static void Main(string[] args)
{
//GerberSplitter GS = new GerberSplitter();
//GS.Split("G03*", new GerberLibrary.Core.Primitives.GerberNumberFormat());
//GS.Split("%SRX1Y1I0.00000J1.76100*%", new GerberLibrary.Core.Primitives.GerberNumberFormat(),true);
//Console.WriteLine("{0}", GS.Pairs.Count);
Gerber.ShowProgress = true;
Gerber.DumpSanitizedOutput = true;
Gerber.WriteSanitized = true;
if (args.Count() < 2)
{
Console.WriteLine("usage: ");
Console.WriteLine("GerberCombiner <outputfile> <inputfile1> <inputfile2> <inputfileN> ");
Console.WriteLine("<outputfile>: file to write - if the outputfile extension is .txt, all input files will be treated as excellon");
Console.WriteLine("<inputfileN>: files to load");
return;
}
for (int j = 1; j < args.Count(); j++)
{
if (File.Exists(args[j]) == false)
{
Console.WriteLine("file not found! {0}", args[j]);
return;
}
}
BoardSide S;
BoardLayer L;
var FileType = Gerber.FindFileType(args[1]);
Gerber.DetermineBoardSideAndLayer(args[1], out S, out L);
for (int j = 2; j < args.Count(); j++)
{
var FileType2 = Gerber.FindFileType(args[1]);
Gerber.DetermineBoardSideAndLayer(args[1], out S, out L);
if (FileType2 != FileType)
{
Console.WriteLine("Warning! Filetypes seem to be mismatched! First file ({0}) is a {1}, but {2} is a {3}", args[1], FileType, args[j], FileType2);
}
}
if (FileType == BoardFileType.Drill)
{
List <string> ExcellonFiles = new List <string>();
ExcellonFiles.AddRange(args.Skip(1));
ExcellonFile.MergeAll(ExcellonFiles, args[0], new StandardConsoleLog());
}
else
{
List <string> GerberFiles = new List <string>();
GerberFiles.AddRange(args.Skip(1));
GerberMerger.MergeAll(GerberFiles, args[0], new StandardConsoleLog());
}
// Console.WriteLine("Press any key to continue..");
// Console.ReadKey();
}
private static void RotateFile(string filename, string outfile, string[] args)
{
double dx = 0;
double dy = 0;
double cx = 0;
double cy = 0;
double angle = 0;
if (args.Count() > 2)
{
double.TryParse(args[2], out dx);
}
if (args.Count() > 3)
{
double.TryParse(args[3], out dy);
}
if (args.Count() > 4)
{
double.TryParse(args[4], out cx);
}
if (args.Count() > 5)
{
double.TryParse(args[5], out cy);
}
if (args.Count() > 6)
{
double.TryParse(args[6], out angle);
}
var T = Gerber.FindFileType(filename);
if (T == BoardFileType.Drill)
{
ExcellonFile EF = new ExcellonFile();
EF.Load(filename);
EF.Write(outfile, dx, dy, cx, cy, angle);
}
else
{
BoardSide Side;
BoardLayer Layer;
Gerber.DetermineBoardSideAndLayer(args[0], out Side, out Layer);
GerberTransposer.Transform(filename, outfile, dx, dy, cx, cy, angle);
var lines = PolyLineSet.SanitizeInputLines(System.IO.File.ReadAllLines(args[0]).ToList());
System.IO.File.WriteAllLines(args[0] + "sanit.txt", lines);
Gerber.SaveGerberFileToImage(outfile, outfile + "_render.png", 200, Color.Black, Color.White);
}
}
public void WriteAntennaBoard(double width, double height, double mountholediameter, double cornerrounding, double mountholeclearance, double edgeclearance = 1.26, bool WriteCombinedImage = true, bool WriteImages = false)
{
int polyid = 0;
FontSet FS = FontSet.Load("Font.xml");
List <String> FilesGenerated = new List <string>();
double LabelHeight = 1.2;
//double PadWidth = 1.8;
double DrillWidth = 1.0;
string basename = String.Format("Generated_This_is_not_RocketScience_Antenna_{0}x{1}cm", width / 10.0f, height / 10.0f);
try
{
Directory.CreateDirectory(basename);
}
catch (Exception)
{
}
basename = Path.Combine(basename, String.Format("proto_{0}x{1}cm", width / 10.0f, height / 10.0f));
string OutlineFile = basename + ".gko";
string SilkFileTop = basename + ".gto";
string SilkFileBottom = basename + ".gbo";
string SolderMaskBottom = basename + ".gbs";
string SolderMaskTop = basename + ".gts";
string CopperBottom = basename + ".gbl";
string CopperTop = basename + ".gtl";
string DrillFile = basename + ".txt";
