public override bool Execute(IContext context, IContext hostContext)
{
#region Export Dossier Technique
{
if (CommmandeExists(context, "CLIPPER_EXPORT_DT_DLL") == false)
{
{
ICommandTypeFactory commandTypeFactory = new CommandTypeFactory(context, 1, null, false);
commandTypeFactory.Key = "CLIPPER_EXPORT_DT_DLL";
commandTypeFactory.Name = "Clipper : Export Dossier Technique";
commandTypeFactory.PlugInFileName = @"AF_Clipper_Dll.dll";
commandTypeFactory.PlugInNameSpace = "AF_Clipper_Dll";
commandTypeFactory.PlugInClassName = "Clipper_8_Export_DT_Processor";
commandTypeFactory.Shortcut = Shortcut.None;
commandTypeFactory.WorkOnEntityTypeKey = "_REFERENCE";
commandTypeFactory.LargeImage = true;
if (File.Exists(@"C:\AlmaCAM\Bin\Icones\Clipper\" + commandTypeFactory.Key + ".png"))
{
commandTypeFactory.ImageFile = @"C:\AlmaCAM\Bin\Icones\Clipper\" + commandTypeFactory.Key + ".png";
}
else
{
commandTypeFactory.ImageFile = "";
}
if (!commandTypeFactory.UpdateModel())
{
foreach (ModelSettingError error in commandTypeFactory.ErrorList)
{
hostContext.TraceLogger.TraceError(error.Message, true);
}
return(false);
}
}
}
}
#endregion
#region Import OF
{
if (CommmandeExists(context, "IMPORT_OF") == false)
{
{
ICommandTypeFactory commandTypeFactory = new CommandTypeFactory(context, 1, null, false);
commandTypeFactory.Key = "IMPORT_OF";
commandTypeFactory.Name = "Clipper : Import OF";
commandTypeFactory.PlugInFileName = @"AF_Clipper_Dll.dll";
commandTypeFactory.PlugInNameSpace = "AF_Clipper_Dll";
commandTypeFactory.PlugInClassName = "Clipper_8_Import_OF_Processor";
commandTypeFactory.Shortcut = Shortcut.None;
commandTypeFactory.WorkOnEntityTypeKey = "_TO_PRODUCE_REFERENCE";
commandTypeFactory.LargeImage = true;
if (File.Exists(@"C:\AlmaCAM\Bin\Icones\Clipper\" + commandTypeFactory.Key + ".png"))
{
commandTypeFactory.ImageFile = @"C:\AlmaCAM\Bin\Icones\Clipper\" + commandTypeFactory.Key + ".png";
}
else
{
commandTypeFactory.ImageFile = "";
}
if (!commandTypeFactory.UpdateModel())
{
foreach (ModelSettingError error in commandTypeFactory.ErrorList)
{
hostContext.TraceLogger.TraceError(error.Message, true);
}
return(false);
}
}
}
}
#endregion
#region Import Stock
{
if (CommmandeExists(context, "IMPORT_STOCK") == false)
{
{
ICommandTypeFactory commandTypeFactory = new CommandTypeFactory(context, 1, null, false);
commandTypeFactory.Key = "IMPORT_STOCK";
commandTypeFactory.Name = "Clipper : Import Stock";
commandTypeFactory.PlugInFileName = @"AF_Clipper_Dll.dll";
commandTypeFactory.PlugInNameSpace = "AF_Clipper_Dll";
commandTypeFactory.PlugInClassName = "Clipper_8_Import_Stock_Processor";
commandTypeFactory.Shortcut = Shortcut.None;
commandTypeFactory.WorkOnEntityTypeKey = "_STOCK";
commandTypeFactory.LargeImage = true;
if (File.Exists(@"C:\AlmaCAM\Bin\Icones\Clipper\" + commandTypeFactory.Key + ".png"))
{
commandTypeFactory.ImageFile = @"C:\AlmaCAM\Bin\Icones\Clipper\" + commandTypeFactory.Key + ".png";
}
else
{
commandTypeFactory.ImageFile = "";
}
if (!commandTypeFactory.UpdateModel())
{
foreach (ModelSettingError error in commandTypeFactory.ErrorList)
{
hostContext.TraceLogger.TraceError(error.Message, true);
}
return(false);
}
}
}
}
#endregion
#region ImporterMatiere
{
if (CommmandeExists(context, "IMPORT_CLIPPER_MATERIAL") == false)
{
{
ICommandTypeFactory commandTypeFactory = new CommandTypeFactory(context, 1, null, false);
commandTypeFactory.Key = "IMPORT_CLIPPER_MATERIAL";
commandTypeFactory.Name = "Clipper : Import Matiere";
commandTypeFactory.PlugInFileName = @"AF_Import_ODBC_Clipper_AlmaCam.dll";
commandTypeFactory.PlugInNameSpace = "AF_Import_ODBC_Clipper_AlmaCam";
commandTypeFactory.PlugInClassName = "Clipper8_ImportMatiere_Processor";
