public void GetProperties()
{
DrawingObjectEnumerator drawingObjectEnum = drawingHandler.GetDrawingObjectSelector().GetSelected();
if (drawingObjectEnum.GetSize() == 1)
{
while (drawingObjectEnum.MoveNext())
{
if (drawingObjectEnum.Current is Tekla.Structures.Drawing.View)
{
Tekla.Structures.Drawing.View drawingView = (Tekla.Structures.Drawing.View)drawingObjectEnum.Current;
scale = drawingView.Attributes.Scale.ToString("F02");
sizeXMin = drawingView.RestrictionBox.MinPoint.X.ToString("F02");
sizeXMax = drawingView.RestrictionBox.MaxPoint.X.ToString("F02");
sizeYMin = drawingView.RestrictionBox.MinPoint.Y.ToString("F02");
sizeYMax = drawingView.RestrictionBox.MaxPoint.Y.ToString("F02");
sizeDepthDown = Math.Abs(drawingView.RestrictionBox.MinPoint.Z).ToString("F02");
sizeDepthUp = drawingView.RestrictionBox.MaxPoint.Z.ToString("F02");
viewExtension = drawingView.Attributes.ViewExtensionForNeighbourParts.ToString("F02");
if (drawingView.Attributes.FixedViewPlacing)
{
fixedViewPlacing = Bool.True;
}
else
{
fixedViewPlacing = Bool.False;
}
if (drawingView.Attributes.Shortening.CutParts)
{
cutParts = Bool.True;
}
else
{
cutParts = Bool.False;
}
minimumLength = drawingView.Attributes.Shortening.MinimumLength.ToString("F02");
}
}
}
else if (drawingObjectEnum.GetSize() > 1)
{
scale = "";
sizeXMin = "";
sizeXMax = "";
sizeYMin = "";
sizeYMax = "";
sizeDepthDown = "";
sizeDepthUp = "";
viewExtension = "";
fixedViewPlacing = new Bool();
cutParts = new Bool();
minimumLength = "";
}
}
public static void Run(Tekla.Technology.Akit.IScript akit)
{
DrawingHandler DrawingHandler = new DrawingHandler();
Drawing Drawing = DrawingHandler.GetActiveDrawing();
DrawingObjectEnumerator DrawingObjEnum = Drawing.GetSheet().GetAllObjects();
ArrayList MarkArray = new ArrayList();
ArrayList PartArray = new ArrayList();
while (DrawingObjEnum.MoveNext())
{
if (DrawingObjEnum.Current is MarkBase)
{
MarkArray.Add(DrawingObjEnum.Current);
}
if (DrawingObjEnum.Current is Tekla.Structures.Drawing.Part || DrawingObjEnum.Current is Tekla.Structures.Drawing.Bolt)
{
PartArray.Add(DrawingObjEnum.Current);
}
}
DrawingHandler.GetDrawingObjectSelector().SelectObjects(MarkArray, true);
// part mark properties
akit.Callback("acmd_display_selected_drawing_object_dialog", "", "main_frame");
akit.TabChange("pmark_dial", "Container_2", "gr_mark_general_tab");
akit.PushButton("gr_pmark_place", "pmark_dial");
akit.ValueChange("pmpl_dial", "text_placing_mode", "1");
akit.PushButton("txpl_modify", "pmpl_dial");
akit.PushButton("txpl_cancel", "pmpl_dial");
akit.PushButton("pmark_cancel", "pmark_dial");
// bolt mark properties
akit.Callback("acmd_display_attr_dialog", "smark_dial", "main_frame");
akit.TabChange("smark_dial", "Container_217", "gr_mark_general_tab");
akit.PushButton("gr_smark_place", "smark_dial");
akit.ValueChange("smpl_dial", "text_placing_mode", "1");
akit.PushButton("txpl_modify", "smpl_dial");
akit.PushButton("txpl_cancel", "smpl_dial");
akit.PushButton("smark_cancel", "smark_dial");
// connection mark properties
akit.Callback("acmd_display_attr_dialog", "jmark_dial", "main_frame");
akit.TabChange("jmark_dial", "Container_217", "gr_mark_general_tab");
akit.PushButton("gr_jmark_place", "jmark_dial");
akit.ValueChange("jmpl_dial", "text_placing_mode", "1");
akit.PushButton("txpl_modify", "jmpl_dial");
akit.PushButton("txpl_cancel", "jmpl_dial");
akit.PushButton("jmark_cancel", "jmark_dial");
DrawingHandler.GetDrawingObjectSelector().UnselectAllObjects();
DrawingHandler.GetDrawingObjectSelector().SelectObjects(PartArray, true);
akit.Callback("acmd_update_marks_selected", "", "main_frame");
}
public void GetProperties()
{
