private void createConsoleDrawing1()
{
Curve curve = createOutline();
Brep brep = Extrusion.CreateExtrusion(curve,
new Vector3d(0, 0, convertToDouble(textBox_b.Text))).ToBrep()
.CapPlanarHoles(RhinoDoc.ActiveDoc.ModelAbsoluteTolerance);
RhinoDoc.ActiveDoc.Objects.AddBrep(brep);
_corbelConduit.reinforcements.Clear();
_corbelConduit.corbel = brep;
Brep reinf = createMainReinforcement();
double width = convertToDouble(textBox_b.Text);
double distance = (width - convertToDouble(textBox_cc.Text) * 2 - 2 * 32) / (convertToDouble(textBox_n.Text) - 1);
Brep first = (Brep)reinf.DuplicateShallow();
first.Translate(new Vector3d(0, 0, convertToDouble(textBox_cc.Text) + 32));
_corbelConduit.reinforcements.Add(first);
for (int i = 0; i < convertToDouble(textBox_n.Text); i++)
{
Brep copy = (Brep)first.DuplicateShallow();
copy.Translate(new Vector3d(0, 0, i * distance));
_corbelConduit.reinforcements.Add(copy);
}
RhinoDoc.ActiveDoc.Views.Redraw();
}
public static List <Brep> OrthogonalEgress(List <Curve> coreCurves, List <Curve> egressAxis)
{
List <Brep> egressExemptionRegions = new List <Brep>();
for (int i = 0; i < egressAxis.Count; i++)
{
Point3d coreCurveMidpoint = Utils.GetCurveMidPoint(coreCurves[i]);
egressAxis[i].ClosestPoint(coreCurveMidpoint, out double circulationParameter);
Point3d circulationPoint = egressAxis[i].PointAt(circulationParameter);
Vector3d connectionVector = new Vector3d(circulationPoint - coreCurveMidpoint);
bool proportionIsVertical = Confirm.VectorProportionIsVertical(connectionVector);
Vector3d egressVector = (proportionIsVertical == true) ? new Vector3d(0, connectionVector.Y, 0) : new Vector3d(connectionVector.X, 0, 0);
Curve egressRegionProfile = Curves.RebuildPerpendicularTo(coreCurves[i], egressVector);
//MessageBox.Show(connectionVector.ToString() + " => " + egressVector.ToString());
Brep egressRegion = Brep.CreateFromSurface(Extrusion.CreateExtrusion(egressRegionProfile, egressVector));
egressExemptionRegions.Add(egressRegion);
}
return(egressExemptionRegions);
}
public static List <Brep> SplitByCurve(Brep brepToSplit, Curve splitter)
{
if (splitter == null)
{
List <Brep> unmodified = new List <Brep>();
unmodified.Add(brepToSplit);
return(unmodified);
}
Brep splitterBrep = Extrusion.CreateExtrusion(splitter, Vector3d.ZAxis).ToBrep();
Brep[] splitBreps = brepToSplit.Split(splitterBrep, 0.1);
List <Brep> result = new List <Brep>(splitBreps);
//MessageBox.Show(result.Count.ToString());
return(result);
}
private Brep ExtrudeCurveBothSide(Curve Crv, Vector3d Direction, bool BothSide, bool IsCape)
{
double Tolerance = Rhino.RhinoDoc.ActiveDoc.ModelAbsoluteTolerance;
if (Direction.Length == 0)
{
this.AddRuntimeMessage(GH_RuntimeMessageLevel.Error, "拉伸向量的长度不能为0");
return(null);
}
if (BothSide)
{
Crv.Transform(Transform.Translation(Direction));
Direction.Reverse();
Direction = Direction * 2;
}
if (Crv.IsPlanar())
{
try
{
Brep Temp = Extrusion.CreateExtrusion(Crv, Direction).ToBrep();
if (IsCape)
{