commandTypeFactory.Shortcut = Shortcut.None;
commandTypeFactory.WorkOnEntityTypeKey = "_QUALITY";
commandTypeFactory.LargeImage = true;
if (File.Exists(@"C:\AlmaCAM\Bin\Icones\Clipper\" + commandTypeFactory.Key + ".png"))
{
commandTypeFactory.ImageFile = @"C:\AlmaCAM\Bin\Icones\Clipper\" + commandTypeFactory.Key + ".png";
}
else
{
commandTypeFactory.ImageFile = "";
}
if (!commandTypeFactory.UpdateModel())
{
foreach (ModelSettingError error in commandTypeFactory.ErrorList)
{
hostContext.TraceLogger.TraceError(error.Message, true);
}
return(false);
}
}
}
}
#endregion
#region Import Fournitures
{
if (CommmandeExists(context, "IMPORT_FOURNITURES") == false)
{
{
ICommandTypeFactory commandTypeFactory = new CommandTypeFactory(context, 1, null, false);
commandTypeFactory.Key = "IMPORT_FOURNITURES";
commandTypeFactory.Name = "Clipper : Importer Fournitures";
commandTypeFactory.PlugInFileName = @"AF_Import_ODBC_Clipper_AlmaCam.dll";
commandTypeFactory.PlugInNameSpace = "AF_Import_ODBC_Clipper_AlmaCam";
commandTypeFactory.PlugInClassName = "Clipper_Import_Fournitures_Divers_Processor";
commandTypeFactory.Shortcut = Shortcut.None;
commandTypeFactory.WorkOnEntityTypeKey = "_SIMPLE_SUPPLY";
commandTypeFactory.LargeImage = true;
if (File.Exists(@"C:\AlmaCAM\Bin\Icones\Clipper\" + commandTypeFactory.Key + ".png"))
{
commandTypeFactory.ImageFile = @"C:\AlmaCAM\Bin\Icones\Clipper\" + commandTypeFactory.Key + ".png";
}
else
{
commandTypeFactory.ImageFile = "";
}
if (!commandTypeFactory.UpdateModel())
{
foreach (ModelSettingError error in commandTypeFactory.ErrorList)
{
hostContext.TraceLogger.TraceError(error.Message, true);
}
return(false);
}
}
}
}
#endregion
#region CLIP Configuration
{
if (CommmandeExists(context, "CLIP_CONFIGURATION") == false)
{
ICommandTypeFactory commandTypeFactory = new CommandTypeFactory(context, 1, null, true);
commandTypeFactory.Key = "CLIP_CONFIGURATION";
commandTypeFactory.Name = "Clipper : CLIP Configuration";
commandTypeFactory.PlugInFileName = @"AF_Clipper_Dll.dll";
commandTypeFactory.PlugInNameSpace = "AF_Clipper_Dll";
commandTypeFactory.PlugInClassName = "ClipperIE_Global";
commandTypeFactory.Shortcut = Shortcut.None;
commandTypeFactory.LargeImage = true;
if (File.Exists(@"C:\AlmaCAM\Bin\Icones\Clipper\" + commandTypeFactory.Key + ".png"))
{
commandTypeFactory.ImageFile = @"C:\AlmaCAM\Bin\Icones\Clipper\" + commandTypeFactory.Key + ".png";
}
else
{
commandTypeFactory.ImageFile = "";
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "IMPORT_CDA";
parameterDescription.Name = "Chemin complet vers le cahier d affaire ";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"C:\AlmaCAM\Bin\AlmaCam_Clipper\_Clipper\Import_OF\CAHIER_AFFAIRE.csv";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "IMPORT_DM";
parameterDescription.Name = "Chemin complet vers le stock";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"C:\AlmaCAM\Bin\AlmaCam_Clipper\_Clipper\Import_Stock\DISPO_MAT.csv";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "EXPORT_Rp";
parameterDescription.Name = "Dossier d export des retours GP";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"C:\AlmaCAM\Bin\AlmaCam_Clipper\_Clipper\Export_GPAO";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "EXPORT_Dt";
parameterDescription.Name = "Dossier d export des clotures";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"C:\AlmaCAM\Bin\AlmaCam_Clipper\_Clipper\Export_DT";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "IMPORT_AUTO";
parameterDescription.Name = "Activer l import Auto";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.Boolean;
parameterDescription.DefaultValue = true;