DrawingObjectEnumerator drawingObjectEnum = drawingHandler.GetDrawingObjectSelector().GetSelected();
if (drawingObjectEnum.GetSize() == 1)
{
while (drawingObjectEnum.MoveNext())
{
if (drawingObjectEnum.Current is Tekla.Structures.Drawing.Weld)
{
Tekla.Structures.Drawing.Weld drawingWeld = (Tekla.Structures.Drawing.Weld)drawingObjectEnum.Current;
}
}
}
}
private void GetMarks(string MarkType)
{
Model model = new Model();
Tekla.Structures.Model.UI.ModelObjectSelector modelObjectSelector = new Tekla.Structures.Model.UI.ModelObjectSelector();
Drawing drawing = drawingHandler.GetActiveDrawing();
DrawingObjectEnumerator drawingObjectEnumerator = drawingHandler.GetDrawingObjectSelector().GetSelected();
ArrayList SelectedObjectArray = new ArrayList();
ArrayList MarkArray = new ArrayList();
while (drawingObjectEnumerator.MoveNext())
{
if (drawingObjectEnumerator.Current is Tekla.Structures.Drawing.Part)
{
Tekla.Structures.Drawing.Part part = drawingObjectEnumerator.Current as Tekla.Structures.Drawing.Part;
SelectedObjectArray.Add(model.SelectModelObject(new Identifier(part.ModelIdentifier.ID)));
DrawingObjectArray.Add(part);
}
}
modelObjectSelector.Select(SelectedObjectArray);
Tekla.Structures.Model.ModelObjectEnumerator modelObjectEnumerator = model.GetModelObjectSelector().GetSelectedObjects();
while (modelObjectEnumerator.MoveNext())
{
if (modelObjectEnumerator.Current is Tekla.Structures.Model.Part)
{
Tekla.Structures.Model.Part modelPart = modelObjectEnumerator.Current as Tekla.Structures.Model.Part;
string mark = "";
try
{
modelPart.GetReportProperty(MarkType, ref mark);
if (!MarkArray.Contains(mark))
{
MarkArray.Add(mark);
}
}
catch { }
}
}
MarkArray.Sort();
string MarkList = "";
foreach (string strMark in MarkArray)
{
MarkList = strMark + " " + MarkList;
}
Clipboard.SetDataObject(MarkList); richTextBox1.Text = MarkList;
drawingHandler.GetDrawingObjectSelector().SelectObjects(DrawingObjectArray, false);
}
public static void Run(Tekla.Technology.Akit.IScript akit)
{
try
{
Model model = new Model();
DrawingHandler drawingHandler = new DrawingHandler();
DrawingObjectEnumerator drawingObjectEnum = drawingHandler.GetDrawingObjectSelector().GetSelected();
ArrayList ModelObjectArray = new ArrayList();
if (drawingObjectEnum.GetSize() > 0)
{
while (drawingObjectEnum.MoveNext())
{
if (drawingObjectEnum.Current is Tekla.Structures.Drawing.Part)
{
Tekla.Structures.Drawing.Part part = drawingObjectEnum.Current as Tekla.Structures.Drawing.Part;
ModelObjectArray.Add(model.SelectModelObject(new Identifier(part.ModelIdentifier.ID)));
}
if (drawingObjectEnum.Current is Tekla.Structures.Drawing.Bolt)
{
Tekla.Structures.Drawing.Bolt bolt = drawingObjectEnum.Current as Tekla.Structures.Drawing.Bolt;
ModelObjectArray.Add(model.SelectModelObject(new Identifier(bolt.ModelIdentifier.ID)));
}
}
}
Tekla.Structures.Model.UI.ModelObjectSelector modelObjectSelector = new Tekla.Structures.Model.UI.ModelObjectSelector();
modelObjectSelector.Select(ModelObjectArray);
akit.Callback("acmd_display_selected_object_dialog", "", "main_frame");
}
catch { }
}
/// <summary>
/// 绘制上翼板左右倾斜时的零件标记;
/// </summary>
private void DrawPartMarkNormal()
{
mMrPartList.Remove(mMainBeam);
DrawingHandler drawingHandler = new DrawingHandler();
TSD.UI.DrawingObjectSelector DS = drawingHandler.GetDrawingObjectSelector();
foreach (CMrPart mrPart in mMrPartList)
{
CMrMark mrMark = mrPart.GetBeamDoorFrontViewInfo().GetPartMarkNormal();
if (null == mrMark)
{
continue;
}
DS.SelectObject(mrPart.mPartInDrawing);
}
mMrPartList.Add(mMainBeam);
DS.SelectObject(mMainBeam.mPartInDrawing);
//绘制主梁上的螺钉标记;
DrawMainBeamBoltMark(1);
CDimTools.GetInstance().DrawMarkByMacro();
}
public static void Run(Tekla.Technology.Akit.IScript akit)
{
