public void ReconnectOpenRequest(
DurableV1ReconnectContext durableV1ReconnectContext,
DurableV2ReconnectContext durableV2ReconnectContext,
OplockLeaseType oplockLeaseType,
LeaseKeyDifferentialType leaseKeyDifferentialType,
ClientIdType clientIdType,
CreateGuidType createGuidType)
{
if ((oplockLeaseType == OplockLeaseType.LeaseV1 || oplockLeaseType == OplockLeaseType.LeaseV2)
&& !testConfig.IsLeasingSupported)
Site.Assert.Inconclusive("Test case is applicable in servers that support leasing.");
bool isSameLeaseKey = (leaseKeyDifferentialType == LeaseKeyDifferentialType.SameLeaseKey);
bool isSameClient = (clientIdType == ClientIdType.SameClient);
bool isSameCreateGuid = (createGuidType == CreateGuidType.SameCreateGuid);
FILEID fileIdAfterDisconnection;
Smb2CreateContextResponse[] serverCreateContexts;
IPAddress targetIPAddress;
string targetServer;
string targetShare;
#region Construct Create Contexts
Smb2CreateContextRequest[] smb2CreateContextRequest = GetOpenFileCreateContext(
DurableV1RequestContext.DurableV1RequestContextNotExist,
DurableV2RequestContext.DurableV2RequestContextNotExist,
durableV1ReconnectContext,
durableV2ReconnectContext,
oplockLeaseType,
isSameLeaseKey,
isSameCreateGuid);
#endregion
#region Client reconnect to server
Site.Log.Add(LogEntryKind.Debug, "Client reconnect to server");
#region Reconnect to Common Share or CA Share
if (!isCAShare)
{
targetIPAddress = testConfig.SutIPAddress;
targetServer = testConfig.SutComputerName;
targetShare = testConfig.BasicFileShare;
}
else
{
targetIPAddress = testConfig.CAShareServerIP;
targetServer = testConfig.CAShareServerName;
targetShare = testConfig.CAShareName;
}
// Connect to Server
testClientAfterDisconnection = new Smb2FunctionalClient(testConfig.Timeout, testConfig, this.Site);
testClientAfterDisconnection.CreditGoal = 10;
testClientAfterDisconnection.ConnectToServer(testConfig.UnderlyingTransport, targetServer, targetIPAddress);
// Negotiate
testClientAfterDisconnection.Negotiate(
requestDialect,
testConfig.IsSMB1NegotiateEnabled,
capabilityValue: clientCapabilities,
// If the reconnect use the same client guid, then keep client guid the same value, otherwise use a new client guid.
clientGuid: (isSameClient ? clientGuid : Guid.NewGuid()));
uint status = testClientAfterDisconnection.SessionSetup(
testConfig.DefaultSecurityPackage,
targetServer,
testConfig.AccountCredential,
testConfig.UseServerGssToken);
Site.Assert.AreEqual(Smb2Status.STATUS_SUCCESS, status, "Reconnect Session Setup should be successful, actual status is {0}", Smb2Status.GetStatusCode(status));
// TreeConnect
testClientAfterDisconnection.TreeConnect(sharePath, out treeIdAfterDisconnection);
#endregion
#region Send Create request according to different context combination
RequestedOplockLevel_Values requestedOplockLevel = RequestedOplockLevel_Values.OPLOCK_LEVEL_NONE;
switch (oplockLeaseType)
{
case OplockLeaseType.NoOplockOrLease:
{
requestedOplockLevel = RequestedOplockLevel_Values.OPLOCK_LEVEL_NONE;
}
break;
case OplockLeaseType.BatchOplock:
{
requestedOplockLevel = RequestedOplockLevel_Values.OPLOCK_LEVEL_BATCH;
}
break;
case OplockLeaseType.LeaseV1:
case OplockLeaseType.LeaseV2:
{
requestedOplockLevel = RequestedOplockLevel_Values.OPLOCK_LEVEL_LEASE;
}
break;
}
status = OpenCreate(
testClientAfterDisconnection,
treeIdAfterDisconnection,
fileName,
out fileIdAfterDisconnection,
out serverCreateContexts,
requestedOplockLevel,
smb2CreateContextRequest);
#endregion
DurableHandleResponseContext durableHandleResponse;
LeaseResponseContext leaseResponse;
CheckResponseContexts(serverCreateContexts, out durableHandleResponse, out leaseResponse);
OpenResponse((ModelSmb2Status)status, durableHandleResponse, leaseResponse, handleConfig);
testClientAfterDisconnection.TreeDisconnect(treeIdAfterDisconnection);
testClientAfterDisconnection.LogOff();
#endregion
}
public void ReconnectOpenRequest(
DurableV1ReconnectContext durableV1ReconnectContext,
DurableV2ReconnectContext durableV2ReconnectContext,
OplockLeaseType oplockLeaseType,
LeaseKeyDifferentialType leaseKeyDifferentialType,
ClientIdType clientIdType,
CreateGuidType createGuidType)
{
if ((oplockLeaseType == OplockLeaseType.LeaseV1 || oplockLeaseType == OplockLeaseType.LeaseV2) &&
!testConfig.IsLeasingSupported)
{
Site.Assert.Inconclusive("Test case is applicable in servers that support leasing.");
}
bool isSameLeaseKey = (leaseKeyDifferentialType == LeaseKeyDifferentialType.SameLeaseKey);
bool isSameClient = (clientIdType == ClientIdType.SameClient);
bool isSameCreateGuid = (createGuidType == CreateGuidType.SameCreateGuid);
FILEID fileIdAfterDisconnection;
Smb2CreateContextResponse[] serverCreateContexts;
IPAddress targetIPAddress;
string targetServer;
string targetShare;
#region Construct Create Contexts
Smb2CreateContextRequest[] smb2CreateContextRequest = GetOpenFileCreateContext(
DurableV1RequestContext.DurableV1RequestContextNotExist,
DurableV2RequestContext.DurableV2RequestContextNotExist,
durableV1ReconnectContext,
durableV2ReconnectContext,
oplockLeaseType,
isSameLeaseKey,
isSameCreateGuid);
#endregion
#region Client reconnect to server
Site.Log.Add(LogEntryKind.Debug, "Client reconnect to server");
#region Reconnect to Common Share or CA Share
if (!isCAShare)
{
targetIPAddress = testConfig.SutIPAddress;
targetServer = testConfig.SutComputerName;
targetShare = testConfig.BasicFileShare;
}
else
{
targetIPAddress = testConfig.CAShareServerIP;
targetServer = testConfig.CAShareServerName;
targetShare = testConfig.CAShareName;
}
// Connect to Server
testClientAfterDisconnection = new Smb2FunctionalClient(testConfig.Timeout, testConfig, this.Site);
testClientAfterDisconnection.CreditGoal = 10;
testClientAfterDisconnection.ConnectToServer(testConfig.UnderlyingTransport, targetServer, targetIPAddress);
// Negotiate
testClientAfterDisconnection.Negotiate(
requestDialect,
testConfig.IsSMB1NegotiateEnabled,
capabilityValue: clientCapabilities,
// If the reconnect use the same client guid, then keep client guid the same value, otherwise use a new client guid.