ExcellonFile EF = new ExcellonFile();
ExcellonTool MountHoleDrill = new ExcellonTool();
MountHoleDrill.Radius = mountholediameter / 2.0;
PointD C1 = new PointD(mountholeclearance, mountholeclearance);
PointD C2 = new PointD(width - mountholeclearance, mountholeclearance);
PointD C3 = new PointD(width - mountholeclearance, height - mountholeclearance);
PointD C4 = new PointD(mountholeclearance, height - mountholeclearance);
MountHoleDrill.Drills.Add(C1);
MountHoleDrill.Drills.Add(C2);
MountHoleDrill.Drills.Add(C3);
MountHoleDrill.Drills.Add(C4);
EF.Tools[10] = MountHoleDrill;
ViaDrill.Radius = 0.6 / 2.0;
EF.Tools[11] = ViaDrill;
ExcellonTool ProtoHoleDrill = new ExcellonTool();
ProtoHoleDrill.Radius = DrillWidth / 2.0;
PointD pC1 = new PointD(mountholeclearance, height / 2 - 2.54);
PointD pC2 = new PointD(mountholeclearance, height / 2);
PointD pC3 = new PointD(mountholeclearance, height / 2 + 2.54);
ProtoHoleDrill.Drills.Add(pC1);
ProtoHoleDrill.Drills.Add(pC2);
ProtoHoleDrill.Drills.Add(pC3);
MaskBottom.AddFlash(pC1, 1);
MaskBottom.AddFlash(pC2, 1);
MaskBottom.AddFlash(pC3, 1);
MaskTop.AddFlash(pC1, 1);
MaskTop.AddFlash(pC2, 1);
MaskTop.AddFlash(pC3, 1);
PolyLine PL = new PolyLine(polyid++);
PL.Add(cornerrounding, 0);
PL.Add(width - cornerrounding, 0);
PL.ArcTo(new PointD(width, cornerrounding), new PointD(0, cornerrounding), InterpolationMode.CounterClockwise);
PL.Add(width, height - cornerrounding);
PL.ArcTo(new PointD(width - cornerrounding, height), new PointD(-cornerrounding, 0), InterpolationMode.CounterClockwise);
PL.Add(cornerrounding, height);
PL.ArcTo(new PointD(0, height - cornerrounding), new PointD(0, -cornerrounding), InterpolationMode.CounterClockwise);
PL.Add(0, cornerrounding);
PL.ArcTo(new PointD(cornerrounding, 0), new PointD(cornerrounding, 0), InterpolationMode.CounterClockwise);
PL.Close();
GAW.AddPolyLine(PL, 0);
GAW.Write(OutlineFile);
double AX = C1.X + mountholeclearance;
double AY = C1.Y + mountholeclearance;
double gap = 5;
double W = width - AX * 2;
double H = height - AY * 2 - gap;
int rounds = 6;
antennatracewidth = 0.3 / 2;
double spacing = 0.8;
for (int i = 0; i < rounds; i++)
{
double W2 = W - i * spacing * 2;
double H2 = H - i * spacing * 2;
double W3 = W - (i + 1) * spacing * 2;
double H3 = H - (i + 1) * spacing * 2;
double AX2 = AX + i * spacing;
double AY2 = AY + i * spacing;
double AX3 = AX + (i + 1) * spacing;
double AY3 = AY + (i + 1) * spacing;
PolyLine PL2 = new PolyLine(polyid++);
PL2.Add(AX2, AY2 + H2 / 2);
PL2.Add(AX2, AY2);
PL2.Add(AX2 + W2, AY2);
PL2.Add(AX2 + W2, AY2 + H2 / 2);
AddAntennaTop(PL2);
PolyLine PL3 = new PolyLine(polyid++);
PL3.Add(AX2, AY2 + gap + H2 - (H2 / 2));
PL3.Add(AX2, AY2 + gap + H2);
PL3.Add(AX2 + W2, AY2 + gap + H2);
PL3.Add(AX2 + W2, AY2 + gap + H2 - (H2 / 2));
AddAntennaTop(PL3);
double gs = 2;
if (i % 2 == 1)
{
if (i < rounds - 1)
{
PolyLine PL4 = new PolyLine(polyid++);
PL4.Add(AX2, AY2 + gap + H2 - (H2 / 2));
PL4.Add(AX2, AY2 + gap - gs + H2 - (H2 / 2));
PL4.Add(AX3, AY3 + gs + (H3 / 2));
PL4.Add(AX3, AY3 + (H3 / 2));
AddAntennaTop(PL4);
PolyLine PL5 = new PolyLine(polyid++);
PL5.Add(AX3, AY3 + gap + H3 - (H3 / 2));
PL5.Add(AX2, AY2 + (H2 / 2));
AddAntennaBottom(PL5);
AddAntennaVia(AX3, AY3 + gap + H3 - (H3 / 2));
AddAntennaVia(AX2, AY2 + (H2 / 2));
}
else
{
PolyLine PL4 = new PolyLine(polyid++);
PL4.Add(AX2, AY2 + gap + H2 - (H2 / 2));
PL4.Add(AX2, AY2 + (H2 / 2));
AddAntennaTop(PL4);
AddAntennaVia(AX2, AY2 + H2 / 2 + gap / 2);
PolyLine PL5 = new PolyLine(polyid++);
PL5.Add(AX2, AY2 + H2 / 2 + gap / 2);
PL5.Add(AX2, AY2 + H2 / 2 - gs);
PL5.Add(AX - spacing, AY2 + H2 / 2 - gs);
PL5.Add(AX - spacing, AY2 + H2 / 2 + gap / 2);
AddAntennaVia(AX - spacing, AY2 + H2 / 2 + gap / 2);
AddAntennaBottom(PL5);
}
}
else
{
PolyLine PL4 = new PolyLine(polyid++);
PL4.Add(AX2 + W2, AY2 + gap + H2 - (H2 / 2));
