public static Gadgeteer.SocketInterfaces.AnalogInput Create(Socket socket, Socket.Pin pin, Module module)
{
socket.EnsureTypeIsSupported('A', module);
socket.ReservePin(pin, module);
Cpu.AnalogChannel channel = Cpu.AnalogChannel.ANALOG_NONE;
switch (pin)
{
case Socket.Pin.Three:
channel = socket.AnalogInput3;
break;
case Socket.Pin.Four:
channel = socket.AnalogInput4;
break;
case Socket.Pin.Five:
channel = socket.AnalogInput5;
break;
}
if ((channel == Cpu.AnalogChannel.ANALOG_NONE) && (socket.AnalogInputIndirector != null))
{
return(socket.AnalogInputIndirector(socket, pin, module));
}
return(new NativeAnalogInput(socket, pin, module, channel));
}
/// <summary>
/// Creates an instance of <see cref="AnalogInput" /> for the given socket and pin number.
/// </summary>
/// <remarks>This automatically checks that the socket supports Type A, and reserves the pin used.
/// An exception will be thrown if there is a problem with these checks.</remarks>
/// <param name="socket">The socket.</param>
/// <param name="pin">The analog input pin to use.</param>
/// <param name="module">The module using the socket, which can be null if unspecified.</param>
/// <returns>An instance of <see cref="AnalogInput" /> for the given socket and pin number.</returns>
public static AnalogInput Create(Socket socket, Socket.Pin pin, Module module)
{
socket.EnsureTypeIsSupported('A', module);
socket.ReservePin(pin, module);
Cpu.AnalogChannel channel = Cpu.AnalogChannel.ANALOG_NONE;
switch (pin)
{
case Socket.Pin.Three:
channel = socket.AnalogInput3;
break;
case Socket.Pin.Four:
channel = socket.AnalogInput4;
break;
case Socket.Pin.Five:
channel = socket.AnalogInput5;
break;
}
// native implementation is preferred to an indirected one
if (channel == Cpu.AnalogChannel.ANALOG_NONE && socket.AnalogInputIndirector != null)
{
return(socket.AnalogInputIndirector(socket, pin, module));
}
else
{
return(new NativeAnalogInput(socket, pin, module, channel));
}
}
/// <summary>
/// PinKit センサーボードのコンストラクター
/// </summary>
/// <param name="vr1">分圧抵抗値（サーミスター用）</param>
/// <param name="vr2">分圧抵抗値（端子台用）</param>
public SensorBoard(double vr1, double vr2)
{
_tempChannel = Pins.ANALOG_5; // サーミスターはAnalog 5番ピン
_termChannel = Pins.ANALOG_4; // 端子台はAnalog 4番ピン
_vr1 = vr1;
_vr2 = vr2;
}
/// <summary>
/// PinKit �Z���T�[�{�[�h�̃R���X�g���N�^�[
/// </summary>
/// <param name="vr1">������R�l�i�T�[�~�X�^�[�p�j</param>
/// <param name="vr2">������R�l�i�[�q��p�j</param>
public SensorBoard(double vr1, double vr2)
{
_tempChannel = Pins.ANALOG_5; // �T�[�~�X�^�[��Analog 5�ԃs��
_termChannel = Pins.ANALOG_4; // �[�q���Analog 4�ԃs��
_vr1 = vr1;
_vr2 = vr2;
}
public IRDistanceUpdater(Cpu.AnalogChannel channel, int sampleCount, int delay = 1000)
{
_irSensor = new IrDistanceSensor(channel, sampleCount);
_workItem = new WorkItem(BroadcastIrUpdate, false, true, true);
_delay = delay;
}
public TemperatureSensor(Cpu.AnalogChannel AnalogInputPin)
{
analogInput = new AnalogInput(AnalogInputPin);
gather_input = new Thread(GatherInput);
gather_input.Priority = ThreadPriority.Lowest;
gather_input.Start();
}
/// <summary>
/// Constructor
/// </summary>
/// <param name="channel">Analog channel used for reading LDR value</param>
