public GMapMarkerCross(PointLatLng p)
: base(p)
{
#if !PocketPC
Pen = new Pen(Brushes.Red, 1);
#else
Pen = new Pen(Color.Red, 1);
#endif
}
public GMarkerCross(PointLatLng p)
: base(p)
{
#if !PocketPC
Pen = new Pen(Brushes.Red, 1);
#else
Pen = new Pen(Color.Red, 1);
#endif
IsHitTestVisible = false;
}
public GMapMarkerRect(PointLatLng p)
: base(p)
{
Pen = new Pen(Brushes.Transparent, 5);
// do not forget set Size of the marker
// if so, you shall have no event on it ;}
Size = new System.Drawing.Size(20, 20);
Offset = new System.Drawing.Point(-Size.Width / 2, -Size.Height / 2);
}
public GMarkerGoogle(PointLatLng p, GMarkerGoogleType type)
: base(p)
{
this.Type = type;
if(type != GMarkerGoogleType.none)
{
LoadBitmap();
}
}
public GMarkerGoogle(PointLatLng p, GMarkerGoogleType type, bool showShadow = true)
: base(p)
{
this.Type = type;
this.ShowShadow = showShadow;
if(type != GMarkerGoogleType.none)
{
LoadBitmap();
}
}
public GMapMarkerTransparentGoogleGreen(PointLatLng p)
: base(p)
{
System.Reflection.Assembly ass = System.Reflection.Assembly.GetExecutingAssembly();
String resShadow = "GMap.NET.WindowsMobile.Resources.shadow50.png";
String resMarker = "GMap.NET.WindowsMobile.Resources.bigMarkerGreen.png";
IGMapTransparentBitmap shadow = GMapMarkerTransparent.LoadTransparentBitmap(ass.GetManifestResourceStream(resShadow));
IGMapTransparentBitmap marker = GMapMarkerTransparent.LoadTransparentBitmap(ass.GetManifestResourceStream(resMarker));
bitmaps = new IGMapTransparentBitmap[] { shadow, marker };
Size = new System.Drawing.Size(marker.Width, marker.Height);
Offset = new System.Drawing.Point(-10, -34);
}
/// <summary>
/// marker using manual bitmap, NonSerialized
/// </summary>
/// <param name="p"></param>
/// <param name="Bitmap"></param>
public GMarkerGoogle(PointLatLng p, Bitmap Bitmap)
: base(p)
{
this.Bitmap = Bitmap;
Size = new System.Drawing.Size(Bitmap.Width, Bitmap.Height);
Offset = new Point(-Size.Width / 2, -Size.Height);
}
/// <summary>
/// NotImplemented
/// </summary>
/// <param name="direction"></param>
/// <param name="start"></param>
/// <param name="wayPoints"></param>
/// <param name="avoidHighways"></param>
/// <param name="avoidTolls"></param>
/// <param name="walkingMode"></param>
/// <param name="sensor"></param>
/// <param name="metric"></param>
/// <returns></returns>
public DirectionsStatusCode GetDirections(out GDirections direction, PointLatLng start, IEnumerable<PointLatLng> wayPoints, PointLatLng end, bool avoidHighways, bool avoidTolls, bool walkingMode, bool sensor, bool metric)
{
throw new NotImplementedException();
}
string MakeRoutingUrl(PointLatLng start, PointLatLng end, string travelType, string language, string units)
{
// http://developers.cloudmade.com/projects/routing-http-api/examples/
// http://routes.cloudmade.com/YOUR-API-KEY-GOES-HERE/api/0.3/start_point,[[transit_point1,...,transit_pointN]],end_point/route_type[/route_type_modifier].output_format[?lang=(en|de)][&units=(km|miles)]
return string.Format(CultureInfo.InvariantCulture, UrlFormat, Key, Version, start.Lat, start.Lng, end.Lat, end.Lng, travelType, language, units);
}
public GeoCoderStatusCode GetPlacemarks(PointLatLng location, out List<Placemark> placemarkList)
{
return GetPlacemarkFromReverseGeocoderUrl(MakeReverseGeocoderUrl(location, LanguageStr), out placemarkList);
}
/// <summary>
/// return local coordinates from lat/lng
/// </summary>
/// <param name="latlng"></param>
/// <returns></returns>
public GPoint FromLatLngToLocal(PointLatLng latlng)
{
GPoint pLocal = Provider.Projection.FromLatLngToPixel(latlng, Zoom);
pLocal.Offset(renderOffset);
pLocal.OffsetNegative(compensationOffset);
return pLocal;
}
/// <summary>
/// ищет наиболее подходящую к заданной точке МС и получает её ряд. Если ряд не найден, то возвращает null
/// </summary>
/// <param name="coordinates"></param>
/// <param name="r"></param>
/// <param name="actionPercent"></param>
/// <param name="Range">ряд, для которого подбирается функция</param>
/// <exception cref="GetBaseRangeException">Возвращает иснформацию о параметрах, мешающих получить ближайшую МС</exception>
/// <returns></returns>
internal static RawRange TryGetBaseRange(RawRange Range, PointLatLng coordinates, out double r, Action <int, string> actionPercent)
{
bool nlaw = CheckNormalLaw(Range, Vars.Options.NormalLawPirsonCoefficientDiapason);
if (!nlaw)
{
throw new WindEnergyException("Исходный ряд не подчиняется нормальному закону распределения");
}
DateTime from = Range.Min((ri) => ri.Date).Date, to = Range.Max((ri) => ri.Date).Date;
List <RP5MeteostationInfo> mts = Vars.RP5Meteostations.GetNearestMS(coordinates, Vars.Options.NearestMSRadius, false);
Dictionary <double, double> funcSpeed = Range.GetFunction(MeteorologyParameters.Speed); //функция скорости на заданном ряде