PL4.Add(AX2 + W2, AY2 + gap - gs + H2 - (H2 / 2));
PL4.Add(AX3 + W3, AY3 + gs + (H3 / 2));
PL4.Add(AX3 + W3, AY3 + (H3 / 2));
AddAntennaTop(PL4);
PolyLine PL5 = new PolyLine(polyid++);
PL5.Add(AX3 + W3, AY3 + gap + H3 - (H3 / 2));
PL5.Add(AX2 + W2, AY2 + (H2 / 2));
AddAntennaBottom(PL5);
PolyLine PL6 = new PolyLine(polyid++);
PL6.Add(AX, AY + H / 2);
PL6.Add(pC1.X, pC1.Y);
AddAntennaTop(PL6);
PolyLine PL7 = new PolyLine(polyid++);
PL7.Add(AX, AY + H / 2 + gap);
PL7.Add(pC3.X, pC3.Y);
AddAntennaTop(PL7);
PolyLine PL8 = new PolyLine(polyid++);
PL8.Add(AX - spacing, AY2 + H2 / 2 + gap / 2);
PL8.Add(pC2.X, pC2.Y);
AddAntennaTop(PL8);
AddAntennaVia(AX3 + W3, AY3 + gap + H3 - (H3 / 2));
AddAntennaVia(AX2 + W2, AY2 + (H2 / 2));
}
}
string R = "NFC antenna: " + AntennaLen.ToString("N2") + " mm";
// MaskTop.DrawString(new PointD(width / 2, 5), FS, R, LabelHeight, 0.05, StringAlign.CenterCenter);
// MaskBottom.DrawString(new PointD(width / 2, 5), FS, R, LabelHeight, 0.05, StringAlign.CenterCenter, true);
SilkTop.DrawString(new PointD(width / 2, 5), FS, R, LabelHeight, 0.05, StringAlign.CenterCenter);
SilkBottom.DrawString(new PointD(width / 2, 5), FS, R, LabelHeight, 0.05, StringAlign.CenterCenter, true);
GAWTop.Write(CopperTop);
GAWBottom.Write(CopperBottom);
SilkBottom.Write(SilkFileBottom);
SilkTop.Write(SilkFileTop);
MaskTop.Write(SolderMaskTop);
MaskBottom.Write(SolderMaskBottom);
EF.Tools[12] = ProtoHoleDrill;
EF.Write(DrillFile, 0, 0, 0, 0);
FilesGenerated.Add(CopperBottom);
FilesGenerated.Add(CopperTop);
FilesGenerated.Add(OutlineFile);
FilesGenerated.Add(DrillFile);
FilesGenerated.Add(SilkFileBottom);
FilesGenerated.Add(SilkFileTop);
FilesGenerated.Add(SolderMaskBottom);
FilesGenerated.Add(SolderMaskTop);
if (WriteCombinedImage)
{
GerberImageCreator GIC = new GerberImageCreator();
GIC.AddBoardsToSet(FilesGenerated);
GIC.WriteImageFiles(basename + "_render", 200, false);
}
if (WriteImages)
{
Gerber.SaveGerberFileToImage(OutlineFile, OutlineFile + "_render.png", 1000, Color.Black, Color.White);
Gerber.SaveGerberFileToImage(CopperBottom, CopperBottom + "_render.png", 1000, Color.Black, Color.White);
Gerber.SaveGerberFileToImage(CopperTop, CopperTop + "_render.png", 1000, Color.Black, Color.White);
Gerber.SaveGerberFileToImage(DrillFile, DrillFile + "_render.png", 1000, Color.Black, Color.White);
Gerber.SaveGerberFileToImage(SilkFileTop, SilkFileTop + "_render.png", 1000, Color.Black, Color.White);
Gerber.SaveGerberFileToImage(SilkFileBottom, SilkFileBottom + "_render.png", 1000, Color.Black, Color.White);
}
}
public ParsedGerber AddBoardToSet(ProgressLog log, MemoryStream MS, string _originalfilename, bool forcezerowidth = false, bool precombinepolygons = false, double drillscaler = 1.0)
{
Streams[_originalfilename] = MS;
try
{
// string[] filesplit = originalfilename.Split('.');
// string ext = filesplit[filesplit.Count() - 1].ToLower();
var FileType = Gerber.FindFileTypeFromStream(new StreamReader(MS), _originalfilename);
MS.Seek(0, SeekOrigin.Begin);
if (FileType == BoardFileType.Unsupported)
{
if (Gerber.ExtremelyVerbose)
{
Console.WriteLine("Warning: {1}: files with extension {0} are not supported!", Path.GetExtension(_originalfilename), Path.GetFileName(_originalfilename));
}
return(null);
}
ParsedGerber PLS;
GerberParserState State = new GerberParserState()
{
PreCombinePolygons = precombinepolygons
};
if (FileType == BoardFileType.Drill)
{
if (Gerber.ExtremelyVerbose)
{
Console.WriteLine("Log: Drill file: {0}", _originalfilename);
}
PLS = PolyLineSet.LoadExcellonDrillFileFromStream(log, new StreamReader(MS), _originalfilename, false, drillscaler);
MS.Seek(0, SeekOrigin.Begin);
ExcellonFile EF = new ExcellonFile();
EF.Load(log, new StreamReader(MS), drillscaler);
Excellons.Add(EF);
}
else
{
if (Gerber.ExtremelyVerbose)
{
Console.WriteLine("Log: Gerber file: {0}", _originalfilename);
}