/// <param name="adcResolution">ADC resolution for analog channel</param>
/// <param name="loadResistor">Load resistor in the LDR circuit (Ohm)</param>
/// <param name="aRef">Voltage reference for ADC</param>
public Ldr(Cpu.AnalogChannel channel, int adcResolution, int loadResistor, double aRef = DEFAULT_AREF)
{
this.input = new AnalogInput(channel);
this.adcResolution = adcResolution;
this.maxValue = (int)System.Math.Pow(2, adcResolution) - 1;
this.loadResistor = loadResistor;
this.aRef = aRef;
}
public AnalogInputPin(Cpu.AnalogChannel pin, double updateFrequency = DefaultUpdateFrequency)
: base(updateFrequency)
{
input = new AnalogInput(pin, -1);
var initialValue = input.Read();
Analog = AddPort("Analog", Units.Ratio, initialValue);
}
//--//
/// <summary>
/// Builds an instance of AnalogInput type for the specified channel
/// </summary>
/// <param name="channel">The channel for the AnalogInput</param>
/// <param name="scale">A multiplicative factor to apply to the raw reading from the sensor</param>
/// <param name="offset">A constant factor to add to the raw reading from the sensor</param>
/// <param name="precisionInBits">The desired bit precision for the A/D conversion. A value of -1 indicates default precision.</param>
public AnalogInput(Cpu.AnalogChannel channel, double scale, double offset, int precisionInBits)
{
m_channel = channel;
HardwareProvider hwProvider = HardwareProvider.HwProvider;
if(hwProvider == null) throw new InvalidOperationException();
m_pin = hwProvider.GetAnalogPinForChannel(channel);
m_scale = scale;
m_offset = offset;
int[] availablePrecisions = hwProvider.GetAvailablePrecisionInBitsForChannel(channel);
if(precisionInBits == -1)
{
if(availablePrecisions.Length == 0) throw new InvalidOperationException();
m_precision = availablePrecisions[0];
}
else
{
bool found = false;
foreach(int precision in availablePrecisions)
{
if(precisionInBits == precision)
{
m_precision = precision;
found = true;
break;
}
}
if(!found)
{
throw new ArgumentException();
}
}
bool fReserved = false;
try
{
lock(s_syncRoot)
{
fReserved = Port.ReservePin(m_pin, true);
Initialize(channel, m_precision);
}
}
catch
{
if (fReserved)
{
Port.ReservePin(m_pin, false);
}
throw;
}
}
public Axis(Cpu.Pin pin, Cpu.AnalogChannel analogChannel, double voltage)
{
_voltage = voltage;
var ax = new InterruptPort(pin, false, Port.ResistorMode.Disabled, Port.InterruptMode.InterruptEdgeBoth);
ax.Dispose();
_analogInput = new AnalogInput(analogChannel);
}
public NativeAnalogInput(Socket socket, Socket.Pin pin, Module module, Cpu.AnalogChannel channel)
{
if (channel == Cpu.AnalogChannel.ANALOG_NONE)
{
Socket.InvalidSocketException.ThrowIfOutOfRange(pin, Socket.Pin.Three, Socket.Pin.Five, "AnalogInput", module);
throw Socket.InvalidSocketException.FunctionalityException(socket, "AnalogInput");
}
this._channel = channel;
this._socket = socket;
}
public KeyPad(Cpu.AnalogChannel pin)
{
if (pin != Cpu.AnalogChannel.ANALOG_NONE) // (select key are optional)
{
_keyPort = new AnalogInput(pin)
{
Scale = 1000
};
}
}
/// <summary>
/// コンストラクター
/// </summary>
/// <param name="channel">サーミスターを接続するアナログチャンネル</param>
