/// <summary>
/// Writes the testbench code that instantiates the module and writes out the
/// inputs and outputs
/// </summary>
/// <param name="dir">String containing directory path of where the circuit should
/// be saved</param>
/// <returns>int containing the required width of the testvectors</returns>
private int instantiate(String dir)
{
//Sets the file writer to append mode
FileStream fs = new FileStream(dir + "\\test.v", FileMode.Append, FileAccess.Write);
TextWriter tw = new StreamWriter(fs);
//puts the inputs into a temp value so that once the clock is removed, it doesn't
//remove it from the class object
PinList tempInputs = new PinList();
tempInputs.AddRange(inputs.Pins);
tw.Write("module test; \n\n\t//inputs\n");
int i = 0;
//Gets the name of the clock variable
Pin clkVar = tempInputs.clk_var();
//Console.WriteLine(clkVar);
//Removes the clock variable from the inputs and insizes
tempInputs.clk_rm(clkVar);
tw.Write("\treg " + clkVar.PinName + ";\n");
//Writes out the module inputs
foreach (Pin datain in tempInputs.Pins)
{
if (datain.bussize > 1)
{
tw.Write("\treg [");
tw.Write(datain.bussize - 1);
tw.Write(":0] " + datain.PinName + ";\n");
}
else
{
tw.Write("\treg " + datain.PinName + ";\n");
}
}
tw.Write("\n\t//expected results\n");
//Writes the expected module outputs
foreach (Pin dataout in outputs.Pins)
{
if (dataout.bussize > 1)
{
tw.Write("\treg [");
tw.Write(dataout.bussize - 1);
tw.Write(":0] " + dataout.PinName + "Expected;\n");
}
else
{
tw.Write("\treg " + dataout.PinName + "Expected;\n");
}
}
tw.Write("\n\t//outputs\n");
//Writes the module outputs
foreach (Pin dataout in outputs.Pins)
{
if (dataout.bussize > 1)
{
tw.Write("\twire [");
tw.Write(dataout.bussize - 1);
tw.Write(":0] " + dataout.PinName + ";\n");
}
else
{
tw.Write("\twire " + dataout.PinName + ";\n");
}
}
tw.Write("\tinteger error, ch;");
int tv_count = 0;
//Adds the bus sizes of each input and output to generate the width of the
//expected test vectors
foreach (Pin instance in tempInputs.Pins)
{
tv_count += instance.bussize;
}
foreach (Pin instance in outputs.Pins)
{
tv_count += instance.bussize;
}
tw.Write("\n\n\n\treg[31:0] vectornum, errors;\n");
tw.Write("\n\treg[" + (tv_count - 1) + ":0] testvectors[10000:0];\n");
tw.Write("\n\t//Instantiate the Unit Under Test (UUT)\n\t"
+ moduleName + " uut(\n");
i = 0;
//System.Windows.Forms.MessageBox.Show(clkVar.PinName + !clkVar.PinName.Equals("auto_clk"));
//Lists the inputs and outputs for module instantiation
if (!clkVar.PinName.Equals("auto_clock"))
{
tw.Write("\t\t." + clkVar.PinName + "(" + clkVar.PinName + ")");
}
foreach (Pin datain in tempInputs.Pins)
{
if ((clkVar.PinName.Equals("auto_clock")) && (i == 0))
{
tw.Write("\t\t." + datain.PinName + "(" + datain.PinName + ")");
}
else
{
tw.Write(",\n\t\t." + datain.PinName + "(" + datain.PinName + ")");
}
i++;
}
foreach (Pin dataout in outputs.Pins)
{
tw.Write(",\n\t\t." + dataout.PinName + "(" + dataout.PinName + ")");
}
tw.Close();
fs.Close();
return(tv_count);
}
/// <summary>
/// Writes the initialization code for reading in the test vectors
/// </summary>
/// <param name="dir">String containing directory path of where the circuit should
/// be saved</param>
private void initTest(String dir)
{
//Sets the file writer to append mode
FileStream fs = new FileStream(dir + "\\test.v", FileMode.Append, FileAccess.Write);
TextWriter tw = new StreamWriter(fs);
int i;
PinList tempInputs = new PinList();
tempInputs.AddRange(inputs.Pins);
Pin clkVar = tempInputs.clk_var();
tempInputs.clk_rm(clkVar);
tw.Write("\n\t);\n\n");
tw.Write("\talways\n\t\tbegin\n\t\t\t" +
clkVar.PinName + "=1; #5; " + clkVar.PinName + "=0; #5;\n\t\tend\n");
tw.Write("\n\tinitial\n\t\tbegin\n" +
"\t\t\terror = $fopen(\"error.log\");\n" +
"\t\t\tif(error==0) $stop(2);\n" +
"\t\t\tch = error|1;\n" +
"\t\t\t$readmemb(\"testVect.tv\", testvectors);\n" +
"\t\t\tvectornum=0; errors=0;\n\t\tend\n");