BoardSide Side = BoardSide.Unknown;
BoardLayer Layer = BoardLayer.Unknown;
Gerber.DetermineBoardSideAndLayer(_originalfilename, out Side, out Layer);
if (Layer == BoardLayer.Outline)
{
forcezerowidth = true;
precombinepolygons = true;
}
State.PreCombinePolygons = precombinepolygons;
PLS = PolyLineSet.LoadGerberFileFromStream(log, new StreamReader(MS), _originalfilename, forcezerowidth, false, State);
MS.Seek(0, SeekOrigin.Begin);
PLS.Side = State.Side;
PLS.Layer = State.Layer;
if (Layer == BoardLayer.Outline)
{
PLS.FixPolygonWindings();
}
}
PLS.CalcPathBounds();
BoundingBox.AddBox(PLS.BoundingBox);
Console.WriteLine("Progress: Loaded {0}: {1:N1} x {2:N1} mm", Path.GetFileName(_originalfilename), PLS.BoundingBox.BottomRight.X - PLS.BoundingBox.TopLeft.X, PLS.BoundingBox.BottomRight.Y - PLS.BoundingBox.TopLeft.Y);
PLSs.Add(PLS);
// }
// catch (Exception)
// {
// }
return(PLS);
}
catch (Exception E)
{
while (E != null)
{
Console.WriteLine("Exception adding board: {0}", E.Message);
E = E.InnerException;
}
}
return(null);
}
public static List <String> WriteProtoBoardFlowerStyle(double width, double height, double mountholediameter, double cornerrounding, double mountholeclearance, double edgeclearance = 1.26, bool WriteCombinedImage = true, bool WriteImages = false)
{
FontSet FS = FontSet.Load("Font.xml");
int polyid = 0;
List <String> FilesGenerated = new List <string>();
double LabelHeight = 1.2;
double PadWidth = 1.8;
double DrillWidth = 1.0;
string basename = String.Format("Generated_This_is_not_RocketScience_Flower_prototoboard_{0}x{1}cm", width / 10.0f, height / 10.0f);
try
{
Directory.CreateDirectory(basename);
}
catch (Exception)
{
}
basename = Path.Combine(basename, String.Format("proto_{0}x{1}cm", width / 10.0f, height / 10.0f));
string OutlineFile = basename + ".gko";
string SilkFileTop = basename + ".gto";
string SilkFileBottom = basename + ".gbo";
string SolderMaskBottom = basename + ".gbs";
string SolderMaskTop = basename + ".gts";
string CopperBottom = basename + ".gbl";
string CopperTop = basename + ".gtl";
string DrillFile = basename + ".txt";
int XE = (int)Math.Floor((width - Math.Max(edgeclearance, LabelHeight) * 2) / 2.54);
int YE = (int)Math.Floor((height - Math.Max(edgeclearance, LabelHeight) * 2) / 2.54);
PrepareGridSpace(XE, YE, true, true, 3, 2);
string[][] Grid = new string[XE + 1][];
for (int x = 0; x <= XE; x++)
{
Grid[x] = new string[YE + 1];
for (int y = 0; y <= YE; y++)
{
Grid[x][y] = GridSpaceType(x, y);
if (y == YE)
{
Grid[x][y] = "None";
}
if (x == XE)
{
Grid[x][y] = "None";
}
}
}
double XO = (width / 2) - (XE / 2.0) * 2.54;
double YO = (height / 2) - (YE / 2.0) * 2.54;
Console.WriteLine("{0} rows and {1} columns", YE, XE);
ExcellonFile EF = new ExcellonFile();
PointD C1 = new PointD(0, 0);
PointD C2 = new PointD(width, 0);
PointD C3 = new PointD(width, height);
PointD C4 = new PointD(0, height);
if (mountholediameter > 0)
{
ExcellonTool MountHoleDrill = new ExcellonTool();
MountHoleDrill.Radius = mountholediameter / 2.0;
C1 = new PointD(mountholeclearance, mountholeclearance);
C2 = new PointD(width - mountholeclearance, mountholeclearance);
C3 = new PointD(width - mountholeclearance, height - mountholeclearance);
C4 = new PointD(mountholeclearance, height - mountholeclearance);
MountHoleDrill.Drills.Add(C1);
MountHoleDrill.Drills.Add(C2);
MountHoleDrill.Drills.Add(C3);
MountHoleDrill.Drills.Add(C4);
EF.Tools[10] = MountHoleDrill;
}
ExcellonTool ProtoHoleDrill = new ExcellonTool();
ProtoHoleDrill.Radius = DrillWidth / 2.0;
PolyLine PL = new PolyLine(polyid++);
PL.Add(cornerrounding, 0);
PL.Add(width - cornerrounding, 0);
PL.ArcTo(new PointD(width, cornerrounding), new PointD(0, cornerrounding), InterpolationMode.CounterClockwise);
PL.Add(width, height - cornerrounding);
PL.ArcTo(new PointD(width - cornerrounding, height), new PointD(-cornerrounding, 0), InterpolationMode.CounterClockwise);
