public override void SetOverallPropList(string propName, PropertyBasis basis, IEnumerable <double> value)
{
CasterLogger.Debug($"Set property {propName} for overall: {value}");
double[] temp = value as double[] ?? value.ToArray();
_capeThermoMaterial.SetOverallProp(propName, basis.ToString(), value);
//_alreadyFlashed = false;
CasterLogger.Debug($"Set property complete");
}
/// <summary>
/// Calculation method for the CMixerExample110 unit operation.
/// </summary>
/// <remarks>
/// A mixer unit operation combined the material flows from two inlet ports into the flow of a single outlet port.
/// In order to do this calculation, the mixer unit obtains flow information from each inlet port,
/// the adds the flows to obtain the flow of the outlet port. In the case of the mixer below, it is assumed that the
/// components are the same in each material object and that the components are listed in the same order.
/// After the combined flow is calculated at the values set to the outlet port, along with the
/// enthalpy of the stream calculated from an energy balance and the pressure determined from
/// the inlet pressures, the outlet stream can be flahsed to determine equilibrium conditions.
/// The last task is releasing any duplicate material objects obtained.
/// </remarks>
/// <example>
/// <para>An example of how to calculate a unit operation. This method obtains material objects
/// from each of ports using the <see cref = "PortCollection"/> class. The <see cref = "ICapeThermoMaterial"/>
/// interface is used to obtain the names using the CompIds() method, flows of each of the
/// components present in the material object and overall pressure obtained using the
/// <see cref = "ICapeThermoMaterial.GetOverallProp"/> method. The enthaply of
/// each phase in the inlet materials is calculated using <see cref = "ICapeThermoPropertyRoutine.CalcSinglePhaseProp"/>
/// method. The inlet enthalpy was multiplied by the phase flow (phase fraction * overall flow)
/// which was summed to determine the outlet stream enthalpy.
/// The output pressure from the lower of the two streams' pressure and pressure drop parameter.
/// Lastly, the results of the
/// calculations are applied to the output material object using the <see cref = "ICapeThermoMaterial.SetOverallProp"/>
/// method. The last method of the calculate method is to call the material's
/// <see cref = "ICapeThermoEquilibriumRoutine.CalcEquilibrium"/> method.</para>
/// <para>
/// A calculation report is generated by this method that is made avalable through the
/// <see cref = "MixerExample110.ProduceReport"/> method.
/// </para>
/// <para>
/// In this case, the inlet materials need to be released. This is accomplished using the
/// <see cref = "System.Runtime.InteropServices.Marshal.ReleaseComObject"/> method.
/// Using this method to release the outlet material object would result in an null object reference error.
/// </para>
/// <para>
/// The method also documents use of the <see cref = "CapeObjectBase.throwException"/> method to provide
/// CAPE-OPEN compliant error handling.
/// </para>
/// <code>
///protected override void Calculate()
///{
/// this.calcReport = String.Empty;
/// // Log a message using the simulation context (pop-up message commented out.
/// if (this.SimulationContext is CapeOpen.ICapeDiagnostic)
/// ((CapeOpen.ICapeDiagnostic)this.SimulationContext).LogMessage("Starting Mixer Calculation");
/// this.calcReport = String.Concat(this.calcReport, "Starting Mixer Calculation", System.Environment.NewLine);
/// // Get the material Object from Port 0.
