private void btnAddNetInformation_Click(object sender, EventArgs e)//加载油路网络信息
{
Document oDoc = default(Document);
oDoc = m_inventorApplication.ActiveDocument;
BrowserPanes oPanes = default(BrowserPanes);
oPanes = oDoc.BrowserPanes;
int delete = 17;
ClientBrowserNodeDefinition deleteoDef = oPanes.GetClientBrowserNodeDefinition(m_ClientId, delete);
while (deleteoDef != null)
{
deleteoDef.Delete();
delete++;
deleteoDef = oPanes.GetClientBrowserNodeDefinition(m_ClientId, delete);
}
ClientNodeResources oRscs = oPanes.ClientNodeResources;
ClientNodeResource oRsc = oRscs.ItemById(m_ClientId, 14);
int number = 0;
int maxId = 17;
//加载油孔网络信息
while (number < 14)
{
int j = 0;
number++;
BrowserNode node = oPanes["油路"].TopNode.BrowserNodes[number];
number--;
while (j < trViewNet.Nodes[number].Nodes.Count)
{
BrowserNodeDefinition oDef = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition(trViewNet.Nodes[number].Nodes[j].Text, maxId, oRsc);
node.AddChild(oDef);
maxId++;
j++;
}
number++;
}
foreach (Inventor.BrowserNode node in oPanes["油路"].TopNode.BrowserNodes)
{
if (node.BrowserNodes.Count == 0)
{
node.Visible = false;
}
}
oPanes["油路"].Update();
oPanes["油路"].Activate();
}
//////////////////////////////////////////////////////////////////////////////////////////////
// Creates ClientFeature that holds our dimension graphics
//
//////////////////////////////////////////////////////////////////////////////////////////////
void CreateClientFeature(Point point1, Point point2, Point dimText, Vector normal)
{
Inventor.Application InvApp = AdnInventorUtilities.InvApplication;
Document document = InvApp.ActiveDocument;
ComponentDefinition compDef =
AdnInventorUtilities.GetCompDefinition(document);
object features =
AdnInventorUtilities.GetProperty(compDef, "Features");
ClientFeatures clientFeatures =
AdnInventorUtilities.GetProperty(features, "ClientFeatures")
as ClientFeatures;
ClientFeatureDefinition cfDef =
clientFeatures.CreateDefinition(
"Dimension Feature",
null, null, null);
ClientFeature clientFeature =
clientFeatures.Add(cfDef, AdnInventorUtilities.AddInGuid);
cfDef = clientFeature.Definition;
cfDef.HighlightClientGraphicsWithFeature = true;
NativeBrowserNodeDefinition nodeDef =
clientFeature.BrowserNode.BrowserNodeDefinition as NativeBrowserNodeDefinition;
stdole.IPictureDisp pic =
PictureDispConverter.ToIPictureDisp(Resources.dimlinear);
ClientNodeResource res =
document.BrowserPanes.ClientNodeResources.Add(
AdnInventorUtilities.AddInGuid,
document.BrowserPanes.ClientNodeResources.Count + 1,
pic);
nodeDef.OverrideIcon = res;
_clientGraphicsMng.SetGraphicsSource(clientFeature);
DrawDimension(point1, point2, dimText, normal);
_clientGraphicsMng.UpdateView();
}
private void AddTreePortName(string NetName, int number, int NetNumber)
{
Document oDoc = default(Document);
oDoc = m_inventorApplication.ActiveDocument;
BrowserPanes oPanes = default(BrowserPanes);
oPanes = oDoc.BrowserPanes;
ClientNodeResources oRscs = oPanes.ClientNodeResources;
//单一孔特征的图标显示
ClientNodeResource oRsc = oRscs.ItemById(m_ClientId, 14);
BrowserNodeDefinition oDef1 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition(NetName, number, oRsc);
Inventor.BrowserNode node = oPanes["油路"].TopNode.BrowserNodes[NetNumber];
node.AddChild(oDef1);
}
/// <summary>
/// When [HierarchicalBrowser] button is clicked
/// </summary>
/// <param name="Context"></param>
/// <remarks></remarks>
private void m_TreeViewBrowser_OnExecute(Inventor.NameValueMap Context)
{
Document oDoc = default(Document);
oDoc = m_inventorApplication.ActiveDocument;
BrowserPanes oPanes = default(BrowserPanes);
oPanes = oDoc.BrowserPanes;
//Create a standard Microsoft Windows IPictureDisp referencing an icon (.bmp) bitmap file.
//Change the file referenced here as appropriate - here the code references test.bmp.
//This is the icon that will be displayed at this node. Add the IPictureDisp to the client node resource.
ClientNodeResources oRscs = oPanes.ClientNodeResources;
stdole.IPictureDisp clientNodeIcon = AxHostConverter.ImageToPictureDisp(new Bitmap(@"Resources\test.bmp"));
ClientNodeResource oRsc = oRscs.Add(m_ClientId, 1, clientNodeIcon);
BrowserNodeDefinition oDef = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition("Top Node", 3, oRsc);
//adding a new pane tab to the panes collection, define the top node the pane will contain.
Inventor.BrowserPane oPane = oPanes.AddTreeBrowserPane("My Pane", m_ClientId, oDef);
//Add two child nodes to the tree, labeled Node 2 and Node 3.
