public void TestSeekSwap()
{
CStreamWriter writer = new CStreamWriter();
writer.Write(LongData);
CStreamReader reader = writer.CreateReader();
byte[] buf = new byte[1024];
// seek 5 bytes before EOF
reader.Seek(LongData.Length - 5, SeekOrigin.Begin);
// write more, ensure swap
writer.Write(LongData);
writer.Write(LongData);
Assert.IsTrue(writer.IsSwapped);
{ // seek somewhere to the middle, read
reader.Seek(LongData.Length * 2, SeekOrigin.Begin);
int read = reader.Read(buf);
Assert.AreEqual(buf.Length, read);
}
{ // seek beyond length, assert still open, get EOF
reader.Seek(LongData.Length * 3, SeekOrigin.Current);
Assert.IsFalse(writer.IsClosed);
int read = reader.Read(buf);
Assert.AreEqual(0, read);
}
}
public void TestSwapWithReader()
{
CStreamWriter writer = new CStreamWriter();
CStreamReader reader = writer.CreateReader();
// write, not swapped
writer.Write(LongData);
Assert.IsFalse(writer.IsSwapped);
// read a few bytes, but there are still a few bytes left
byte[] buf = new byte[ShortData.Length];
reader.Read(buf);
Assert.IsTrue(reader.Position > 0);
Assert.IsTrue(reader.Length > reader.Position);
// fill buffer, assert swap
writer.Write(LongData);
writer.Write(LongData);
Assert.IsTrue(writer.IsSwapped);
Assert.IsTrue(reader.IsSwapped);
// try to read more than available, receive less
buf = new byte[writer.Length * 2];
int read = reader.Read(buf);
Assert.IsTrue(read < buf.Length);
// close writer, assert EOF
writer.Close();
int result = reader.ReadByte();
Assert.AreEqual(-1, result);
}
public void Execute()
{
if (InputStreamOne == null || InputStreamTwo == null)
{
return;
}
using (CStreamReader reader1 = InputStreamOne.CreateReader(), reader2 = InputStreamTwo.CreateReader())
{
outputStreamWriter = new CStreamWriter();
EventsHelper.PropertyChanged(PropertyChanged, this, "OutputStream");
int bytesRead;
byte[] buffer = new byte[1024];
// Input One
while ((bytesRead = reader1.Read(buffer)) > 0)
{
outputStreamWriter.Write(buffer, 0, bytesRead);
}
// Input Two
while ((bytesRead = reader2.Read(buffer)) > 0)
{
outputStreamWriter.Write(buffer, 0, bytesRead);
}
outputStreamWriter.Close();
}
}
public void TestDestructorWithReader()
{
CStreamWriter writer = new CStreamWriter();
// write, not swapped
writer.Write(LongData);
// read something and assert there's more
CStreamReader reader = writer.CreateReader();
byte[] buf = new byte[ShortData.Length];
reader.Read(buf);
Assert.IsTrue(reader.Position > 0);
Assert.IsTrue(reader.Length > reader.Position);
Assert.IsFalse(reader.IsSwapped);
// write more, assert swap
writer.Write(LongData);
writer.Write(LongData);
Assert.IsTrue(reader.IsSwapped);
string filePath = writer.FilePath;
// destroy ref to writer
writer.Close();
writer = null;
GC.Collect();
GC.WaitForPendingFinalizers();
Assert.IsNull(writer);
// assert reading still works
Assert.IsTrue(File.Exists(filePath));
Assert.IsNotNull(reader);
int sum = 0;
while (sum < LongData.Length * 2)
{
int read = reader.Read(buf);
Assert.IsTrue(read > 0);
sum += read;
}
// destroy reader
reader = null;
GC.Collect();
GC.WaitForPendingFinalizers();
// deleted tempfile
Assert.IsFalse(File.Exists(filePath));
}
public void TestExhaustiveRead()
{
CStreamWriter writer = new CStreamWriter();
writer.Write(LongData);
writer.Write(LongData);
writer.Write(LongData);
writer.Close();
CStreamReader reader = writer.CreateReader();
byte[] bigbuf = reader.ReadFully();
Assert.AreEqual(LongData.Length * 3, bigbuf.Length);
}
public void TestSeek()
{
CStreamWriter writer = new CStreamWriter();
writer.Write(LongData);
writer.Close();
CStreamReader reader = writer.CreateReader();
byte[] buf = new byte[1024];
{ // seek 5 bytes before EOF, attempt to read much, get 5 bytes
reader.Seek(LongData.Length - 5, SeekOrigin.Begin);
int read = reader.Read(buf, 0, int.MaxValue);
Assert.AreEqual(5, read);
}
{ // read EOF
int read = reader.Read(buf, 0, int.MaxValue);
Assert.AreEqual(0, read);
}
{ // seek beyond stream length, read EOF
reader.Seek(LongData.Length * 3, SeekOrigin.Begin);
int read = reader.Read(buf, 0, int.MaxValue);
Assert.AreEqual(0, read);
}
{ // seek back, read again
reader.Seek(LongData.Length - 5, SeekOrigin.Begin);
int read = reader.Read(buf, 0, int.MaxValue);
Assert.AreEqual(5, read);
}
}
public void TestReader()
{
CStreamWriter writer = new CStreamWriter();
// put 6 bytes
writer.Write(ShortData);
CStreamReader reader = writer.CreateReader();
// length==6, position==0
Assert.AreEqual(0, reader.Position);
Assert.AreEqual(ShortData.Length, reader.Length);
// try to read more bytes than available
byte[] buf = new byte[ShortData.Length * 1000];
Assert.AreNotEqual(buf.Length, ShortData.Length);
Assert.IsFalse(buf.SequenceEqual(ShortData));
int read = reader.Read(buf);
Assert.AreEqual(ShortData.Length, read);
// assert the first few bytes are still correct
byte[] buf2 = new byte[ShortData.Length];
Array.Copy(buf, buf2, buf2.Length);
Assert.IsTrue(buf2.SequenceEqual(ShortData));
// not swapped
Assert.IsFalse(reader.IsSwapped);
}
void OnPacketArrival(object sender, CaptureEventArgs e)
{
GuiLogMessage("Packet: " + e.ToString(), NotificationLevel.Debug);
if (writer != null && !writer.IsClosed)
{
writer.Write(e.Packet.Data);
}
this.DataPacket = e.Packet.Data;
OnPropertyChanged("DataPacket");
}
public void TestDestructor()
{
CStreamWriter writer = new CStreamWriter();
Assert.IsFalse(writer.IsSwapped);
writer.Write(LongData);
Assert.IsFalse(writer.IsSwapped);
writer.Write(LongData);
Assert.IsTrue(writer.IsSwapped);
string filePath = writer.FilePath;
Assert.IsTrue(File.Exists(filePath));
// force GC
writer = null;
GC.Collect();
GC.WaitForPendingFinalizers();
// tempfile deleted
Assert.IsFalse(File.Exists(filePath));
}
public void TestWriter()
{
CStreamWriter writer = new CStreamWriter();
// put 6 bytes
writer.Write(ShortData);
// length == position == 6
Assert.AreEqual(ShortData.Length, writer.Length);
Assert.AreEqual(ShortData.Length, writer.Position);
// not swapped
Assert.IsFalse(writer.IsSwapped);
}
public void Execute()
{
if (amountOfNumbers <= 0)
{
GuiLogMessage("Negative amount of numbers cant be generated", NotificationLevel.Warning);
ProgressChanged(1, 1);
return;
}
if (hasSeed)
{
setSeed(seed);
}
ProgressChanged(0, 1);
CStreamWriter writer = new CStreamWriter();
data = writer;
uint current;
byte[] nextData;
outputNumbers = new BigInteger[amountOfNumbers];
for (int i = 0; i < amountOfNumbers; i++)
{
// nothing to say here, it is simple writing the necessary amount of uints onto the stream
current = getNextUInt();
outputNumbers[i] = current;
nextData = BitConverter.GetBytes(current);
if (littleEndian)
{
Array.Reverse(nextData);
}
writer.Write(nextData);
ProgressChanged(i, amountOfNumbers);
}
writer.Close();
OnPropertyChanged("OutputData");
OnPropertyChanged("OutputNumbers");
GuiLogMessage("Generation finished", NotificationLevel.Debug);
ProgressChanged(1, 1);
}
private void UpdateOutputs(byte[] data, int connectionID)
{
using (var streamWriter = new CStreamWriter())
{
PackageStream = streamWriter;
streamWriter.Write(data);
streamWriter.Close();
}
OnPropertyChanged("PackageStream");
if (returnLastPackage) //change single output if no item is selected
{
SingleOutput = data;
OnPropertyChanged("SingleOutput");
}
ConnectionIDOutput = connectionID;
OnPropertyChanged("ConnectionIDOutput");
}
public void TestSwap()
{
CStreamWriter writer = new CStreamWriter();
// fill buffer with Length-1 bytes
writer.Write(LongData);
Assert.AreEqual(LongData.Length, writer.Position);
Assert.IsFalse(writer.IsSwapped);
// fill last byte
writer.WriteByte(5);
Assert.AreEqual(LongData.Length + 1, writer.Position);
Assert.IsFalse(writer.IsSwapped);
// write one byte more, assert swap
writer.WriteByte(10);
Assert.AreEqual(LongData.Length + 2, writer.Position);
Assert.IsTrue(writer.IsSwapped);
}
private void ReadProcessOutput(object sendingProcess, DataReceivedEventArgs data)
{
//Debug.WriteLine("ReadProcessOutput event fired at {0}", System.DateTime.UtcNow);
switch (settings.SatString)
{
case SATSolverSettings.Solver.MiniSAT:
{
if (!(data.Data == null))
{
string str = data.Data.ToString();
if (str.Contains("WARNING!"))
