public IDrawObject CreateObject(string type, UnitPoint point, ISnapPoint snapPoint)
{
DrawObjectBase drawObjectBase = this.CreateObject(type);
if (drawObjectBase != null)
{
drawObjectBase.InitializeFromModel(point, snapPoint);
}
return(drawObjectBase as IDrawObject);
}
public void ArrayRectangle()
{
//确认板材位置，所有图形最大尺寸
GetAllDrawingsMaxMinPoint(allDrawObjects, out UnitPoint maxPoint, out UnitPoint minPoint);
//获取布满坐标
//左下角坐标
UnitPoint p1 = new UnitPoint(maxPoint.X + 10, maxPoint.Y - arrayFullModel.PlateHeight);
UnitPoint p2 = new UnitPoint(maxPoint.X + 10 + arrayFullModel.PlateWidth, maxPoint.Y);
//计算数量
CalRowAndColCount(drawObjects, out int rowCount, out int colCount);
if (rowCount <= 0 || colCount <= 0)
{
return;
}
marginDrawObjects = new List <IDrawObject>();
int rowCoeff = 1;
int colCoeff = 1;
//偏移间距
UnitPoint offset = new UnitPoint(arrayFullModel.PartsSpacing, arrayFullModel.PartsSpacing);
//零件左下角坐标
GetAllDrawingsMaxMinPoint(drawObjects, out UnitPoint maxDrawObjectPoint, out UnitPoint minDrawObjectPoint);
// UnitPoint drawObjectPoint = minDrawObjectPoint;
//计算偏移距离
float thWidth = UCCanvas.GetThresholdWidth();
double ofx = maxDrawObjectPoint.X - minDrawObjectPoint.X - thWidth;
double ofy = maxDrawObjectPoint.Y - minDrawObjectPoint.Y - thWidth;
int objcount = GlobalModel.TotalDrawObjectCount;
for (int i = 0; i < rowCount; i++)
{
for (int j = 0; j < colCount; j++)
{
for (int k = 0; k < drawObjects.Count; k++)
{
IDrawObject drawObject = drawObjects[k].Clone();
drawObject.GroupParam.FigureSN = ++objcount;
if (i == 0 && j == 0)
{
drawObject.Move(new UnitPoint((p1.X - minDrawObjectPoint.X - thWidth / 2 + arrayFullModel.PlateRetainEdge), (p1.Y - minDrawObjectPoint.Y - thWidth / 2 + arrayFullModel.PlateRetainEdge)));
}
else
{
double movex = (p1.X - minDrawObjectPoint.X - thWidth / 2 + arrayFullModel.PlateRetainEdge);
movex = (movex + (j * (offset.X + ofx * colCoeff)));
double movey = (p1.Y - minDrawObjectPoint.Y - thWidth / 2 + arrayFullModel.PlateRetainEdge);
movey = movey + (i * (offset.Y + ofy * rowCoeff));
drawObject.Move(new UnitPoint(movex, movey));
}
marginDrawObjects.Add(drawObject);
}
}
}
double offsetWidth = (colCount - 1) * offset.X + colCount * ofx * colCoeff + arrayFullModel.PlateRetainEdge;
double offsetHeight = (rowCount - 1) * offset.Y + rowCount * ofy * rowCoeff + arrayFullModel.PlateRetainEdge;
double totalwidth = arrayFullModel.PlateWidth - arrayFullModel.PlateRetainEdge;
double totalheight = arrayFullModel.PlateHeight - arrayFullModel.PlateRetainEdge;
double lastWidth = totalwidth - offsetWidth;
double lastHeight = totalheight - offsetHeight;
//旋转
List <IDrawObject> ldrawobjectsnew = new List <IDrawObject>();
for (int k = 0; k < drawObjects.Count; k++)
{
IDrawObject drawObject = drawObjects[k].Clone();
IDrawTranslation drawTranslation = drawObject as IDrawTranslation;
{
UnitPoint centerAxis = new UnitPoint((maxDrawObjectPoint.X + minDrawObjectPoint.X) / 2, (maxDrawObjectPoint.Y + minDrawObjectPoint.Y) / 2);
drawTranslation.DoRotate(centerAxis, 90, false);
}
ldrawobjectsnew.Add(drawObject);
}
//确认旋转后最大尺寸
GetAllDrawingsMaxMinPoint(ldrawobjectsnew, out UnitPoint maxPointc, out UnitPoint minPointc);
