} // stop button clicks when already clicked
private void btnGenerate_Click(object sender, EventArgs e)
{
if (!IsGenerating)
{
IsGenerating = true;
Roles = COBieMergeRoles.Unknown; //set to unknown, reset below if any, if not will stay as unknown
var checkedRoles = checkedListRoles.CheckedItems;
int index = 0;
foreach (var item in checkedRoles)
{
string rolestr = (string)item;
COBieMergeRoles role = (COBieMergeRoles)Enum.Parse(typeof(COBieMergeRoles), rolestr);
if (index == 0)
{
Roles = role;
}
else
{
Roles |= role;
}
index++;
}
Generate();
}
else
{
MessageBox.Show("Currently in an action");
}
}
/// <summary>
/// Get merge roles for federated models, used to work out Model Merge Precedence Rules
/// </summary>
private Dictionary <XbimModel, COBieMergeRoles> LinkRoleToModel()
{
Dictionary <IfcRole, COBieMergeRoles> mapMergeRoles = MapRolesForMerge();//assign merge role to a IfcRoleEnum value
Dictionary <XbimModel, COBieMergeRoles> mapModelToMergeRoles = new Dictionary <XbimModel, COBieMergeRoles>();
//mapModelToMergeRoles.Add(Model, COBieMergeRoles.Unknown); //assume that it is just the holder model(xBIMf) (as xbim is creating holding file .xbimf) for and all the models are in the Model.RefencedModels property
//now get the referenced models
foreach (var refModel in Model.ReferencedModels)
{
IfcDocumentInformation doc = refModel.DocumentInformation;
IfcOrganization owner = doc.DocumentOwner as IfcOrganization;
if ((owner != null) && (owner.Roles != null))
{
COBieMergeRoles mergeRoles = COBieMergeRoles.Unknown;
foreach (var role in owner.Roles)
{
IfcRole roleitem = role.Role;
if (mapMergeRoles[roleitem] != COBieMergeRoles.Unknown)
{
mergeRoles = mergeRoles | mapMergeRoles[roleitem]; //use in if's ((mergeRoles & COBieMergeRoles.Architectural) == COBieMergeRoles.Architectural)
//remove the unknown as we now have at least one value
if ((mergeRoles & COBieMergeRoles.Unknown) == COBieMergeRoles.Unknown)
{
mergeRoles = mergeRoles ^ COBieMergeRoles.Unknown;
}
}
}
mapModelToMergeRoles.Add(refModel.Model, mergeRoles);
}
}
return(mapModelToMergeRoles);
}
/// <summary>
/// Create the COBieBuilder, holds COBieWorkBook
/// </summary>
/// <param name="parameters">Params</param>
/// <returns>COBieBuilder</returns>
private COBieWorkbook GenerateFederatedCOBieWorkBook(Params parameters)
{
string xbimFile = parameters.ModelFile;
COBieBuilder builder = null;
COBieWorkbook fedWorkBook = null;
List <COBieWorkbook> workbooks = new List <COBieWorkbook>();
LogBackground(String.Format("Loading federated model {0}...", xbimFile));
using (XbimModel model = new XbimModel())
{
model.Open(xbimFile, XbimDBAccess.ReadWrite);
Model = model; //used to check we close file on Close event
// Build context on the XBimF model to link roles
COBieContext context = new COBieContext(_worker.ReportProgress);
context.TemplateFileName = parameters.TemplateFile;
context.Model = model;
context.Exclude = UserFilters;
foreach (var ModelRoles in context.MapMergeRoles)
{
XbimModel refModel = ModelRoles.Key;
COBieMergeRoles roles = ModelRoles.Value;
COBieContext refContext = new COBieContext(_worker.ReportProgress);
refContext.TemplateFileName = parameters.TemplateFile;
refContext.Model = refModel;
refContext.MapMergeRoles[refModel] = roles;
refContext.Exclude = UserFilters;
// Create COBieReader
LogBackground("Generating COBie data...");
builder = new COBieBuilder(refContext);
workbooks.Add(builder.Workbook);
}
}
if (workbooks.Count > 1)
{
FederateCOBie fedCOBie = new FederateCOBie(_worker.ReportProgress);
fedWorkBook = fedCOBie.Merge(workbooks);
}
else if (workbooks.Count == 1)
{
fedWorkBook = workbooks[0];
}
return(fedWorkBook);
}
/// <summary>
/// Role Merge
/// </summary>
/// <param name="model"></param>
/// <param name="fileRoles">bit fields enumeration to hold all the roles in one place using bitwise AND, OR, EXCLUSIVE OR</param>
public void ValidateRoles(XbimModel model, COBieMergeRoles fileRoles)
{
#if DEBUG
Stopwatch timer = new Stopwatch();
timer.Start();
#endif
if (fileRoles != COBieMergeRoles.Unknown) //if role is a single value of unknown then do no merging
{
var sheet = this[Constants.WORKSHEET_COMPONENT];
List <string> typeGlobalIds = sheet.ValidateComponentMerge(model, fileRoles);
sheet = this[Constants.WORKSHEET_TYPE];
int remNo = sheet.ValidateTypeMerge(typeGlobalIds);
sheet = this[Constants.WORKSHEET_COMPONENT];
List <string> keyList = new List <string>();
List <string> nameList = new List <string>();
if (sheet.RemovedRows != null)
{
foreach (var item in sheet.RemovedRows)
{
string sheetName = "Component";
COBieColumn colName = item.ParentSheet.Columns.Where(c => c.Value.ColumnName == "Name").Select(c => c.Value).FirstOrDefault();
var name = item[colName.ColumnOrder].CellValue;
nameList.Add(name);
keyList.Add(sheetName + name);
}
sheet = this[Constants.WORKSHEET_ATTRIBUTE];
int attRemNo = sheet.ValidateAttributeMerge(keyList);