RawRange res = null;
double rmax = double.MinValue, total_rmax = double.MinValue;
RP5ru provider = new RP5ru(Vars.Options.CacheFolder + "\\rp5.ru");
for (int i = 0; i < mts.Count; i++)
{
if (actionPercent != null)
{
actionPercent.Invoke((int)((i * 1d / mts.Count) * 100d), "Поиск подходящей МС...");
}
RP5MeteostationInfo m = mts[i];
//если нет диапазона измерений в БД, то загружаем с сайта
if (m.MonitoringFrom == DateTime.MinValue)
{
provider.GetMeteostationExtInfo(ref m);
}
//если для этой МС нет наблюдений в этом периоде, то переходим на другую
if (m.MonitoringFrom > from)
{
continue;
}
//загрузка ряда с очередной МС
RawRange curRange = null;
try
{ curRange = provider.GetRange(from, to, m); }
catch (WindEnergyException wex) // если не удалось получить ряд этой МС, то переходим к следующей
{ continue; }
curRange = new Checker().ProcessRange(curRange, new CheckerParameters(LimitsProviders.StaticLimits, curRange.Position), out CheckerInfo info, null); //исправляем ошибки
//СКОРОСТЬ
MeteorologyParameters parameter = MeteorologyParameters.Speed;
Dictionary <double, double> funcSpeedCurrentNearest = curRange.GetFunction(parameter); //функция скорости на текущей МС
//проверка на нормальный закон распределения
bool normal = CheckNormalLaw(curRange, Vars.Options.NormalLawPirsonCoefficientDiapason);
if (!normal)
{
continue;
}
//расчёт и проверка коэфф корреляции
List <double>[] table = calcTableCoeff(funcSpeed, funcSpeedCurrentNearest); //таблица для расчет коэффициентов
double current_r = getParameterR(table); //коэффициент корреляции
//общий максимальный коэфф корреляции
if (current_r > total_rmax)
{
total_rmax = current_r;
}
//проверяем, можно ли взять эту МС
if (current_r > rmax)
{
//истина, если надо проверять этот параметр на допустимый диапазон корреляции
bool needCheck = Vars.Options.MinimalCorrelationControlParametres.Contains(parameter);
if ((needCheck && current_r >= Vars.Options.MinimalCorrelationCoeff) || !needCheck)
{
rmax = current_r;
res = curRange;
}
}
}
r = rmax;
if (res == null)
{
RP5MeteostationInfo mi = Vars.RP5Meteostations.GetNearestMS(coordinates);
double l = EarthModel.CalculateDistance(mi.Position, coordinates);
throw new GetBaseRangeException(total_rmax, Vars.Options.MinimalCorrelationCoeff, l, mts.Count, Vars.Options.NearestMSRadius, coordinates);
}
return(res);
}
// The Coogle Directions API: http://tinyurl.com/6vv4cac
string MakeDirectionsUrl(PointLatLng start, PointLatLng end, string language, bool avoidHighways, bool avoidTolls, bool walkingMode, bool sensor, bool metric)
{
string av = (avoidHighways ? "&avoid=highways" : string.Empty) + (avoidTolls ? "&avoid=tolls" : string.Empty); // 6
string mt = "&units=" + (metric ? "metric" : "imperial"); // 7
string wk = "&mode=" + (walkingMode ? "walking" : "driving"); // 8
return string.Format(CultureInfo.InvariantCulture, DirectionUrlFormatPoint, start.Lat, start.Lng, end.Lat, end.Lng, sensor.ToString().ToLower(), language, av, mt, wk, ServerAPIs);
}
string MakeRoutingUrl(PointLatLng start, PointLatLng end, string travelType)
{
return(string.Format(CultureInfo.InvariantCulture, RoutingUrlFormat, start.Lat, start.Lng, end.Lat, end.Lng, travelType));
}
public PointLatLng Point()
{
PointLatLng pnt = new PointLatLng(Lat, Lng);
return(pnt);
}
public GeoCoderStatusCode GetPlacemarks(PointLatLng location, out List <Placemark> placemarkList)
{
throw new NotImplementedException("use GetPlacemark");
}
string MakeReverseGeocoderUrl(PointLatLng pt)
{
return(string.Format(CultureInfo.InvariantCulture, ReverseGeocoderUrlFormat, pt.Lat, pt.Lng));
}
/// <summary>
/// gets local coordinate from world coordinate
/// </summary>
/// <param name="point"></param>
/// <returns></returns>
public GPoint FromLatLngToLocal(PointLatLng point)
{
return(fCore.FromLatLngToLocal(point));
}
private PointLatLng?CheckForIntersection(PointLatLng p1, PointLatLng p2, PointLatLng p3, PointLatLng p4)
{
// сортируем точки
if (p2.Lat < p1.Lat)
{
PointLatLng tmp = p1;
p1 = p2;
p2 = tmp;
}
if (p4.Lat < p3.Lat)
{
PointLatLng tmp = p3;
p3 = p4;
p4 = tmp;
}
//проверим существование потенциального интервала для точки пересечения отрезков
if (p2.Lat < p1.Lat)
{
//ибо у отрезков нету взаимной абсциссы
return(null);
}
//найдём коэффициенты уравнений, содержащих отрезки
//f1(x) = A1*x + b1 = y
//f2(x) = A2*x + b2 = y
//если первый отрезок вертикальный
if (p1.Lat - p2.Lat == 0)
{
//найдём Xa, Ya - точки пересечения двух прямых
double resX = p1.Lat;
double tg = (p3.Lng - p4.Lng) / (p3.Lat - p4.Lat);
double shift = p3.Lng - tg * p4.Lat;
double resultY = tg * resX + shift;
if (p3.Lat <= resX &&
p4.Lat >= resX &&
Math.Min(p1.Lng, p2.Lng) <= resultY &&
Math.Max(p1.Lng, p2.Lng) >= resultY)
{
return(new PointLatLng(resX, resultY));
}
return(null);
}
