public void Actions_CanPerformHoldInteraction()
{
var gamepad = InputSystem.AddDevice <Gamepad>();
var action = new InputAction(binding: "<Gamepad>/{primaryAction}", interactions: "hold(duration=0.4)");
action.Enable();
using (var trace = new InputActionTrace(action))
{
// Press.
Press(gamepad.buttonSouth, time: 10);
Assert.That(trace, Started <HoldInteraction>(action, gamepad.buttonSouth, time: 10, value: 1.0));
Assert.That(action.ReadValue <float>(), Is.EqualTo(1));
Assert.That(action.phase, Is.EqualTo(InputActionPhase.Started));
trace.Clear();
// Release in less than hold time.
Release(gamepad.buttonSouth, time: 10.25);
Assert.That(trace, Canceled <HoldInteraction>(action, gamepad.buttonSouth, duration: 0.25, time: 10.25, value: 0.0));
Assert.That(action.phase, Is.EqualTo(InputActionPhase.Waiting));
Assert.That(action.ReadValue <float>(), Is.Zero);
trace.Clear();
// Press again.
Press(gamepad.buttonSouth, time: 10.5);
Assert.That(trace, Started <HoldInteraction>(action, gamepad.buttonSouth, time: 10.5, value: 1.0));
Assert.That(action.ReadValue <float>(), Is.EqualTo(1));
Assert.That(action.phase, Is.EqualTo(InputActionPhase.Started));
trace.Clear();
// Let time pass but stay under hold time.
currentTime = 10.75;
InputSystem.Update();
Assert.That(trace, Is.Empty);
// Now exceed hold time. Make sure action performs and *stays* performed.
currentTime = 11;
InputSystem.Update();
Assert.That(trace,
Performed <HoldInteraction>(action, gamepad.buttonSouth, time: 11, duration: 0.5, value: 1.0));
Assert.That(action.phase, Is.EqualTo(InputActionPhase.Performed));
Assert.That(action.ReadValue <float>(), Is.EqualTo(1));
trace.Clear();
// Release button.
Release(gamepad.buttonSouth, time: 11.5);
Assert.That(trace, Canceled <HoldInteraction>(action, gamepad.buttonSouth, time: 11.5, duration: 1, value: 0.0));
}
}
public void Actions_WhenTransitionFromOneInteractionToNext_GetCallbacks()
{
var gamepad = InputSystem.AddDevice <Gamepad>();
var action = new InputAction("test", InputActionType.Button, binding: "<Gamepad>/buttonSouth",
interactions: "tap(duration=1),slowTap");
action.Enable();
using (var trace = new InputActionTrace(action))
{
Press(gamepad.buttonSouth);
Assert.That(trace,
Started <TapInteraction>(action, gamepad.buttonSouth, time: 0));
trace.Clear();
// Expire the tap. The system should transitioning from the tap to a slowtap.
// Note the starting time of the slowTap will be 0 not 2.
runtime.currentTime = 2;
InputSystem.Update();
Assert.That(trace,
Canceled <TapInteraction>(action, gamepad.buttonSouth)
.AndThen(Started <SlowTapInteraction>(action, gamepad.buttonSouth, time: 0)));
}
}
public void Actions_CanCustomizeButtonPressPointsOfInteractions()
{
var gamepad = InputSystem.AddDevice <Gamepad>();
var pressAction = new InputAction("PressAction", binding: "<Gamepad>/leftTrigger", interactions: "press(pressPoint=0.234)");
var tapAction = new InputAction("TapAction", binding: "<Gamepad>/leftTrigger", interactions: "tap(pressPoint=0.345)");
var slowTapAction = new InputAction("SlowTapAction", binding: "<Gamepad>/leftTrigger", interactions: "slowtap(pressPoint=0.456)");
var multiTapAction = new InputAction("MultiTapAction", binding: "<Gamepad>/leftTrigger", interactions: "multitap(pressPoint=0.567)");
var holdAction = new InputAction("HoldAction", binding: "<Gamepad>/leftTrigger", interactions: "hold(pressPoint=0.678)");
pressAction.Enable();
tapAction.Enable();
slowTapAction.Enable();
multiTapAction.Enable();
holdAction.Enable();
// Render the global default inactive.
