public bool ValidateChanges(Project project)
{
data.IntegrationEnabled = this.cbEnableMakefileIntegration.Active;
data.RelativeMakefileName = this.fileEntryMakefilePath.Path;
data.BuildFilesVar.Sync = this.cbKeepFilesSync.Active;
data.BuildFilesVar.Name = GetActiveVar(comboFilesVar);
data.BuildFilesVar.Prefix = this.entryFilesPattern.Text.Trim();
data.DeployFilesVar.Sync = this.cbKeepDeployFilesSync.Active;
data.DeployFilesVar.Name = GetActiveVar(comboDeployFilesVar);
data.DeployFilesVar.Prefix = this.entryDeployFilesPattern.Text.Trim();
data.ResourcesVar.Sync = this.cbKeepResourcesSync.Active;
data.ResourcesVar.Name = GetActiveVar(comboResourcesVar);
data.ResourcesVar.Prefix = this.entryResourcesPattern.Text.Trim();
data.OthersVar.Sync = this.cbKeepOthersSync.Active;
data.OthersVar.Name = GetActiveVar(comboOthersVar);
data.OthersVar.Prefix = this.entryOthersPattern.Text.Trim();
if (!this.cbFileSync.Active)
{
// Files sync is unchecked, disable syncing of all files
data.BuildFilesVar.Sync = false;
data.DeployFilesVar.Sync = false;
data.ResourcesVar.Sync = false;
data.OthersVar.Sync = false;
}
// References
data.SyncReferences = this.cbKeepRefSync.Active;
data.PackageRefVar.Sync = this.cbKeepRefSync.Active;
data.PackageRefVar.Name = GetActiveVar(comboPackageRefVar);
data.PackageRefVar.Prefix = this.entryPackageRefPattern.Text.Trim();
data.AsmRefVar.Sync = this.cbKeepRefSync.Active;
data.AsmRefVar.Name = GetActiveVar(comboAsmRefVar);
data.AsmRefVar.Prefix = this.entryAsmRefPattern.Text.Trim();
data.ProjectRefVar.Sync = this.cbKeepRefSync.Active;
data.ProjectRefVar.Name = GetActiveVar(comboProjectRefVar);
data.ProjectRefVar.Prefix = this.entryProjectRefPattern.Text.Trim();
data.IsAutotoolsProject = this.cbAutotoolsProject.Active;
if (this.cbAutotoolsProject.Active)
{
data.RelativeConfigureInPath = this.fileEntryConfigureInPath.Path;
}
//data.AssemblyNameVar = GetActiveVar (comboAssemblyName);
//data.OutputDirVar = GetActiveVar (comboOutputDir);
data.BuildTargetName = this.BuildTargetName.Text.Trim();
data.ExecuteTargetName = this.ExecuteTargetName.Text.Trim();
data.CleanTargetName = this.CleanTargetName.Text.Trim();
data.ParallelProcesses = this.spinProcesses.ValueAsInt;
data.MessageRegexName = GetActiveVar(comboMessageType);
if (data.MessageRegexName == "Custom")
{
data.CustomErrorRegex = this.entryErrorRegex.Text;
data.CustomWarningRegex = this.entryWarningRegex.Text;
}
// Data validation
MakefileData oldData = project.ExtendedProperties ["MonoDevelop.Autotools.MakefileInfo"] as MakefileData;
MakefileData tmpData = data;
if (tmpData.IntegrationEnabled)
{
//Validate
try {
tmpData.Makefile.GetVariables();
} catch (FileNotFoundException e) {
ShowMakefileNotFoundError(e);
return(false);
} catch (Exception e) {
MessageService.ShowException(parentDialog, e, GettextCatalog.GetString("Specified makefile is invalid: {0}", tmpData.AbsoluteMakefileName));
return(false);
}
if (tmpData.IsAutotoolsProject &&
!File.Exists(System.IO.Path.Combine(tmpData.AbsoluteConfigureInPath, "configure.in")) &&
!File.Exists(System.IO.Path.Combine(tmpData.AbsoluteConfigureInPath, "configure.ac")))
{
MessageService.ShowError(parentDialog, GettextCatalog.GetString("Path specified for configure.in is invalid: {0}", tmpData.RelativeConfigureInPath));
return(false);
}
if (tmpData.SyncReferences &&
(String.IsNullOrEmpty(tmpData.PackageRefVar.Name) ||
String.IsNullOrEmpty(tmpData.AsmRefVar.Name) ||
String.IsNullOrEmpty(tmpData.ProjectRefVar.Name)))
{
MessageService.ShowError(parentDialog, GettextCatalog.GetString("'Sync References' is enabled, but one of Reference variables is not set. Please correct this."));
return(false);
}
if (!CheckNonEmptyFileVar(tmpData.BuildFilesVar, "Build"))
{
return(false);
}
if (!CheckNonEmptyFileVar(tmpData.DeployFilesVar, "Deploy"))
{
return(false);
}
if (!CheckNonEmptyFileVar(tmpData.ResourcesVar, "Resources"))
{
return(false);
}
if (!CheckNonEmptyFileVar(tmpData.OthersVar, "Others"))
{
return(false);
}
//FIXME: All file vars must be distinct
try {
tmpData.GetErrorRegex(true);
} catch (Exception e) {
MessageService.ShowError(parentDialog, GettextCatalog.GetString("Invalid regex for Error messages: {0}", e.Message));
return(false);