//если второй отрезок вертикальный
if (p3.Lat - p4.Lat == 0)
{
//найдём Xa, Ya - точки пересечения двух прямых
double resX = p3.Lat;
double tg = (p1.Lng - p2.Lng) / (p1.Lat - p2.Lat);
double shift = p1.Lng - tg * p1.Lat;
double resultY = tg * resX + shift;
if (p1.Lat <= resX &&
p2.Lat >= resX &&
Math.Min(p3.Lng, p4.Lng) <= resultY &&
Math.Max(p3.Lng, p4.Lng) >= resultY)
{
return(new PointLatLng(resX, resultY));
}
return(null);
}
//оба отрезка невертикальные
double tg1 = (p1.Lng - p2.Lng) / (p1.Lat - p2.Lat);
double tg2 = (p3.Lng - p4.Lng) / (p3.Lat - p4.Lat);
double shift1 = p1.Lng - tg1 * p1.Lat;
double shift2 = p3.Lng - tg2 * p3.Lat;
if (tg1 == tg2)
{
//отрезки параллельны
return(null);
}
//Xa - абсцисса точки пересечения двух прямых
double resultX = (shift2 - shift1) / (tg1 - tg2);
if ((resultX < Math.Max(p1.Lat, p3.Lat)) || (resultX > Math.Min(p2.Lat, p4.Lat)))
{
//точка Xa находится вне пересечения проекций отрезков на ось X
return(null);
}
else
{
double resultY = tg1 * resultX + shift1;
return(new PointLatLng(resultX, resultY));
}
}
/// <summary>
/// создаёт новый интерполятор для заданной точки с заданной функций и типом расчетного параметра
/// </summary>
/// <param name="func">известные значения функции в заданной точке</param>
/// <param name="coordinates">координаты точки, для которой известны значения func</param>
/// <param name="parameterType">тип мтеорологического параметра</param>
/// <param name="replaceExistMeasurements">Заменять существующие измерения в исходном ряде на расчетные</param>
public NearestMSInterpolateMethod(Dictionary <double, double> func, PointLatLng coordinates, MeteorologyParameters parameterType, bool replaceExistMeasurements)
: this(func, getNearestRange(func, coordinates), parameterType, replaceExistMeasurements)
{
}
public GMapMarkerGoogleRed(PointLatLng p)
: base(p)
{
Size = SizeSt;
Offset = new Point(-10, -34);
}
private void Map_MouseDoubleClick(object sender, MouseButtonEventArgs e)
{
if (searchDist.IsChecked == true)
{
PointLatLng point = Map.FromLocalToLatLng((int)e.GetPosition(Map).X, (int)e.GetPosition(Map).Y);
//pts.Add(point);
sorting(objs, point);
objectList.Items.Clear();
foreach (MapObject cm in objs)
{
objectList.Items.Add(cm.getTitle() + " " + Math.Round(cm.getDistance(point)).ToString());
}
}
else
{
PointLatLng point = Map.FromLocalToLatLng((int)e.GetPosition(Map).X, (int)e.GetPosition(Map).Y);
pts.Add(point);
if (objType.SelectedIndex > -1)
{
if (objType.SelectedIndex == 0)
{
//if (car == null)
Car car = new Car(objTitle.Text, point, Map);
objs.Add(car);
cars.Add(car);
carMarker = car.getMarker();
}
if (objType.SelectedIndex == 1)
{
if (human == null)
{
human = new Human(objTitle.Text, point);
objs.Add(human);
humMarker = human.getMarker();
human.setPosition(point);
humMarker.Position = point;
}
}
if (objType.SelectedIndex == 2)
{
if ((human != null) && (loc == null))
{
human.moveTo(point);
loc = new Location(objTitle.Text, point);
objs.Add(loc);
locMarker = loc.getMarker();
}
}
if (objType.SelectedIndex == 3)
{
Area a = new Area(objTitle.Text, pts);
objs.Add(a);
Map.Markers.Add(a.getMarker());
}
Map.Markers.Clear();
foreach (MapObject cm in objs)
{
Map.Markers.Add(cm.getMarker());
}
//Map.Markers.Add(dst);
pts.Clear();
}
}
}
public GMapMarker(PointLatLng pos)
{
this.Position = pos;
}
// current point changed
void MainMap_OnCurrentPositionChanged(PointLatLng point)
{
//center.Position = point;
//textBoxLat.Text = point.Lat.ToString(CultureInfo.InvariantCulture);
//textBoxLng.Text = point.Lng.ToString(CultureInfo.InvariantCulture);
}
/// <summary>
/// NotImplemented
/// </summary>
/// <param name="status"></param>
/// <param name="start"></param>
/// <param name="end"></param>
/// <param name="avoidHighways"></param>
/// <param name="avoidTolls"></param>
/// <param name="walkingMode"></param>
/// <param name="sensor"></param>
/// <param name="metric"></param>
/// <returns></returns>
public IEnumerable<GDirections> GetDirections(out DirectionsStatusCode status, PointLatLng start, PointLatLng end, bool avoidHighways, bool avoidTolls, bool walkingMode, bool sensor, bool metric)
{
// TODO: add alternative directions
throw new NotImplementedException();
}
private void DrawDot(PointLatLng latlng)
{
}
public MapRoute GetRoute(PointLatLng start, PointLatLng end, bool avoidHighways, bool walkingMode, int Zoom)
{
string tooltip;
int numLevels;
int zoomFactor;
MapRoute ret = null;
List<PointLatLng> points = GetRoutePoints(MakeRouteUrl(start, end, LanguageStr, avoidHighways, walkingMode), Zoom, out tooltip, out numLevels, out zoomFactor);
if (points != null)
{
ret = new MapRoute(points, tooltip);
}
return ret;
}
void DrawMap()
{
int a = 0;
DateTime starttime = DateTime.MinValue;
int startdelta = 0;
DateTime workingtime = starttime;