InputSystem.settings.defaultButtonPressPoint = 0;
using (var trace = new InputActionTrace())
{
trace.SubscribeToAll();
Set(gamepad.leftTrigger, 0.123f);
Assert.That(trace, Started <PressInteraction>(pressAction));
trace.Clear();
Set(gamepad.leftTrigger, 0.3f);
Assert.That(trace, Performed <PressInteraction>(pressAction));
trace.Clear();
Set(gamepad.leftTrigger, 0.4f);
Assert.That(trace, Started <TapInteraction>(tapAction));
trace.Clear();
Set(gamepad.leftTrigger, 0.5f);
Assert.That(trace, Started <SlowTapInteraction>(slowTapAction));
trace.Clear();
Set(gamepad.leftTrigger, 0.6f);
Assert.That(trace, Started <MultiTapInteraction>(multiTapAction));
trace.Clear();
Set(gamepad.leftTrigger, 0.7f);
Assert.That(trace, Started <HoldInteraction>(holdAction));
}
}
public void Actions_StartedAndCanceledAreEnforcedImplicitly()
{
var gamepad = InputSystem.AddDevice <Gamepad>();
InputSystem.RegisterInteraction <InteractionThatOnlyPerforms>();
var action1 = new InputAction(name: "action1", type: InputActionType.Button, binding: "<Gamepad>/buttonSouth", interactions: "interactionThatOnlyPerforms(stayPerformed=true)");
var action2 = new InputAction(name: "action2", type: InputActionType.Button, binding: "<Gamepad>/buttonSouth", interactions: "interactionThatOnlyPerforms(stayPerformed=false)");
var action3 = new InputAction(name: "action3", type: InputActionType.Button, binding: "<Gamepad>/buttonSouth");
var action4 = new InputAction(name: "action4", type: InputActionType.Value, binding: "<Gamepad>/buttonSouth");
// Pass-Through is special (as always).
var action5 = new InputAction(name: "action5", type: InputActionType.PassThrough, binding: "<Gamepad>/buttonSouth");
var action6 = new InputAction(name: "action6", type: InputActionType.PassThrough, binding: "<Gamepad>/buttonSouth", interactions: "press");
action1.Enable();
action2.Enable();
action3.Enable();
action4.Enable();
action5.Enable();
action6.Enable();
using (var trace1 = new InputActionTrace(action1))
using (var trace2 = new InputActionTrace(action2))
using (var trace3 = new InputActionTrace(action3))
using (var trace4 = new InputActionTrace(action4))
using (var trace5 = new InputActionTrace(action5))
using (var trace6 = new InputActionTrace(action6))
{
Press(gamepad.buttonSouth);
Assert.That(trace1, Started(action1).AndThen(Performed(action1)));
Assert.That(trace2, Started(action2).AndThen(Performed(action2)).AndThen(Canceled(action2)));
Assert.That(trace3, Started(action3).AndThen(Performed(action3)));
Assert.That(trace4, Started(action4).AndThen(Performed(action4)));
Assert.That(trace5, Performed(action5));
Assert.That(trace6, Started(action6).AndThen(Performed(action6)));
trace1.Clear();
trace2.Clear();
trace3.Clear();
trace4.Clear();
trace5.Clear();
trace6.Clear();
Release(gamepad.buttonSouth);
Assert.That(trace1, Is.Empty);
Assert.That(trace2, Is.Empty);
Assert.That(trace3, Canceled(action3));
Assert.That(trace4, Canceled(action4));
Assert.That(trace5, Performed(action5)); // Any value change performs.
Assert.That(trace6, Canceled(action6));
}
}
public void Actions_HoldInteraction_DoesNotGetStuck_WhenHeldAndReleasedInSameEvent()
{
var gamepad = InputSystem.AddDevice <Gamepad>();
var action = new InputAction(binding: "<Gamepad>/buttonSouth", interactions: "hold(duration=0.4)");
action.Enable();
using (var trace = new InputActionTrace(action))
{
Press(gamepad.buttonSouth, time: 10, queueEventOnly: true);
Release(gamepad.buttonSouth, time: 10.41, queueEventOnly: true);
currentTime = 10.5;
InputSystem.Update();
Assert.That(trace,
Started <HoldInteraction>(action, gamepad.buttonSouth, time: 10, value: 1.0)
.AndThen(Performed <HoldInteraction>(action, gamepad.buttonSouth, time: 10.41, value: 0f)) // Note the zero value; button is already released.