sheet = this[Constants.WORKSHEET_SYSTEM];
int systemRemNo = sheet.ValidateSystemMerge(nameList);
}
}
#if DEBUG
timer.Stop();
Console.WriteLine(String.Format("Time to generate Role Merge data = {0} seconds", timer.Elapsed.TotalSeconds.ToString("F3")));
#endif
}
private bool FlowController(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcFlowController ifcFlowController = ifcElement as IfcFlowController;
if (ifcFlowController != null)
{
List<string> testStrings = new List<string>(){"Facility Lightning Protection", "Circuit", "Switch"};
var ifcDamperType = ifcFlowController.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcDamperType>(); //Excel cell ref E463
//Excel A437 to A449 id full range of the IfcDamperTypeEnum which is a property of IfcDamperType, so if we have ifcDamperType.Any() then we have covered this requirement
if (ifcDamperType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
//Excel A622 to A631 id full range of the IfcElectricDistributionPointEnum which is a property of IfcElectricDistributionPoint, so if we have a IfcElectricDistributionPoint then we have covered this requirement
if (ifcFlowController is IfcElectricDistributionPoint)//Excel cell ref E637
{
IfcElectricDistributionPoint ifcElectricDistributionPoint = (IfcElectricDistributionPoint)ifcFlowController;
//Excel cell ref E738
if (ifcElectricDistributionPoint.DistributionPointFunction == IfcElectricDistributionPointFunctionEnum.USERDEFINED)
{
if ((!string.IsNullOrEmpty(ifcElectricDistributionPoint.UserDefinedFunction)) &&
testStrings.Contains(ifcElectricDistributionPoint.UserDefinedFunction)
)
{
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
}
else
return false;
}
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
}
var ifcElectricTimeControlType = ifcFlowController.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcElectricTimeControlType>(); //Excel cell ref E665
//Excel A660 to A664 id full range of the IfcElectricTimeControlTypeEnum which is a property of IfcElectricTimeControlType, so if we have ifcElectricTimeControlType.Any() then we have covered this requirement
if (ifcElectricTimeControlType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
var ifcProtectiveDeviceType = ifcFlowController.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcProtectiveDeviceType>(); //Excel cell ref E982
//Excel A973 to A981 id full range of the IfcProtectiveDeviceTypeEnum which is a property of IfcProtectiveDeviceType, so if we have ifcProtectiveDeviceType.Any() then we have covered this requirement
//note Ifc 2x4 has EARTHLEAKAGECIRCUITBREAKER, EARTHINGSWITCH but Ifc 2x3 has EARTHFAILUREDEVICE, assume this equals the Ifc 2x4 requirement
if (ifcProtectiveDeviceType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
//IfcProtectiveDeviceTrippingUnitType is Ifc 2x4, not supported at this time. E989
var ifcSwitchingDeviceType = ifcFlowController.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcSwitchingDeviceType>(); //Excel cell ref E1153
//Excel A1148 to A1158 id full range of the IfcSwitchingDeviceTypeEnum which is a property of IfcSwitchingDeviceType, so if we have ifcSwitchingDeviceType.Any() then we have covered this requirement
//note Ifc 2x4 has DIMMERSWITCH, KEYPAD, MOMENTARYSWITCH, SELECTORSWITCH not supported
if (ifcSwitchingDeviceType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
//IfcUnitaryControlElement/IfcUnitaryControlElementType is Ifc 2x4, not supported at this time.A1235
//IfcValve is Ifc 2x4, not supported at this time. A1327
//try Ifc2x3 type
var ifcValveType = ifcFlowController.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcValveType>(); //Excel cell ref A1327
//Excel A1305 to A1326 id full range of the IfcValveTypeEnum which is a property of IfcValveType, so if we have ifcValveType.Any() then we have covered this requirement
if (ifcValveType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.Plumbing | COBieMergeRoles.FireProtection);
}
return _mergeDefault;
}
public bool Merge(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
Type ifcType = ifcElement.GetType();
if (FilterTypes.Contains(ifcType)) //ok we have possible merge
{
switch (ifcType.Name)
{
case "IfcBuildingElementPart":
return BuildingElementPart(ifcElement, fileRoles);
case "IfcCovering":
return Covering(ifcElement, fileRoles);
case "IfcDistributionControlElement":
return DistributionControlElement(ifcElement, fileRoles);
case "IfcDistributionFlowElement":
return DistributionFlowElement(ifcElement, fileRoles);
case "IfcDoor":
return Door(ifcElement, fileRoles);
case "IfcEnergyConversionDevice":
return EnergyConversionDevice(ifcElement, fileRoles);
case "IfcFlowController":
case "IfcElectricDistributionPoint": //specific flow controller;
return FlowController(ifcElement, fileRoles);
case "IfcFlowFitting":
return FlowFitting(ifcElement, fileRoles);