Model model = new Model();
//Tekla.Structures.Model.UI.ModelObjectSelector modelObjectSelector = new Tekla.Structures.Model.UI.ModelObjectSelector();
DrawingHandler dh = new DrawingHandler();
DrawingObjectEnumerator doe = dh.GetDrawingObjectSelector().GetSelected();
while (doe.MoveNext())
{
string CONN_CODE_END1 = "", CONN_CODE_END2 = "";
if (doe.Current is Tekla.Structures.Drawing.Part)
{
Tekla.Structures.Drawing.Part dPart = (Tekla.Structures.Drawing.Part)doe.Current;
Tekla.Structures.Model.Part mPart = (Tekla.Structures.Model.Part)model.SelectModelObject((Identifier)dPart.ModelIdentifier);
if (mPart is Beam)
{
Beam beam = (Beam)mPart;
ViewBase view = dPart.GetView();
mPart.GetUserProperty("CONN_CODE_END1", ref CONN_CODE_END1);
mPart.GetUserProperty("CONN_CODE_END2", ref CONN_CODE_END2);
if (CONN_CODE_END1 != "")
{
Tekla.Structures.Drawing.Text text = new Tekla.Structures.Drawing.Text(view, beam.StartPoint + new Point(200, 200), CONN_CODE_END1, new LeaderLinePlacing(beam.StartPoint));
text.Insert();
}
if (CONN_CODE_END2 != "")
{
Tekla.Structures.Drawing.Text text = new Tekla.Structures.Drawing.Text(view, beam.EndPoint + new Point(200, 200), CONN_CODE_END2, new LeaderLinePlacing(beam.EndPoint));
text.Insert();
}
}
}
}
}
/// <summary>
/// 绘制主梁上螺钉的标记;
/// </summary>
public void DrawMainPartBoltMark()
{
CBeamTopViewSetting beamTopViewSetting = CBeamDimSetting.GetInstance().mTopViewSetting;
bool bNeedMark = beamTopViewSetting.FindMarkValueByName(CBeamTopViewSetting.mstrBolt);
if (!bNeedMark)
{
return;
}
List <CMrBoltArray> mrBoltArrayList = mMainBeam.GetBoltArrayList();
Vector zVector = new Vector(0, 0, 1);
DrawingHandler drawingHandler = new DrawingHandler();
TSD.UI.DrawingObjectSelector DS = drawingHandler.GetDrawingObjectSelector();
foreach (CMrBoltArray mrBoltArray in mrBoltArrayList)
{
//只有与Z轴平行的螺钉组才进行编号;
if (!CDimTools.GetInstance().IsTwoVectorParallel(zVector, mrBoltArray.mNormal))
{
continue;
}
DS.SelectObject(mrBoltArray.mBoltInDrawing);
}
CDimTools.GetInstance().DrawMarkByMacro();
}
/// <summary>
/// 绘制法向与Z轴平行的中间零部件上螺钉的标记;
/// </summary>
public void DrawZNormalMiddleBoltMark()
{
DrawingHandler drawingHandler = new DrawingHandler();
TSD.UI.DrawingObjectSelector DS = drawingHandler.GetDrawingObjectSelector();
foreach (CMrPart mrPart in mMrPartList)
{
Vector normal = mrPart.mNormal;
double minX = mrPart.GetMinXPoint().X;
double maxX = mrPart.GetMaxXPoint().X;
if (!CDimTools.GetInstance().IsTwoVectorParallel(normal, new Vector(0, 0, 1)) || !mrPart.IsHaveBolt())
{
continue;
}
if (CDimTools.GetInstance().CompareTwoDoubleValue(minX, 0) >= 0 ||
CDimTools.GetInstance().CompareTwoDoubleValue(maxX, 0) <= 0)
{
continue;
}
List <CMrBoltArray> mrBoltArrayList = mrPart.GetBoltArrayList();
foreach (CMrBoltArray mrBoltArray in mrBoltArrayList)
{
if (!CDimTools.GetInstance().IsTwoVectorParallel(mrBoltArray.mNormal, new Vector(0, 0, 1)))
{
continue;
}
DS.SelectObject(mrBoltArray.mBoltInDrawing);
}
}
CDimTools.GetInstance().DrawMarkByMacro();
}
/// <summary>
/// 绘制主梁与Y轴平行时的零件标记;
/// </summary>
private void DrawYParallelPartMark()
{
Vector zVector = new Vector(0, 0, 1);
DrawingHandler drawingHandler = new DrawingHandler();
TSD.UI.DrawingObjectSelector DS = drawingHandler.GetDrawingObjectSelector();
foreach (CMrPart mrPart in mMrPartList)
{
Vector normal = mrPart.mNormal;
if (!CDimTools.GetInstance().IsTwoVectorParallel(normal, zVector))
{
continue;
}
DS.SelectObject(mrPart.mPartInDrawing);
//2.对螺钉组进行标注;
List <CMrBoltArray> mrBoltArrayList = mrPart.GetBoltArrayList();
foreach (CMrBoltArray mrBoltArray in mrBoltArrayList)
{
Vector boltNormal = mrBoltArray.mNormal;
if (!CDimTools.GetInstance().IsTwoVectorParallel(boltNormal, zVector))
{
continue;
}
