public SerializedCurvySpline(CurvySpline spline, CurvySerializationSpace space = CurvySerializationSpace.WorldSpline)
{
if (spline)
{
Name = spline.name;
P = (space == CurvySerializationSpace.Self) ? spline.transform.localPosition : spline.transform.position;
R = (space == CurvySerializationSpace.Self) ? spline.transform.localRotation.eulerAngles : spline.transform.rotation.eulerAngles;
Interpolation = spline.Interpolation;
Keep2D = spline.RestrictTo2D;
Closed = spline.Closed;
AutoEndTangents = spline.AutoEndTangents;
Orientation = spline.Orientation;
BzAutoDist = spline.AutoHandleDistance;
CacheDensity = spline.CacheDensity;
Pooling = spline.UsePooling;
Threading = spline.UseThreading;
CheckTForm = spline.CheckTransform;
UpdateIn = spline.UpdateIn;
ControlPoints = new SerializedCurvySplineSegment[spline.ControlPointCount];
for (int i = 0; i < spline.ControlPointCount; i++)
{
ControlPoints[i] = new SerializedCurvySplineSegment(spline.ControlPoints[i]);
}
}
}
/// <summary>
/// Sets Bezier Handles by interpolating between Control Points
/// </summary>
/// <param name="interpolation">the interpolation to use</param>
/// <param name="offset">the offset in F (0..1)</param>
/// <param name="freeMoveHandles">whether Handles should be moved individually</param>
/// <param name="controlPoints">the Control Points to set the Handles for</param>
public static void InterpolateBezierHandles(CurvyInterpolation interpolation, float offset, bool freeMoveHandles, params CurvySplineSegment[] controlPoints)
{
if (controlPoints.Length == 0)
{
return;
}
offset = UnityEngine.Mathf.Clamp01(offset);
foreach (CurvySplineSegment cp in controlPoints)
{
cp.FreeHandles = freeMoveHandles;
CurvySplineSegment other = cp.PreviousSegment;
if (other)
{
cp.HandleInPosition = other.Interpolate(1 - offset, interpolation);
}
else
{
cp.HandleInPosition = cp.Interpolate(0, interpolation);
}
if (freeMoveHandles)
{
if (cp.IsValidSegment)
{
cp.HandleOutPosition = cp.Interpolate(offset, interpolation);
}
else
{
cp.HandleInPosition = UnityEngine.Vector3.zero;
}
}
}
controlPoints[0].Spline.Refresh();
}
/// <summary>
/// Interpolates position for a local F
/// </summary>
/// <param name="localF">a local F in the range 0..1</param>
/// <param name="interpolation">the interpolation to use</param>
/// <returns>the interpolated position</returns>
public Vector3 Interpolate(float localF, CurvyInterpolation interpolation)
{
localF = Mathf.Clamp01(localF);
switch (interpolation)
{
case CurvyInterpolation.Bezier:
return(CurvySpline.Bezier(HandleOutScaled, Transform.position, NextTransform.position, NextControlPoint.HandleInScaled, localF));
case CurvyInterpolation.CatmulRom:
//return CurvySpline.CatmulRom(PreviousTransform.position, Transform.position, NextTransform.position, NextControlPoint.NextTransform.position, localF);
return(CurvySpline.CatmulRom(GetPrevPosition(), Transform.position, GetNextPosition(), GetNextNextPosition(), localF));
case CurvyInterpolation.TCB:
float t0 = StartTension; float t1 = EndTension;
float c0 = StartContinuity; float c1 = EndContinuity;
float b0 = StartBias; float b1 = EndBias;
if (!OverrideGlobalTension)
