/// <inheritdoc />
protected override IEnumerator <object?> OnPerform(GenerationContext context)
{
// Validate configuration
if (CutoffBigAreaFill > TotalIterations)
{
throw new InvalidConfigurationException(this, nameof(CutoffBigAreaFill),
$"The value must be less than or equal to the value of {nameof(TotalIterations)}.");
}
// Get or create/add a wall-floor context component
var wallFloorContext = context.GetFirstOrNew <ISettableGridView <bool> >(
() => new ArrayView <bool>(context.Width, context.Height),
WallFloorComponentTag);
// Create a new array map to use in the smoothing algorithms to temporarily store old values.
// Allocating it here instead of in the smoothing minimizes allocations.
var oldMap = new ArrayView <bool>(wallFloorContext.Width, wallFloorContext.Height);
// Iterate over the generated values, smoothing them with the appropriate algorithm
for (int i = 0; i < TotalIterations; i++)
{
CellAutoSmoothingAlgo(wallFloorContext, oldMap, i < CutoffBigAreaFill);
yield return(null);
}
// Fill to a rectangle to ensure the resulting areas are enclosed
foreach (var pos in wallFloorContext.Bounds().PerimeterPositions())
{
wallFloorContext[pos] = false;
}
}
/// <inheritdoc/>
protected override IEnumerator <object?> OnPerform(GenerationContext context)
{
// Get or create/add a wall-floor context component
var wallFloorContext = context.GetFirstOrNew <ISettableGridView <bool> >(
() => new ArrayView <bool>(context.Width, context.Height),
WallFloorComponentTag
);
var innerBounds = wallFloorContext.Bounds().Expand(-1, -1);
foreach (var position in wallFloorContext.Positions())
{
wallFloorContext[position] = innerBounds.Contains(position);
}
// No stages as its a simple rectangle generator
yield break;
}
/// <inheritdoc/>
protected override IEnumerator <object?> OnPerform(GenerationContext context)
{
// Validate configuration
if (FillProbability > 100)
{
throw new InvalidConfigurationException(this, nameof(FillProbability),
"The value must be a valid percent (between 0 and 100).");
}
// Get or create/add a grid view context component to fill
var gridViewContext = context.GetFirstOrNew <ISettableGridView <bool> >(
() => new ArrayView <bool>(context.Width, context.Height),
GridViewComponentTag);
// Determine positions to fill based on exclusion settings
var positionsRect = ExcludePerimeterPoints
? gridViewContext.Bounds().Expand(-1, -1)
: gridViewContext.Bounds();
// Fill each position with a random value
uint squares = 0;
foreach (var position in positionsRect.Positions())
{
gridViewContext[position] = RNG.PercentageCheck(FillProbability);
squares++;
if (FillsBetweenPauses != 0 && squares == FillsBetweenPauses)
{
squares = 0;
yield return(null);
}
}
// Pause one last time if we need
if (FillsBetweenPauses != 0 && squares != 0)
{
yield return(null);
}
}
/// <inheritdoc />
protected override IEnumerator <object?> OnPerform(GenerationContext context)
{
// Validate configuration
if (MinRooms > MaxRooms)
{
throw new InvalidConfigurationException(this, nameof(MinRooms),
$"The value must be less than or equal to the value of {nameof(MaxRooms)}.");
}
if (RoomMinSize > RoomMaxSize)
{
throw new InvalidConfigurationException(this, nameof(RoomMinSize),
$"The value must be less than or equal to the value of ${nameof(RoomMaxSize)}.");
}
if (RoomSizeRatioX <= 0f)
{
throw new InvalidConfigurationException(this, nameof(RoomSizeRatioX),
"The value must be greater than 0.");
}
if (RoomSizeRatioY <= 0f)
{
throw new InvalidConfigurationException(this, nameof(RoomSizeRatioY),
"The value must be greater than 0.");
}
// Get or create/add a wall-floor context component
var wallFloorContext = context.GetFirstOrNew <ISettableGridView <bool> >(
() => new ArrayView <bool>(context.Width, context.Height),
WallFloorComponentTag
);
// Determine how many rooms to generate
var roomCounter = RNG.NextInt(MinRooms, MaxRooms + 1);
// Get or create/add a rooms context component
var roomsContext = context.GetFirstOrNew(
() => new ItemList <Rectangle>(roomCounter),
RoomsComponentTag
);
// Try to place all the rooms
while (roomCounter != 0)
{
var tryCounterCreate = MaxCreationAttempts;
var placed = false;
// Attempt to create the room until either we reach max attempts or we create and place a room in a valid location
while (tryCounterCreate != 0)
{
var roomSize = RNG.NextInt(RoomMinSize, RoomMaxSize + 1);
var width =
(int)(roomSize * RoomSizeRatioX); // This helps with non square fonts. So rooms don't look odd
var height = (int)(roomSize * RoomSizeRatioY);
// When accounting for font ratios, these adjustments help prevent all rooms
// having the same looking square format
var adjustmentBase = roomSize / 4;
if (adjustmentBase != 0)
{
var adjustment = RNG.NextInt(-adjustmentBase, adjustmentBase + 1);
var adjustmentChance = RNG.NextInt(0, 2);
if (adjustmentChance == 0)
{
width += (int)(adjustment * RoomSizeRatioX);
}
else if (adjustmentChance == 1)
{
height += (int)(adjustment * RoomSizeRatioY);
}
}
width = Math.Max(RoomMinSize, width);
height = Math.Max(RoomMinSize, height);
// Keep room interior odd, helps with placement + tunnels around the outside.
