public SWTableType(ModelDoc2 md, string tablehash)
{
_masterHash = tablehash;
_masterHashes[0] = _masterHash;
part = md;
swSelMgr = (SelectionMgr)part.SelectionManager;
if (part != null && swSelMgr != null)
{
BomFeature swBom = null;
try {
swBom = (BomFeature)swSelMgr.GetSelectedObject6(1, -1);
found_bom = swBom;
} catch {
//
}
if (swBom != null)
{
fill_table(swBom);
}
else
{
find_bom();
}
}
}
public BOMEventArgs(BomFeature bomf)
{
BOM = bomf;
//if (e.BOM is BomFeature) {
// m.AppendLine(string.Format(@"Selected {0}.", e.BOM.Name));
//}
}
private void find_bom()
{
bool found = false;
Feature feature = (Feature)part.FirstFeature();
if (part != null)
{
while (feature != null)
{
if (feature.GetTypeName2().ToUpper() == "BOMFEAT")
{
feature.Select2(false, -1);
BomFeature bom = (BomFeature)swSelMgr.GetSelectedObject6(1, -1);
fill_table(bom);
if (identify_table(_cols, _masterHashes))
{
found = true;
System.Diagnostics.Debug.WriteLine("Found a table.");
break;
}
}
feature = (Feature)feature.GetNextFeature();
}
}
if (!found)
{
throw new SWTableTypeException("I couldn't find the correct table.");
}
}
public void InsertBom()
{
SldWorks swApp = default(SldWorks);
ModelDoc2 swModel = default(ModelDoc2);
SelectionMgr swSelMgr = default(SelectionMgr);
FeatureManager swFeatMgr = default(FeatureManager);
SolidWorks.Interop.sldworks.View swView;
BomTableAnnotation swBomAnn = default(BomTableAnnotation);
BomFeature swBomFeat = default(BomFeature);
long anchorType = 0;
long bomType = 0;
string configuration = null;
string tableTemplate = null;
object visible = null;
DrawingDoc swDraw;
Sheet swSheet = default(Sheet);
//swApp = DirectCast(Marshal.GetActiveObject("SldWorks.Application"), SldWorks)
swApp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
swModel = swApp.ActiveDoc;
swFeatMgr = swModel.FeatureManager;
swDraw = (DrawingDoc)swModel;
swSheet = swDraw.GetCurrentSheet();
swModel.Extension.SetUserPreferenceString((int)swUserPreferenceStringValue_e.swDetailingLayer, (int)swUserPreferenceOption_e.swDetailingBillOfMaterial, "");
//ecли FALSE вставляются все конфигурации
swModel.Extension.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swOneConfigOnlyTopLevelBom, 0, false);
swModel.Extension.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swBomTableDontAddQTYNextToConfigName, 0, true);
swModel.Extension.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swDontCopyQTYColumnNameFromTemplate, 0, true);
//swDraw.SetUserPreferenceIntegerValue(swBomTableZeroQuantityDisplay, swZeroQuantityBlank);
//Select View
swModel.ClearSelection2(true);
swView = swDraw.GetCurrentSheet().GetViews()[0];
//Insert BOM Table
anchorType = (int)swBOMConfigurationAnchorType_e.swBOMConfigurationAnchor_TopLeft;
bomType = (int)swBomType_e.swBomType_TopLevelOnly;
swModel.ClearSelection2(true);
configuration = "";
tableTemplate = "C:\\Program Files\\SW-Complex\\Template.sldbomtbt";
swBomAnn = swView.InsertBomTable2(false, -0, -0, (int)anchorType, (int)bomType, configuration, tableTemplate);
swFeatMgr.UpdateFeatureTree();
swBomFeat = swBomAnn.BomFeature;
var Names = swBomFeat.GetConfigurations(false, visible);
visible = true;
swBomFeat.SetConfigurations(true, visible, Names);
}
///<summary> method <c>GetDrawingDocBOMTable</c>
///从SolidWorks 的Drawing文档获取到其材料明细表，一般一个文档一个，多余不获取
///</summary>
public void GetDrawingDocBOMTable(ModelDoc2 modelDoc, out BomTableAnnotation swBOMTable, out string configName, out string topFileName)
{
Feature feature = modelDoc.IFirstFeature();
swBOMTable = null;
configName = "";
topFileName = "";
BomFeature swBomFeat = null;
while (feature != null)
{
Type type = feature.GetType();
if ("BomFeat" == feature.GetTypeName())
{
//Console.WriteLine("******************************");
//Console.WriteLine("Feature Name : " + feature.Name);
swBomFeat = (BomFeature)feature.GetSpecificFeature2();
break;
}
string name = feature.Name;
feature = feature.IGetNextFeature();
}
if (swBomFeat == null || swBomFeat.GetTableAnnotationCount() <= 0)
{
return;
}
Feature swFeat = (Feature)swBomFeat.GetFeature();
string featureName = swFeat.Name;
swBOMTable = swBomFeat.IGetTableAnnotations(1);// default(TableAnnotation);
topFileName = swBomFeat.GetReferencedModelName();
int configCount = swBomFeat.GetConfigurationCount(true);
//
//object[] vTableArr = (object[])swBomFeat.GetTableAnnotations();
//foreach (object vTable_loopVariable in vTableArr)
//{
// object vTable = vTable_loopVariable;
// TableAnnotation swTable = (TableAnnotation)vTable;
// ProcessTableAnn(modelDoc, swTable);
//}
configName = "";
if (configCount > 0)
{
bool visibility = true;
configName = swBomFeat.IGetConfigurations(true, 0, ref visibility);