.AndThen(Canceled <HoldInteraction>(action, gamepad.buttonSouth, time: 10.41, value: 0f)));
}
}
public void Actions_ReleasedHoldInteractionIsCancelled_WithMultipleBindings()
{
var keyboard = InputSystem.AddDevice <Keyboard>();
var action = new InputAction(binding: "<Keyboard>/space", interactions: "hold(duration=0.4)");
action.AddBinding("<Keyboard>/s");
action.Enable();
using (var trace = new InputActionTrace(action))
{
// Press and hold.
Press(keyboard.spaceKey, time: 10);
Assert.That(trace, Started <HoldInteraction>(action, keyboard.spaceKey, time: 10, value: 1.0));
Assert.That(action.ReadValue <float>(), Is.EqualTo(1));
Assert.That(action.phase, Is.EqualTo(InputActionPhase.Started));
trace.Clear();
// Exceed hold time. Make sure action performs and *stays* performed.
currentTime = 10.5;
InputSystem.Update();
Assert.That(trace,
Performed <HoldInteraction>(action, keyboard.spaceKey, time: 10.5, duration: 0.5, value: 1.0));
Assert.That(action.phase, Is.EqualTo(InputActionPhase.Performed));
Assert.That(action.ReadValue <float>(), Is.EqualTo(1));
trace.Clear();
// Release.
Release(keyboard.spaceKey, time: 10.6);
Assert.That(trace, Canceled <HoldInteraction>(action, keyboard.spaceKey, duration: 0.6, time: 10.6, value: 0.0));
Assert.That(action.phase, Is.EqualTo(InputActionPhase.Waiting));
Assert.That(action.ReadValue <float>(), Is.Zero);
}
}
public void Actions_CanPerformPressInteraction_UsingReleasePointWhenBoundToAxisControl()
{
var gamepad = InputSystem.AddDevice <Gamepad>();
InputSystem.settings.defaultButtonPressPoint = 0.5f;
InputSystem.settings.buttonReleaseThreshold = 0.75f; // Puts release point at 0.375.
var action = new InputAction(binding: "<Gamepad>/leftTrigger", interactions: "press");
action.Enable();
using (var trace = new InputActionTrace(action))
{
Set(gamepad.leftTrigger, 0.35f);
Assert.That(trace, Started(action, control: gamepad.leftTrigger, value: 0.35f));
trace.Clear();
Set(gamepad.leftTrigger, 0.5f);
Assert.That(trace, Performed(action, control: gamepad.leftTrigger, value: 0.5f));
trace.Clear();
Set(gamepad.leftTrigger, 0.6f);
Assert.That(trace, Is.Empty);
Set(gamepad.leftTrigger, 0.4f);
Assert.That(trace, Is.Empty);
Set(gamepad.leftTrigger, 0.3f);
Assert.That(trace, Canceled(action, control: gamepad.leftTrigger, value: 0f));
}
}
public void Actions_CanPerformDoubleTapInteraction()
{
var gamepad = InputSystem.AddDevice <Gamepad>();
runtime.advanceTimeEachDynamicUpdate = 0;
var action = new InputAction(binding: "<Gamepad>/buttonSouth", interactions: "multitap(tapTime=0.5,tapDelay=0.75,tapCount=2)");
action.Enable();
using (var trace = new InputActionTrace())
{
trace.SubscribeTo(action);
// Press button.
runtime.currentTime = 1;
InputSystem.QueueStateEvent(gamepad, new GamepadState().WithButton(GamepadButton.South), 1);
InputSystem.Update();
var actions = trace.ToArray();
Assert.That(actions, Has.Length.EqualTo(1));
Assert.That(actions[0].phase, Is.EqualTo(InputActionPhase.Started));
Assert.That(actions[0].interaction, Is.TypeOf <MultiTapInteraction>());
Assert.That(actions[0].control, Is.SameAs(gamepad.buttonSouth));
Assert.That(actions[0].time, Is.EqualTo(1).Within(0.00001));
trace.Clear();
// Release before tap time and make sure the double tap cancels.