{
t0 = t1 = Spline.Tension;
}
if (!OverrideGlobalContinuity)
{
c0 = c1 = Spline.Continuity;
}
if (!OverrideGlobalBias)
{
b0 = b1 = Spline.Bias;
}
return(CurvySpline.TCB(PreviousTransform.position, Transform.position, NextTransform.position, NextControlPoint.NextTransform.position, localF, t0, c0, b0, t1, c1, b1));
default: // LINEAR
return(Vector3.Lerp(Transform.position, NextTransform.position, localF));
}
}
/// <summary>
/// Sets basic spline parameters
/// </summary>
protected void PrepareSpline(CurvyInterpolation interpolation, CurvyOrientation orientation = CurvyOrientation.Dynamic, int cachedensity = 50, bool closed = true)
{
#if UNITY_EDITOR
if (!Application.isPlaying)
{
Undo.RecordObject(Spline, "Apply Shape");
}
#endif
Spline.Interpolation = interpolation;
Spline.Orientation = orientation;
Spline.CacheDensity = cachedensity;
Spline.Closed = closed;
Spline.RestrictTo2D = this is CurvyShape2D;
}
CurvySpline CreateSpline(CurvyInterpolation type, int points, int granularity)
{
CurvySpline spl = CurvySpline.Create();
spl.Interpolation = type;
spl.Granularity = granularity;
spl.Closed = false;
spl.ShowGizmos = false;
spl.AutoEndTangents = true;
for (int i = 0; i < points; i++)
{
spl.Add(null, false).Position = Random.insideUnitCircle * 10;
}
spl.RefreshImmediately();
return(spl);
}
static void LoadRuntimeSettings()
{
if (!PlayerPrefs.HasKey("Curvy_MaxCachePPU"))
{
SaveRuntimeSettings();
}
MaxCachePPU = DTUtility.GetPlayerPrefs <int>("Curvy_MaxCachePPU", MaxCachePPU);
SceneViewResolution = DTUtility.GetPlayerPrefs <float>("Curvy_SceneViewResolution", SceneViewResolution);
DefaultGizmoColor = DTUtility.GetPlayerPrefs <Color>("Curvy_DefaultGizmoColor", DefaultGizmoColor);
DefaultGizmoSelectionColor = DTUtility.GetPlayerPrefs <Color>("Curvy_DefaultGizmoSelectionColor", DefaultGizmoColor);
DefaultInterpolation = DTUtility.GetPlayerPrefs <CurvyInterpolation>("Curvy_DefaultInterpolation", DefaultInterpolation);
GizmoControlPointSize = DTUtility.GetPlayerPrefs <float>("Curvy_ControlPointSize", GizmoControlPointSize);
GizmoOrientationLength = DTUtility.GetPlayerPrefs <float>("Curvy_OrientationLength", GizmoOrientationLength);
GizmoOrientationColor = DTUtility.GetPlayerPrefs <Color>("Curvy_OrientationColor", GizmoOrientationColor);
Gizmos = DTUtility.GetPlayerPrefs <CurvySplineGizmos>("Curvy_Gizmos", Gizmos);
SplineLayer = DTUtility.GetPlayerPrefs <int>("Curvy_SplineLayer", SplineLayer);
}
public static void InterpolateBezierHandles(CurvyInterpolation interpolation, float offset, bool?freeMoveHandles, params CurvySplineSegment[] controlPoints)
{
if (controlPoints.Length == 0)
{
return;
}
offset = Mathf.Clamp01(offset);
foreach (CurvySplineSegment cp in controlPoints)
{
bool movestate = freeMoveHandles.HasValue ? freeMoveHandles.Value : cp.FreeHandles;
cp.FreeHandles = movestate;
CurvySplineSegment other = cp.PreviousSegment;
if (other)
{
cp.HandleIn = other.Interpolate(1 - offset, interpolation) - cp.transform.localPosition;
}
else
{
cp.HandleIn = cp.Interpolate(0, interpolation);
}
if (cp.FreeHandles)
{
if (cp.IsValidSegment)
{
cp.HandleOut = cp.Interpolate(offset, interpolation) - cp.transform.localPosition;