PL.Add(cornerrounding, height);
PL.ArcTo(new PointD(0, height - cornerrounding), new PointD(0, -cornerrounding), InterpolationMode.CounterClockwise);
PL.Add(0, cornerrounding);
PL.ArcTo(new PointD(cornerrounding, 0), new PointD(cornerrounding, 0), InterpolationMode.CounterClockwise);
PL.Close();
GerberArtWriter GAW = new GerberArtWriter();
GAW.AddPolyLine(PL, 0);
GAW.Write(OutlineFile);
GerberArtWriter GAWTop = new GerberArtWriter();
GerberArtWriter GAWBottom = new GerberArtWriter();
GerberArtWriter MaskTop = new GerberArtWriter();
GerberArtWriter MaskBottom = new GerberArtWriter();
GerberArtWriter SilkTop = new GerberArtWriter();
GerberArtWriter SilkBottom = new GerberArtWriter();
for (int x = 0; x < XE; x++)
{
double xc = XO + x * 2.54 + 2.54 / 2;
for (int y = 0; y < YE; y++)
{
double yc = YO + y * 2.54 + 2.54 / 2;
PointD P = new PointD(xc, yc);
if ((P - C1).Length() < edgeclearance + mountholediameter / 2 + 1.27)
{
Grid[x][y] = "None";
}
if ((P - C2).Length() < edgeclearance + mountholediameter / 2 + 1.27)
{
Grid[x][y] = "None";
}
if ((P - C3).Length() < edgeclearance + mountholediameter / 2 + 1.27)
{
Grid[x][y] = "None";
}
if ((P - C4).Length() < edgeclearance + mountholediameter / 2 + 1.27)
{
Grid[x][y] = "None";
}
if (Grid[x][y] != "None")
{
GAWTop.AddFlash(new PointD(xc, yc), DrillWidth * 1.3 / 2.0);
GAWBottom.AddFlash(new PointD(xc, yc), DrillWidth * 1.3 / 2.0);
MaskTop.AddFlash(new PointD(xc, yc), DrillWidth * 1.3 / 2.0);
MaskBottom.AddFlash(new PointD(xc, yc), DrillWidth * 1.3 / 2.0);
ProtoHoleDrill.Drills.Add(new PointD(xc, yc));
}
}
}
// SilkTop.DrawString(new PointD(5, 0), FS, "O0O", 5, 0.05, StringAlign.BottomCenter);
// SilkTop.DrawString(new PointD(20, 0), FS, "O0O", 5, 0.05, StringAlign.CenterCenter);
// SilkTop.DrawString(new PointD(40, 0), FS, "OMO", 5, 0.05, StringAlign.TopCenter);
for (int x = 0; x < XE; x++)
{
double xc = XO + x * 2.54 + 2.54 / 2;
double yc = YO + (0) * 2.54;
double yc1 = YO + (YE) * 2.54 + 2.54;
char T = (char)('A' + (char)((x) % 26));
if (Grid[x][0] != "None")
{
SilkTop.DrawString(new PointD(xc, yc), FS, T.ToString(), LabelHeight, 0.05, StringAlign.CenterCenter);
SilkBottom.DrawString(new PointD(xc, yc), FS, T.ToString(), LabelHeight, 0.05, StringAlign.CenterCenter, true);
}
if (Grid[x][YE - 1] != "None")
{
SilkTop.DrawString(new PointD(xc, yc1), FS, T.ToString(), LabelHeight, 0.05, StringAlign.CenterCenter);
SilkBottom.DrawString(new PointD(xc, yc1), FS, T.ToString(), LabelHeight, 0.05, StringAlign.CenterCenter, true);
}
}
for (int y = 0; y < YE; y++)
{
double xc = XO + (0) * 2.54 - 2.54 / 2;
double xc1 = XO + (XE + 1) * 2.54 - 2.54 / 2;
double yc = YO + (y) * 2.54 + 2.54;
if (Grid[0][y] != "None")
{
SilkTop.DrawString(new PointD(xc, yc), FS, (YE - y).ToString(), LabelHeight, 0.05, StringAlign.CenterCenter);
SilkBottom.DrawString(new PointD(xc, yc), FS, (YE - y).ToString(), LabelHeight, 0.05, StringAlign.CenterCenter, true);
}
if (Grid[XE - 1][y] != "None")
{
SilkTop.DrawString(new PointD(xc1, yc), FS, (YE - y).ToString(), LabelHeight, 0.05, StringAlign.CenterCenter);
SilkBottom.DrawString(new PointD(xc1, yc), FS, (YE - y).ToString(), LabelHeight, 0.05, StringAlign.CenterCenter, true);
}
}
PolyLine PL2 = new PolyLine(polyid++);
double rad = 0.6;
for (int i = 0; i < 20; i++)
{
double P = i * Math.PI / 19.0;
PL2.Add(Math.Sin(P) * rad, Math.Cos(P) * rad);
}
PL2.Close();
PL2.Translate(-1.1, 0);
for (int x = -1; x < XE + 1; x++)
{
for (int y = -1; y < YE + 1; y++)
{
string s1 = "None";
if (y >= 0 && y < YE && x < XE)
{
s1 = Grid[x + 1][y];
}
string s2 = "None";
if (x >= 0 && x < XE && y < YE)
{
s2 = Grid[x][y + 1];
}
string s3 = "None";
if (x >= 0 && x < XE && y >= 0 && y < YE)
{
s3 = Grid[x][y];
}
double xc = XO + x * 2.54 + 2.54 / 2;
double yc = YO + y * 2.54 + 2.54 / 2;
double xc1 = XO + (x + 1) * 2.54 + 2.54 / 2;