{
GuiLogMessage(data.Data.ToString(), NotificationLevel.Warning);
}
else
{
if (str.Contains("Parse time"))
{
ProgressChanged(5, 100);
}
else if (str.Contains("Simplification time"))
{
ProgressChanged(10, 100);
}
else if (str.Contains("restarts"))
{
ProgressChanged(99, 100);
}
outputConsoleString.AppendLine(data.Data.ToString());
outputConsoleStream = new CStreamWriter();
outputConsoleStream.Write(encoding.GetBytes(outputConsoleString.ToString()));
outputConsoleStream.Close();
OnPropertyChanged("OutputConsoleStream");
}
}
break;
}
default: break;
}
}
void exitcodeHandling(int exitcode)
{
switch (settings.SatString)
{
case SATSolverSettings.Solver.MiniSAT:
{
switch (exitcode)
{
case 1:
{
GuiLogMessage("ERROR: Could not open file", NotificationLevel.Error);
break;
}
case 2:
{
GuiLogMessage("INTERRUPTED", NotificationLevel.Info);
break;
}
case 3:
{
GuiLogMessage("PARSE ERROR: Unexpected char in cnf (Maybe a clause is not terminated by '0'?)", NotificationLevel.Error);
break;
}
case 4:
{
GuiLogMessage("INDETERMINATE ERROR! (Maybe out of memory?)", NotificationLevel.Error);
break;
}
case 5:
{
GuiLogMessage("ERROR: Invalid Option", NotificationLevel.Error);
break;
}
case 10: goto case 20; // case 10: UNSAT, case 20: SAT
case 20:
{
string line;
//while ((line = reader.ReadLine()) != null)
//{
// line += "\n";
// outputConsoleStream.Write(encoding.GetBytes(line));
//}
//reader.Close();
using (reader = new StreamReader(outputResultFilename))
{
while ((line = reader.ReadLine()) != null)
{
line += "\n";
outputResultStream.Write(encoding.GetBytes(line));
}
}
break;
}
//case 30: // print usage help
// {
// string line;
// while ((line = errorReader.ReadLine()) != null)
// {
// line += "\n";
// outputConsoleStream.Write(encoding.GetBytes(line));
// }
// errorReader.Close();
// break;
// }
case 40: goto case 20; // print dimacs (output preprocessed cnf)
default:
{
GuiLogMessage("Exitcode " + exitcode, NotificationLevel.Debug);
break;
}
}
break;
}
default: break;
}
}
private void Crypt()
{
try
{
ICryptoTransform p_encryptor;
SymmetricAlgorithm p_alg = TwofishManaged.Create();
ConfigureAlg(p_alg);
outputStreamWriter = new CStreamWriter();
ICryptoolStream inputdata = InputStream;
if (settings.Action == 0)
{
inputdata = BlockCipherHelper.AppendPadding(InputStream, settings.padmap[settings.Padding], p_alg.BlockSize / 8);
}
CStreamReader reader = inputdata.CreateReader();
byte[] tmpInput = BlockCipherHelper.StreamToByteArray(inputdata);
byte[] outputData = new byte[tmpInput.Length];
byte[] IV = new byte[p_alg.IV.Length];
Array.Copy(p_alg.IV, IV, p_alg.IV.Length);
int bs = p_alg.BlockSize >> 3;
if (settings.Mode == 0) // ECB
{
p_encryptor = (settings.Action == 0) ? p_alg.CreateEncryptor(p_alg.Key, p_alg.IV) : p_alg.CreateDecryptor(p_alg.Key, p_alg.IV);
for (int pos = 0; pos < tmpInput.Length; pos += bs)
{
p_encryptor.TransformBlock(tmpInput, pos, bs, outputData, pos);
}
}
else if (settings.Mode == 1) // CBC
{
if (settings.Action == 0)
{
p_encryptor = p_alg.CreateEncryptor(p_alg.Key, p_alg.IV);
for (int pos = 0; pos < tmpInput.Length; pos += bs)
{
for (int i = 0; i < bs; i++)
{
tmpInput[pos + i] ^= IV[i];
}
p_encryptor.TransformBlock(tmpInput, pos, bs, outputData, pos);
for (int i = 0; i < bs; i++)
{
IV[i] = outputData[pos + i];
}
}
}
else
{
p_encryptor = p_alg.CreateDecryptor(p_alg.Key, p_alg.IV);
for (int pos = 0; pos < tmpInput.Length; pos += bs)
{
p_encryptor.TransformBlock(tmpInput, pos, bs, outputData, pos);
for (int i = 0; i < bs; i++)
{
outputData[pos + i] ^= IV[i];
IV[i] = tmpInput[pos + i];
}
}
}
}
else if (settings.Mode == 2) // CFB
{
p_encryptor = p_alg.CreateEncryptor(p_alg.Key, p_alg.IV);
if (settings.Action == 0)
{
for (int pos = 0; pos < tmpInput.Length; pos += bs)
{
p_encryptor.TransformBlock(IV, 0, p_encryptor.InputBlockSize, outputData, pos);
for (int i = 0; i < bs; i++)
{
outputData[pos + i] ^= tmpInput[pos + i];
IV[i] = outputData[pos + i];
}
}
}
else
{
for (int pos = 0; pos < tmpInput.Length; pos += bs)
{
p_encryptor.TransformBlock(IV, 0, p_encryptor.InputBlockSize, outputData, pos);
for (int i = 0; i < bs; i++)
{
IV[i] = tmpInput[pos + i];
outputData[pos + i] ^= tmpInput[pos + i];
}
}
}
}
else if (settings.Mode == 3) // OFB
{
p_encryptor = p_alg.CreateEncryptor(p_alg.Key, p_alg.IV);
for (int pos = 0; pos < tmpInput.Length; pos += bs)
{
p_encryptor.TransformBlock(IV, 0, p_encryptor.InputBlockSize, outputData, pos);
for (int i = 0; i < bs; i++)
{
IV[i] = outputData[pos + i];
outputData[pos + i] ^= tmpInput[pos + i];
}
}
}
outputStreamWriter.Write(outputData);
//if( p_encryptor!=null ) p_encryptor.Dispose();
outputStreamWriter.Close();
if (settings.Action == 1)
{
outputStreamWriter = BlockCipherHelper.StripPadding(outputStreamWriter, settings.padmap[settings.Padding], p_alg.BlockSize / 8) as CStreamWriter;
}
OnPropertyChanged("OutputStream");
}
catch (CryptographicException cryptographicException)
{
// TODO: For an unknown reason p_crypto_stream can not be closed after exception.
// Trying so makes p_crypto_stream throw the same exception again. So in Dispose
// the error messages will be doubled.
// As a workaround we set p_crypto_stream to null here.
p_crypto_stream = null;
GuiLogMessage(cryptographicException.Message, NotificationLevel.Error);
}
catch (Exception exception)
{
GuiLogMessage(exception.Message, NotificationLevel.Error);
}
}
public void Execute()
{
if (inputStream == null || inputStream.Length == 0)
{
return;
}
try
{
internalInputByteList = new List <byte[]>();
using (CStreamReader reader = inputStream.CreateReader())
{
reader.WaitEof(); // does not support chunked streaming
/// Checks if the input stream contains a valid value. If not, class waits for input AND DOES NOTHING.
/// XXX: Execute() does not stop. Bug?
loadList(reader);
//GuiLogMessage("Ich habe jetzt " + internalInputByteList.Count + " Pakete....", NotificationLevel.Warning);
// Is there a key? - If yes, go on. If no: Give out a warning!
switch (checkForValidKey())
{
// Key is valid, so do nothing.
case 0:
break;
// Key is null reference or of length 0
case 1:
// Warning to the outside world and exit.
GuiLogMessage("WARNING - No key provided. Aborting now.", NotificationLevel.Error);
return;
// Key is of wrong size. Warning and create a dummey key.
case 2:
GuiLogMessage("WARNING -- wrong key size. Must be 5 or 13 bytes.", NotificationLevel.Error);
return;
default:
break;
}
outputStreamWriter = new CStreamWriter();
outputStreamWriter.Write(header, 0, header.Length);
key = new byte[inputByteKey.Length + 3];
for (int i = 0; i < inputByteKey.Length; i++)
{
key[i + 3] = inputByteKey[i];
}
counter = 0;
byte[] packetIndividualHeader = new byte[16];
packetIndividualHeader[0] = 0x0D;
packetIndividualHeader[1] = 0x12;
packetIndividualHeader[2] = 0xC9;
packetIndividualHeader[3] = 0x48;
packetIndividualHeader[4] = 0x78;
packetIndividualHeader[5] = 0x70;
packetIndividualHeader[6] = 0x01;
packetIndividualHeader[7] = 0x00;
// size of sniffed packet, used for looking in packet with Wireshark
packetIndividualHeader[8] = 0x00;
packetIndividualHeader[9] = 0x00;
packetIndividualHeader[10] = 0x00;
packetIndividualHeader[11] = 0x00;
// size
packetIndividualHeader[12] = 0x00;
packetIndividualHeader[13] = 0x00;
packetIndividualHeader[14] = 0x00;
packetIndividualHeader[15] = 0x00;
DateTime startTime = DateTime.Now;
for (int j = 0; j < internalInputByteList.Count; j++)
{
if (stop)
{
break;
}
byte[] tempInputByte = internalInputByteList.ElementAt(j);
lengthOfInputByte = tempInputByte.Length;
lengthOfOutputByte = lengthOfInputByte;
// Dependeing on action, there are some modifications to the packet necessary. That's done here.
