/// <summary>
/// Save an element on a temporary list and override its color
/// </summary>
public static void AddToSelection(ElementId ReferenceElem, List <Element> completeList)
{
foreach (Element elem in completeList)
{
selectedElements.Add(elem);
}
selectedElements.Add(tools.doc.GetElement(ReferenceElem));
OverrideGraphicSettings overrideGraphicSettings = new OverrideGraphicSettings();
System.Drawing.Color colorSelect = MainForm.ColorSelected;
byte r = colorSelect.R;
byte b = colorSelect.B;
byte g = colorSelect.G;
//overrideGraphicSettings.SetProjectionFillColor(new Autodesk.Revit.DB.Color(r, g, b));
overrideGraphicSettings.SetProjectionLineColor(new Autodesk.Revit.DB.Color(r, g, b));
foreach (Element x in tools.selectedElements)
{
tools.doc.ActiveView.SetElementOverrides(x.Id, overrideGraphicSettings);
}
#if REVIT2020
OverrideElemtColor.Graphics20192020(doc, ref overrideGraphicSettings, r, g, b);
#elif REVIT2019
OverrideElemtColor.Graphics20172020(doc, ref overrideGraphicSettings, r, g, b);
#endif
foreach (Element x in selectedElements)
{
//Override color of element
doc.ActiveView.SetElementOverrides(x.Id, overrideGraphicSettings);
}
}
/// <summary>
/// Save an element on a temporary list and override its color
/// </summary>
public static void AddToSelection(bool duplicated)
{
selectedElements.Clear();
var filterS = new SelectionFilter();
var refElement = uidoc.Selection.PickObject(ObjectType.Element, new SelectionFilter());
if (refElement != null)
{
var element = uidoc.Document.GetElement(refElement);
if (duplicated)
{
selectedElements.AddRange(GetallElementsDuplicated(element));
}
selectedElements.Add(element);
//TODO: check if element is from the right category
OverrideGraphicSettings overrideGraphicSettings = new OverrideGraphicSettings();
Color colorSelect = MainForm.ColorSelected;
//Split coloSelect in R,G,B to be transformed to a Revit color later
byte r = colorSelect.R;
byte g = colorSelect.G;
byte b = colorSelect.B;
#if REVIT2020
OverrideElemtColor.Graphics20192020(doc, ref overrideGraphicSettings, r, g, b);
#elif REVIT2019
OverrideElemtColor.Graphics20172020(doc, ref overrideGraphicSettings, r, g, b);
#endif
foreach (Element x in selectedElements)
{
//Override color of element
doc.ActiveView.SetElementOverrides(x.Id, overrideGraphicSettings);
}
selectedElement = element;
//Add element to the temporary list of selected elemenents
ListOfElements.Add(element);
}
}
/// <summary>
/// Save an element on a temporary list and override its color
/// </summary>
public static void AddToSelection()
{
selectedElements.Clear();
var filterS = new SelectionFilter();
var refElement = uidoc.Selection.PickObject(Autodesk.Revit.UI.Selection.ObjectType.Element, new SelectionFilter());
if (refElement != null)
{
var element = uidoc.Document.GetElement(refElement);
Category category = element.Category;
BuiltInCategory enumCategory = (BuiltInCategory)category.Id.IntegerValue;
//Check for other rectangular ducts with the same parameters
if (enumCategory.ToString() == "OST_DuctCurves" &&
element.get_Parameter(BuiltInParameter.RBS_CURVE_DIAMETER_PARAM)?.AsValueString() == null)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_DuctCurves, BuiltInParameter.RBS_DUCT_SYSTEM_TYPE_PARAM, BuiltInParameter.SYMBOL_FAMILY_NAME_PARAM, BuiltInParameter.CURVE_ELEM_LENGTH,
BuiltInParameter.RBS_CURVE_WIDTH_PARAM, BuiltInParameter.RBS_CURVE_HEIGHT_PARAM);
}
//Check for other ducts fittings with the same parameters
if (enumCategory.ToString() == "OST_DuctFitting" &&
element.get_Parameter(BuiltInParameter.RBS_CURVE_DIAMETER_PARAM)?.AsValueString() == null)
{
string elemParam01 = element.get_Parameter(BuiltInParameter.RBS_SYSTEM_CLASSIFICATION_PARAM).AsValueString();