double yc1 = YO + (y + 1) * 2.54 + 2.54 / 2;
if (s1 != "None" && s3 != "None")
{
PolyLine PLA = PL2.Copy();
PLA.Translate(xc1, yc);
PolyLine PLC = PL2.Copy();
PLC.RotateDegrees(180);
PLC.Translate(xc, yc);
GAWTop.AddPolygon(PLA);
MaskTop.AddPolygon(PLA);
GAWTop.AddPolygon(PLC);
MaskTop.AddPolygon(PLC);
GAWBottom.AddPolygon(PLA);
MaskBottom.AddPolygon(PLA);
GAWBottom.AddPolygon(PLC);
MaskBottom.AddPolygon(PLC);
}
if (s3 != "None" && s2 != "None")
{
PolyLine PLB = PL2.Copy();
PLB.RotateDegrees(90);
PLB.Translate(xc, yc1);
PolyLine PLD = PL2.Copy();
PLD.RotateDegrees(270);
PLD.Translate(xc, yc);
GAWTop.AddPolygon(PLB);
MaskTop.AddPolygon(PLB);
GAWTop.AddPolygon(PLD);
MaskTop.AddPolygon(PLD);
GAWBottom.AddPolygon(PLB);
MaskBottom.AddPolygon(PLB);
GAWBottom.AddPolygon(PLD);
MaskBottom.AddPolygon(PLD);
// GAWTop.AddPolygon(PLD);
// MaskTop.AddPolygon(PLD);
}
}
}
GAWTop.Write(CopperTop);
GAWBottom.Write(CopperBottom);
SilkBottom.Write(SilkFileBottom);
SilkTop.Write(SilkFileTop);
MaskTop.Write(SolderMaskTop);
MaskBottom.Write(SolderMaskBottom);
EF.Tools[11] = ProtoHoleDrill;
EF.Write(DrillFile, 0, 0, 0, 0);
FilesGenerated.Add(CopperBottom);
FilesGenerated.Add(CopperTop);
FilesGenerated.Add(OutlineFile);
FilesGenerated.Add(DrillFile);
FilesGenerated.Add(SilkFileBottom);
FilesGenerated.Add(SilkFileTop);
FilesGenerated.Add(SolderMaskBottom);
FilesGenerated.Add(SolderMaskTop);
if (WriteCombinedImage)
{
GerberImageCreator GIC = new GerberImageCreator();
GIC.AddBoardsToSet(FilesGenerated);
GIC.WriteImageFiles(basename + "_render", 200, false);
}
if (WriteImages)
{
Gerber.SaveGerberFileToImage(OutlineFile, OutlineFile + "_render.png", 1000, Color.Black, Color.White);
Gerber.SaveGerberFileToImage(CopperBottom, CopperBottom + "_render.png", 1000, Color.Black, Color.White);
Gerber.SaveGerberFileToImage(CopperTop, CopperTop + "_render.png", 1000, Color.Black, Color.White);
Gerber.SaveGerberFileToImage(DrillFile, DrillFile + "_render.png", 1000, Color.Black, Color.White);
Gerber.SaveGerberFileToImage(SilkFileTop, SilkFileTop + "_render.png", 1000, Color.Black, Color.White);
Gerber.SaveGerberFileToImage(SilkFileBottom, SilkFileBottom + "_render.png", 1000, Color.Black, Color.White);
}
return(FilesGenerated);
}
private void button1_Click(object sender, EventArgs e)
{
if (saveFileDialog1.ShowDialog() == DialogResult.OK)
{
int polyid = 0;
string fname = System.IO.Path.GetFileName(saveFileDialog1.FileName);
string fnamenoext = System.IO.Path.GetFileNameWithoutExtension(saveFileDialog1.FileName);
string OutName = "";
if (fname.Length != fnamenoext.Length)
{
int extlen = fname.Length - fnamenoext.Length;
OutName = saveFileDialog1.FileName.Substring(0, saveFileDialog1.FileName.Length - extlen);
}
else
{
OutName = saveFileDialog1.FileName;
}
List <string> Files = new List <string>();
double W = (double)innerWidth.Value;
double H = (double)innerHeight.Value;
double TE = (double)topEdge.Value;
double LE = (double)leftEdge.Value;
double OuterWidth = W + LE * 2.0;
double OuterHeight = H + TE * 2.0;
double InnerWidth = W;
double InnerHeight = H;
GerberArtWriter Outline = new GerberArtWriter();
GerberArtWriter TopSilk = new GerberArtWriter();
GerberArtWriter TopCopper = new GerberArtWriter();
GerberArtWriter TopSolderMask = new GerberArtWriter();
GerberArtWriter BottomSilk = new GerberArtWriter();
GerberArtWriter BottomCopper = new GerberArtWriter();
GerberArtWriter BottomSolderMask = new GerberArtWriter();
List <PointD> DrillHoles = new List <PointD>();
double mountholediameter = (double)holeDiameter.Value;
if (addHolesCheck.Checked)
{
double side = LE / 2.0;
double top = TE / 2.0;
DrillHoles.Add(new PointD(side, top));
DrillHoles.Add(new PointD(OuterWidth - side, top));
DrillHoles.Add(new PointD(OuterWidth - side, OuterHeight - top));
DrillHoles.Add(new PointD(side, OuterHeight - top));
ExcellonFile EF = new ExcellonFile();