DS.SelectObject(mrBoltArray.mBoltInDrawing);
}
}
CDimTools.GetInstance().DrawMarkByMacro();
}
public static void Run(Tekla.Technology.Akit.IScript akit)
{
try
{
Model model = new Model();
DrawingHandler drawingHandler = new DrawingHandler();
ArrayList ModelObjectArray = new ArrayList();
if (drawingHandler.GetActiveDrawing() != null)
{
DrawingObjectEnumerator drawingObjectEnum = drawingHandler.GetDrawingObjectSelector().GetSelected();
if (drawingObjectEnum.GetSize() > 0)
{
while (drawingObjectEnum.MoveNext())
{
Tekla.Structures.Drawing.ModelObject dModelObject = (Tekla.Structures.Drawing.ModelObject)drawingObjectEnum.Current;
ModelObjectArray.Add(model.SelectModelObject(dModelObject.ModelIdentifier));
}
}
Tekla.Structures.Model.UI.ModelObjectSelector modelObjectSelector = new Tekla.Structures.Model.UI.ModelObjectSelector();
modelObjectSelector.Select(ModelObjectArray);
}
akit.Callback("acmdZoomToSelected", "", "main_frame");
}
catch { }
}
public static void Run(Tekla.Technology.Akit.IScript akit)
{
var handler = new DrawingHandler();
var selection = handler.GetDrawingObjectSelector().GetSelected();
PointList pointlist = new PointList();
List <double> X = new List <double>();
List <double> Y = new List <double>();
while (selection.MoveNext())
{
if (selection.Current is Polygon)
{
Polygon polygon = selection.Current as Polygon;
pointlist = polygon.Points;
foreach (Point i in pointlist)
{
X.Add(i.X);
Y.Add(i.Y);
}
}
}
int n = X.Count;
double area = polygonArea(X, Y, n) / 1000000;
string msg = String.Format("Polygon area is: {0} m2", Math.Round(area, 3));
System.Windows.Forms.MessageBox.Show(msg);
}
/// <summary>
/// 绘制主梁法向朝X方向的零件标记;
/// </summary>
private void DrawXVectorPartMark()
{
DrawingHandler drawingHandler = new DrawingHandler();
TSD.UI.DrawingObjectSelector DS = drawingHandler.GetDrawingObjectSelector();
foreach (CMrPart mrPart in mMrPartList)
{
Vector vector = mrPart.mNormal;
if (!CDimTools.GetInstance().IsTwoVectorParallel(vector, new Vector(0, 0, 1)))
{
continue;
}
if (!mrPart.IsHaveBolt())
{
continue;
}
DS.SelectObject(mrPart.mPartInDrawing);
//2.绘制螺钉组标记;
List <CMrBoltArray> mrBoltArrayList = mrPart.GetBoltArrayList();
foreach (CMrBoltArray mrBoltArray in mrBoltArrayList)
{
if (CDimTools.GetInstance().IsTwoVectorParallel(mrBoltArray.mNormal, new Vector(0, 0, 1)))
{
DS.SelectObject(mrBoltArray.mBoltInDrawing);
}
}
}
CDimTools.GetInstance().DrawMarkByMacro();
}
/// <summary>
/// 绘制主梁法向朝Y方向的零件标记;
/// </summary>
private void DrawYVectorPartMark()
{
BuildLeftAndRightPart();
DrawingHandler drawingHandler = new DrawingHandler();
TSD.UI.DrawingObjectSelector DS = drawingHandler.GetDrawingObjectSelector();
foreach (CMrPart mrPart in mMrPartList)
{
Vector normal = mrPart.mNormal;
//如果零件的法向量与Z轴平行;
if (CDimTools.GetInstance().IsTwoVectorParallel(normal, new Vector(0, 0, 1)))
{
DS.SelectObject(mrPart.mPartInDrawing);
List <CMrBoltArray> mrBoltArrayList = mrPart.GetBoltArrayList();
foreach (CMrBoltArray mrBoltArray in mrBoltArrayList)
{
if (CDimTools.GetInstance().IsTwoVectorParallel(mrBoltArray.mNormal, new Vector(0, 0, 1)))
{
DS.SelectObject(mrBoltArray.mBoltInDrawing);
}
}
}
else if (CDimTools.GetInstance().IsTwoVectorParallel(normal, new Vector(1, 0, 0)))
{
DS.SelectObject(mrPart.mPartInDrawing);
}
}
CDimTools.GetInstance().DrawMarkByMacro();
}
public static void Run(Tekla.Technology.Akit.IScript akit)
{
var handler = new DrawingHandler();
var selection = handler.GetDrawingObjectSelector().GetSelected();
DrawingHandler.SetMessageExecutionStatus(DrawingHandler.MessageExecutionModeEnum.BY_COMMIT);
double rotang = 0;
while (selection.MoveNext())
{
if (selection.Current is MarkBase)
{
MarkBase mark = selection.Current as MarkBase;