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "EMF_DIRECTORY";
parameterDescription.Name = "Emf Directory";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"C:\AlmaCAM\Bin\AlmaCam_Clipper\_Clipper\EMF";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "MODEL_CA";
parameterDescription.Name = "Model Cahier Affaire";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"0#_NAME#string;1#AFFAIRE#string;2#THICKNESS#string;3#_MATERIAL#string;4#CENTREFRAIS#string;5#TECHNOLOGIE#string;6#FAMILY#string;7#IDLNROUT#string;8#CENTREFRAISSUIV#string;9#_FIRM#string;10#_QUANTITY#integer;11#QUANTITY#double;12#ECOQTY#string;13#STARTDATE#date;14#ENDDATE#date;15#PLAN#string;16#FORMATCLIP#string;17#IDMAT#string;18#IDLNBOM#string;19#NUMMAG#string;20#FILENAME#string;21#_DESCRIPTION#string;22#_CLIENT_ORDER_NUMBER#string;23#DELAI_INT#date;24#EN_RANG#string;25#EN_PERE_PIECE#string;26#ID_PIECE_CFAO#string";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "MODEL_DM";
parameterDescription.Name = "Model Fichier de Stock";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
//parameterDescription.DefaultValue = @"0#_NAME#string;1#_MATERIAL#string;2#_LENGTH#double;3#_WIDTH#double;4#THICKNESS#double;5#QTY_TOT#integer;6#_QUANTITY#integer;7#GISEMENT#string;8#NUMMAG#string;9#NUMMATLOT#string;10#NUMCERTIF#string;11#NUMLOT#string;12#NUMCOUL#string;13#IDCLIP#string;14#FILENAME#string";
//modification sp5
//parameterDescription.DefaultValue = @"0#_NAME#string;1#_MATERIAL#string;2#_LENGTH#double;3#_WIDTH#double;4#THICKNESS#double;5#QTY_TOT#integer;6#_REST_QUANTITY#integer;7#GISEMENT#string;8#NUMMAG#string;9#NUMMATLOT#string;10#NUMCERTIF#string;11#NUMLOT#string;12#NUMCOUL#string;13#IDCLIP#string;14#FILENAME#string;15#NAF_LOTIE#string";
//naf jamais envoyé si vide--> on vire le champs
//parameterDescription.DefaultValue = @"0#_NAME#string;1#_MATERIAL#string;2#_LENGTH#double;3#_WIDTH#double;4#THICKNESS#double;5#QTY_TOT#integer;6#_REST_QUANTITY#integer;7#GISEMENT#string;8#NUMMAG#string;9#NUMMATLOT#string;10#NUMCERTIF#string;11#NUMLOT#string;12#NUMCOUL#string;13#IDCLIP#string;14#FILENAME#string";
parameterDescription.DefaultValue = @"0#_NAME#string;1#_MATERIAL#string;2#_LENGTH#double;3#_WIDTH#double;4#THICKNESS#double;5#QTY_TOT#integer;6#_REST_QUANTITY#integer;7#GISEMENT#string;8#NUMMAG#string;9#NUMMATLOT#string;10#NUMCERTIF#string;11#NUMLOT#string;12#_HEAT_NUMBER#string;13#IDCLIP#string;14#FILENAME#string";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "MODEL_PATH";
parameterDescription.Name = "Model Chemin d export";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"0#TECHNOLOGIE#string;1#ImportCda#string;0#ImportDM#string;2#ExportRp#string;3#ExportDT#string;4#Centredefrais#string;5#Destination_Path#string;6#Source_Path#string";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "APPLICATION1";
parameterDescription.Name = "Path to AlmaCamUser1";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"C:\AlmaCAM\Bin\AlmaCamUser1.exe";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "CLIPPER_MACHINE_CF";
parameterDescription.Name = "centre de frais machine clipper";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"CLIP";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "STRING_FORMAT_DOUBLE";
parameterDescription.Name = "format double";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"{0:0.00###}";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "ALMACAM_EDITOR_NAME";
parameterDescription.Name = "Nom de l editeur AlmaCam";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"Wpm.Implement.Editor.exe";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "SHEET_REQUIREMENT";