ExcellonTool MountHoleDrill = new ExcellonTool();
MountHoleDrill.Radius = mountholediameter / 2.0;
foreach (var a in DrillHoles)
{
MountHoleDrill.Drills.Add(a);
}
EF.Tools[10] = MountHoleDrill;
EF.Write(OutName + ".txt", 0, 0, 0, 0);
Files.Add(OutName + ".txt");
}
// board outline
PolyLine PL = new PolyLine(polyid++);
PL.MakeRoundedRect(new PointD(0, 0), new PointD(OuterWidth, OuterHeight), (double)roundedOuterCorners.Value);
Outline.AddPolyLine(PL, 0);
PolyLine PL2 = new PolyLine(polyid++);
PL2.MakeRoundedRect(new PointD(LE, TE), new PointD(InnerWidth + LE, InnerHeight + TE), (double)roundedInnerCorners.Value);
Outline.AddPolyLine(PL2, 0);
#region fiducials
List <PointD> Fiducials = new List <PointD>();
foreach (DataGridViewRow dataRow in fiducialsListData.Rows)
{
PointD fiducialPoint = new PointD();
if (dataRow.Cells != null && dataRow.Cells["XCoordinate"].Value != null && dataRow.Cells["YCoordinate"].Value != null)
{
fiducialPoint.X = double.Parse(dataRow.Cells["XCoordinate"].Value.ToString());
fiducialPoint.Y = double.Parse(dataRow.Cells["YCoordinate"].Value.ToString());
if (string.Equals(dataRow.Cells["fiducialLayer"].Value.ToString(), "Top"))
{
TopCopper.AddFlash(fiducialPoint, double.Parse(dataRow.Cells["fiducialCopperDiameter"].Value.ToString()) / 2.0);
TopSolderMask.AddFlash(fiducialPoint, double.Parse(dataRow.Cells["fiducialSolderMaskDiam"].Value.ToString()) / 2.0);
}
else
{
BottomCopper.AddFlash(fiducialPoint, double.Parse(dataRow.Cells["fiducialCopperDiameter"].Value.ToString()) / 2.0);
BottomSolderMask.AddFlash(fiducialPoint, double.Parse(dataRow.Cells["fiducialSolderMaskDiam"].Value.ToString()) / 2.0);
}
}
}
#endregion
string FrameTitle = FrameTitleBox.Text;
if (FrameTitle.Length > 0)
{
FontSet FS = FontSet.Load("Font.xml");
TopSilk.DrawString(new PointD(OuterWidth / 2.0, OuterHeight - TE / 4.0), FS, FrameTitle + " - top", TE / 4.0, 0.1, StringAlign.CenterCenter);
TopCopper.DrawString(new PointD(OuterWidth / 2.0, OuterHeight - TE / 4.0), FS, FrameTitle + " - top", TE / 4.0, 0.1, StringAlign.CenterCenter);
BottomSilk.DrawString(new PointD(OuterWidth / 2.0, OuterHeight - TE / 4.0), FS, FrameTitle + " - bottom", TE / 4.0, 0.1, StringAlign.CenterCenter, true);
BottomCopper.DrawString(new PointD(OuterWidth / 2.0, OuterHeight - TE / 4.0), FS, FrameTitle + " - bottom", TE / 4.0, 0.1, StringAlign.CenterCenter, true);
}
foreach (var a in DrillHoles)
{
TopSolderMask.AddFlash(a, mountholediameter / 2.0 + 1.0);
BottomSolderMask.AddFlash(a, mountholediameter / 2.0 + 1.0);
}
Outline.Write(OutName + ".gko");
TopSilk.Write(OutName + ".gto");
TopCopper.Write(OutName + ".gtl");
TopSolderMask.Write(OutName + ".gts");
BottomSilk.Write(OutName + ".gbo");
BottomCopper.Write(OutName + ".gbl");
BottomSolderMask.Write(OutName + ".gbs");
Files.Add(OutName + ".gko");
Files.Add(OutName + ".gto");
Files.Add(OutName + ".gtl");
Files.Add(OutName + ".gts");
Files.Add(OutName + ".gbo");
Files.Add(OutName + ".gbl");
Files.Add(OutName + ".gbs");
GerberImageCreator GIC = new GerberImageCreator();
GIC.AddBoardsToSet(Files, new StandardConsoleLog());
GIC.WriteImageFiles(OutName, 50);
// Gerber.SaveGerberFileToImage(OutName + ".gko", OutName + ".gko.png", 200, Color.Black, Color.White);
// Gerber.SaveGerberFileToImage(OutName + ".gto", OutName + ".gto.png", 200, Color.Black, Color.White);
}
}
private void button1_Click(object sender, EventArgs e)
{
if (saveFileDialog1.ShowDialog() == DialogResult.OK)
{
string fname = System.IO.Path.GetFileName(saveFileDialog1.FileName);
string fnamenoext = System.IO.Path.GetFileNameWithoutExtension(saveFileDialog1.FileName);
string OutName = "";
if (fname.Length != fnamenoext.Length)
{
int extlen = fname.Length - fnamenoext.Length;
OutName = saveFileDialog1.FileName.Substring(0, saveFileDialog1.FileName.Length - extlen);
}
else
{
OutName = saveFileDialog1.FileName;
}
