protected BbArbitraryProfile()
{
ifcArbitraryClosedProfileDef = new IfcArbitraryClosedProfileDef
{
ProfileType = IfcProfileTypeEnum.AREA,
};
}
public static IfcArbitraryClosedProfileDef CreateTestCase(this IfcArbitraryClosedProfileDef pf)
{
IfcArbitraryClosedProfileDef profile = new IfcArbitraryClosedProfileDef()
{
OuterCurve = new IfcCompositeCurve().CreateOuterCurveTestCase()
};
return profile;
}
private IfcBeam GenerateIPE200(STPModelData md,IfcBuilding building,bool tessellated)
{
if (tessellated)
{
List<Point3d> coords = new List<Point3d>() { new Point3d(1000.0, 50.0, -91.5), new Point3d(1000.0, 14.8, -91.5), new Point3d(1000.0, 50.0, -100.0), new Point3d(1000.0, -50.0, -100.0), new Point3d(1000.0, -50.0, -91.5), new Point3d(1000.0, -14.8, -91.5), new Point3d(1000.0, -2.8, 79.5), new Point3d(1000.0, -2.8, -79.5), new Point3d(1000.0, -50.0, 91.5), new Point3d(1000.0, -14.8, 91.5), new Point3d(1000.0, -50.0, 100.0), new Point3d(1000.0, 50.0, 100.0), new Point3d(1000.0, 50.0, 91.5), new Point3d(1000.0, 14.8, 91.5), new Point3d(1000.0, 2.8, -79.5), new Point3d(1000.0, 2.8, 79.5), new Point3d(0.0, 2.8, 79.5), new Point3d(0.0, 2.8, -79.5), new Point3d(0.0, 50.0, 91.5), new Point3d(0.0, 14.8, 91.5), new Point3d(0.0, 50.0, 100.0), new Point3d(0.0, -50.0, 100.0), new Point3d(0.0, -50.0, 91.5), new Point3d(0.0, -14.8, 91.5), new Point3d(0.0, -2.8, -79.5), new Point3d(0.0, -2.8, 79.5), new Point3d(0.0, -50.0, -91.5), new Point3d(0.0, -14.8, -91.5), new Point3d(0.0, -50.0, -100.0), new Point3d(0.0, 50.0, -100.0), new Point3d(0.0, 50.0, -91.5), new Point3d(0.0, 14.8, -91.5), new Point3d(0.0, 14.8, -91.5), new Point3d(0.0, 2.8, -79.5), new Point3d(1000.0, 14.8, -91.5), new Point3d(1000.0, 2.8, -79.5), new Point3d(500.0, 2.8, -79.5), new Point3d(500.0, 14.8, -91.5), new Point3d(0.0, 2.8, -79.5), new Point3d(0.0, 2.8, 79.5), new Point3d(1000.0, 2.8, -79.5), new Point3d(1000.0, 2.8, 79.5), new Point3d(500.0, 2.8, -79.5), new Point3d(500.0, 2.8, 79.5), new Point3d(0.0, 2.8, 79.5), new Point3d(0.0, 14.8, 91.5), new Point3d(1000.0, 2.8, 79.5), new Point3d(1000.0, 14.8, 91.5), new Point3d(500.0, 2.8, 79.5), new Point3d(500.0, 14.8, 91.5), new Point3d(0.0, 14.8, 91.5), new Point3d(0.0, 50.0, 91.5), new Point3d(1000.0, 14.8, 91.5), new Point3d(1000.0, 50.0, 91.5), new Point3d(500.0, 14.8, 91.5), new Point3d(500.0, 50.0, 91.5), new Point3d(0.0, 50.0, 91.5), new Point3d(0.0, 50.0, 100.0), new Point3d(1000.0, 50.0, 91.5), new Point3d(1000.0, 50.0, 100.0), new Point3d(500.0, 50.0, 91.5), new Point3d(500.0, 50.0, 100.0), new Point3d(0.0, 50.0, 100.0), new Point3d(0.0, -50.0, 100.0), new Point3d(1000.0, 50.0, 100.0), new Point3d(1000.0, -50.0, 100.0), new Point3d(500.0, 50.0, 100.0), new Point3d(500.0, -50.0, 100.0), new Point3d(0.0, -50.0, 100.0), new Point3d(0.0, -50.0, 91.5), new Point3d(1000.0, -50.0, 100.0), new Point3d(1000.0, -50.0, 91.5), new Point3d(500.0, -50.0, 100.0), new Point3d(500.0, -50.0, 91.5), new Point3d(0.0, -50.0, 91.5), new Point3d(0.0, -14.8, 91.5), new Point3d(1000.0, -50.0, 91.5), new Point3d(1000.0, -14.8, 91.5), new Point3d(500.0, -50.0, 91.5), new Point3d(500.0, -14.8, 