return(Temp.CapPlanarHoles(Tolerance));
}
else
{
return(Temp);
}
}
catch (Exception e)
{
this.AddRuntimeMessage(GH_RuntimeMessageLevel.Error, string.Format("内部错误：{0}", e.Message));
return(null);
}
}
else
{
this.AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "输入的几何体不符合条件");
return(null);
}
}
protected override void SolveInstance(IGH_DataAccess DA)
{
if (!DA.GetData("Workplane", ref Workplane))
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "Workplane missing. Default used (WorldXY).");
}
if (!DA.GetData("MachineTool", ref Tool))
{
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "MachineTool missing. Default used.");
}
Brep brep = null;
DA.GetData("Brep", ref brep);
bool male = false;
DA.GetData("Male", ref male);
bool flip = false;
DA.GetData("Flip", ref flip);
double angle = 0;
DA.GetData("Angle", ref angle);
double depth = 0;
DA.GetData("Depth", ref depth);
double hdepth = depth / 2;
double hangle = angle / 360 * Math.PI;
Curve[] intersections;
Point3d[] intersection_points;
Rhino.Geometry.Intersect.Intersection.BrepPlane(brep, Workplane, Rhino.RhinoDoc.ActiveDoc.ModelAbsoluteTolerance, out intersections, out intersection_points);
if (intersections.Length < 1)
{
return;
}
Curve[] outline_list = Curve.JoinCurves(intersections);
if (outline_list.Length < 1)
{
return;
}
Curve outline = outline_list[0];
List <Point3d> toolpath_start_points = new List <Point3d>();
BoundingBox bb = intersections[0].GetBoundingBox(Workplane);
double max_x = 0;
double max_y = 0;
for (int i = 0; i < 2; ++i)
{
for (int j = 0; j < 2; ++j)
{
for (int k = 0; k < 2; ++k)
{
max_x = Math.Max(Math.Abs(bb.Corner((i == 1), (j == 1), (k == 1)).X), max_x);
max_y = Math.Max(Math.Abs(bb.Corner((i == 1), (j == 1), (k == 1)).Y), max_y);
}
}
}
List <Point3d> pts = new List <Point3d>();
double step = Math.Tan(hangle) * depth;
Curve[] offsets = outline.Offset(Workplane, step * 2, 0.1, CurveOffsetCornerStyle.Sharp);
outline = offsets[0];
int num_grooves = (int)(max_x / step) + 5;
if (male)
{
depth *= -1;
}
for (int i = -num_grooves; i <= num_grooves; ++i)
{
pts.Add(new Point3d(step * i, -max_y * 2, hdepth * ((Math.Abs(i) % 2) * 2 - 1)));
}
#region Toolpath
int flipper = flip ? 1 : 0;
for (int i = flipper; i < pts.Count; i += 2)
{
toolpath_start_points.Add(new Point3d(pts[i].X, pts[i].Y, 0.0));
}
flipper = flip ? 1 : -1;
List <GH_PPolyline> paths = new List <GH_PPolyline>();
List <Point3d> path_points = new List <Point3d>();
List <Tuple <Point3d, Point3d> > path_pairs = new List <Tuple <Point3d, Point3d> >();
for (int i = 0; i < toolpath_start_points.Count; ++i)
{
Point3d p1 = toolpath_start_points[i];
Point3d p2 = toolpath_start_points[i] + Vector3d.YAxis * max_y * 4;
Polyline temp = new Polyline(new Point3d[] { p1, p2 });
temp.Transform(Transform.PlaneToPlane(Plane.WorldXY, Workplane));
Rhino.Geometry.Intersect.CurveIntersections ci = Rhino.Geometry.Intersect.Intersection.CurveCurve(outline, temp.ToNurbsCurve(), 0.1, 0.01);
if (ci.Count == 2)
