/// <summary> /// Build Stator in FEMM /// </summary> /// <param name="MaterialParams"></param> public override void BuildInFEMM(FEMM femm = null) { if (femm == null) { femm = FEMM.DefaultFEMM; } AbstractRotor Rotor = Motor.Rotor; bool fullbuild = Motor.GeneralParams.FullBuildFEMModel; // create material femm.mi_addmaterialSteel(SteelMaterialName, 1, 1, Lam_d, Lam_fill, FEMM.LaminationType.NotLaminated, BH.Select(p => p.b).ToArray(), BH.Select(p => p.h).ToArray()); femm.mi_addmaterialCopper(WireMaterialName, WireConduct, WireType, 1, WireDiameter); // create boundary femm.mi_addboundprop_Prescribed_A(BoundaryProperty, 0, 0, 0, 0); /////// Build half slot ////segments - lines femm.mi_addSegmentEx(xB, yB, xC, yC, Group_Lines_Stator); //BC femm.mi_addSegmentEx(xD, yD, xE, yE, Group_Lines_Stator); //DE femm.mi_addSegmentEx(xF, yF, xF, 0, Group_Lines_Stator); //FF1 if (yC != yCC) { femm.mi_addSegmentEx(xC, yC, xCC, yCC, Group_Lines_Stator);//CC' } //// arcsegments //BA double a = (Math.Atan(yA / xA) - Math.Atan(yB / xB)) * 180 / Math.PI; femm.mi_addArcEx(xB, yB, xA, yA, a, 1, Group_Lines_Stator); //DC' femm.mi_addArcEx(xD, yD, xCC, yCC, 90, 30, Group_Lines_Stator); //EF femm.mi_addArcEx(xF, yF, xE, yE, 90, 30, Group_Lines_Stator); //// the coil femm.mi_addSegmentEx(xD2, yD2, xE2, yE2, Group_Lines_Stator); femm.mi_addSegmentEx(xF2, yF2, xF2, 0, Group_Lines_Stator); femm.mi_addSegmentEx(xCC2, yCC2, xCC2, 0, Group_Lines_Stator); //CC2-D2 femm.mi_addArcEx(xD2, yD2, xCC2, yCC2, 90, 30, Group_Lines_Stator); //EF femm.mi_addArcEx(xF2, yF2, xE2, yE2, 90, 30, Group_Lines_Stator); ////// mirrored half to one femm.mi_clearselected(); femm.mi_selectgroup(Group_Lines_Stator); femm.mi_mirror(0, 0, 1, 0, FEMM.EditMode.group); //////// Build Q slots (copy) femm.mi_clearselected(); femm.mi_selectgroup(Group_Lines_Stator); femm.mi_selectgroup(Group_BlockLabel_Wire); if (fullbuild) { femm.mi_copyrotate(0, 0, 360.0 / Q, Q - 1, FEMM.EditMode.group); } else { femm.mi_copyrotate(0, 0, 360.0 / Q, Q / (2 * Rotor.p) - 1, FEMM.EditMode.group); // rotate so they match with rotor femm.mi_clearselected(); femm.mi_selectgroup(Group_Lines_Stator); femm.mi_selectgroup(Group_BlockLabel_Wire); // rotate angle to double shiftangle = -Rotor.alphaDegree + 180.0 / Q; femm.mi_moverotate(0, 0, shiftangle, FEMM.EditMode.group); } ////// Block labels (steel) femm.mi_addBlockLabelEx((xF + Rstator) / 2, 0, SteelMaterialName, Group_BlockLabel_Steel); /////// Stator outer lines (2 arcs) if (fullbuild) { femm.mi_addArcEx(Rstator, 0, -Rstator, 0, 180, 10, Group_Lines_Stator); femm.mi_addArcEx(-Rstator, 0, Rstator, 0, 180, 10, Group_Lines_Stator); } else { femm.mi_addArcEx(Rstator * Math.Cos(Rotor.alpha), -Rstator * Math.Sin(Rotor.alpha), Rstator * Math.Cos(Rotor.alpha), Rstator * Math.Sin(Rotor.alpha), 2 * Rotor.alphaDegree, 10, Group_Lines_Stator); } // Set boundary condition for outline stator femm.mi_clearselected(); if (fullbuild) { femm.mi_selectarcsegment(0, Rstator); femm.mi_selectarcsegment(0, -Rstator); } else { femm.mi_selectarcsegment(Rstator, 0); } femm.mi_setarcsegmentprop(10, BoundaryProperty, false, Group_Lines_Stator); /////// Wire, circuits in slot foreach (Circuit c in circuits) { femm.mi_addcircprop(c.name, c.current, c.circuitType); } double r = (xD + xE) / 2; foreach (Coil sci in coils) { int i = coils.IndexOf(sci); if (fullbuild) { //angle go clockwise from 3 o'clock (=0 degree in decarter), double aa = -2 * Math.PI * i / Q; double x = r * Math.Cos(aa); double y = r * Math.Sin(aa); femm.mi_addBlockLabelEx(x, y, WireMaterialName, Group_BlockLabel_Wire, sci.inCircuit, sci.Nturns); } else { //angle go clockwise from 3 o'clock (=0 degree in decarter), shift +pi/Q (to match rotor) int nn = Q / (2 * Rotor.p); double aa = -2 * Math.PI * i / Q + (nn % 2 == 0 ? Math.PI / Q : 0); double x = r * Math.Cos(aa); double y = r * Math.Sin(aa); if (aa > -Rotor.alpha || aa < -2 * Math.PI + Rotor.alpha) { femm.mi_addBlockLabelEx(x, y, WireMaterialName, Group_BlockLabel_Wire, sci.inCircuit, sci.Nturns); } } } if (fullbuild) { //pre-rotate stator (fullbuild only) femm.mi_clearselected(); femm.mi_selectgroup(Group_Lines_Stator); femm.mi_selectgroup(Group_BlockLabel_Wire); femm.mi_selectgroup(Group_BlockLabel_Steel); femm.mi_moverotate(0, 0, PreRotateAngle, FEMM.EditMode.group); } if (!fullbuild) { //build boundary of motor: 2 lines, anti-periodic String boundaryName = "stator-apb-1"; double x1 = Rinstator * Math.Cos(Rotor.alpha); double y1 = Rinstator * Math.Sin(Rotor.alpha); double x2 = Rstator * Math.Cos(Rotor.alpha); double y2 = Rstator * Math.Sin(Rotor.alpha); femm.mi_addSegmentEx(x1, y1, x2, y2, Group_Lines_Stator); femm.mi_addSegmentEx(x1, -y1, x2, -y2, Group_Lines_Stator); femm.mi_addboundprop_AntiPeriodic(boundaryName); femm.mi_clearselected(); femm.mi_selectsegment(x2, y2); femm.mi_selectsegment(x2, -y2); femm.mi_setsegmentprop(boundaryName, 0, true, false, Group_Lines_Stator); } }