private void SetRightRegion()
{
var storyNo = WallPolygon.IfWall.Story.StoryNo;
var height = WallPolygon.IfWall.IfDimension.ZDim;
var dim = IfStud.Setup.Get <IfDimension>("Dimension");
var maxdistance = StudTable.GetSpace(storyNo + 1, height.Inches, dim).LastOrDefault().Spacing;
foreach (var region in WallPolygon.RRight)
{
var spaces = Split.Distance(region.IfDimension.XDim.Inches, Convert.ToDouble(maxdistance) * 0.0254); //to inch
spaces = spaces.Where(e => e > .2).ToList();
spaces.Insert(0, 0);
for (int i = 0; i < spaces.Count; i++)
{
if (i == 0)
{
spaces[i] += 0.05 / 2;
}
;
IfStud ifStud = new IfStud(WallPolygon.IfWall)
{
IfModel = WallPolygon.IfWall.IfModel,
IfWall = WallPolygon.IfWall,
IfLocation =
new IfLocation(region.IfLocation.X + spaces[i],
region.IfLocation.Y,
region.IfLocation.Z),
IfDimension = new IfDimension(
.05f,
.4f,
region.IfDimension.ZDim.Inches),
};
ifStud.New();
ifStud.IfMaterial.AttatchTo(ifStud);
//add to studs elments
IfStuds.Add(ifStud);
}
}
}
private void SetStudsRegions()
{
var storyNo = WallPolygon.IfWall.Story.StoryNo;
double height = 0;
UnitName unit = WallPolygon.IfWall.IfModel.IfUnit.LengthUnit;
height = WallPolygon.IfWall.IfDimension.ZDim.Feet;
//switch (unit)
//{
// case UnitName.MILLIMETRE:
// height = Length.FromMilliMeters(WallPolygon.IfWall.IfDimension.ZDim.MilliMeter).Feet;
// break;
//
// case UnitName.FOOT:
// height = WallPolygon.IfWall.IfDimension.ZDim.Feet;
// break;
// case UnitName.METRE:
// height = Length.FromMeters(WallPolygon.IfWall.IfDimension.ZDim.Meter).Feet;
// break;
// default:
// break;
//}
var dim = IfStud.Setup.Get <IfDimension>("Dimension");
var maxdistance = StudTable.GetSpace(storyNo + 1, height, dim)
.LastOrDefault().Spacing;
// set maxdistance unit
//switch (unit)
//{
// case UnitName.MILLIMETRE:
// maxdistance = Length.FromInches(maxdistance).MilliMeter;
// //dim = dim.ToMilliMeters();
// break;
//
// case UnitName.METRE:
// maxdistance = Length.FromInches(maxdistance).Meter;
// //dim = dim.ToMeters();
// break;
//
// default:
// maxdistance = Length.FromInches(maxdistance).Feet;
// //dim = dim.ToFeet();
// break;
//}
//set Left Region
foreach (var region in WallPolygon.RLeft)
{
double distance = 0;
//switch (unit)
//{
// case UnitName.MILLIMETRE:
// distance = region.IfDimension.XDim.Inches;
// break;
// case UnitName.FOOT:
// distance = region.IfDimension.XDim.Inches;
// break;
// case UnitName.METRE:
// distance = region.IfDimension.XDim.Inches;
// break;
// default:
// break;
//}
distance = region.IfDimension.XDim.Inches;
var spaces = Split.Equal(distance - dim.XDim.Inches, maxdistance);
for (int i = 0; i < spaces.Count; i++)
{
var ifStud = new IfStud(WallPolygon.IfWall)
{
IfModel = WallPolygon.IfWall.IfModel,
IfWall = WallPolygon.IfWall,
IfLocation =
new IfLocation(region.IfLocation.X + spaces[i] + dim.XDim.Inches / 2,
region.IfLocation.Y,
region.IfLocation.Z),
IfDimension = new IfDimension(
dim.XDim,
dim.YDim,
region.IfDimension.ZDim),
IfMaterial = IfMaterial.Setup.Get <IfMaterial>("RLeft"),
};
ifStud.New();
ifStud.IfMaterial.AttatchTo(ifStud);
//add to studs elments
IfStuds.Add(ifStud);
//
}
}
//set right Region
foreach (var region in WallPolygon.RRight)
{
double distance = 0;
switch (unit)
{
case UnitName.MILLIMETRE:
distance = region.IfDimension.XDim.Inches;
break;
case UnitName.FOOT:
distance = region.IfDimension.XDim.Inches;
break;
case UnitName.METRE:
distance = region.IfDimension.XDim.Inches;
break;
default:
break;
}
var spaces = Split.Equal(distance - dim.XDim.Inches, maxdistance);
for (int i = 0; i < spaces.Count; i++)
{
var ifStud = new IfStud(WallPolygon.IfWall)
{
IfModel = WallPolygon.IfWall.IfModel,
IfWall = WallPolygon.IfWall,
IfLocation =
new IfLocation(region.IfLocation.X + spaces[i] + dim.XDim.Inches / 2,
region.IfLocation.Y,
region.IfLocation.Z),
IfDimension = new IfDimension(
dim.XDim,
dim.YDim,
region.IfDimension.ZDim),
IfMaterial = IfMaterial.Setup.Get <IfMaterial>("RRight")
};
ifStud.New();
ifStud.IfMaterial.AttatchTo(ifStud);
//add to studs elments
IfStuds.Add(ifStud);
//
}
}
//set between regions
foreach (var region in WallPolygon.RBetween)
{
double distance = 0;
switch (unit)
{
case UnitName.MILLIMETRE:
distance = region.IfDimension.XDim.Inches;
break;
case UnitName.FOOT:
distance = region.IfDimension.XDim.Inches;
break;
case UnitName.METRE:
distance = region.IfDimension.XDim.Inches;
break;
default:
break;
}
var spaces = Split.Equal(distance - dim.XDim.Inches, maxdistance);
for (int i = 0; i < spaces.Count; i++)
{
var ifStud = new IfStud(WallPolygon.IfWall)
{
IfModel = WallPolygon.IfWall.IfModel,
IfWall = WallPolygon.IfWall,
IfLocation =
new IfLocation(region.IfLocation.X + spaces[i] + dim.XDim.Inches / 2,
region.IfLocation.Y,
region.IfLocation.Z),
IfDimension = new IfDimension(
dim.XDim,
dim.YDim,
region.IfDimension.ZDim),
IfMaterial = IfMaterial.Setup.Get <IfMaterial>("RBetween")
};
ifStud.New();
ifStud.IfMaterial.AttatchTo(ifStud);
//add to studs elments
IfStuds.Add(ifStud);
//
}
}
//set Bottom Region
foreach (var region in WallPolygon.RBottom)
{
double distance = 0;
switch (unit)
{
case UnitName.MILLIMETRE:
distance = region.IfDimension.XDim.Inches;
break;
case UnitName.FOOT:
distance = region.IfDimension.XDim.Inches;
break;
case UnitName.METRE:
distance = region.IfDimension.XDim.Inches;
break;
default:
break;
}
var spaces = Split.Equal(distance - dim.XDim.Inches, maxdistance);
for (int i = 0; i < spaces.Count; i++)
{
var ifStud = new IfStud(WallPolygon.IfWall)
{
IfModel = WallPolygon.IfWall.IfModel,
IfWall = WallPolygon.IfWall,
IfLocation =
new IfLocation(region.IfLocation.X + spaces[i] + dim.XDim.Inches / 2,
region.IfLocation.Y,
region.IfLocation.Z),
IfDimension = new IfDimension(
dim.XDim,
dim.YDim,
region.IfDimension.ZDim),
IfMaterial = IfMaterial.Setup.Get <IfMaterial>("BottomStud")
};
ifStud.New();
ifStud.IfMaterial.AttatchTo(ifStud);
//add to studs elments
IfStuds.Add(ifStud);
//
}
}
//set top region
foreach (var region in WallPolygon.RTop)
{
double distance = 0;
switch (unit)
{
case UnitName.MILLIMETRE:
distance = region.IfDimension.XDim.Inches;
break;
case UnitName.FOOT:
distance = region.IfDimension.XDim.Inches;
break;
case UnitName.METRE:
distance = region.IfDimension.XDim.Inches;
break;
default:
break;
}
var spaces = Split.Equal(distance - dim.XDim.Inches, maxdistance);
for (int i = 0; i < spaces.Count; i++)
{
var ifStud = new IfStud(WallPolygon.IfWall)
{
IfModel = WallPolygon.IfWall.IfModel,
IfWall = WallPolygon.IfWall,
IfLocation =
new IfLocation(region.IfLocation.X + spaces[i] + dim.XDim.Inches / 2,
region.IfLocation.Y,
region.IfLocation.Z),
IfDimension = new IfDimension(
dim.XDim,
dim.YDim,
region.IfDimension.ZDim),
IfMaterial = IfMaterial.Setup.Get <IfMaterial>("TopStud")
};
ifStud.New();
ifStud.IfMaterial.AttatchTo(ifStud);
//add to studs elments
IfStuds.Add(ifStud);
//
}
}
}