91.5), new Point3d(0.0, -14.8, 91.5), new Point3d(0.0, -2.8, 79.5), new Point3d(1000.0, -14.8, 91.5), new Point3d(1000.0, -2.8, 79.5), new Point3d(500.0, -14.8, 91.5), new Point3d(500.0, -2.8, 79.5), new Point3d(0.0, -2.8, 79.5), new Point3d(0.0, -2.8, -79.5), new Point3d(1000.0, -2.8, 79.5), new Point3d(1000.0, -2.8, -79.5), new Point3d(500.0, -2.8, 79.5), new Point3d(500.0, -2.8, -79.5), new Point3d(0.0, -2.8, -79.5), new Point3d(0.0, -14.8, -91.5), new Point3d(1000.0, -2.8, -79.5), new Point3d(1000.0, -14.8, -91.5), new Point3d(500.0, -2.8, -79.5), new Point3d(500.0, -14.8, -91.5), new Point3d(0.0, -14.8, -91.5), new Point3d(0.0, -50.0, -91.5), new Point3d(1000.0, -14.8, -91.5), new Point3d(1000.0, -50.0, -91.5), new Point3d(500.0, -14.8, -91.5), new Point3d(500.0, -50.0, -91.5), new Point3d(0.0, -50.0, -91.5), new Point3d(0.0, -50.0, -100.0), new Point3d(1000.0, -50.0, -91.5), new Point3d(1000.0, -50.0, -100.0), new Point3d(500.0, -50.0, -91.5), new Point3d(500.0, -50.0, -100.0), new Point3d(0.0, -50.0, -100.0), new Point3d(0.0, 50.0, -100.0), new Point3d(1000.0, -50.0, -100.0), new Point3d(1000.0, 50.0, -100.0), new Point3d(500.0, -50.0, -100.0), new Point3d(500.0, 50.0, -100.0), new Point3d(0.0, 50.0, -100.0), new Point3d(0.0, 50.0, -91.5), new Point3d(1000.0, 50.0, -100.0), new Point3d(1000.0, 50.0, -91.5), new Point3d(500.0, 50.0, -100.0), new Point3d(500.0, 50.0, -91.5), new Point3d(0.0, 50.0, -91.5), new Point3d(0.0, 14.8, -91.5), new Point3d(1000.0, 50.0, -91.5), new Point3d(1000.0, 14.8, -91.5), new Point3d(500.0, 50.0, -91.5), new Point3d(500.0, 14.8, -91.5) };
IfcCartesianPointList3D cartesianPointList3D = new IfcCartesianPointList3D(md, coords);
cartesianPointList3D.Comments.Add("the geometric representation of the beam is provided as a triangulated face set");
cartesianPointList3D.Comments.Add("the meshing depends on the creating software system");
List<CoordIndex> coordIndex = new List<CoordIndex>() { new CoordIndex(6, 5, 4), new CoordIndex(15, 8, 6), new CoordIndex(6, 4, 3), new CoordIndex(10, 11, 9), new CoordIndex(16, 10, 7), new CoordIndex(14, 11, 10), new CoordIndex(7, 8, 16), new CoordIndex(6, 2, 15), new CoordIndex(2, 3, 1), new CoordIndex(3, 2, 6), new CoordIndex(10, 16, 14), new CoordIndex(14, 13, 12), new CoordIndex(11, 14, 12), new CoordIndex(8, 15, 16), new CoordIndex(24, 23, 22), new CoordIndex(17, 26, 24), new CoordIndex(22, 21, 20), new CoordIndex(28, 29, 27), new CoordIndex(32, 28, 25), new CoordIndex(30, 29, 28), new CoordIndex(18, 25, 26), new CoordIndex(24, 20, 17), new CoordIndex(20, 21, 19), new CoordIndex(32, 31, 30), new CoordIndex(28, 32, 30), new CoordIndex(33, 34, 37), new CoordIndex(36, 35, 38), new CoordIndex(40, 44, 43), new CoordIndex(41, 43, 44), new CoordIndex(46, 50, 49), new CoordIndex(47, 49, 50), new CoordIndex(56, 55, 51), new CoordIndex(55, 56, 54), new CoordIndex(57, 58, 62), new CoordIndex(60, 59, 61), new CoordIndex(63, 64, 68), new CoordIndex(66, 65, 67), new CoordIndex(69, 70, 74), new CoordIndex(72, 71, 73), new CoordIndex(80, 79, 75), new CoordIndex(79, 80, 78), new CoordIndex(81, 82, 86), new