/// ICapeThermoMaterial in1 = null;
/// ICapeThermoMaterial in2 = null;
/// ICapeThermoMaterial outlet = null;
/// ICapeThermoMaterial temp = null;
/// String[] compIds1 = null;
/// String[] compIds2 = null;
/// String[] compIds3 = null;
/// String[] forms = null;
/// String[] names = null;
/// double[] bTemps = null;
/// double[] molWts = null;
/// String[] casNos = null;
/// try
/// {
/// temp = (ICapeThermoMaterial)this.Ports[0].connectedObject;
/// in1 = (ICapeThermoMaterial)temp.CreateMaterial();
/// in1.CopyFromMaterial(temp);
/// if (temp.GetType().IsCOMObject) System.Runtime.InteropServices.Marshal.ReleaseComObject(temp);
/// ((CapeOpen.ICapeThermoCompounds)in1).GetCompoundList(ref compIds1, ref forms, ref names, ref bTemps, ref molWts, ref casNos);
/// temp = (ICapeThermoMaterial)this.Ports[1].connectedObject;
/// in2 = (ICapeThermoMaterial)temp.CreateMaterial();
/// in2.CopyFromMaterial(temp);
/// if (temp.GetType().IsCOMObject) System.Runtime.InteropServices.Marshal.FinalReleaseComObject(temp);
/// ((CapeOpen.ICapeThermoCompounds)in2).GetCompoundList(ref compIds2, ref forms, ref names, ref bTemps, ref molWts, ref casNos);
/// outlet = (ICapeThermoMaterial)this.Ports[2].connectedObject;
/// ((CapeOpen.ICapeThermoCompounds)outlet).GetCompoundList(ref compIds3, ref forms, ref names, ref bTemps, ref molWts, ref casNos);
/// }
/// catch (System.Exception p_Ex)
/// {
/// CapeOpen.CapeInvalidOperationException ex = new CapeOpen.CapeInvalidOperationException("Material object does not support CAPE-OPEN Thermodynamics 1.1.", p_Ex);
/// this.calcReport = String.Concat(this.calcReport, "Material object does not support CAPE-OPEN Thermodynamics 1.1.", System.Environment.NewLine);
/// this.throwException(ex);
/// }
/// int l1 = compIds1.Length;
/// int l2 = compIds2.Length;
/// int l3 = compIds3.Length;
/// if (l1 != l2)
/// {
/// this.calcReport = String.Concat(this.calcReport, "Compounds in imlet materials do not match.", System.Environment.NewLine);
/// throw new CapeOpen.CapeInvalidOperationException("Compounds in imlet materials do not match.");
/// }
/// if (l1 != l3)
/// {
/// this.calcReport = String.Concat(this.calcReport, "Compounds in imlet materials does not match outlet material.", System.Environment.NewLine);
/// throw new CapeOpen.CapeInvalidOperationException("Compounds in imlet materials does not match outlet material.");
/// }
/// for (int i = 0; i < l3; i++)
/// {
/// if ((String.Compare(compIds1[i], compIds2[i])) != 0)
/// {
/// this.calcReport = String.Concat(this.calcReport, "Compounds in imlet materials do not match.", System.Environment.NewLine);
/// throw new CapeOpen.CapeInvalidOperationException("Compounds in imlet materials do not match.");
/// }
///
/// if (String.Compare(compIds1[i], compIds3[i]) != 0)
/// {
/// this.calcReport = String.Concat(this.calcReport, "Compounds in imlet materials does not match outlet material.", System.Environment.NewLine);
/// throw new CapeOpen.CapeInvalidOperationException("Compounds in imlet materials does not mAtch outlet material.");
/// }
/// }
///
/// double[] flow1 = null;
/// double[] flow2 = null;
/// double[] press1 = null;
/// double[] press2 = null;
/// double[] flow3 = new double[l3];
/// String[] props = { "enthalpy" };
/// String[] overall = { "Overall" };
/// double[] enthalpy = { 0 };
/// String[] phases = null;
/// CapeOpen.ICapeThermoEquilibriumRoutine eqRoutine;
/// string[] strArr1 = null;
/// string[] strArr2 = null;
/// try
/// {
///
/// in1.GetOverallProp("flow", "mole", ref flow1);
/// double totalFlow = 0;
/// foreach (double flow in flow1)
/// {
/// totalFlow = totalFlow + flow;
/// }
/// in1.GetOverallProp("pressure", "", ref press1);
/// CapeOpen.ICapeThermoPropertyRoutine p_Calc = (CapeOpen.ICapeThermoPropertyRoutine)in1;
/// CapeOpen.ICapeThermoPhases phaseList = (CapeOpen.ICapeThermoPhases)in1;
/// phaseList.GetPhaseList(ref phases, ref strArr1, ref strArr2);
/// foreach (String phase in phases)
/// {
/// p_Calc.CalcSinglePhaseProp(props, phase);
/// double[] enth = null;
/// in1.GetSinglePhaseProp("enthalpy", phase, "mole", ref enth);
/// double[] fract = null;
/// in1.GetSinglePhaseProp("phaseFraction", phase, "mole", ref fract);
