private void timer1_Tick(object sender, EventArgs e)
{
float t1 = PCAS.get_box_temperature();
float t2 = PCAS.get_chip_temperature();
float m1 = PCAS.get_box_moisture();
float m2 = PCAS.get_chip_moisture();
if (t1 != float.NaN)
{
temperature1.Text = t1.ToString("0.00");
}
if (t2 != float.NaN)
{
temperature0.Text = t2.ToString("0.00");
}
if (m1 != float.NaN)
{
moisture1.Text = m1.ToString("0.00");
}
if (m2 != float.NaN && m2 > 0 && m2 < 100)
{
moisture0.Text = m2.ToString("0.00");
}
logtext.Text = PCAS.get_log();
logtext.Select(logtext.TextLength, 0); //光标定位到文本最后
logtext.ScrollToCaret(); //滚动到光标处
}
private void exam_Click(object sender, EventArgs e)
{
uint i = uint.Parse(sampleid.Text);
uint sample = uint.Parse(Sample.Text);
float d = float.Parse(sample_radius.Text);
float a = float.Parse(angle.Text);
if (i > sample)
{
MessageBox.Show("请输入正确的样本编号");
return;
}
if (a > 360 || a < -360)
{
MessageBox.Show("请输入正确的角偏移");
return;
}
if (d < 0 || d > 30)
{
MessageBox.Show("请输入正确的半径");
return;
}
PCAS.set_radius(d);
PCAS.set_angle(a);
PCAS.set_sample(sample);
PCAS.move_to_sample(i);
}
private void original_Click(object sender, EventArgs e)
{
checkBox0.Checked = false;
checkBox1.Checked = false;
checkBox2.Checked = false;
checkBox3.Checked = false;
PCAS.set_ref(4);
}
private void LED_light_ValueChanged(object sender, EventArgs e)
{
uint i = decimal.ToUInt32(LED_light.Value);
if (i > 100)
{
MessageBox.Show("请输入正确的亮度比列");
return;
}
PCAS.set_led(i);
}
private void sample_exam_thread()
{
string strReadLine;
string regexStr = @"[-+]?\b(?:[0-9]*\.)*[0-9]+\b";
MatchCollection mc;
uint i = 1;
PCAS.set_radius(d);
PCAS.set_angle(a);
PCAS.set_sample(sample);
while (i < sample)
{
if (cycle == true)
{
PCAS.move_to_sample(i);
}
else
{
if (i > x.Count - 1)
{
break;
}
PCAS.microscopexy(x[(int)i], y[(int)i]);
}
this.set_sampleid(i.ToString());
Thread.Sleep(100);
picture.Record_the_picture(i);
Thread.Sleep(100);
if (reportfile != null)
{
strReadLine = reportfile.ReadLine(); //读取每行数据
//while (!reportfile.EndOfStream)
// strReadLine = reportfile.ReadLine(); //读取每行数据
if (strReadLine != null)
{
mc = Regex.Matches(strReadLine, regexStr);
if (mc.Count >= 9)
{
dataGridView1[3, (int)i - 1].Value = mc[7].Value;
}
}
}
if (exam_start == false)
{
return;
}
Thread.Sleep(time);
i++;
}
exam_start = false;
set_exam("检测");
}
private void ypp_thread()
{
int i = 0;
while (true)
{
PCAS.micoscope_y(100);
i++;
Thread.Sleep(100);
if (ypp_stop == true)
{
return;
}
}
}
private void zmm_thread()
{
int i = 0;
while (true)
{
PCAS.micoscope_z(-100);
i++;
Thread.Sleep(100);
if (zmm_stop == true)
{
return;
}
}
}
private void button5_Click(object sender, EventArgs e)
{
int i = int.Parse(textBox2.Text);
if (i == 0)
{
PCAS.microscopexy(0, 0);
return;
}
i = i - 1;
if (i > x.Count)
{
return;
}
PCAS.microscopexy(x[i], y[i]);
}
private void dataGridView1_CellContentClick(object sender, DataGridViewCellEventArgs e)
{
uint uL;
uint sampleid;
if (e.RowIndex < 0 || e.ColumnIndex < 1)
{
return;
}
if (this.dataGridView1.Rows[e.RowIndex].Cells[e.ColumnIndex - 1].Value != null)
{
uL = uint.Parse(this.dataGridView1.Rows[e.RowIndex].Cells[e.ColumnIndex - 1].Value.ToString());
sampleid = (uint)e.RowIndex + 1;
PCAS.set_hole_uL(uL);
PCAS.move_to_hole(sampleid);
}
}
private void set_Click(object sender, EventArgs e)
{
float target_temp = float.Parse(targettemp.Text);
float target_moist = float.Parse(targetmoist.Text);
if (target_temp > 30 || target_temp < 0)
{
MessageBox.Show("请输入正确的温度");
return;
}
if (target_moist > 100 || target_moist < 0)
{
MessageBox.Show("请输入正确的湿度");
return;
}
PCAS.set_target_temperature(target_temp);
PCAS.set_target_moisture(target_moist);
}
private void cycle_thread()
{
int angle = 0;
PCAS.micoscope_x(-r);
