public void CreateXbimFacetedSolidFromIfcRectangleHollowProfileDef()
{
using (var m = XbimModel.CreateTemporaryModel())
{
using (var txn = m.BeginTransaction())
{
var profile = IfcModelBuilder.MakeRectangleHollowProfileDef(m, 20, 10, 1);
var extrude = IfcModelBuilder.MakeExtrudedAreaSolid(m, profile, 40);
var solid = XbimGeometryCreator.CreateSolid(extrude);
var faceted = XbimGeometryCreator.CreateFacetedSolid(solid, m.ModelFactors.Precision, m.ModelFactors.DeflectionTolerance);
foreach (var face in faceted.Faces)
{
Assert.IsTrue(face.OuterBound.Edges.Count == 4, "Each face should have four outer edges");
}
int hasInnerCount = 0;
foreach (var face in faceted.Faces)
{
if (face.InnerBounds.Count == 1)
{
hasInnerCount++;
Assert.IsTrue(face.InnerBounds.First.Edges.Count == 4, "Each face should have four inner edges");
}
}
Assert.IsTrue(hasInnerCount == 2, "There should be two faces with an innerbound");
Assert.IsTrue(faceted.Shells.Count == 1, "Should only be one shell");
Assert.IsTrue(faceted.Vertices.Count == faceted.Shells.First.Vertices.Count, "Should be one shell with the same number of vertices");
}
}
}
public void SectionFacetedSolidFromCylinderTest()
{
using (var m = XbimModel.CreateTemporaryModel())
{
using (var txn = m.BeginTransaction())
{
var cylinder = IfcModelBuilder.MakeRightCircularCylinder(m, 20, 20);
var solid = XbimGeometryCreator.CreateSolid(cylinder);
var faceted1 = XbimGeometryCreator.CreateFacetedSolid(solid, m.ModelFactors.Precision, m.ModelFactors.DeflectionTolerance);
IfcPlane plane = IfcModelBuilder.MakePlane(m, new XbimPoint3D(cylinder.Position.Location.X + 1, cylinder.Position.Location.Y, cylinder.Position.Location.Z), new XbimVector3D(0, -1, 0), new XbimVector3D(1, 0, 0));
var cutPlane = XbimGeometryCreator.CreateFace(plane);
var section = faceted1.Section(cutPlane, m.ModelFactors.PrecisionBoolean);
Assert.IsTrue(section.First != null, "Result should be a face");
Assert.IsTrue(section.First.OuterBound.Edges.Count == 4, "4 edges are required for this section of a cylinder");
//repeat with section through cylinder
plane = IfcModelBuilder.MakePlane(m, new XbimPoint3D(cylinder.Position.Location.X, cylinder.Position.Location.Y, cylinder.Position.Location.Z + 1), new XbimVector3D(0, 0, 1), new XbimVector3D(1, 0, 0));
cutPlane = XbimGeometryCreator.CreateFace(plane);
section = faceted1.Section(cutPlane, m.ModelFactors.PrecisionBoolean);
Assert.IsTrue(section.First != null, "Result should be a face");
Assert.IsTrue(Math.Abs(section.First.Area - Math.PI * 20 * 20) < 5, "Area of cylinder seems incorrect");
Assert.IsTrue(section.First.InnerBounds.Count == 0, "0 inner wires are required for this section of a cylinder");
}
}
}
public void IntersectFacetedSolidFromFacetedSolid()
{
using (var m = XbimModel.CreateTemporaryModel())
{
using (var txn = m.BeginTransaction())
{
var ifcBlock1 = IfcModelBuilder.MakeBlock(m, 1000, 2000, 3000);
var ifcBlock2 = IfcModelBuilder.MakeBlock(m, 200, 200, 3000);
var ifcBlock3 = IfcModelBuilder.MakeBlock(m, 200, 200, 3000);
ifcBlock2.Position.Location.X -= 180;
ifcBlock2.Position.Location.Y += 200;