BrowserNodeDefinition oDef1 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition("Node2", 5, oRsc);
BrowserNode oNode1 = oPane.TopNode.AddChild(oDef1);
BrowserNodeDefinition oDef2 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition("Node3", 6, oRsc);
BrowserNode oNode2 = oPane.TopNode.AddChild(oDef2);
//Add the native node (from root) of "Model" pane to the tree
BrowserNode oNativeRootNode = default(BrowserNode);
oNativeRootNode = oDoc.BrowserPanes["Model"].TopNode;
oPane.TopNode.AddChild(oNativeRootNode.BrowserNodeDefinition);
}
//////////////////////////////////////////////////////////////////////////////////////////////
// Simple example using Inventor API directly
//
//////////////////////////////////////////////////////////////////////////////////////////////
public static void ClientFeatureDemo()
{
string clientId = AdnInventorUtilities.AddInGuid;
Inventor.Application InvApp = AdnInventorUtilities.InvApplication;
Document document = InvApp.ActiveDocument;
// We will use late binding to retrieve ClientFeatures collection,
// so we dont need to write specific code for PartDocument and
// AssemblyDocument
ComponentDefinition compDef =
AdnInventorUtilities.GetCompDefinition(document);
object features =
AdnInventorUtilities.GetProperty(compDef, "Features");
ClientFeatures clientFeatures =
AdnInventorUtilities.GetProperty(features, "ClientFeatures")
as ClientFeatures;
ClientFeatureDefinition cfDef =
clientFeatures.CreateDefinition("Graphics Feature", null, null, null);
ClientFeature clientFeature =
clientFeatures.Add(cfDef, clientId);
NativeBrowserNodeDefinition nodeDef =
clientFeature.BrowserNode.BrowserNodeDefinition as NativeBrowserNodeDefinition;
stdole.IPictureDisp pic =
PictureDispConverter.ToIPictureDisp(Resources.PointImage);
ClientNodeResource res =
document.BrowserPanes.ClientNodeResources.Add(
clientId,
document.BrowserPanes.ClientNodeResources.Count + 1,
pic);
nodeDef.OverrideIcon = res;
cfDef = clientFeature.Definition;
cfDef.HighlightClientGraphicsWithFeature = true;
GraphicsDataSets sets =
cfDef.GraphicsDataSetsCollection.Add2(clientId, true);
GraphicsCoordinateSet coordSet = sets.CreateCoordinateSet(1);
double[] coords = new double[]
{
0.0, 0.0, 0.0,
5.0, 0.0, 0.0,
2.5, 5.0, 0.0
};
coordSet.PutCoordinates(ref coords);
ClientGraphics cg =
cfDef.ClientGraphicsCollection.Add(clientId);
GraphicsNode node = cg.AddNode(1);
node.RenderStyle = document.RenderStyles["Green (Flat)"];
TriangleGraphics primitive = node.AddTriangleGraphics();
primitive.CoordinateSet = coordSet;
InvApp.ActiveView.Update();
}
//////////////////////////////////////////////////////////////////////////////////////////////
// Example using the AdnClientGraphicsManager
//
//////////////////////////////////////////////////////////////////////////////////////////////
public static void DemoMng()
{
Inventor.Application InvApp = AdnInventorUtilities.InvApplication;
Document document = InvApp.ActiveDocument;
// We will use late binding to retrieve ClientFeatures collection,
// so we dont need to write specific code for PartDocument and
// AssemblyDocument
ComponentDefinition compDef =
AdnInventorUtilities.GetCompDefinition(document);
object features =
AdnInventorUtilities.GetProperty(compDef, "Features");
ClientFeatures clientFeatures =
AdnInventorUtilities.GetProperty(features, "ClientFeatures")
as ClientFeatures;
ClientFeatureDefinition cfDef =
clientFeatures.CreateDefinition("Graphics Feature", null, null, null);
ClientFeature clientFeature =
clientFeatures.Add(cfDef, AdnInventorUtilities.AddInGuid);
cfDef = clientFeature.Definition;
cfDef.HighlightClientGraphicsWithFeature = true;
NativeBrowserNodeDefinition nodeDef =
clientFeature.BrowserNode.BrowserNodeDefinition as NativeBrowserNodeDefinition;
stdole.IPictureDisp pic =
PictureDispConverter.ToIPictureDisp(Resources.PointImage);
ClientNodeResource res =
document.BrowserPanes.ClientNodeResources.Add(
AdnInventorUtilities.AddInGuid,
document.BrowserPanes.ClientNodeResources.Count + 1,
pic);
nodeDef.OverrideIcon = res;
AdnClientGraphicsManager clientGraphicsMng = new AdnClientGraphicsManager(
InvApp,
AdnInventorUtilities.AddInGuid);
clientGraphicsMng.SetGraphicsSource(clientFeature);
Random rd = new Random();
TriangleGraphics graphics = clientGraphicsMng.DrawTriangle(
new double[] { rd.Next(0, 10), rd.Next(0, 10), rd.Next(0, 10) },
new double[] { rd.Next(0, 10), rd.Next(0, 10), rd.Next(0, 10) },
new double[] { rd.Next(0, 10), rd.Next(0, 10), rd.Next(0, 10) },
null);
int id = clientGraphicsMng.WorkingGraphics.GetDataSetFreeId();
GraphicsColorSet colorSet =
clientGraphicsMng.WorkingGraphics.GraphicsDataSets.CreateColorSet(id);
colorSet.Add(1, (byte)rd.Next(0, 255), (byte)rd.Next(0, 255), (byte)rd.Next(0, 255));