}
//swBOMTable.Iget
return;
}
int p_UserSelectionPostNotify()
{
ModelDoc2 md = (swApp.ActiveDoc as ModelDoc2);
DrawingDoc p = (swApp.ActiveDoc as DrawingDoc);
SelectionMgr sMgr = (SelectionMgr)md.SelectionManager;
if (sMgr.GetSelectedObject6(1, -1) is BomFeature)
{
BomFeature bomf = (BomFeature)sMgr.GetSelectedObject6(1, -1);
OnSelectedBOM(new AppendEventArgs(string.Format(@"Selected {0}.", bomf.Name)));
}
System.Runtime.InteropServices.Marshal.ReleaseComObject(sMgr);
System.Runtime.InteropServices.Marshal.ReleaseComObject(p);
System.Runtime.InteropServices.Marshal.ReleaseComObject(md);
System.Runtime.InteropServices.Marshal.ReleaseComObject(swApp);
return(0);
}
private void fill_table(BomFeature bom)
{
found_bom = bom;
string itno = string.Empty;
string ptno = string.Empty;
_cols.Clear();
_prts.Clear();
swTable = (ITableAnnotation)bom.IGetTableAnnotations(1);
part.ClearSelection2(true);
_col_count = swTable.ColumnCount;
find_part_column();
_row_count = swTable.RowCount;
for (int i = 0; i < _col_count; i++)
{
_cols.Add(swTable.get_DisplayedText(0, i));
}
object[] bomtaa = (object[])bom.GetTableAnnotations();
BomTableAnnotation bta = (BomTableAnnotation)bomtaa[0];
int prtcol = get_column_by_name(_part_column);
for (int i = 0; i < _row_count; i++)
{
string prt_ = swTable.get_DisplayedText(i, prtcol);
_prts.Add(prt_);
string[] pathnames = (string[])bta.GetModelPathNames(i, out itno, out ptno);
if (pathnames != null)
{
foreach (string pathname in pathnames)
{
FileInfo fi_ = new FileInfo(pathname);
path_list.Add(fi_);
if (!path_dict.ContainsKey(prt_.ToUpper()))
{
path_dict.Add(prt_.ToUpper(), fi_);
}
}
}
}
initialated = true;
}
private void fill_table(BomFeature bom)
{
_cols.Clear();
_prts.Clear();
swTable = (ITableAnnotation)bom.IGetTableAnnotations(1);
part.ClearSelection2(true);
_col_count = swTable.ColumnCount;
_row_count = swTable.RowCount;
for (int i = 0; i < _col_count; i++)
{
_cols.Add(swTable.get_DisplayedText(0, i));
}
int prtcol = get_column_by_name(_part_column);
for (int i = 0; i < _row_count; i++)
{
_prts.Add(swTable.get_DisplayedText(i, prtcol));
}
initialated = true;
}
///<summary> method <c>GetDrawingDocBOMTable</c>
///从SolidWorks 的Drawing文档获取到其材料明细表，一般一个文档一个，多余不获取
///</summary>
public void GetDrawingDocBOMTable(ModelDoc2 modelDoc, out BomTableAnnotation swBOMTable, out string configName, out string topFileName)
{
Feature feature = modelDoc.IFirstFeature();
swBOMTable = null;
configName = "";
BomFeature swBomFeat = null;
while (feature != null)
{
Type type = feature.GetType();
if ("BomFeat" == feature.GetTypeName())
{
Console.WriteLine("******************************");
Console.WriteLine("Feature Name : " + feature.Name);
swBomFeat = (BomFeature)feature.GetSpecificFeature2();
break;
}
string name = feature.Name;
feature = feature.IGetNextFeature();
}
if (swBomFeat == null || swBomFeat.GetTableAnnotationCount() <= 0)
{
return;
}
swBOMTable = swBomFeat.IGetTableAnnotations(1);// default(TableAnnotation);
topFileName = swBomFeat.GetReferencedModelName();
configName = "";
if (configCount > 0)
{
bool visibility = true;
configName = swBomFeat.IGetConfigurations(true, 0, ref visibility);
}
//swBOMTable.Iget
return;
}
public SWTableType(ModelDoc2 md, System.Collections.Specialized.StringCollection sc)
{
_masterHashes = sc;
part = md;
swSelMgr = (SelectionMgr)part.SelectionManager;
if (part != null && swSelMgr != null)
{
BomFeature swBom = null;
try {
swBom = (BomFeature)swSelMgr.GetSelectedObject6(1, -1);
} catch {
//
}
if (swBom != null)
{
fill_table(swBom);
}
else
{
find_bom();
}
}
}
/// <summary>
/// Returns Lists of Custom_parts and Standard_Parts
/// </summary>
/// <param name="swModel"></param>
/// <param name="swTableAnn"></param>
/// <param name="ConfigName"></param>
/// <param name="Standard_Parts"></param>
/// <param name="Custom_Parts"></param>
public static void Get_Sorted_Part_Data(ModelDoc2 swModel, BomFeature swBomFeat, List <BOM_Part_Informations> Standard_Parts, List <BOM_Part_Informations> Custom_Parts, string projectpath)
{
try
{
int nNumRow = 0;
int J = 0;
int I = 0;
int numStandard_Part = 1;
int numCustom_Part = 1;
int quantity = 0;
int index_description = 0;
int index_article_number = 0;
int index_supplier = 0;
BOM_Part_Informations part_informations;
string ItemNumber = null;
string PartNumber = null;
// Debug.Print(" Table Title " + swTableAnn.Title);
Feature swFeat = default(Feature);
object[] vTableArr = null;
object vTable = null;
string[] vConfigArray = null;
object vConfig = null;
string ConfigName = null;
string partconfig = null;
TableAnnotation swTable = default(TableAnnotation);