/// enthalpy[0] = enthalpy[0] + totalFlow * fract[0] * enth[0];
/// }
/// IDisposable disp = in1 as IDisposable;
/// if (disp != null)
/// {
/// disp.Dispose();
/// }
/// }
/// catch (System.Exception p_Ex)
/// {
/// CapeOpen.ECapeUser user = (CapeOpen.ECapeUser)in1;
/// this.calcReport = String.Concat(this.calcReport, user.description, System.Environment.NewLine);
/// this.throwException(p_Ex);
/// }
/// try
/// {
/// in2.GetOverallProp("flow", "mole", ref flow2);
/// double totalFlow = 0;
/// foreach (double flow in flow2)
/// {
/// totalFlow = totalFlow + flow;
/// }
/// in2.GetOverallProp("pressure", "", ref press2);
/// CapeOpen.ICapeThermoPropertyRoutine p_Calc = (CapeOpen.ICapeThermoPropertyRoutine)in2;
/// CapeOpen.ICapeThermoPhases phaseList = (CapeOpen.ICapeThermoPhases)in2;
/// phaseList.GetPhaseList(ref phases, ref strArr1, ref strArr2);
/// foreach (String phase in phases)
/// {
/// p_Calc.CalcSinglePhaseProp(props, phase);
/// double[] enth = null;
/// in2.GetSinglePhaseProp("enthalpy", phase, "mole", ref enth);
/// double[] fract = null;
/// in2.GetSinglePhaseProp("phaseFraction", phase, "mole", ref fract);
/// enthalpy[0] = enthalpy[0] + totalFlow * fract[0] * enth[0];
/// }
/// IDisposable disp = in2 as IDisposable;
/// if (disp != null)
/// {
/// disp.Dispose();
/// }
/// }
/// catch (System.Exception p_Ex)
/// {
/// CapeOpen.ECapeUser user = (CapeOpen.ECapeUser)in2;
/// this.calcReport = String.Concat(this.calcReport, user.description, System.Environment.NewLine);
/// this.throwException(p_Ex);
/// }
/// for (int i = 0; i < l3; i++)
/// {
/// flow3[i] = flow1[i] + flow2[i];
/// }
/// try
/// {
/// outlet.SetOverallProp("flow", "mole", flow3);
/// double[] press = new double[1];
/// press[0] = press1[0];
/// if (press1[0] > press2[0]) press[0] = press2[0];
/// double pressdrop = ((CapeOpen.RealParameter)this.Parameters[0]).SIValue;
/// press[0] = press[0] - pressdrop;
/// outlet.SetOverallProp("pressure", "", press);
/// double[] totalFlow = null;
/// outlet.GetOverallProp("totalFlow", "mole", ref totalFlow);
/// enthalpy[0] = enthalpy[0] / totalFlow[0];
/// outlet.SetOverallProp("enthalpy", "mole", enthalpy);
/// this.calcReport = String.Concat(this.calcReport, "The outlet pressure is: ", press[0].ToString(), "Pa", System.Environment.NewLine);
/// CapePhaseStatus[] status = { CapePhaseStatus.CAPE_ATEQUILIBRIUM, CapePhaseStatus.CAPE_ATEQUILIBRIUM };
/// outlet.SetPresentPhases(phases, status);
/// this.calcReport = String.Concat(this.calcReport, "The outlet ethalpy is: ", enthalpy[0].ToString(), "J/Mole", System.Environment.NewLine);
/// eqRoutine = (CapeOpen.ICapeThermoEquilibriumRoutine)outlet;
/// String[] spec1 = { "pressure", String.Empty, "Overall" };
/// String[] spec2 = { "enthalpy", String.Empty, "Overall" };
/// eqRoutine.CalcEquilibrium(spec1, spec2, "unspecified");
/// this.calcReport = String.Concat(this.calcReport, "Calculated pressure-enthalpy flash", System.Environment.NewLine);
/// }
/// catch (System.Exception p_Ex)
/// {
/// CapeOpen.ECapeUser user = (CapeOpen.ECapeUser)outlet;
/// this.calcReport = String.Concat(this.calcReport, user.description, System.Environment.NewLine);
/// this.throwException(p_Ex);
/// }
/// // Log the end of the calculation.
/// this.calcReport = String.Concat(this.calcReport, "Ending Mixer Calculation");
/// if (this.SimulationContext is CapeOpen.ICapeDiagnostic)
/// ((CapeOpen.ICapeDiagnostic)this.SimulationContext).LogMessage("Ending Mixer Calculation");
///}
/// </code>
/// </example>
/// <see cref="ICapeThermoMaterial"/>
/// <see cref="ICapeThermoCompounds"/>
/// <see cref="ICapeThermoPhases"/>
/// <see cref="ICapeThermoPropertyRoutine"/>
/// <see cref="ICapeThermoEquilibriumRoutine"/>
/// <see cref="COMExceptionHandler"/>
protected override void Calculate()
{
this.calcReport = String.Empty;
// Log a message using the simulation context (pop-up message commented out.
if (this.SimulationContext is CapeOpen.ICapeDiagnostic)
{
((CapeOpen.ICapeDiagnostic) this.SimulationContext).LogMessage("Starting Mixer Calculation");
}
this.calcReport = String.Concat(this.calcReport, "Starting Mixer Calculation", System.Environment.NewLine);
// Get the material Object from Port 0.