ifcBlock3.Position.Location.X -= 180;
ifcBlock3.Position.Location.Y += 600;
var solid1 = XbimGeometryCreator.CreateSolid(ifcBlock1);
var solid2 = XbimGeometryCreator.CreateSolid(ifcBlock2);
var faceted1 = XbimGeometryCreator.CreateFacetedSolid(XbimGeometryCreator.CreateSolid(ifcBlock3), m.ModelFactors.Precision, m.ModelFactors.DeflectionTolerance);
var geom1 = solid1.Union(solid2, m.ModelFactors.Precision);
var solidSet = (IXbimSolidSet)geom1;
Assert.IsTrue(solidSet.Count == 1, "Cutting these two solids should return a single solid");
var faceted2 = XbimGeometryCreator.CreateFacetedSolid(solidSet.First, m.ModelFactors.Precision, m.ModelFactors.DeflectionTolerance);
var geom2 = faceted2.Intersection(faceted1, m.ModelFactors.Precision);
solidSet = (IXbimSolidSet)geom2;
Assert.IsTrue(solidSet.Count == 1, "Cutting these two solids should return a single solid");
var faceted3 = solidSet.First;
var solid6 = XbimGeometryCreator.CreateSolid(faceted3);
//var w = new XbimOccWriter();
//w.Write(solid6, "d:\\xbim\\s");
Assert.IsTrue(Math.Abs(solid6.BoundingBox.SizeX - 20) < m.ModelFactors.Precision * 3, "BoundingBox size X error");
Assert.IsTrue(Math.Abs(solid6.BoundingBox.SizeY - 200) < m.ModelFactors.Precision * 3, "BoundingBox size Y error");
Assert.IsTrue(Math.Abs(solid6.BoundingBox.SizeZ - 3000) < m.ModelFactors.Precision * 3, "BoundingBox size Z error");
Assert.IsTrue(Math.Abs(solid6.Volume - 20 * 3000 * 200) <= m.ModelFactors.Precision, "Error in volume calc");
}
}
}
public void CutFacetedSolidFromFacetedSolid()
{
using (var m = XbimModel.CreateTemporaryModel())
{
using (var txn = m.BeginTransaction())
{
IfcBlock ifcBlock1 = IfcModelBuilder.MakeBlock(m, 1000, 2000, 3000);
IfcBlock ifcBlock2 = IfcModelBuilder.MakeBlock(m, 200, 200, 3000);
IfcBlock ifcBlock3 = IfcModelBuilder.MakeBlock(m, 200, 200, 3000);
ifcBlock2.Position.Location.X += 200;
ifcBlock2.Position.Location.Y += 200;
ifcBlock3.Position.Location.X += 200;
ifcBlock3.Position.Location.Y += 600;
var solid1 = XbimGeometryCreator.CreateSolid(ifcBlock1);
var solid2 = XbimGeometryCreator.CreateSolid(ifcBlock2);
var faceted1 = XbimGeometryCreator.CreateFacetedSolid(XbimGeometryCreator.CreateSolid(ifcBlock3), m.ModelFactors.Precision, m.ModelFactors.DeflectionTolerance);
var geom1 = solid1.Cut(solid2, m.ModelFactors.Precision);
var solidSet = (IXbimSolidSet)geom1;
Assert.IsTrue(solidSet.Count == 1, "Cutting these two solids should return a single solid");
var faceted2 = XbimGeometryCreator.CreateFacetedSolid(solidSet.First, m.ModelFactors.Precision, m.ModelFactors.DeflectionTolerance);
var geom2 = faceted2.Cut(faceted1, m.ModelFactors.Precision);
solidSet = (IXbimSolidSet)geom2;
Assert.IsTrue(solidSet.Count == 1, "Cutting these two solids should return a single solid");
var faceted3 = solidSet.First;
var solid6 = XbimGeometryCreator.CreateSolid(faceted3);
Assert.IsTrue(Math.Abs(solid1.BoundingBox.SizeX - solid6.BoundingBox.SizeX) < m.ModelFactors.Precision * 3, "BoundingBox size X error");
Assert.IsTrue(Math.Abs(solid1.BoundingBox.SizeY - solid6.BoundingBox.SizeY) < m.ModelFactors.Precision * 3, "BoundingBox size Y error");
