public static void GatherAlarmData(SAlarmEvent almEV, short clientNo)
{
AlarmData alm = new AlarmData();
alm.time = DateTime.Now;
alm.isOnOff = almEV.begin;
alm.alarmNo = almEV.alarmNo;
alm.alarmTxt = System.Text.Encoding.Default.GetString(almEV.alarmText).Trim('\0');
LineDevice.CNC result = MainForm.cnclist.Find(
delegate(LineDevice.CNC temp)
{
return(temp.HCNCShareData.sysData.clientNo == clientNo);
}
);
if (result != null)
{
if (MainForm.m_CheckHander != null && MainForm.m_CheckHander.AlarmSendDataEvenHandle != null)
{
EquipmentCheck.AlarmSendData SendMeg = new EquipmentCheck.AlarmSendData();
// SendMeg.alardat = new ScadaHncData.AlarmData();
SendMeg.NeedFindTeX = false;
SendMeg.BujianID = result.BujianID;
SendMeg.alardat = alm;
MainForm.m_CheckHander.AlarmSendDataEvenHandle.BeginInvoke(null, SendMeg, null, null);
}
if (result.HCNCShareData.alarmList.Count == result.HCNCShareData.AlmLstLen)
{
result.HCNCShareData.alarmList.RemoveRange(0, result.HCNCShareData.AlmLstLen / 2);
}
UpdateCurrentAlarmLst(result.HCNCShareData, alm);
}
else if (PLCDataShare.m_plclist != null && PLCDataShare.m_plclist.Count > 0 &&
PLCDataShare.m_plclist[0].m_hncPLCCollector != null && clientNo == Collector.CollectHNCPLC.m_clientNo)//HNC8 PLC报警
{
if (MainForm.m_CheckHander != null && MainForm.m_CheckHander.AlarmSendDataEvenHandle != null)
{
EquipmentCheck.AlarmSendData SendMeg = new EquipmentCheck.AlarmSendData();
// SendMeg.alardat = new ScadaHncData.AlarmData();
SendMeg.NeedFindTeX = false;
SendMeg.BujianID = PLCDataShare.m_plclist[0].m_hncPLCCollector.EQUIP_CODE;
SendMeg.alardat = alm;
MainForm.m_CheckHander.AlarmSendDataEvenHandle.BeginInvoke(null, SendMeg, null, null);
}
}
}
private void ConnectThreadFunc()
{
bool ConnectNoFinish = false;
List <HNCData> ncDatas = new List <HNCData>();
while (true)
{
if (ConnectNoFinish)
{
ConnectNoFinish = false;
ncDatas.Clear();
foreach (CollectHNCData collecncdata in m_gatherHNCLst)
{
if (!collecncdata.hncdata.sysData.isConnect)
{
if (ClientPingTest(collecncdata.hncdata.sysData.addr.ip))
{
collecncdata.hncdata.sysData.clientNo = Instance().HNC_NetConnect(collecncdata.hncdata.sysData.addr.ip, collecncdata.hncdata.sysData.addr.port, true);
if (collecncdata.hncdata.sysData.clientNo >= 0 && collecncdata.hncdata.sysData.clientNo < 256)
{
// for (int hageii = 0; hageii < 10; hageii++)
{
collecncdata.UpDataChAxList();
// if (collecncdata.hncdata.chanDataLst.Count > 0 && collecncdata.hncdata.axlist.Count > 0)
// {
// break;
// }
ncDatas.Add(collecncdata.hncdata);
}
if (collecncdata.hncdata.chanDataLst.Count > 0 && collecncdata.hncdata.axlist.Count > 0)//确保采集器是初始化OK
{
collecncdata.CollectConstData();
if (collecncdata.hncdata.sysData.clientNo >= 0 && collecncdata.hncdata.sysData.clientNo < 256 &&
collecncdata.hncdata.sysData.macSN != null && collecncdata.hncdata.sysData.macSN.Length > 0)
{
collecncdata.threaFucRuningF_OK = true;
collecncdata.Get_Reg_threaFucEvent.Set();