ICapeThermoMaterial in1 = null;
ICapeThermoMaterial in2 = null;
ICapeThermoMaterial outlet = null;
ICapeThermoMaterial temp = null;
String[] compIds1 = null;
String[] compIds2 = null;
String[] compIds3 = null;
String[] forms = null;
String[] names = null;
double[] bTemps = null;
double[] molWts = null;
String[] casNos = null;
try
{
temp = (ICapeThermoMaterial)this.Ports[0].connectedObject;
in1 = (ICapeThermoMaterial)temp.CreateMaterial();
in1.CopyFromMaterial(temp);
if (temp.GetType().IsCOMObject)
{
System.Runtime.InteropServices.Marshal.ReleaseComObject(temp);
}
((CapeOpen.ICapeThermoCompounds)in1).GetCompoundList(ref compIds1, ref forms, ref names, ref bTemps, ref molWts, ref casNos);
temp = (ICapeThermoMaterial)this.Ports[1].connectedObject;
in2 = (ICapeThermoMaterial)temp.CreateMaterial();
in2.CopyFromMaterial(temp);
if (temp.GetType().IsCOMObject)
{
System.Runtime.InteropServices.Marshal.FinalReleaseComObject(temp);
}
((CapeOpen.ICapeThermoCompounds)in2).GetCompoundList(ref compIds2, ref forms, ref names, ref bTemps, ref molWts, ref casNos);
outlet = (ICapeThermoMaterial)this.Ports[2].connectedObject;
((CapeOpen.ICapeThermoCompounds)outlet).GetCompoundList(ref compIds3, ref forms, ref names, ref bTemps, ref molWts, ref casNos);
}
catch (System.Exception p_Ex)
{
CapeOpen.CapeInvalidOperationException ex = new CapeOpen.CapeInvalidOperationException("Material object does not support CAPE-OPEN Thermodynamics 1.1.", p_Ex);
this.calcReport = String.Concat(this.calcReport, "Material object does not support CAPE-OPEN Thermodynamics 1.1.", System.Environment.NewLine);
this.throwException(ex);
}
int l1 = compIds1.Length;
int l2 = compIds2.Length;
int l3 = compIds3.Length;
if (l1 != l2)
{
this.calcReport = String.Concat(this.calcReport, "Compounds in imlet materials do not match.", System.Environment.NewLine);
throw new CapeOpen.CapeInvalidOperationException("Compounds in imlet materials do not match.");
}
if (l1 != l3)
{
this.calcReport = String.Concat(this.calcReport, "Compounds in imlet materials does not match outlet material.", System.Environment.NewLine);
throw new CapeOpen.CapeInvalidOperationException("Compounds in imlet materials does not match outlet material.");
}
for (int i = 0; i < l3; i++)
{
if ((String.Compare(compIds1[i], compIds2[i])) != 0)
{
this.calcReport = String.Concat(this.calcReport, "Compounds in imlet materials do not match.", System.Environment.NewLine);
throw new CapeOpen.CapeInvalidOperationException("Compounds in imlet materials do not match.");
}
if (String.Compare(compIds1[i], compIds3[i]) != 0)
{
this.calcReport = String.Concat(this.calcReport, "Compounds in imlet materials does not match outlet material.", System.Environment.NewLine);
throw new CapeOpen.CapeInvalidOperationException("Compounds in imlet materials does not mAtch outlet material.");
}
}
double[] flow1 = null;
double[] flow2 = null;
double[] press1 = null;
double[] press2 = null;
double[] flow3 = new double[l3];
String[] props = { "enthalpy" };
String[] overall = { "Overall" };
double[] enthalpy = { 0 };
String[] phases = null;
CapeOpen.ICapeThermoEquilibriumRoutine eqRoutine;
string[] strArr1 = null;
string[] strArr2 = null;
try
{
in1.GetOverallProp("flow", "mole", ref flow1);
double totalFlow = 0;
foreach (double flow in flow1)
{
totalFlow = totalFlow + flow;
}
in1.GetOverallProp("pressure", "", ref press1);
CapeOpen.ICapeThermoPropertyRoutine p_Calc = (CapeOpen.ICapeThermoPropertyRoutine)in1;
CapeOpen.ICapeThermoPhases phaseList = (CapeOpen.ICapeThermoPhases)in1;