switch (settings.Action)
{
case 0:
tempInputByte = concatenateTwoArrays(createLLCAndSNAPHeader(), tempInputByte);
lengthOfInputByte = lengthOfOutputByte = tempInputByte.Length;
crc32 = new CRC32();
byte[] icv = crc32.ComputeHash(tempInputByte);
lengthOfInputByte += 4;
lengthOfOutputByte += 4;
Array.Resize(ref tempInputByte, lengthOfInputByte);
tempInputByte[lengthOfInputByte - 4] = icv[0];
tempInputByte[lengthOfInputByte - 3] = icv[1];
tempInputByte[lengthOfInputByte - 2] = icv[2];
tempInputByte[lengthOfInputByte - 1] = icv[3];
byte[] size = get4BytesFromInt(lengthOfInputByte + 28);
packetIndividualHeader[8] = size[0];
packetIndividualHeader[9] = size[1];
packetIndividualHeader[10] = size[2];
packetIndividualHeader[11] = size[3];
packetIndividualHeader[12] = size[0];
packetIndividualHeader[13] = size[1];
packetIndividualHeader[14] = size[2];
packetIndividualHeader[15] = size[3];
//permutation = new byte[256];
getInitialisationVector();
//outputByte = new byte[lengthOfOutputByte];
key[0] = iV[0];
key[1] = iV[1];
key[2] = iV[2];
outputByte = RC4.rc4encrypt(tempInputByte, key);
// Key index
outputByte = concatenateTwoArrays(new byte[] { 0x00 }, outputByte);
// initialisation vector
outputByte = concatenateTwoArrays(iV, outputByte);
// sequence controll
outputByte = concatenateTwoArrays(new byte[] { 0xA5 }, outputByte);
// Frame number
outputByte = concatenateTwoArrays(new byte[] { 0xC0 }, outputByte);
// MAC address destination
outputByte = concatenateTwoArrays(new byte[] { 0x00, 0x12, 0xBF, 0xDC, 0x4E, 0x7A }, outputByte);
// MAC address source
outputByte = concatenateTwoArrays(new byte[] { 0x00, 0xA0, 0xD1, 0x25, 0xB9, 0xEC }, outputByte);
// BSS ID
outputByte = concatenateTwoArrays(new byte[] { 0x00, 0x12, 0xBF, 0xDC, 0x4E, 0x7C }, outputByte);
// IEEE 802.11 header
outputByte = concatenateTwoArrays(new byte[] { 0x08, 0x41, 0x75, 0x00 }, outputByte);
// packet individual header, size and some other information
outputByte = concatenateTwoArrays(packetIndividualHeader, outputByte);
//outputByteList.Add(outputByte);
outputStreamWriter.Write(outputByte, 0, outputByte.Length);
crc32 = null;
icv = null;
size = null;
//permutation = null;
tempInputByte = null;
outputByte = null;
break;
case 1:
byte[] pIH = providePacketIndividualHeader(tempInputByte);
tempInputByte = removePacketIndividualHeader(tempInputByte);
byte[] iEEEHeaderInformation = provideFirst28Bytes(tempInputByte);
tempInputByte = removeFirst28Bytes(tempInputByte);
key[0] = iEEEHeaderInformation[24];
key[1] = iEEEHeaderInformation[25];
key[2] = iEEEHeaderInformation[26];
iEEEHeaderInformation = removeWEPParameters(iEEEHeaderInformation);
lengthOfInputByte = lengthOfOutputByte = tempInputByte.Length;
// new packet size = packetsize + 28 (=IEEE header) - WEP parameters (IV & key index, 4 bytes) - ICV (4 bytes)
byte[] sizeCase1 = get4BytesFromInt(lengthOfOutputByte + 20);
pIH[8] = sizeCase1[0];
pIH[9] = sizeCase1[1];
pIH[10] = sizeCase1[2];
pIH[11] = sizeCase1[3];
pIH[12] = sizeCase1[0];
pIH[13] = sizeCase1[1];
pIH[14] = sizeCase1[2];
pIH[15] = sizeCase1[3];
outputByte = RC4.rc4encrypt(tempInputByte, key);
outputByte = removeICV(tempInputByte);
// IEEE header and output byte are concatenated
outputByte = concatenateTwoArrays(iEEEHeaderInformation, outputByte);
// packet individual header, size and some other information
outputByte = concatenateTwoArrays(pIH, outputByte);
//outputByteList.Add(outputByte);
outputStreamWriter.Write(outputByte, 0, outputByte.Length);
outputByte = null;
pIH = null;
iEEEHeaderInformation = null;
size = null;
break;
default:
break;
}
counter++;
if (this.internalInputByteList != null)
{
ProgressChanged(counter, internalInputByteList.Count);
}
tempInputByte = null;
}
DateTime stopTime = DateTime.Now;
TimeSpan duration = stopTime - startTime;
if (!stop)
{
if (settings.Action == 0)
{
GuiLogMessage("Encryption complete!", NotificationLevel.Info);
}
if (settings.Action == 1)
{
GuiLogMessage("Decryption complete!", NotificationLevel.Info);
}
if (counter == 1)
{
GuiLogMessage("Time used [h:min:sec]: " + duration.ToString(), NotificationLevel.Info);
}
else
{
GuiLogMessage("Time used [h:min:sec]: " + duration.ToString() + " for " + counter.ToString("#,#", CultureInfo.InstalledUICulture) + " packets.", NotificationLevel.Info);
}
outputStreamWriter.Close();
OnPropertyChanged("OutputStream");
}
if (stop)
{
outputStreamWriter.Close();
GuiLogMessage("Aborted!", NotificationLevel.Info);
}
internalInputByteList.Clear();
internalInputByteList = null;
key = null;
}
}
catch (Exception exc)
{
GuiLogMessage(exc.Message.ToString(), NotificationLevel.Error);
}
finally
{
ProgressChanged(1.0, 1.0);
}
}
public void Execute()
{
/* do not execute if checks in PreExecution() failed */
if (!execute)
{
return;
}
ProgressChanged(0, 1);
byte[] input, output;
int outputLength, rate, capacity;
/* setup output stream writer */
CStreamWriter OutputStreamwriter = new CStreamWriter();
OutputStream = OutputStreamwriter;
OnPropertyChanged("OutputStream");
#if _DEBUG_
/* setup debug stream writer */
TextWriter consoleOut = Console.Out; // save the standard output
CStreamWriter debugStream = new CStreamWriter();
StreamWriter debugStreamWriter = new StreamWriter(debugStream);
debugStreamWriter.AutoFlush = true; // flush stream every time WriteLine is called
Console.SetOut(debugStreamWriter);
DebugStream = debugStream;
OnPropertyChanged("DebugStream");
#endif
#region get input
/* read input */
using (CStreamReader reader = InputStream.CreateReader())
{
int bytesRead;
byte[] buffer = new byte[128]; // buffer of length 128 byte
MemoryStream stream = new MemoryStream();
BinaryWriter bw = new BinaryWriter(stream);
while ((bytesRead = reader.Read(buffer)) > 0)
{
bw.Write(buffer, 0, bytesRead);
}
bw.Close();
input = stream.ToArray();
OnPropertyChanged("OutputStream");
}
#endregion
outputLength = settings.OutputLength;
rate = settings.Rate;
capacity = settings.Capacity;
/* show presentation intro */
#region presentation intro
if (pres.IsVisible)
{
/* clean up last round */
pres.Dispatcher.Invoke(DispatcherPriority.Normal, (SendOrPostCallback) delegate
{
pres.absorbGrid.Visibility = Visibility.Hidden;
pres.imgBlankPage.Visibility = Visibility.Hidden;
pres.labelOutput.Visibility = Visibility.Hidden;
pres.textBlockStateBeforeAbsorb.Text = "";
pres.textBlockBlockToAbsorb.Text = "";
pres.textBlockStateAfterAbsorb.Text = "";
pres.labelCurrentPhase.Content = "";
pres.labelCurrentStep.Content = "";
pres.textBlockExplanation.Text = "";
pres.textBlockParametersNotSupported.Visibility = Visibility.Hidden;
pres.textBlockParametersNotSupported.Text = "";
pres.textBlockStepPresentationNotAvailable.Visibility = Visibility.Hidden;
pres.textBlockStepPresentationNotAvailable.Text = "";
pres.buttonNext.IsEnabled = true;
pres.buttonSkip.IsEnabled = false;
pres.buttonAutostep.IsEnabled = false;
pres.buttonSkipPermutation.IsEnabled = false;
pres.autostepSpeedSlider.IsEnabled = false;
pres.spButtons.Visibility = Visibility.Visible;
pres.buttonSkipIntro.Visibility = Visibility.Visible;
pres.imgIntroFirstPage.Visibility = Visibility.Visible;
}, null);
AutoResetEvent buttonNextClickedEvent = pres.buttonNextClickedEvent;
#region check if selected parameters are supported
if (outputLength > rate)
{
pres.skipPresentation = true;
pres.Dispatcher.Invoke(DispatcherPriority.Normal, (SendOrPostCallback) delegate
{
pres.imgIntroFirstPage.Visibility = Visibility.Hidden;
pres.textBlockParametersNotSupported.Text = Resources.PresOutputLengthError;
pres.textBlockParametersNotSupported.Visibility = Visibility.Visible;
}, null);
}
else if (rate + capacity < 200)
{
pres.skipPresentation = true;
pres.Dispatcher.Invoke(DispatcherPriority.Normal, (SendOrPostCallback) delegate
{
pres.imgIntroFirstPage.Visibility = Visibility.Hidden;
pres.textBlockParametersNotSupported.Text = Resources.PresStateSizeError;
pres.textBlockParametersNotSupported.Visibility = Visibility.Visible;
}, null);
}
#endregion
if (!pres.skipPresentation)
{
buttonNextClickedEvent.WaitOne();
}
if (!pres.skipPresentation && !pres.skipIntro)
{
pres.Dispatcher.Invoke(DispatcherPriority.Normal, (SendOrPostCallback) delegate
{
pres.imgIntroFirstPage.Visibility = Visibility.Hidden;
pres.labelIntroIntroduction.Visibility = Visibility.Visible;
}, null);
buttonNextClickedEvent = pres.buttonNextClickedEvent;
buttonNextClickedEvent.WaitOne();
}
if (!pres.skipPresentation && !pres.skipIntro)
{
pres.Dispatcher.Invoke(DispatcherPriority.Normal, (SendOrPostCallback) delegate
{
pres.labelCurrentPhase.Content = Resources.PresIntroduction;
pres.labelCurrentStep.Content = Resources.PresInitialization;
pres.textBlockIntroduction.Text = string.Format(Resources.PresInitializationText, (rate + capacity), capacity, rate);
pres.labelIntroIntroduction.Visibility = Visibility.Hidden;
pres.imgIntroSpongeInit.Visibility = Visibility.Visible;
}, null);
buttonNextClickedEvent = pres.buttonNextClickedEvent;
buttonNextClickedEvent.WaitOne();
}
if (!pres.skipPresentation && !pres.skipIntro)
{
pres.Dispatcher.Invoke(DispatcherPriority.Normal, (SendOrPostCallback) delegate
{
pres.labelCurrentStep.Content = Resources.PresAbsorbingPhase;
pres.textBlockIntroduction.Text =
string.Format(Resources.PresAbsorbingPhaseText, rate);
pres.imgIntroSpongeInit.Visibility = Visibility.Hidden;
pres.imgIntroSpongeAbsorb.Visibility = Visibility.Visible;
}, null);
buttonNextClickedEvent = pres.buttonNextClickedEvent;
buttonNextClickedEvent.WaitOne();
}
if (!pres.skipPresentation && !pres.skipIntro)