DateTime lastdrawn = DateTime.MinValue;
List <PointLatLng> routelist = new List <PointLatLng>();
//zg1.GraphPane.GraphObjList.Clear();
foreach (DataGridViewRow datarow in dataGridView1.Rows)
{
if (datarow.Cells[1].Value.ToString() == "GPS")
{
if (!logformat.ContainsKey("GPS"))
{
break;
}
int index = FindInArray(logformat["GPS"].FieldNames, "Lat");
if (index == -1)
{
a++;
continue;
}
int index2 = FindInArray(logformat["GPS"].FieldNames, "Lng");
if (index2 == -1)
{
a++;
continue;
}
int index3 = FindInArray(logformat["GPS"].FieldNames, "Status");
if (index3 == -1)
{
a++;
continue;
}
if (double.Parse(datarow.Cells[index3 + 2].Value.ToString()) != 3)
{
a++;
continue;
}
string lat = datarow.Cells[index + 2].Value.ToString();
string lng = datarow.Cells[index2 + 2].Value.ToString();
PointLatLng pnt = new PointLatLng()
{
};
pnt.Lat = double.Parse(lat);
pnt.Lng = double.Parse(lng);
routelist.Add(pnt);
}
a++;
}
GMapRoute route = new GMapRoute(routelist, "route");
mapoverlay.Routes.Add(route);
myGMAP1.ZoomAndCenterRoute(route);
myGMAP1.RoutesEnabled = true;
}
string MakeReverseGeocoderUrl(PointLatLng pt, string language)
{
return string.Format(CultureInfo.InvariantCulture, ReverseGeocoderUrlFormat, ServerAPIs, pt.Lat, pt.Lng, language);
}
public GMarkerArrow(PointLatLng p)
: base(p)
{
Scale = 1;
}
public void dibujarSolucion(bool ponderado)
{
mapaSolucion.Overlays.Clear();
GMapOverlay marcadores = new GMapOverlay("ciudades");
GMapOverlay lineas = new GMapOverlay("rutas");
for (int i = 0; i < grafoViajero.Count; i++)
{
Ciudad ciudad = grafoViajero.ElementAt(i);
GMarkerGoogle iniciom = null;
if (i == 0)
{
iniciom = new GMarkerGoogle(new PointLatLng(ciudad.Latitud, ciudad.Longitud), GMarkerGoogleType.red_dot);
}
else
{
iniciom = new GMarkerGoogle(new PointLatLng(ciudad.Latitud, ciudad.Longitud), GMarkerGoogleType.blue_dot);
}
iniciom.ToolTipText = "Nombre: " + ciudad.Nombre + "\n" +
"Latitud : " + ciudad.Latitud + "\n" +
"Longitud : " + ciudad.Longitud + "\n" +
"Poblacion : " + ciudad.TotalPoblacion;
marcadores.Markers.Add(iniciom);
if (ponderado)
{
Ciudad otraciudad = null;
if (i == grafoViajero.Count - 1)
{
otraciudad = grafoViajero.ElementAt(0);
}
else
{
otraciudad = grafoViajero.ElementAt(i + 1);
}
List <PointLatLng> points = new List <PointLatLng>();
points.Add(new PointLatLng(ciudad.Latitud, ciudad.Longitud));
points.Add(new PointLatLng(otraciudad.Latitud, otraciudad.Longitud));
GMapPolygon polygon = new GMapPolygon(points, "mypolygon");
polygon.Fill = new SolidBrush(Color.FromArgb(50, Color.Red));
polygon.Stroke = new Pen(Color.Red, 5);
lineas.Polygons.Add(polygon);
double lat = (ciudad.Latitud + otraciudad.Latitud) / 2;
double lon = (ciudad.Longitud + otraciudad.Longitud) / 2;
PointLatLng puntoDistancia = new PointLatLng(lat, lon);
GMarkerCross marcadorDistancia = new GMarkerCross(puntoDistancia);
double distancia = Math.Round(ciudad.distancia(otraciudad, 'K'), 2);
marcadorDistancia.ToolTipText = distancia + " Km";
marcadorDistancia.ToolTipMode = MarkerTooltipMode.Always;
marcadores.Markers.Add(marcadorDistancia);
mapaSolucion.Overlays.Add(lineas);
}
mapaSolucion.Overlays.Add(marcadores);
}
mapaSolucion.Zoom = 1;
mapaSolucion.Zoom = 0;
}
public async void UpdateWidgets(object sender, EventArgs e)
{
//162;-0.02;-0.12;0.88;0.06;0.12;0.00;277.36;247.41;384.70;1028.69;25.00;X;X;X;X;X;1:0:0;0.00;1.57;-7.42;-43.99
// RSSI; framenr; xaccel; yaccel; zaccel; xtilt; ytilt; ztilt; xmag; ymag; zmag; pressure; temp; lat; long; alt; speed; course; h:m:s:ms; hall
DataStream.AppendText(rxString);
string[] packetElems = Utils.ParsePacket(rxString);
double time = Convert.ToInt32(timer.Elapsed.TotalSeconds);
if (packetElems == null || packetElems.Length != 24)
{
Console.WriteLine("Skipped corrupted packet");
return;
}
rssitxt.Text = packetElems[0] + " dBm";
framenrtxt.Text = packetElems[1];
xacceltxt.Text = packetElems[2] + " G";
yacceltxt.Text = packetElems[3] + " G";
zacceltxt.Text = packetElems[4] + " G";
xtilttxt.Text = packetElems[5] + " °/s";
ytilttxt.Text = packetElems[6] + " °/s";
ztilttxt.Text = packetElems[7] + " °/s";
xmagtxt.Text = packetElems[8] + " µT";
ymagtxt.Text = packetElems[9] + " µT";
zmagtxt.Text = packetElems[10] + " µT";
psrtxt.Text = packetElems[11] + " hPa";
temptxt.Text = packetElems[12] + " C";
speedtxt.Text = packetElems[16] + "m/s";
coursetxt.Text = packetElems[17] + " °";
timetxt.Text = packetElems[18];
halltxt.Text = packetElems[19] + " Hz";
pitchtxt.Text = packetElems[20] + " °";
rolltxt.Text = packetElems[21] + " °";
yawtxt.Text = packetElems[22] + " °";
volttxt.Text = packetElems[23];
double pressure = Convert.ToDouble(packetElems[11]);
double temperature = Convert.ToDouble(packetElems[12]);
Upd.UpdateChart(chart2, pressure, time);
if (packetElems[13] == "x" || packetElems[13] == "X")