case "IfcFlowMovingDevice":
return FlowMovingDevice(ifcElement, fileRoles);
case "IfcFlowStorageDevice":
return FlowStorageDevice(ifcElement, fileRoles);
case "IfcFlowTerminal":
return FlowTerminal(ifcElement, fileRoles);
case "IfcFlowTreatmentDevice":
return FlowTreatmentDevice(ifcElement, fileRoles);
case "IfcFurnishingElement":
return FurnishingElement(ifcElement, fileRoles);
case "IfcRoof":
return Roof(ifcElement, fileRoles);
case "IfcWindow":
return Window(ifcElement, fileRoles);
case "IfcTransportElement":
return TransportElement(ifcElement, fileRoles);
default:
return false;
}
}
return true; //not a filter type so ok to add
}
/// <summary>
/// See if we need to merge comparing the file roles to the merge ifcType roles
/// </summary>
/// <param name="fileRoles">Roles associated with the file, COBieMergeRoles</param>
/// <param name="mergeRoles">Roles associated with the ifcType, COBieMergeRoles</param>
/// <returns></returns>
private bool MatchRoles (COBieMergeRoles fileRoles, COBieMergeRoles mergeRoles)
{
foreach (COBieMergeRoles role in Enum.GetValues(typeof(COBieMergeRoles)))
{
if ((fileRoles.HasFlag(role)) && (mergeRoles.HasFlag(role)))
return true;
}
return false;
}
private bool DistributionControlElement(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcDistributionControlElement ifcDistributionControlElement = ifcElement as IfcDistributionControlElement;
if (ifcDistributionControlElement != null) //Excel row 3 to 11, 12 to 13 is Ifc2x4 which is not implemented in Xbim at this time
{
var ifcActuatorType = ifcDistributionControlElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcActuatorType>(); //Excel cell ref E4
//Excel A6 to A11 id full range of the IfcActuatorTypeEnum which is a property of IfcActuatorType, so if we have ifcActuatorType.Any() then we have covered this requirement
if (ifcActuatorType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.Electrical | COBieMergeRoles.Plumbing | COBieMergeRoles.FireProtection);
//IfcDistributionControlElementType is ignored as this is the parent class of the ifcAlarmType, IfcActuatorType, IfcControllerType, IfcSensorType and IfcFlowInstrumentType (IfcFlowInstrumentType, which has no reference in excel sheet)
var ifcAlarmType = ifcDistributionControlElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcAlarmType>(); //Excel cell ref E43
//Excel A50 to A57 id full range of the IfcAlarmTypeEnum which is a property of IfcAlarmType, so if we have ifcAlarmType.Any() then we have covered this requirement
if (ifcAlarmType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.Electrical | COBieMergeRoles.FireProtection);
//IfcDistributionControlElementType see note above
var ifcControllerType = ifcDistributionControlElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcControllerType>(); //Excel cell ref E241
//Excel A242 to A249 id full range of the IfcControllerTypeEnum which is a property of IfcControllerType, so if we have ifcControllerType.Any() then we have covered this requirement
if (ifcControllerType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.Electrical | COBieMergeRoles.Plumbing | COBieMergeRoles.FireProtection);
//down as ? in excel sheet, but assume this i think A751
var ifcFlowInstrumentType = ifcDistributionControlElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcFlowInstrumentType>(); //Excel cell ref E751
//Excel A742 to A750 id full range of the IfcFlowInstrumentTypeEnum which is a property of IfcFlowInstrumentType, so if we have ifcFlowInstrumentType.Any() then we have covered this requirement
if (ifcFlowInstrumentType.Any())
{
switch (ifcFlowInstrumentType.First().PredefinedType)
{
case IfcFlowInstrumentTypeEnum.PRESSUREGAUGE:
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
case IfcFlowInstrumentTypeEnum.THERMOMETER:
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
case IfcFlowInstrumentTypeEnum.AMMETER:
case IfcFlowInstrumentTypeEnum.FREQUENCYMETER:
case IfcFlowInstrumentTypeEnum.POWERFACTORMETER:
case IfcFlowInstrumentTypeEnum.PHASEANGLEMETER:
case IfcFlowInstrumentTypeEnum.VOLTMETER_PEAK:
case IfcFlowInstrumentTypeEnum.VOLTMETER_RMS:
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
case IfcFlowInstrumentTypeEnum.NOTDEFINED:
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
case IfcFlowInstrumentTypeEnum.USERDEFINED:
return _mergeDefault;
default:
return _mergeDefault;
}
}
//IfcDistributionControlElementType see note above
var ifcSensorType = ifcDistributionControlElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcSensorType>(); //Excel cell ref E241
//Excel E1060 to E1080 , CONDUCTANCESENSOR, CONTACTSENSOR, IONCONCENTRATIONSENSOR, LEVELSENSOR, PHSENSOR, RADIATIONSENSOR, RADIOACTIVITYSENSOR, WINDSENSOR - IFC2x4(not supported)
//sheet shows nothing for IFC2x3, assumed that if the IfcSensorTypeEnum (ifc2x3) contains any of the ifc2x4 items that the rule would hold.