{
pres.Dispatcher.Invoke(DispatcherPriority.Normal, (SendOrPostCallback) delegate
{
pres.labelCurrentStep.Content = Resources.PresSqueezingPhase;
pres.textBlockIntroduction.Text = Resources.PresSqueezingPhaseText;
pres.imgIntroSpongeAbsorb.Visibility = Visibility.Hidden;
pres.imgIntroSpongeSqueeze.Visibility = Visibility.Visible;
}, null);
buttonNextClickedEvent = pres.buttonNextClickedEvent;
buttonNextClickedEvent.WaitOne();
}
if (!pres.skipPresentation && !pres.skipIntro)
{
/* calculate l parameter */
int l = (int)Math.Log((double)((rate + capacity) / 25), 2);
pres.Dispatcher.Invoke(DispatcherPriority.Normal, (SendOrPostCallback) delegate
{
pres.labelCurrentStep.Content = Resources.PresKeccakFPhase;
pres.textBlockIntroduction.Text = string.Format(Resources.PresKeccakFPhaseText, l, (12 + 2 * l));
pres.labelIntroIterationAmount.Content = string.Format(Resources.PresKeccakFIterations, (12 + 2 * l));
pres.imgIntroSpongeSqueeze.Visibility = Visibility.Hidden;
pres.imgIntroSpongeKeccakf2.Visibility = Visibility.Visible;
}, null);
buttonNextClickedEvent = pres.buttonNextClickedEvent;
buttonNextClickedEvent.WaitOne();
}
if (!pres.skipPresentation && !pres.skipIntro)
{
pres.Dispatcher.Invoke(DispatcherPriority.Normal, (SendOrPostCallback) delegate
{
pres.labelIntroIterationAmount.Content = "";
pres.imgIntroSpongeKeccakf2.Visibility = Visibility.Hidden;
pres.imgIntroStateMapping.Visibility = Visibility.Visible;
pres.textBlockIntroduction.Text = string.Format(Resources.PresKeccakFStateMapping, (capacity + rate), (capacity + rate) / 25);
}, null);
buttonNextClickedEvent = pres.buttonNextClickedEvent;
buttonNextClickedEvent.WaitOne();
}
if (!pres.skipPresentation && !pres.skipIntro)
{
pres.Dispatcher.Invoke(DispatcherPriority.Normal, (SendOrPostCallback) delegate
{
pres.buttonSkipIntro.Visibility = Visibility.Hidden;
pres.imgIntroStateMapping.Visibility = Visibility.Hidden;
pres.labelIntroExecution.Visibility = Visibility.Visible;
pres.textBlockIntroduction.Text = "";
pres.labelCurrentPhase.Content = "";
pres.labelCurrentStep.Content = "";
}, null);
buttonNextClickedEvent = pres.buttonNextClickedEvent;
buttonNextClickedEvent.WaitOne();
}
if (!pres.skipPresentation && !pres.skipIntro)
{
pres.Dispatcher.Invoke(DispatcherPriority.Normal, (SendOrPostCallback) delegate
{
pres.labelIntroExecution.Visibility = Visibility.Hidden;
}, null);
}
if (pres.skipPresentation || pres.skipIntro)
{
pres.Dispatcher.Invoke(DispatcherPriority.Normal, (SendOrPostCallback) delegate
{
pres.labelIntroIterationAmount.Content = "";
pres.imgIntroFirstPage.Visibility = Visibility.Hidden;
pres.imgIntroIntroduction.Visibility = Visibility.Hidden;
pres.imgIntroSpongeInit.Visibility = Visibility.Hidden;
pres.imgIntroSpongeAbsorb.Visibility = Visibility.Hidden;
pres.imgIntroSpongeSqueeze.Visibility = Visibility.Hidden;
pres.imgIntroSpongeKeccakf2.Visibility = Visibility.Hidden;
pres.imgIntroStateMapping.Visibility = Visibility.Hidden;
pres.imgIntroExecution.Visibility = Visibility.Hidden;
pres.buttonSkipIntro.Visibility = Visibility.Hidden;
pres.labelIntroIntroduction.Visibility = Visibility.Hidden;
pres.labelIntroExecution.Visibility = Visibility.Hidden;
pres.textBlockIntroduction.Text = "";
}, null);
}
}
#endregion
/* hash input */
output = KeccakHashFunction.Hash(input, outputLength, rate, capacity, ref pres, this);
/* write output */
OutputStreamwriter.Write(output);
OutputStreamwriter.Close();
#if _DEBUG_
/* close debug stream and reset standard output */
debugStreamWriter.Close();
Console.SetOut(consoleOut);
#endif
/* hide button panel */
if (pres.IsVisible)
{
pres.Dispatcher.Invoke(DispatcherPriority.Normal, (SendOrPostCallback) delegate
{
pres.spButtons.Visibility = Visibility.Hidden;
}, null);
}
ProgressChanged(1, 1);
}
private void process(int action, int padding)
{
//Encrypt/Decrypt Stream
try
{
if (InputStream == null || InputStream.Length == 0)
{
GuiLogMessage("No input data, aborting now", NotificationLevel.Error);
return;
}
byte[] inputbuffer = new byte[8];
byte[] outputbuffer = new byte[8];
uint[] key = new uint[4];
long[] longKey = new long[4];
long keybytes = inputKey.Length;
GuiLogMessage("inputKey length [byte]: " + keybytes.ToString(), NotificationLevel.Debug);
if (keybytes != 16)
{
GuiLogMessage("Given key has false length. Please provide a key with 128 Bits length. Aborting now.", NotificationLevel.Error);
return;
}
if (settings.Version != 2)
{
key[0] = BitConverter.ToUInt32(inputKey, 0);
key[1] = BitConverter.ToUInt32(inputKey, 4);
key[2] = BitConverter.ToUInt32(inputKey, 8);
key[3] = BitConverter.ToUInt32(inputKey, 12);
}
else
{
longKey[0] = (long)BitConverter.ToUInt32(inputKey, 0);
longKey[1] = (long)BitConverter.ToUInt32(inputKey, 4);
longKey[2] = (long)BitConverter.ToUInt32(inputKey, 8);
longKey[3] = (long)BitConverter.ToUInt32(inputKey, 12);
}
//check for a valid IV
if (this.inputIV == null)
{
//create a trivial IV
inputIV = new byte[8];
if (settings.Mode != 0)
{
GuiLogMessage("WARNING - No IV provided. Using 0x000..00!", NotificationLevel.Warning);
}
}
byte[] IV = new byte[8];
Array.Copy(inputIV, IV, Math.Min(inputIV.Length, IV.Length));
DateTime startTime = DateTime.Now;
uint[] vector = new uint[2];
long[] longVector = new long[2];
CryptDelegate crypfunc = delegates[settings.Action * 3 + settings.Version];
StatusChanged((int)teaimages[settings.Action * 3 + settings.Version]);
outputStream = new CStreamWriter();
ICryptoolStream inputdata = InputStream;
if (action == 0)
{
inputdata = BlockCipherHelper.AppendPadding(InputStream, settings.padmap[settings.Padding], 8);
}
CStreamReader reader = inputdata.CreateReader();
GuiLogMessage("Starting " + ((action == 0)?"encryption":"decryption") + " [Keysize=128 Bits, Blocksize=64 Bits]", NotificationLevel.Info);
if (settings.Mode == 0) // ECB
{
while (reader.Read(inputbuffer, 0, inputbuffer.Length) > 0 && !stop)
{
Bytes2Vector(vector, inputbuffer);
crypfunc(settings.Rounds, vector, key);
Vector2Bytes(vector, outputbuffer);
outputStream.Write(outputbuffer);
}
}
else if (settings.Mode == 1) // CBC
{
if (settings.Action == 0)
{
while (reader.Read(inputbuffer, 0, inputbuffer.Length) > 0 && !stop)
{
for (int i = 0; i < 8; i++)
{
inputbuffer[i] ^= IV[i];
}
Bytes2Vector(vector, inputbuffer);
crypfunc(settings.Rounds, vector, key);
Vector2Bytes(vector, outputbuffer);
for (int i = 0; i < 8; i++)
{
IV[i] = outputbuffer[i];
}
outputStream.Write(outputbuffer);
}
}
else
{
while (reader.Read(inputbuffer, 0, inputbuffer.Length) > 0 && !stop)
{
Bytes2Vector(vector, inputbuffer);
crypfunc(settings.Rounds, vector, key);
Vector2Bytes(vector, outputbuffer);
for (int i = 0; i < 8; i++)
{
outputbuffer[i] ^= IV[i];
}
for (int i = 0; i < 8; i++)
{
IV[i] = inputbuffer[i];
}
outputStream.Write(outputbuffer);
}
}
}
else if (settings.Mode == 2) // CFB
{
if (settings.Action == 0)
{
while (reader.Read(inputbuffer, 0, inputbuffer.Length) > 0 && !stop)
{
Bytes2Vector(vector, IV);
crypfunc(settings.Rounds, vector, key);
Vector2Bytes(vector, outputbuffer);
for (int i = 0; i < 8; i++)
{
outputbuffer[i] ^= inputbuffer[i];
}
for (int i = 0; i < 8; i++)
{
IV[i] = outputbuffer[i];
}
outputStream.Write(outputbuffer);
}
}
else
{
crypfunc = delegates[settings.Version]; // choose encrypt function
while (reader.Read(inputbuffer, 0, inputbuffer.Length) > 0 && !stop)
{
Bytes2Vector(vector, IV);
crypfunc(settings.Rounds, vector, key);
Vector2Bytes(vector, outputbuffer);
for (int i = 0; i < 8; i++)
{
outputbuffer[i] ^= inputbuffer[i];
}
for (int i = 0; i < 8; i++)
{
IV[i] = inputbuffer[i];
}
outputStream.Write(outputbuffer);
}
}
}
else if (settings.Mode == 3) // OFB - encrypt = decrypt
{
crypfunc = delegates[settings.Version]; // choose encrypt function
while (reader.Read(inputbuffer, 0, inputbuffer.Length) > 0 && !stop)
{
Bytes2Vector(vector, IV);
crypfunc(settings.Rounds, vector, key);
Vector2Bytes(vector, outputbuffer);
for (int i = 0; i < 8; i++)
{
IV[i] = outputbuffer[i];
}
for (int i = 0; i < 8; i++)
{
outputbuffer[i] ^= inputbuffer[i];
}
outputStream.Write(outputbuffer);
}
}
long outbytes = outputStream.Length;
DateTime stopTime = DateTime.Now;
TimeSpan duration = stopTime - startTime;
outputStream.Close();
if (action == 1)
{
outputStream = BlockCipherHelper.StripPadding(outputStream, settings.padmap[settings.Padding], 8) as CStreamWriter;
}
if (!stop)
{
GuiLogMessage("Time used: " + duration.ToString(), NotificationLevel.Debug);
OnPropertyChanged("OutputStream");
}
else
{
GuiLogMessage("Aborted!", NotificationLevel.Info);
}
}
catch (Exception exception)
{
GuiLogMessage(exception.Message, NotificationLevel.Error);
}
finally
{
ProgressChanged(1, 1);
}
}
/// <summary>
/// Encrypts/Decrypts using OFB
/// </summary>
/// <param name="blockCipher"></param>
/// <param name="cipherAction"></param>
/// <param name="inputStream"></param>
/// <param name="outputStream"></param>
/// <param name="key"></param>
/// <param name="iv"></param>
/// <param name="padding"></param>
/// <param name="stop"></param>
/// <param name="progressChanged"></param>
/// <param name="lastInputBlock"></param>
/// <param name="blocksize"></param>
public static void ExecuteOFB(BlockCipher blockCipher,
CipherAction cipherAction,
ref ICrypToolStream inputStream,
ref ICrypToolStream outputStream,
byte[] key,
byte[] iv,
PaddingType padding,
ref bool stop,
ProgressChanged progressChanged,
ref byte[] lastInputBlock,
int blocksize = 8)
{
using (CStreamReader reader = inputStream.CreateReader())
{