graphics.ColorSet = colorSet;
clientGraphicsMng.UpdateView();
}
//-----------------------------------------------------------------------------------
//从项目数据库加载油路信息
private void AddNetInformationFrommdb()
{
Document oDoc = default(Document);
oDoc = m_inventorApplication.ActiveDocument;
BrowserPanes oPanes = default(BrowserPanes);
oPanes = oDoc.BrowserPanes;
int delete = 15;
ClientBrowserNodeDefinition deleteoDef = oPanes.GetClientBrowserNodeDefinition(m_ClientId, delete);
while (deleteoDef != null)
{
deleteoDef.Delete();
delete++;
deleteoDef = oPanes.GetClientBrowserNodeDefinition(m_ClientId, delete);
}
ClientNodeResources oRscs = oPanes.ClientNodeResources;
ClientNodeResource oRsc = oRscs.ItemById(m_ClientId, 14);
string[] getresult = new string[25];
m_connectToaccess = new ConnectToAccess(deFaultpath + "\\CavityLibrary", "项目数据库");
string sql = @"select * from NETList";
int number = 15;
#region
m_connectToaccess.GetInformation(sql, "NET1", out getresult);
int i = 0;
while (getresult[i] != null)
{
if (getresult[i].ToString().Length > 0)
{
BrowserNodeDefinition oDef1 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition(getresult[i], number, oRsc);
Inventor.BrowserNode node = oPanes["油路"].TopNode.BrowserNodes[1];
node.AddChild(oDef1);
number++;
}
i++;
}
m_connectToaccess.GetInformation(sql, "NET2", out getresult);
i = 0;
while (getresult[i] != null)
{
if (getresult[i].ToString().Length > 0)
{
BrowserNodeDefinition oDef1 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition(getresult[i], number, oRsc);
Inventor.BrowserNode node = oPanes["油路"].TopNode.BrowserNodes[2];
node.AddChild(oDef1);
number++;
}
i++;
}
m_connectToaccess.GetInformation(sql, "NET3", out getresult);
i = 0;
while (getresult[i] != null)
{
if (getresult[i].ToString().Length > 0)
{
BrowserNodeDefinition oDef1 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition(getresult[i], number, oRsc);
Inventor.BrowserNode node = oPanes["油路"].TopNode.BrowserNodes[3];
node.AddChild(oDef1);
number++;
}
i++;
}
m_connectToaccess.GetInformation(sql, "NET4", out getresult);
i = 0;
while (getresult[i] != null)
{
if (getresult[i].ToString().Length > 0)
{
BrowserNodeDefinition oDef1 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition(getresult[i], number, oRsc);
Inventor.BrowserNode node = oPanes["油路"].TopNode.BrowserNodes[4];
node.AddChild(oDef1);
number++;
}
i++;
}
m_connectToaccess.GetInformation(sql, "NET5", out getresult);
i = 0;
while (getresult[i] != null)
{
if (getresult[i].ToString().Length > 0)
{
BrowserNodeDefinition oDef1 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition(getresult[i], number, oRsc);
Inventor.BrowserNode node = oPanes["油路"].TopNode.BrowserNodes[5];
node.AddChild(oDef1);
number++;
}
i++;
}
m_connectToaccess.GetInformation(sql, "NET6", out getresult);
i = 0;
while (getresult[i] != null)
{
if (getresult[i].ToString().Length > 0)
{
BrowserNodeDefinition oDef1 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition(getresult[i], number, oRsc);
Inventor.BrowserNode node = oPanes["油路"].TopNode.BrowserNodes[6];
node.AddChild(oDef1);
number++;
}
i++;
}
m_connectToaccess.GetInformation(sql, "NET7", out getresult);
i = 0;
while (getresult[i] != null)
{
if (getresult[i].ToString().Length > 0)
{
BrowserNodeDefinition oDef1 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition(getresult[i], number, oRsc);
Inventor.BrowserNode node = oPanes["油路"].TopNode.BrowserNodes[7];
node.AddChild(oDef1);
number++;
}
i++;
}
m_connectToaccess.GetInformation(sql, "NET8", out getresult);
i = 0;
while (getresult[i] != null)
{
if (getresult[i].ToString().Length > 0)
{
BrowserNodeDefinition oDef1 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition(getresult[i], number, oRsc);
Inventor.BrowserNode node = oPanes["油路"].TopNode.BrowserNodes[8];
node.AddChild(oDef1);
number++;
}
i++;
}
m_connectToaccess.GetInformation(sql, "NET9", out getresult);
i = 0;
while (getresult[i] != null)
{
if (getresult[i].ToString().Length > 0)
{
BrowserNodeDefinition oDef1 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition(getresult[i], number, oRsc);
Inventor.BrowserNode node = oPanes["油路"].TopNode.BrowserNodes[9];
node.AddChild(oDef1);
number++;
}
i++;
}
m_connectToaccess.GetInformation(sql, "NET10", out getresult);
i = 0;
while (getresult[i] != null)
{
if (getresult[i].ToString().Length > 0)
{
BrowserNodeDefinition oDef1 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition(getresult[i], number, oRsc);
Inventor.BrowserNode node = oPanes["油路"].TopNode.BrowserNodes[10];
node.AddChild(oDef1);
number++;
}
i++;
}
m_connectToaccess.GetInformation(sql, "NET11", out getresult);
i = 0;
while (getresult[i] != null)
{
if (getresult[i].ToString().Length > 0)
{
