protected void Page_Load(object sender, EventArgs e)
{
JsonArray json = new JsonArray();
Msg msg = PlanStatusModel.GetUnFillPlans();//获取未完成的项目
if (msg.Status)
{
List <Tbl_Plan> list = msg.UserData as List <Tbl_Plan>;
GsonHelper gson = new GsonHelper();
for (int i = 0; i < list.Count; i++)
{
RetMsg ret = new RetMsg();
ret.planId = list[i].PlanID;
ret.Time = list[i].PlanDate.ToString();
ret.ProjectName = list[i].ProjectName;
json.Add(JsonValue.Parse(gson.GetSerializerString(ret)));
}
}
this.Response.Write(json.ToString());
}
private List <PlanStatus> getData()
{
StringBuilder oBuild = new StringBuilder();
Msg msg = PlanStatusModel.GetUnFillPlans();//获取未完成的项目
List <PlanStatus> list = new List <PlanStatus>();
if (msg.Status)
{
List <Tbl_Plan> lPlans = msg.UserData as List <Tbl_Plan>;//项目署
for (int i = 0; i < lPlans.Count; i++)
{
PlanStatus status = new PlanStatus();
status.PlanName = lPlans[i].ProjectName;
status.PlanAdm = "已确认";
status.Design = "已确认";
int PlanCount = PlanStatusModel.NGetMateriesCountById(lPlans[i].PlanID);//获取项目的数量
if (PlanCount != 0)
{
List <Tbl_ProductStorage> lProduct = PlanStatusModel.GetPlanPercentById(lPlans[i].PlanID, (int)TableType.加工中心).UserData as List <Tbl_ProductStorage>;
List <Tbl_CenterStorage> lCenter = PlanStatusModel.GetPlanPercentById(lPlans[i].PlanID, (int)TableType.中心仓储).UserData as List <Tbl_CenterStorage>;
List <Tbl_SiteStorage> lSite = PlanStatusModel.GetPlanPercentById(lPlans[i].PlanID, (int)TableType.现场仓储).UserData as List <Tbl_SiteStorage>;
int iPCount = 0;
int iCCount = 0;
int iSCount = 0;
foreach (Tbl_ProductStorage oPro in lProduct)
{
iPCount += oPro.InCount == null ? 0 : (int)oPro.InCount;
}
foreach (Tbl_CenterStorage oPro in lCenter)
{
iCCount += oPro.InCount == null ? 0 : (int)oPro.InCount;
}
foreach (Tbl_SiteStorage oPro in lSite)
{
iSCount += oPro.InCount == null ? 0 : (int)oPro.InCount;
}
string sProduct = (((float)iPCount / PlanCount) * 100).ToString();
string sCenter = (((float)iCCount / PlanCount) * 100).ToString();
string sSite = (((float)iSCount / PlanCount) * 100).ToString();
if (iPCount == 0)
{
status.Produnt = "加工中心已完成: " + sProduct + "%";
// oBuild.Append("<spam>项目:" + lPlans[i].PlanID + "></span><span >项目主管确定-></span><span >设计主管确定-></span><span >加工中心已完成: " + sProduct + "%-></span>");
}
else if (iCCount == 0)
{
status.Produnt = "加工中心已完成: " + sProduct + "%";
status.Center = "中心仓储已完成: " + sCenter + "%";
}
// oBuild.Append("<spam>项目:" + lPlans[i].PlanID + "></span><span >项目主管确定-></span><span >设计主管确定-></span><span>加工中心已完成: " + sProduct + "%-></span> <span>中心仓储已完成: " + sCenter + "%-></span>");
else if (iSCount == 0)
{
status.Produnt = "加工中心已完成: " + sProduct + "%";
status.Center = "中心仓储已完成: " + sCenter + "%";
status.Site = "现场仓储已完成: " + sSite + "%";
}
else
{
}
}
else
{
status.Produnt = "加工中心已完成: " + 0 + "%";
status.Center = "中心仓储已完成: " + 0 + "%";
status.Site = "现场仓储已完成: " + 0 + "%";
}
list.Add(status);
}
}
return(list);
}
protected void Page_Load(object sender, EventArgs e)
{
StringBuilder oBuild = new StringBuilder();
Msg msg = PlanStatusModel.GetUnFillPlans();//获取未完成的项目
if (msg.Status)
{
List <Tbl_Plan> lPlans = msg.UserData as List <Tbl_Plan>;//项目署
for (int i = 0; i < lPlans.Count; i++)
{
oBuild.Append("<li>");
if (lPlans[i].DesignAdmStatus == 128) //如果设计主管已确认
{
int PlanCount = PlanStatusModel.GetMateriesById(lPlans[i].PlanID); //获取项目的数量
List <Tbl_ProductStorage> lProduct = PlanStatusModel.GetPlanPercentById(lPlans[i].PlanID, (int)TableType.加工中心).UserData as List <Tbl_ProductStorage>;
List <Tbl_CenterStorage> lCenter = PlanStatusModel.GetPlanPercentById(lPlans[i].PlanID, (int)TableType.中心仓储).UserData as List <Tbl_CenterStorage>;
List <Tbl_SiteStorage> lSite = PlanStatusModel.GetPlanPercentById(lPlans[i].PlanID, (int)TableType.现场仓储).UserData as List <Tbl_SiteStorage>;
int iPCount = 0;
int iCCount = 0;
int iSCount = 0;
foreach (Tbl_ProductStorage oPro in lProduct)
{
iPCount += oPro.InCount == null?0:(int)oPro.InCount;
}
foreach (Tbl_CenterStorage oPro in lCenter)
{
iCCount += oPro.InCount == null ? 0 : (int)oPro.InCount;
}
foreach (Tbl_SiteStorage oPro in lSite)
{
iSCount += oPro.InCount == null ? 0 : (int)oPro.InCount;
}
string sProduct = (((float)iPCount / PlanCount) * 100).ToString();
string sCenter = (((float)iCCount / PlanCount) * 100).ToString();
string sSite = (((float)iSCount / PlanCount) * 100).ToString();
if (iPCount == 0)
{
oBuild.Append("<spam>项目:" + lPlans[i].PlanID + "></span><span >项目主管确定-></span><span >设计主管确定-></span><span >加工中心已完成: " + sProduct + "%-></span>");
}
else if (iCCount == 0)
{
oBuild.Append("<spam>项目:" + lPlans[i].PlanID + "></span><span >项目主管确定-></span><span >设计主管确定-></span><span>加工中心已完成: " + sProduct + "%-></span> <span>中心仓储已完成: " + sCenter + "%-></span>");
}
else if (iSCount == 0)
{
oBuild.Append("<spam>项目:" + lPlans[i].PlanID + "></span><span >项目主管确定-></span><span >设计主管确定-></span><span>加工中心已完成: " + sProduct + "%-></span> <span>中心仓储已完成: " + sCenter + "%-></span><span>现场仓储已完成: " + sSite + "%-></span>");
}
else
{
}
}
else if (lPlans[i].PlanAdmStatus == 128)//设计主管确定
{
oBuild.Append("<spam>项目:" + lPlans[i].PlanID + "></span><span>项目主管确定-></span><span style='color:Orange'>设计主管确定</span>");
}
else //项目主管确定
{
oBuild.Append("<spam>项目:" + lPlans[i].PlanID + "></span><span style='color:Orange'>项目主管确定</span>");
}
oBuild.Append("</li>");
}
}
planStatus.InnerHtml = oBuild.ToString();
}