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.FIRESENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.FireProtection);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.FLOWSENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.GASSENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.HEATSENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.FireProtection);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.HUMIDITYSENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.LIGHTSENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.MOISTURESENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.MOVEMENTSENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.PRESSURESENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.Electrical);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.SMOKESENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.SOUNDSENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.Electrical | COBieMergeRoles.FireProtection);
if (ifcSensorType.Where(st => st.PredefinedType == IfcSensorTypeEnum.TEMPERATURESENSOR).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.Electrical );
//assume if any flow controller is attached then set roles below
var ifcFlowControllers = ifcDistributionControlElement.AssignedToFlowElement.Select(rfcl => rfcl.RelatingFlowElement).OfType<IfcFlowController>(); //Excel cell ref E3
if (ifcFlowControllers.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.Electrical | COBieMergeRoles.Plumbing | COBieMergeRoles.FireProtection);
}
return _mergeDefault;
}
private bool BuildingElementPart(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcBuildingElementPart ifcBuildingElementPart = ifcElement as IfcBuildingElementPart;
if (ifcBuildingElementPart != null)
{
//IfcCoolingTowerType is not a class of IfcBuildingElementType, but IfcEnergyConversionDeviceType so moved to EnergyConversionDevice() method
//IfcShadingDevice/IfcShadingDeviceType is Ifc 2x4, not supported at this time. A1093
}
return _mergeDefault;
}
private bool Covering(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcCovering ifcCovering = ifcElement as IfcCovering;
if (ifcCovering != null)
{
var ifcCoveringType = ifcCovering.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcCoveringType>(); //Excel cell ref A426
//Excel A276 to A285 id full range of the IfcCoveringTypeEnum which is a property of IfcCoveringType, so if we have ifcCoveringType.Any() then we have covered this requirement
if (ifcCoveringType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Architectural);
//assume any covering is Architectural
return MatchRoles(fileRoles, COBieMergeRoles.Architectural);
}
return _mergeDefault;
}
private bool DistributionFlowElement(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcDistributionFlowElement ifcDistributionFlowElement = ifcElement as IfcDistributionFlowElement;
if (ifcDistributionFlowElement != null)
{
//IfcTubeBundle is Ifc 2x4, not supported at this time. A1284
//as stored in Ifc 2x3
var ifcTubeBundleType = ifcDistributionFlowElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcTubeBundleType>(); //Excel cell ref A1284
//Excel A1282 to A1283 id full range of the IfcTubeBundleTypeEnum which is a property of IfcTubeBundleType, so if we have ifcTubeBundleType.Any() then we have covered this requirement
if (ifcTubeBundleType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
//IfcTankType is Ifc 2x4, IfcTankTypeEnum has more values, not supported at this time. A1252
//as stored in Ifc 2x3
var ifcTankType = ifcDistributionFlowElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcTankType>(); //Excel cell ref A1252
//Excel A1244 to A1251 id full range of the IfcTankTypeEnum(2x4) assume that 2x3 full values OK which is a property of IfcTankType, so if we have ifcTankType.Any() then we have covered this requirement
if (ifcTankType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
//IfcFlowMeter is Ifc 2x4, IfcFlowMeterTypeEnum has less values, not supported at this time. A758
//as stored in Ifc 2x3
var ifcFlowMeterType = ifcDistributionFlowElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcFlowMeterType>(); //Excel cell ref A758
//Excel A753 to A757 id full range of the IfcFlowMeterTypeEnum(2x4) assume that 2x3 full values OK which is a property of IfcFlowMeterType, so if we have IfcFlowMeterType.Any() then we have covered this requirement
if (ifcFlowMeterType.Any())
{
switch (ifcFlowMeterType.First().PredefinedType)
{
case IfcFlowMeterTypeEnum.ELECTRICMETER:
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
case IfcFlowMeterTypeEnum.ENERGYMETER:
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
case IfcFlowMeterTypeEnum.FLOWMETER:
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical); //assume this from name
case IfcFlowMeterTypeEnum.GASMETER:
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
case IfcFlowMeterTypeEnum.OILMETER:
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
case IfcFlowMeterTypeEnum.WATERMETER:
return MatchRoles(fileRoles, COBieMergeRoles.Plumbing);
case IfcFlowMeterTypeEnum.USERDEFINED:
return _mergeDefault;
case IfcFlowMeterTypeEnum.NOTDEFINED:
return false;
default:
return _mergeDefault;
}
}
}
return _mergeDefault;
}
private bool Window(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
//IfcWindow is Ifc 2x4 with IfcWindowTypeEnum property .PredefinedType , not supported at this time. A823
IfcWindow ifcWindow = ifcElement as IfcWindow;
if (ifcWindow != null)//A1389
{
//assume any window will want to be in Architectural
return MatchRoles(fileRoles, COBieMergeRoles.Architectural);
}
return _mergeDefault;
}
private bool Roof(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcRoof ifcRoof = ifcElement as IfcRoof;
if (ifcRoof != null)//A1045
{
//no type Ifc entity, here the IfcRoofTypeEnum is the ShapeType property of the ifcRoof
//Excel A1030 to A1044 id full range of the IfcRoofTypeEnum then we have covered this requirement
return MatchRoles(fileRoles, COBieMergeRoles.Architectural);
}
return _mergeDefault;
}
private bool FlowFitting(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcFlowFitting ifcFlowFitting = ifcElement as IfcFlowFitting;
if (ifcFlowFitting != null)
{
//IfcInterceptor/IfcInterceptorType is Ifc 2x4, not supported at this time.A859
var ifcJunctionBoxType = ifcFlowFitting.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcJunctionBoxType>(); //Excel cell ref A864
//Excel A851 to A863 id full range of the IfcJunctionBoxType which is a property of IfcJunctionBoxType.
