public SampleCsGumballCylinderGetPoint(SampleCsGumballCylinder cylinder, GumballDisplayConduit radiusDc, GumballDisplayConduit heightDc)
{
m_cylinder = cylinder;
m_radius_dc = radiusDc;
m_height_dc = heightDc;
m_base_origin = Point3d.Unset;
m_base_point = Point3d.Unset;
}
public ClipGumballBoxGetPoint(ClipGumballBox Box, RhinoDoc doc, DrawClippingPlanesConduit m_draw_clipping_plane,
GumballDisplayConduit X_plus, GumballDisplayConduit X_minus,
GumballDisplayConduit Y_plus, GumballDisplayConduit Y_minus,
GumballDisplayConduit Z_plus, GumballDisplayConduit Z_minus)
{
m_Box = Box;
x_height_plus_dc = X_plus;
x_height_minus_dc = X_minus;
y_height_plus_dc = Y_plus;
y_height_minus_dc = Y_minus;
z_height_plus_dc = Z_plus;
z_height_minus_dc = Z_minus;
m_clipping_plane = m_draw_clipping_plane;
m_base_origin = Point3d.Unset;
m_base_point = Point3d.Unset;
m_doc = doc;
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
GetPoint gp = new GetPoint();
gp.SetCommandPrompt("Base of cylinder");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
Point3d center = gp.Point();
Plane plane = Plane.WorldXY;
RhinoView view = gp.View();
if (null != view)
{
plane = view.ActiveViewport.ConstructionPlane();
}
plane.Origin = center;
var cylinder = new SampleCsGumballCylinder(plane, m_radius, m_height);
var radius_go = new GumballObject();
var height_go = new GumballObject();
var radius_dc = new GumballDisplayConduit();
var height_dc = new GumballDisplayConduit();
var radius_gas = RadiusGumballAppearanceSettings();
var height_gas = HeightGumballAppearanceSettings();
while (true)
{
radius_go.SetFromPlane(cylinder.RadiusPlane);
height_go.SetFromPlane(cylinder.HeightPlane);
radius_dc.SetBaseGumball(radius_go, radius_gas);
height_dc.SetBaseGumball(height_go, height_gas);
radius_dc.Enabled = true;
height_dc.Enabled = true;
var gx = new SampleCsGumballCylinderGetPoint(cylinder, radius_dc, height_dc);
gx.SetCommandPrompt("Drag gumball. Press Enter when done");
gx.AcceptNothing(true);
gx.MoveGumball();
radius_dc.Enabled = false;
height_dc.Enabled = false;
if (gx.CommandResult() != Result.Success)
{
break;
}
var res = gx.Result();
if (res == GetResult.Point)
{
var radius = cylinder.Radius;
var height = cylinder.Height;
cylinder = new SampleCsGumballCylinder(plane, radius, height);
continue;
}
if (res == GetResult.Nothing)
{
m_radius = cylinder.Radius;
m_height = cylinder.Height;
cylinder = new SampleCsGumballCylinder(plane, m_radius, m_height);
var brep = cylinder.ToBrep;
if (null != brep)
{
doc.Objects.AddBrep(brep);
}
}
break;
}
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
if (basebox.IsValid == false)
{
Rhino.Input.RhinoGet.GetBox(out basebox);
}
BoundingBox bbox;
bbox = basebox.BoundingBox;
var newboxcorners = bbox.GetCorners();
if (newboxcorners == null)
{
return(Result.Failure);
}
//make plane for box)
Plane plane = new Plane(newboxcorners[0], newboxcorners[1], newboxcorners[3]);
//gumball settings
var X_plus_go = new GumballObject();
var X_minus_go = new GumballObject();
var Y_plus_go = new GumballObject();
var Y_minus_go = new GumballObject();
var Z_plus_go = new GumballObject();
var Z_minus_go = new GumballObject();
var X_plus_dc = new GumballDisplayConduit();
var X_minus_dc = new GumballDisplayConduit();
var Y_plus_dc = new GumballDisplayConduit();
var Y_minus_dc = new GumballDisplayConduit();
var Z_plus_dc = new GumballDisplayConduit();