{
lattxt.Text = "NO GPS";
longtxt.Text = "NO GPS";
previousAltitude = -1;
}
else
{
// lat; long; alt; speed; course
lattxt.Text = packetElems[13];
longtxt.Text = packetElems[14];
double latitude = Convert.ToDouble(packetElems[13]);
double Longitude = Convert.ToDouble(packetElems[14]);
double Altitude;
if (checkBox2.Checked)
{
Altitude = Utils.HypsometricFormula(P0, pressure, temperature);
alttxt.Text = Altitude + " m";
}
else
{
alttxt.Text = packetElems[15] + " m";
Altitude = Convert.ToDouble(packetElems[15]);
}
double speed = Convert.ToDouble(packetElems[16]);
double course = Convert.ToDouble(packetElems[17]);
double fallingSpeed;
if (previousAltitude == -1)
{
fallingSpeed = 0;
}
else
{
fallingSpeed = previousAltitude - Altitude;
}
gauge1.Update(fallingSpeed);
Upd.UpdateMap(map, latitude, Longitude, Altitude, fallingSpeed, speed, (int)course);
lastPoint = new PointLatLng(latitude, Longitude);
chart3D.Update(latitude, Longitude, Altitude);
vertveltxt.Text = fallingSpeed.ToString() + " m/s";
previousAltitude = Altitude;
Upd.UpdateChart(chart4, Altitude, time);
Upd.UpdateChart(chart6, speed, time);
pictureBox1.Image = Compass.DrawCompass(course / 100, 0, 80, 0, 80, pictureBox1.Size);
}
pitch = float.Parse(packetElems[20], CultureInfo.InvariantCulture.NumberFormat);
roll = float.Parse(packetElems[21], CultureInfo.InvariantCulture.NumberFormat);
yaw = float.Parse(packetElems[22], CultureInfo.InvariantCulture.NumberFormat);
Upd.UpdateChart(chart1, temperature, time);
// double course = (Convert.ToDouble(packetElems[17])/100);
//Upd.UpdateChart(chart7, course, time);
double Hall = Convert.ToDouble(packetElems[19]);
double windSpeed = Utils.WindSpeed(Hall);
Upd.UpdateChart(chart3, windSpeed, time);
windtxt.Text = Convert.ToString(windSpeed);;
double signal = Convert.ToDouble(packetElems[0]);
//gauge2.Update(chart5, signal, time);
double signalPercent = Utils.SignalStrengthInPercent(signal);
gauge2.Update(signalPercent);
// socketio
string json = JsonConvert.SerializeObject(new { psrtxt = psrtxt.Text, tmptxt = temptxt.Text, txtLat = lattxt.Text, txtLong = longtxt.Text, hghttext = alttxt.Text });
try
{
_ = client.EmitAsync("data", json);
}
catch { }
}
public MapRoute GetRoute(PointLatLng start, PointLatLng end, bool avoidHighways, bool walkingMode, int Zoom)
{
List<PointLatLng> points = GetRoutePoints(MakeRoutingUrl(start, end, walkingMode ? TravelTypeFoot : TravelTypeMotorCar, LanguageStr, "km"));
MapRoute route = points != null ? new MapRoute(points, walkingMode ? WalkingStr : DrivingStr) : null;
return route;
}
public GMapMarkerElevation(byte [,] imageData, int idx, int idy, RectLatLng rect, PointLatLng currentloc)
: base(currentloc)
{
this.rect = rect;
IsHitTestVisible = false;
//create a new Bitmap
Bitmap bmp = new Bitmap(idx, idy, PixelFormat.Format32bppArgb);
//lock it to get the BitmapData Object
BitmapData bmData =
bmp.LockBits(new Rectangle(0, 0, bmp.Width, bmp.Height), ImageLockMode.WriteOnly, PixelFormat.Format32bppArgb);
//now we have to convert the 2 dimensional array into a one dimensional byte-array for use with 8bpp bitmaps
// use stride and height to prevent stride mod 4 issues
int[] pixels = new int[(bmData.Stride / 4) * bmData.Height];
for (int y = 0; y < idy; y++)
{
for (int x = 0; x < idx; x++)
{
pixels[(y * (bmData.Stride / 4) + x)] = ConvertColor(imageData[x, y]);
}
}
//copy the bytes
System.Runtime.InteropServices.Marshal.Copy(pixels, 0, bmData.Scan0, (bmData.Stride / 4) * bmData.Height);
//never forget to unlock the bitmap
bmp.UnlockBits(bmData);
bmp.MakeTransparent();
//display
elevation = bmp;
}
/// <summary>
/// return local coordinates from lat/lng
/// </summary>
/// <param name="latlng"></param>
/// <returns></returns>
public Point FromLatLngToLocal(PointLatLng latlng)
{
Point pLocal = Projection.FromLatLngToPixel(latlng, Zoom);
pLocal.Offset(renderOffset);
return pLocal;
}
public Placemark? GetPlacemark(PointLatLng location, out GeoCoderStatusCode status)
{
// http://msdn.microsoft.com/en-us/library/ff701713.aspx
throw new NotImplementedException();
}
public Human(string title, PointLatLng point) : base(title)
{
this.point = point;
}
string MakeRouteUrl(PointLatLng start, PointLatLng end, string language, bool avoidHighways, bool walkingMode)
{
string addition = avoidHighways ? "&avoid=highways" : string.Empty;
string mode = walkingMode ? "Walking" : "Driving";
return string.Format(CultureInfo.InvariantCulture, RouteUrlFormatPointLatLng, mode, start.Lat, start.Lng, end.Lat, end.Lng, addition, ClientKey);
}
public Placemark?GetPlacemark(PointLatLng location, out GeoCoderStatusCode status)
{
// http://msdn.microsoft.com/en-us/library/ff701713.aspx
throw new NotImplementedException();
}
string MakeReverseGeocoderUrl(PointLatLng pt)
{