Annotation swAnnotation = default(Annotation);
object visibility = null;
swFeat = swBomFeat.GetFeature();
vTableArr = (object[])swBomFeat.GetTableAnnotations();
foreach (TableAnnotation vTable_loopVariable in vTableArr)
{
vTable = vTable_loopVariable;
swTable = (TableAnnotation)vTable;
vConfigArray = (string[])swBomFeat.GetConfigurations(true, ref visibility);
foreach (object vConfig_loopVariable in vConfigArray)
{
vConfig = vConfig_loopVariable;
ConfigName = (string)vConfig;
// MessageBox.Show(ConfigName);
// swTable.SaveAsPDF(@"C:\Users\alex\Desktop\test.pdf");
nNumRow = swTable.RowCount;
BomTableAnnotation swBOMTableAnn = default(BomTableAnnotation);
swBOMTableAnn = (BomTableAnnotation)swTable;
//swTable.GetColumnTitle
for (int h = 0; h < swTable.ColumnCount; h++)
{
switch (swTable.GetColumnTitle(h))
{
case "Benennung":
index_description = h;
break;
case "Artikelnummer":
index_article_number = h;
break;
case "Lieferant":
index_supplier = h;
break;
default:
break;
}
}
if (index_supplier != 0 || index_supplier != 0 || index_article_number != 0) //Standard BOM Template
{
for (int n = 0; n <= nNumRow - 1; n++)
{
// Debug.Print(" Row Number " + J + " Component Count : " + swBOMTableAnn.GetComponentsCount2(J, ConfigName, out ItemNumber, out PartNumber));
// Debug.Print(" Item Number : " + ItemNumber);
// Debug.Print(" Part Number : " + PartNumber);
// MessageBox.Show("bubu");
object[] vPtArr = null;
Component2 swComp = null;
object pt = null;
quantity = swBOMTableAnn.GetComponentsCount2(n, ConfigName, out ItemNumber, out PartNumber);
vPtArr = (object[])swBOMTableAnn.GetComponents2(n, ConfigName);
if (((vPtArr != null)))
{
for (I = 0; I <= vPtArr.GetUpperBound(0); I++)
{
pt = vPtArr[I];
swComp = (Component2)pt;
if ((swComp != null))
{
part_informations = new BOM_Part_Informations();
part_informations.manufacturer = swTable.get_Text(n, index_supplier);
part_informations.order_number = swTable.get_Text(n, index_article_number);
part_informations.IsAssembly = false;
part_informations.part_number = PartNumber.TrimStart();
part_informations.quantity = quantity.ToString();
//Custom part
if (swComp.GetPathName().Contains(projectpath))
{
if (swComp.GetPathName().Contains(".sldasm") || swComp.GetPathName().Contains(".SLDASM"))
{
// MessageBox.Show(swComp.GetPathName());
part_informations.IsAssembly = true;
}
part_informations.description = swComp.ReferencedConfiguration;
part_informations.item_number = numCustom_Part.ToString();
numCustom_Part++;
Custom_Parts.Add(part_informations);
break;
}
part_informations.description = swTable.get_Text(n, index_description);
part_informations.item_number = numStandard_Part.ToString();
numStandard_Part++;
Standard_Parts.Add(part_informations);
break;
}
else
{
Debug.Print(" Could not get component.");
}
}
}
}
}
else //No Standard BOM Template
{
for (J = 0; J <= nNumRow - 1; J++)
{
// Debug.Print(" Row Number " + J + " Component Count : " + swBOMTableAnn.GetComponentsCount2(J, ConfigName, out ItemNumber, out PartNumber));
// Debug.Print(" Item Number : " + ItemNumber);
// Debug.Print(" Part Number : " + PartNumber);
object[] vPtArr = null;
Component2 swComp = null;
object pt = null;
quantity = swBOMTableAnn.GetComponentsCount2(J, ConfigName, out ItemNumber, out PartNumber);
vPtArr = (object[])swBOMTableAnn.GetComponents2(J, ConfigName);
if (((vPtArr != null)))
{
for (I = 0; I <= vPtArr.GetUpperBound(0); I++)
{
pt = vPtArr[I];
swComp = (Component2)pt;
if ((swComp != null))
{
part_informations = new BOM_Part_Informations();
part_informations.description = swComp.ReferencedConfiguration;
part_informations.part_number = PartNumber;
part_informations.quantity = quantity.ToString();
//Custom part
if (swComp.GetPathName().Contains(projectpath))
{
if (swComp.GetPathName().Contains(".sldasm") || swComp.GetPathName().Contains(".SLDASM"))
{
break;
}
else
{
part_informations.item_number = numCustom_Part.ToString();
numCustom_Part++;
Custom_Parts.Add(part_informations);
break;
}
}
part_informations.item_number = numStandard_Part.ToString();
numStandard_Part++;
Standard_Parts.Add(part_informations);
break;
}
else
{
Debug.Print(" Could not get component.");
}
}
}
}
}
break;
}
}
swAnnotation = swTable.GetAnnotation();
swAnnotation.Select3(false, null);
swModel.EditDelete();
}
catch (Exception ex)
{
MessageBox.Show(ex.Message + ex.StackTrace);
}
}
public void GetXMLfromBOM()
{
swapp = (SldWorks)Marshal.GetActiveObject("SldWorks.Application");
swmodel = swapp.ActiveDoc;
swModelDocExt = swmodel.Extension;
//создаем MemoryStream, в который будем писать XML
var myMemoryStream = new MemoryStream();
//создаем XmlTextWriter, указываем объект – myMemoryStream, в который будем писать XML, и кодировку