tw.Write("\n\talways @ (posedge " + clkVar.PinName + ")\n\t\tbegin\n" +
"\t\t\t#1; {");
i = 0;
//Writes out the inputs for testvector assignment
foreach (Pin datain in tempInputs.Pins)
{
if (datain.bussize > 1)
{
if (i == 0)
{
tw.Write(datain.PinName + "[" +
(datain.bussize - 1) + ":0]");
}
else
{
tw.Write(", " + datain.PinName + "[" +
(datain.bussize - 1) + ":0]");
}
}
else
{
if (i == 0)
{
tw.Write(datain.PinName);
}
else
{
tw.Write(", " + datain.PinName);
}
}
i++;
}
//Writes out the expected outputs for testvector assignment
foreach (Pin dataout in outputs.Pins)
{
if (dataout.bussize > 1)
{
tw.Write(", " + dataout.PinName + "Expected[" +
(dataout.bussize - 1) + ":0]");
}
else
{
tw.Write(", " + dataout.PinName + "Expected");
}
}
tw.Write("}=\n\t\t\ttestvectors[vectornum];\n\t\tend\n");
tw.Write("\n\talways @ (negedge " + clkVar.PinName + ")\n\t\tbegin\n");
tw.Close();
fs.Close();
}
/// <summary>
/// Method compares inputs and outputs generated by the circuit and truthtable
/// recognizers, attempts to reconcile the order and generated an appropriate
/// Verilog testbench
/// </summary>
/// <param name="tv">List of Pins containing circuit input/outputs recognized
/// by the truthtable recognizer</param>
/// <param name="circ">List of superwires contained in the CircuitRec object</param>
/// <returns>List of pins containing the correct pin order</param>
/// <param name="filename">Name of the xml/verilog file that contains the
/// circuit whose inputs/outputs are to be rectified</param>
/// <returns>List of pins containing the correct pin order</returns>
public List <Pin> inOutRectify(List <Pin> tv, List <Mesh> circ, String filename)
{
//get the input/output pins from circuitrec
PinList synthPins = new PinList(MeshToPins(circ));
//initialize output list
List <Pin> order = new List <Pin>();
Pin clkPin;
String dir = Path.GetDirectoryName(filename);
String module = Path.GetFileNameWithoutExtension(filename);
int i = 0;
//Get the clock variable
clkPin = synthPins.clk_var();
//Remove the clock variable from synthPins
synthPins.clk_rm(clkPin);
//foreach (Pin instance in synthPins.Pins)
//{
// Console.WriteLine(instance.PinName + " " + instance.bussize);
//}
order.Add(clkPin);
//If there is a mismatch between number of inputs/outputs
//return an error
if (tv.Count != synthPins.Count)
{
MessageBox.Show("Mismatch between number of truth table and circuit inputs/outputs", "In/Out Mismatch", MessageBoxButtons.OK, MessageBoxIcon.Error);
return(null);
}
int flipped = 0;
//Looks for each pin that exists in the testvector file in the circuit
//if it exists in the circuit, it is added to this list of pin outputs
foreach (Pin instance in tv)
{
i = indexFind(synthPins.Pins, instance);
if (i < synthPins.Pins.Count)
{
if (instance.Polarity.Equals(synthPins.Pins[i].Polarity))
{
//if the pins have the same input/output type, add it to the
//return list and remove it from synthpins
order.Add(instance);
synthPins.RemoveAt(i);
}
else
{
flipped++;
}
}
}
//if all inputs/outputs match except every input/output has the wrong
//polarity, return an error
if (flipped == synthPins.Count)
{
MessageBox.Show("Truthtable inputs/outputs appear to have been flipped", "Input/Output Mismatch", MessageBoxButtons.OK, MessageBoxIcon.Error);
return(null);
}
//if some inputs/outputs could not be matched up, return an error
if (synthPins.Pins.Count > 0)
{
//MessageBox.Show("here");
//foreach (Pin instance in synthPins.Pins)
//{
// Console.WriteLine(instance.PinName + " " + instance.bussize);
//}
//MessageBox.Show("there");
MessageBox.Show("Input/Output lists could not be rectified", "Input/Output Mismatch", MessageBoxButtons.OK, MessageBoxIcon.Error);
return(null);
}
Module mod = new Module("testBench");
//write out a testbench with inputs/outputs in the appropriate order
TestBenchWriter tbw = new TestBenchWriter(dir, pins2mod(order, module));
tbw.writeBench();
return(order);
}