/// <param name="bc">サーミスターのB定数値</param>
/// <param name="r25">摂氏25度のゼロ負荷抵抗値</param>
/// <param name="vrd">分圧する抵抗値</param>
/// <param name="adc">A/D変換の分解能</param>
internal Temperature(Cpu.AnalogChannel channel, double bc, double r25, double vrd, double adc)
{
_temperatureInput = new AnalogInput(channel);
_bc = bc;
_r25 = r25;
_vrd = vrd;
_adc = adc;
_timer = new Timer(Measure_Timer, null, Timeout.Infinite, Timeout.Infinite);
}
public TdsMeter(Cpu.AnalogChannel AnalogPin)
{
analogBuffer = new double[SCOUNT];
analogBufferTemp = new double[SCOUNT];
tdsSensor = new AnalogInput(AnalogPin);
tdsValue = 0;
th1 = new Thread(new ThreadStart(Loop));
analogSampleTimepoint = DateTime.Now;
printTimepoint = DateTime.Now;
th1.Start();
}
public CustomMagUpdater(int dataCount, Cpu.AnalogChannel magPin)
{
_magPin = new AnalogInput(magPin);
_dataCount = dataCount;
Rebug.Print("Initializing high frequency custom magnetometer update cycle");
_dataArray = new byte[dataCount + MetaDataCount + TimeDataCount];
_workItem = new WorkItem(DumpMagData, ref _dataArray, loggable: true, persistent: true, pauseable: true);
_dataArray[0] = (byte)PacketType.StartByte;
_dataArray[1] = (byte)PacketType.FMagDump;
}
public LinearActuator(Cpu.AnalogChannel actuatorSensorPin, Cpu.Pin megaMotoEnablePin, Cpu.Pin megaMotoPWMAPin, Cpu.Pin megaMotoPWMBPin, Cpu.AnalogChannel megaMotoSensorPin)
{
_megaMotoEnable = new OutputPort(megaMotoEnablePin, false);
_megaMotoPWMA = new OutputPort(megaMotoPWMAPin, false);
_megaMotoPWMB = new OutputPort(megaMotoPWMBPin, false);
_linearActuatorSensor = new AnalogInput(actuatorSensorPin);
_linearActuatorSensor.Scale = 255;
_megaMotoSensor = new AnalogInput(megaMotoSensorPin);
_megaMotoSensor.Scale = 255;
RetractedPosition = 90; // default range
ExtendedPosition = 270;
}
public NativeAnalogInput(Socket socket, Socket.Pin pin, Module module, Cpu.AnalogChannel channel)
{
if (channel == Cpu.AnalogChannel.ANALOG_NONE)
{
Socket.InvalidSocketException.ThrowIfOutOfRange(pin, Socket.Pin.Three, Socket.Pin.Five, "AnalogInput", module);
// this is a mainboard error that should not happen (we already check for it in SocketInterfaces.RegisterSocket) but just in case...
throw Socket.InvalidSocketException.FunctionalityException(socket, "AnalogInput");
}
_channel = channel;
_socket = socket;
}
public NativeAnalogInput(Socket socket, Socket.Pin pin, Module module, Cpu.AnalogChannel channel)
{
if (channel == Cpu.AnalogChannel.ANALOG_NONE)
{
Socket.InvalidSocketException.ThrowIfOutOfRange(pin, Socket.Pin.Three, Socket.Pin.Five, "AnalogInput", module);
// this is a mainboard error that should not happen (we already check for it in SocketInterfaces.RegisterSocket) but just in case...
throw Socket.InvalidSocketException.FunctionalityException(socket, "AnalogInput");
}
_channel = channel;
_socket = socket;
}
public TempProbe(string name, Cpu.AnalogChannel pin)
{
Name = name;
_aInput = new AnalogInput(pin);
_accumulator = 0;
_accumulatedCount = 0;
TemperatureF = -1;
TemperatureR = -1;
TemperatureC = -1;
TemperatureFAvg = -1;
_steinhart = new double[4] {
2.3067434e-4, 2.3696596e-4, 1.2636414e-7, 1.0e+4
};
}
/// <summary>
/// Create a new sensor driver instance.