mark.Attributes.RotationAngle = rotang;
mark.Attributes.PlacingAttributes.IsFixed = true;
mark.Modify();
}
else
{
Text text = selection.Current as Text;
text.Attributes.Angle = rotang;
text.Attributes.PlacingAttributes.IsFixed = true;
text.Modify();
}
}
DrawingHandler.SetMessageExecutionStatus(DrawingHandler.MessageExecutionModeEnum.INSTANT);
handler.GetActiveDrawing().CommitChanges();
}
public static void Run(Tekla.Technology.Akit.IScript akit)
{
try
{
Model model = new Model();
DrawingHandler drawingHandler = new DrawingHandler();
ArrayList ModelObjectArray = new ArrayList();
if (drawingHandler.GetActiveDrawing() != null)
{
DrawingObjectEnumerator drawingObjectEnum = drawingHandler.GetDrawingObjectSelector().GetSelected();
while (drawingObjectEnum.MoveNext())
{
Tekla.Structures.Drawing.ModelObject dModelObject = (Tekla.Structures.Drawing.ModelObject)drawingObjectEnum.Current;
ModelObjectArray.Add(model.SelectModelObject(dModelObject.ModelIdentifier));
}
}
else
{
ModelObjectEnumerator modelObjectEnum = model.GetModelObjectSelector().GetSelectedObjects();
while (modelObjectEnum.MoveNext())
{
Tekla.Structures.Model.ModelObject modelObject = (Tekla.Structures.Model.ModelObject)modelObjectEnum.Current;
ModelObjectArray.Add(model.SelectModelObject(modelObject.Identifier));
}
}
Tekla.Structures.Model.UI.ModelObjectSelector modelObjectSelector = new Tekla.Structures.Model.UI.ModelObjectSelector();
modelObjectSelector.Select(ModelObjectArray);
akit.Callback("acmdCreateViewBySelectedObjectsExtrema", "", "main_frame");
akit.Callback("acmd_interrupt", "", "main_frame");
}
catch { }
}
/// <summary>
/// 绘制主梁法向与Y轴平行时的零件标记;
/// </summary>
private void DrawYVectorMark()
{
DrawingHandler drawingHandler = new DrawingHandler();
TSD.UI.DrawingObjectSelector DS = drawingHandler.GetDrawingObjectSelector();
Vector xVector = new Vector(1, 0, 0);
Vector yVector = new Vector(0, 1, 0);
Vector zVector = new Vector(0, 0, 1);
//1.绘制带螺钉的板的零件标记;
foreach (CMrPart mrPart in mMrPartList)
{
double minY = mrPart.GetMinYPoint().Y;
double maxY = mrPart.GetMaxYPoint().Y;
Vector normal = mrPart.mNormal;
//如果法向与Z轴平行并且有螺钉;
if (CDimTools.GetInstance().IsTwoVectorParallel(normal, zVector) && mrPart.IsHaveBolt())
{
DS.SelectObject(mrPart.mPartInDrawing);
//2.绘制螺钉标记;
List <CMrBoltArray> mrBoltArrayList = mrPart.GetBoltArrayList();
foreach (CMrBoltArray mrBoltArray in mrBoltArrayList)
{
if (CDimTools.GetInstance().IsTwoVectorParallel(mrBoltArray.mNormal, zVector))
{
DS.SelectObject(mrBoltArray.mBoltInDrawing);
}
}
}
//如果法向与Z轴平行没有螺钉（暂且判定为凸起的螺帽）;
else if (CDimTools.GetInstance().IsTwoVectorParallel(normal, zVector) && !mrPart.IsHaveBolt())
{
if (minY > 0 || maxY < 0)
{
DS.SelectObject(mrPart.mPartInDrawing);
}
}
//如果法向与Y轴平行;
else if (CDimTools.GetInstance().IsTwoVectorParallel(normal, yVector))
{
if (minY > 0 || maxY < 0)
{
DS.SelectObject(mrPart.mPartInDrawing);
}
}
}
CDimTools.GetInstance().DrawMarkByMacro();
}
public void GetProperties()
{
DrawingObjectEnumerator drawingObjectEnum = drawingHandler.GetDrawingObjectSelector().GetSelected();
if (drawingObjectEnum.GetSize() == 1)
{
while (drawingObjectEnum.MoveNext())
{
if (drawingObjectEnum.Current is Tekla.Structures.Drawing.Bolt)
{
Tekla.Structures.Drawing.Bolt drawingBolt = (Tekla.Structures.Drawing.Bolt)drawingObjectEnum.Current;
boltRepresentation = drawingBolt.Attributes.Representation;
if (drawingBolt.Attributes.SymbolContainsAxis)
{
symbolContainsAxis = Bool.True;
}
else
{
symbolContainsAxis = Bool.False;
}
if (drawingBolt.Attributes.SymbolContainsHole)
{
symbolContainsHole = Bool.True;
}
else
{
symbolContainsHole = Bool.False;
}
colour = drawingBolt.Attributes.Color;
}
}
}
else if (drawingObjectEnum.GetSize() > 1)
{