//ifcJunctionBoxTypeEnum for Ifc2x3 does not hold "POWER" or "DATA", but lets assume that if we have the type we have the merge requirement
if (ifcJunctionBoxType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
}
return _mergeDefault;
}
private bool FlowMovingDevice(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcFlowMovingDevice ifcFlowMovingDevice = ifcElement as IfcFlowMovingDevice;
if (ifcFlowMovingDevice != null)
{
var ifcCompressorType = ifcFlowMovingDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcCompressorType>(); //Excel cell ref A219
//Excel A187 to A202 id full range of the IfcCompressorTypeEnum which is a property of IfcCompressorType, so if we have ifcCompressorType.Any() then we have covered this requirement
if (ifcCompressorType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
var ifcFanType = ifcFlowMovingDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcFanType>(); //Excel cell ref A710
//Excel A702 to A709 id full range of the IfcFanTypeEnum which is a property of IfcFanType, so if we have ifcFanType.Any() then we have covered this requirement
if (ifcFanType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical );
var ifcPumpType = ifcFlowMovingDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcPumpType>(); //Excel cell ref A999
//Excel A991 to A998 id full range of the IfcPumpTypeEnum which is a property of IfcPumpType, so if we have ifcPumpType.Any() then we have covered this requirement
if (ifcPumpType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.Plumbing | COBieMergeRoles.FireProtection);
}
return _mergeDefault;
}
private bool FlowStorageDevice(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
IfcFlowStorageDevice ifcFlowStorageDevice = ifcElement as IfcFlowStorageDevice;
if (ifcFlowStorageDevice != null)
{
//IfcElectricFlowStorageDevice is Ifc 2x4, not supported at this time. A644,
//as stored in Ifc2x3
var ifcElectricFlowStorageDeviceType = ifcFlowStorageDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcElectricFlowStorageDeviceType>(); //Excel cell ref A644
//Excel A639 to A643 id full range of the IfcElectricFlowStorageDeviceType which is a property of IfcElectricFlowStorageDeviceType, so if we have ifcElectricFlowStorageDeviceType.Any() then we have covered this requirement
if (ifcElectricFlowStorageDeviceType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
}
return _mergeDefault;
}
private bool FlowTerminal(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcFlowTerminal ifcFlowTerminal = ifcElement as IfcFlowTerminal;
if (ifcFlowTerminal != null)
{
var ifcAirTerminalType = ifcFlowTerminal.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcAirTerminalType>(); //Excel cell ref E26
//Excel E21 to E25 part range of the IfcAirTerminalTypeEnum which is a property of IfcAirTerminalType, so if we have ifcAirTerminalType.Any() then we need to test the requirement
//Note: IfcAirTerminalTypeEnum.LOUVRE is Ifc 2x4, not supported
if (ifcAirTerminalType.Any())
{
//if (ifcAirTerminalType.Where(att => att.PredefinedType == IfcAirTerminalTypeEnum.DIFFUSER).Any())
// return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
//if (ifcAirTerminalType.Where(att => att.PredefinedType == IfcAirTerminalTypeEnum.GRILLE).Any())
// return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
//if (ifcAirTerminalType.Where(att => att.PredefinedType == IfcAirTerminalTypeEnum.REGISTER).Any())
// return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
//if (ifcAirTerminalType.Where(att => att.PredefinedType == IfcAirTerminalTypeEnum.NOTDEFINED).Any())
// return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical); //as Ifc 2x4 covers all enumeration, assume Ifc 2x3 covers all enumeration
}
var ifcElectricApplianceType = ifcFlowTerminal.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcElectricApplianceType>(); //Excel cell ref E618
//Excel E594 to E617 part range of the ifcElectricApplianceTypeEnum which is a property of ifcElectricApplianceType, so if we have ifcElectricApplianceType.Any() then we need to test the requirement
if (ifcElectricApplianceType.Any()) //although not all are in Excel sheet, I will assume that all should be based on types!!
{
//assume any user defined is lightly to be in the same role as generic type will be electrical
return MatchRoles(fileRoles, COBieMergeRoles.Electrical); //as Ifc 2x4 covers all enumeration, assume Ifc 2x3 covers all enumeration
}
//IfcAirTerminalBox is Ifc 2x4, not supported at this time. A33
//Try search on type
var ifcAirTerminalBoxType = ifcFlowTerminal.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcAirTerminalBoxType>(); //Excel cell ref A33
//Excel A23 to A32 part range of the IfcAirTerminalBoxTypeEnum which is a property of IfcAirTerminalBoxType, so if we have ifcAirTerminalBoxType.Any() then we have covered this requirement
if (ifcAirTerminalBoxType.Any())
{
//assume any user defined is lightly to be in the same role as generic type will be.