if (width % 2 == 0)
{
width += 1;
}
if (height % 2 == 0)
{
height += 1;
}
var roomInnerRect = new Rectangle(0, 0, width, height);
var tryCounterPlace = MaxPlacementAttempts;
// Try to place the room we've created until either it doesn't intersect any other rooms, or we reach max retries (in which case, we will scrap the room entirely, create a new one, and try again)
while (tryCounterPlace != 0)
{
int xPos = 0, yPos = 0;
// Generate the rooms at odd positions, to make door/tunnel placement easier
while (xPos % 2 == 0)
{
xPos = RNG.NextInt(3, wallFloorContext.Width - roomInnerRect.Width - 3);
}
while (yPos % 2 == 0)
{
yPos = RNG.NextInt(3, wallFloorContext.Height - roomInnerRect.Height - 3);
}
// Record a rectangle for the inner and outer bounds of the room we've created
roomInnerRect = roomInnerRect.WithPosition(new Point(xPos, yPos));
var roomBounds = roomInnerRect.Expand(3, 3);
// Check if the room intersects with any floor tile on the map already. We do it this way instead of checking against only the rooms list
// to ensure that if some other map generation step placed things before we did, we don't intersect those.
var intersected = false;
foreach (var point in roomBounds.Positions())
{
if (wallFloorContext[point])
{
intersected = true;
break;
}
}
// If we intersected floor tiles, try to place the room again
if (intersected)
{
tryCounterPlace--;
continue;
}
// Once we place it in a valid location, update the wall/floor context, and add the room to the list of rooms.
foreach (var point in roomInnerRect.Positions())
{
wallFloorContext[point] = true;
}
placed = true;
roomsContext.Add(roomInnerRect, Name);
break;
}
if (placed)
{
yield return(null);
break;
}
tryCounterCreate--;
}
roomCounter--;
}
}
/// <inheritdoc />
protected override IEnumerator <object?> OnPerform(GenerationContext context)
{
// Validate configuration
if (CrawlerChangeDirectionImprovement > 100)
{
throw new InvalidConfigurationException(this, nameof(CrawlerChangeDirectionImprovement),
"The value must be a valid percent (between 0 and 100).");
}
// Logic implemented from http://journal.stuffwithstuff.com/2014/12/21/rooms-and-mazes/
// Get or create/add a wall-floor context component
var wallFloorContext = context.GetFirstOrNew <ISettableGridView <bool> >(
() => new ArrayView <bool>(context.Width, context.Height),
WallFloorComponentTag
);
// Get or create/add a tunnel list context component
var tunnelList = context.GetFirstOrNew(
() => new ItemList <Area>(),
TunnelsComponentTag
);
// Record spaces we've crawled to introduce changes.
int spacesCrawled = 0;
var crawlers = new List <Crawler>();
var empty = FindEmptySquare(wallFloorContext, RNG);
while (empty != Point.None)
{
var crawler = new Crawler();
crawlers.Add(crawler);
crawler.MoveTo(empty);
var startedCrawler = true;
ushort percentChangeDirection = 0;
while (crawler.Path.Count != 0)
{
// Dig this position
wallFloorContext[crawler.CurrentPosition] = true;
// Get valid directions (basically is any position outside the map or not?
var points = AdjacencyRule.Cardinals.NeighborsClockwise(crawler.CurrentPosition).ToArray();
var directions = AdjacencyRule.Cardinals.DirectionsOfNeighborsClockwise(Direction.None).ToList();
var validDirections = new bool[4];
// Rule out any valid directions based on their position. Only process cardinals, do not use diagonals
for (var i = 0; i < 4; i++)
{
validDirections[i] = IsPointWallsExceptSource(wallFloorContext, points[i], directions[i] + 4);
}
// If not a new crawler, exclude where we came from
if (!startedCrawler)
{
validDirections[directions.IndexOf(crawler.Facing + 4)] = false;
}
// Do we have any valid direction to go?
if (validDirections[0] || validDirections[1] || validDirections[2] || validDirections[3])
{
int index;
// Are we just starting this crawler? OR Is the current crawler facing
// direction invalid?
if (startedCrawler || validDirections[directions.IndexOf(crawler.Facing)] == false)
{
// Just get anything
index = GetDirectionIndex(validDirections, RNG);
crawler.Facing = directions[index];
percentChangeDirection = 0;
startedCrawler = false;
}
else
{
// Increase probability we change direction
percentChangeDirection += CrawlerChangeDirectionImprovement;
if (RNG.PercentageCheck(percentChangeDirection))
{
index = GetDirectionIndex(validDirections, RNG);
crawler.Facing = directions[index];
percentChangeDirection = 0;
}
else
{
index = directions.IndexOf(crawler.Facing);
}
}
crawler.MoveTo(points[index]);
spacesCrawled++;
}
else
{
crawler.Backtrack();
spacesCrawled++;
}
if (spacesCrawled >= 10)
{
yield return(null);
spacesCrawled = 0;
}
}
if (spacesCrawled > 0)
{
yield return(null);
spacesCrawled = 0;
}
empty = FindEmptySquare(wallFloorContext, RNG);
}
// Add appropriate items to the tunnels list
tunnelList.AddRange(crawlers.Select(c => c.AllPositions).Where(a => a.Count != 0), Name);
}