BrowserNodeDefinition oDef1 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition(getresult[i], number, oRsc);
Inventor.BrowserNode node = oPanes["油路"].TopNode.BrowserNodes[11];
node.AddChild(oDef1);
number++;
}
i++;
}
m_connectToaccess.GetInformation(sql, "NET12", out getresult);
i = 0;
while (getresult[i] != null)
{
if (getresult[i].ToString().Length > 0)
{
BrowserNodeDefinition oDef1 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition(getresult[i], number, oRsc);
Inventor.BrowserNode node = oPanes["油路"].TopNode.BrowserNodes[12];
node.AddChild(oDef1);
number++;
}
i++;
}
m_connectToaccess.GetInformation(sql, "NULLNET", out getresult);
i = 0;
while (getresult[i] != null)
{
if (getresult[i].ToString().Length > 0)
{
BrowserNodeDefinition oDef1 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition(getresult[i], number, oRsc);
Inventor.BrowserNode node = oPanes["油路"].TopNode.BrowserNodes[13];
node.AddChild(oDef1);
number++;
}
i++;
}
#endregion//加载油孔网络信息
foreach (Inventor.BrowserNode node in oPanes["油路"].TopNode.BrowserNodes)
{
if (node.BrowserNodes.Count == 0)
{
node.Visible = false;
}
}
oPanes["油路"].Update();
oPanes["油路"].Activate();
}
private void AddTreeBrowersPane()
{
IconPictureInitial();
Document oDoc = default(Document);
oDoc = m_inventorApplication.ActiveDocument;
BrowserPanes oPanes = default(BrowserPanes);
oPanes = oDoc.BrowserPanes;
System.IO.Stream oStream_Block = assembly.GetManifestResourceStream("ValveBlockDesign.resources.BlockStandard.ico");
System.Drawing.Icon oIcon_Block = new System.Drawing.Icon(oStream_Block);
System.IO.Stream oStream_NET1 = assembly.GetManifestResourceStream("ValveBlockDesign.resources.NET1.ico");
System.Drawing.Icon oIcon_NET1 = new System.Drawing.Icon(oStream_NET1);
System.IO.Stream oStream_NET2 = assembly.GetManifestResourceStream("ValveBlockDesign.resources.NET2.ico");
System.Drawing.Icon oIcon_NET2 = new System.Drawing.Icon(oStream_NET2);
System.IO.Stream oStream_NET3 = assembly.GetManifestResourceStream("ValveBlockDesign.resources.NET3.ico");
System.Drawing.Icon oIcon_NET3 = new System.Drawing.Icon(oStream_NET3);
System.IO.Stream oStream_NET4 = assembly.GetManifestResourceStream("ValveBlockDesign.resources.NET4.ico");
System.Drawing.Icon oIcon_NET4 = new System.Drawing.Icon(oStream_NET4);
System.IO.Stream oStream_NET5 = assembly.GetManifestResourceStream("ValveBlockDesign.resources.NET5.ico");
System.Drawing.Icon oIcon_NET5 = new System.Drawing.Icon(oStream_NET5);
System.IO.Stream oStream_NET6 = assembly.GetManifestResourceStream("ValveBlockDesign.resources.NET6.ico");
System.Drawing.Icon oIcon_NET6 = new System.Drawing.Icon(oStream_NET6);
System.IO.Stream oStream_NET7 = assembly.GetManifestResourceStream("ValveBlockDesign.resources.NET7.ico");
System.Drawing.Icon oIcon_NET7 = new System.Drawing.Icon(oStream_NET7);
System.IO.Stream oStream_NET8 = assembly.GetManifestResourceStream("ValveBlockDesign.resources.NET8.ico");
System.Drawing.Icon oIcon_NET8 = new System.Drawing.Icon(oStream_NET8);
System.IO.Stream oStream_NET9 = assembly.GetManifestResourceStream("ValveBlockDesign.resources.NET9.ico");
System.Drawing.Icon oIcon_NET9 = new System.Drawing.Icon(oStream_NET9);
System.IO.Stream oStream_NET10 = assembly.GetManifestResourceStream("ValveBlockDesign.resources.NET10.ico");
System.Drawing.Icon oIcon_NET10 = new System.Drawing.Icon(oStream_NET10);
System.IO.Stream oStream_NET11 = assembly.GetManifestResourceStream("ValveBlockDesign.resources.NET11.ico");
System.Drawing.Icon oIcon_NET11 = new System.Drawing.Icon(oStream_NET11);
System.IO.Stream oStream_NET12 = assembly.GetManifestResourceStream("ValveBlockDesign.resources.NET12.ico");
System.Drawing.Icon oIcon_NET12 = new System.Drawing.Icon(oStream_NET12);
System.IO.Stream oStream_NET13 = assembly.GetManifestResourceStream("ValveBlockDesign.resources.NET13.ico");
System.Drawing.Icon oIcon_NET13 = new System.Drawing.Icon(oStream_NET13);
System.IO.Stream oStream_NET14 = assembly.GetManifestResourceStream("ValveBlockDesign.resources.NET14.ico");
System.Drawing.Icon oIcon_NET14 = new System.Drawing.Icon(oStream_NET14);
System.IO.Stream oStream_NULL = assembly.GetManifestResourceStream("ValveBlockDesign.resources.NULL.ico");
System.Drawing.Icon oIcon_NULL = new System.Drawing.Icon(oStream_NULL);
System.IO.Stream oStream_Cavity = assembly.GetManifestResourceStream("ValveBlockDesign.resources.Cavity.ico");
System.Drawing.Icon oIcon_Cavity = new System.Drawing.Icon(oStream_Cavity);
System.IO.Stream oStream_Footprint = assembly.GetManifestResourceStream("ValveBlockDesign.resources.Footprint.ico");
System.Drawing.Icon oIcon_Footprint = new System.Drawing.Icon(oStream_Footprint);
//This is the icon that will be displayed at this node. Add the IPictureDisp to the client node resource.