string elemParam02 = element.get_Parameter(BuiltInParameter.ELEM_FAMILY_AND_TYPE_PARAM).AsValueString();
string elemParam03 = element.get_Parameter(BuiltInParameter.RBS_REFERENCE_FREESIZE).AsString();
string elemParam04 = element.get_Parameter(BuiltInParameter.RBS_REFERENCE_OVERALLSIZE).AsString();
string elemParam05 = element.get_Parameter(BuiltInParameter.RBS_CALCULATED_SIZE).AsString();
FilteredElementCollector viewCollector = new FilteredElementCollector(doc, uidoc.ActiveView.Id);
List <Element> ducts = new FilteredElementCollector(doc, uidoc.ActiveView.Id)
.OfCategory(Autodesk.Revit.DB.BuiltInCategory.OST_DuctFitting)
.Where(a => a.get_Parameter(BuiltInParameter.RBS_SYSTEM_CLASSIFICATION_PARAM).AsValueString() == elemParam01)
.Where(a => a.get_Parameter(BuiltInParameter.ELEM_FAMILY_AND_TYPE_PARAM).AsValueString() == elemParam02)
.Where(a => a.get_Parameter(BuiltInParameter.RBS_REFERENCE_FREESIZE).AsString() == elemParam03)
.Where(a => a.get_Parameter(BuiltInParameter.RBS_REFERENCE_OVERALLSIZE).AsString() == elemParam04)
.Where(a => a.get_Parameter(BuiltInParameter.RBS_CALCULATED_SIZE).AsString() == elemParam05)
.ToList();
foreach (Element x in ducts)
{
selectedElements.Add(x);
ListOfElements.Add(x);
}
}
bool boolTest = false;
var familyTypee = element.get_Parameter(BuiltInParameter.ELEM_FAMILY_PARAM).AsValueString();
if (familyTypee.Contains("Bend"))
{
boolTest = true;
}
bool TapTest = false;
var familyTapType = element.get_Parameter(BuiltInParameter.ELEM_FAMILY_PARAM).AsValueString();
if (familyTapType.Contains("Tap"))
{
TapTest = true;
}
//Check for other round ducts with the same parameters
if (enumCategory.ToString() == "OST_DuctCurves" &&
element.get_Parameter(BuiltInParameter.RBS_CURVE_DIAMETER_PARAM)?.AsValueString() != null &&
TapTest != true)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_DuctCurves, BuiltInParameter.RBS_DUCT_SYSTEM_TYPE_PARAM, BuiltInParameter.SYMBOL_FAMILY_NAME_PARAM, BuiltInParameter.CURVE_ELEM_LENGTH,
BuiltInParameter.RBS_CURVE_SURFACE_AREA, BuiltInParameter.RBS_CURVE_DIAMETER_PARAM);
}
//Check for other rectangular fab ducts with the same parameters
if (enumCategory.ToString() == "OST_FabricationDuctwork" &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_ANGLE)?.AsValueString() == null &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_DIAMETER_IN)?.AsValueString() == null &&
element.get_Parameter(BuiltInParameter.ELEM_FAMILY_PARAM)?.AsValueString() != "Generic Square Bend" &&
TapTest != true)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_FabricationDuctwork, BuiltInParameter.ELEM_FAMILY_PARAM, BuiltInParameter.FABRICATION_PART_LENGTH, BuiltInParameter.FABRICATION_PART_DEPTH_IN,
BuiltInParameter.FABRICATION_PART_WIDTH_IN, BuiltInParameter.FABRICATION_SERVICE_PARAM);
}
//Check for other rectangular fab ducts fittings of angle 90 with the same parameters
//if (enumCategory.ToString() == "OST_FabricationDuctwork"
// && element.get_Parameter(BuiltInParameter.FABRICATION_PART_ANGLE)?.AsValueString() == null
// && element.get_Parameter(BuiltInParameter.FABRICATION_PART_DIAMETER_IN)?.AsValueString() == null
// && element.get_Parameter(BuiltInParameter.ELEM_FAMILY_PARAM)?.AsValueString() == "Generic Square Bend"
// )
//{
// filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_FabricationDuctwork, BuiltInParameter.ELEM_FAMILY_PARAM, BuiltInParameter.ELEM_FAMILY_AND_TYPE_PARAM, BuiltInParameter.FABRICATION_PART_DEPTH_IN,
// BuiltInParameter.FABRICATION_PART_WIDTH_IN, BuiltInParameter.FABRICATION_SERVICE_PARAM);
//}
//Check for other rectangular fab ducts fittings of angle 90 with the same parameters