using (CStreamWriter writer = new CStreamWriter())
{
byte[] lastBlock = iv;
int readcount = 0;
while (reader.Position < reader.Length && !stop)
{
//we always try to read a complete block
byte[] inputBlock = new byte[blocksize];
readcount = 0;
while ((readcount += reader.Read(inputBlock, readcount, blocksize - readcount)) < blocksize &&
reader.Position < reader.Length && !stop)
{
;
}
if (stop)
{
return;
}
//Show progress in UI
progressChanged(reader.Position, reader.Length);
byte[] outputblock = null;
//we read a complete block
if (readcount == blocksize)
{
//Compute XOR with lastblock for OFB mode
if (cipherAction == CipherAction.Encrypt)
{
outputblock = blockCipher(lastBlock, key);
lastBlock = outputblock;
outputblock = XOR(outputblock, inputBlock);
}
else
{
outputblock = blockCipher(lastBlock, key);
lastBlock = outputblock;
outputblock = XOR(outputblock, inputBlock);
}
}
//we read an incomplete block, thus, we are at the end of the stream
else if (readcount > 0)
{
//Compute XOR with lastblock for CFB mode
if (cipherAction == CipherAction.Encrypt)
{
byte[] block = new byte[blocksize];
Array.Copy(inputBlock, 0, block, 0, readcount);
outputblock = blockCipher(lastBlock, key);
outputblock = XOR(outputblock, block);
}
else
{
byte[] block = new byte[blocksize];
Array.Copy(inputBlock, 0, block, 0, readcount);
outputblock = blockCipher(inputBlock, key);
outputblock = XOR(outputblock, lastBlock);
}
}
//check if it is the last block and we decrypt, thus, we have to remove the padding
if (reader.Position == reader.Length && cipherAction == CipherAction.Decrypt && padding != PaddingType.None)
{
int valid = StripPadding(outputblock, blocksize, padding, blocksize);
if (valid != blocksize)
{
byte[] newoutputblock = new byte[valid];
Array.Copy(outputblock, 0, newoutputblock, 0, valid);
outputblock = newoutputblock;
}
else if (valid == 0)
{
outputblock = null;
}
}
//if we crypted something, we output it
if (outputblock != null)
{
writer.Write(outputblock, 0, outputblock.Length);
//if we wrote to the stream, we memorize the last input block for the visualization
lastInputBlock = inputBlock;
}
}
writer.Flush();
outputStream = writer;
}
}
}
public void Encrypt()
{
if (this.inputStream != null)
{
// Encrypt Stream
try
{
SymmetricAlgorithm p_alg = new PresentManaged();
ConfigureAlg(p_alg, true);
ICryptoolStream inputdata = InputStream;
inputdata = BlockCipherHelper.AppendPadding(InputStream, settings.padmap[settings.Padding], p_alg.BlockSize / 8);
CStreamReader reader = inputdata.CreateReader();
if ((this.presentation != null) & (p_alg.KeySize == 80))
{
byte[] block = new byte[8];
byte[] key = (byte[])p_alg.Key.Clone();
int r = reader.Read(block, 0, 8);
if (reader.CanSeek)
{
reader.Position = 0;
}
if (r < 8)
{
for (int i = 0; i < r; i++)
{
block[7 - i] = block[r - i - 1];
}
byte p;
if (p_alg.Padding == PaddingMode.PKCS7)
{
p = (byte)(8 - r);
}
else
{
p = (byte)0;
}
for (int i = 0; i < 8 - r; i++)
{
block[i] = p;
}
}
this.presentation.Assign_Values(key, block);
}
ICryptoTransform p_encryptor = p_alg.CreateEncryptor();
outputStream = new CStreamWriter();
p_crypto_stream_enc = new CryptoStream((Stream)reader, p_encryptor, CryptoStreamMode.Read);
byte[] buffer = new byte[p_alg.BlockSize / 8];
int bytesRead;
int position = 0;
DateTime startTime = DateTime.Now;
while ((bytesRead = p_crypto_stream_enc.Read(buffer, 0, buffer.Length)) > 0 && !stop)
{
outputStream.Write(buffer, 0, bytesRead);
if ((int)(reader.Position * 100 / inputStream.Length) > position)
{
position = (int)(reader.Position * 100 / inputStream.Length);
Progress(reader.Position, inputStream.Length);
}
}
p_crypto_stream_enc.Flush();
// p_crypto_stream_enc.Close();
DateTime stopTime = DateTime.Now;
TimeSpan duration = stopTime - startTime;
outputStream.Close();
if (!stop)
{
GuiLogMessage("Encryption complete! (in: " + inputStream.Length.ToString() + " bytes, out: " + outputStream.Length.ToString() + " bytes)", NotificationLevel.Info);
GuiLogMessage("Time used: " + duration.ToString(), NotificationLevel.Debug);
OnPropertyChanged("OutputStream");
}
else
{
GuiLogMessage("Aborted!", NotificationLevel.Info);
}
}
catch (CryptographicException cryptographicException)
{
// TODO: For an unknown reason p_crypto_stream can not be closed after exception.
// Trying so makes p_crypto_stream throw the same exception again. So in Dispose
// the error messages will be doubled.
// As a workaround we set p_crypto_stream to null here.
p_crypto_stream_enc = null;
GuiLogMessage(cryptographicException.Message, NotificationLevel.Error);
}
catch (Exception exception)
{
GuiLogMessage(exception.Message, NotificationLevel.Error);
}
finally
{
Progress(1, 1);
}
}
}
public void Decrypt()
{
if (this.inputStream != null)
{
// Decrypt Stream
try
{
SymmetricAlgorithm p_alg = new PresentManaged();
ConfigureAlg(p_alg, true);
ICryptoolStream inputdata = InputStream;
CStreamReader reader = inputdata.CreateReader();
ICryptoTransform p_decryptor = p_alg.CreateDecryptor();
outputStream = new CStreamWriter();
p_crypto_stream_dec = new CryptoStream((Stream)reader, p_decryptor, CryptoStreamMode.Read);
byte[] buffer = new byte[p_alg.BlockSize / 8];
int bytesRead;
int position = 0;
DateTime startTime = DateTime.Now;
while ((bytesRead = p_crypto_stream_dec.Read(buffer, 0, buffer.Length)) > 0 && !stop)
{
outputStream.Write(buffer, 0, bytesRead);
if ((int)(reader.Position * 100 / inputStream.Length) > position)
{
position = (int)(reader.Position * 100 / inputStream.Length);
Progress(reader.Position, inputStream.Length);
}
}
p_crypto_stream_dec.Flush();
p_crypto_stream_dec.Close();
DateTime stopTime = DateTime.Now;
TimeSpan duration = stopTime - startTime;
outputStream.Close();
if (settings.Action == 1)
{
outputStream = BlockCipherHelper.StripPadding(outputStream, settings.padmap[settings.Padding], p_alg.BlockSize / 8) as CStreamWriter;
}
if (!stop)
{
GuiLogMessage("Decryption complete! (in: " + inputStream.Length.ToString() + " bytes, out: " + outputStream.Length.ToString() + " bytes)", NotificationLevel.Info);
GuiLogMessage("Time used: " + duration.ToString(), NotificationLevel.Debug);
OnPropertyChanged("OutputStream");
}
else
{
GuiLogMessage("Aborted!", NotificationLevel.Info);
}
}
catch (CryptographicException cryptographicException)
{
// TODO: For an unknown reason p_crypto_stream can not be closed after exception.
// Trying so makes p_crypto_stream throw the same exception again. So in Dispose
// the error messages will be doubled.
// As a workaround we set p_crypto_stream to null here.
p_crypto_stream_dec = null;
GuiLogMessage(cryptographicException.Message, NotificationLevel.Error);
}
catch (Exception exception)
{
GuiLogMessage(exception.Message, NotificationLevel.Error);
}
finally
{
Progress(1, 1);
}
}
}
private void process(int action)
{
//Encrypt/Decrypt Stream
try
{
if (inputStream == null || inputStream.Length == 0)
{
GuiLogMessage("No input data, aborting now", NotificationLevel.Error);
return;
}
ICryptoTransform p_encryptor;
SymmetricAlgorithm p_alg = new RC2CryptoServiceProvider();
ConfigureAlg(p_alg);
outputStreamWriter = new CStreamWriter();
ICryptoolStream inputdata = InputStream;
if (action == 0)
{
inputdata = BlockCipherHelper.AppendPadding(InputStream, settings.padmap[settings.Padding], p_alg.BlockSize / 8);
}
CStreamReader reader = inputdata.CreateReader();
GuiLogMessage("Starting " + ((settings.Action == 0)?"encryption":"decryption") + " [Keysize=" + p_alg.KeySize.ToString() + " Bits, Blocksize=" + p_alg.BlockSize.ToString() + " Bits]", NotificationLevel.Info);
DateTime startTime = DateTime.Now;
// special handling of OFB mode, as it's not available for RC2 in .Net
if (settings.Mode == 3) // OFB - bei OFB ist encrypt = decrypt, daher keine Fallunterscheidung
{
p_encryptor = p_alg.CreateEncryptor(p_alg.Key, p_alg.IV);
byte[] IV = new byte[p_alg.IV.Length];
Array.Copy(p_alg.IV, IV, p_alg.IV.Length);
byte[] tmpInput = BlockCipherHelper.StreamToByteArray(inputdata);
byte[] outputData = new byte[tmpInput.Length];
for (int pos = 0; pos <= tmpInput.Length - p_encryptor.InputBlockSize;)
{
int l = p_encryptor.TransformBlock(IV, 0, p_encryptor.InputBlockSize, outputData, pos);
for (int i = 0; i < l; i++)
{
IV[i] = outputData[pos + i];
outputData[pos + i] ^= tmpInput[pos + i];
}
pos += l;
}
outputStreamWriter.Write(outputData);
}
else
{
p_encryptor = (action == 0) ? p_alg.CreateEncryptor() : p_alg.CreateDecryptor();
p_crypto_stream = new CryptoStream((Stream)reader, p_encryptor, CryptoStreamMode.Read);
byte[] buffer = new byte[p_alg.BlockSize / 8];
int bytesRead;
while ((bytesRead = p_crypto_stream.Read(buffer, 0, buffer.Length)) > 0 && !stop)
{
outputStreamWriter.Write(buffer, 0, bytesRead);
}
p_crypto_stream.Flush();
}
outputStreamWriter.Close();
DateTime stopTime = DateTime.Now;
TimeSpan duration = stopTime - startTime;
if (action == 1)
{
outputStreamWriter = BlockCipherHelper.StripPadding(outputStreamWriter, settings.padmap[settings.Padding], p_alg.BlockSize / 8) as CStreamWriter;
}
if (!stop)
{
GuiLogMessage(((settings.Action == 0) ? "Encryption" : "Decryption") + " complete! (in: " + InputStream.Length + " bytes, out: " + outputStreamWriter.Length + " bytes)", NotificationLevel.Info);
GuiLogMessage("Time used: " + duration, NotificationLevel.Debug);
OnPropertyChanged("OutputStream");
}
else
{
GuiLogMessage("Aborted!", NotificationLevel.Info);
}
}
catch (CryptographicException cryptographicException)
{
// TODO: For an unknown reason p_crypto_stream can not be closed after exception.
