void EQP_CarrierIdRead(SecsMessage msg)
{
EAP.Report(new CarrierIDReport {
LoadPortId = GetPortID((byte)msg.SecsItem.Items[2].Items[0].Items[1].Items[0]),
CarrierId = (string)msg.SecsItem.Items[2].Items[0].Items[1].Items[1]
});
}
void EQP_DataCollectionComplete(SecsMessage msg)
{
var tmpList = msg.SecsItem.Items[2].Items[0].Items[1];
var carrier_slot_port = (string)tmpList.Items[1];
var i = carrier_slot_port.IndexOf('.');
var carrierId = carrier_slot_port.Substring(0, i);
var slotNo = Convert.ToByte(carrier_slot_port.Substring(i + 1, 2));
var portNo = carrier_slot_port[carrier_slot_port.Length - 1];
var processJob = GetProcessJob(carrierId, slotNo);
var dc = new DataCollectionReport(processJob);
var dcc = new DataCollectionCompleteReport(processJob);
try {
dc.AddLotData("PJL0", processJob.Id);
dc.AddLotData("CJL0", carrierId);
dc.AddLotData("SNL0", slotNo);
dc.AddLotData("PIL0", Convert.ToByte(portNo));
dc.AddLotData("RIL0", tmpList.Items[2]);
dc.AddLotData("LTL0", (uint)tmpList.Items[3] / 100);
} finally {
EAP.Report(dc);
EAP.Report(dcc);
}
}
void EQP_WaferStatusChange(SecsMessage msg)
{
Item dataList = msg.SecsItem.Items[2].Items[0].Items[1];
string pjId = dataList.Items[0].GetValue <string>();
string carrier_slot_port = (string)dataList.Items[1];
int i = carrier_slot_port.IndexOf('.');
string carrierId = carrier_slot_port.Substring(0, i);
byte slotNo = Convert.ToByte(carrier_slot_port.Substring(i + 1, 2));
string state = dataList.Items[2].GetValue <string>();
switch (state)
{
case "SubstLocChamber":
EAP.Report(new WaferStartReport {
ProcessJobId = GetProcessJob(carrierId, slotNo).Id,
CarrierId = carrierId,
SlotNo = slotNo
});
break;
case "SubstLocLowerArm":
EAP.Report(new WaferEndReport {
ProcessJobId = GetProcessJob(carrierId, slotNo).Id,
CarrierId = carrierId,
SlotNo = slotNo
});
break;
}
}
void EQP_CarrierIDReadFail(SecsMessage msg)
{
byte portNo = (byte)msg.SecsItem.Items[2].Items[0].Items[1].Items[0];
EAP.Report(new CarrierIDReport {
LoadPortId = GetPortID(portNo)
});
}
void EQP_ProcessJobEnd(SecsMessage msg)
{
string id = msg.SecsItem.Items[2].Items[0].Items[1].Items[0].GetString().Trim();
EAP.Report(new ProcessJobEndReport {
ProcessJobID = id
});
EAP.Report(new DataCollectionCompleteReport(GetProcessJob(id)));
}
void EQP_CarrierIDRead(SecsMessage msg)
{
var portNo = (byte)msg.SecsItem.Items[2].Items[0].Items[1].Items[0];
var carrierId = msg.SecsItem.Items[2].Items[0].Items[1].Items[1].GetString().Trim();
EAP.Report(new CarrierIDReport {
LoadPortId = GetPortID(portNo),
CarrierId = carrierId
});
}
void EQP_CarrierIDRead(SecsMessage msg)
{
byte portNo = (byte)msg.SecsItem.Items[2].Items[0].Items[1].Items[0];
string carrierID = msg.SecsItem.Items[2].Items[0].Items[1].Items[1].GetValue <string>().Trim();
EAP.Report(new CarrierIDReport {
LoadPortId = GetPortID(portNo),
CarrierId = carrierID
});
}
async void EQP_LoadComplete(SecsMessage msg)
{
byte portNo = (byte)msg.SecsItem.Items[2].Items[0].Items[1].Items[0];
string portId = GetPortID(portNo);
EAP.Report(new LoadCompReport {
PortID = portId
});
// Wait CarrierIDRead Event 10 sec.