try
{
var myXml = new System.Xml.XmlTextWriter("C:\\Program Files\\SW-Complex\\SP-Temp.xml", System.Text.Encoding.UTF8);
swDraw = (DrawingDoc)swmodel;
vSheetNames = swDraw.GetSheetNames();
ok = swDraw.ActivateSheet(vSheetNames[0]);
swView = swDraw.GetFirstView();
// Получаем параметры модели
swView = swView.GetNextView();
swmodel = swView.ReferencedDocument;
//swSelMgr = swDraw.SelectionManager;
myXml.WriteStartDocument();
myXml.Formatting = System.Xml.Formatting.Indented;
//длина отступа
myXml.Indentation = 2;
vConfName = swmodel.GetConfigurationNames();
swapp = new SldWorks();
swmodel = swapp.ActiveDoc;
Feature swFeat = swmodel.FirstFeature();
while ((swFeat != null))
{
if (swFeat.GetTypeName() == "BomFeat")
{
swFeat.Select(true);
swBomFeature = swFeat.GetSpecificFeature2();
}
swFeat = swFeat.GetNextFeature();
}
//////////////////////////////////////////////////////
//
// GetPropertyBomTableFromDrawDoc
//
//////////////////////////////////////////////////////
object vConfigurations = null;
object vVisibility = null;
bool bGetVisible = false;
long lNumRow = 0;
long lNumColumn = 0;
int lRow = 0;
TableAnnotation swTableAnnotation = default(TableAnnotation);
ModelDoc2 swDocument = default(ModelDoc2);
AssemblyDoc swAssembly = default(AssemblyDoc);
int lStartRow = 0;
string strItemNumber = "";
string strPartNumber = "";
string strDescription = "";
var strDocumentName = swBomFeature.GetReferencedModelName();
swDocument = swapp.GetOpenDocumentByName(strDocumentName);
swAssembly = (AssemblyDoc)swDocument;
//swBOMTableAnnotation = swBomFeature.GetTableAnnotations(0)
var swBomTableAnnotation = (BomTableAnnotation)swBomFeature.GetTableAnnotations()[0];
swTableAnnotation = (TableAnnotation)swBomTableAnnotation;
lNumRow = swTableAnnotation.RowCount;
lNumColumn = swTableAnnotation.ColumnCount;
lStartRow = 1;
//If (Not (swTableAnnotation.TitleVisible = False)) Then
if (swTableAnnotation.TitleVisible == false)
{
lStartRow = 2;
}
bGetVisible = false;
vConfigurations = swBomFeature.GetConfigurations(bGetVisible, vVisibility);
//swTableAnnotation = swTableAnnotation;
///////////////////////////////////////////////////////////////////
swSheet = swDraw.GetCurrentSheet();
strActiveSheetName = swSheet.GetName();
vSheetNames = swDraw.GetSheetNames();
ok = swDraw.ActivateSheet(vSheetNames[0]);
swSheet = swDraw.GetCurrentSheet();
swView = swDraw.GetFirstView();
if (swSheet.CustomPropertyView == "По умолчанию" | swSheet.CustomPropertyView == "Default")
{
swView = swView.GetNextView();
}
// get custom property
var valout = ""; //Обозначение
var valout1 = ""; //Наименование
CustomPropertyManager swCustProp = default(CustomPropertyManager);
var resolvedValOut = "";
var resolvedValOut1 = "";
//string resolvedValOut3 = "";
//string resolvedValOut4 = "";
//string resolvedValOut5 = "";
swCustProp = swmodel.Extension.CustomPropertyManager[""];
swCustProp.Get2("Обозначение", out valout, out resolvedValOut);
swCustProp.Get2("Description", out valout1, out resolvedValOut1);
// переменные для колонок
int Jj = 0; // наименование
int aa = 0; // раздел
int oo = 0; // обозначение
int tt = 0; // формат
int yy = 0; //
int uu = 0; // Код материала
int ss = 0; // Примечание
string sRowStr = null; // наименовани
string sRowStr1 = null; // раздел
string sRowStr2 = null; // обозначение
string sRowStr3 = null; // формат
string sRowStr4 = null; // ERP code
string sRowStr5 = null; // Код материала
string sRowStr6 = null; // Примечание
// При выборе электромонтажа
string Complect = "";
if (addinform.ChkElectro1.Checked)
{
Complect = "МЭ";
}
else if (addinform.ChkElectro2.Checked)
{
Complect = "ТБ";
}
////////////////////////////////////////////////////////////
//
// XML
//
////////////////////////////////////////////////////////////
//создаем элементы
myXml.WriteStartElement("xml");
//
myXml.WriteStartElement("Item");
// имя пути основного чертежа
myXml.WriteStartElement("PathName");
//записываем строку
myXml.WriteString(swmodel.GetPathName());
myXml.WriteEndElement();
// Устанавливаем ДОК из формы добавление
myXml.WriteStartElement("doc");
//
myXml.WriteStartElement("Обозначение");
//записываем строку
myXml.WriteString(resolvedValOut + "CБ");
myXml.WriteEndElement();
//
myXml.WriteStartElement("Наименование");
myXml.WriteString("Сборочный чертеж");
myXml.WriteEndElement();
//
myXml.WriteEndElement(); //doc
//dynamic CheckedRows2 = (from Rows in addinform.DGDoc.Rows.Cast<DataGridViewRow>()where Convert.ToBoolean(Rows.Cells(0).Value) == true).ToList;
dynamic CheckedRows2 = (from Rows in addinform.DGDoc.Rows.Cast <DataGridViewRow>() where Convert.ToBoolean(Rows.Cells[0].Value.ToString()) select Rows).ToList();