// Trying so makes p_crypto_stream throw the same exception again. So in Dispose
// the error messages will be doubled.
// As a workaround we set p_crypto_stream to null here.
p_crypto_stream = null;
GuiLogMessage(cryptographicException.Message, NotificationLevel.Error);
}
catch (Exception exception)
{
GuiLogMessage(exception.Message, NotificationLevel.Error);
}
finally
{
ProgressChanged(1, 1);
}
}
/// <summary>
/// Called by the execution engine threads to execute the internal plugin
/// </summary>
/// <param name="o"></param>
internal void Execute(Object o)
{
var executionEngine = (ExecutionEngine)o;
try
{
Stop = false;
plugin.PreExecution();
bool firstrun = true;
while (true)
{
resetEvent.WaitOne(10);
resetEvent.Reset();
//Check if we want to stop
if (Stop)
{
break;
}
// ################
// 0. If this is our first run and we are startable we start
// ################
//we are startable if we have NO input connectors
//Startable flag is deprecated now
if (firstrun && (InputConnectors.Count == 0 || HasOnlyOptionalUnconnectedInputs()))
{
firstrun = false;
try
{
PercentageFinished = 0;
GuiNeedsUpdate = true;
Plugin.Execute();
executionEngine.ExecutionCounter++;
PercentageFinished = 1;
GuiNeedsUpdate = true;
}
catch (Exception ex)
{
executionEngine.GuiLogMessage(
String.Format(Resources.PluginModel_Execute_An_error_occured_while_executing___0______1_, Name, ex.Message),
NotificationLevel.Error);
State = PluginModelState.Error;
GuiNeedsUpdate = true;
}
continue;
}
var breakit = false;
var atLeastOneNew = false;
// ################
// 1. Check if we may execute
// ################
//Check if all necessary inputs are set
foreach (ConnectorModel connectorModel in InputConnectors)
{
if (!connectorModel.IControl &&
(connectorModel.IsMandatory || connectorModel.InputConnections.Count > 0))
{
if (connectorModel.DataQueue.Count == 0 && connectorModel.LastData == null)
{
breakit = true;
continue;
}
if (connectorModel.DataQueue.Count > 0)
{
atLeastOneNew = true;
}
}
}
//Check if all outputs are free
foreach (ConnectorModel connectorModel in OutputConnectors)
{
if (!connectorModel.IControl)
{
foreach (ConnectionModel connectionModel in connectorModel.OutputConnections)
{
if (connectionModel.To.DataQueue.Count > 0)
{
breakit = true;
}
}
}
}
//Gate is a special case: here we need all new data
if (PluginType.FullName.Equals("Gate.Gate"))
{
foreach (ConnectorModel connectorModel in InputConnectors)
{
if (connectorModel.InputConnections.Count > 0 && connectorModel.DataQueue.Count == 0)
{
breakit = true;
}
}
}
if (breakit || !atLeastOneNew)
{
continue;
}
// ################
//2. Fill all Inputs of the plugin, if this fails break the loop run
// ################
foreach (ConnectorModel connectorModel in InputConnectors)
{
try
{
if ((connectorModel.DataQueue.Count == 0 && connectorModel.LastData == null) || connectorModel.InputConnections.Count == 0)
{
continue;
}
object data;
if (connectorModel.DataQueue.Count > 0)
{
data = connectorModel.DataQueue.Dequeue();
}
else
{
continue;
}
if (data == null)
{
continue;
}
//Implicit conversions:
//Cast from BigInteger -> Integer
if ((connectorModel.ConnectorType.FullName == "System.Int32" ||
connectorModel.ConnectorType.FullName == "System.Int64") &&
data.GetType().FullName == "System.Numerics.BigInteger")
{
try
{
data = (int)((BigInteger)data);
}
catch (OverflowException)
{
State = PluginModelState.Error;
WorkspaceModel.ExecutionEngine.GuiLogMessage(String.Format(Resources.PluginModel_Execute_Number_of__0__too_big_for__1____2_, connectorModel.Name, Name, data), NotificationLevel.Error);
}
}
//Cast from Integer -> BigInteger
else if (connectorModel.ConnectorType.FullName == "System.Numerics.BigInteger" &&
(data.GetType().FullName == "System.Int32" || data.GetType().FullName == "System.Int64"))
{
data = new BigInteger((int)data);
}
//Cast from System.Byte[] -> System.String (UTF8)
else if (connectorModel.ConnectorType.FullName == "System.String" && data.GetType().FullName == "System.Byte[]")
{
var encoding = new UTF8Encoding();
data = encoding.GetString((byte[])data);
}
//Cast from System.String (UTF8) -> System.Byte[]
else if (connectorModel.ConnectorType.FullName == "System.Byte[]" && data.GetType().FullName == "System.String")
{
var encoding = new UTF8Encoding();
data = encoding.GetBytes((string)data);
}
//Cast from System.String (UTF8) -> ICryptoolStream
else if (connectorModel.ConnectorType.FullName == "Cryptool.PluginBase.IO.ICryptoolStream" && data.GetType().FullName == "System.String")
{
var writer = new CStreamWriter();
var str = (string)data;
if (str.Length > MaxStrStreamConversionLength)
{
str = str.Substring(0, MaxStrStreamConversionLength);
}
var encoding = new UTF8Encoding();
writer.Write(encoding.GetBytes(str));
writer.Close();
data = writer;
}
//Cast from ICryptoolStream -> System.String (UTF8)
else if (connectorModel.ConnectorType.FullName == "System.String" && data.GetType().FullName == "Cryptool.PluginBase.IO.CStreamWriter")
{
var writer = (CStreamWriter)data;
using (var reader = writer.CreateReader())
{
var buffer = new byte[MaxStrStreamConversionLength];
var readamount = reader.Read(buffer, 0, MaxStrStreamConversionLength);
if (readamount > 0)
{
var encoding = new UTF8Encoding();
var str = encoding.GetString(buffer, 0, readamount);
data = str;
}
else
{
data = String.Empty;
}
}
}
//Cast to System.String
else if (connectorModel.ConnectorType.FullName == "System.String")
{
//Cast from System.Boolean -> System.String
if (data.GetType().FullName == "System.Boolean")
{
data = ((Boolean)data).ToString();
}
//Cast from System.Int32 -> System.String
else if (data.GetType().FullName == "System.Int32")
{
data = ((Int32)data).ToString();
}
//Cast from System.Int64 -> System.String
else if (data.GetType().FullName == "System.Int64")
{
data = ((Int64)data).ToString();
}
//Cast from System.Numerics.BigInteger -> System.String
else if (data.GetType().FullName == "System.Numerics.BigInteger")
{
data = ((BigInteger)data).ToString();
}
}
//now set the data
if (connectorModel.property == null)
{
connectorModel.property =
Plugin.GetType().GetProperty(connectorModel.PropertyName);
}
connectorModel.property.SetValue(Plugin, data, null);
}
catch (Exception ex)
{
executionEngine.GuiLogMessage(
String.Format(Resources.PluginModel_Execute_An_error_occured_while_setting_value_of_connector___0___of___1_____2_, connectorModel.Name, Name, ex.Message), NotificationLevel.Error);
State = PluginModelState.Error;
GuiNeedsUpdate = true;
}
}
// ################
//3. Execute
// ################
try
{
if (executionEngine.SleepTime > 0)
{
Thread.Sleep(executionEngine.SleepTime);
}
PercentageFinished = 0;
GuiNeedsUpdate = true;
Plugin.Execute();
executionEngine.ExecutionCounter++;
if (plugin.GetAutoAssumeFullEndProgressAttribute())
{
PercentageFinished = 1;
GuiNeedsUpdate = true;
}
}
catch (Exception ex)
{
executionEngine.GuiLogMessage(
String.Format(Resources.PluginModel_Execute_An_error_occured_while_executing____0______1__, Name, ex.Message), NotificationLevel.Error);
State = PluginModelState.Error;
GuiNeedsUpdate = true;
}
// ################
// 4. Set all connectorModels belonging to this pluginModel to inactive
// ################
foreach (ConnectorModel connectorModel in InputConnectors)
{
foreach (var connectionModel in connectorModel.InputConnections)
{
connectionModel.Active = false;
connectionModel.GuiNeedsUpdate = true;
}
}
// ################
// 5. let all plugins before this check if it may execute
// ################
foreach (ConnectorModel connectorModel in InputConnectors)
{
foreach (ConnectionModel connectionModel in connectorModel.InputConnections)
{
connectionModel.From.PluginModel.resetEvent.Set();
}
}
}
plugin.PostExecution();
}
catch (Exception ex)
{
executionEngine.GuiLogMessage(
String.Format(Resources.PluginModel_Execute_An_error_occured_while_executing___0______1_, Name, ex.Message),
NotificationLevel.Error);
State = PluginModelState.Error;
}
}
public void Execute()
{
try
{
if (settings.NumberOfPacketsToBeCreated == 0)
{
GuiLogMessage("ERROR. No number of packets to be created given. Aborting now.", NotificationLevel.Error);
return;
}
rnd = new Random();
string successMessage = string.Empty;
packetCounter = 0;
outputStream = new CStreamWriter();
outputStream.Write(header, 0, header.Length);
// IPv4 packets are requested
if (settings.Action == 0)
{
DateTime startTime = DateTime.Now;
for (int i = 0; i < settings.NumberOfPacketsToBeCreated; i++)
{
if (stop)
{
break;
}
Progress(i, settings.NumberOfPacketsToBeCreated);
byte[] tmp = generateIPPackets();
outputStream.Write(tmp, 0, tmp.Length);
packetCounter++;
}
DateTime stopTime = DateTime.Now;
TimeSpan duration = stopTime - startTime;
if (packetCounter == 1)
{
successMessage = "Successfully created " + packetCounter + " IPv4 packet.";
}
else
{
successMessage = "Successfully created " + packetCounter.ToString("#,#", CultureInfo.InstalledUICulture) + " IPv4 packets.";
}
if (!stop)
{
GuiLogMessage(successMessage, NotificationLevel.Info);
GuiLogMessage("Time used [h:min:sec]: " + duration, NotificationLevel.Info);
outputStream.Close();
OnPropertyChanged("OutputStream");
}
}
// ARP packets are requested
if (settings.Action == 1)
{
DateTime startTime = DateTime.Now;
for (int i = 0; i < settings.NumberOfPacketsToBeCreated; i++)
{
if (stop)
{
break;
}
Progress(i, settings.NumberOfPacketsToBeCreated);
byte[] tmp = generateARPRequestPackets();
//outputList.Add(tmp);
outputStream.Write(tmp, 0, tmp.Length);
packetCounter++;
}
DateTime stopTime = DateTime.Now;
TimeSpan duration = stopTime - startTime;
if (packetCounter == 1)
{
successMessage = "Successfully created " + packetCounter + " ARP request packet.";