ClientNodeResources oRscs = oPanes.ClientNodeResources;
stdole.IPictureDisp clientNodeIcon = ValveBlockDesign.StandardAddInServer.AxHostConverter.ImageToPictureDisp(oIcon_Block.ToBitmap());
ClientNodeResource oRsc = oRscs.Add(m_ClientId, 1, clientNodeIcon);
stdole.IPictureDisp clientNodeIcon1 = ValveBlockDesign.StandardAddInServer.AxHostConverter.ImageToPictureDisp(oIcon_NET1.ToBitmap());
ClientNodeResource oRsc1 = oRscs.Add(m_ClientId, 2, clientNodeIcon1);
stdole.IPictureDisp clientNodeIcon2 = ValveBlockDesign.StandardAddInServer.AxHostConverter.ImageToPictureDisp(oIcon_NET2.ToBitmap());
ClientNodeResource oRsc2 = oRscs.Add(m_ClientId, 3, clientNodeIcon2);
stdole.IPictureDisp clientNodeIcon3 = ValveBlockDesign.StandardAddInServer.AxHostConverter.ImageToPictureDisp(oIcon_NET3.ToBitmap());
ClientNodeResource oRsc3 = oRscs.Add(m_ClientId, 4, clientNodeIcon3);
stdole.IPictureDisp clientNodeIcon4 = ValveBlockDesign.StandardAddInServer.AxHostConverter.ImageToPictureDisp(oIcon_NET4.ToBitmap());
ClientNodeResource oRsc4 = oRscs.Add(m_ClientId, 5, clientNodeIcon4);
stdole.IPictureDisp clientNodeIcon5 = ValveBlockDesign.StandardAddInServer.AxHostConverter.ImageToPictureDisp(oIcon_NET5.ToBitmap());
ClientNodeResource oRsc5 = oRscs.Add(m_ClientId, 6, clientNodeIcon5);
stdole.IPictureDisp clientNodeIcon6 = ValveBlockDesign.StandardAddInServer.AxHostConverter.ImageToPictureDisp(oIcon_NET6.ToBitmap());
ClientNodeResource oRsc6 = oRscs.Add(m_ClientId, 7, clientNodeIcon6);
stdole.IPictureDisp clientNodeIcon7 = ValveBlockDesign.StandardAddInServer.AxHostConverter.ImageToPictureDisp(oIcon_NET7.ToBitmap());
ClientNodeResource oRsc7 = oRscs.Add(m_ClientId, 8, clientNodeIcon7);
stdole.IPictureDisp clientNodeIcon8 = ValveBlockDesign.StandardAddInServer.AxHostConverter.ImageToPictureDisp(oIcon_NET8.ToBitmap());
ClientNodeResource oRsc8 = oRscs.Add(m_ClientId, 9, clientNodeIcon8);
stdole.IPictureDisp clientNodeIcon9 = ValveBlockDesign.StandardAddInServer.AxHostConverter.ImageToPictureDisp(oIcon_NET9.ToBitmap());
ClientNodeResource oRsc9 = oRscs.Add(m_ClientId, 10, clientNodeIcon9);
stdole.IPictureDisp clientNodeIcon10 = ValveBlockDesign.StandardAddInServer.AxHostConverter.ImageToPictureDisp(oIcon_NET10.ToBitmap());
ClientNodeResource oRsc10 = oRscs.Add(m_ClientId, 11, clientNodeIcon10);
stdole.IPictureDisp clientNodeIcon11 = ValveBlockDesign.StandardAddInServer.AxHostConverter.ImageToPictureDisp(oIcon_NET11.ToBitmap());
ClientNodeResource oRsc11 = oRscs.Add(m_ClientId, 12, clientNodeIcon11);
stdole.IPictureDisp clientNodeIcon12 = ValveBlockDesign.StandardAddInServer.AxHostConverter.ImageToPictureDisp(oIcon_NET12.ToBitmap());
ClientNodeResource oRsc12 = oRscs.Add(m_ClientId, 13, clientNodeIcon12);
stdole.IPictureDisp clientNodeIcon13 = ValveBlockDesign.StandardAddInServer.AxHostConverter.ImageToPictureDisp(oIcon_Cavity.ToBitmap());
ClientNodeResource oRsc13 = oRscs.Add(m_ClientId, 14, clientNodeIcon13);
stdole.IPictureDisp clientNodeIcon14 = ValveBlockDesign.StandardAddInServer.AxHostConverter.ImageToPictureDisp(oIcon_Footprint.ToBitmap());
ClientNodeResource oRsc14 = oRscs.Add(m_ClientId, 15, clientNodeIcon14);
stdole.IPictureDisp clientNodeIcon15 = ValveBlockDesign.StandardAddInServer.AxHostConverter.ImageToPictureDisp(oIcon_NULL.ToBitmap());
ClientNodeResource oRsc15 = oRscs.Add(m_ClientId, 16, clientNodeIcon15);
stdole.IPictureDisp clientNodeIcon16 = ValveBlockDesign.StandardAddInServer.AxHostConverter.ImageToPictureDisp(oIcon_NET13.ToBitmap());
ClientNodeResource oRsc16 = oRscs.Add(m_ClientId, 17, clientNodeIcon16);
stdole.IPictureDisp clientNodeIcon17 = ValveBlockDesign.StandardAddInServer.AxHostConverter.ImageToPictureDisp(oIcon_NET14.ToBitmap());
ClientNodeResource oRsc17 = oRscs.Add(m_ClientId, 18, clientNodeIcon17);
BrowserNodeDefinition oDef = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition("网络清单", 1, oRsc);
Inventor.BrowserPane oPane = oPanes.AddTreeBrowserPane("油路", m_ClientId, oDef);
Inventor.BrowserNode topNode = oPanes["油路"].TopNode;
BrowserNodeDefinition oDef1 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition("NET1", 2, oRsc1);
topNode.AddChild(oDef1);
BrowserNodeDefinition oDef2 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition("NET2", 3, oRsc2);
topNode.AddChild(oDef2);
BrowserNodeDefinition oDef3 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition("NET3", 4, oRsc3);
topNode.AddChild(oDef3);
BrowserNodeDefinition oDef4 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition("NET4", 5, oRsc4);
topNode.AddChild(oDef4);
BrowserNodeDefinition oDef5 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition("NET5", 6, oRsc5);
topNode.AddChild(oDef5);
BrowserNodeDefinition oDef6 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition("NET6", 7, oRsc6);
topNode.AddChild(oDef6);
BrowserNodeDefinition oDef7 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition("NET7", 8, oRsc7);