}
try {
tmpData.GetWarningRegex(true);
} catch (Exception e) {
MessageService.ShowError(parentDialog, GettextCatalog.GetString(
"Invalid regex for Warning messages: {0}", e.Message));
return(false);
}
//FIXME: Do this only if there are changes b/w tmpData and Data
project.ExtendedProperties ["MonoDevelop.Autotools.MakefileInfo"] = tmpData;
IProgressMonitor monitor = IdeApp.Workbench.ProgressMonitors.GetStatusProgressMonitor(
GettextCatalog.GetString("Updating project"), "gtk-run", true);
tmpData.UpdateProject(monitor, oldData == null || (!oldData.IntegrationEnabled && tmpData.IntegrationEnabled));
}
else
{
if (oldData != null)
{
oldData.IntegrationEnabled = false;
}
}
return(true);
}
//FIXME: Check whether autogen.sh is required or not
protected override BuildResult Build(IProgressMonitor monitor, SolutionEntityItem entry, ConfigurationSelector configuration)
{
Project project = entry as Project;
if (project == null)
{
return(base.Build(monitor, entry, configuration));
}
MakefileData data = project.ExtendedProperties ["MonoDevelop.Autotools.MakefileInfo"] as MakefileData;
if (data == null || !data.SupportsIntegration || String.IsNullOrEmpty(data.BuildTargetName))
{
return(base.Build(monitor, entry, configuration));
}
//FIXME: Gen autofoo ? autoreconf?
string output = String.Empty;
int exitCode = 0;
monitor.BeginTask(GettextCatalog.GetString("Building {0}", project.Name), 1);
try
{
string baseDir = project.BaseDirectory;
string args = string.Format("-j {0} {1}", data.ParallelProcesses, data.BuildTargetName);
StringWriter swOutput = new StringWriter();
LogTextWriter chainedOutput = new LogTextWriter();
chainedOutput.ChainWriter(monitor.Log);
chainedOutput.ChainWriter(swOutput);
ProcessWrapper process = Runtime.ProcessService.StartProcess("make",
args,
baseDir,
chainedOutput,
chainedOutput,
null);
process.WaitForOutput();
exitCode = process.ExitCode;
output = swOutput.ToString();
chainedOutput.Close();
swOutput.Close();
monitor.Step(1);
}
catch (Exception e)
{
monitor.ReportError(GettextCatalog.GetString("Project could not be built: "), e);
return(null);
}
finally
{
monitor.EndTask();
}
TempFileCollection tf = new TempFileCollection();
Regex regexError = data.GetErrorRegex(false);
Regex regexWarning = data.GetWarningRegex(false);
BuildResult cr = ParseOutput(tf, output, project.BaseDirectory, regexError, regexWarning);
if (exitCode != 0 && cr.FailedBuildCount == 0)
{
cr.AddError(GettextCatalog.GetString("Build failed. See Build Output panel."));
}
return(cr);
}
//FIXME: Check whether autogen.sh is required or not
protected async override Task <BuildResult> OnBuild(ProgressMonitor monitor, ConfigurationSelector configuration, OperationContext operationContext)
{
if (data == null || !data.SupportsIntegration || String.IsNullOrEmpty(data.BuildTargetName))
{
return(await base.OnBuild(monitor, configuration, operationContext));
}
//FIXME: Gen autofoo ? autoreconf?
string output = String.Empty;
int exitCode = 0;
monitor.BeginTask(GettextCatalog.GetString("Building {0}", Project.Name), 1);
try
{
string baseDir = Project.BaseDirectory;
string args = string.Format("-j {0} {1}", data.ParallelProcesses, data.BuildTargetName);
using (var swOutput = new StringWriter()) {
using (var chainedOutput = new LogTextWriter()) {
chainedOutput.ChainWriter(monitor.Log);
chainedOutput.ChainWriter(swOutput);
using (ProcessWrapper process = Runtime.ProcessService.StartProcess("make",
args,
baseDir,
chainedOutput,
chainedOutput,
null)) {
await process.Task;
chainedOutput.UnchainWriter(monitor.Log);
chainedOutput.UnchainWriter(swOutput);
exitCode = process.ExitCode;
output = swOutput.ToString();
monitor.Step(1);
}
}
}
}
catch (Exception e)
{
monitor.ReportError(GettextCatalog.GetString("Project could not be built: "), e);
return(null);
}
finally
{
monitor.EndTask();
}
TempFileCollection tf = new TempFileCollection();
Regex regexError = data.GetErrorRegex(false);
Regex regexWarning = data.GetWarningRegex(false);
BuildResult cr = ParseOutput(tf, output, Project.BaseDirectory, regexError, regexWarning);
if (exitCode != 0 && cr.FailedBuildCount == 0)
{
cr.AddError(GettextCatalog.GetString("Build failed. See Build Output panel."));
}
return(cr);
}