}
else
{
successMessage = "Successfully created " + packetCounter.ToString("#,#", CultureInfo.InstalledUICulture) + " ARP request packets.";
}
if (!stop)
{
GuiLogMessage(successMessage, NotificationLevel.Info);
GuiLogMessage("Time used [h:min:sec]: " + duration, NotificationLevel.Info);
outputStream.Close();
OnPropertyChanged("OutputStream");
}
}
if (stop)
{
outputStream.Close();
GuiLogMessage("Aborted!", NotificationLevel.Info);
}
}
catch (Exception exc)
{
GuiLogMessage(exc.Message, NotificationLevel.Error);
}
finally
{
Progress(1, 1);
}
}
private void process(int action)
{
//Encrypt/Decrypt Stream
try
{
if (InputStream == null || InputStream.Length == 0)
{
GuiLogMessage("No input data, aborting now", NotificationLevel.Error);
return;
}
ICryptoTransform p_encryptor;
SymmetricAlgorithm p_alg = null;
if (settings.TripleDES)
{
p_alg = new TripleDESCryptoServiceProvider();
}
else
{
p_alg = new DESCryptoServiceProvider();
}
ConfigureAlg(p_alg);
outputStreamWriter = new CStreamWriter();
ICryptoolStream inputdata = InputStream;
// append 1-0 padding (special handling, as it's not present in System.Security.Cryptography.PaddingMode)
if (action == 0)
{
inputdata = BlockCipherHelper.AppendPadding(InputStream, settings.padmap[settings.Padding], p_alg.BlockSize / 8);
}
CStreamReader reader = inputdata.CreateReader();
//GuiLogMessage("Starting encryption [Keysize=" + p_alg.KeySize.ToString() + " Bits, Blocksize=" + p_alg.BlockSize.ToString() + " Bits]", NotificationLevel.Info);
DateTime startTime = DateTime.Now;
// special handling of OFB mode, as it's not available for DES in .Net
if (settings.Mode == 3) // OFB - bei OFB ist encrypt = decrypt, daher keine Fallunterscheidung
{
try
{
p_encryptor = p_alg.CreateEncryptor(p_alg.Key, p_alg.IV);
}
catch
{
//dirty hack to allow weak keys:
MethodInfo mi = p_alg.GetType().GetMethod("_NewEncryptor", BindingFlags.NonPublic | BindingFlags.Instance);
object[] Par = { p_alg.Key, p_alg.Mode, p_alg.IV, p_alg.FeedbackSize, 0 };
p_encryptor = mi.Invoke(p_alg, Par) as ICryptoTransform;
}
byte[] IV = new byte[p_alg.IV.Length];
Array.Copy(p_alg.IV, IV, p_alg.IV.Length);
byte[] tmpInput = BlockCipherHelper.StreamToByteArray(inputdata);
byte[] outputData = new byte[tmpInput.Length];
for (int pos = 0; pos <= tmpInput.Length - p_encryptor.InputBlockSize;)
{
int l = p_encryptor.TransformBlock(IV, 0, p_encryptor.InputBlockSize, outputData, pos);
for (int i = 0; i < l; i++)
{
IV[i] = outputData[pos + i];
outputData[pos + i] ^= tmpInput[pos + i];
}
pos += l;
}
outputStreamWriter.Write(outputData);
}
else
{
try
{
p_encryptor = (action == 0) ? p_alg.CreateEncryptor() : p_alg.CreateDecryptor();
}
catch
{
//dirty hack to allow weak keys:
MethodInfo mi = (action == 0) ? p_alg.GetType().GetMethod("_NewEncryptor", BindingFlags.NonPublic | BindingFlags.Instance)
: p_alg.GetType().GetMethod("_NewDecryptor", BindingFlags.NonPublic | BindingFlags.Instance);;
object[] par = { p_alg.Key, p_alg.Mode, p_alg.IV, p_alg.FeedbackSize, 0 };
p_encryptor = mi.Invoke(p_alg, par) as ICryptoTransform;
}
p_crypto_stream = new CryptoStream((Stream)reader, p_encryptor, CryptoStreamMode.Read);
byte[] buffer = new byte[p_alg.BlockSize / 8];
int bytesRead;
while ((bytesRead = p_crypto_stream.Read(buffer, 0, buffer.Length)) > 0 && !stop)
{
//// remove 1-0 padding (special handling, as it's not present in System.Security.Cryptography.PaddingMode)
//if (action == 1 && settings.Padding == 5 && reader.Position == reader.Length)
// bytesRead = BlockCipherHelper.StripPadding(buffer, bytesRead, BlockCipherHelper.PaddingType.OneZeros, buffer.Length);
outputStreamWriter.Write(buffer, 0, bytesRead);
}
p_crypto_stream.Flush();
}
outputStreamWriter.Close();
//DateTime stopTime = DateTime.Now;
//TimeSpan duration = stopTime - startTime;
if (action == 1)
{
outputStreamWriter = BlockCipherHelper.StripPadding(outputStreamWriter, settings.padmap[settings.Padding], p_alg.BlockSize / 8) as CStreamWriter;
}
if (!stop)
{
//GuiLogMessage("Encryption complete! (in: " + reader.Length.ToString() + " bytes, out: " + outputStreamWriter.Length.ToString() + " bytes)", NotificationLevel.Info);
//GuiLogMessage("Time used: " + duration.ToString(), NotificationLevel.Debug);
OnPropertyChanged("OutputStream");
}
else
{
GuiLogMessage("Aborted!", NotificationLevel.Info);
}
}
catch (CryptographicException cryptographicException)
{
p_crypto_stream = null;
string msg = cryptographicException.Message;
// Workaround for misleading padding error message
if (msg.StartsWith("Ungültige Daten"))
{
msg = "Das Padding ist ungültig und kann nicht entfernt werden.";
}
GuiLogMessage(msg, NotificationLevel.Error);
}
catch (Exception exception)
{
GuiLogMessage(exception.Message, NotificationLevel.Error);
}
finally
{
ProgressChanged(1, 1);
}
}
private void process(int action)
{
//Encrypt/Decrypt Stream
try
{
if (InputStream == null || InputStream.Length == 0)
{
GuiLogMessage("No input data, aborting now", NotificationLevel.Error);
return;
}
SymmetricAlgorithm p_alg = null;
if (settings.CryptoAlgorithm == 1)
{
p_alg = new RijndaelManaged();
}
else
{
p_alg = new AesCryptoServiceProvider();
}
ConfigureAlg(p_alg);
ICryptoTransform p_encryptor = null;
switch (action)
{
case 0:
p_encryptor = p_alg.CreateEncryptor();
break;
case 1:
p_encryptor = p_alg.CreateDecryptor();
break;
}
outputStreamWriter = new CStreamWriter();
ICrypToolStream inputdata = InputStream;
string mode = action == 0 ? "encryption" : "decryption";
long inbytes, outbytes;
//GuiLogMessage("Starting " + mode + " [Keysize=" + p_alg.KeySize.ToString() + " Bits, Blocksize=" + p_alg.BlockSize.ToString() + " Bits]", NotificationLevel.Info);
DateTime startTime = DateTime.Now;
// special handling of OFB mode, as it's not available for AES in .Net
if (settings.Mode == 3) // OFB - bei OFB ist encrypt = decrypt, daher keine Fallunterscheidung
{
if (action == 0)
{
inputdata = BlockCipherHelper.AppendPadding(InputStream, settings.padmap[settings.Padding], p_alg.BlockSize / 8);
}
ICryptoTransform encrypt = p_alg.CreateEncryptor(p_alg.Key, p_alg.IV);
byte[] IV = new byte[p_alg.IV.Length];
Array.Copy(p_alg.IV, IV, p_alg.IV.Length);
byte[] tmpInput = BlockCipherHelper.StreamToByteArray(inputdata);
byte[] outputData = new byte[tmpInput.Length];
for (int pos = 0; pos <= tmpInput.Length - encrypt.InputBlockSize;)
{
int l = encrypt.TransformBlock(IV, 0, encrypt.InputBlockSize, outputData, pos);
for (int i = 0; i < l; i++)
{
IV[i] = outputData[pos + i];
outputData[pos + i] ^= tmpInput[pos + i];
}
pos += l;
}
int validBytes = (int)inputdata.Length;
if (action == 1)
{
validBytes = BlockCipherHelper.StripPadding(outputData, validBytes, settings.padmap[settings.Padding], p_alg.BlockSize / 8);
}
encrypt.Dispose();
outputStreamWriter.Write(outputData, 0, validBytes);
inbytes = inputdata.Length;
}
else if (settings.Mode == 4)
{
if (action == 0)
{
inputdata = BlockCipherHelper.AppendPadding(InputStream, settings.padmap[settings.Padding], p_alg.BlockSize / 8);
}
byte[] tmpInput = BlockCipherHelper.StreamToByteArray(inputdata);
var cipher = new AesEngine();
var eaxCipher = new EaxBlockCipher(cipher);
var keyParameter = new KeyParameter(p_alg.Key);
var parameter = new ParametersWithIV(keyParameter, p_alg.IV);
eaxCipher.Init((action == 0) ? true : false, parameter);
byte[] datOut = new byte[eaxCipher.GetOutputSize(tmpInput.Length)];
int outOff = eaxCipher.ProcessBytes(tmpInput, 0, tmpInput.Length, datOut, 0);
outOff += eaxCipher.DoFinal(datOut, outOff);
int validBytes = (int)eaxCipher.GetOutputSize(tmpInput.Length);
if (action == 1)
{
validBytes = BlockCipherHelper.StripPadding(datOut, validBytes, settings.padmap[settings.Padding], p_alg.BlockSize / 8);
}
outputStreamWriter.Write(datOut, 0, validBytes);
inbytes = inputdata.Length;
}
else
{
// append 1-0 padding (special handling, as it's not present in System.Security.Cryptography.PaddingMode)
if (action == 0 && settings.Padding == 5)
{
inputdata = BlockCipherHelper.AppendPadding(InputStream, BlockCipherHelper.PaddingType.OneZeros, p_alg.BlockSize / 8);
}
CStreamReader reader = inputdata.CreateReader();
p_crypto_stream = new CryptoStream(reader, p_encryptor, CryptoStreamMode.Read);
byte[] buffer = new byte[p_alg.BlockSize / 8];
int bytesRead;
int position = 0;
while ((bytesRead = p_crypto_stream.Read(buffer, 0, buffer.Length)) > 0 && !stop)
{
// remove 1-0 padding (special handling, as it's not present in System.Security.Cryptography.PaddingMode)
if (action == 1 && settings.Padding == 5 && reader.Position == reader.Length)
{
bytesRead = BlockCipherHelper.StripPadding(buffer, bytesRead, BlockCipherHelper.PaddingType.OneZeros, buffer.Length);
}
outputStreamWriter.Write(buffer, 0, bytesRead);
if ((int)(reader.Position * 100 / reader.Length) > position)
{
position = (int)(reader.Position * 100 / reader.Length);
ProgressChanged(reader.Position, reader.Length);
}
}
p_crypto_stream.Flush();
inbytes = reader.Length;
}
outbytes = outputStreamWriter.Length;
DateTime stopTime = DateTime.Now;
TimeSpan duration = stopTime - startTime;
// (outputStream as CrypToolStream).FinishWrite();
if (!stop)
{
mode = action == 0 ? "Encryption" : "Decryption";
//GuiLogMessage(mode + " complete! (in: " + inbytes + " bytes, out: " + outbytes + " bytes)", NotificationLevel.Info);
//GuiLogMessage("Time used: " + duration.ToString(), NotificationLevel.Debug);
outputStreamWriter.Close();
OnPropertyChanged("OutputStream");
}
if (stop)
{
outputStreamWriter.Close();
GuiLogMessage("Aborted!", NotificationLevel.Info);
}
}
catch (CryptographicException cryptographicException)
{
// TODO: For an unknown reason p_crypto_stream cannot be closed after exception.