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
}
//IfcAudioVisualAppliance and IfcAudioVisualApplianceType is Ifc 2x4, not supported at this time. A80
//IfcCommunicationsAppliance and IfcCommunicationsApplianceType is Ifc 2x4, not supported at this time. A183
//IfcMedicalDevice is Ifc 2x4, not supported at this time. A303
//IfcLamp is Ifc 2x4, not supported at this time. A876
//Try search on type
var ifcLampType = ifcFlowTerminal.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcLampType>(); //Excel cell ref A876
//Excel A866 to A875 part range of the IfcLampTypeEnum which is a property of IfcLampType, so if we have ifcLampType.Any() then we have covered this requirement
if (ifcLampType.Any())
{
//assume any user defined is lightly to be in the same role as generic type will be.
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
}
//IfcLightFixture is Ifc 2x4, not supported at this time. A883
//Try search on type
var ifcLightFixtureType = ifcFlowTerminal.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcLightFixtureType>(); //Excel cell ref A876
//Excel A866 to A875 part range of the IfcLightFixtureTypeEnum which is a property of IfcLightFixtureType, so if we have ifcLightFixtureType.Any() then we have covered this requirement
if (ifcLightFixtureType.Any())
{
//assume any user defined is lightly to be in the same role as generic type will be.
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
}
//IfcOutlet is Ifc 2x4, not supported at this time. A941
//Try search on type
var ifcOutletType = ifcFlowTerminal.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcOutletType>(); //Excel cell ref A941
//Excel A935 to A940 part range of the IfcOutletTypeEnum which is a property of IfcOutletType, so if we have ifcOutletType.Any() then we have covered this requirement
if (ifcOutletType.Any())
{
//assume any user defined is lightly to be in the same role as generic type will be.
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
}
//IfcSanitaryTerminal is Ifc 2x4, not supported at this time. A1058
//Try search on type
var ifcSanitaryTerminalType = ifcFlowTerminal.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcSanitaryTerminalType>(); //Excel cell ref A1058
//Excel A1047 to A1057 part range of the IfcSanitaryTerminalTypeEnum which is a property of IfcSanitaryTerminalType, so if we have ifcSanitaryTerminalType.Any() then we have covered this requirement
if (ifcSanitaryTerminalType.Any())
{
//assume any user defined is lightly to be in the same role as generic type will be.
return MatchRoles(fileRoles, COBieMergeRoles.Plumbing);
}
//IfcStackTerminal is Ifc 2x4, not supported at this time. A1119
//Try search on type
var ifcStackTerminalType = ifcFlowTerminal.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcStackTerminalType>(); //Excel cell ref A1119
//Excel A1115 to A1118 part range of the IfcStackTerminalTypeEnum which is a property of IfcStackTerminalType, so if we have ifcStackTerminalType.Any() then we have covered this requirement
if (ifcStackTerminalType.Any())
{
//assume any user defined is lightly to be in the same role as generic type will be.
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
}
//IfcWasteTerminal is Ifc 2x4, not supported at this time. A1369
//Try search on type
var ifcWasteTerminalType = ifcFlowTerminal.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcWasteTerminalType>(); //Excel cell ref A1119
//Excel A1361 to A1368 part range of the IfcWasteTerminalTypeEnum which is a property of IfcWasteTerminalType, so if we have ifcWasteTerminalType.Any() then we have covered this requirement
if (ifcWasteTerminalType.Any())
{
//assume any user defined is lightly to be in the same role as generic type will be.
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.Plumbing);
}
}
return _mergeDefault;
}
private bool FlowTreatmentDevice(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
IfcFlowTreatmentDevice ifcFlowTreatmentDevice = ifcElement as IfcFlowTreatmentDevice;
if (ifcFlowTreatmentDevice != null)
{
//IfcFilter is Ifc 2x4, not supported at this time. A723
//as stored in Ifc 2x3
var ifcFilterType = ifcFlowTreatmentDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcFilterType>(); //Excel cell ref A723
//Excel A716 to A722 id full range of the IfcFilterTypeEnum which is a property of IfcFilterType, so if we have ifcFilterType.Any() then we have covered this requirement
if (ifcFilterType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
//IfcFireSuppressionTerminal is Ifc 2x4, not supported at this time. A733
//Try search on type
var ifcFireSuppressionTerminalType = ifcFlowTreatmentDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcFireSuppressionTerminalType>(); //Excel cell ref A733
//Excel A716 to A722 id full range of the IfcFireSuppressionTerminalTypeEnum which is a property of IfcFireSuppressionTerminalType, so if we have ifcFireSuppressionTerminalType.Any() then we have covered this requirement
if (ifcFireSuppressionTerminalType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical | COBieMergeRoles.FireProtection);
//IfcHumidifier is Ifc 2x4, not supported at this time. A850
//Try search on type
var ifcHumidifierType = ifcFlowTreatmentDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcHumidifierType>(); //Excel cell ref A850
//Excel A935 to A849 id full range of the IffcHumidifierTypeEnum which is a property of IfcHumidifierType, so if we have ifcFireSuppressionTerminalType.Any() then we have covered this requirement
if (ifcHumidifierType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