return string.Format(CultureInfo.InvariantCulture, ReverseGeocoderUrlFormat, pt.Lat, pt.Lng, AppId, !string.IsNullOrEmpty(LanguageStr) ? "&locale=" + LanguageStr : "");
}
public GeoCoderStatusCode GetPlacemarks(PointLatLng location, out List <Placemark> placemarkList)
{
placemarkList = this.GetPlacemarksByLocation(location);
return(GeoCoderStatusCode.G_GEO_SUCCESS);
}
public Location(string title, PointLatLng point) : base(title)
{
Point = point;
}
public GeoCoderStatusCode GetPlacemarks(PointLatLng location, out List<Placemark> placemarkList)
{
// http://msdn.microsoft.com/en-us/library/ff701713.aspx
throw new NotImplementedException();
}
public GMapRoute GetRoute(PointLatLng start, PointLatLng end, string cityName)
{
List <PointLatLng> points = new List <PointLatLng>();
string origin = string.Format("{0},{1}", start.Lng, start.Lat);
string destination = string.Format("{0},{1}", end.Lng, end.Lat);
string city = HttpUtility.UrlEncode(cityName);
string url = string.Format("http://restapi.amap.com/v3/direction/transit/integrated?origin={0}&destination={1}&city={2}&output=json&key={3}", origin, destination, city, KEY);
string result = HttpUtil.GetData(url);
if (!string.IsNullOrEmpty(result))
{
JObject resJosn = JObject.Parse(result);
string isOk = resJosn["info"].ToString();
if (isOk == "OK")
{
JObject route = (JObject)resJosn["route"];
string ori = route["origin"].ToString();
string des = route["destination"].ToString();
string distance = route["distance"].ToString();
JObject transit = (JObject)route["transits"][0]; //公交换乘方案
JArray segments = (JArray)transit["segments"]; //换乘路段列表
JObject firstSeg = (JObject)segments[0];
JObject walk = (JObject)firstSeg["walking"];
if (walk != null)
{
JArray steps = (JArray)walk["steps"];
foreach (JObject step in steps)
{
string polyline = step["polyline"].ToString();
string[] pointsString = polyline.Split(';');
foreach (string pStr in pointsString)
{
string[] pointStr = pStr.Split(',');
PointLatLng p = new PointLatLng(double.Parse(pointStr[1]), double.Parse(pointStr[0]));
points.Add(p);
}
}
}
JObject bus = (JObject)firstSeg["bus"];
if (bus != null)
{
JArray steps = (JArray)bus["buslines"];
//foreach (JObject step in steps)
if (steps != null && steps.Count > 0)
{
JObject step = (JObject)steps[0];
string polyline = step["polyline"].ToString();
string[] pointsStr = polyline.Split(';');
foreach (string pStr in pointsStr)
{
string[] pointStr = pStr.Split(',');
PointLatLng p = new PointLatLng(double.Parse(pointStr[1]), double.Parse(pointStr[0]));
points.Add(p);
}
}
}
}
}
GMapRoute mapRoute = points != null ? new GMapRoute(points, "") : null;
return(mapRoute);
}
public GeoCoderStatusCode GetPlacemarks(PointLatLng location, out List<Placemark> placemarkList)
{
// http://where.yahooapis.com/geocode?q=54.689850,25.269260&appid=1234&flags=G&gflags=QRL&locale=LT-lt
#region -- response --
//<ResultSet version="1.0"><Error>0</Error><ErrorMessage>No error</ErrorMessage><Locale>LT-lt</Locale><Quality>99</Quality><Found>1</Found><Result><quality>99</quality><latitude>54.689850</latitude><longitude>25.269260</longitude><offsetlat>54.689850</offsetlat><offsetlon>25.269260</offsetlon><radius>500</radius><name>54.689850,25.269260</name><line1>2 J. Tumo-Vaizganto Gatve</line1><line2>01108 Naujamiestis</line2><line3/><line4>Lietuvos Respublika</line4><house>2</house><street>J. Tumo-Vaizganto Gatve</street><xstreet/><unittype/><unit/><postal>01108</postal><level4>Naujamiestis</level4><level3>Vilnius</level3><level2>Vilniaus Miesto Savivaldybe</level2><level1>Vilniaus Apskritis</level1><level0>Lietuvos Respublika</level0><level0code>LT</level0code><level1code/><level2code/><hash/><woeid>12758362</woeid><woetype>11</woetype><uzip>01108</uzip></Result></ResultSet>
#endregion
return GetPlacemarksFromReverseGeocoderUrl(MakeReverseGeocoderUrl(location), out placemarkList);
}
// 区别飞行器是正常机、凸显机还是中心机；记录轨迹点
private void flyTimer_Tick(object sender, EventArgs e)
{
if (dataSource.Count == 0)
{
return;
}
Cat021Data tmpData = dataSource.GetData();
int isCheckedPlane = 0; // 0-普通飞行器，1-凸显飞行器，2-中心机,3-告警机器
// 获取中心机
String my_sAddress = ConfigHelper.Instance.GetConfig("my_sAddress");
int iAddress = Convert.ToInt32(my_sAddress);
if (!string.IsNullOrWhiteSpace(my_sAddress) && tmpData.sModeAddress == iAddress)
{
isCheckedPlane = 1;
initCenterPlane(tmpData);
}
PointLatLng pointLatLng = new PointLatLng(tmpData.latitude, tmpData.longtitude);
// 看飞机是否在凸显列表中
if (1 != isCheckedPlane)
{
if (listAirplaneCheck.ContainsKey(tmpData.sModeAddress))
{
isCheckedPlane = 2;
if (pointPlaneLand.ContainsKey(tmpData.sModeAddress))
{
pointPlaneLand.Remove(tmpData.sModeAddress);
}
pointPlaneLand.Add(tmpData.sModeAddress, pointLatLng);
}
if (AirplaneManager.Instance.checkAlermPlane(tmpData.sModeAddress))
{
isCheckedPlane = 3;
}
}