}
else
{
cp.HandleIn = Vector3.zero;
}
}
}
controlPoints[0].Spline.Refresh();
}
/// <summary>
/// Interpolates position for a local F
/// </summary>
/// <param name="localF">a local F in the range 0..1</param>
/// <param name="interpolation">the interpolation to use</param>
/// <returns>the interpolated position</returns>
public Vector3 Interpolate(float localF, CurvyInterpolation interpolation)
{
localF = Mathf.Clamp01(localF);
switch (interpolation) {
case CurvyInterpolation.Bezier:
return CurvySpline.Bezier(HandleOutScaled,Transform.position, NextTransform.position, NextControlPoint.HandleInScaled, localF);
case CurvyInterpolation.CatmulRom:
//return CurvySpline.CatmulRom(PreviousTransform.position, Transform.position, NextTransform.position, NextControlPoint.NextTransform.position, localF);
return CurvySpline.CatmulRom(GetPrevPosition(), Transform.position, GetNextPosition(), GetNextNextPosition(), localF);
case CurvyInterpolation.TCB:
float t0=StartTension;float t1=EndTension;
float c0=StartContinuity;float c1=EndContinuity;
float b0=StartBias;float b1=EndBias;
if (!OverrideGlobalTension)
t0 = t1 = Spline.Tension;
if (!OverrideGlobalContinuity)
c0 = c1 = Spline.Continuity;
if (!OverrideGlobalBias)
b0 = b1 = Spline.Bias;
return CurvySpline.TCB(PreviousTransform.position, Transform.position, NextTransform.position, NextControlPoint.NextTransform.position, localF, t0, c0, b0, t1, c1, b1);
default: // LINEAR
return Vector3.Lerp(Transform.position, NextTransform.position, localF);
}
}
void OnGUI()
{
GUILayout.BeginVertical(GUI.skin.box);
GUILayout.Label("Curvy offers various options to fine-tune performance vs. precision balance:");
// Interpolation
GUILayout.BeginHorizontal();
GUILayout.Label("Interpolation: ");
if (GUILayout.Toggle(mInterpolation == CurvyInterpolation.Linear, "Linear", GUI.skin.button))
{
mInterpolation = CurvyInterpolation.Linear;
}
if (GUILayout.Toggle(mInterpolation == CurvyInterpolation.Bezier, "Bezier", GUI.skin.button))
{
mInterpolation = CurvyInterpolation.Bezier;
}
if (GUILayout.Toggle(mInterpolation == CurvyInterpolation.CatmullRom, "CatmullRom", GUI.skin.button))
{
mInterpolation = CurvyInterpolation.CatmullRom;
}
if (GUILayout.Toggle(mInterpolation == CurvyInterpolation.TCB, "TCB", GUI.skin.button))
{
mInterpolation = CurvyInterpolation.TCB;
}
GUILayout.EndHorizontal();
// Orientation
GUILayout.BeginHorizontal();
GUILayout.Label("Orientation: ");
if (GUILayout.Toggle(mOrientation == CurvyOrientation.None, "None", GUI.skin.button))
{
mOrientation = CurvyOrientation.None;
}
if (GUILayout.Toggle(mOrientation == CurvyOrientation.Static, "Static", GUI.skin.button))
{
mOrientation = CurvyOrientation.Static;
}
if (GUILayout.Toggle(mOrientation == CurvyOrientation.Dynamic, "Dynamic", GUI.skin.button))
{
mOrientation = CurvyOrientation.Dynamic;
}
GUILayout.EndHorizontal();
// CP-Count
GUILayout.BeginHorizontal();
GUILayout.Label("Control Points (max): " + mControlPointCount.ToString());
mControlPointCount = (int)GUILayout.HorizontalSlider(mControlPointCount, 2, 1000);
GUILayout.EndHorizontal();
// Length
GUILayout.BeginHorizontal();