}
return _mergeDefault;
}
private bool FurnishingElement(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
IfcFurnishingElement ifcFurnishingElement = ifcElement as IfcFurnishingElement;
if (ifcFurnishingElement != null)
{
//IfcFurniture is Ifc 2x4, not supported at this time. A823
//as stored in Ifc 2x3
var ifcFurnitureType = ifcFurnishingElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcFurnitureType>(); //Excel cell ref A723
if (ifcFurnitureType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Architectural);
//IfcSystemFurnitureElement is Ifc 2x4, not supported at this time. A828
//as stored in Ifc 2x3
var ifcSystemFurnitureElementType = ifcFurnishingElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcSystemFurnitureElementType>(); //Excel cell ref A723
if (ifcSystemFurnitureElementType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Architectural);
}
return _mergeDefault;
}
private bool EnergyConversionDevice(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcEnergyConversionDevice ifcEnergyConversionDevice = ifcElement as IfcEnergyConversionDevice;
if (ifcEnergyConversionDevice != null)
{
List<string> testStrings = new List<string>() { "Furnaces", "Fuel-Fired Heaters", "Heat Exchangers for HVAC", "Refrigerant Condensers", "Packaged Water Chillers", "Cooling Towers", "Evaporative Air-Cooling Equipment" }; //A667 to A673
var ifcEnergyConversionDeviceType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcEnergyConversionDeviceType>(); //Excel cell ref A674
if (ifcEnergyConversionDeviceType.Where(ecdt => testStrings.Contains(ecdt.ElementType)).Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
var ifcAirToAirHeatRecoveryType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcAirToAirHeatRecoveryType>(); //Excel cell ref A46
//Excel A36 to A45 id full range of the IfcAirToAirHeatRecoveryTypeEnum which is a property of IfcAirToAirHeatRecoveryType, so if we have ifcAirToAirHeatRecoveryType.Any() then we have this requirement
if (ifcAirToAirHeatRecoveryType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
var ifcBoilerType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcBoilerType>(); //Excel cell ref A88
//Excel A91 to A34 id full range of the IfcBoilerTypeEnum which is a property of IfcBoilerType, so if we have ifcBoilerType.Any() then we have this requirement
if (ifcBoilerType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
//IfcBurnerType is Ifc 2x4, not supported at this time. A107
var ifcChillerType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcChillerType>(); //Excel cell ref A144
//Excel A135 to A139 id full range of the IfcChillerTypeEnum which is a property of IfcChillerType, so if we have IfcChillerType.Any() then we have this requirement
if (ifcChillerType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
var ifcCoilType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcCoilType>(); //Excel cell ref A165
//Excel A143 to A156 id full range of the IfcCoilTypeEnum which is a property of IfcCoilType, so if we have IfcCoilType.Any() then we have this requirement
if (ifcCoilType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
var ifcCondenserType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcCondenserType>(); //Excel cell ref A238
//Excel A222 to A223 id full range of the IfcCondenserTypeEnum which is a property of IfcCondenserType, so if we have ifcCondenserType.Any() then we have this requirement
if (ifcCondenserType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
var ifcElectricGeneratorType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcElectricGeneratorType>(); //Excel cell ref A650
//Excel A646 to A649 id full range of the IfcElectricGeneratorTypeEnum which is a property of IfcElectricGeneratorType, so if we have ifcElectricGeneratorType.Any() then we have this requirement
if (ifcElectricGeneratorType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
var ifcElectricMotorType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcElectricMotorType>(); //Excel cell ref A650
//Excel A652 to A657 id full range of the IfcElectricMotorTypeEnum which is a property of IfcElectricMotorType, so if we have ifcElectricMotorType.Any() then we have this requirement
if (ifcElectricMotorType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
//IfcEngineType is Ifc 2x4, not supported at this time. A673
var ifcEvaporativeCoolerType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcEvaporativeCoolerType>(); //Excel cell ref A691
//Excel A681 to A690 id full range of the IfcEvaporativeCoolerTypeEnum which is a property of IfcEvaporativeCoolerType, so if we have ifcEvaporativeCoolerType.Any() then we have this requirement
if (ifcEvaporativeCoolerType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
var ifcEvaporatorType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcEvaporatorType>(); //Excel cell ref A700
//Excel A693 to A699 id full range of the IfcEvaporatorTypeEnum which is a property of IfcEvaporatorType, so if we have ifcEvaporatorType.Any() then we have this requirement
if (ifcEvaporatorType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
var ifcMotorConnectionType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcMotorConnectionType>(); //Excel cell ref A933
//Excel A929 to A932 id full range of the IfcMotorConnectionTypeEnum which is a property of IfcMotorConnectionType, so if we have ifcMotorConnectionType.Any() then we have this requirement
if (ifcMotorConnectionType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