phaseList.GetPhaseList(ref phases, ref strArr1, ref strArr2);
foreach (String phase in phases)
{
p_Calc.CalcSinglePhaseProp(props, phase);
double[] enth = null;
in1.GetSinglePhaseProp("enthalpy", phase, "mole", ref enth);
double[] fract = null;
in1.GetSinglePhaseProp("phaseFraction", phase, "mole", ref fract);
enthalpy[0] = enthalpy[0] + totalFlow * fract[0] * enth[0];
}
IDisposable disp = in1 as IDisposable;
if (disp != null)
{
disp.Dispose();
}
}
catch (System.Exception p_Ex)
{
CapeOpen.ECapeUser user = (CapeOpen.ECapeUser)in1;
this.calcReport = String.Concat(this.calcReport, user.description, System.Environment.NewLine);
this.throwException(p_Ex);
}
try
{
in2.GetOverallProp("flow", "mole", ref flow2);
double totalFlow = 0;
foreach (double flow in flow2)
{
totalFlow = totalFlow + flow;
}
in2.GetOverallProp("pressure", "", ref press2);
CapeOpen.ICapeThermoPropertyRoutine p_Calc = (CapeOpen.ICapeThermoPropertyRoutine)in2;
CapeOpen.ICapeThermoPhases phaseList = (CapeOpen.ICapeThermoPhases)in2;
phaseList.GetPhaseList(ref phases, ref strArr1, ref strArr2);
foreach (String phase in phases)
{
p_Calc.CalcSinglePhaseProp(props, phase);
double[] enth = null;
in2.GetSinglePhaseProp("enthalpy", phase, "mole", ref enth);
double[] fract = null;
in2.GetSinglePhaseProp("phaseFraction", phase, "mole", ref fract);
enthalpy[0] = enthalpy[0] + totalFlow * fract[0] * enth[0];
}
IDisposable disp = in2 as IDisposable;
if (disp != null)
{
disp.Dispose();
}
}
catch (System.Exception p_Ex)
{
CapeOpen.ECapeUser user = (CapeOpen.ECapeUser)in2;
this.calcReport = String.Concat(this.calcReport, user.description, System.Environment.NewLine);
this.throwException(p_Ex);
}
for (int i = 0; i < l3; i++)
{
flow3[i] = flow1[i] + flow2[i];
}
try
{
outlet.SetOverallProp("flow", "mole", flow3);
double[] press = new double[1];
press[0] = press1[0];
if (press1[0] > press2[0])
{
press[0] = press2[0];
}
double pressdrop = ((CapeOpen.RealParameter) this.Parameters[0]).SIValue;
press[0] = press[0] - pressdrop;
outlet.SetOverallProp("pressure", "", press);
double[] totalFlow = null;
outlet.GetOverallProp("totalFlow", "mole", ref totalFlow);
enthalpy[0] = enthalpy[0] / totalFlow[0];
outlet.SetOverallProp("enthalpy", "mole", enthalpy);
this.calcReport = String.Concat(this.calcReport, "The outlet pressure is: ", press[0].ToString(), "Pa", System.Environment.NewLine);
CapePhaseStatus[] status = { CapePhaseStatus.CAPE_ATEQUILIBRIUM, CapePhaseStatus.CAPE_ATEQUILIBRIUM };
outlet.SetPresentPhases(phases, status);
this.calcReport = String.Concat(this.calcReport, "The outlet ethalpy is: ", enthalpy[0].ToString(), "J/Mole", System.Environment.NewLine);
eqRoutine = (CapeOpen.ICapeThermoEquilibriumRoutine)outlet;
String[] spec1 = { "pressure", String.Empty, "Overall" };
String[] spec2 = { "enthalpy", String.Empty, "Overall" };
eqRoutine.CalcEquilibrium(spec1, spec2, "unspecified");
this.calcReport = String.Concat(this.calcReport, "Calculated pressure-enthalpy flash", System.Environment.NewLine);
}
catch (System.Exception p_Ex)
{
CapeOpen.ECapeUser user = (CapeOpen.ECapeUser)outlet;
this.calcReport = String.Concat(this.calcReport, user.description, System.Environment.NewLine);
this.throwException(p_Ex);
}
// Log the end of the calculation.
this.calcReport = String.Concat(this.calcReport, "Ending Mixer Calculation");
if (this.SimulationContext is CapeOpen.ICapeDiagnostic)
{
((CapeOpen.ICapeDiagnostic) this.SimulationContext).LogMessage("Ending Mixer Calculation");
}
}