GUILayout.Label("Total spline length: " + mTotalSplineLength.ToString());
mTotalSplineLength = (int)GUILayout.HorizontalSlider(mTotalSplineLength, 5, 10000);
GUILayout.EndHorizontal();
// Cache
GUILayout.BeginHorizontal();
GUILayout.Label("Cache Density: " + mCacheSize.ToString());
mCacheSize = (int)GUILayout.HorizontalSlider(mCacheSize, 1, 100);
GUILayout.EndHorizontal();
mUseCache = GUILayout.Toggle(mUseCache, "Use Cache (where applicable)");
mUseMultiThreads = GUILayout.Toggle(mUseMultiThreads, "Use Multiple Threads (where applicable)");
GUILayout.Label("Select Test:");
int sel = GUILayout.SelectionGrid(Mathf.Max(0, mCurrentTest), mTests.ToArray(), 4);
if (sel != mCurrentTest)
{
mCurrentTest = sel;
Timer.Clear();
mTestResults.Clear();
mGUIMethod = GetType().GetMethod("GUI_" + mTests[mCurrentTest], BindingFlags.NonPublic | BindingFlags.Instance);
mRunMethod = GetType().GetMethod("Test_" + mTests[mCurrentTest], BindingFlags.NonPublic | BindingFlags.Instance);
}
GUILayout.Space(5);
if (mGUIMethod != null)
{
mGUIMethod.Invoke(this, null);
}
GUI.enabled = !mExecuting && mRunMethod != null;
string label = (mExecuting) ? "Please wait..." : "Run (" + LOOPS + " times)";
if (GUILayout.Button(label))
{
mExecuting = true;
Timer.Clear();
mTestResults.Clear();
Invoke("runTest", .5f);
}
GUI.enabled = true;
if (Timer.Count > 0)
{
foreach (var s in mTestResults)
{
GUILayout.Label(s);
}
GUILayout.Label(string.Format("Average (ms): {0:0.0000}", Timer.AverageMS));
GUILayout.Label(string.Format("Minimum (ms): {0:0.0000}", Timer.MinimumMS));
GUILayout.Label(string.Format("Maximum (ms): {0:0.0000}", Timer.MaximumMS));
}
GUILayout.EndVertical();
}
/// <summary>
/// Gets the interpolated position for a certain TF
/// </summary>
/// <remarks>TF (Total Fragment) relates to the total length of the spline</remarks>
/// <param name="tf">TF value identifying position on spline (0..1)</param>
/// <param name="interpolation">the interpolation to use</param>
/// <returns>the interpolated position</returns>
public override Vector3 Interpolate(float tf, CurvyInterpolation interpolation)
{
float localF;
CurvySplineSegment seg = TFToSegment(tf, out localF);
return seg.Interpolate(localF, interpolation);
}
/// <summary>
/// Sets Bezier Handles by interpolating between Control Points
/// </summary>
/// <param name="interpolation">the interpolation to use</param>
/// <param name="offset">the offset in F (0..1)</param>
/// <param name="freeMoveHandles">whether Handles should be moved individually</param>
/// <param name="controlPoints">the Control Points to set the Handles for</param>
public static void InterpolateBezierHandles(CurvyInterpolation interpolation, float offset, bool freeMoveHandles, params CurvySplineSegment[] controlPoints)
{
if (controlPoints.Length == 0) return;
offset = Mathf.Clamp01(offset);
foreach (CurvySplineSegment cp in controlPoints) {
cp.FreeHandles = freeMoveHandles;
CurvySplineSegment other = cp.PreviousSegment;
if (other)
cp.HandleInPosition = other.Interpolate(1 - offset, interpolation);
else
cp.HandleInPosition = cp.Interpolate(0, interpolation);
if (freeMoveHandles) {