GMapAirPlane tmpAirplane = new GMapAirPlane(new PointLatLng(tmpData.latitude, tmpData.longtitude), tmpData, isCheckedPlane);
int sModeAddress = tmpData.sModeAddress;
// 轨迹点处理
List <PointLatLng> points;
if (keyValuePairs.ContainsKey(sModeAddress))
{
points = keyValuePairs[sModeAddress];
showValue[sModeAddress] = showValue[sModeAddress] + 1;
if (29 == showValue[sModeAddress])
{
pointMax(points);
}
points.Add(pointLatLng);
}
else
{
points = new List <PointLatLng>(showPointMax);
points.Add(pointLatLng);
keyValuePairs.Add(sModeAddress, points);
showValue[sModeAddress] = 0;
}
// 同一架飞机来了新的先从list里面移除掉
if (listAirplane.ContainsKey(sModeAddress))
{
listAirplane.Remove(sModeAddress);
//showAllPalne();
//planeOverlay.Markers.Remove(tmpAirplane);
}
else
{
listAirplane.Add(sModeAddress, tmpAirplane);
}
//showOnePlane(tmpAirplane);
AirplaneManager.Instance.Add(tmpData);
/*
*
*
* // 全部飞机展示
* if (airPlaneShow)
* {
* showAllPalne();
* }
*
* // 展示关注飞机与指定地面站的虚线距离
* showLandStation();
*
* gMapControl1.Refresh();
*/
}
public GMapMarkerCondominioLarge(PointLatLng p) : base(p)
{
Size = new System.Drawing.Size(global::Gipasoft.Stabili.UI.GeoLocation.Properties.Resources.stabile_large.Width, global::Gipasoft.Stabili.UI.GeoLocation.Properties.Resources.stabile_large.Height);
Offset = new System.Drawing.Point(-10, -34);
}
void MainMap_MouseLeftButtonDown(object sender, System.Windows.Input.MouseButtonEventArgs e)
{
System.Windows.Point p = e.GetPosition(MainMap);
currentMarker.Position = MainMap.FromLocalToLatLng((int)p.X, (int)p.Y);
currentposition = currentMarker.Position;
}
public DirectionsStatusCode GetDirections(out GDirections direction, PointLatLng start, IEnumerable<PointLatLng> wayPoints, bool avoidHighways, bool avoidTolls, bool walkingMode, bool sensor, bool metric)
{
return GetDirectionsUrl(MakeDirectionsUrl(start, wayPoints, LanguageStr, avoidHighways, avoidTolls, walkingMode, sensor, metric), out direction);
}
// sets route start
private void button11_Click(object sender, RoutedEventArgs e)
{
start = currentMarker.Position;
}
string MakeDirectionsUrl(PointLatLng start, IEnumerable<PointLatLng> wayPoints, string language, bool avoidHighways, bool avoidTolls, bool walkingMode, bool sensor, bool metric)
{
string av = (avoidHighways ? "&avoid=highways" : string.Empty) + (avoidTolls ? "&avoid=tolls" : string.Empty); // 6
string mt = "&units=" + (metric ? "metric" : "imperial"); // 7
string wk = "&mode=" + (walkingMode ? "walking" : "driving"); // 8
string wpLatLng = string.Empty;
int i = 0;
foreach (var wp in wayPoints)
{
wpLatLng += string.Format(CultureInfo.InvariantCulture, i++ == 0 ? "{0},{1}" : "|{0},{1}", wp.Lat, wp.Lng);
}
return string.Format(CultureInfo.InvariantCulture, DirectionUrlFormatWaypoint, start.Lat, start.Lng, wpLatLng, sensor.ToString().ToLower(), language, av, mt, wk, ServerAPIs);
}
// sets route end
private void btnEndRoute_Click(object sender, RoutedEventArgs e)
{
end = currentMarker.Position;
}
string MakeRouteUrl(PointLatLng start, PointLatLng end, string language, bool avoidHighways, bool walkingMode)
{
string opt = walkingMode ? WalkingStr : (avoidHighways ? RouteWithoutHighwaysStr : RouteStr);
return string.Format(CultureInfo.InvariantCulture, RouteUrlFormatPointLatLng, language, opt, start.Lat, start.Lng, end.Lat, end.Lng, Server);
}
/// <summary>
/// 添加点图元
/// </summary>
/// <param name="kml">kml对象</param>
/// <param name="gmapOverlay">图层</param>
/// <returns></returns>
public IMFElement CreateElement(Kml kml, GMapOverlay gmapOverlay)
{
KmlPoint point = kml.Placemark.Graph as KmlPoint;
if (point == null)
{
return(null);
}
if (point.Position == null)
{
return(null);
}
PointLatLng p = new PointLatLng(point.Position.Lat, point.Position.Lng, point.Position.Alt);
IMFElement element = null;
// 位置和图标
Point_GMap pointElement = new Point_GMap(p, point, kml.Placemark.Name);
// 大小
pointElement.Size = new Size(pointElement.Size.Width, pointElement.Size.Height);
// Tip
if (!string.IsNullOrEmpty(point.TipText))
{
pointElement.ToolTipText = point.TipText;
pointElement.ToolTipMode = MarkerTooltipMode.OnMouseOver;
pointElement.ToolTip.Format.Alignment = System.Drawing.StringAlignment.Near; // Tip文字左对齐
}
element = pointElement;
//if (string.IsNullOrEmpty(point.IcoUrl))//纯点
//{
// // 位置和图标
// Point_GMap pointElement = new Point_GMap(p, point, kml.Placemark.Name);
// // 大小
// pointElement.Size = new Size(pointElement.Size.Width, pointElement.Size.Height);
// // Tip
// if (!string.IsNullOrEmpty(point.TipText))
// {
// pointElement.ToolTipText = point.TipText;
// pointElement.ToolTipMode = MarkerTooltipMode.OnMouseOver;
// pointElement.ToolTip.Format.Alignment = System.Drawing.StringAlignment.Near; // Tip文字左对齐
// }
// element = pointElement;
//}
//else //目标点
//{
// Picture_GMap moveObj = new Picture_GMap(p, point, kml.Placemark.Name);