runtime.currentTime = 12;
InputSystem.QueueStateEvent(gamepad, new GamepadState(), 1.75);
InputSystem.Update();
actions = trace.ToArray();
Assert.That(actions, Has.Length.EqualTo(1));
Assert.That(actions[0].phase, Is.EqualTo(InputActionPhase.Canceled));
Assert.That(actions[0].interaction, Is.TypeOf <MultiTapInteraction>());
Assert.That(actions[0].control, Is.SameAs(gamepad.buttonSouth));
Assert.That(actions[0].time, Is.EqualTo(1.75).Within(0.00001));
trace.Clear();
// Press again and then release before tap time. Should see only the start from
// the initial press.
runtime.currentTime = 2.5;
InputSystem.QueueStateEvent(gamepad, new GamepadState().WithButton(GamepadButton.South), 2);
InputSystem.QueueStateEvent(gamepad, new GamepadState(), 2.25);
InputSystem.Update();
actions = trace.ToArray();
Assert.That(actions, Has.Length.EqualTo(1));
Assert.That(actions[0].phase, Is.EqualTo(InputActionPhase.Started));
Assert.That(actions[0].interaction, Is.TypeOf <MultiTapInteraction>());
Assert.That(actions[0].control, Is.SameAs(gamepad.buttonSouth));
Assert.That(actions[0].time, Is.EqualTo(2).Within(0.00001));
Assert.That(actions[0].ReadValue <float>(), Is.EqualTo(1).Within(0.00001));
trace.Clear();
// Wait for longer than tapDelay and make sure we're seeing a cancellation.
runtime.currentTime = 4;
InputSystem.Update();
actions = trace.ToArray();
Assert.That(actions, Has.Length.EqualTo(1));
Assert.That(actions[0].phase, Is.EqualTo(InputActionPhase.Canceled));
Assert.That(actions[0].interaction, Is.TypeOf <MultiTapInteraction>());
Assert.That(actions[0].control, Is.SameAs(gamepad.buttonSouth));
Assert.That(actions[0].time, Is.EqualTo(4).Within(0.00001));
Assert.That(actions[0].ReadValue <float>(), Is.EqualTo(0).Within(0.00001));// Button isn't pressed currently.
trace.Clear();
// Now press and release within tap time. Then press again within delay time but release
// only after tap time. Should we started and canceled.
runtime.currentTime = 6;
InputSystem.QueueStateEvent(gamepad, new GamepadState().WithButton(GamepadButton.South), 4.7);
InputSystem.QueueStateEvent(gamepad, new GamepadState(), 4.9);
InputSystem.QueueStateEvent(gamepad, new GamepadState().WithButton(GamepadButton.South), 5);
InputSystem.QueueStateEvent(gamepad, new GamepadState(), 5.9);
InputSystem.Update();
actions = trace.ToArray();
Assert.That(actions, Has.Length.EqualTo(2));
Assert.That(actions[0].phase, Is.EqualTo(InputActionPhase.Started));
Assert.That(actions[0].interaction, Is.TypeOf <MultiTapInteraction>());
Assert.That(actions[0].control, Is.SameAs(gamepad.buttonSouth));
Assert.That(actions[0].time, Is.EqualTo(4.7).Within(0.00001));
Assert.That(actions[0].ReadValue <float>(), Is.EqualTo(1).Within(0.00001));
Assert.That(actions[1].phase, Is.EqualTo(InputActionPhase.Canceled));
Assert.That(actions[1].interaction, Is.TypeOf <MultiTapInteraction>());
Assert.That(actions[1].control, Is.SameAs(gamepad.buttonSouth));
Assert.That(actions[1].time, Is.EqualTo(5.9).Within(0.00001));
Assert.That(actions[1].ReadValue <float>(), Is.EqualTo(0).Within(0.00001));
trace.Clear();
// Finally perform a full, proper double tap cycle.