if (cp.IsValidSegment)
cp.HandleOutPosition = cp.Interpolate(offset, interpolation);
else
cp.HandleInPosition = Vector3.zero;
}
}
controlPoints[0].Spline.Refresh();
}
/// <summary>
/// Sets basic spline parameters
/// </summary>
protected void PrepareSpline(CurvyInterpolation interpolation, CurvyOrientation orientation = CurvyOrientation.Dynamic, int cachedensity = 50, bool closed = true)
{
#if UNITY_EDITOR
if (!Application.isPlaying)
Undo.RecordObject(Spline, "Apply Shape");
#endif
Spline.Interpolation = interpolation;
Spline.Orientation = orientation;
Spline.CacheDensity = cachedensity;
Spline.Closed = closed;
Spline.RestrictTo2D = this is CurvyShape2D;
}
CurvySpline CreateSpline(CurvyInterpolation type, int points, int granularity)
{
CurvySpline spl = CurvySpline.Create();
spl.Interpolation = type;
spl.Granularity = granularity;
spl.Closed = false;
spl.ShowGizmos = false;
spl.AutoEndTangents = true;
for (int i = 0; i < points; i++)
spl.Add(null, false).Position = Random.insideUnitCircle * 10;
spl.RefreshImmediately();
return spl;
}
void OnGUI()
{
GUILayout.BeginVertical(GUI.skin.box);
GUILayout.Label("Curvy offers various options to fine-tune performance vs. precision balance:");
// Interpolation
GUILayout.BeginHorizontal();
GUILayout.Label("Interpolation: ");
if (GUILayout.Toggle(mInterpolation == CurvyInterpolation.Linear, "Linear", GUI.skin.button))
mInterpolation=CurvyInterpolation.Linear;
if (GUILayout.Toggle(mInterpolation == CurvyInterpolation.Bezier, "Bezier", GUI.skin.button))
mInterpolation=CurvyInterpolation.Bezier;
if (GUILayout.Toggle(mInterpolation == CurvyInterpolation.CatmullRom, "CatmullRom", GUI.skin.button))
mInterpolation = CurvyInterpolation.CatmullRom;
if (GUILayout.Toggle(mInterpolation == CurvyInterpolation.TCB, "TCB", GUI.skin.button))
mInterpolation = CurvyInterpolation.TCB;
GUILayout.EndHorizontal();
// Orientation
GUILayout.BeginHorizontal();
GUILayout.Label("Orientation: ");
if (GUILayout.Toggle(mOrientation == CurvyOrientation.None, "None", GUI.skin.button))
mOrientation = CurvyOrientation.None;
if (GUILayout.Toggle(mOrientation == CurvyOrientation.Static, "Static", GUI.skin.button))
mOrientation = CurvyOrientation.Static;
if (GUILayout.Toggle(mOrientation == CurvyOrientation.Dynamic, "Dynamic", GUI.skin.button))
mOrientation = CurvyOrientation.Dynamic;
GUILayout.EndHorizontal();
// CP-Count
GUILayout.BeginHorizontal();
GUILayout.Label("Control Points (max): " + mControlPointCount.ToString());
mControlPointCount = (int)GUILayout.HorizontalSlider(mControlPointCount, 2, 1000);
GUILayout.EndHorizontal();
// Length
GUILayout.BeginHorizontal();
GUILayout.Label("Total spline length: " + mTotalSplineLength.ToString());
mTotalSplineLength = (int)GUILayout.HorizontalSlider(mTotalSplineLength, 5, 10000);
GUILayout.EndHorizontal();
// Cache
GUILayout.BeginHorizontal();
GUILayout.Label("Cache Density: "+mCacheSize.ToString());
mCacheSize=(int)GUILayout.HorizontalSlider(mCacheSize, 1, 100);
GUILayout.EndHorizontal();
mUseCache=GUILayout.Toggle(mUseCache, "Use Cache (where applicable)");
mUseMultiThreads = GUILayout.Toggle(mUseMultiThreads, "Use Multiple Threads (where applicable)");