{
// Method 1:
//ThreadPool.QueueUserWorkItem(delegate {
// EapLogger.Notice(portId + " StartAsync CarrierIDRead Timer");
// using (var ev = new ManualResetEvent(false)) {
// var callback = new Action<SecsMessage>(secsMsg => {
// if (portNo == (byte)secsMsg.SecsItem.Items[2].Items[0].Items[1].Items[0])
// ev.Set();
// });
// using (EAP.SubscribeS6F11("CarrierIDRead", callback))
// using (EAP.SubscribeS6F11("CarrierIDReadFail", callback)) {
// if (!ev.WaitOne(10000)) {
// EapLogger.Error(portId + " CarrierIDRead Timeout!!");
// EAP.Report(new CarrierIDReport {
// LoadPortId = portId
// });
// }
// }
// }
//});
}
{
// Method 2:
//EapLogger.Notice(portId + " StartAsync CarrierIDRead Timer");
//var ev = new ManualResetEvent(false);
//var callback = new Action<SecsMessage>(secsMsg => {
// if (portNo == (byte)secsMsg.SecsItem.Items[2].Items[0].Items[1].Items[0])
// ev.Set();
//});
//var read = EAP.SubscribeS6F11("CarrierIDRead", callback);
//var readfail = EAP.SubscribeS6F11("CarrierIDReadFail", callback);
//ThreadPool.RegisterWaitForSingleObject(ev, (state, timeout) => {
// if (read != null)
// read.Dispose();
// if (readfail != null)
// readfail.Dispose();
// if (timeout) {
// EapLogger.Error(portId + " CarrierIDRead Timeout!!");
// EAP.Report(new CarrierIDReport {
// LoadPortId = portId
// });
// }
//}, null, 10000, true);
}
}
void EQP_UnloadComplete(SecsMessage msg)
{
var portId = GetPortID((byte)msg.SecsItem.Items[2].Items[0].Items[1].Items[0]);
EAP.Report(new UnloadCompleteReport {
PortID = portId
});
//清除相關Loadport上的ProcessJob物件
_ProcessingJobs.RemoveAll(pj => pj.Carriers.First().LoadPortId == portId);
}
void EQP_SlotMapReport(SecsMessage msg)
{
byte portNo = (byte)msg.SecsItem.Items[2].Items[0].Items[1].Items[0];
string carrierID = msg.SecsItem.Items[2].Items[0].Items[1].Items[1].GetValue <string>().Trim();
var mapItem = msg.SecsItem.Items[2].Items[0].Items[1].Items[2].Items;
EAP.Report(new SlotMapReport {
LoadPortID = GetPortID(portNo),
CarrierID = carrierID,
Slots = from i in Enumerable.Range(0, mapItem.Count)
where mapItem[i].GetValue <byte>() == 4
select(byte)(i + 1)
});
}
void EQP_SlotMapReport(SecsMessage msg)
{
var portNo = (byte)msg.SecsItem.Items[2].Items[0].Items[1].Items[0];
var carrierId = (string)msg.SecsItem.Items[2].Items[0].Items[1].Items[1];
var map = (string)msg.SecsItem.Items[2].Items[0].Items[1].Items[1 + portNo];
EAP.Report(new SlotMapReport {
LoadPortID = GetPortID(portNo),
CarrierID = carrierId,
Slots = from i in Enumerable.Range(0, map.Length)
where map[i] == '1'
select(byte)(i + 1)
});
}
void EQP_WaferProcessData_PVD(SecsMessage msg)
{
Item tempList = msg.SecsItem.Items[2].Items[0].Items[1].Items[0];
string pjID = tempList.Items[1].GetValue <string>();
byte slotNo = (byte)tempList.Items[4].Items[0].Items[1];
tempList = tempList.Items[4].Items[0].Items[2].Items[0];
string chamber = tempList.Items[0].Items[1].GetValue <string>();
var dc = new DataCollectionReport(GetProcessJob(pjID));
try {
dc.AddLotData("CIWW", chamber);