topNode.AddChild(oDef7);
BrowserNodeDefinition oDef8 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition("NET8", 9, oRsc8);
topNode.AddChild(oDef8);
BrowserNodeDefinition oDef9 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition("NET9", 10, oRsc9);
topNode.AddChild(oDef9);
BrowserNodeDefinition oDef10 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition("NET10", 11, oRsc10);
topNode.AddChild(oDef10);
BrowserNodeDefinition oDef11 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition("NET11", 12, oRsc11);
topNode.AddChild(oDef11);
BrowserNodeDefinition oDef12 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition("NET12", 13, oRsc12);
topNode.AddChild(oDef12);
BrowserNodeDefinition oDef13 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition("NET13", 14, oRsc16);
topNode.AddChild(oDef13);
BrowserNodeDefinition oDef14 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition("NET14", 15, oRsc17);
topNode.AddChild(oDef14);
BrowserNodeDefinition oDef15 = (BrowserNodeDefinition)oPanes.CreateBrowserNodeDefinition("NULLNET", 16, oRsc15);
topNode.AddChild(oDef15);
oPanes["油路"].Update();
oPanes["模型"].Activate();
}//创建浏览器节点
private void Button_ok_Click(object sender, EventArgs e)
{
// references to some useful objects
TransientGeometry geom = m_inventorApplication.TransientGeometry;
//PartDocument document = m_inventorApplication.ActiveDocument as PartDocument;
//_Document document = m_inventorApplication.ActiveDocument;
/*
* if (document == null)
* {
* AssemblyDocument asm = m_inventorApplication.ActiveDocument as AssemblyDocument;
* m_inventorApplication.ActiveDocument;
* }
*/
PartComponentDefinition def; // = document.ComponentDefinition;
UnitsOfMeasure units; // = document.UnitsOfMeasure;
UserParameters user_params;
Document document = m_inventorApplication.ActiveDocument;
if (m_inventorApplication.ActiveDocument is AssemblyDocument)
{
AssemblyDocument doc = m_inventorApplication.ActiveDocument as AssemblyDocument;
PartDocument part = doc.ActivatedObject as PartDocument;
if (part == null)
{
m_inventorApplication.ErrorManager.Show("Please activate a part!", true, false);
return;
}
def = part.ComponentDefinition;
units = part.UnitsOfMeasure;
user_params = part.ComponentDefinition.Parameters.UserParameters;
}
else if (m_inventorApplication.ActiveDocument is PartDocument)
{
PartDocument doc = m_inventorApplication.ActiveDocument as PartDocument;
def = doc.ComponentDefinition;
units = doc.UnitsOfMeasure;
user_params = doc.ComponentDefinition.Parameters.UserParameters;
}
else
{
m_inventorApplication.ErrorManager.Show("Current document is neither an Assembly nor a Part.", true, false);
return;
}
// get and check selected faces
ObjectsEnumerator JustSelectedEntities = m_selects.SelectedEntities;
if (JustSelectedEntities.Count == 0)
{
m_inventorApplication.ErrorManager.Show("Select at least one planar, rectangular face.", true, false);
return;
}
foreach (Object _f in JustSelectedEntities)
{
Face f = _f as Face;
if (f == null)
{
m_inventorApplication.ErrorManager.Show("Somehow, you managed to select something that isn't a face. This should not happen, please report it.", true, false);
return;
}
if (f.Edges.Count != 4)
{
m_inventorApplication.ErrorManager.Show("Please only select rectangular faces.", true, false);
return;
}
}
// TODO: catch exception when invalid was is entered
UserParameter tab_user_constr;
if (m_dialog.mode_count.Checked)
{
tab_user_constr = user_params.AddByExpression("tab_count", m_dialog.tab_size_input.Text, UnitsTypeEnum.kUnitlessUnits);
}
else
{
tab_user_constr = user_params.AddByExpression("tab_size", m_dialog.tab_size_input.Text, UnitsTypeEnum.kDefaultDisplayLengthUnits);
}
int total_operations = JustSelectedEntities.Count;
WorkAxis[] extrusion_dir = new WorkAxis[total_operations];
bool[] long_edge_dir = new bool[total_operations];
PlanarSketch[] all_sketches = new PlanarSketch[total_operations];
Profile[] profile = new Profile[total_operations];
ExtrudeFeature[] extrusion = new ExtrudeFeature[total_operations];
TwoPointDistanceDimConstraint[] tab_length_constr = new TwoPointDistanceDimConstraint[total_operations];
TwoPointDistanceDimConstraint[] tab_widthdepth_constr = new TwoPointDistanceDimConstraint[total_operations];
TwoPointDistanceDimConstraint[] total_length_constr = new TwoPointDistanceDimConstraint[total_operations];
RectangularPatternFeature[] rect_pattern = new RectangularPatternFeature[total_operations];
Transaction transaction = m_inventorApplication.TransactionManager.StartTransaction(m_inventorApplication.ActiveDocument, "LaserTab");
// create extrusion feature for each face
int i = 0;
foreach (Object _f in JustSelectedEntities)
{
Face f = _f as Face;
if (_f is FaceProxy)
{
f = ((FaceProxy)_f).NativeObject;
}
// TODO: make sure active document is a partDocument and ActiveEditObject is not a sketch (should be also a partDocument?)