parameterDescription.Name = "Dossier d'export des besoins matieres";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"C:\AlmaCAM\Bin\AlmaCam_Clipper\_Clipper\Export_Sheet_requirements";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "EXPLODE_MULTIPLICITY";
parameterDescription.Name = "Explosion de fichiers de retours sur mutliplicite";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.Boolean;
parameterDescription.DefaultValue = true;
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "ACTIVATE_OMISSION";
parameterDescription.Name = "Activation des omissions";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.Boolean;
parameterDescription.DefaultValue = true;
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "AF_ACTIVATE_SHEET_ON_SENDTOWSHOP";
parameterDescription.Name = "Validation des chutes à l envoie a la coupe";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.Boolean;
parameterDescription.DefaultValue = false;
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "AF_ACTIVATE_QTY_ON_SENDTOWSHOP";
parameterDescription.Name = "Qté par defaut des chutes AF des l'envoie à la coupe";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.Int;
parameterDescription.DefaultValue = 0;
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "VERBOSE_LOG";
parameterDescription.Name = "Log verbeux";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.Boolean;
parameterDescription.DefaultValue = true;
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "AF_MULTIDIM_MODE";
parameterDescription.Name = "Favoriser le Multidim";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.Boolean;
parameterDescription.DefaultValue = true;
commandTypeFactory.ParameterList.Add(parameterDescription);
}
if (!commandTypeFactory.UpdateModel())
{
foreach (ModelSettingError error in commandTypeFactory.ErrorList)
{
hostContext.TraceLogger.TraceError(error.Message, true);
}
return(false);
}
}
}
#endregion
#region Clipper : Importer Tubes
{
if (CommmandeExists(context, "AF_IMPORT_TUBES") == false)
{
ICommandTypeFactory commandTypeFactory = new CommandTypeFactory(context, 1, null, false);
commandTypeFactory.Key = "AF_IMPORT_TUBES";
commandTypeFactory.Name = "Clipper : Importer Tubes";
commandTypeFactory.PlugInFileName = @"AF_Import_ODBC_Clipper_AlmaCam.dll";
commandTypeFactory.PlugInNameSpace = "AF_Import_ODBC_Clipper_AlmaCam";
commandTypeFactory.PlugInClassName = "Clipper8_ImportTubes_Processor";
commandTypeFactory.Shortcut = Shortcut.None;
commandTypeFactory.WorkOnEntityTypeKey = "_BARTUBE";
commandTypeFactory.LargeImage = true;
if (File.Exists(@"C:\AlmaCAM\Bin\Icones\Clipper\" + commandTypeFactory.Key + ".png"))
{
commandTypeFactory.ImageFile = @"C:\AlmaCAM\Bin\Icones\Clipper\" + commandTypeFactory.Key + ".png";
}
else
{
commandTypeFactory.ImageFile = "";
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "AF_ROUND";
parameterDescription.Name = "Importer Ronds";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.Boolean;
parameterDescription.DefaultValue = true;
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "AF_ROUND_TUBE";
parameterDescription.Name = "Importer Tubes";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.Boolean;
parameterDescription.DefaultValue = true;
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "AF_RECTANGLE";
parameterDescription.Name = "Importer Rectangles";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.Boolean;
parameterDescription.DefaultValue = true;
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "AF_FLAT";
parameterDescription.Name = "Importer Plats";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.Boolean;
parameterDescription.DefaultValue = true;
