for (int i = 0; i < lsPt3d.Count; i++)
{
vPT3d[i] = lsPt3d[i];
}
//3d Polylinie erzeugen
Point3dCollection pt3dCol = new Point3dCollection(vPT3d);
Polyline3d objPL3d = new Polyline3d(Poly3dType.SimplePoly, pt3dCol, objPL2d.Closed);
objPL3d.Layer = objPL2d.Layer;
//2d Polylinie löschen
Polyline2d pl2d = (Polyline2d)myT.GetObject(id, OpenMode.ForWrite);
pl2d.Erase(true);
//Polylinie in DB einfügen
try
{
BlockTable bt = (BlockTable)myT.GetObject(db.BlockTableId, OpenMode.ForRead, false);
BlockTableRecord btr = (BlockTableRecord)myT.GetObject(bt[BlockTableRecord.ModelSpace], OpenMode.ForWrite, false);
ObjectId idPL3d = btr.AppendEntity(objPL3d);
myT.AddNewlyCreatedDBObject(objPL3d, true);
objPL3d.Draw();
}
catch { }
}
}
//Fehler anzeigen
if (m_lsMP_Error.Count > 0)
{
foreach (Messpunkt MP in m_lsMP_Error)
{
MP.mark(0.2);
}
System.Windows.Forms.MessageBox.Show(m_lsMP_Error.Count.ToString() + " Fehler gefunden!");
}
else
{
System.Windows.Forms.MessageBox.Show("3d Konvertierung fehlerfrei durchgeführt!");
}
myT.Commit();
}