List <string> Files = new List <string>();
double W = (double)innerWidth.Value;
double H = (double)innerHeight.Value;
double TE = (double)topEdge.Value;
double LE = (double)leftEdge.Value;
double OuterWidth = W + LE * 2.0;
double OuterHeight = H + TE * 2.0;
double InnerWidth = W;
double InnerHeight = H;
GerberArtWriter Outline = new GerberArtWriter();
GerberArtWriter TopSilk = new GerberArtWriter();
GerberArtWriter TopCopper = new GerberArtWriter();
GerberArtWriter TopSolderMask = new GerberArtWriter();
GerberArtWriter BottomSilk = new GerberArtWriter();
GerberArtWriter BottomCopper = new GerberArtWriter();
GerberArtWriter BottomSolderMask = new GerberArtWriter();
List <PointD> DrillHoles = new List <PointD>();
double mountholediameter = (double)holeDiameter.Value;
if (addHolesCheck.Checked)
{
double side = LE / 2.0;
double top = TE / 2.0;
DrillHoles.Add(new PointD(side, top));
DrillHoles.Add(new PointD(OuterWidth - side, top));
DrillHoles.Add(new PointD(OuterWidth - side, OuterHeight - top));
DrillHoles.Add(new PointD(side, OuterHeight - top));
ExcellonFile EF = new ExcellonFile();
ExcellonTool MountHoleDrill = new ExcellonTool();
MountHoleDrill.Radius = mountholediameter / 2.0;
foreach (var a in DrillHoles)
{
MountHoleDrill.Drills.Add(a);
}
EF.Tools[10] = MountHoleDrill;
EF.Write(OutName + ".txt", 0, 0, 0, 0);
Files.Add(OutName + ".txt");
}
PolyLine PL = new PolyLine();
PL.MakeRoundedRect(new PointD(0, 0), new PointD(OuterWidth, OuterHeight), (double)roundedOuterCorners.Value);
Outline.AddPolyLine(PL, 0);
PolyLine PL2 = new PolyLine();
PL2.MakeRoundedRect(new PointD(LE, TE), new PointD(InnerWidth + LE, InnerHeight + TE), (double)roundedInnerCorners.Value);
Outline.AddPolyLine(PL2, 0);
if (fiducials.Checked)
{
List <PointD> Fiducials = new List <PointD>();
Fiducials.Add(new PointD(LE * 2.0, TE / 2.0));
Fiducials.Add(new PointD(OuterWidth - LE * 2.0, TE / 2.0));
Fiducials.Add(new PointD(OuterWidth - LE * 2.0, OuterHeight - TE / 2.0));
Fiducials.Add(new PointD(LE * 2.0, OuterHeight - TE / 2.0));
Fiducials.Add(new PointD(OuterWidth / 2, TE / 2.0)); //generate extra non symetric fiducial
foreach (var A in Fiducials)
{
TopCopper.AddFlash(A, 1.0);
TopSolderMask.AddFlash(A, 3.0);
}
}
string FrameTitle = FrameTitleBox.Text;
if (FrameTitle.Length > 0)
{
FontSet FS = FontSet.Load("Font.xml");
TopSilk.DrawString(new PointD(OuterWidth / 2.0, OuterHeight - TE / 4.0), FS, FrameTitle + " - top", TE / 4.0, 0.1, StringAlign.CenterCenter);
TopCopper.DrawString(new PointD(OuterWidth / 2.0, OuterHeight - TE / 4.0), FS, FrameTitle + " - top", TE / 4.0, 0.1, StringAlign.CenterCenter);
BottomSilk.DrawString(new PointD(OuterWidth / 2.0, OuterHeight - TE / 4.0), FS, FrameTitle + " - bottom", TE / 4.0, 0.1, StringAlign.CenterCenter, true);
BottomCopper.DrawString(new PointD(OuterWidth / 2.0, OuterHeight - TE / 4.0), FS, FrameTitle + " - bottom", TE / 4.0, 0.1, StringAlign.CenterCenter, true);
}
foreach (var a in DrillHoles)
{
TopSolderMask.AddFlash(a, mountholediameter / 2.0 + 1.0);
BottomSolderMask.AddFlash(a, mountholediameter / 2.0 + 1.0);
}
Outline.Write(OutName + ".gko");
TopSilk.Write(OutName + ".gto");
TopCopper.Write(OutName + ".gtl");
TopSolderMask.Write(OutName + ".gts");
BottomSilk.Write(OutName + ".gbo");
BottomCopper.Write(OutName + ".gbl");
BottomSolderMask.Write(OutName + ".gbs");
Files.Add(OutName + ".gko");
Files.Add(OutName + ".gto");
Files.Add(OutName + ".gtl");
Files.Add(OutName + ".gts");
Files.Add(OutName + ".gbo");
Files.Add(OutName + ".gbl");
Files.Add(OutName + ".gbs");
GerberImageCreator GIC = new GerberImageCreator();
GIC.AddBoardsToSet(Files);
GIC.WriteImageFiles(OutName, 50);
// Gerber.SaveGerberFileToImage(OutName + ".gko", OutName + ".gko.png", 200, Color.Black, Color.White);
// Gerber.SaveGerberFileToImage(OutName + ".gto", OutName + ".gto.png", 200, Color.Black, Color.White);
}
}