boltRepresentation = new Bolt.Representation();
symbolContainsAxis = new Bool();
SymbolContainsHole = new Bool();
colour = new DrawingColors();
}
}
public void GetProperties()
{
DrawingObjectEnumerator drawingObjectEnum = drawingHandler.GetDrawingObjectSelector().GetSelected();
if (drawingObjectEnum.GetSize() == 1)
{
while (drawingObjectEnum.MoveNext())
{
if (drawingObjectEnum.Current is Tekla.Structures.Drawing.Mark)
{
Tekla.Structures.Drawing.Mark drawingMark = (Tekla.Structures.Drawing.Mark)drawingObjectEnum.Current;
frameColour = drawingMark.Attributes.Frame.Color;
frameType = (FrameTypeEnum)Enum.Parse(typeof(FrameTypeEnum), drawingMark.Attributes.Frame.Type.ToString());
}
}
}
else if (drawingObjectEnum.GetSize() > 1)
{
frameColour = new DrawingColors();
FrameType = new FrameTypeEnum();
}
}
public void GetProperties()
{
DrawingObjectEnumerator drawingObjectEnum = drawingHandler.GetDrawingObjectSelector().GetSelected();
if (drawingObjectEnum.GetSize() == 1)
{
while (drawingObjectEnum.MoveNext())
{
if (drawingObjectEnum.Current is Tekla.Structures.Drawing.Symbol)
{
Tekla.Structures.Drawing.Symbol drawingSymbol = (Tekla.Structures.Drawing.Symbol)drawingObjectEnum.Current;
angle = drawingSymbol.Attributes.Angle.ToString();
colour = drawingSymbol.Attributes.Color;
frameColour = drawingSymbol.Attributes.Frame.Color;
frameType = (FrameTypeEnum)Enum.Parse(typeof(FrameTypeEnum), drawingSymbol.Attributes.Frame.Type.ToString());
height = drawingSymbol.Attributes.Height.ToString();
insertionPoint = drawingSymbol.InsertionPoint;
string placing = drawingSymbol.Placing.ToString().Replace("Tekla.Structures.Drawing.", "");
placingType = (PlacingTypeEnum)Enum.Parse(typeof(PlacingTypeEnum), placing);
symbolFile = drawingSymbol.SymbolInfo.SymbolFile;
symbolIndex = drawingSymbol.SymbolInfo.SymbolIndex.ToString();
}
}
}
else if (drawingObjectEnum.GetSize() > 1)
{
angle = "";
colour = new DrawingColors();
frameColour = new DrawingColors();
frameType = new FrameTypeEnum();
height = "";
insertionPoint = null;
placingType = new PlacingTypeEnum();
symbolFile = "";
symbolIndex = "";
}
}
private void button1_Click(object sender, EventArgs e)
{
// select objects
ArrayList array = new ArrayList();
DrawingHandler drawingHandler = new DrawingHandler();
Drawing drawing = drawingHandler.GetActiveDrawing();
ContainerView containerView = drawing.GetSheet();
DrawingObjectEnumerator drawingObjEnum = containerView.GetObjects();
foreach (DrawingObject dobj in drawingObjEnum)
{
array.Add(dobj);
}
drawingHandler.GetDrawingObjectSelector().SelectObjects(array, false);
}
/// <summary>
/// 绘制零件标记;
/// </summary>
public void DrawPartMark()
{
mViewBase.Select();
DrawingHandler drawingHandler = new DrawingHandler();
TSD.UI.DrawingObjectSelector DS = drawingHandler.GetDrawingObjectSelector();
foreach (CMrPart mrPart in mMrPartList)
{
if (mrPart.IsNeedAddMark())
{
DS.SelectObject(mrPart.mPartInDrawing);
}
}
CDimTools.GetInstance().DrawMarkByMacro();
}
/// <summary>
/// 绘制檩托板的零件标记;
/// </summary>
private void DrawMrApronPlateMark()
{
DrawingHandler drawingHandler = new DrawingHandler();
TSD.UI.DrawingObjectSelector DS = drawingHandler.GetDrawingObjectSelector();
Dictionary <CMrPart, CMrApronPlate> mapPartToMrApronPlate = CMrCylinderDoorFrontManager.GetInstance().mMapYNormalPartToMrApronPlate;
foreach (CMrApronPlate mrApronPlate in mapPartToMrApronPlate.Values)
{
CMrPart yNormalPart = mrApronPlate.mYNormalPart;
CMrPart zNormalPart = mrApronPlate.mZNormalPart;
DS.SelectObject(yNormalPart.mPartInDrawing);
DS.SelectObject(zNormalPart.mPartInDrawing);
}
CDimTools.GetInstance().DrawMarkByMacro();
}
/// <summary>
/// 绘制零件标记;
/// </summary>
public void DrawPartMark()
{