// Trying so makes p_crypto_stream throw the same exception again. So in Dispose
// the error messages will be doubled.
// As a workaround we set p_crypto_stream to null here.
p_crypto_stream = null;
string msg = cryptographicException.Message;
// Workaround for misleading german error message
if (msg == "Die Zeichenabstände sind ungültig und können nicht entfernt werden.")
{
msg = "Das Padding ist ungültig und kann nicht entfernt werden.";
}
GuiLogMessage(msg, NotificationLevel.Error);
}
catch (Exception exception)
{
GuiLogMessage(exception.Message, NotificationLevel.Error);
}
finally
{
ProgressChanged(1, 1);
}
}
/// <summary>
/// Function to write data to the OutputStream.
/// </summary>
/// <param name="value">the value that should be written</param>
private void WriteOutput(ulong value)
{
outputStreamWriter.Write(encoding.GetBytes(value.ToString()));
}
/// <summary>
/// Function to write data to the DebugStream.
/// </summary>
/// <param name="str">the string that should be written</param>
private void WriteDebug(string str)
{
debugDataWriter.Write(encoding.GetBytes(str));
}
private void process(int action, int padding)
{
//Encrypt/Decrypt Stream
try
{
if (inputStream == null || inputStream.Length == 0)
{
GuiLogMessage("No input data, aborting now", NotificationLevel.Error);
return;
}
outputStreamWriter = new CStreamWriter();
long inputbytes = inputStream.Length;
GuiLogMessage("inputStream length [bytes]: " + inputStream.Length.ToString(), NotificationLevel.Debug);
int bytesRead = 0;
int blocksRead = 0;
int position;
int blocks;
// get number of blocks
if (((int)inputbytes % 8) == 0)
{
blocks = (int)inputbytes / 8;
}
else
{
blocks = (int)Math.Round(inputbytes / 8 + 0.4, 0) + 1;
}
byte[] inputbuffer = new byte[8 * blocks];
byte[] outputbuffer = new byte[4];
GuiLogMessage("# of blocks: " + blocks.ToString(), NotificationLevel.Debug);
using (CStreamReader reader = inputStream.CreateReader())
{
//read input
//GuiLogMessage("Current position: " + inputStream.Position.ToString(), NotificationLevel.Debug);
for (blocksRead = 0; blocksRead <= blocks - 1; blocksRead++)
{
for (position = bytesRead; position <= (blocksRead * 8 + 7); position++)
{
// no padding to do
if (position < inputbytes)
{
inputbuffer[position] = (byte)reader.ReadByte();
}
else // padding to do!
{
if (padding == 0)
{
// padding with zeros
inputbuffer[position] = 48;
}
else if (padding == 2)
{
// padding with PKCS7
int temp = 8 - (int)inputbytes % 8 + 48;
inputbuffer[position] = (byte)temp;
}
else
{
// no padding
inputbuffer[position] = (byte)reader.ReadByte();
GuiLogMessage("Byte is: " + inputbuffer[position].ToString(), NotificationLevel.Info);
}
}
bytesRead++;
//GuiLogMessage("Current position: " + inputStream.Position.ToString(), NotificationLevel.Debug);
//GuiLogMessage("Content of buffer[" + position + "]: " + buffer[position].ToString(), NotificationLevel.Debug);
}
}
//GuiLogMessage("vector[0] before coding: " + vector[0].ToString(), NotificationLevel.Debug);
//GuiLogMessage("vector[1] before coding: " + vector[1].ToString(), NotificationLevel.Debug);
uint[] key = new uint[4];
long keybytes = inputKey.Length;
GuiLogMessage("inputKey length [byte]: " + keybytes.ToString(), NotificationLevel.Debug);
if (keybytes != 16)
{
GuiLogMessage("Given key has false length. Please provide a key with 128 Bits length. Aborting now.", NotificationLevel.Error);
return;
}
else
{
key[0] = BitConverter.ToUInt32(inputKey, 0);
key[1] = BitConverter.ToUInt32(inputKey, 4);
key[2] = BitConverter.ToUInt32(inputKey, 8);
key[3] = BitConverter.ToUInt32(inputKey, 12);
}
//encryption or decryption
GuiLogMessage("Action is: " + action, NotificationLevel.Debug);
DateTime startTime = DateTime.Now;
uint[] vector = new uint[2];
if (action == 0)
{
StatusChanged((int)HIGHTImage.Encode);
GuiLogMessage("Starting encryption [Keysize=128 Bits, Blocksize=64 Bits]", NotificationLevel.Info);
for (int i = 0; i <= blocks - 1; i++)
{
vector[0] = BitConverter.ToUInt32(inputbuffer, (i * 8));
vector[1] = BitConverter.ToUInt32(inputbuffer, (i * 8 + 4));
//GuiLogMessage("vector[0]: " + vector[0].ToString("X"), NotificationLevel.Info);
//GuiLogMessage("vector[1]: " + vector[1].ToString("X"), NotificationLevel.Info);
vector = general_test(vector, key, 0);
//write buffer to output stream
outputbuffer = BitConverter.GetBytes(vector[0]);
outputStreamWriter.Write(outputbuffer, 0, 4);
outputbuffer = BitConverter.GetBytes(vector[1]);
outputStreamWriter.Write(outputbuffer, 0, 4);
}
}
else if (action == 1)
{
StatusChanged((int)HIGHTImage.Decode);
GuiLogMessage("Starting decryption [Keysize=128 Bits, Blocksize=64 Bits]", NotificationLevel.Info);
for (int i = 0; i <= blocks - 1; i++)
{
vector[0] = BitConverter.ToUInt32(inputbuffer, i * 8);
vector[1] = BitConverter.ToUInt32(inputbuffer, i * 8 + 4);
vector = general_test(vector, key, 1);
//write buffer to output stream
outputbuffer = BitConverter.GetBytes(vector[0]);
outputStreamWriter.Write(outputbuffer, 0, 4);
outputbuffer = BitConverter.GetBytes(vector[1]);
outputStreamWriter.Write(outputbuffer, 0, 4);
}
}
/*while ((bytesRead = inputStream.Read(buffer, 0, buffer.Length)) > 0 && !stop)
* {
* outputStream.Write(buffer, 0, bytesRead);
* if ((int)(inputStream.Position * 100 / inputStream.Length) > position)
* {
* position = (int)(inputStream.Position * 100 / inputStream.Length);
* //ProgressChanged(inputStream.Position, inputStream.Length);
* }
* }*/
long outbytes = outputStreamWriter.Length;
DateTime stopTime = DateTime.Now;
TimeSpan duration = stopTime - startTime;
//(outputStream as CryptoolStream).FinishWrite();
if (!stop)
{
if (action == 0)
{
GuiLogMessage("Encryption complete! (in: " + inputStream.Length.ToString() + " bytes, out: " + outbytes.ToString() + " bytes)", NotificationLevel.Info);
}
else
{
GuiLogMessage("Decryption complete! (in: " + inputStream.Length.ToString() + " bytes, out: " + outbytes.ToString() + " bytes)", NotificationLevel.Info);
}
GuiLogMessage("Time used: " + duration.ToString(), NotificationLevel.Debug);
outputStreamWriter.Close();
OnPropertyChanged("OutputStream");
}
if (stop)
{
outputStreamWriter.Close();
GuiLogMessage("Aborted!", NotificationLevel.Info);
}
}
}
/*catch (CryptographicException cryptographicException)
* {
* // TODO: For an unknown reason p_crypto_stream can not be closed after exception.
* // Trying so makes p_crypto_stream throw the same exception again. So in Dispose
* // the error messages will be doubled.
* // As a workaround we set p_crypto_stream to null here.
* p_crypto_stream = null;
* //GuiLogMessage(cryptographicException.Message, NotificationLevel.Error);
* }*/
catch (Exception exception)
{
GuiLogMessage(exception.Message, NotificationLevel.Error);
}
finally
{
ProgressChanged(1, 1);
}
}