var Z_minus_dc = new GumballDisplayConduit();
var X_plus_gas = XPlusGumballAppearanceSettings();
var X_minus_gas = XMinusGumballAppearanceSettings();
var Y_plus_gas = YPlusGumballAppearanceSettings();
var Y_minus_gas = YMinusGumballAppearanceSettings();
var Z_plus_gas = ZPlusGumballAppearanceSettings();
var Z_minus_gas = ZMinusGumballAppearanceSettings();
//This is flexible box
ClipGumballBox New_box;
if (m_draw_clipping_planes == null)
{
New_box = new ClipGumballBox(plane, newboxcorners);
m_draw_clipping_planes = new DrawClippingPlanesConduit(New_box);
m_draw_clipping_planes.Enabled = true;
doc.Views.Redraw();
}
else
{
m_draw_clipping_planes.Enabled = false;
m_draw_clipping_planes = null;
m_display_clipping_box.Enabled = false;
m_display_clipping_box = null;
New_box = new ClipGumballBox(plane, newboxcorners);
m_draw_clipping_planes = new DrawClippingPlanesConduit(New_box);
m_draw_clipping_planes.Enabled = true;
doc.Views.Redraw();
}
if (New_box == null)
{
return(Result.Failure);
}
while (true)
{
X_plus_go.SetFromPlane(New_box.X_plus_plane); //set point of gumball
X_minus_go.SetFromPlane(New_box.X_minus_plane);
Y_plus_go.SetFromPlane(New_box.Y_plus_plane);
Y_minus_go.SetFromPlane(New_box.Y_minus_plane);
Z_plus_go.SetFromPlane(New_box.Z_plus_plane);
Z_minus_go.SetFromPlane(New_box.Z_minus_plane);
X_plus_dc.SetBaseGumball(X_plus_go, X_plus_gas);
X_minus_dc.SetBaseGumball(X_minus_go, X_minus_gas);
Y_plus_dc.SetBaseGumball(Y_plus_go, Y_plus_gas);
Y_minus_dc.SetBaseGumball(Y_minus_go, Y_minus_gas);
Z_plus_dc.SetBaseGumball(Z_plus_go, Z_plus_gas);
Z_minus_dc.SetBaseGumball(Z_minus_go, Z_minus_gas);
X_plus_dc.Enabled = true;
X_minus_dc.Enabled = true;
Y_plus_dc.Enabled = true;
Y_minus_dc.Enabled = true;
Z_plus_dc.Enabled = true;
Z_minus_dc.Enabled = true;
var gx = new ClipGumballBoxGetPoint(New_box, doc, /* viewPortID,*/ m_draw_clipping_planes, X_plus_dc, X_minus_dc, Y_plus_dc, Y_minus_dc, Z_plus_dc, Z_minus_dc /*, rv, ref removed*/);
gx.SetCommandPrompt("Drag gumball. Press Enter when done");
gx.AcceptNothing(true); //this line is for "press Enter key"
gx.MoveGumball();
X_plus_dc.Enabled = false; //To enable gumball arrow
X_minus_dc.Enabled = false;
Y_plus_dc.Enabled = false;
Y_minus_dc.Enabled = false;
Z_plus_dc.Enabled = false;
Z_minus_dc.Enabled = false;
if (gx.CommandResult() != Result.Success)
{
break;
}
var res = gx.Result();
if (res == GetResult.Point)
{
var new_points = New_box.CornerPoints;
New_box = new ClipGumballBox(plane, new_points);
m_draw_clipping_planes.Enabled = false;
m_draw_clipping_planes = gx.m_plain;
m_draw_clipping_planes.Enabled = true;
if (doc.Views.RedrawEnabled == true)
{
doc.Views.Redraw();
}
continue;
}
else if (res == GetResult.Nothing) //When press Enter key
{
newboxcorners = New_box.CornerPoints;
var new_box = new Box(plane, newboxcorners);
New_box.SetConstructionPlane(doc, "Top"); //To set construction plane for "Top", "Front", "Right" not other views so far
New_box.SetConstructionPlane(doc, "Right");
New_box.SetConstructionPlane(doc, "Front");
m_draw_clipping_planes.Enabled = false;
m_draw_clipping_planes = gx.m_plain;
m_draw_clipping_planes.Enabled = true;
doc.Views.Redraw();
basebox = new_box;
if (basebox.IsValid)
{
m_display_clipping_box = new DisplayClippingBoxConduit(basebox);
m_display_clipping_box.Enabled = true;
}
}
break;
}
doc.Views.Redraw();
return(Result.Success);
}