/// </summary>
/// <param name="windSpeedPin">The Netduino pin that is connected to sensor pin 5</param>
/// <param name="windDirectionPulse">The Netduino pin that is connected to sensor pin 2</param>
/// <param name="windDirectionSensor">The Netduino pin that is connected to sensor pin 3</param>
/// <param name="logger">The logger that should receive the NMEA output</param>
public WindSensor(
Cpu.Pin windSpeedPin,
Cpu.Pin windDirectionPulse,
Cpu.AnalogChannel windDirectionSensorPin,
WindSensorCallback windSensorCallback)
{
windDirectionSensor = new AnalogInput(windDirectionSensorPin);
pulsePort = new OutputPort(windDirectionPulse, false);
pulsePort.Write(true);
m_callback = windSensorCallback;
speedPort = new InterruptPort(windSpeedPin, true, Port.ResistorMode.PullUp, Port.InterruptMode.InterruptEdgeHigh);
speedPort.OnInterrupt += new NativeEventHandler(speedPort_OnInterrupt);
timer = new Timer(new TimerCallback(RateCallback), null, windDirectionInterval, windDirectionInterval);
}
public AnalogInputWrapper(
string name,
Cpu.AnalogChannel channel,
double scale,
double offset,
double normalizedTolerance = 0.05
)
: base(channel, scale, offset, 12)
{
this.Name = name;
//precalculate the absolute variation window
//around the reference (old) sampled value
this._absoluteToleranceDelta = scale * normalizedTolerance;
}
/// <summary>
/// Analog thumb joystick
/// </summary>
/// <param name="HorizontalPin">Analog pin for the horizontal bar</param>
/// <param name="VerticalPin">Analog pin for the vertical bar</param>
/// <param name="PushPin">Pin for the push button (optionally this class handles the push button)</param>
/// <param name="InvertHorizontal">When true, the horizontal value will be inverted</param>
/// <param name="InvertVertical">When true, the vertical value will be inverted</param>
public ThumbJoystick(Cpu.AnalogChannel HorizontalPin, Cpu.AnalogChannel VerticalPin, Cpu.Pin PushPin = Cpu.Pin.GPIO_NONE, bool InvertHorizontal = false, bool InvertVertical = false)
{
// Configures the analog inputs
this._Horizontal = new IntegratedADC(HorizontalPin);
this._Horizontal.RangeSet(-50, 50);
this._Vertical = new IntegratedADC(VerticalPin);
this._Vertical.RangeSet(-50, 50);
// Invertion will be copied
this.InvertHorizontal = InvertHorizontal;
this.InvertVertical = InvertVertical;
// If needed, configures the digital input
if (PushPin != Cpu.Pin.GPIO_NONE)
{
this._Push = new InputPort(PushPin, false, Port.ResistorMode.PullUp);
}
}
public PhMeter(Cpu.AnalogChannel AnalogPin)
{
try
{
phSensor = new AnalogInput(AnalogPin);
buf = new double[10];
PhValue = 0;
th1 = new Thread(new ThreadStart(Loop));
th1.Start();
}
catch (Exception ex)
{
Debug.Print("Ph Sensor Error" + ex.Message);
}
}
public LightTracker(Cpu.PWMChannel panPin, Cpu.AnalogChannel topLeftPhotocell, Cpu.AnalogChannel topRightPhotocell)
{
_panServo = new ContServo(panPin);
_panServo.reset_ticks();
//_tiltServo = new Servo(tiltPin, 150) { Degree = 150 };
//_lastY = _tiltServo.Degree;
photoCellL = new AnalogInput(topLeftPhotocell);
photoCellR = new AnalogInput(topRightPhotocell);
//photoCellBL = new AnalogInput(bottomLeftPhotocell);
//photoCellBR = new AnalogInput(bottomRightPhotocell);
_trackAction = new WorkItem(SearchForLight, true);
}
// Note: A constructor summary is auto-generated by the doc builder.
/// <summary></summary>
/// <remarks>This automatically checks that the socket supports Type A, and reserves the pin used.
/// An exception will be thrown if there is a problem with these checks.</remarks>
/// <param name="socket">The socket.</param>
/// <param name="pin">The analog input pin to use.</param>
/// <param name="module">The module using the socket, which can be null if unspecified.</param>
public AnalogInput(Socket socket, Socket.Pin pin, Module module)
{
this.socket = socket;
socket.EnsureTypeIsSupported('A', module);
switch (pin)
{
case Socket.Pin.Three:
channel = socket.AnalogInput3;
break;
case Socket.Pin.Four:
channel = socket.AnalogInput4;
break;
case Socket.Pin.Five:
channel = socket.AnalogInput5;
break;
default:
if (module != null)
{
throw new Socket.InvalidSocketException("Module " + module + " cannot use Analog Input interface on pin " + pin + " - pin must be in range 3 to 5.");
}
else
{
throw new Socket.InvalidSocketException("Cannot use Analog Input interface on pin " + pin + " - pin must be in range 3 to 5.");
}
}
if (channel == Cpu.AnalogChannel.ANALOG_NONE)
{
// this is a mainboard error that should not happen (we already check for it in SocketInterfaces.RegisterSocket) but just in case...