// TODO: wrap it all into a ClientFeature
// TODO: maybe also wrap it in a Transaction?
// create sketch
PlanarSketch sketch = def.Sketches.Add(f, false); // don't project anything
//PlanarSketch sketch = def.Sketches.Add(f, true); // project existing geometry
//PlanarSketch sketch = def.Sketches.AddWithOrientation(f, long_edge, true, true, long_edge.StartVertex, true);
Edge short_edge, long_edge;
Vertex vert_origin, vert_short_end, vert_long_end;
determine_orientation(f, out long_edge, out short_edge, out vert_origin, out vert_long_end, out vert_short_end);
// remember wheter 'long_edge' starts or stops at 'P_orig' (which is important for the direction of the rectangular pattern)
long_edge_dir[i] = long_edge.StartVertex == vert_origin;
extrusion_dir[i] = def.WorkAxes.AddByLine(long_edge, true);
// project important points
SketchPoint P_orig = sketch.AddByProjectingEntity(vert_origin) as SketchPoint;
SketchPoint P_long = sketch.AddByProjectingEntity(vert_long_end) as SketchPoint;
SketchPoint P_short = sketch.AddByProjectingEntity(vert_short_end) as SketchPoint; // fails! :(
// driven constraint of short dimension (determining thickness and depth of tab)
tab_widthdepth_constr[i] = sketch.DimensionConstraints.AddTwoPointDistance(
P_orig, P_short, DimensionOrientationEnum.kAlignedDim,
P_short.Geometry, true);
// driven constraint of long dimenstion (determining number/size of tabs)
total_length_constr[i] = sketch.DimensionConstraints.AddTwoPointDistance(
P_orig, P_long, DimensionOrientationEnum.kAlignedDim,
P_long.Geometry, true);
// appearantly, Profiles.AddForSolid() doesn't like lines that are made entirely out of projected points... (maybe because the line already exists?)
SketchPoint P_orig_proj = P_orig, P_short_proj = P_short;
P_short = sketch.SketchPoints.Add(P_short_proj.Geometry, false);
P_orig = sketch.SketchPoints.Add(P_orig_proj.Geometry, false);
// create dimension constraints
// TODO: calculate better position for text label
//Debug.Print("constraint short: {0} = {1}", constr_short.Parameter.Expression, constr_short.Parameter.Value);
//Debug.Print("constraint long: {0} = {1}", constr_long.Parameter.Expression, constr_long.Parameter.Value);
// create endpoint for rectangle
Point2d P_end2 = P_short.Geometry.Copy();
Point2d P_end1 = P_orig.Geometry.Copy();
Vector2d long_direction = P_orig.Geometry.VectorTo(P_long.Geometry);
long_direction.ScaleBy(0.2);
P_end1.TranslateBy(long_direction);
P_end2.TranslateBy(long_direction);
SketchPoint P_end1_sk = sketch.SketchPoints.Add(P_end1, false);
SketchPoint P_end2_sk = sketch.SketchPoints.Add(P_end2, false);
// constrain endpoints properly
//sketch.GeometricConstraints.AddCoincident((SketchEntity)long_line2, (SketchEntity)P_end2_sk);
//sketch.GeometricConstraints.AddCoincident((SketchEntity)long_line, (SketchEntity)P_end1_sk);
// constraint for tab length (twice, once for each side of the rectangle)
TwoPointDistanceDimConstraint tab_len_constraint1 = sketch.DimensionConstraints.AddTwoPointDistance(P_orig, P_end1_sk, DimensionOrientationEnum.kAlignedDim, P_end1);
TwoPointDistanceDimConstraint tab_len_constraint2 = sketch.DimensionConstraints.AddTwoPointDistance(P_short, P_end2_sk, DimensionOrientationEnum.kAlignedDim, P_end2);
tab_length_constr[i] = tab_len_constraint1;
// {0}: total length
// {1}: user input (count or length of single tab)
string expr;
if (m_dialog.mode_count.Checked)
{
if (m_dialog.force_parity.Checked)
{
if (m_dialog.parity_even.Checked)
{
expr = "{0} / ( round({1}/2)*2 )";
}
else
{
expr = "{0} / ( round( ({1}+1)/2 )*2 - 1 )";
}
}
else
{
expr = "{0} / {1}";
}
}
else
{
// TODO: take dropdown of >/</~ into account
if (m_dialog.force_parity.Checked)
{
if (m_dialog.parity_even.Checked)
{
expr = "{0} / ( round( {0}/{1}/2 )*2 )";
}
else
{
expr = "{0} / ( round( ({0}/{1}+1)/2 )*2 - 1)";
}
}
else
{
expr = "{0} / round({0}/{1})";
}
}
tab_len_constraint1.Parameter.Expression = string.Format(expr, total_length_constr[i].Parameter.Name, tab_user_constr.Name);
tab_len_constraint2.Parameter.Expression = tab_len_constraint1.Parameter.Name;
// create a rectangle based on these points
// two-point rectangle is always axis-aligned -> doesn't work for rotated stuff
//SketchEntitiesEnumerator rect = sketch.SketchLines.AddAsTwoPointRectangle(P_orig, P_end_sk);
// this is cumbersome, as the third point is transient and therefore the rectangle would have to be constrained afterwards
//SketchEntitiesEnumerator rect = sketch.SketchLines.AddAsThreePointRectangle(P_orig, P_short, P_end);
ObjectCollection rect = m_inventorApplication.TransientObjects.CreateObjectCollection();