DrawingHandler drawingHandler = new DrawingHandler();
TSD.UI.DrawingObjectSelector DS = drawingHandler.GetDrawingObjectSelector();
foreach (CMrPart mrPart in mMrPartList)
{
CMrMark mrMark = mrPart.GetCylinderDoorTopViewInfo().GetPartMark();
if (null == mrMark)
{
continue;
}
DS.SelectObject(mrPart.mPartInDrawing);
}
CDimTools.GetInstance().DrawMarkByMacro();
}
/// <summary>
/// 绘制主梁上面的螺钉标记;
/// </summary>
private void DrawMainBeamBoltMark()
{
DrawingHandler drawingHandler = new DrawingHandler();
TSD.UI.DrawingObjectSelector DS = drawingHandler.GetDrawingObjectSelector();
List <CMrBoltArray> mrBoltArrayList = mMainBeam.GetBoltArrayList();
foreach (CMrBoltArray mrBoltArray in mrBoltArrayList)
{
if (!CDimTools.GetInstance().IsTwoVectorParallel(mrBoltArray.mNormal, new Vector(0, 0, 1)))
{
continue;
}
DS.SelectObject(mrBoltArray.mBoltInDrawing);
}
CDimTools.GetInstance().DrawMarkByMacro();
}
/// <summary>
/// 绘制主梁上的螺钉标记;
/// </summary>
/// <param name="nFlag">nFlag=1：上翼板是倾斜。nFlag=2:上翼板向两侧倾斜</param>
private void DrawMainBeamBoltMark(int nFlag)
{
List <CMrBoltArray> mrBoltArrayList = mMainBeam.GetBoltArrayList();
Vector zVector = new Vector(0, 0, 1);
DrawingHandler drawingHandler = new DrawingHandler();
TSD.UI.DrawingObjectSelector DS = drawingHandler.GetDrawingObjectSelector();
foreach (CMrBoltArray mrBoltArray in mrBoltArrayList)
{
//只有与Z轴平行的螺钉组才进行编号;
if (!CDimTools.GetInstance().IsTwoVectorParallel(zVector, mrBoltArray.mNormal))
{
continue;
}
DS.SelectObject(mrBoltArray.mBoltInDrawing);
}
}
public static void Run(Tekla.Technology.Akit.IScript akit)
{
DrawingHandler myDrawingHandler = new DrawingHandler();
if (myDrawingHandler.GetConnectionStatus())
{
DrawingObjectEnumerator selectedObjects = myDrawingHandler.GetDrawingObjectSelector().GetSelected();
while (selectedObjects.MoveNext())
{
if (selectedObjects.Current is StraightDimensionSet)
{
StraightDimensionSet curDimSet = selectedObjects.Current as TSD.StraightDimensionSet;
TSD.ContainerElement LUT = curDimSet.Attributes.LeftUpperTag as TSD.ContainerElement;
TSD.ContainerElement RUT = curDimSet.Attributes.RightUpperTag as TSD.ContainerElement;
curDimSet.Attributes.LeftUpperTag = RUT;
curDimSet.Attributes.RightUpperTag = LUT;
curDimSet.Modify();
}
}
}
}
public static void Run(Tekla.Technology.Akit.IScript akit)
{
DrawingHandler myDrawingHandler = new DrawingHandler();
if (myDrawingHandler.GetConnectionStatus())
{
DrawingObjectEnumerator selectedObjects = myDrawingHandler.GetDrawingObjectSelector().GetSelected();
while (selectedObjects.MoveNext())
{
if (selectedObjects.Current is StraightDimensionSet)
{
StraightDimensionSet curDimSet = selectedObjects.Current as TSD.StraightDimensionSet;
TSD.ContainerElement LUT = curDimSet.Attributes.LeftUpperTag as TSD.ContainerElement;
TSD.ContainerElement RUT = curDimSet.Attributes.RightUpperTag as TSD.ContainerElement;
curDimSet.Attributes.LeftUpperTag = RUT;
curDimSet.Attributes.RightUpperTag = LUT;
curDimSet.Modify();
}
}
}
}
/// <summary>
/// 初始化柱子的轴线;
/// </summary>
private void InitCylinderGridLine()
{
if (null == mViewBase)
{
return;
}
DrawingObjectEnumerator gridLines = mViewBase.GetAllObjects(typeof(TSD.GridLine));
DrawingHandler drawingHandler = new DrawingHandler();
TSD.UI.DrawingObjectSelector DS = drawingHandler.GetDrawingObjectSelector();
while (gridLines.MoveNext())
{
GridLine gridLine = gridLines.Current as GridLine;
if (gridLine == null)
{
continue;
}
Point startPoint = gridLine.StartLabel.CenterPoint;
Point endPoint = gridLine.EndLabel.CenterPoint;
Vector gridlineDirectionNormal = new Vector(endPoint.X - startPoint.X, endPoint.Y - startPoint.Y, endPoint.Z - startPoint.Z);
if (!CDimTools.GetInstance().IsTwoVectorParallel(gridlineDirectionNormal, new Vector(1, 0, 0)))