Assert.IsTrue(Math.Abs(solid1.BoundingBox.SizeZ - solid6.BoundingBox.SizeZ) < m.ModelFactors.Precision * 3, "BoundingBox size Z error");
Assert.IsTrue(Math.Abs(solid6.Volume - faceted3.Volume) <= m.ModelFactors.Precision, "Error in volume calc");
Assert.IsTrue(Math.Abs(solid6.Volume - faceted3.Volume) <= m.ModelFactors.Precision, "Error in volume calc");
}
}
}
public void CreateXbimFacetedSolidFromIfcRightCircularCylinder()
{
using (var m = XbimModel.CreateTemporaryModel())
{
using (var txn = m.BeginTransaction())
{
var cylinder = IfcModelBuilder.MakeRightCircularCylinder(m, 1, 4); //1 metre by 4 metre
var solid = XbimGeometryCreator.CreateSolid(cylinder);
var faceted = XbimGeometryCreator.CreateFacetedSolid(solid, m.ModelFactors.Precision, m.ModelFactors.DeflectionTolerance);
}
}
}
public void CreateXbimFacetedSolidFromIfcBlock()
{
using (var m = XbimModel.CreateTemporaryModel())
{
using (var txn = m.BeginTransaction())
{
var ifcBlock = IfcModelBuilder.MakeBlock(m, 1000, 2000, 3000);
var solid = XbimGeometryCreator.CreateSolid(ifcBlock);
var faceted = XbimGeometryCreator.CreateFacetedSolid(solid, m.ModelFactors.Precision, m.ModelFactors.DeflectionTolerance);
Assert.IsTrue(faceted.Faces.First.OuterBound.Edges.Count == 4, "Should have four edges");
Assert.IsTrue(faceted.Vertices.Count == 8, "there should be 8 points in a block");
Assert.IsTrue(Math.Abs(faceted.BoundingBox.SizeX - 1000) <= m.ModelFactors.Precision, "Error in X value");
Assert.IsTrue(Math.Abs(faceted.BoundingBox.SizeY - 2000) <= m.ModelFactors.Precision, "Error in Y value");
Assert.IsTrue(Math.Abs(faceted.BoundingBox.SizeZ - 3000) <= m.ModelFactors.Precision, "Error in Z value");
Assert.IsTrue(Math.Abs(solid.Volume - faceted.Volume) <= m.ModelFactors.Precision, "Error in volume calc");
}
}
}
public void ReadWriteTriangulationOfNonPlanarSolidTest()
{
using (var m = XbimModel.CreateTemporaryModel())
{
using (var txn = m.BeginTransaction())
{
var profile = IfcModelBuilder.MakeCircleHollowProfileDef(m, 20, 1);
var extrude = IfcModelBuilder.MakeExtrudedAreaSolid(m, profile, 40);
var solid = XbimGeometryCreator.CreateSolid(extrude);
TextWriter tw = new StringWriter();
XbimGeometryCreator.WriteTriangulation(tw, solid, m.ModelFactors.Precision, m.ModelFactors.DeflectionTolerance, 0.5);
TextReader tr = new StringReader(tw.ToString());
IXbimGeometryObject geom = XbimGeometryCreator.ReadTriangulation(tr);
var triangulatedSold = geom as IXbimSolid;
Assert.IsNotNull(triangulatedSold, "Invalid solid returned");
Assert.IsTrue(Math.Abs(solid.Volume - triangulatedSold.Volume) < 5, "Volume differs too much");
}
}
}
public void ConvertXbimSolidFromXbimFacetedSolidPlanarTest()
{
using (var m = XbimModel.CreateTemporaryModel())
{
using (var txn = m.BeginTransaction())
{
var profile = IfcModelBuilder.MakeRectangleHollowProfileDef(m, 20, 10, 1);
var extrude = IfcModelBuilder.MakeExtrudedAreaSolid(m, profile, 40);
var solid = XbimGeometryCreator.CreateSolid(extrude);
var faceted = XbimGeometryCreator.CreateFacetedSolid(solid, m.ModelFactors.Precision,