CoordIndex(84, 83, 85), new CoordIndex(88, 92, 91), new CoordIndex(89, 91, 92), new CoordIndex(94, 98, 97), new CoordIndex(95, 97, 98), new CoordIndex(104, 103, 99), new CoordIndex(103, 104, 102), new CoordIndex(105, 106, 110), new CoordIndex(108, 107, 109), new CoordIndex(111, 112, 116), new CoordIndex(114, 113, 115), new CoordIndex(117, 118, 122), new CoordIndex(120, 119, 121), new CoordIndex(128, 127, 123), new CoordIndex(127, 128, 126), new CoordIndex(22, 20, 24), new CoordIndex(32, 25, 18), new CoordIndex(18, 26, 17), new CoordIndex(33, 37, 38), new CoordIndex(36, 38, 37), new CoordIndex(40, 43, 39), new CoordIndex(41, 44, 42), new CoordIndex(46, 49, 45), new CoordIndex(47, 50, 48), new CoordIndex(56, 51, 52), new CoordIndex(55, 54, 53), new CoordIndex(57, 62, 61), new CoordIndex(60, 61, 62), new CoordIndex(63, 68, 67), new CoordIndex(66, 67, 68), new CoordIndex(69, 74, 73), new CoordIndex(72, 73, 74), new CoordIndex(80, 75, 76), new CoordIndex(79, 78, 77), new CoordIndex(81, 86, 85), new CoordIndex(84, 85, 86), new CoordIndex(88, 91, 87), new CoordIndex(89, 92, 90), new CoordIndex(94, 97, 93), new CoordIndex(95, 98, 96), new CoordIndex(104, 99, 100), new CoordIndex(103, 102, 101), new CoordIndex(105, 110, 109), new CoordIndex(108, 109, 110), new CoordIndex(111, 116, 115), new CoordIndex(114, 115, 116), new CoordIndex(117, 122, 121), new CoordIndex(120, 121, 122), new CoordIndex(128, 123, 124), new CoordIndex(127, 126, 125) };
IfcTriangulatedFaceSet triangulatedFaceSet = new IfcTriangulatedFaceSet(md, cartesianPointList3D, null, true, coordIndex, null);
return new IfcBeam(building, triangulatedFaceSet) { GlobalId = "0EF5_zZRv0pQPddeofU3KT", Name = "ExampleBeamName",Description = "ExampleBeamDescription",Tag = "Tag" };
}
List<Point3d> points = new List<Point3d>() {new Point3d(2.8,-79.5,0),new Point3d(2.8,79.5,0),new Point3d(6.314719,87.985281,0),new Point3d(14.8,91.5,0),new Point3d(50.0,91.5,0),new Point3d(50.0,100.0,0),new Point3d(-50.0,100.0,0),new Point3d(-50.0,91.5,0),new Point3d(-14.8,91.5,0),new Point3d(-6.314719,87.985281,0),new Point3d(-2.8,79.5,0),new Point3d(-2.8,-79.5,0),new Point3d(-6.314719,-87.985281,0),new Point3d(-14.8,-91.5,0),new Point3d(-50.0,-91.5,0),new Point3d(-50.0,-100.0,0),new Point3d(50.0,-100.0,0),new Point3d(50.0,-91.5,0),new Point3d(14.8,-91.5,0),new Point3d(6.314719,-87.985281,0) };
PolyCurve pc = new PolyCurve();
pc.Append(new Line(points[0],points[1]));
pc.Append(new Arc(points[1],points[2],points[3]));
pc.Append(new Line(points[3],points[4]));
pc.Append(new Line(points[4],points[5]));
pc.Append(new Line(points[5],points[6]));
pc.Append(new Line(points[6],points[7]));
pc.Append(new Line(points[7],points[8]));
pc.Append(new Arc(points[8],points[9],points[10]));
pc.Append(new Line(points[10],points[11]));
pc.Append(new Arc(points[11],points[12],points[13]));
pc.Append(new Line(points[13], points[14]));
pc.Append(new Line(points[14], points[15]));
pc.Append(new Line(points[15], points[16]));
pc.Append(new Line(points[16], points[17]));
pc.Append(new Line(points[17], points[18]));
pc.Append(new Arc(points[18],points[19],points[0]));