{
continue;
}
Point intersectionPoint = CDimTools.GetInstance().ComputeTwoLineIntersectPoint(startPoint, endPoint, new Point(0, 0, 0), new Point(0, 1000, 0));
mIntersectionPointList.Add(intersectionPoint);
}
}
private void CopyObjects_Click(object sender, EventArgs e)
{
try
{
selectedObjects = drawingHandler.GetDrawingObjectSelector().GetSelected();
selectedObjectsArray.Clear();
selectedPartsArray.Clear();
selectedViewsArray.Clear();
foreach (DrawingObject drawingObject in selectedObjects)
{
if (drawingObject is Tekla.Structures.Drawing.Part)
{
Tekla.Structures.Drawing.Part drawingPart = (Tekla.Structures.Drawing.Part)drawingObject;
selectedPartsArray.Add(drawingPart.ModelIdentifier);
v = (Tekla.Structures.Drawing.View)drawingPart.GetView();
}
if (drawingObject is Tekla.Structures.Drawing.View)
{
selectedViewsArray.Add(drawingObject);
}
if (drawingObject is Tekla.Structures.Drawing.GraphicObject)
{
selectedObjectsArray.Add(drawingObject);
}
if (drawingObject is Tekla.Structures.Drawing.Text)
{
selectedObjectsArray.Add(drawingObject);
}
}
int count = selectedObjectsArray.Count + selectedPartsArray.Count + selectedViewsArray.Count;
statusLabel.Text = count.ToString() + " objects copied";
}
catch { }
}
public static void Run(Tekla.Technology.Akit.IScript akit)
{
try
{
Model model = new Model();
DrawingHandler drawingHandler = new DrawingHandler();
Drawing drawing = drawingHandler.GetActiveDrawing();
if (drawing != null)
{
Tekla.Structures.Drawing.StraightDimension sd = null;
Tekla.Structures.Drawing.Bolt bolt = null;
DrawingObjectEnumerator drawingObjectEnum = drawingHandler.GetDrawingObjectSelector().GetSelected();
while (drawingObjectEnum.MoveNext())
{
if (drawingObjectEnum.Current is Tekla.Structures.Drawing.StraightDimension)
{
sd = (Tekla.Structures.Drawing.StraightDimension)drawingObjectEnum.Current;
}
if (drawingObjectEnum.Current is Tekla.Structures.Drawing.Bolt)
{
bolt = (Tekla.Structures.Drawing.Bolt)drawingObjectEnum.Current;
}
}
if (bolt == null)
{
Tekla.Structures.Drawing.UI.Picker picker = drawingHandler.GetPicker();
DrawingObject drawingObject = null;
Tekla.Structures.Drawing.ViewBase viewBase = null;
Tekla.Structures.Geometry3d.Point pickedPoint = null;
Type[] TypeFilter = new Type[] { typeof(Tekla.Structures.Drawing.Bolt) };
picker.PickObject("pick bolt", TypeFilter, out drawingObject, out viewBase, out pickedPoint);
bolt = (Tekla.Structures.Drawing.Bolt)drawingObject;
}
Tekla.Structures.Model.BoltGroup mBolt = (Tekla.Structures.Model.BoltGroup)model.SelectModelObject((Identifier)bolt.ModelIdentifier);
string note = "";
if (mBolt is BoltArray)
{
BoltArray boltArray = (BoltArray)mBolt;
if (boltArray.GetBoltDistYCount() == 1 && boltArray.GetBoltDistY(0) == 0)
{
note = (mBolt.BoltPositions.Count - 1).ToString() + " No SPACES @ " + boltArray.GetBoltDistX(1).ToString() + " = ";
}
if (boltArray.GetBoltDistY(0) > 0)
{
}
}
else if (mBolt is BoltXYList)
{
BoltXYList boltXYList = (BoltXYList)mBolt;
note = (boltXYList.BoltPositions.Count - 1).ToString() + " STAGGERED No SPACES @ " + (boltXYList.GetBoltDistX(1)).ToString() + " = ";
}
Tekla.Structures.Drawing.UI.DrawingObjectSelector drawingObjectSelector = drawingHandler.GetDrawingObjectSelector();
drawingObjectSelector.SelectObject(sd);
akit.ValueChange("main_frame", "gr_sel_dimension", "1");
akit.Callback("acmd_display_attr_dialog", "dim_dial", "main_frame");
akit.PushButton("dim_set", "dim_dial");
akit.TabChange("dim_dial", "tabWndDimAttrib", "tabMarks");
akit.PushButton("dim_on_off", "dim_dial");
akit.ValueChange("dim_dial", "txtFldPrefix", note);
akit.PushButton("dim_modify", "dim_dial");
akit.PushButton("dim_cancel", "dim_dial");
}
}
catch { }
}