{
path_pairs.Add(new Tuple <Point3d, Point3d>(ci[0].PointA + Workplane.ZAxis * hdepth * flipper, ci[1].PointB + Workplane.ZAxis * hdepth * flipper));
}
}
path_points.Add(path_pairs[0].Item1);
path_points.Add(path_pairs[0].Item2);
double d1, d2;
int index = 1;
for (int i = 1; i < path_pairs.Count; ++i)
{
d1 = path_pairs[i].Item1.DistanceTo(path_points[index]);
d2 = path_pairs[i].Item2.DistanceTo(path_points[index]);
if (d1 > d2)
{
path_points.Add(path_pairs[i].Item2);
path_points.Add(path_pairs[i].Item1);
}
else
{
path_points.Add(path_pairs[i].Item1);
path_points.Add(path_pairs[i].Item2);
}
index += 2;
}
paths.Add(new GH_PPolyline(new PPolyline(path_points, Workplane)));
#endregion
Polyline poly = new Polyline(pts);
Brep grooves = Extrusion.CreateExtrusion(poly.ToNurbsCurve(), Vector3d.YAxis * max_y * 4).ToBrep();
grooves.Transform(Transform.PlaneToPlane(Plane.WorldXY, Workplane));
if (!flip)
{
List <Brep> srfs = new List <Brep>();
for (int i = 0; i < grooves.Surfaces.Count; ++i)
{
srfs.Add(Brep.CreateFromSurface(grooves.Surfaces[i].Reverse(0)));
}
grooves = Brep.MergeBreps(srfs, 0.1);
}
Brep[] trims = brep.Trim(grooves, 0.1);
if (trims.Length < 1)
{
throw new Exception("Trim failed!");
}
Brep final = trims[0];
for (int i = 1; i < trims.Length; ++i)
{
final.Join(trims[i], 0.1, true);
}
trims = grooves.Trim(brep, 0.1);
for (int i = 0; i < trims.Length; ++i)
{
final.Join(trims[i], 0.1, true);
}
DA.SetData("Finger Joint", final);
DA.SetDataList("Paths", paths);
}
static public List <Brep> CreateSectionSweeps(WR_Elem3dRcp er)
{
List <Curve> crvs;
List <Brep> eSBreps = new List <Brep>();
// Start and end caps
List <Curve> sCap = new List <Curve>();
List <Curve> eCap = new List <Curve>();
if (CrossSectionCasts.GetSectionPropertyCrvs(er.GetSectionString(), out crvs))
{
// Get x vector
Point3d sPos = er.GetStartPos().ConvertToRhinoPoint();
Point3d ePos = er.GetEndPos().ConvertToRhinoPoint();
Vector3d elX = new Vector3d(ePos.X - sPos.X, ePos.Y - sPos.Y, ePos.Z - sPos.Z);
double elLength = elX.Length;
elX.Unitize();
Vector3d move = elX * elLength;
// Get normal (z vector)
WR_Vector elWrZ = er.GetElementNormal();
Vector3d elZ = new Vector3d(elWrZ.X, elWrZ.Y, elWrZ.Z);
// Get y vector
Vector3d elY = Vector3d.CrossProduct(elZ, elX);
// Rotation to local coordinates
Transform rotTrans = Transform.Rotation(Vector3d.XAxis, Vector3d.YAxis, Vector3d.ZAxis, elX, elY, elZ);
// Add start and end point to a list
List <Point3d> endPts = new List <Point3d> {
sPos, ePos
};
foreach (Curve crv in crvs)
{
// Rotate to local coordinates
crv.Transform(rotTrans);
crv.Translate((Vector3d)sPos);
// Create and add extrusion
Brep extrusion = Extrusion.CreateExtrusion(crv, move).ToBrep();
eSBreps.Add(extrusion);
// Add curve to cap list
sCap.Add(crv);
// Move to end and add
Curve eCrv = (Curve)crv.Duplicate();
eCrv.Translate(move);
eCap.Add(eCrv);
}
// Cap sections
eSBreps.Add(CapSections(sCap));
eSBreps.Add(CapSections(eCap));
}
return(eSBreps);
}
