public GeometryExtrusionWithAtlasOptions(GeometryExtrusionOptions extrusionOptions)
{
extrusionType = extrusionOptions.extrusionType;
extrusionGeometryType = extrusionOptions.extrusionGeometryType;
propertyName = extrusionOptions.propertyName;
minimumHeight = extrusionOptions.minimumHeight;
maximumHeight = extrusionOptions.maximumHeight;
extrusionScaleFactor = extrusionOptions.extrusionScaleFactor;
}
public GeometryExtrusionWithAtlasOptions(GeometryExtrusionOptions extrusionOptions, UVModifierOptions uvOptions)
{
extrusionType = extrusionOptions.extrusionType;
extrusionGeometryType = extrusionOptions.extrusionGeometryType;
propertyName = extrusionOptions.propertyName;
minimumHeight = extrusionOptions.minimumHeight;
maximumHeight = extrusionOptions.maximumHeight;
texturingType = uvOptions.texturingType;
atlasInfo = uvOptions.atlasInfo;
}
/// <summary>
/// Changes extrusion type to "Range Height" and extrudes all features by
/// the choosen property's value such that all vertices (roof) will be
/// flat at the highest vertex elevation (after terrain elevation taken into account).
/// </summary>
/// <param name="extrusionGeometryType">Option to create top and side polygons after extrusion.</param>
/// <param name="propertyName">Name of the property to use for extrusion</param>
/// <param name="extrusionScaleFactor">Height multiplier</param>
void ISubLayerExtrusionOptions.EnableMaxExtrusion(ExtrusionGeometryType extrusionGeometryType, string propertyName, float extrusionScaleFactor)
{
if (extrusionType != ExtrusionType.MaxHeight ||
this.extrusionGeometryType != extrusionGeometryType ||
this.propertyName != propertyName ||
!Mathf.Approximately(this.extrusionScaleFactor, extrusionScaleFactor))
{
this.extrusionType = ExtrusionType.MaxHeight;
this.extrusionGeometryType = extrusionGeometryType;
this.propertyName = propertyName;
this.extrusionScaleFactor = extrusionScaleFactor;
HasChanged = true;
}
}
/// <summary>
/// Changes extrusion type to "Minimum Height" and extrudes all features by
/// the choosen property's value such that all vertices (roof) will be
/// flat at the lowest vertex elevation (after terrain elevation taken into account).
/// </summary>
/// <param name="extrusionGeometryType">Option to create top and side polygons after extrusion.</param>
/// <param name="propertyName">Name of the property to use for extrusion</param>
/// <param name="extrusionScaleFactor">Height multiplier</param>
public virtual void EnableMinExtrusion(ExtrusionGeometryType extrusionGeometryType, string propertyName = "height", float extrusionScaleFactor = 1)
{
if (extrusionType != ExtrusionType.MinHeight ||
this.extrusionGeometryType != extrusionGeometryType ||
this.propertyName != propertyName ||
!Mathf.Approximately(this.extrusionScaleFactor, extrusionScaleFactor))
{
extrusionType = ExtrusionType.MinHeight;
this.extrusionGeometryType = extrusionGeometryType;
this.propertyName = propertyName;
this.extrusionScaleFactor = extrusionScaleFactor;
HasChanged = true;
}
}
/// <summary>
/// Changes extrusion type to "Property" and extrudes all features by
/// the choosen property's value.
/// </summary>
/// <param name="geometryType">Option to create top and side polygons after extrusion.</param>
/// <param name="propertyAttribute">Name of the property to use for extrusion</param>
/// <param name="scaleFactor">Height multiplier</param>
public virtual void EnablePropertyExtrusion(ExtrusionGeometryType geometryType, string propertyAttribute = "height", float scaleFactor = 1)
{
if (extrusionType != ExtrusionType.PropertyHeight ||
extrusionGeometryType != geometryType ||
propertyName != propertyAttribute ||
!Mathf.Approximately(extrusionScaleFactor, scaleFactor))
{
extrusionType = ExtrusionType.PropertyHeight;
extrusionGeometryType = geometryType;
propertyName = propertyAttribute;
extrusionScaleFactor = scaleFactor;
HasChanged = true;
}
}
/// <summary>
/// Changes extrusion type to "Absolute height" and extrudes all features by
/// the given fixed value.
/// </summary>
/// <param name="geometryType">Option to create top and side polygons after extrusion.</param>
/// <param name="height">Extrusion value</param>
/// <param name="scaleFactor">Height multiplier</param>
public virtual void EnableAbsoluteExtrusion(ExtrusionGeometryType geometryType, float height, float scaleFactor = 1)
{
if (extrusionType != ExtrusionType.AbsoluteHeight ||
extrusionGeometryType != geometryType ||
!Mathf.Approximately(maximumHeight, height) ||
!Mathf.Approximately(extrusionScaleFactor, scaleFactor))
{
extrusionType = ExtrusionType.AbsoluteHeight;
extrusionGeometryType = geometryType;
maximumHeight = height;
extrusionScaleFactor = scaleFactor;
HasChanged = true;
}
}
/// /// <summary>
/// Changes extrusion type to "Minimum Height" and extrudes all features by
/// the choosen property's value such that they'll be in provided range.