//IfcSolarDeviceType is Ifc 2x4, not supported at this time. A1108
//IfcSpaceHeater is Ifc 2x4, not supported at this time. A1113
var ifcTransformerType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcTransformerType>(); //Excel cell ref A1260
//Excel A1254 to A1259 id full range of the IfcTransformerTypeEnum which is a property of IfcTransformerType, so if we have ifcTransformerType.Any() then we have this requirement
if (ifcTransformerType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
var ifcUnitaryEquipmentType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcUnitaryEquipmentType>(); //Excel cell ref A1303
//Excel A1297 to A1302 id full range of the IfcUnitaryEquipmentTypeEnum which is a property of IfcUnitaryEquipmentType, so if we have ifcUnitaryEquipmentType.Any() then we have this requirement
if (ifcUnitaryEquipmentType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
var ifcHeatExchangerType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcHeatExchangerType>(); //Excel cell ref A833
//Excel A830 to A832 id full range of the IfcHeatExchangerTypeEnum which is a property ofIfcHeatExchangerType so if we have ifcHeatExchangerType.Any() then we have this requirement
if (ifcHeatExchangerType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
var ifcCoolingTowerType = ifcEnergyConversionDevice.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcCoolingTowerType>(); //Excel cell ref A272
//Excel A263 to A267 id full range of the IfcCoolingTowerTypeEnum which is a property of IfcCoolingTowerType, so if we have ifcCoolingTowerType.Any() then we have this requirement
if (ifcCoolingTowerType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Mechanical);
}
return _mergeDefault;
}
private bool Door(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcDoor ifcDoor = ifcElement as IfcDoor;
if (ifcDoor != null)
{
var ifcDoorStyle = ifcDoor.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcDoorStyle>(); //Excel cell ref A543
//Excel A480 to A507 id full range of the IfcDoorStyleOperationEnum/IfcDoorStyleConstructionEnum which are properties of IfcDoorStyle, so if we have ifcDoorStyle.Any() then we have covered this requirement
if (ifcDoorStyle.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Architectural);
}
return _mergeDefault;
}
/// <summary>
/// Validate component sheet for merge types depending on the role of the model this worksheet was built from
/// </summary>
/// <param name="model">model the cobie file was generated from</param>
/// <param name="fileRoles">the file roles</param>
public List <string> ValidateComponentMerge(XbimModel model, COBieMergeRoles fileRoles)
{
List <string> typeObjectGlobalId = new List <string>();
List <string> typeObjectGlobalIdKeep = new List <string>();
//RowsRemoved.Clear();
if (fileRoles != COBieMergeRoles.Unknown) //if role is a single value of unknown then do no merging
{
COBieColumn colExtObj = Columns.Where(c => c.Value.ColumnName == "ExtObject").Select(c => c.Value).FirstOrDefault();
COBieColumn colExtId = Columns.Where(c => c.Value.ColumnName == "ExtIdentifier").Select(c => c.Value).FirstOrDefault();
List <IfcElement> elements = model.InstancesLocal.OfType <IfcElement>().ToList(); //get all IfcElements,
List <T> RemainRows = new List <T>();
if (colExtObj != null)
{
FilterValuesOnMerge mergeHelper = new FilterValuesOnMerge();
for (int i = 0; i < Rows.Count; i++)
{
COBieRow row = Rows[i];//.ElementAt(i);
COBieCell cell = row[colExtObj.ColumnOrder];
string extObject = cell.CellValue;
if (mergeHelper.Merge(extObject)) //object can be tested on
{
COBieCell cellExtId = row[colExtId.ColumnOrder];
string extId = cellExtId.CellValue;
IfcElement IfcElement = elements.Where(ie => ie.GlobalId.ToString() == extId).FirstOrDefault();
if (IfcElement != null)
{
//we need to remove the ObjectType from the type sheet
IfcRelDefinesByType elementDefinesByType = IfcElement.IsDefinedBy.OfType <IfcRelDefinesByType>().FirstOrDefault(); //should be only one
IfcTypeObject elementType = null;
if (elementDefinesByType != null)
{
elementType = elementDefinesByType.RelatingType;
}
if (mergeHelper.Merge(IfcElement, fileRoles))
{
RemainRows.Add((T)row);
if ((elementType != null) && (!typeObjectGlobalIdKeep.Contains(elementType.GlobalId)))
{
typeObjectGlobalIdKeep.Add(elementType.GlobalId);
}
}
else
{
RowsRemoved.Add((T)row);
if ((elementType != null) && (!typeObjectGlobalId.Contains(elementType.GlobalId)))
{
typeObjectGlobalId.Add(elementType.GlobalId);
}
}
}
else
{
RemainRows.Add((T)row); //cannot evaluate IfcType so keep
}
}
}
Rows = RemainRows;
}
}
typeObjectGlobalId.RemoveAll(Id => typeObjectGlobalIdKeep.Contains(Id)); //ensure we remove any type we have kept from the type object GlobalId list (ones to remove)
return(typeObjectGlobalId);
}
private bool TransportElement(IfcElement ifcElement, COBieMergeRoles fileRoles)
{
//using merge rules defined in 2012-03-27-IFCObjects-DRAFT-CDMergeRules-v04.xlsx
IfcTransportElement ifcTransportElement = ifcElement as IfcTransportElement;
if (ifcTransportElement != null)
{
var ifcTransportElementType = ifcTransportElement.IsDefinedBy.OfType<IfcRelDefinesByType>().Select(rdbt => rdbt.RelatingType).OfType<IfcTransportElementType>(); //Excel cell ref A1280
//Excel A716 to A722 id full range of the IfcTransportElementEnum which is a property of IfcTransportElement, so if we have ifcTransportElement.Any() then we have covered this requirement
if (ifcTransportElementType.Any())
return MatchRoles(fileRoles, COBieMergeRoles.Electrical);
}
return _mergeDefault;
}