if (enumCategory.ToString() == "OST_FabricationDuctwork" &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_ANGLE)?.AsValueString() == null &&
boolTest == true &&
TapTest != true
)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_FabricationDuctwork, BuiltInParameter.ELEM_FAMILY_PARAM, BuiltInParameter.ELEM_FAMILY_AND_TYPE_PARAM, BuiltInParameter.FABRICATION_PART_DEPTH_IN,
BuiltInParameter.FABRICATION_PART_WIDTH_IN, BuiltInParameter.FABRICATION_SERVICE_PARAM);
}
//Check for other rectangular fab ducts fittings with the same parameters
if (enumCategory.ToString() == "OST_FabricationDuctwork" &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_ANGLE)?.AsValueString() != null &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_DIAMETER_IN)?.AsValueString() == null
)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_FabricationDuctwork, BuiltInParameter.ELEM_FAMILY_AND_TYPE_PARAM, BuiltInParameter.FABRICATION_PART_ANGLE, BuiltInParameter.FABRICATION_SERVICE_PARAM,
BuiltInParameter.FABRICATION_PART_DEPTH_IN, BuiltInParameter.FABRICATION_PART_WIDTH_IN);
}
//Check for other rectangular fab ducts fittings with the same parameters
if (enumCategory.ToString() == "OST_FabricationDuctwork" &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_ANGLE)?.AsValueString() != null &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_DIAMETER_IN)?.AsValueString() != null
)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_FabricationDuctwork, BuiltInParameter.ELEM_FAMILY_AND_TYPE_PARAM, BuiltInParameter.FABRICATION_PART_ANGLE, BuiltInParameter.FABRICATION_SERVICE_PARAM,
BuiltInParameter.FABRICATION_PART_DIAMETER_IN, BuiltInParameter.RBS_REFERENCE_OVERALLSIZE);
}
//Check for other round fab ducts with the same parameters
if (enumCategory.ToString() == "OST_FabricationDuctwork" &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_ANGLE)?.AsValueString() == null &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_DIAMETER_IN)?.AsValueString() != null &&
TapTest != true
)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_FabricationDuctwork, BuiltInParameter.ELEM_FAMILY_PARAM, BuiltInParameter.FABRICATION_PART_LENGTH, BuiltInParameter.FABRICATION_PART_DIAMETER_IN,
BuiltInParameter.FABRICATION_PART_SHEETMETAL_AREA, BuiltInParameter.FABRICATION_SERVICE_PARAM);
}
//Check for other round fab ducts with the same parameters
if (enumCategory.ToString() == "OST_FabricationDuctwork" &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_ANGLE)?.AsValueString() == null &&
element.get_Parameter(BuiltInParameter.FABRICATION_PART_DIAMETER_IN)?.AsValueString() != null &&
TapTest == true
)
{
filterParam(element, Autodesk.Revit.DB.BuiltInCategory.OST_FabricationDuctwork, BuiltInParameter.ELEM_FAMILY_PARAM, BuiltInParameter.FABRICATION_PART_LENGTH, BuiltInParameter.FABRICATION_PART_DIAMETER_IN,
BuiltInParameter.RBS_REFERENCE_OVERALLSIZE, BuiltInParameter.FABRICATION_SERVICE_PARAM);
}
selectedElements.Add(element);
//TODO: check if element is from the right category
OverrideGraphicSettings overrideGraphicSettings = new OverrideGraphicSettings();
Color colorSelect = MainForm.ColorSelected;
//Split coloSelect in R,G,B to be transformed to a Revit color later
byte r = colorSelect.R;
byte g = colorSelect.G;
byte b = colorSelect.B;
#if REVIT2020 || REVIT2019
OverrideElemtColor.Graphics20192020(doc, ref overrideGraphicSettings, r, g, b);
#else
OverrideElemtColor.Graphics20172018(doc, ref overrideGraphicSettings, r, g, b);
#endif
foreach (Element x in selectedElements)
{
//Override color of element
doc.ActiveView.SetElementOverrides(x.Id, overrideGraphicSettings);
}
selectedElement = element;
//Add element to the temporary list of selected elemenents
ListOfElements.Add(element);
}
}