throw new Socket.InvalidSocketException("Socket " + socket + " has an error with its Analog Input functionality. Please try a different socket.");
}
socket.ReservePin(pin, module);
}
/// <summary>
/// New instance of the AnalogTemperatureSensor class.
/// </summary>
/// <param name="analogPin">Analog pin the temperature sensor is connected to.</param>
/// <param name="sensor">Type of sensor attached to the analog port.</param>
/// <param name="sampleReading">Sample sensor reading in degrees centigrade (Optional)</param>
/// <param name="millivoltsAtSampleReading">Number of millivolts representing the sample reading (Optional)</param>
/// <param name="millivoltsPerDegreeCentigrade">Number of millivolts pre degree centigrade (Optional)</param>
public AnalogTemperatureSensor(Cpu.AnalogChannel analogPin, SensorType sensor, int sampleReading = 25,
int millivoltsAtSampleReading = 250, int millivoltsPerDegreeCentigrade = 10)
{
AnalogPort = new AnalogInput(analogPin);
switch (sensor)
{
case SensorType.TMP35:
case SensorType.LM35:
case SensorType.LM45:
_yIntercept = 0;
_millivoltsPerDegreeCentigrade = 10;
break;
case SensorType.LM50:
case SensorType.TMP36:
_yIntercept = 500;
_millivoltsPerDegreeCentigrade = 10;
break;
case SensorType.TMP37:
_yIntercept = 0;
_millivoltsPerDegreeCentigrade = 20;
break;
case SensorType.Custom:
_yIntercept = millivoltsAtSampleReading - (sampleReading * millivoltsAtSampleReading);
_millivoltsPerDegreeCentigrade = millivoltsPerDegreeCentigrade;
break;
default:
throw new ArgumentException("Unknown sensor type", "sensor");
#pragma warning disable 0162
break;
#pragma warning restore 0162
}
}
/// <summary>
/// TMP 36GZ Temperature Sensor
/// </summary>
/// <param name="AnalogPort">The port the sensor is connected to</param>
public Tmp36(Cpu.AnalogChannel AnalogPort)
{
this._AnalogPort = new IntegratedADC(AnalogPort);
this._AnalogPort.RangeSet(0, 1024);
}
public SensorSound(Cpu.AnalogChannel pin, int SampleRateMilliseconds, string name)
: base(SensorType.Sound, ValuesPerSample.One, SampleRateMilliseconds, name)
{
analogPin = new AnalogInput(pin, -1);
StartMeasuring();
}
/// <summary>
/// コンストラクター
/// </summary>
/// <param name="channel">アナログチャンネル</param>
public SensorTerminal(Cpu.AnalogChannel channel)
{
_sensor = new AnalogInput(channel);
_timer = new Timer(Measure_Timer, null, Timeout.Infinite, Timeout.Infinite);
}
public virtual int[] GetAvailablePrecisionInBitsForChannel(Cpu.AnalogChannel channel)
{
//Return nothing as no analog
return(null); // new int[0]; //NativeGetAvailablePrecisionInBitsForChannel(channel);
}
public virtual Cpu.Pin GetAnalogPinForChannel(Cpu.AnalogChannel channel)
{
return(Cpu.Pin.GPIO_NONE);
}
public LightSensor(Cpu.AnalogChannel analogPin)
{
analogInput = new AnalogInput(analogPin);
}
public SensorMoisture(Cpu.AnalogChannel pin, int SampleRateMilliseconds, string name)
: base(pin, SampleRateMilliseconds, name, "moisture", "p")
{
}
public AnalogElement(BaseShield.AnalogPorts port)
{
var channels = BaseShield.GetAnalogChannels(port);
Channel1 = channels[0];
Channel2 = channels[1];
}