System.Text.StringBuilder sb = new System.Text.StringBuilder();
foreach (DataGridViewRow row in CheckedRows2)
{
sb.AppendLine(row.Cells[1].Value.ToString());
sb.ToString();
//Оставляем первые две буквы для обозначения разделитель
var literal = row.Cells[1].Value.ToString();
var substring = literal.Substring(0, 2);
var literal2 = row.Cells[1].Value.ToString();
var substring2 = literal2.Substring(5);
myXml.WriteStartElement("doc");
///
myXml.WriteStartElement("Обозначение");
//записываем строку
myXml.WriteString(resolvedValOut + substring);
myXml.WriteEndElement();
///
myXml.WriteStartElement("Наименование");
myXml.WriteString(substring2);
myXml.WriteEndElement();
///
myXml.WriteEndElement();
//doc
}
//<------------- Elec
if (addinform.ChkElectro.Checked == true & addinform.ChkElectro1.Checked == false & addinform.ChkElectro2.Checked == false)
{
myXml.WriteStartElement("Elec");
//Elec
myXml.WriteString("Устанавливают при электромонтаже");
myXml.WriteEndElement();
//Elec
}
//<------------- ChkElectro1
if (addinform.ChkElectro.Checked == true & addinform.ChkElectro1.Checked == true)
{
myXml.WriteStartElement("Elec");
//Elec
myXml.WriteString("Устанавливают по " + resolvedValOut + Complect);
myXml.WriteEndElement();
//Elec
}
//<------------- ChkElectro2
if (addinform.ChkElectro.Checked == true & addinform.ChkElectro2.Checked == true)
{
myXml.WriteStartElement("Elec");
//Elec
myXml.WriteString("Устанавливают по " + resolvedValOut + Complect);
myXml.WriteEndElement();
//Elec
}
//
myXml.WriteStartElement("Обозначение");
//записываем строку
myXml.WriteString(resolvedValOut);
myXml.WriteEndElement();
///
myXml.WriteStartElement("Наименование");
myXml.WriteString(resolvedValOut1);
myXml.WriteEndElement();
//\reference
myXml.WriteStartElement("references");
// ВЫГРУЖАЕМ ВЫБРАННЫЕ КОНФИГУРАЦИИ
dynamic CheckedRows = (from Rows in DataGridConfig.Rows.Cast <DataGridViewRow>() where Convert.ToBoolean(Rows.Cells[0].Value.ToString()) select Rows).ToList();
System.Text.StringBuilder sb2 = new System.Text.StringBuilder();
foreach (DataGridViewRow row in CheckedRows)
{
sb2.AppendLine(row.Cells[1].Value.ToString());
swmodel = swView.ReferencedDocument;
var configuration = swView.ReferencedConfiguration;
var sConfigName = swView.ReferencedConfiguration;
Configuration swConfig = swmodel.GetConfigurationByName(sConfigName);
for (var i = 0; i <= vConfName.GetUpperBound(0); i++)
{
const string ucase = "";
if (vConfName[i] == row.Cells[1].Value.ToString())
{
configuration = vConfName[i];
}
}
swView.ReferencedConfiguration = sConfigName;
myXml.WriteStartElement("config");
myXml.WriteAttributeString("value", row.Cells[1].Value.ToString());
/////////////////////////////////////////////////////////////
//
// PART
//
/////////////////////////////////////////////////////////////
for (lRow = lStartRow; lRow <= (lNumRow - 1); lRow++)
{
if (swBomTableAnnotation.GetComponentsCount2((int)lRow, row.Cells[1].Value.ToString(), out strItemNumber, out strPartNumber) > 0)
{
myXml.WriteStartElement("part");
//PathNameComponent
string strModelPathName = null;
var vModelPathNames = swBomTableAnnotation.GetModelPathNames((int)lRow, out strItemNumber, out strPartNumber);
if (((vModelPathNames != null)))
{
myXml.WriteStartElement("PathNameComponent");
foreach (var vModelPathName_loopVariable in vModelPathNames)
{
var vModelPathName = vModelPathName_loopVariable;
strModelPathName = vModelPathName;
myXml.WriteString(strModelPathName);
}
myXml.WriteEndElement();
}
//'\ Row
myXml.WriteStartElement("Row");
myXml.WriteString(Convert.ToString(lRow - lStartRow + 1));
myXml.WriteEndElement();
vModelPathNames = swBomTableAnnotation.GetModelPathNames((int)lRow, out strItemNumber, out strPartNumber);
//\ ItemNum
myXml.WriteStartElement("ItemNum");
myXml.WriteString(strItemNumber);
myXml.WriteEndElement();
//\ раздел
aa = 3;
/// раздел
sRowStr1 = "";
sRowStr1 = sRowStr1 + swTableAnnotation.Text[lRow, aa];
myXml.WriteStartElement("Раздел");
myXml.WriteString(sRowStr1);
myXml.WriteEndElement();
//\ обозначение
oo = 1;
/// обозначение
sRowStr2 = "";
sRowStr2 = sRowStr2 + swTableAnnotation.Text[lRow, oo];
myXml.WriteStartElement("Обозначение");
myXml.WriteString(sRowStr2);
myXml.WriteEndElement();
//\ наименование
Jj = 2;
/// наименование
sRowStr = "";
sRowStr = sRowStr + swTableAnnotation.Text[lRow, Jj];
myXml.WriteStartElement("Наименование");
myXml.WriteString(sRowStr);
myXml.WriteEndElement();
//\
tt = 4;
/// формат
sRowStr3 = "";
sRowStr3 = sRowStr3 + swTableAnnotation.Text[lRow, tt];
myXml.WriteStartElement("Формат");
myXml.WriteString(sRowStr3);
myXml.WriteEndElement();
//\
yy = 5;