while (angle < 360)
{
if (cycle_start == false)
{
return;
}
if (cycle_pause == true)
{
Thread.Sleep(1);
continue;
}
PCAS.micoscope_x((int)(r - r * Math.Cos(Math.PI / 180 * angle)));
PCAS.micoscope_y((int)(r * Math.Sin(Math.PI / 180 * angle)));
angle++;
}
}
private void RemoteClose_Click(object sender, EventArgs e)
{
string username = UserName.Text;
string password = PassWords.Text;
string ipaddress = IPAddress0.Text + '.' + IPAddress1.Text + '.' + IPAddress2.Text + '.' + IPAddress3.Text;
DialogResult r;
r = MessageBox.Show("确认关机", "远程关机", MessageBoxButtons.OKCancel, MessageBoxIcon.Information, MessageBoxDefaultButton.Button2);
if (r == DialogResult.Cancel)
{
return;
}
if (PCAS.disconnect(ipaddress, username, password) == true)
{
welcome.Visible = true;// Set the welcome page as invisible
timer1.Enabled = false;
picture.Close();
}
else
{
MessageBox.Show("关机失败");
}
}
private void PreviewBox_MouseClick(object sender, MouseEventArgs e)
{
// 点击时记录坐标
int x = e.X;
int y = e.Y;
int w = PreviewBox.Width;
int h = PreviewBox.Height;
int ox = w / 2;
int oy = h / 2;
// 执行你的方法,无须模拟鼠标动作
if (m_hCamera <= 0)
{
return;//相机还未初始化，句柄无效
}
int picture_w = m_tFrameHead.iWidth;
int picture_h = m_tFrameHead.iHeight;
int delta_x = (x - ox) * 1150 / 10 / w; // 2 * 500 / 710;
int delta_y = (y - oy) * 800 / 10 / h; // 2 * 300 / 420;
PCAS.micoscope_x(delta_x);
PCAS.micoscope_y(delta_y);
}
private void addsample_Click(object sender, EventArgs e)
{
uint i = uint.Parse(holeid.Text);
uint sample = uint.Parse(Sample.Text);
float d = float.Parse(radius.Text);
float a = float.Parse(holeangle.Text);
float h_d = float.Parse(hole_off.Text);
float u = float.Parse(uL.Text);
if (i > sample)
{
MessageBox.Show("请输入正确的样本编号");
return;
}
if (a > 360 || a < -360)
{
MessageBox.Show("请输入正确的角偏移");
return;
}
if (d < 0 || d > 30)
{
MessageBox.Show("请输入正确的半径");
return;
}
if (h_d < 0 || h_d > 50)
{
MessageBox.Show("请输入正确的偏移");
return;
}
PCAS.set_hole_radius(d);
PCAS.set_hole_angle(a);
PCAS.set_hole_sample(sample);
PCAS.set_hole_delta(h_d);
PCAS.set_hole_uL(u);
PCAS.move_to_hole(i);
}
private void ConnectButton_Click(object sender, EventArgs e)
{
string username = UserName.Text;
string password = PassWords.Text;
string ipaddress = IPAddress0.Text + '.' + IPAddress1.Text + '.' + IPAddress2.Text + '.' + IPAddress3.Text;
if (PCAS.connect(ipaddress, username, password))
{
float t1 = PCAS.get_box_temperature();
float t2 = PCAS.get_chip_temperature();
float m1 = PCAS.get_box_moisture();
float m2 = PCAS.get_chip_moisture();
welcome.Visible = false;// Set the welcome page as invisible
timer1.Enabled = true;
temperature1.Text = t1.ToString();
temperature0.Text = t2.ToString();
moisture0.Text = m1.ToString();
moisture1.Text = m2.ToString();
}
else
{
MessageBox.Show("连接失败");
}
}
private void zpp_Click(object sender, EventArgs e)
{
PCAS.micoscope_z(100);
}
private void button16_Click(object sender, EventArgs e)
{
PCAS.set_view_z();
}
private void button17_Click(object sender, EventArgs e)
{
PCAS.set_hole_z();
}
private void button2_Click(object sender, EventArgs e)
{
PCAS.pannel_out();
}
private void button1_Click(object sender, EventArgs e)
{
PCAS.pannel_in();
}
private void xp_Click(object sender, EventArgs e)
{
PCAS.micoscope_x(1);
}
private void AlignmentMark3_Click(object sender, EventArgs e)
{
checkBox3.Checked = true;
PCAS.set_ref(3);
}
private void sybb_Click(object sender, EventArgs e)
{
PCAS.syringe_minus(200);
}
private void syff_Click(object sender, EventArgs e)
{
PCAS.syringe_plus(200);
}
private void xmm_Click(object sender, EventArgs e)
{
PCAS.micoscope_x(-100);
}
private void yp_Click(object sender, EventArgs e)
{
PCAS.micoscope_y(-1);
}
private void zm_Click(object sender, EventArgs e)
{
PCAS.micoscope_z(-10);
}