///偏移距离
double ofcx = maxPointc.X - minPointc.X - thWidth;
double ofcy = maxPointc.Y - minPointc.Y - thWidth;
if (lastWidth > (offset.X + ofcx))
{
CalRowAndColCount2(drawObjects, lastWidth, ofcx + offset.X, totalheight, ofcy + offset.Y, out int rowCount1, out int colCount1);
//左下角坐标
UnitPoint pc1 = new UnitPoint(maxPoint.X + 10 + offsetWidth, maxPoint.Y - arrayFullModel.PlateHeight);
for (int i = 0; i < rowCount1; i++)
{
for (int j = 0; j < colCount1; j++)
{
for (int k = 0; k < drawObjects.Count; k++)
{
IDrawObject drawObject = ldrawobjectsnew[k].Clone();
drawObject.GroupParam.FigureSN = ++objcount;
if (i == 0 && j == 0)
{
drawObject.Move(new UnitPoint((pc1.X - minPointc.X - thWidth / 2) + arrayFullModel.PartsSpacing, (pc1.Y - minPointc.Y - thWidth / 2) + arrayFullModel.PlateRetainEdge));
}
else
{
drawObject.Move(
new UnitPoint(
((pc1.X - minPointc.X - thWidth / 2) + arrayFullModel.PartsSpacing + (j * (offset.X + ofcx * colCoeff))),
((pc1.Y - minPointc.Y - thWidth / 2) + arrayFullModel.PlateRetainEdge + (i * (offset.Y + ofcy * rowCoeff)))
)
);
}
marginDrawObjects.Add(drawObject);
}
}
}
}
if (lastHeight > (offset.Y + ofcy))
{
//CalRowAndColCount1(drawObjects, totalwidth ,lastHeight, out int rowCount1, out int colCount1);
CalRowAndColCount2(drawObjects, totalwidth, ofcx + offset.X, lastHeight, ofcy + offset.Y, out int rowCount1, out int colCount1);
//左下角坐标
UnitPoint pc1 = new UnitPoint(maxPoint.X + 10, maxPoint.Y - arrayFullModel.PlateHeight + offsetHeight);
for (int i = 0; i < rowCount1; i++)
{
for (int j = 0; j < colCount1; j++)
{
for (int k = 0; k < ldrawobjectsnew.Count; k++)
{
IDrawObject drawObject = ldrawobjectsnew[k].Clone();
drawObject.GroupParam.FigureSN = ++objcount;
if (i == 0 && j == 0)
{
drawObject.Move(new UnitPoint((pc1.X - minPointc.X - thWidth / 2 + arrayFullModel.PlateRetainEdge), (pc1.Y - minPointc.Y - thWidth / 2) + arrayFullModel.PartsSpacing));
}
else
{
drawObject.Move(
new UnitPoint(
((pc1.X - minPointc.X - thWidth / 2 + arrayFullModel.PlateRetainEdge) + (j * (offset.X + ofcx * colCoeff))),
((p1.Y - minPointc.Y - thWidth / 2 + offsetHeight + arrayFullModel.PartsSpacing) + (i * (offset.Y + ofcy * rowCoeff)))
)
);
}
marginDrawObjects.Add(drawObject);
}
}
}
}
IDrawObject NewDrawObject = uCCanvas.Model.CreateObject("SingleRectangle", p1, null);
NewDrawObject.OnMouseDown(uCCanvas.canvasWrapper, p2, null, null);
DrawObjectBase drawData = NewDrawObject as DrawObjectBase;
GlobalModel.TotalDrawObjectCount--;
NewDrawObject.GroupParam.FigureSN = objcount + 1;
drawData.IsBoard = true;
marginDrawObjects.Add(NewDrawObject);
if (drawData != null)
{
drawData.LayerId = (int)WSX.GlobalData.Model.LayerId.White;
}
if (GlobalModel.Params.ArrayFull.IsClearOriginalCompleted)
{
marginDrawObjects.ForEach(s => s.GroupParam.FigureSN = s.GroupParam.FigureSN - drawObjects.Count);
uCCanvas.Model.ArrayObjects(drawObjects, marginDrawObjects);
}
else
{
uCCanvas.Model.ArrayObjects(null, marginDrawObjects);
}
uCCanvas.Model.DrawingLayer.UpdateSN();
}
public override void Copy(DrawObjectBase drawObjectBase)
{
base.Copy(drawObjectBase);
}