} finally {
EAP.Report(dc);
}
}
void EQP_DataCollection(SecsMessage msg)
{
var dataList = msg.SecsItem.Items[2].Items[0].Items[1];
var pjId = dataList.Items[0].GetString();
var carrier_slot_port = (string)dataList.Items[1];
var i = carrier_slot_port.IndexOf('.');
var slotNo = Convert.ToByte(carrier_slot_port.Substring(i + 1, 2));
var carrierId = carrier_slot_port.Substring(0, i);
var dc = new DataCollectionReport(GetProcessJob(carrierId, slotNo));
try {
dc.AddWaferData("SNW0", slotNo, slotNo);
dc.AddWaferData("PTW0", slotNo, dataList.Items[2]);
dc.AddWaferData("TXW0", slotNo, (uint)dataList.Items[3] / 100);
dc.AddWaferData("TIW0", slotNo, (uint)dataList.Items[4] / 100);
dc.AddWaferData("TAW0", slotNo, (uint)dataList.Items[5] / 100);
} finally {
EAP.Report(dc);
}
}
async Task QueryPortState()
{
var s1f4 = await EAP.SendAsync(EAP.SecsMessages[1, 3, "QueryPortStatus"]);
for (int i = 0; i < s1f4.SecsItem.Items.Count; i++)
{
switch ((byte)s1f4.SecsItem.Items[i])
{
case 1:
EAP.Report(new ReadyToLoadReport {
PortID = GetPortID(i + 1)
});
break;
case 3:
EAP.Report(new ReadyToUnloadReport {
PortID = GetPortID(i + 1)
});
break;
}
}
}
void EQP_WaferProcessData_LLH_LHC(SecsMessage msg)
{
Item tempList = msg.SecsItem.Items[2].Items[0].Items[1].Items[0];
string pjID = tempList.Items[1].GetValue <string>();
byte slotNo = (byte)tempList.Items[4].Items[0].Items[1];
tempList = tempList.Items[4].Items[0].Items[2].Items[0];
var dc = new DataCollectionReport(GetProcessJob(pjID));
try {
dc.AddWaferData("CIWD", slotNo, tempList.Items[0].Items[1]);
tempList = tempList.Items[2].Items[0].Items[2];
dc.AddWaferData("C1W1", slotNo, tempList.Items[3]);
dc.AddWaferData("C1W2", slotNo, tempList.Items[6]);
dc.AddWaferData("C2W1", slotNo, tempList.Items[9]);
dc.AddWaferData("C2W2", slotNo, tempList.Items[12]);
} finally {
EAP.Report(dc);
}
}
void EQP_ProcessJobStart(SecsMessage msg)
{
EAP.Report(new ProcessJobStartReport {
ProcessJobID = msg.SecsItem.Items[2].Items[0].Items[1].Items[0].GetValue <string>().Trim()
});
}
void EQP_ProcessJobEnd(SecsMessage msg)
{
EAP.Report(new ProcessJobEndReport {
ProcessJobID = (string)msg.SecsItem.Items[2].Items[0].Items[1].Items[0]
});
}
void EQP_ReadyToUnload(SecsMessage msg)
{
EAP.Report(new ReadyToUnloadReport {
PortID = GetPortID((byte)msg.SecsItem.Items[2].Items[0].Items[1].Items[0])
});
}
void EQP_ControlJobStart(SecsMessage msg)
{
EAP.Report(new ControlJobStartReport {
ControlJobID = (string)msg.SecsItem.Items[2].Items[0].Items[1].Items[0]
});
}
void EQP_ControlJobEnd(SecsMessage msg)
{
EAP.Report(new ControlJobEndReport {
ControlJobID = msg.SecsItem.Items[2].Items[0].Items[1].Items[1].GetValue <string>().Trim()
});
}
void EQP_ControlJobStart(SecsMessage msg)
{
EAP.Report(new ControlJobStartReport {
ControlJobID = msg.SecsItem.Items[2].Items[0].Items[1].Items[1].GetString().Trim()
});
}
void EQP_LoadComplete(SecsMessage msg)
{
EAP.Report(new LoadCompReport {
PortID = GetPortID((byte)msg.SecsItem.Items[2].Items[0].Items[1].Items[0])
});
}