runtime.currentTime = 8;
InputSystem.QueueStateEvent(gamepad, new GamepadState().WithButton(GamepadButton.South), 7);
InputSystem.QueueStateEvent(gamepad, new GamepadState(), 7.25);
InputSystem.QueueStateEvent(gamepad, new GamepadState().WithButton(GamepadButton.South), 7.5);
InputSystem.QueueStateEvent(gamepad, new GamepadState(), 7.75);
InputSystem.Update();
actions = trace.ToArray();
Assert.That(actions, Has.Length.EqualTo(2));
Assert.That(actions[0].phase, Is.EqualTo(InputActionPhase.Started));
Assert.That(actions[0].interaction, Is.TypeOf <MultiTapInteraction>());
Assert.That(actions[0].control, Is.SameAs(gamepad.buttonSouth));
Assert.That(actions[0].time, Is.EqualTo(7).Within(0.00001));
Assert.That(actions[0].ReadValue <float>(), Is.EqualTo(1).Within(0.00001));
Assert.That(actions[1].phase, Is.EqualTo(InputActionPhase.Performed));
Assert.That(actions[1].interaction, Is.TypeOf <MultiTapInteraction>());
Assert.That(actions[1].control, Is.SameAs(gamepad.buttonSouth));
Assert.That(actions[1].time, Is.EqualTo(7.75).Within(0.00001));
Assert.That(actions[1].ReadValue <float>(), Is.Zero.Within(0.00001));
}
}
public void Actions_CanPerformPressInteraction()
{
var gamepad = InputSystem.AddDevice <Gamepad>();
// We add a second input device (and bind to it), to test that the binding
// conflict resolution will not interfere with the interaction handling.
InputSystem.AddDevice <Keyboard>();
// Test all three press behaviors concurrently.
var pressOnlyAction = new InputAction("PressOnly", binding: "<Gamepad>/buttonSouth", interactions: "press(behavior=0)");
pressOnlyAction.AddBinding("<Keyboard>/a");
var releaseOnlyAction = new InputAction("ReleaseOnly", binding: "<Gamepad>/buttonSouth", interactions: "press(behavior=1)");
releaseOnlyAction.AddBinding("<Keyboard>/s");
var pressAndReleaseAction = new InputAction("PressAndRelease", binding: "<Gamepad>/buttonSouth", interactions: "press(behavior=2)");
pressAndReleaseAction.AddBinding("<Keyboard>/d");
pressOnlyAction.Enable();
releaseOnlyAction.Enable();
pressAndReleaseAction.Enable();
using (var pressOnly = new InputActionTrace(pressOnlyAction))
using (var releaseOnly = new InputActionTrace(releaseOnlyAction))
using (var pressAndRelease = new InputActionTrace(pressAndReleaseAction))
{
runtime.currentTime = 1;
Press(gamepad.buttonSouth);
Assert.That(pressOnly,
Started <PressInteraction>(pressOnlyAction, gamepad.buttonSouth, value: 1.0, time: 1)
.AndThen(Performed <PressInteraction>(pressOnlyAction, gamepad.buttonSouth, time: 1, duration: 0, value: 1.0)));
Assert.That(releaseOnly, Started <PressInteraction>(releaseOnlyAction, gamepad.buttonSouth, time: 1, value: 1.0));
Assert.That(pressAndRelease,
Started <PressInteraction>(pressAndReleaseAction, gamepad.buttonSouth, time: 1, value: 1.0)
.AndThen(Performed <PressInteraction>(pressAndReleaseAction, gamepad.buttonSouth, time: 1, duration: 0, value: 1.0)));
pressOnly.Clear();
releaseOnly.Clear();
pressAndRelease.Clear();
runtime.currentTime = 2;
Release(gamepad.buttonSouth);
Assert.That(pressOnly, Canceled <PressInteraction>(pressOnlyAction, gamepad.buttonSouth, value: 0.0, time: 2, duration: 1));
Assert.That(releaseOnly,
Performed <PressInteraction>(releaseOnlyAction, gamepad.buttonSouth, value: 0.0, time: 2, duration: 1)
.AndThen(Canceled <PressInteraction>(releaseOnlyAction, gamepad.buttonSouth, value: 0.0, time: 2, duration: 1)));
Assert.That(pressAndRelease,
Performed <PressInteraction>(pressAndReleaseAction, gamepad.buttonSouth, value: 0.0, time: 2, duration: 1)
.AndThen(Canceled <PressInteraction>(pressAndReleaseAction, gamepad.buttonSouth, value: 0.0, time: 2, duration: 1)));
pressOnly.Clear();
releaseOnly.Clear();
pressAndRelease.Clear();
runtime.currentTime = 5;
Press(gamepad.buttonSouth);
Assert.That(pressOnly,
Started <PressInteraction>(pressOnlyAction, gamepad.buttonSouth, value: 1.0, time: 5)
.AndThen(Performed <PressInteraction>(pressOnlyAction, gamepad.buttonSouth, time: 5, duration: 0, value: 1.0)));
Assert.That(releaseOnly, Started <PressInteraction>(releaseOnlyAction, gamepad.buttonSouth, time: 5, value: 1.0));
Assert.That(pressAndRelease,
Started <PressInteraction>(pressAndReleaseAction, gamepad.buttonSouth, time: 5, value: 1.0)
.AndThen(Performed <PressInteraction>(pressAndReleaseAction, gamepad.buttonSouth, time: 5, duration: 0, value: 1.0)));
}
}
public void Awake()
{
m_ActionTrace = new InputActionTrace();
controls.gameplay.Get().actionTriggered += m_ActionTrace.RecordAction;
}
public void Actions_CanPerformPressInteraction()
{
var gamepad = InputSystem.AddDevice <Gamepad>();
// We add a second input device (and bind to it), to test that the binding
// conflict resolution will not interfere with the interaction handling.