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "AF_FLAT_THREESOLD";
parameterDescription.Name = "Seuil de longueur pour reconnaitre les plats";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.Double;
parameterDescription.DefaultValue = 300;
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "AF_CHECK_NEW_QUALITY";
parameterDescription.Name = "Importer les matieres avant d'importer les tubes";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.Boolean;
parameterDescription.DefaultValue = true;
commandTypeFactory.ParameterList.Add(parameterDescription);
}
if (!commandTypeFactory.UpdateModel())
{
foreach (ModelSettingError error in commandTypeFactory.ErrorList)
{
hostContext.TraceLogger.TraceError(error.Message, true);
}
return(false);
}
}
}
#endregion
#region export gp
{
if (CommmandeExists(context, "AF_EXPORT_NESTING") == false)
{
{
ICommandTypeFactory commandTypeFactory = new CommandTypeFactory(context, 1, null, false);
commandTypeFactory.Key = "AF_EXPORT_NESTING";
commandTypeFactory.Name = "Clipper : Export des placements vers clipper";
commandTypeFactory.PlugInFileName = @"AF_Clipper_Dll.dll";
commandTypeFactory.PlugInNameSpace = "AF_Clipper_Dll";
commandTypeFactory.PlugInClassName = "Clipper_8_Export_GP_Processor";
commandTypeFactory.Shortcut = Shortcut.None;
commandTypeFactory.WorkOnEntityTypeKey = "_TO_CUT_NESTING";
commandTypeFactory.LargeImage = true;
if (File.Exists(@"C:\AlmaCAM\Bin\Icones\Clipper\" + commandTypeFactory.Key + ".png"))
{
commandTypeFactory.ImageFile = @"C:\AlmaCAM\Bin\Icones\Clipper\" + commandTypeFactory.Key + ".png";
}
else
{
commandTypeFactory.ImageFile = "";
}
if (!commandTypeFactory.UpdateModel())
{
foreach (ModelSettingError error in commandTypeFactory.ErrorList)
{
hostContext.TraceLogger.TraceError(error.Message, true);
}
return(false);
}
}
}
}
#endregion
return(true);
}
public override bool Execute(IContext context, IContext hostContext)
{
#region CLIP Configuration
{
ICommandTypeFactory commandTypeFactory = new CommandTypeFactory(context, 1, null, true);
commandTypeFactory.Key = "CLIP_CONFIGURATION";
commandTypeFactory.Name = "CLIP Configuration";
commandTypeFactory.PlugInFileName = @"AF_Clipper_Dll.dll";
commandTypeFactory.PlugInNameSpace = "AF_Clipper_Dll";
commandTypeFactory.PlugInClassName = "ClipperIE_Global";
commandTypeFactory.Shortcut = Shortcut.None;
commandTypeFactory.LargeImage = true;
commandTypeFactory.ImageFile = "";
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "IMPORT_CDA";
parameterDescription.Name = "Chemin complet vers le cahier d'affaire ( CAHIER_AFFAIRE.csv )";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"C:\AlmaCAM\Bin\AlmaCam_Clipper\_Clipper\CAHIER_AFFAIRE.csv";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "IMPORT_DM";
parameterDescription.Name = "Chemin complet vers le stock";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"C:\AlmaCAM\Bin\AlmaCam_Clipper\_Clipper\Import_Stock\DISPO_MAT.csv";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "EXPORT_Rp";
parameterDescription.Name = "Dossier d'export des retours GP";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"C:\AlmaCAM\Bin\AlmaCam_Clipper\_Clipper\Export_GPAO";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "EXPORT_Dt";
parameterDescription.Name = "Dossier d'export des clotures";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"C:\AlmaCAM\Bin\AlmaCam_Clipper\_Clipper\Export_DT";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "IMPORT_AUTO";
parameterDescription.Name = "Activer l' import Auto";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.Boolean;
parameterDescription.DefaultValue = true;