IfcBoundedCurve boundedCurve = IfcBoundedCurve.ConvertCurve(md, pc);
IfcArbitraryClosedProfileDef arbitraryClosedProfileDef = new IfcArbitraryClosedProfileDef("IPE200",boundedCurve);
IfcAxis2Placement3D axis2Placement3D = new IfcAxis2Placement3D(new IfcCartesianPoint(md,0,0,0),new IfcDirection(md,0,1,0),new IfcDirection(md,1,0,0));
IfcExtrudedAreaSolid extrudedAreaSolid = new IfcExtrudedAreaSolid(arbitraryClosedProfileDef, axis2Placement3D,new IfcDirection(md,0,0,1),1000);
return new IfcBeam(building, extrudedAreaSolid) { GlobalId = "0EF5_zZRv0pQPddeofU3KT", Name = "ExampleBeamName",Description = "ExampleBeamDescription", Tag = "Tag" };
}
public BbSlottedHoleProfile(double cToCDistance, double radius)
{
var cir1 = new IfcCircle
{
Position = new IfcAxis2Placement
{
Value = new IfcAxis2Placement2D
{
Location = new IfcCartesianPoint(cToCDistance / 2.0, 0),
},
},
Radius = radius,
};
var trimmed1 = new IfcTrimmedCurve
{
BasisCurve = cir1,
Trim1 = new List<IfcTrimmingSelect>{new IfcTrimmingSelect{Value = new IfcParameterValue{Value = 270}}},
Trim2 = new List<IfcTrimmingSelect> { new IfcTrimmingSelect { Value = new IfcParameterValue { Value = 90 } } },
SenseAgreement = true,
MasterRepresentation = IfcTrimmingPreference.PARAMETER,
};
var line1 = new IfcPolyline
{
Points = new List<IfcCartesianPoint>
{
new IfcCartesianPoint(cToCDistance / 2.0, radius),
new IfcCartesianPoint(cToCDistance / -2.0, radius),
},
};
var cir2 = new IfcCircle
{
Position = new IfcAxis2Placement
{
Value = new IfcAxis2Placement2D
{
Location = new IfcCartesianPoint(cToCDistance / -2.0, 0),
},
},
Radius = radius,
};
var trimmed2 = new IfcTrimmedCurve
{
BasisCurve = cir2,
Trim1 = new List<IfcTrimmingSelect> { new IfcTrimmingSelect { Value = new IfcParameterValue { Value = 90 } } },
Trim2 = new List<IfcTrimmingSelect> { new IfcTrimmingSelect { Value = new IfcParameterValue { Value = 270 } } },
SenseAgreement = true,
MasterRepresentation = IfcTrimmingPreference.PARAMETER,
};
var line2 = new IfcPolyline
{
Points = new List<IfcCartesianPoint>
{
new IfcCartesianPoint(cToCDistance / -2.0, -radius),
new IfcCartesianPoint(cToCDistance / 2.0, -radius),
},
};
var seg1 = new IfcCompositeCurveSegment
{
Transition = IfcTransitionCode.CONTSAMEGRADIENTSAMECURVATURE,
SameSense = true,
ParentCurve = trimmed1,
};
var seg2 = new IfcCompositeCurveSegment
{
Transition = IfcTransitionCode.CONTSAMEGRADIENTSAMECURVATURE,
SameSense = true,
ParentCurve = line1,
};
var seg3 = new IfcCompositeCurveSegment
{
Transition = IfcTransitionCode.CONTSAMEGRADIENTSAMECURVATURE,
SameSense = true,
ParentCurve = trimmed2,
};
var seg4 = new IfcCompositeCurveSegment
{
Transition = IfcTransitionCode.CONTSAMEGRADIENTSAMECURVATURE,
SameSense = true,
ParentCurve = line2,
};
var cCurve = new IfcCompositeCurve
{
Segments = new List<IfcCompositeCurveSegment>
{
seg1, seg2, seg3, seg4
},
SelfIntersect = EbInstanceModel.LOGICAL.dbTrue,
};
_ifcProfileDef = new IfcArbitraryClosedProfileDef
{
ProfileType = IfcProfileTypeEnum.AREA,
OuterCurve = cCurve,
};
}
private static ICurve ToCurve(this IfcArbitraryClosedProfileDef profile)
{
return(profile.OuterCurve.ToCurve(true));
}