InputSystem.AddDevice <Keyboard>();
// Test all three press behaviors concurrently.
var pressOnlyAction = new InputAction("PressOnly", binding: "<Gamepad>/buttonSouth", interactions: "press");
pressOnlyAction.AddBinding("<Keyboard>/a");
var releaseOnlyAction = new InputAction("ReleaseOnly", binding: "<Gamepad>/buttonSouth", interactions: "press(behavior=1)");
releaseOnlyAction.AddBinding("<Keyboard>/s");
var pressAndReleaseAction = new InputAction("PressAndRelease", binding: "<Gamepad>/buttonSouth", interactions: "press(behavior=2)");
pressAndReleaseAction.AddBinding("<Keyboard>/d");
pressOnlyAction.Enable();
releaseOnlyAction.Enable();
pressAndReleaseAction.Enable();
using (var trace = new InputActionTrace())
{
trace.SubscribeToAll();
runtime.currentTime = 1;
Press(gamepad.buttonSouth);
var actions = trace.ToArray();
Assert.That(actions, Has.Length.EqualTo(5));
Assert.That(actions,
Has.Exactly(1).With.Property("action").SameAs(pressOnlyAction).And.With.Property("phase")
.EqualTo(InputActionPhase.Started).And.With.Property("duration")
.EqualTo(0));
Assert.That(actions,
Has.Exactly(1).With.Property("action").SameAs(pressOnlyAction).And.With.Property("phase")
.EqualTo(InputActionPhase.Performed).And.With.Property("duration")
.EqualTo(0));
Assert.That(actions,
Has.Exactly(1).With.Property("action").SameAs(pressAndReleaseAction).And.With.Property("phase")
.EqualTo(InputActionPhase.Started).And.With.Property("duration")
.EqualTo(0));
Assert.That(actions,
Has.Exactly(1).With.Property("action").SameAs(pressAndReleaseAction).And.With.Property("phase")
.EqualTo(InputActionPhase.Performed).And.With.Property("duration")
.EqualTo(0));
Assert.That(actions,
Has.Exactly(1).With.Property("action").SameAs(releaseOnlyAction).And.With.Property("phase")
.EqualTo(InputActionPhase.Started).And.With.Property("duration")
.EqualTo(0));
trace.Clear();
runtime.currentTime = 2;
Release(gamepad.buttonSouth);
actions = trace.ToArray();
Assert.That(actions, Has.Length.EqualTo(3));
Assert.That(actions,
Has.Exactly(1).With.Property("action").SameAs(releaseOnlyAction).And.With.Property("phase")
.EqualTo(InputActionPhase.Performed).And.With.Property("duration")
.EqualTo(1));
Assert.That(actions,
Has.Exactly(1).With.Property("action").SameAs(pressAndReleaseAction).And.With.Property("phase")
.EqualTo(InputActionPhase.Started).And.With.Property("duration")
.EqualTo(0));
Assert.That(actions,
Has.Exactly(1).With.Property("action").SameAs(pressAndReleaseAction).And.With.Property("phase")
.EqualTo(InputActionPhase.Performed).And.With.Property("duration")
.EqualTo(0));
trace.Clear();
runtime.currentTime = 5;
Press(gamepad.buttonSouth);
actions = trace.ToArray();
Assert.That(actions, Has.Length.EqualTo(5));
Assert.That(actions,
Has.Exactly(1).With.Property("action").SameAs(pressOnlyAction).And.With.Property("phase")
.EqualTo(InputActionPhase.Started).And.With.Property("duration")
.EqualTo(0));
Assert.That(actions,
Has.Exactly(1).With.Property("action").SameAs(pressOnlyAction).And.With.Property("phase")
.EqualTo(InputActionPhase.Performed).And.With.Property("duration")