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "EMF_DIRECTORY";
parameterDescription.Name = "Emf Directory";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"C:\AlmaCAM\Bin\AlmaCam_Clipper\_Clipper\EMF";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "MODEL_CA";
parameterDescription.Name = "Model Cahier Affaire";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"0#_NAME#string;1#AFFAIRE#string;2#THICKNESS#string;3#MATERIAL_CLIPPER#string;4#CENTREFRAIS#string;5#TECHNOLOGIE#string;6#FAMILY#string;7#IDLNROUT#string;8#CENTREFRAISSUIV#string;9#CUSTOMER#string;10#_QUANTITY#integer;11#QUANTITY#double;12#ECOQTY#string;13#STARTDATE#date;14#ENDDATE#date;15#PLAN#string;16#FORMATCLIP#string;17#IDMAT#string;18#IDLNBOM#string;19#NUMMAG#string;20#FILENAME#string;21#_DESCRIPTION#string;22#AF_CDE#string;23#DELAI_INT#date;24#EN_RANG#string;25#EN_PERE_PIECE#string";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "MODEL_DM";
parameterDescription.Name = "Model Fichier de Stock";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"0#_NAME#string;1#_MATERIAL#string;2#_LENGTH#double;3#_WIDTH#double;4#THICKNESS#double;5#QTY_TOT#integer;6#_QUANTITY#integer;7#GISEMENT#string;8#NUMMAG#string;9#NUMMATLOT#string;10#NUMCERTIF#string;11#NUMLOT#string;12#NUMCOUL#string;13#IDCLIP#string;14#FILENAME#string";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "MODEL_PATH";
parameterDescription.Name = "Model Chemin d'export";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"0#TECHNOLOGIE#string;1#ImportCda#string;0#ImportDM#string;2#ExportRp#string;3#ExportDT#string;4#Centredefrais#string;5#Destination_Path#string;6#Source_Path#string";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "APPLICATION1";
parameterDescription.Name = "Path to AlmaCamUser1";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"C:\AlmaCAM\Bin\AlmaCamUser1.exe";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "VERBOSE_LOG";
parameterDescription.Name = "Log verbeux";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.Boolean;
parameterDescription.DefaultValue = false;
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "CLIPPER_MACHINE_CF";
parameterDescription.Name = "centre de frais machine clipper";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"CLIP";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "STRING_FORMAT_DOUBLE";
parameterDescription.Name = "format double";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"{0:0.00###}";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "ALMACAM_EDITOR_NAME";
parameterDescription.Name = "Nom de l'editeur AlmaCam";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"Wpm.Implement.Editor.exe";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "SHEET_REQUIREMENT";
parameterDescription.Name = "Dossier d'export des besoins matieres";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"C:\AlmaCAM\Bin\AlmaCam_Clipper\_Clipper\Export_Sheet_requirements";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "EXPLODE_MULTIPLICITY";
parameterDescription.Name = "Explosion de fichiers de retours sur mutliplicite";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.Boolean;
parameterDescription.DefaultValue = false;
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "ACTIVATE_OMISSION";
parameterDescription.Name = "Activation des omissions";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.Boolean;
parameterDescription.DefaultValue = false;
commandTypeFactory.ParameterList.Add(parameterDescription);
}
if (!commandTypeFactory.UpdateModel())
{
foreach (ModelSettingError error in commandTypeFactory.ErrorList)
{
hostContext.TraceLogger.TraceError(error.Message, true);
}
return(false);
}
}
#endregion