// // Tip
// if (!string.IsNullOrEmpty(point.TipText))
// {
// moveObj.ToolTipText = point.TipText;
// moveObj.ToolTipMode = MarkerTooltipMode.OnMouseOver;
// moveObj.ToolTip.Format.Alignment = System.Drawing.StringAlignment.Near; // Tip文字左对齐
// }
// // 设置图元的类型
// moveObj.ElementType = ElementTypeEnum.Point;
// // 设置图元的描述信息
// moveObj.Description = point.Description;
// // 鼠标经过可见
// moveObj.IsHitTestVisible = true;
// element = moveObj;
//}
// 添加图元到图层
if (gmapOverlay.Control.InvokeRequired)
{
gmapOverlay.Control.BeginInvoke(new Action(delegate
{
gmapOverlay.Markers.Add((element as GMapMarker));
}));
}
else
{
gmapOverlay.Markers.Add((element as GMapMarker));
}
return(element);
}
public Placemark? GetPlacemark(PointLatLng location, out GeoCoderStatusCode status)
{
List<Placemark> pointList;
status = GetPlacemarks(location, out pointList);
return pointList != null && pointList.Count > 0 ? pointList [0] : (Placemark?)null;
}
string MakeRoutingUrl(PointLatLng start, PointLatLng end, string travelType, bool withInstructions = false)
{
return(string.Format(CultureInfo.InvariantCulture, RoutingUrlFormat, start.Lat, start.Lng, end.Lat, end.Lng, travelType, withInstructions ? "1" : "0", LanguageStr));
}
/// <summary>
/// sets zoom to max to fit rect
/// </summary>
/// <param name="rect"></param>
/// <returns></returns>
public bool SetZoomToFitRect(RectLatLng rect)
{
int mmaxZoom = GetMaxZoomToFitRect(rect);
if(mmaxZoom > 0)
{
PointLatLng center = new PointLatLng(rect.Lat - (rect.HeightLat / 2), rect.Lng + (rect.WidthLng / 2));
Position = center;
if(mmaxZoom > maxZoom)
{
mmaxZoom = maxZoom;
}
if(Zoom != mmaxZoom)
{
Zoom = (int)mmaxZoom;
}
return true;
}
return false;
}
public GeoCoderStatusCode GetPlacemarks(PointLatLng location, out List <Placemark> placemarkList)
{
// http://msdn.microsoft.com/en-us/library/ff701713.aspx
throw new NotImplementedException();
}
//if count of buoy less then 3, return false and do nothing
public bool Valid(ref PointLatLng center)
{
if (Buoys.Count < 3)
{
return(false);
}
var sorttable = new Hashtable();
DateTime t = DateTime.Today;
for (int i = Buoys.Count - 1; i >= 0; i--)
{
if (sorttable.ContainsKey(Buoys.Values[i].Time))
{
int n = (int)sorttable[Buoys.Values[i].Time];
sorttable[Buoys.Values[i].Time] = n + 1;
if (n + 1 >= 3)
{
t = Buoys.Values[i].Time;//most
}
}
else
{
sorttable.Add(Buoys.Values[i].Time, 1);
}
}
if (!sorttable.ContainsValue(3) && !sorttable.ContainsValue(4))
{
return(false);
}
if (sorttable.ContainsValue(3) && Buoys.Count == 4)
{
//remove unused buoy
for (int i = Buoys.Count - 1; i >= 0; i--)
{
if (Buoys.Values[i].Time != t)
{
Buoys.RemoveAt(i);
break;
}
}
}
//find latest 3 data
if (Buoys.Count == 4 && UseMatrix)
{
int indexOld = 1;
DateTime oldtime = Buoys[indexOld].Time;
for (int i = 1; i <= Buoys.Count; i++)
{
if (Buoys[i].Time < oldtime)
{
oldtime = Buoys[i].Time;
indexOld = i;
}
}
Buoys.Remove(indexOld);
}
center = new PointLatLng((Buoys.Values[0].Lat + Buoys.Values[1].Lat + Buoys.Values[2].Lat) / 3,
(Buoys.Values[0].Lng + Buoys.Values[1].Lng + Buoys.Values[2].Lng) / 3);
//used for matrix
if (UseMatrix)
{
var buoy1 = new PointLatLng(Buoys.Values[0].Lat, Buoys.Values[0].Lng);
Utility.Util.GetReltXY(buoy1, center, out x1, out y1);
z1 = 0;
var buoy2 = new PointLatLng(Buoys.Values[1].Lat, Buoys.Values[1].Lng);
Utility.Util.GetReltXY(buoy2, center, out x2, out y2);
z2 = 0;
var buoy3 = new PointLatLng(Buoys.Values[2].Lat, Buoys.Values[2].Lng);
Utility.Util.GetReltXY(buoy3, center, out x3, out y3);
z3 = 0;
range1 = Buoys.Values[0].Range;
range2 = Buoys.Values[1].Range;
range3 = Buoys.Values[2].Range;
}
else//used for Approach /km
{
geoCoordinate1[0] = Buoys.Values[0].Lat;
geoCoordinate1[1] = Buoys.Values[0].Lng;
geoCoordinate1[2] = earthRadius - SonarDepth;
geoCoordinate2[0] = Buoys.Values[1].Lat;
geoCoordinate2[1] = Buoys.Values[1].Lng;
geoCoordinate2[2] = earthRadius - SonarDepth;
geoCoordinate3[0] = Buoys.Values[2].Lat;
geoCoordinate3[1] = Buoys.Values[2].Lng;
geoCoordinate3[2] = earthRadius - SonarDepth;
distanceBuoy[0] = Buoys.Values[0].Range / 1000;
distanceBuoy[1] = Buoys.Values[1].Range / 1000;
distanceBuoy[2] = Buoys.Values[2].Range / 1000;
if (Buoys.Count == 4)
{
geoCoordinate4[0] = Buoys.Values[3].Lat;
geoCoordinate4[1] = Buoys.Values[3].Lng;
geoCoordinate4[2] = earthRadius - SonarDepth;
distanceBuoy[3] = Buoys.Values[3].Range / 1000;
}
}
Buoys.Clear();
return(true);
}
public Flight(int CAT, string ACID, string ADDRESS, TimeSpan time, string coordinates, double lat, double lon, int realindex, PointLatLng punto)
{
this.CAT = CAT;
this.ACID = ACID;
this.ADDRESS = ADDRESS;
this.time = time;
this.coordinates = coordinates;
this.lat = lat;
this.lon = lon;
this.realindex = realindex;
this.punto = punto;
}