m.ModelFactors.DeflectionTolerance);
var solid2 = XbimGeometryCreator.CreateSolid(faceted);
Assert.IsTrue(solid.Shells.Count == solid2.Shells.Count, "Shell count differs");
Assert.IsTrue(solid.Faces.Count == solid2.Faces.Count, "Face count differs");
Assert.IsTrue(solid.Edges.Count == solid2.Edges.Count, "Edge count differs");
Assert.IsTrue(solid.Vertices.Count == solid2.Vertices.Count, "Vertex count differs");
Assert.IsTrue(Math.Abs(solid.Volume - solid2.Volume) < 0.001, "Volume differs");
}
}
}
public void BooleanPerformanceTest()
{
using (var m = XbimModel.CreateTemporaryModel())
{
using (var txn = m.BeginTransaction())
{
var ifcBlock1 = IfcModelBuilder.MakeBlock(m, 1000, 2000, 3000);
var ifcBlock2 = IfcModelBuilder.MakeBlock(m, 200, 200, 3000);
//var ifcBlock1 = IfcModelBuilder.MakeRightCircularCylinder(m, 2000, 3000);
//var ifcBlock2 = IfcModelBuilder.MakeRightCircularCylinder(m, 2000, 3000);
//var ifcBlock1 = IfcModelBuilder.MakeExtrudedAreaSolid(m, IfcModelBuilder.MakeRectangleHollowProfileDef(m, 2000, 3000, 500), 4000);
//var ifcBlock2 = IfcModelBuilder.MakeExtrudedAreaSolid(m, IfcModelBuilder.MakeRectangleHollowProfileDef(m, 2000, 3000, 500), 4000);
ifcBlock2.Position.Location.X -= 180;
ifcBlock2.Position.Location.Y += 200;
var solid1 = XbimGeometryCreator.CreateSolid(ifcBlock1);
var solid2 = XbimGeometryCreator.CreateSolid(ifcBlock2);
var faceted1 = XbimGeometryCreator.CreateFacetedSolid(XbimGeometryCreator.CreateSolid(ifcBlock1), m.ModelFactors.Precision, m.ModelFactors.DeflectionTolerance, 1);
var faceted2 = XbimGeometryCreator.CreateFacetedSolid(XbimGeometryCreator.CreateSolid(ifcBlock2), m.ModelFactors.Precision, m.ModelFactors.DeflectionTolerance, 1);
var solid3 = solid1.Cut(solid2, m.ModelFactors.Precision);
solid3 = faceted1.Cut(faceted2, m.ModelFactors.Precision);
var sw = new Stopwatch();
sw.Start();
for (int i = 0; i < 10; i++)
{
solid3 = solid1.Cut(solid2, m.ModelFactors.Precision);
}
double time1 = sw.ElapsedMilliseconds;
sw.Restart();
for (int i = 0; i < 10; i++)
{
solid3 = faceted1.Cut(faceted2, m.ModelFactors.Precision);
}
double time2 = sw.ElapsedMilliseconds;
Assert.IsTrue(time2 < time1, "Performance error");
}
}
}
public void SectionFacetedSolidFromBlockTest()
{
using (var m = XbimModel.CreateTemporaryModel())
{
using (var txn = m.BeginTransaction())
{
var block = IfcModelBuilder.MakeBlock(m, 10, 15, 20);
var solid = XbimGeometryCreator.CreateSolid(block);
var faceted1 = XbimGeometryCreator.CreateFacetedSolid(solid, m.ModelFactors.Precision, m.ModelFactors.DeflectionTolerance);
IfcPlane plane = IfcModelBuilder.MakePlane(m, new XbimPoint3D(block.Position.Location.X + 5, block.Position.Location.Y, block.Position.Location.Z), new XbimVector3D(-1, 0, 0), new XbimVector3D(0, 1, 0));
var cutPlane = XbimGeometryCreator.CreateFace(plane);
var section = faceted1.Section(cutPlane, m.ModelFactors.PrecisionBoolean);
if (section.First == null)
{
Assert.IsTrue(section.First != null, "Result should be a single face");
Assert.IsTrue(section.First.OuterBound.Edges.Count == 4, "4 edges are required of a section of a block");
}
}
}
}
