protected override void Initialize()
{
Device.Name = "AMDPCNet_0x" + Device.Resources.GetIOPortRegion(0).BaseIOPort.ToString("X");
ioProm1 = Device.Resources.GetIOPortReadWrite(0, 0x0);
ioProm4 = Device.Resources.GetIOPortReadWrite(0, 0x4);
rdp = Device.Resources.GetIOPortReadWrite(0, 0x10);
rap = Device.Resources.GetIOPortReadWrite(0, 0x14);
bdp = Device.Resources.GetIOPortReadWrite(0, 0x1C);
initBlock = Device.Resources.GetMemory(0);
txDescriptor = Device.Resources.GetMemory(1);
rxDescriptor = Device.Resources.GetMemory(2);
buffers = Device.Resources.GetMemory(3);
bufferSize = 2048;
uint len = (ushort)(~bufferSize);
len = ((len + 1) & 0x0FFF) | 0x8000F000;
physicalBufferAddress = HAL.GetPhysicalAddress(buffers);
for (uint index = 0; index < 16; index++)
{
uint offset = index * 4;
rxDescriptor.Write32((offset + 1) * 4, len);
rxDescriptor.Write32((offset + 2) * 4, physicalBufferAddress + (bufferSize * index));
txDescriptor.Write32((offset + 2) * 4, physicalBufferAddress + (bufferSize * (index + 16)));
}
nextTXDesc = 0;
}
/// <summary>
/// Setups this hardware device driver
/// </summary>
/// <returns></returns>
public override bool Setup(IHardwareResources hardwareResources)
{
this.hardwareResources = hardwareResources;
base.name = "AMDPCNet_0x" + hardwareResources.GetIOPortRegion(0).BaseIOPort.ToString("X");
ioProm1 = hardwareResources.GetIOPort(0, 0x0);
ioProm4 = hardwareResources.GetIOPort(0, 0x4);
rdp = hardwareResources.GetIOPort(0, 0x10);
rap = hardwareResources.GetIOPort(0, 0x14);
bdp = hardwareResources.GetIOPort(0, 0x1C);
initBlock = hardwareResources.GetMemory(0);
txDescriptor = hardwareResources.GetMemory(1);
rxDescriptor = hardwareResources.GetMemory(2);
buffers = hardwareResources.GetMemory(3);
bufferSize = 2048;
uint len = (ushort)(~bufferSize);
len = (len + 1) & 0x0FFF | 0x8000F000;
physicalBufferAddress = HAL.GetPhysicalAddress(buffers);
for (uint index = 0; index < 16; index++)
{
uint offset = index * 4;
rxDescriptor.Write32((offset + 1) * 4, len);
rxDescriptor.Write32((offset + 2) * 4, physicalBufferAddress + (bufferSize * index));
txDescriptor.Write32((offset + 2) * 4, physicalBufferAddress + (bufferSize * (index + 16)));
}
nextTXDesc = 0;
return(true);
}
public override void Start()
{
if (Device.Status != DeviceStatus.Available)
{
return;
}
// Enable the card
//HardwareResources.DeviceResource.EnableDevice(); // TODO
// Do a 32-bit write to set 32-bit mode
rdp.Write32(0);
// Get the EEPROM MAC Address
var eepromMac = new byte[6];
var data = ioProm1.Read32();
eepromMac[0] = (byte)(data & 0xFF);
eepromMac[1] = (byte)((data >> 8) & 0xFF);
eepromMac[2] = (byte)((data >> 16) & 0xFF);
eepromMac[3] = (byte)((data >> 24) & 0xFF);
data = ioProm4.Read32();
eepromMac[4] = (byte)(data & 0xFF);
eepromMac[5] = (byte)((data >> 8) & 0xFF);
macAddress = new MACAddress(eepromMac);
// Fill in the initialization block
initBlock.Write32(0, (0x4 << 28) | (0x4 << 30));
initBlock.Write32(4, (uint)(eepromMac[0] | (eepromMac[1] << 8) | (eepromMac[2] << 16) | (eepromMac[3] << 24)));
initBlock.Write32(8, (uint)(eepromMac[4] | (eepromMac[5] << 8))); // Fill in the hardware MAC address
initBlock.Write32(16, 0x0);
initBlock.Write32(24, 0x0);
initBlock.Write32(28, rxDescriptor.Address);
initBlock.Write32(32, txDescriptor.Address);
// Write the initialization blocks address to the registers on the card
InitializationBlockAddress = HAL.GetPhysicalAddress(initBlock);
// Set the device to PCNet-PCI II Controller mode (full 32-bit mode)
SoftwareStyleRegister = 0x03;
nextTXDesc = 0;
Device.Status = DeviceStatus.Online;
}