/// ERP code
sRowStr4 = "";
sRowStr4 = sRowStr4 + swTableAnnotation.Text[lRow, yy];
myXml.WriteStartElement("ERP_code");
myXml.WriteString(sRowStr4);
myXml.WriteEndElement();
//\
uu = 6;
/// Код материала
sRowStr5 = "";
sRowStr5 = sRowStr5 + swTableAnnotation.Text[lRow, uu];
myXml.WriteStartElement("Код_материала");
myXml.WriteString(sRowStr5);
myXml.WriteEndElement();
//\
ss = 7;
/// наименование
sRowStr6 = "";
sRowStr6 = sRowStr6 + swTableAnnotation.Text[lRow, ss];
myXml.WriteStartElement("Примечание");
myXml.WriteString(sRowStr6);
myXml.WriteEndElement();
//\
myXml.WriteStartElement("Количество");
//myXml.WriteString(swTableAnnotation.GetComponentsCount2(lRow, strConfiguration, strItemNumber, strPartNumber))
myXml.WriteString(Convert.ToString(swBomTableAnnotation.GetComponentsCount2(lRow, row.Cells[1].Value.ToString(), out strItemNumber, out strPartNumber)));
myXml.WriteEndElement();
myXml.WriteEndElement();
//config
}
}
myXml.WriteEndElement(); //part
}
myXml.WriteEndElement(); //references
//<~~~~~~~~~~~~~~~~~~~~~~~~~~~ Get the Total Number of Rows
Annotation swAnn = default(Annotation);
TableAnnotation swTable = default(TableAnnotation);
long nNumRow = 0;
swmodel = swapp.ActiveDoc;
swView = swDraw.GetFirstView();
swTable = swView.GetFirstTableAnnotation();
swAnn = swTable.GetAnnotation();
nNumRow = swTable.RowCount;
myXml.WriteStartElement("TotalRows");
myXml.WriteString(Convert.ToString(nNumRow));
myXml.WriteEndElement();
//end TotalRows
myXml.WriteEndElement();
//Item
myXml.WriteEndElement();
//элемент XML
//End If
//заносим данные в myMemoryStream
myXml.Flush();
myXml.Close();
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
throw;
}
}
/// <summary>
/// 出工程图
/// </summary>
/// <param name="dicValues"></param>
/// <param name="prtTemp"></param>
/// <param name="compTemp"></param>
/// <param name="bomPaths"></param>
/// <param name="savePaths">保存路径</param>
/// <param name="newPath">新路径</param>
private void Drawing(List <string> dicValues, string prtTemp, string compTemp, string bomPaths, string savePaths, string newPath)
{
string viewType = string.Empty;
bool isometric = false;
bool bom = false;
string dimesion = string.Empty;
double spaceX = 0.06; //x方向留白区域
double scale = 1; //定义比例初始值
List <double[]> viewBox = new List <double[]>(); //集合存放视图box
List <double[]> viewOrigin = new List <double[]>(); //集合存放视图原点值
double[] outLine = new double[4]; //视图box值
double[] postion = new double[2]; //视图原点值
_swApp = (SldWorks)ConnectSW.iSwApp; //连接sw
if (_swApp == null)
{
return;
}
foreach (string item in dicValues)
{
int errors = 0;
int warnings = 0;
double view1X = 0;
double view1Y = 0;
string filePath = item; //文件路径
string fileEx = filePath.Substring(filePath.LastIndexOf("."), 7); //获得后缀名
string filename = filePath.Substring(filePath.LastIndexOf("\\") + 1, filePath.LastIndexOf(".") - filePath.LastIndexOf("\\") - 1);
if (fileEx == ".SLDPRT")
{
_swModelDoc = (ModelDoc2)_swApp.OpenDoc6(filePath, (int)swDocumentTypes_e.swDocPART, (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings);
__swDrawDoc = (DrawingDoc)_swApp.NewDrawing2((int)swDwgTemplates_e.swDwgTemplateCustom, prtTemp, (int)swDwgPaperSizes_e.swDwgPapersUserDefined, 0, 0);
}
if (fileEx == ".SLDASM")
{
_swModelDoc = (ModelDoc2)_swApp.OpenDoc6(filePath, (int)swDocumentTypes_e.swDocASSEMBLY, (int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings);
__swDrawDoc = (DrawingDoc)_swApp.NewDrawing2((int)swDwgTemplates_e.swDwgTemplateCustom, compTemp, (int)swDwgPaperSizes_e.swDwgPapersUserDefined, 0, 0);
}
_swModelEx = (ModelDocExtension)_swModelDoc.Extension;
if (newPath != null)
{
savePaths = newPath.Substring(0, newPath.LastIndexOf("\\"));
}
//新建工程图
_swApp.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swAutomaticScaling3ViewDrawings, true); //自动缩放新工程图比例
if (standarView == false && isometric) //如果只生成等轴测视图
{
CreatIsometric(__swDrawDoc, filePath);
_currentSheet = (Sheet)__swDrawDoc.GetCurrentSheet();
__swDrawDoc.ActivateSheet(_currentSheet.GetName());
_swView = __swDrawDoc.GetFirstView();
_swView = _swView.GetNextView();
ChangeViewShow(tag, _swView);
_swApp.CloseDoc(_swModelDoc.GetTitle());//
ModelDoc2 tempDoc = (ModelDoc2)__swDrawDoc;
bool ss0 = false;
if (newPath != null && IfDwg)
{
ss0 = tempDoc.Extension.SaveAs(newPath, (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else if (newPath != null && IfDwg == false)
{
ss0 = tempDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()).Substring(0, (_swModelDoc.GetTitle()).LastIndexOf(".")) + ".DWG", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else if (newPath == null && IfDwg)
{