rect.Add(sketch.SketchLines.AddByTwoPoints(P_orig, P_end1_sk));
rect.Add(sketch.SketchLines.AddByTwoPoints(P_end1_sk, P_end2_sk));
rect.Add(sketch.SketchLines.AddByTwoPoints(P_end2_sk, P_short));
rect.Add(sketch.SketchLines.AddByTwoPoints(P_short, P_orig));
// constrain rectangle
if (m_dialog.offset.Checked)
{
sketch.GeometricConstraints.AddCoincident((SketchEntity)rect[1], (SketchEntity)P_orig_proj);
sketch.GeometricConstraints.AddCoincident((SketchEntity)rect[3], (SketchEntity)P_short_proj);
sketch.GeometricConstraints.AddPerpendicular((SketchEntity)rect[1], (SketchEntity)rect[2]);
TwoPointDistanceDimConstraint offset_dist = sketch.DimensionConstraints.AddTwoPointDistance(P_orig, P_orig_proj, DimensionOrientationEnum.kAlignedDim, P_orig_proj.Geometry);
offset_dist.Parameter.Expression = tab_len_constraint1.Parameter.Name;
}
else
{
sketch.GeometricConstraints.AddCoincident((SketchEntity)P_short, (SketchEntity)P_short_proj);
sketch.GeometricConstraints.AddCoincident((SketchEntity)P_orig, (SketchEntity)P_orig_proj);
}
sketch.GeometricConstraints.AddCoincident((SketchEntity)rect[1], (SketchEntity)P_long);
sketch.GeometricConstraints.AddParallel((SketchEntity)rect[1], (SketchEntity)rect[3]);
profile[i] = sketch.Profiles.AddForSolid(false, rect);
all_sketches[i] = sketch;
i++;
}
// do extrusions
for (i = 0; i < total_operations; i++)
{
string dist_expr;
if (m_dialog.auto_depth.Checked)
{
// use thickness of material
dist_expr = tab_widthdepth_constr[i].Parameter.Name;
}
else
{
// use user input
// TODO: validate!
dist_expr = m_dialog.tab_depth_input.Text;
}
PartFeatureExtentDirectionEnum dir;
PartFeatureOperationEnum op;
if (m_dialog.extrude_positive.Checked)
{
dir = PartFeatureExtentDirectionEnum.kPositiveExtentDirection;
op = PartFeatureOperationEnum.kJoinOperation;
}
else
{
dir = PartFeatureExtentDirectionEnum.kNegativeExtentDirection;
op = PartFeatureOperationEnum.kCutOperation;
}
// extrude said rectangle
ExtrudeDefinition extrusion_def = def.Features.ExtrudeFeatures.CreateExtrudeDefinition(profile[i], op);
extrusion_def.SetDistanceExtent(dist_expr, dir);
extrusion[i] = def.Features.ExtrudeFeatures.Add(extrusion_def);
}
// do rectangular patterns
for (i = 0; i < total_operations; i++)
{
// now repeat that extrusion
ObjectCollection col = m_inventorApplication.TransientObjects.CreateObjectCollection();
col.Add(extrusion[i]);
// TODO: is ceil() actually correct here?
string offset = (m_dialog.offset.Checked ? "1" : "0");
string count_expr = string.Format("ceil(round({0} / {1} - {2}) / 2)", total_length_constr[i].Parameter.Name, tab_length_constr[i].Parameter.Name, offset);
RectangularPatternFeatureDefinition pattern_def =
def.Features.RectangularPatternFeatures.CreateDefinition(
col, extrusion_dir[i], long_edge_dir[i], count_expr, tab_length_constr[i].Parameter.Name + "*2");
// TODO: we could use PatternSpacingType kFitToPathLength here...
try
{
rect_pattern[i] =
def.Features.RectangularPatternFeatures.AddByDefinition(pattern_def);
}
catch (Exception ex)
{
Debug.Print("rect pattern failed: {0}", ex.Message);
Debug.Print("long edge: {0}, dir: {1}, count_expr = '{2}', len = '{3}'", extrusion_dir[i], long_edge_dir[i], count_expr, tab_length_constr[i].Parameter.Name + "*2");
transaction.End();
return;
}
}
stop_selection();
// create custom feature (called a ClientFeature by Inventor) containing all our sketches, extrusions and patterns in a single node
object start_element;
if (total_operations == 1)
{
// if there is only a single operation, the tree looks like this:
/*
* - extrusion 1 (consumed sketch 1)
* - pattern 1
*/
start_element = extrusion[0];
}
else
{
// if there are multiple operations, the sketch is not consumed by the extrusion
// and the tree looks like this:
/*
* - sketch 1
* - sketch 2
* - extrusion 1
* - extrusion 2
* - pattern 1
* - pattern 2
*/
start_element = all_sketches[0];
}
ClientFeatureDefinition feature_def = def.Features.ClientFeatures.CreateDefinition("LaserTab", start_element, rect_pattern[total_operations - 1]);
ClientFeature feature = def.Features.ClientFeatures.Add(feature_def, "{0defbf22-e302-4266-9bc9-fb80d5c8eb7e}");
// load the icon for our custom feature if not done so already
if (m_browser_icon == null)
{
stdole.IPictureDisp icon = PictureConverter.ImageToPictureDisp(Properties.Resources.browser_icon_16);
m_browser_icon = document.BrowserPanes.ClientNodeResources.Add("{0defbf22-e302-4266-9bc9-fb80d5c8eb7e}", -1, icon);
}
NativeBrowserNodeDefinition ndef = document.BrowserPanes[1].GetBrowserNodeFromObject(feature).BrowserNodeDefinition as NativeBrowserNodeDefinition;
ndef.OverrideIcon = m_browser_icon;
transaction.End();
}