GUILayout.Label("Select Test:");
int sel=GUILayout.SelectionGrid(Mathf.Max(0,mCurrentTest), mTests.ToArray(),4);
if (sel != mCurrentTest)
{
mCurrentTest = sel;
Timer.Clear();
mTestResults.Clear();
mGUIMethod = GetType().GetMethod("GUI_"+mTests[mCurrentTest], BindingFlags.NonPublic | BindingFlags.Instance);
mRunMethod = GetType().GetMethod("Test_"+mTests[mCurrentTest], BindingFlags.NonPublic | BindingFlags.Instance);
}
GUILayout.Space(5);
if (mGUIMethod != null)
mGUIMethod.Invoke(this, null);
GUI.enabled = !mExecuting && mRunMethod!=null;
string label = (mExecuting) ? "Please wait..." : "Run (" + LOOPS + " times)";
if (GUILayout.Button(label))
{
mExecuting = true;
Timer.Clear();
mTestResults.Clear();
Invoke("runTest", .5f);
}
GUI.enabled = true;
if (Timer.Count > 0)
{
foreach (var s in mTestResults)
GUILayout.Label(s);
GUILayout.Label(string.Format("Average (ms): {0:0.0000}", Timer.AverageMS));
GUILayout.Label(string.Format("Minimum (ms): {0:0.0000}", Timer.MinimumMS));
GUILayout.Label(string.Format("Maximum (ms): {0:0.0000}", Timer.MaximumMS));
}
GUILayout.EndVertical();
}
/// <summary>
/// Gets the interpolated position for a certain TF
/// </summary>
/// <remarks>TF (Total Fragment) relates to the total length of the spline</remarks>
/// <param name="tf">TF value identifying position on spline (0..1)</param>
/// <param name="interpolation">the interpolation to use</param>
/// <returns>the interpolated position</returns>
public virtual UnityEngine.Vector3 Interpolate(float tf, CurvyInterpolation interpolation)
{
return(UnityEngine.Vector3.zero);
}
void OnGUI()
{
GUILayout.BeginArea(new Rect(10, 10, 1000, 600));
GUILayout.BeginHorizontal();
GUILayout.Label("Spline Type: ");
splineSelection = GUILayout.SelectionGrid(splineSelection, new string[] { "Linear", "Catmul-Rom", "TCB", "Bezier" }, 4);
GUILayout.EndHorizontal();
switch (splineSelection)
{
case 0: splineType = CurvyInterpolation.Linear; Prefix = "Linear"; break;
case 1: splineType = CurvyInterpolation.CatmulRom; Prefix = "Catmul"; break;
case 2: splineType = CurvyInterpolation.TCB; Prefix = "TCB"; break;
case 3: splineType = CurvyInterpolation.Bezier; Prefix = "Bezier"; break;
}
Prefix += " G=" + granularity;
GUILayout.BeginHorizontal();
GUILayout.Label("Spline Granularity: " + granularity);
int oldGran = granularity;
granularity = (int)GUILayout.HorizontalSlider(granularity, 1, 100);
GUILayout.EndHorizontal();
if (Splines.Count > 0 && (splineType != Splines[0].Interpolation || granularity != oldGran))
{
Clear();
}
includeDependent = GUILayout.Toggle(includeDependent, "Run tests that vary by different Spline Types");
includeIndependent = GUILayout.Toggle(includeIndependent, "Run tests that vary by different Granularity");
includeMisc = GUILayout.Toggle(includeMisc, "Run tests for misc. methods (conversions, etc.)");
includeGetNearestPoint = GUILayout.Toggle(includeGetNearestPoint, "Run CurvySpline.GetNearestPointTF() - takes some time");
GUILayout.BeginHorizontal();
if (GUILayout.Button("Clear Result"))
{
Results.Clear();
}
GUI.enabled = !running;
if (GUILayout.Button((running) ? "Please wait..." : "Run!"))