ss0 = tempDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()).Substring(0, (_swModelDoc.GetTitle()).LastIndexOf(".")) + ".DWG", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else
{
ss0 = tempDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()).Substring(0, (_swModelDoc.GetTitle()).LastIndexOf(".")) + ".slddrw", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
bool isHidden = tempDoc.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swViewDisplayHideAllTypes, true); //隐藏所有类型
_swApp.CloseDoc(tempDoc.GetTitle());
_numSucess += 1; //转换成功的数量
sucessFile.Add(filePath);
return;
}
bool isCreate = false;
#region 第三视角投影
if (thirProject)
{
isCreate = __swDrawDoc.Create3rdAngleViews2(filePath);//创建第三视角投影视图(视图位置有差别)
//调整视图位置
_swView = __swDrawDoc.GetFirstView();
while (_swView != null)
{
double[] vBox = new double[] { };
double[] vPoint = new double[] { };
vBox = (double[])_swView.GetOutline();
vPoint = (double[])_swView.Position;
viewBox.Add(vBox);
viewOrigin.Add(vPoint);
_swView = _swView.GetNextView();
}
//调整视图1、2位置
if (viewBox[0][3] > viewBox[0][2])//纵向
{
double[] posView1 = new double[] { viewBox[0][2] / 3.0, viewOrigin[1][1] };
_swView = __swDrawDoc.GetFirstView();
_swView = _swView.GetNextView();
_swView.Position = posView1;
double[] posView2 = new double[] { viewOrigin[2][0], viewOrigin[2][1] - (viewBox[2][1] - viewBox[1][3]) / 1.9 };//调整视图2位置
_swView = _swView.GetNextView();
_swView.Position = posView2;
}
else
{
double[] posView1 = new double[] { viewBox[0][2] / 4.0, viewOrigin[1][1] };
_swView = __swDrawDoc.GetFirstView();
_swView = _swView.GetNextView();
_swView.Position = posView1;
double[] posView2 = new double[] { viewOrigin[2][0], viewOrigin[2][1] - (viewBox[2][1] - viewBox[1][3]) / 2.0 };//调整视图2位置
_swView = _swView.GetNextView();
_swView.Position = posView2;
}
viewOrigin.Clear();
viewBox.Clear();
_swView = __swDrawDoc.GetFirstView();
while (_swView != null)
{
double[] vBox = new double[] { };
double[] vPoint = new double[] { };
vBox = (double[])_swView.GetOutline();
vPoint = (double[])_swView.Position;
viewBox.Add(vBox);
viewOrigin.Add(vPoint);
_swView = _swView.GetNextView();
}
if (isometric)//等轴测
{
_swView = (IView)__swDrawDoc.CreateDrawViewFromModelView3(filePath, "*等轴测", viewOrigin[3][0], viewOrigin[2][1], 0);
_swView = __swDrawDoc.GetFirstView();
double[] sca = new double[2];
sca = _swView.ScaleRatio;//获取比例
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
_swView.ScaleRatio = sca;
double[] rePos = new double[] { viewOrigin[3][0] + 0.015, viewOrigin[2][1] };
_swView.Position = rePos;
ChangeViewShow(tag, _swView); //视图样式
AddDimension(dimesion, __swDrawDoc, _swModelDoc); //尺寸标注
}
}
#endregion
#region 第一视角投影
else
{
isCreate = __swDrawDoc.Create1stAngleViews(filePath);//创建第一视角投影视图
//获取视图boundingbox
_swView = __swDrawDoc.GetFirstView();
while ((_swView != null))
{
outLine = (double[])_swView.GetOutline(); //(x,y坐标最值)
postion = (double[])_swView.Position; //视图位置值
viewBox.Add(outLine);
viewOrigin.Add(postion);
_swView = _swView.GetNextView();
}
double newScale = CalcuScale(viewBox, __swDrawDoc, scale, spaceX, 3);
//调整视图位置（position）
if (viewBox[0][3] > viewBox[0][2])
{
view1X = viewBox[0][2] / 2.8; //视图1的X坐标放在图纸坐标的三分之一处
view1Y = viewBox[0][3] - viewBox[0][3] / 4.85; //视图1的Y坐标放在图纸坐标的五分之一处
}
else
{
view1X = viewBox[0][2] / 3.5; //视图1的X坐标放在图纸坐标的三分之一处
view1Y = viewBox[0][3] - viewBox[0][3] / 4.0; //视图1的Y坐标放在图纸坐标的四分之一处
}
double[] view1Pos = new double[] { view1X, view1Y };
_swView = __swDrawDoc.GetFirstView(); //获取图纸
_swView = _swView.GetNextView(); //获取第一个视图
_swView.Position = view1Pos;
bool isRebuild = _swModelDoc.EditRebuild3();
//viewBox.Clear();
List <double[]> tempBox = new List <double[]>();
viewOrigin.Clear();
while ((_swView != null))
{
ChangeViewShow(tag, _swView); //改变视图显示样式
AddDimension(dimesion, __swDrawDoc, _swModelDoc); //添加尺寸
outLine = (double[])_swView.GetOutline(); //(x,y坐标最值)
postion = (double[])_swView.Position; //视图位置值
tempBox.Add(outLine);
viewOrigin.Add(postion);
_swView = _swView.GetNextView();
}
if (isometric) //是否创建等轴测视图（非钣金）
{
double[] scalArry = new double[2];
_swView = (IView)__swDrawDoc.CreateDrawViewFromModelView3(filePath, "*等轴测", viewOrigin[2][0], viewOrigin[1][1], 0);
_swView = __swDrawDoc.GetFirstView(); //获取图纸
_swView = _swView.GetNextView(); //获取第一个视图
double sca = _swView.get_IScaleRatio();
if (sca == 1) //缩小比例
{
scalArry[0] = 1;
scalArry[1] = newScale;
}
else
{
scalArry[0] = sca;
scalArry[1] = 1;
}
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
_swView.ScaleRatio = scalArry;//调整轴测图比例
ChangeViewShow(tag, _swView);
_swModelDoc.EditRebuild3();
}
////关掉文件（不保存）
//_swApp.CloseDoc(_swModelDoc.GetTitle());
if (fileEx == ".SLDASM" && bom) //是否创建明细表