#region Export Dossier Technique
{
ICommandTypeFactory commandTypeFactory = new CommandTypeFactory(context, 1, null, false);
commandTypeFactory.Key = "CLIPPER_EXPORT_DT_DLL";
commandTypeFactory.Name = "Export Dossier Technique";
commandTypeFactory.PlugInFileName = @"AF_Clipper_Dll.dll";
commandTypeFactory.PlugInNameSpace = "AF_Clipper_Dll";
commandTypeFactory.PlugInClassName = "Clipper_Export_DT";
commandTypeFactory.Shortcut = Shortcut.None;
commandTypeFactory.WorkOnEntityTypeKey = "_REFERENCE";
commandTypeFactory.LargeImage = true;
if (!commandTypeFactory.UpdateModel())
{
foreach (ModelSettingError error in commandTypeFactory.ErrorList)
{
hostContext.TraceLogger.TraceError(error.Message, true);
}
return(false);
}
}
#endregion
#region Import Fournitures
{
ICommandTypeFactory commandTypeFactory = new CommandTypeFactory(context, 1, null, false);
commandTypeFactory.Key = "IMPORT_CLIPPER_FOURNITURES";
commandTypeFactory.Name = "Import Fournitures";
commandTypeFactory.PlugInFileName = @"AF_Import_ODBC_Clipper_AlmaCam.dll";
commandTypeFactory.PlugInNameSpace = "AF_Import_ODBC_Clipper_AlmaCam";
commandTypeFactory.PlugInClassName = "Clipper_Import_Fournitures_Divers_Processor";
commandTypeFactory.Shortcut = Shortcut.None;
commandTypeFactory.WorkOnEntityTypeKey = "_SIMPLE_SUPPLY";
commandTypeFactory.LargeImage = true;
if (!commandTypeFactory.UpdateModel())
{
foreach (ModelSettingError error in commandTypeFactory.ErrorList)
{
hostContext.TraceLogger.TraceError(error.Message, true);
}
return(false);
}
}
#endregion
#region Import OF
{
ICommandTypeFactory commandTypeFactory = new CommandTypeFactory(context, 1, null, false);
commandTypeFactory.Key = "IMPORT_OF";
commandTypeFactory.Name = "Import OF";
commandTypeFactory.PlugInFileName = @"AF_Clipper_Dll.dll";
commandTypeFactory.PlugInNameSpace = "AF_Clipper_Dll";
commandTypeFactory.PlugInClassName = "Clipper_8_Import_OF_Processor";
commandTypeFactory.Shortcut = Shortcut.None;
commandTypeFactory.WorkOnEntityTypeKey = "_TO_PRODUCE_REFERENCE";
commandTypeFactory.LargeImage = true;
commandTypeFactory.ImageFile = "";
if (!commandTypeFactory.UpdateModel())
{
foreach (ModelSettingError error in commandTypeFactory.ErrorList)
{
hostContext.TraceLogger.TraceError(error.Message, true);
}
return(false);
}
}
#endregion
#region Import Stock
{
ICommandTypeFactory commandTypeFactory = new CommandTypeFactory(context, 1, null, false);
commandTypeFactory.Key = "IMPORT_STOCK";
commandTypeFactory.Name = "Import Stock";
commandTypeFactory.PlugInFileName = @"AF_Clipper_Dll.dll";
commandTypeFactory.PlugInNameSpace = "AF_Clipper_Dll";
commandTypeFactory.PlugInClassName = "Clipper_8_Import_Stock_Processor";
commandTypeFactory.Shortcut = Shortcut.None;
commandTypeFactory.WorkOnEntityTypeKey = "_STOCK";
commandTypeFactory.LargeImage = true;
commandTypeFactory.ImageFile = "";
if (!commandTypeFactory.UpdateModel())
{
foreach (ModelSettingError error in commandTypeFactory.ErrorList)
{
hostContext.TraceLogger.TraceError(error.Message, true);
}
return(false);
}
}
#endregion
#region ImporterMatiere
{
ICommandTypeFactory commandTypeFactory = new CommandTypeFactory(context, 1, null, false);
commandTypeFactory.Key = "IMPORT_CLIPPER_MATERIAL";
commandTypeFactory.Name = "ImporterMatiere";
commandTypeFactory.PlugInFileName = @"AF_Import_ODBC_Clipper_AlmaCam.dll";
commandTypeFactory.PlugInNameSpace = "AF_Import_ODBC_Clipper_AlmaCam";
commandTypeFactory.PlugInClassName = "Clipper8_ImportMatiere_Processor";
commandTypeFactory.Shortcut = Shortcut.None;
commandTypeFactory.WorkOnEntityTypeKey = "_QUALITY";
commandTypeFactory.LargeImage = true;
commandTypeFactory.ImageFile = "";
if (!commandTypeFactory.UpdateModel())