collecncdata.hncdata.sysData.isConnect = true;
if (collecncdata.m_cnc.CNCchanDataEventHandler != null)
{
int[] senddata = new int[2];
senddata[0] = (int)LineDevice.CNC.CNCchanDataEventType.CNCStateChage;
senddata[1] = (int)LineDevice.CNC.CNCState.IDLE;
collecncdata.m_cnc.CNCchanDataEventHandler.BeginInvoke(this, senddata, null, null);
}
AlarmData alm = new AlarmData();
m_Instance.HNC_AlarmRefresh(collecncdata.hncdata.sysData.clientNo);
int alarm_num = 0;
m_Instance.HNC_AlarmGetNum((int)HNCAPI.AlarmType.ALARM_TYPE_ALL, (int)HNCAPI.AlarmLevel.ALARM_ERR, ref alarm_num, collecncdata.hncdata.sysData.clientNo);
for (int i = 0; i < alarm_num; i++)
{
m_Instance.HNC_AlarmGetData((int)HNCAPI.AlarmType.ALARM_TYPE_ALL, //获取所有类型的报警
(int)HNCAPI.AlarmLevel.ALARM_ERR, //仅获取error
i,
ref alm.alarmNo, //获取此报警的唯一ID，可用于报警识别
ref alm.alarmTxt, //报警文本
collecncdata.hncdata.sysData.clientNo);
alm.isOnOff = 1;
if (MainForm.m_CheckHander != null && MainForm.m_CheckHander.AlarmSendDataEvenHandle != null)
{
EquipmentCheck.AlarmSendData SendMeg = new EquipmentCheck.AlarmSendData();
// SendMeg.alardat = new ScadaHncData.AlarmData();
SendMeg.NeedFindTeX = false;
SendMeg.BujianID = collecncdata.m_cnc.BujianID;
SendMeg.alardat.isOnOff = 1;
SendMeg.alardat = alm;
MainForm.m_CheckHander.AlarmSendDataEvenHandle.BeginInvoke(null, SendMeg, null, null);
}
UpdateCurrentAlarmLst(collecncdata.hncdata, alm);
}
SCADA.LogData.EventHandlerSendParm SendParm = new SCADA.LogData.EventHandlerSendParm();
SendParm.Node1NameIndex = (int)SCADA.LogData.Node1Name.Equipment_CNC;
SendParm.LevelIndex = (int)SCADA.LogData.Node2Level.MESSAGE;
SendParm.EventID = ((int)SCADA.LogData.Node2Level.MESSAGE).ToString();
SendParm.Keywords = "CNC采集器开启";
SendParm.EventData = collecncdata.m_cnc.BujianID + ":ip = " + collecncdata.hncdata.sysData.addr.ip
+ " 链接号 = " + collecncdata.hncdata.sysData.clientNo.ToString()
+ " sn = " + collecncdata.hncdata.sysData.macSN;
SCADA.MainForm.m_Log.AddLogMsgHandler.BeginInvoke(this, SendParm, null, null);
}
}
else
{
// SCADA.LogData.EventHandlerSendParm SendParm = new SCADA.LogData.EventHandlerSendParm();
// SendParm.Node1NameIndex = (int)SCADA.LogData.Node1Name.Equipment_CNC;
// SendParm.LevelIndex = (int)SCADA.LogData.Node2Level.消息;
// SendParm.EventID = ((int)SCADA.LogData.Node2Level.消息).ToString();
// SendParm.Keywords = "collecncdata.hncdata.chanDataLst.Count = 0";
// SendParm.EventData = collecncdata.hncdata.sysData.addr.ip;
// SCADA.MainForm.m_Log.AddLogMsgHandler.BeginInvoke(this, SendParm, null, null);
}
}
}
}
if (!collecncdata.hncdata.sysData.isConnect)
{
ConnectNoFinish = true;
}
}
}
else
{
threaFucEvent.WaitOne();
ConnectNoFinish = true;
}
//---------------------------------added by zb 20151105--------------------------start
if (ncDatas.Count > 0)
{
monitor.ProcessConnDatPosi(ncDatas);
}
//---------------------------------added by zb 20151105--------------------------end
// Thread.Sleep(CONNECT_THREAD_SLEEP_TIME);
}
}