{
//viewBox.Clear();
//viewOrigin.Clear();
double[] outArry = new double[4];
double[] posArry = new double[2];
double[] posArry1 = null;
double[] posArry2 = null;
double[] posArry3 = null;
_currentSheet = (Sheet)__swDrawDoc.GetCurrentSheet();
__swDrawDoc.ActivateSheet(_currentSheet.GetName());
_swView = __swDrawDoc.GetFirstView(); //获取图纸
_swView = _swView.GetNextView(); //获取第一个视图
swBomTableAnno = (BomTableAnnotation)_swView.InsertBomTable4(true, 0.4, 0.1, (int)swBOMConfigurationAnchorType_e.swBOMConfigurationAnchor_BottomRight, (int)swBomType_e.swBomType_TopLevelOnly, "", bomPaths, false, 0, false);
TableAnnotation tableAnnotation = (TableAnnotation)swBomTableAnno;
tableAnnotation.GetAnnotation();
BomFeature bomFeature = swBomTableAnno.BomFeature;
bool[] array = new bool[bomFeature.GetConfigurationCount(false)];
object Visible = array;
object configurations = bomFeature.GetConfigurations(false, ref Visible);
array[0] = true;
bomFeature.SetConfigurations(true, array, configurations);
FeatureManager featureManager = _swModelDoc.FeatureManager;
featureManager.UpdateFeatureTree();
double num = 0.007;
tableAnnotation.SetRowHeight(-2, num, 0);
double totleHeight = num * tableAnnotation.RowCount; //计算总的tableBom高度
double heightSum = totleHeight + 0.070; //加上标题栏总高度
int columCount = tableAnnotation.ColumnCount; //获取总的列数
double columWidth = 0;
for (int i = 0; i < columCount; i++)
{
double wid = tableAnnotation.GetColumnWidth(i);
columWidth += wid;
}
_swView = _swView.GetNextView();
_swView = _swView.GetNextView();
outArry = (double[])_swView.GetOutline();
if (outArry[1] < heightSum)//有可能被遮挡
{
//__swView = _swDrawDoc.GetFirstView();
//double[] tempArry = new double[] { };
//tempArry=(double[])__swView.GetOutline();
//viewBox.Insert(0, tempArry);
scale = ((viewBox[1][2] - viewBox[1][0]) + (viewBox[3][2] - viewBox[3][0])) / (viewBox[0][2] - columWidth - 0.025);//计算X方向的比例
if (scale > 11)
{
double scaleCeil = System.Math.Ceiling(scale);
if (scaleCeil > 11 && scaleCeil < 16)
{
scale = 20;
}
if (scaleCeil > 15 && scaleCeil < 21)
{
scale = 25;
}
if (scaleCeil > 20 && scaleCeil < 26)
{
scale = 30;
}
if (scaleCeil > 25 && scaleCeil < 34)
{
scale = 40;
}
if (scaleCeil > 33 && scaleCeil < 45)
{
scale = 50;
}
if (scaleCeil > 44 && scaleCeil < 55)
{
scale = 60;
}
}
else if (scale > 5.8 && scale < 10.5)
{
double scaleCeil = System.Math.Ceiling(scale);
//scale = scaleCeil + 4.0; //比例为10、11、12、13、14、15
if (scaleCeil > 5 && scaleCeil < 8)
{
scale = 10;
}
if (scaleCeil > 7 && scaleCeil < 12)
{
scale = 15;
}
}
_currentSheet = (Sheet)__swDrawDoc.GetCurrentSheet();
__swDrawDoc.ActivateSheet(_currentSheet.GetName());
bool isScale = _currentSheet.SetScale(1, scale, false, false); //设置视图和图纸比例
_swView = __swDrawDoc.GetFirstView();
_swView = _swView.GetNextView(); //获取视图1
double[] pos1 = new double[2];
pos1 = _swView.Position;
posArry1 = new double[] { pos1[0] - columWidth / 3.45, pos1[1] };
_swView.Position = posArry1; //重置视图1的位置
_swView = _swView.GetNextView(); //获取视图2
double[] pos2 = new double[2];
pos2 = _swView.Position;
posArry2 = new double[] { pos2[0] - columWidth / 3.45, pos2[1] + 0.0015 };
_swView.Position = posArry2; //设置视图2位置
_swView = _swView.GetNextView(); //获取视图三
posArry = (double[])_swView.Position;
posArry3 = new double[] { posArry[0] - columWidth / 3.5, posArry[1] };
_swView.Position = posArry3;//视图3坐标
}
}
}//第一视角投影
#endregion
if (isCreate)
{
_numSucess += 1;//转换成功的数量
sucessFile.Add(filePath);
}
ModelDoc2 tempModelDoc = (ModelDoc2)__swDrawDoc; //获取到swDraw的父级（ModelDoc）
_swApp.CloseDoc(_swModelDoc.GetTitle());
bool isHiden = tempModelDoc.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swViewDisplayHideAllTypes, true); //隐藏所有类型
_swModelDoc.ForceRebuild3(false);
string saveName = (_swModelDoc.GetTitle()).Substring(0, (_swModelDoc.GetTitle()).LastIndexOf("."));
bool ss;
if (newPath != null && IfDwg)
{
ss = tempModelDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()) + ".DWG", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else if (newPath != null && IfDwg == false)
{
ss = tempModelDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()) + ".slddrw", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else if (newPath == null && IfDwg)
{
ss = tempModelDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()) + ".DWG", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
else
{
ss = tempModelDoc.Extension.SaveAs(savePaths + "\\" + (_swModelDoc.GetTitle()) + ".slddrw", (int)swSaveAsVersion_e.swSaveAsCurrentVersion, (int)swSaveAsOptions_e.swSaveAsOptions_Silent, null, ref errors, ref warnings);
}
_swApp.CloseDoc(tempModelDoc.GetTitle());//关闭转换完成的文件
}
}