/// Lower values will be increase to Minimum Height and higher values will
/// be lowered to Maximum height.
/// </summary>
/// <param name="extrusionGeometryType">Option to create top and side polygons after extrusion.</param>
/// <param name="minHeight">Lower bound to be used for extrusion</param>
/// <param name="maxHeight">Top bound to be used for extrusion</param>
/// <param name="extrusionScaleFactor">Height multiplier</param>
public virtual void EnableRangeExtrusion(ExtrusionGeometryType extrusionGeometryType, float minHeight, float maxHeight, float extrusionScaleFactor = 1)
{
if (extrusionType != ExtrusionType.RangeHeight ||
this.extrusionGeometryType != extrusionGeometryType ||
!Mathf.Approximately(minimumHeight, minHeight) ||
!Mathf.Approximately(maximumHeight, maxHeight) ||
!Mathf.Approximately(this.extrusionScaleFactor, extrusionScaleFactor))
{
extrusionType = ExtrusionType.RangeHeight;
this.extrusionGeometryType = extrusionGeometryType;
minimumHeight = minHeight;
maximumHeight = maxHeight;
this.extrusionScaleFactor = extrusionScaleFactor;
HasChanged = true;
}
}
/// <summary>
/// Gets the default sub layer properties for the chosen preset type.
/// </summary>
/// <returns>The sub layer properties.</returns>
/// <param name="type">Type.</param>
public static VectorSubLayerProperties GetSubLayerProperties(PresetFeatureType type)
{
//CoreOptions properties
VectorPrimitiveType geometryType = VectorPrimitiveType.Polygon;
string layerName = "building";
string sublayerName = "Untitled";
//Line Geometry Options
float lineWidth = 1.0f;
//Geometry Extrusion Options
ExtrusionType extrusionType = ExtrusionType.None;
ExtrusionGeometryType extrusionGeometryType = ExtrusionGeometryType.RoofAndSide;
string propertyName = "height";
float extrusionScaleFactor = 1.0f;
float extrusionHeight = 1.0f;
//Filter Options
LayerFilterCombinerOperationType combinerType = LayerFilterCombinerOperationType.Any;
List <LayerFilter> filters = new List <LayerFilter>();
// Material Options
StyleTypes style = StyleTypes.Realistic;
//Misc options
bool buildingsWithUniqueIds = true;
PositionTargetType positionTargetType = PositionTargetType.TileCenter;
//Modifiers
List <MeshModifier> meshModifiers = new List <MeshModifier>();
List <GameObjectModifier> gameObjectModifiers = new List <GameObjectModifier>();
ColliderType colliderType = ColliderType.None;
switch (type)
{
case PresetFeatureType.Buildings:
layerName = "building";
geometryType = VectorPrimitiveType.Polygon;
extrusionType = ExtrusionType.PropertyHeight;
extrusionGeometryType = ExtrusionGeometryType.RoofAndSide;
propertyName = "height";
style = StyleTypes.Realistic;
break;
case PresetFeatureType.Roads:
layerName = "road";
geometryType = VectorPrimitiveType.Line;
lineWidth = 1.0f;
style = StyleTypes.Dark;
extrusionType = ExtrusionType.AbsoluteHeight;
extrusionGeometryType = ExtrusionGeometryType.RoofAndSide;
break;
case PresetFeatureType.Points:
layerName = "poi_label";
geometryType = VectorPrimitiveType.Point;
break;
case PresetFeatureType.Landuse:
layerName = "landuse";
geometryType = VectorPrimitiveType.Polygon;
style = StyleTypes.Color;
break;
case PresetFeatureType.Custom:
layerName = "";
geometryType = VectorPrimitiveType.Custom;
style = StyleTypes.Custom;
break;
default:
break;
}
VectorSubLayerProperties _properties = new VectorSubLayerProperties();
_properties.presetFeatureType = type;
_properties.coreOptions = new CoreVectorLayerProperties
{
isActive = true,
layerName = layerName,
geometryType = geometryType,
snapToTerrain = true,
combineMeshes = false,
sublayerName = sublayerName
};
_properties.lineGeometryOptions = new LineGeometryOptions
{
Width = lineWidth
};
_properties.extrusionOptions = new GeometryExtrusionOptions
{
extrusionType = extrusionType,
extrusionGeometryType = extrusionGeometryType,
propertyName = propertyName,
extrusionScaleFactor = extrusionScaleFactor,
maximumHeight = extrusionHeight
};
_properties.filterOptions = new VectorFilterOptions
{
combinerType = combinerType,
filters = filters
};
_properties.materialOptions = new GeometryMaterialOptions
{
style = style,
colorStyleColor = Constants.GUI.Colors.EDITOR_FEATURE_DEFAULT_COLOR
};
_properties.materialOptions.SetDefaultMaterialOptions();
_properties.buildingsWithUniqueIds = buildingsWithUniqueIds;
_properties.moveFeaturePositionTo = positionTargetType;
_properties.MeshModifiers = meshModifiers;
_properties.GoModifiers = gameObjectModifiers;
_properties.colliderOptions = new ColliderOptions
{
colliderType = colliderType
};
return(_properties);
}