.EqualTo(0));
Assert.That(actions,
Has.Exactly(1).With.Property("action").SameAs(pressAndReleaseAction).And.With.Property("phase")
.EqualTo(InputActionPhase.Started).And.With.Property("duration")
.EqualTo(0));
Assert.That(actions,
Has.Exactly(1).With.Property("action").SameAs(pressAndReleaseAction).And.With.Property("phase")
.EqualTo(InputActionPhase.Performed).And.With.Property("duration")
.EqualTo(0));
Assert.That(actions,
Has.Exactly(1).With.Property("action").SameAs(releaseOnlyAction).And.With.Property("phase")
.EqualTo(InputActionPhase.Started).And.With.Property("duration")
.EqualTo(0));
}
}
public void StartedValidSweepBehavior(SectorInteraction.SweepBehavior sweepBehavior)
{
var gamepad = InputSystem.InputSystem.AddDevice <Gamepad>();
var action = new InputAction(
type: InputActionType.Value,
binding: "<Gamepad>/rightStick",
interactions: CreateInteractionString(SectorInteraction.Directions.North, sweepBehavior));
action.Enable();
var north = new Vector2(0f, 1f);
var east = new Vector2(1f, 0f);
var center = Vector2.zero;
// Starting below threshold
Assert.That(gamepad.rightStick.IsActuated(), Is.False);
Assert.That(action.triggered, Is.False);
using (var trace = new InputActionTrace())
{
trace.SubscribeToAll();
// Actuate above threshold, in valid sector
Set(gamepad.rightStick, north);
Assert.That(gamepad.rightStick.IsActuated(), Is.True);
Assert.That(trace, Started <SectorInteraction>(action).AndThen(Performed <SectorInteraction>(action)));
Assert.That(action.triggered, Is.True);
trace.Clear();
// Sweep to invalid sector
Set(gamepad.rightStick, east);
Assert.That(gamepad.rightStick.IsActuated(), Is.True);
switch (sweepBehavior)
{
case SectorInteraction.SweepBehavior.Locked:
Assert.That(trace, Is.Empty);
break;
case SectorInteraction.SweepBehavior.AllowReentry:
case SectorInteraction.SweepBehavior.DisallowReentry:
case SectorInteraction.SweepBehavior.HistoryIndependent:
Assert.That(trace, Canceled <SectorInteraction>(action));
break;
default:
Assert.Fail($"Unhandled {nameof(SectorInteraction.SweepBehavior)}={sweepBehavior}");
return;
}
Assert.That(action.triggered, Is.False);
trace.Clear();
// Sweep back into valid sector
Set(gamepad.rightStick, north);
Assert.That(gamepad.rightStick.IsActuated(), Is.True);
switch (sweepBehavior)
{
case SectorInteraction.SweepBehavior.Locked:
case SectorInteraction.SweepBehavior.DisallowReentry:
Assert.That(trace, Is.Empty);
Assert.That(action.triggered, Is.False);
break;
case SectorInteraction.SweepBehavior.AllowReentry:
case SectorInteraction.SweepBehavior.HistoryIndependent:
Assert.That(trace, Started <SectorInteraction>(action).AndThen(Performed <SectorInteraction>(action)));
Assert.That(action.triggered, Is.True);
break;
default:
Assert.Fail($"Unhandled {nameof(SectorInteraction.SweepBehavior)}={sweepBehavior}");
return;
}
trace.Clear();
// Return to center, under threshold
Set(gamepad.rightStick, center);
Assert.That(gamepad.rightStick.IsActuated(), Is.False);
Assert.That(trace, Canceled <SectorInteraction>(action));
Assert.That(action.triggered, Is.False);
}
}