clientGuid: (isSameClient ? clientGuid : Guid.NewGuid()));
uint status = testClientAfterDisconnection.SessionSetup(
testConfig.DefaultSecurityPackage,
targetServer,
testConfig.AccountCredential,
testConfig.UseServerGssToken);
Site.Assert.AreEqual(Smb2Status.STATUS_SUCCESS, status, "Reconnect Session Setup should be successful, actual status is {0}", Smb2Status.GetStatusCode(status));
// TreeConnect
testClientAfterDisconnection.TreeConnect(sharePath, out treeIdAfterDisconnection);
#endregion
#region Send Create request according to different context combination
RequestedOplockLevel_Values requestedOplockLevel = RequestedOplockLevel_Values.OPLOCK_LEVEL_NONE;
switch (oplockLeaseType)
{
case OplockLeaseType.NoOplockOrLease:
{
requestedOplockLevel = RequestedOplockLevel_Values.OPLOCK_LEVEL_NONE;
}
break;
case OplockLeaseType.BatchOplock:
{
requestedOplockLevel = RequestedOplockLevel_Values.OPLOCK_LEVEL_BATCH;
}
break;
case OplockLeaseType.LeaseV1:
case OplockLeaseType.LeaseV2:
{
requestedOplockLevel = RequestedOplockLevel_Values.OPLOCK_LEVEL_LEASE;
}
break;
}
status = OpenCreate(
testClientAfterDisconnection,
treeIdAfterDisconnection,
fileName,
out fileIdAfterDisconnection,
out serverCreateContexts,
requestedOplockLevel,
smb2CreateContextRequest);
#endregion
DurableHandleResponseContext durableHandleResponse;
LeaseResponseContext leaseResponse;
CheckResponseContexts(serverCreateContexts, out durableHandleResponse, out leaseResponse);
OpenResponse((ModelSmb2Status)status, durableHandleResponse, leaseResponse, handleConfig);
testClientAfterDisconnection.TreeDisconnect(treeIdAfterDisconnection);
testClientAfterDisconnection.LogOff();
#endregion
}
public static void ReconnectOpenRequest(
DurableV1ReconnectContext durableV1ReconnectContext,
DurableV2ReconnectContext durableV2ReconnectContext,
OplockLeaseType oplockLeaseType,
LeaseKeyDifferentialType leaseKeyDifferentialType,
ClientIdType clientIdType,
CreateGuidType createGuidType)
{
// If lease does not exist, LeaseKeyDifferentialType and LeaseStateDifferentialType take no effect. So just fix their values.
Condition.IfThen(oplockLeaseType != OplockLeaseType.LeaseV1 && oplockLeaseType != OplockLeaseType.LeaseV2,
leaseKeyDifferentialType == LeaseKeyDifferentialType.SameLeaseKey);
// If there is no durablev2 reconnect context, fix the value of CreateGuid.
Condition.IfThen(durableV2ReconnectContext == DurableV2ReconnectContext.DurableV2ReconnectContextNotExist, createGuidType == CreateGuidType.SameCreateGuid);
// Do not need to test the situation of both V1 and V2 reconnect contexts not existed.
Condition.IsFalse(durableV1ReconnectContext == DurableV1ReconnectContext.DurableV1ReconnectContextNotExist
&& durableV2ReconnectContext == DurableV2ReconnectContext.DurableV2ReconnectContextNotExist);
// Only the server implements the SMB 2.1 or SMB 3.x dialect family supports leasing
Condition.IfThen(NegotiateDialect == DialectRevision.Smb2002, oplockLeaseType != OplockLeaseType.LeaseV1 && oplockLeaseType != OplockLeaseType.LeaseV2);
// Lease V2 is only vaild for SMB 3.x dialect family.
Condition.IfThen(NegotiateDialect == DialectRevision.Smb21, oplockLeaseType != OplockLeaseType.LeaseV2);
// If leasing is not supported, do not test LeaseV1 or LeaseV2.
Condition.IfThen(!Config.IsLeasingSupported,
oplockLeaseType != OplockLeaseType.LeaseV1 && oplockLeaseType != OplockLeaseType.LeaseV2);
// 3.3.5.9.10, 3.3.5.9.12 This section applies only to servers that implement the SMB 3.x dialect family.
Condition.IfThen(!ModelUtility.IsSmb3xFamily(Config.MaxSmbVersionSupported), durableV2ReconnectContext == DurableV2ReconnectContext.DurableV2ReconnectContextNotExist);
// Add restriction to limit the generated cases of model.
Combination.Pairwise(durableV1ReconnectContext, durableV2ReconnectContext, oplockLeaseType, leaseKeyDifferentialType, clientIdType, createGuidType);
Condition.IsNull(Request);
Request = new ModelOpenFileRequest(
DurableV1RequestContext.DurableV1RequestContextNotExist,
DurableV2RequestContext.DurableV2RequestContextNotExist,
durableV1ReconnectContext,
durableV2ReconnectContext,
oplockLeaseType,
leaseKeyDifferentialType == LeaseKeyDifferentialType.SameLeaseKey,
clientIdType == ClientIdType.SameClient,
createGuidType == CreateGuidType.SameCreateGuid);
}