{
StartCoroutine(RunTests());
}
if (!Application.isWebPlayer)
{
GUI.enabled = Results.Count > 0;
if (GUILayout.Button("Save as CSV"))
{
SaveToCSV();
}
}
GUI.enabled = true;
GUILayout.EndHorizontal();
GUILayout.Label("* 'Create & Precalculate' as an exception is a single run only, the other values are calculated by averaging 50k runs (including time needed to get random values)!");
GUILayout.Label("* Times are in Milliseconds");
GUILayout.BeginHorizontal();
GUILayout.Label("Test", GUILayout.Width(400));
GUILayout.Label("2 Segments", GUILayout.Width(120));
GUILayout.Label("10 Segments", GUILayout.Width(120));
GUILayout.Label("50 Segments", GUILayout.Width(120));
GUILayout.Label("100 Segments", GUILayout.Width(120));
GUILayout.EndHorizontal();
scroll = GUILayout.BeginScrollView(scroll);
foreach (Result R in Results)
{
R.OnGUI();
}
GUILayout.EndScrollView();
GUILayout.EndArea();
}
/// <summary>
/// Gets the interpolated position for a certain TF
/// </summary>
/// <remarks>TF (Total Fragment) relates to the total length of the spline</remarks>
/// <param name="tf">TF value identifying position on spline (0..1)</param>
/// <param name="interpolation">the interpolation to use</param>
/// <returns>the interpolated position</returns>
public virtual Vector3 Interpolate(float tf, CurvyInterpolation interpolation) { return Vector3.zero; }
/// <summary>
/// Gets the interpolated position for a certain TF
/// </summary>
/// <remarks>TF (Total Fragment) relates to the total length of the spline</remarks>
/// <param name="tf">TF value identifying position on spline (0..1)</param>
/// <param name="interpolation">the interpolation to use</param>
/// <returns>the interpolated position</returns>
public virtual Vector3 Interpolate(float tf, CurvyInterpolation interpolation)
{
return(Vector3.zero);
}
void OnGUI()
{
GUILayout.BeginArea(new Rect(10, 10, 1000, 600));
GUILayout.BeginHorizontal();
GUILayout.Label("Spline Type: ");
splineSelection = GUILayout.SelectionGrid(splineSelection, new string[] { "Linear", "Catmul-Rom", "TCB" ,"Bezier"}, 4);
GUILayout.EndHorizontal();
switch (splineSelection) {
case 0: splineType = CurvyInterpolation.Linear; Prefix = "Linear"; break;
case 1: splineType = CurvyInterpolation.CatmulRom; Prefix = "Catmul"; break;
case 2: splineType = CurvyInterpolation.TCB; Prefix = "TCB"; break;
case 3: splineType = CurvyInterpolation.Bezier; Prefix = "Bezier"; break;
}
Prefix += " G=" + granularity;
GUILayout.BeginHorizontal();
GUILayout.Label("Spline Granularity: "+granularity);
int oldGran = granularity;
granularity=(int)GUILayout.HorizontalSlider(granularity, 1, 100);
GUILayout.EndHorizontal();
if (Splines.Count > 0 && (splineType != Splines[0].Interpolation || granularity!=oldGran))
Clear();
includeDependent = GUILayout.Toggle(includeDependent, "Run tests that vary by different Spline Types");
includeIndependent = GUILayout.Toggle(includeIndependent, "Run tests that vary by different Granularity");
includeMisc = GUILayout.Toggle(includeMisc, "Run tests for misc. methods (conversions, etc.)");
includeGetNearestPoint = GUILayout.Toggle(includeGetNearestPoint, "Run CurvySpline.GetNearestPointTF() - takes some time");
GUILayout.BeginHorizontal();
if (GUILayout.Button("Clear Result"))
Results.Clear();
GUI.enabled = !running;
if (GUILayout.Button((running) ? "Please wait..." : "Run!"))
StartCoroutine(RunTests());
if (!Application.isWebPlayer) {
GUI.enabled = Results.Count > 0;
if (GUILayout.Button("Save as CSV"))
SaveToCSV();
}
GUI.enabled = true;
GUILayout.EndHorizontal();
GUILayout.Label("* 'Create & Precalculate' as an exception is a single run only, the other values are calculated by averaging 50k runs (including time needed to get random values)!");
GUILayout.Label("* Times are in Milliseconds");
GUILayout.BeginHorizontal();
GUILayout.Label("Test", GUILayout.Width(400));
GUILayout.Label("2 Segments", GUILayout.Width(120));
GUILayout.Label("10 Segments", GUILayout.Width(120));
GUILayout.Label("50 Segments", GUILayout.Width(120));
GUILayout.Label("100 Segments", GUILayout.Width(120));
GUILayout.EndHorizontal();
scroll=GUILayout.BeginScrollView(scroll);
foreach (Result R in Results)
R.OnGUI();
GUILayout.EndScrollView();
GUILayout.EndArea();
}