{
foreach (ModelSettingError error in commandTypeFactory.ErrorList)
{
hostContext.TraceLogger.TraceError(error.Message, true);
}
return(false);
}
}
#endregion
#region Sheet requirement
{
ICommandTypeFactory commandTypeFactory = new CommandTypeFactory(context, 1, null, false);
commandTypeFactory.Key = "SHEET_REQUIREMENT";
commandTypeFactory.Name = "Sheet requirement";
commandTypeFactory.PlugInFileName = @"AF_Clipper_Dll.dll";
commandTypeFactory.PlugInNameSpace = "AF_Clipper_Dll";
commandTypeFactory.PlugInClassName = "Clipper_Requirement_Processor";
commandTypeFactory.Shortcut = Shortcut.None;
commandTypeFactory.WorkOnEntityTypeKey = "_TO_CUT_NESTING";
commandTypeFactory.LargeImage = true;
if (!commandTypeFactory.UpdateModel())
{
foreach (ModelSettingError error in commandTypeFactory.ErrorList)
{
hostContext.TraceLogger.TraceError(error.Message, true);
}
return(false);
}
}
#endregion
return(true);
}
public override bool Execute(IContext context, IContext hostContext)
{
#region Import_OF
{
ICommandTypeFactory commandTypeFactory = new CommandTypeFactory(context, 1, null, true);
commandTypeFactory.Key = "AF_JOHN_DEERE_DLL";
commandTypeFactory.Name = "Import_OF";
commandTypeFactory.PlugInFileName = @"AF_JOHN_DEERE_Dll.dll";
commandTypeFactory.PlugInNameSpace = "AF_JOHN_DEERE";
commandTypeFactory.PlugInClassName = "JohnDeereIE";
commandTypeFactory.Shortcut = Shortcut.None;
commandTypeFactory.LargeImage = true;
commandTypeFactory.ImageFile = "";
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "IMPORT_CDA";
parameterDescription.Name = "OF";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"C:\temp";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "EXPORT_Rp";
parameterDescription.Name = "Export Sage";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"C:\temp";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "MODEL_CA";
parameterDescription.Name = "Model OF";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"0#AF_PT#string;1#AF_COMPOSANT#string;2#AF_ORDRE#string;3#_NAME#string;4#_QUANTITY#int;5#AF_BESOIN#string;6#AF_DESTINATION#date;7#AF_BROSS_EBAV#string;8#AF_KB_MRP#string;9#AF_AVANCE_RETARD#string;10#AF_CONTENANT#string;11#AF_CONTENANT_TH#string";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "MODEL_PATH";
parameterDescription.Name = "Model Chemin export";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"0#TECHNOLOGIE#string;1#ImportCda#string;0#ImportDM#string;2#ExportRp#string;3#ExportDT#string;4#Centredefrais#string;5#Destination_Path#string;6#Source_Path#string";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "STRING_FORMAT_DOUBLE";
parameterDescription.Name = "Format double";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.String;
parameterDescription.DefaultValue = @"{0:0.00###}";
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "VERBOSE_LOG";
parameterDescription.Name = "Log Verbeux";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.Boolean;
parameterDescription.DefaultValue = false;
commandTypeFactory.ParameterList.Add(parameterDescription);
}
{
IParameterDescription parameterDescription = new ParameterDescription(context.Kernel.UnitSystem, true);
parameterDescription.Key = "IMPORT_AUTO";
parameterDescription.Name = "Activer import auto";
parameterDescription.ParameterDescriptionType = ParameterDescriptionType.Boolean;
parameterDescription.DefaultValue = false;
commandTypeFactory.ParameterList.Add(parameterDescription);
}
if (!commandTypeFactory.UpdateModel())
{
foreach (ModelSettingError error in commandTypeFactory.ErrorList)
{
hostContext.TraceLogger.TraceError(error.Message, true);
}
return(false);
}
}
#endregion
return(true);
}